You are on page 1of 6

Introduction: Give a brief introduction to the topic on which you are working, along with

background information and supporting technologies.

The page margin setup should be as provided herein (Top: 1 Inch, Bottom: 1.5 Inches, Left:
1.25 Inches, Right: 0.75 Inches). The complete document should be in Times New Roman
font with font size 12. The Headings should be in same font size but Bold. Spacing before
and after the paragraph should be 6 points. Line spacing should be 1.5 points. Same should be
followed for Figure and Figure Caption, but size of figure caption should be 10 points. The
figure file should be inserted in image format only. Figure should be in between the content
and figure size should be appropriate and legible with the content of the particular page. All
flowcharts should be included/considered as Figures. Spacing before/after table caption
should be 6 points. However, inside the table the space should not be more than 3 points.
Font size for the table should be 10. All the figures and tables should be properly embedded
in the document. Complete document should be justified apart from the Figure, Figure
caption, Tables and Table Caption (all should be centre aligned).

(2-3 Paragraphs)

Literature Review: Critical literature review is performed focusing on the different aspects
related to the OLED. Fig. 1 below

Fig. 1 Different aspects related to the OLED that are reviewed

(Atleast 10-15 publications should be reviewed with proper citations)

Research Gaps and Objectives:

(i) Research Gaps:

Some of the primary research gaps identified through the literature review are discussed in
the following points:

1. Presently, the
2.
3.

1
(Atleast 2-3 research gaps should be provided)

(ii) Objectives:

The main objective of the research work is to …

This can be divided into following sub problems:

1. To investigate...
2. To explore the ...
3. To analyze ...

4. To realize ...

(Atleast 2-3 objectives should be provided)

Organization of Report: The report is organized in _____ chapters as follows:

Chapter-1 gives the introduction of ...

Chapter-2 puts forward a detailed time-based advancements related to different aspects of ...

Chapter-3 focuses on ...

Chapter-4 analyses the ...

Chapter-5 presents the ...

Chapter-6 investigates ...

Chapter-7 concludes the report ...

(Chapters number can vary according to the objectives proposed)

2
Chapter 1

INTRODUCTION AND STATEMENT OF PROBLEM

Organic electronics is a

Fig. 2 Comparison of organic and conventional silicon-based technology

The OSC.
(Provide figures, flowchart, algorithms to support your work)

Chapter 2

LITERATURE REVIEW

Organic electronics ...

(a) Characteristic Parameters …

(b) Structure: …

(c) Materials: The performance …

(d) Models: Mathematical models ….

(e) Applications …

(Provide figures, flowchart, algorithms to support your work)

Chapter 3

ANALYSIS …

Table 1 Comparison of

Parameters Current Density Luminescence


(mA/cm ) 2
(cd/m2)
Device Name
Device C

3
Device D
Device E

The multi-layered ….

(Provide figures, flowchart, algorithms to support your work)

Chapter 4

ANALYSIS OF …

First, two devices

Fig. 7 Devices F, G, H, & I results: (a) Current density and (b) Luminescence versus Anode Voltage

(Format for Figure Caption & Spacing and its font size)

Novel device ...

(Provide figures, flowchart, algorithms to support your work)

Chapter 5

AN ANALYTICAL ANALYSIS

Analytical modeling …

Fig. 9 Combined plots for simulated and analytical electric field for Device G

(Format for Figure Caption & Spacing and its font size)

Fig. 11 Combined plots for simulated and analytical results (a) Electron and (b) Hole current density

The model ….
(Provide figures, flowchart, algorithms to support your work)

Chapter 6

ANALYSIS OF…

Sensors are ….

Table 2 Comparison of excitation and fluorescence emission from healthy human and oncological patient

Excitation Fluorescence Fluorescence Outcome

4
Wavelength Emission at 420 nm Emission at 440 nm
330 nm High Low Normal Human
370 nm Low High Oncological Patient

(Format for Table Caption & Spacing and its font size. Additionally format for table structure)

Thereafter, ….

(Provide figures, flowchart, algorithms to support your work)

List of Publications

International Journals

[1] Negi, S., Mittal, P., and Kumar, B. “Impact of different layers on performance of
OLED”, Microsystem Technologies, 24(12), 4981-4989, 2018. (Publisher: Springer
Berlin Heidelberg, SCI Impact Factor: 1.581,
https://link.springer.com/article/10.1007/s00542-018-3918-y).
(Format for providing publication Details if any in journal)
[2]

International Conferences

[1] Negi, S., Mittal, P., and Kumar, B. “Detection of Ovarian Cancer using Organic Light
Emitting Diodes” in IEEE Uttar Pradesh Section International Conference on
Electrical, Electronics and Computer Engineering, (UPCON-2018), Nov. 2-4, 2018,
Gorakhpur, Uttar Pradesh, India.
(Format for providing publication Details if any in conference)
[2]
[3]

5
REFERENCES

[1] Kumar, B., Kaushik, B. K., and Negi, Y. S. “Static and dynamic analysis of organic
and hybrid inverter circuits”, Journal of Computational Electronics, vol. 12(4),
pp.765-774, 2013. (Reference Format for Journals)
[2] Negi, S., Mittal, P., and Kumar, B. “Detection of Ovarian Cancer using Organic Light
Emitting Diodes” in IEEE Uttar Pradesh Section International Conference on
Electrical, Electronics and Computer Engineering, (UPCON-2018), Nov. 2-4, 2018,
Gorakhpur, Uttar Pradesh, India.
(Reference Format for Conference)

[3] Kumar, B.,

You might also like