Professional Documents
Culture Documents
1 2 3 4
Double zip
provides liquid
tight seal
Prior to donning the suit Donning the suit Putting on safety footwear Zipping up the suit
• Always follow manufacturer’s • Shake the coverall to make the suit • Sitting down, roll up the legs of the • Zip up the red inner zip first
instructions for use easier to put on coverall • Tuck in the inner protection flap
• Use a designated changing area - • Remove unnecessary bulky • Put on your required safety • Zip up the outer zip fully, pulling
free from contamination clothing and objects from pockets footwear the zip to the top
• Check size and protection level of • Remove jewellery • Roll down each suit leg to cover • To assist with zips, use the Buddy
the chemical suit • Sit down and remove footwear the lower leg and ankle System if required
• Open packaging carefully - do not • Tuck trousers in to socks • Do not tuck the suit leg into your • For full spray and particle
use knives or sharp objects • Insert leg in to coverall ensuring footwear protection use impermeable
• Read user instructions carefully toes are pointed • Tape the coverall hem to your chemical tape
• Visually inspect your coverall • Pull chemical suit up to the waist footwear above your ankle
• Check for holes/tears and inspect • Insert each arm and pull zipper up • Taping the footwear below the
seams and zips half way ankle may restrict your movement
• Do not wear if damaged
5 6 7 8
Don the respirator Donning protective gloves AlphaTec® Glove Connector / Taping
• Always follow the manufacturer’s • Always wear the correct gloves for • The AlphaTec® Glove Connector
instructions for use the application in accordance with should be worn to provide a liquid
• Pull up the hood ensuring there are the manufacturer’s instructions tight seal
no gaps for use • Alternatively, the outer sleeve
• Ensure the respirator fits • Inspect the gloves for any defects should be taped using an
comfortably around the face and imperfections impermeable chemical tape
• For full spray and particle • Fold back the elasticated outer
protection use impermeable suit sleeve
chemical tape • Pull the gloves on one at a time
• To assist with taping, use the Buddy and ensure the glove fits well
System if required • Return the outer suit sleeve to its
Final checks
original position
• Buddy and wearer check the suit
• Wear an inner glove if required to
for fit and comfort
give additional protection