Professional Documents
Culture Documents
testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Seat No -
Total number of questions : 60
PWD12235_STRUCTURAL ANALYSIS II
Time : 1hr
Max Marks : 50
N.B
1) All questions are Multiple Choice Questions having single correct option.
7) Use only black/blue ball point pen to darken the appropriate circle.
Q.no 1. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
Q.no 2. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 1/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 5. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
Q.no 6. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
Q.no 8. The carryover factor in a prismatic member whose far end is over hanging
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 2/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:0
B : 0.5
C : 0.75
D:1
C : Number of joints
D : Number of Reactions
D : Unknown Forces
B : Macauly's Method
D : Kennedy’s theory
A : positive or negative
B : Not predicated
C : negative
D : positive
A : Zero
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 3/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Maximum
C : Minimum
D : Can't say
Q.no 14. If n x n square Flexibility matrix, then ‘n’ value represent ________________
A : Number of joints
D : Number of member
A : Force method
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
Q.no 16. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
A:3
B:2
C:0
D:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 4/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:4
C:2
D:1
Q.no 19. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 20. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 21. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 5/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 22. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Displacements
B : Forces
D : Unit force
A : Rectangular matrix
B : Null matrix
Q.no 25. In a member , the number of non zero joint displacement is called as
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
A : Static Indeterminacy
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
Q.no 28. Ratio of stiffness of member to the total stiffness of the joint is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 29. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
C : at one end
D : at quarter span
A : Force Method
B : Displacement Method
D : Moment Method
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 7/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 31. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 32. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
B : 35.55
C : 3.55
D : 0.355
Q.no 33. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
D : 0.4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 8/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 34.
A:
B:
C:
D:
Q.no 35. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
A:0
B:1
C:2
D:3
Q.no 36. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BA member
A : 0.125 I
B : 0.1 I
C : 0.5 I
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 9/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 0.2 I
Q.no 37. A beam AB having point load of 100 kN at a distance of 4 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 64.44
B : 54.44
C : 44.44
D : 34.44
Q.no 38. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 39. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 40. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
D : 25
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 10/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 41. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 42. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
D : 40
Q.no 43. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 11/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:0
D : 1.2
Q.no 44. A beam having UDl of 50 kN per m over a span of 4 m. Find Fixed end moment in
KN.m
A : 66.67
B : 6.67
C : 666.67
D : 68
Q.no 45. In a two span Continous Beam ABC, with one external support 'A' fixed and other
external support 'C' is hinged. Then how many number of Joint Equilibrium equations can be
formed ?
A:3
B:2
C:0
D:1
Q.no 46.
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 12/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 47. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
Q.no 48.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 13/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 49. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'B' will be
A : 100
B : 50
C : 75
D : 25
Q.no 50. For the beam shown in figure, the stiffness of member CB is equal to _________
A:
B:
C:
D:
Q.no 51.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 14/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 52. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
Q.no 53.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 15/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 54. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 55.
Q.no 56. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 16/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 57.
A:
B:
C:
D:
Q.no 58. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
D : L per EI
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 17/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 59.
A : 0 and 91.53
B : 1 and 91.53
Q.no 60.
A:
B:
C:
D:
Q.no 1. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 18/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:2
C:0
D:1
A : Null Matrix
B : Unit Martrix
Q.no 4. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
Q.no 6. Which of the following methods of structural analysis is not 'Displacement Method'
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 19/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 7. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
Q.no 8. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
A : Support Reactions
B : Displacements
C : SFD
D : BMD
Q.no 10. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
B : Minimum
C : Zero
D : Can't say
Q.no 11. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 20/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : at one end
D : at quarter span
Q.no 12. In a member , the number of non zero joint displacement is called as
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
A : Displacements
B : Forces
D : Unit force
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
Q.no 15. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
A : Zero
B : Maximum
C : Minimum
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 21/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : Can't say
A : Force method
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
Q.no 18. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
B : Macauly's Method
D : Kennedy’s theory
D : Unknown Forces
Q.no 21. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 22/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 22. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
A : Rectangular matrix
B : Null matrix
A:3
B:2
C:0
D:1
A : Force Method
B : Displacement Method
D : Moment Method
A : Static Indeterminacy
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 23/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 27. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
Q.no 28. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
Q.no 29. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 31. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 24/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 0.2 I
Q.no 32. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 33.
A:
B:
C:
D:
Q.no 34. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 25/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:1
D:4
Q.no 35. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
A:
B:
C:
D:
Q.no 36. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
A:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 26/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : 0.2
C : 0.6
D : 0.4
Q.no 37. For a beam whose near end is simply supported and far end is also simply supported,
the stiffness is equal to ________
A:
B:
C:
D:
Q.no 38. For the beam shown in figure, if support ‘A’ moves in upward direction through unit
displacement, the reaction developed at the support 'A' will be equal to _____
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 27/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 39. Three prismatic membres AB,BC & BD meet at a joint for rigid frame to be analysed
using moment distribution method. The distribution factor for member AB & BC are 0.5 & 0.3
respectively. The distribution factor for member BD shall be
A : 0.2
B : 1.67
C : 0.6
D : 0.15
Q.no 41.
A:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 28/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:
C:
D:
Q.no 42. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
A:3
B:2
C:0
D:1
Q.no 43. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 44. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'A' will be
A : 100
B : 50
C : 75
D : 25
Q.no 46. In a three span Continous Beam ABCD, with both external supports 'A' & 'D' are fixed.
Then how many number of Joint Equilibrium equations can be formed ?
A:3
B:2
C:0
D:1
Q.no 47. In a two span Continous Beam ABC, with one external support 'A' fixed and other
external support 'C' is hinged. Then how many number of Joint Equilibrium equations can be
formed ?
A:3
B:2
C:0
D:1
Q.no 48.
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 30/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 49. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
B : 35.55
C : 3.55
D : 0.355
Q.no 50. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 51.
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 31/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 52.
A : 0 and 91.53
B : 1 and 91.53
Q.no 53. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 32/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 54. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 55.
A:
B:
C:
D:
Q.no 56. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 33/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : L per EI
Q.no 57.
A:
B:
C:
D:
Q.no 58.
A : 0 and 91.53
B : 1 and 91.53
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 34/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 59. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
Q.no 60. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
A : Support Reactions
B : Displacements
C : SFD
D : BMD
C : Number of joints
D : Number of Reactions
Q.no 3. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 35/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : Distribution Factor
Q.no 4. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
A:3
B:4
C:2
D:1
Q.no 7. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
C:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 36/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:1
Q.no 8. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
Q.no 11. If n x n square Flexibility matrix, then ‘n’ value represent ________________
A : Number of joints
D : Number of member
Q.no 12. Which of the following methods of structural analysis is not 'Displacement Method'
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 37/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 13. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
Q.no 14. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 16. Ratio of stiffness of member to the total stiffness of the joint is known as
B : Stiffness Factor
C : Distribution Factor
A : positive or negative
B : Not predicated
C : negative
D : positive
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 38/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Null Matrix
B : Unit Martrix
Q.no 19. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
A:3
B:2
C:0
D:1
Q.no 21. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
Q.no 22. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
C : at one end
D : at quarter span
A : Rectangular matrix
B : Null matrix
A : Displacements
B : Forces
D : Unit force
Q.no 25. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
B : Minimum
C : Zero
D : Can't say
A : Force Method
B : Displacement Method
D : Moment Method
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Force method
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 40/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
Q.no 29. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
B : Macauly's Method
D : Kennedy’s theory
Q.no 31. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
A:0
B:1
C:2
D:3
Q.no 32.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 41/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 33. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
A:3
B:2
C:1
D:4
Q.no 34. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
D : 0.2 I
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 42/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 35. For the beam shown in figure, the stiffness of member CB is equal to _________
A:
B:
C:
D:
Q.no 36. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
C:0
D : 1.2
Q.no 37. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
A:1
B : 0.2
C : 0.6
D : 0.4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 43/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 38. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
D : 40
Q.no 39. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 44/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 40. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 41. A beam having UDl of 50 kN per m over a span of 4 m. Find Fixed end moment in
KN.m
A : 66.67
B : 6.67
C : 666.67
D : 68
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 45/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 42.
A:
B:
C:
D:
Q.no 43. A beam AB having point load of 100 kN at a distance of 4 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 64.44
B : 54.44
C : 44.44
D : 34.44
Q.no 44. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 46/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 45. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 46. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BA member
A : 0.125 I
B : 0.1 I
C : 0.5 I
D : 0.2 I
Q.no 47. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 47/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 48. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'B' will be
A : 100
B : 50
C : 75
D : 25
Q.no 49.
A:
B:
C:
D:
Q.no 50. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 48/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 25
Q.no 51. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
D:
Q.no 52. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 49/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 53.
A:
B:
C:
D:
Q.no 54.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 50/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 55.
Q.no 56.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 51/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 57.
A : 0 and 91.53
B : 1 and 91.53
Q.no 58. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 59. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 52/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 13.33
Q.no 60.
A:
B:
C:
D:
Q.no 1. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
Q.no 2. Which of the following methods of structural analysis is not 'Displacement Method'
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 53/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Number of joints
D : Number of member
A:3
B:4
C:2
D:1
Q.no 5. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
Q.no 6. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
A : Static Indeterminacy
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 54/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
Q.no 9. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 10. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 12. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 55/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Flexural equation
B : Torsional equation
D : Compatibility equation
D : Unknown Forces
Q.no 15. In a member , the number of non zero joint displacement is called as
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
Q.no 16. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 56/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 18. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
Q.no 20. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Support Reactions
B : Displacements
C : SFD
D : BMD
A : Stiffness
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 57/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Flexibility
C : Rigidity
D : Stress
Q.no 23. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
Q.no 24. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
C : Number of joints
D : Number of Reactions
B : Macauly's Method
D : Kennedy’s theory
Q.no 27. Maximum slope in simply supported beam with a central point load 'W' kN will be
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 58/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : at both support
B : at centre
C : at one end
D : at quarter span
A:3
B:2
C:0
D:1
Q.no 29. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
B : Minimum
C : Zero
D : Can't say
A : Zero
B : Maximum
C : Minimum
D : Can't say
Q.no 31. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 32. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 59/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:0
D:1
Q.no 33.
A:
B:
C:
D:
Q.no 34. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 60/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 35. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 36. In a two span Continous Beam ABC, with one external support 'A' fixed and other
external support 'C' is hinged. Then how many number of Joint Equilibrium equations can be
formed ?
A:3
B:2
C:0
D:1
Q.no 37. For a beam whose near end is simply supported and far end is also simply supported,
the stiffness is equal to ________
A:
B:
C:
D:
Q.no 38. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 61/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : 75
D : 25
Q.no 39. In a three span Continous Beam ABCD, with both external supports 'A' & 'D' are fixed.
Then how many number of Joint Equilibrium equations can be formed ?
A:3
B:2
C:0
D:1
Q.no 41. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'A' will be
A : 100
B : 50
C : 75
D : 25
Q.no 43. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 62/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : 35.55
C : 3.55
D : 0.355
Q.no 44.
A:
B:
C:
D:
Q.no 45. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
C:0
D : 1.2
Q.no 46. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 63/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 47. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
Q.no 48. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
A:3
B:2
C:1
D:4
Q.no 49. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 64/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 0.2 I
Q.no 50.
A:
B:
C:
D:
Q.no 51. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 65/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 52.
A : 0 and 91.53
B : 1 and 91.53
Q.no 53.
A:
B:
C:
D:
Q.no 54. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 66/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : EI per L
D : L per EI
Q.no 55.
Q.no 56. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 67/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 57.
A:
B:
C:
D:
Q.no 58. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 68/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 59.
Q.no 60. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
A : Null Matrix
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 69/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Unit Martrix
Q.no 2. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
A : Rectangular matrix
B : Null matrix
Q.no 4. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 5. Which of the following methods of structural analysis is not 'Displacement Method'
A : Displacements
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 70/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Forces
D : Unit force
A:3
B:4
C:2
D:1
Q.no 9. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
A : positive or negative
B : Not predicated
C : negative
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 71/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : positive
Q.no 11. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
A : Force Method
B : Displacement Method
D : Moment Method
Q.no 13. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
Q.no 14. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
Q.no 15. If n x n square Flexibility matrix, then ‘n’ value represent ________________
A : Number of joints
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 72/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : Number of member
A : Static Indeterminacy
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
Q.no 17. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 18. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
Q.no 19. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 20. Ratio of stiffness of member to the total stiffness of the joint is known as
B : Stiffness Factor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 73/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : Distribution Factor
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
A : Force method
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
D : Unknown Forces
A : Support Reactions
B : Displacements
C : SFD
D : BMD
Q.no 25. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 74/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:0
D:1
Q.no 26. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
Q.no 27. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
Q.no 28. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
Q.no 30. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
B : Minimum
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 75/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : Zero
D : Can't say
Q.no 31. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 32.
A:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 76/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:
C:
D:
Q.no 33.
A:
B:
C:
D:
Q.no 34. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 77/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 0.4
Q.no 35. For the beam shown in figure, if support ‘A’ moves in upward direction through unit
displacement, the reaction developed at the support 'A' will be equal to _____
A:
B:
C:
D:
Q.no 36. A beam having UDl of 50 kN per m over a span of 4 m. Find Fixed end moment in
KN.m
A : 66.67
B : 6.67
C : 666.67
D : 68
Q.no 37. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'B' will be
A : 100
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 78/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : 50
C : 75
D : 25
Q.no 38. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 39. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 40. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 41. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
D : 40
Q.no 42. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 79/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:0
B:1
C:2
D:3
Q.no 43. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 44.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 80/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 45. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
A:3
B:2
C:0
D:1
Q.no 46. Three prismatic membres AB,BC & BD meet at a joint for rigid frame to be analysed
using moment distribution method. The distribution factor for member AB & BC are 0.5 & 0.3
respectively. The distribution factor for member BD shall be
A : 0.2
B : 1.67
C : 0.6
D : 0.15
Q.no 47. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 81/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:1
C:2
D:3
Q.no 48. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
A:
B:
C:
D:
Q.no 49. A beam AB having point load of 100 kN at a distance of 4 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 64.44
B : 54.44
C : 44.44
D : 34.44
Q.no 50. For the beam shown in figure, the stiffness of member CB is equal to _________
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 82/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 51. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 52. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 83/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 53.
A:
B:
C:
D:
Q.no 54.
A : 0 and 91.53
B : 1 and 91.53
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 84/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 55.
A : 0 and 91.53
B : 1 and 91.53
Q.no 56.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 85/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 57.
Q.no 58.
A:
B:
C:
D:
Q.no 59. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 86/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 60.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 87/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:0
D:1
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
A : Displacements
B : Forces
D : Unit force
Q.no 4. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
Q.no 5. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
Q.no 6. Maximum slope in simply supported beam with a central point load 'W' kN will be
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 88/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : at both support
B : at centre
C : at one end
D : at quarter span
C : Number of joints
D : Number of Reactions
B : Macauly's Method
D : Kennedy’s theory
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
A : Zero
B : Maximum
C : Minimum
D : Can't say
A:3
B:4
C:2
D:1
Q.no 15. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 90/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:0
D:1
Q.no 16. Which of the following methods of structural analysis is not 'Displacement Method'
A : Rectangular matrix
B : Null matrix
A : Null Matrix
B : Unit Martrix
Q.no 19. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
A : Force Method
B : Displacement Method
D : Moment Method
Q.no 21. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 24. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
Q.no 25. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 92/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Static Indeterminacy
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
Q.no 27. If n x n square Flexibility matrix, then ‘n’ value represent ________________
A : Number of joints
D : Number of member
A : positive or negative
B : Not predicated
C : negative
D : positive
Q.no 29. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
D : Unknown Forces
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 93/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 31. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'A' will be
A : 100
B : 50
C : 75
D : 25
Q.no 32. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
D : 0.2 I
Q.no 33. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
A:3
B:2
C:1
D:4
Q.no 34. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 94/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 35.
A:
B:
C:
D:
Q.no 36. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
B : 35.55
C : 3.55
D : 0.355
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 95/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 37. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
C:0
D : 1.2
Q.no 39. For a beam whose near end is simply supported and far end is also simply supported,
the stiffness is equal to ________
A:
B:
C:
D:
Q.no 40. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BA member
A : 0.125 I
B : 0.1 I
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 96/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : 0.5 I
D : 0.2 I
Q.no 41. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
Q.no 42. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 43. In a three span Continous Beam ABCD, with both external supports 'A' & 'D' are fixed.
Then how many number of Joint Equilibrium equations can be formed ?
A:3
B:2
C:0
D:1
Q.no 44. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 45. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 97/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : 50
C : 75
D : 25
Q.no 46. Three prismatic membres AB,BC & BD meet at a joint for rigid frame to be analysed
using moment distribution method. The distribution factor for member AB & BC are 0.5 & 0.3
respectively. The distribution factor for member BD shall be
A : 0.2
B : 1.67
C : 0.6
D : 0.15
Q.no 47. For the beam shown in figure, if support ‘A’ moves in upward direction through unit
displacement, the reaction developed at the support 'A' will be equal to _____
A:
B:
C:
D:
Q.no 48. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 98/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:0
B:1
C:2
D:3
Q.no 49.
A:
B:
C:
D:
Q.no 50. A beam having UDl of 50 kN per m over a span of 4 m. Find Fixed end moment in
KN.m
A : 66.67
B : 6.67
C : 666.67
D : 68
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 99/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 51. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
D:
Q.no 52. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
Q.no 53. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 100/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : 10
D : 13.33
Q.no 54. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
D : L per EI
Q.no 55.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 101/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 56.
A : 0 and 91.53
B : 1 and 91.53
Q.no 57.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 102/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 58.
Q.no 59.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 103/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 60.
Q.no 1. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
A : Force method
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
A : Support Reactions
B : Displacements
C : SFD
D : BMD
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 104/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 4. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
Q.no 5. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 6. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
C : Number of joints
D : Number of Reactions
Q.no 8. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 105/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:0
D:1
Q.no 9. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Displacements
B : Forces
D : Unit force
Q.no 11. In a member , the number of non zero joint displacement is called as
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
A:3
B:2
C:0
D:1
Q.no 13. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
B : Minimum
C : Zero
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 106/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : Can't say
Q.no 14. Ratio of stiffness of member to the total stiffness of the joint is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 15. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
Q.no 16. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
Q.no 17. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
C : at one end
D : at quarter span
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 107/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 19. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Null Matrix
B : Unit Martrix
Q.no 23. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 108/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Force Method
B : Displacement Method
D : Moment Method
Q.no 25. Which of the following methods of structural analysis is not 'Displacement Method'
Q.no 26. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
A : Rectangular matrix
B : Null matrix
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 29. If n x n square Flexibility matrix, then ‘n’ value represent ________________
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 109/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Number of joints
D : Number of member
Q.no 30. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 31. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 32. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 110/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:0
D:1
Q.no 33. For the beam shown in figure, the stiffness of member CB is equal to _________
A:
B:
C:
D:
Q.no 34. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
D : 0.4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 111/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 35. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 36. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'A' will be
A : 100
B : 50
C : 75
D : 25
Q.no 37. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 112/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:1
D:4
Q.no 38.
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 113/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 39. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 40. A beam AB having point load of 100 kN at a distance of 4 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 64.44
B : 54.44
C : 44.44
D : 34.44
Q.no 41.
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 114/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 42. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'B' will be
A : 100
B : 50
C : 75
D : 25
Q.no 43. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
A:0
B:1
C:2
D:3
Q.no 44. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 45. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 115/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 40
Q.no 46. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
D : 0.2 I
Q.no 47.
A:
B:
C:
D:
Q.no 48. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 116/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 49. In a two span Continous Beam ABC, with one external support 'A' fixed and other
external support 'C' is hinged. Then how many number of Joint Equilibrium equations can be
formed ?
A:3
B:2
C:0
D:1
Q.no 51. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 117/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 13.33
Q.no 52.
A:
B:
C:
D:
Q.no 53. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 118/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 54.
A : 0 and 91.53
B : 1 and 91.53
Q.no 55.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 119/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 56. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 57.
A : 0 and 91.53
B : 1 and 91.53
Q.no 58.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 120/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 59. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 121/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 60.
A:
B:
C:
D:
Q.no 1. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
Q.no 2. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
A : Static Indeterminacy
B : Stiffness
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 122/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C : Flexibility
D : Kinematic Indeterminacy
Q.no 4. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 5. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
Q.no 6. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
A : Force method
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 123/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
A : positive or negative
B : Not predicated
C : negative
D : positive
Q.no 11. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
A : Support Reactions
B : Displacements
C : SFD
D : BMD
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 124/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : Unknown Forces
B : Macauly's Method
D : Kennedy’s theory
A:3
B:4
C:2
D:1
Q.no 17. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 125/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:1
A : Rectangular matrix
B : Null matrix
C : Number of joints
D : Number of Reactions
A:3
B:2
C:0
D:1
Q.no 22. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
C : at one end
D : at quarter span
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 126/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Zero
B : Maximum
C : Minimum
D : Can't say
Q.no 24. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 25. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
Q.no 26. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
Q.no 27. Which of the following methods of structural analysis is not 'Displacement Method'
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 127/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Force Method
B : Displacement Method
D : Moment Method
Q.no 29. Ratio of stiffness of member to the total stiffness of the joint is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 30. In a member , the number of non zero joint displacement is called as
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
Q.no 31. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
B : 35.55
C : 3.55
D : 0.355
Q.no 32. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
D : 25
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 128/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 33. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 35.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 129/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 36. For the beam shown in figure, if support ‘A’ moves in upward direction through unit
displacement, the reaction developed at the support 'A' will be equal to _____
A:
B:
C:
D:
Q.no 37. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 38. Three prismatic membres AB,BC & BD meet at a joint for rigid frame to be analysed
using moment distribution method. The distribution factor for member AB & BC are 0.5 & 0.3
respectively. The distribution factor for member BD shall be
A : 0.2
B : 1.67
C : 0.6
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 130/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 0.15
Q.no 39. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
C:0
D : 1.2
Q.no 40. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
Q.no 41.
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 131/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 42. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BA member
A : 0.125 I
B : 0.1 I
C : 0.5 I
D : 0.2 I
Q.no 43. A beam having UDl of 50 kN per m over a span of 4 m. Find Fixed end moment in
KN.m
A : 66.67
B : 6.67
C : 666.67
D : 68
Q.no 44. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 45. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 132/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 46. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 47. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
A:0
B:1
C:2
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 133/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:3
Q.no 48. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 49. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 50. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
D : 40
Q.no 51.
Q.no 52.
A:
B:
C:
D:
Q.no 53. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
Q.no 54. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
D : L per EI
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 135/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 55.
A:
B:
C:
D:
Q.no 56. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 136/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 57. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 58.
A : 0 and 91.53
B : 1 and 91.53
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 137/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 59.
Q.no 60.
A:
B:
C:
D:
Q.no 1. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 138/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Flexural equation
B : Torsional equation
D : Compatibility equation
Q.no 2. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 3. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 4. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 139/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Maximum
B : Minimum
C : Zero
D : Can't say
Q.no 7. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 8. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
A : Displacements
B : Forces
D : Unit force
Q.no 11. If n x n square Flexibility matrix, then ‘n’ value represent ________________
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 140/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Number of joints
D : Number of member
Q.no 12. The summation of Distribution factors of all members connected at same joint is always
A:0
B : 0.5
C : 0.75
D:1
Q.no 13. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
A : Stiffness
B : Flexibility
C : Influence Coefficient
D : Unit Strain
Q.no 15. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 141/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Static Indeterminacy
B : Stiffness
C : Flexibility
D : Kinematic Indeterminacy
A : Force method
B : Displacement Method
C : Force-displacement method
D : Stiffness Method
A : Null Matrix
B : Unit Martrix
A : positive or negative
B : Not predicated
C : negative
D : positive
Q.no 20. Continuous Beam with two spans having one external support fixed and second external
support hinged. What is the degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 21. Ratio of stiffness of member to the total stiffness of the joint is known as
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 142/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Stiffness Factor
C : Distribution Factor
Q.no 23. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
A : Rectangular matrix
B : Null matrix
A:3
B:4
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 143/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:2
D:1
Q.no 26. The carryover factor in a prismatic member whose far end is simply supported
A:0
B : 0.5
C : 0.75
D:1
Q.no 27. Which of the following methods of structural analysis is not 'Displacement Method'
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Support Reactions
B : Displacements
C : SFD
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 144/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : BMD
Q.no 31. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 32. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 33. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
A:3
B:2
C:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 145/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:1
Q.no 34. A beam AB having point load of 80 kN at a distance of 1 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 30
B : 35.55
C : 3.55
D : 0.355
Q.no 35. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
A:3
B:2
C:1
D:4
Q.no 36. The kinematic indeterminacy of a single bay non sway portal frame , fixed at base is
A:0
B:1
C:2
D:3
Q.no 37. In a two span Continous Beam ABC, with one external support 'A' fixed and other
external support 'C' is hinged. Then how many number of Joint Equilibrium equations can be
formed ?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 146/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:0
D:1
Q.no 38.
A:
B:
C:
D:
Q.no 39. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'A' will be
A : 100
B : 50
C : 75
D : 25
Q.no 41. For the beam shown in figure, the stiffness of member CB is equal to _________
A:
B:
C:
D:
Q.no 42. A single bay non sway portal frame is fixed at base. A horizontal point load of 100kN is
acting on the vertical member 'AB' of protal frame, at the center. If the heigh of vertical member
is 4m, the Fixed End Moment at end 'B' will be
A : 100
B : 50
C : 75
D : 25
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 148/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 43.
A:
B:
C:
D:
Q.no 44. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BC member
A : 0.125 I
B : 0.151 I
C : 0.5 I
D : 0.2 I
Q.no 45. In a three span Continous Beam ABCD, with both external supports 'A' & 'D' are fixed.
Then how many number of Joint Equilibrium equations can be formed ?
A:3
B:2
C:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 149/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:1
Q.no 46. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CD member
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 47. For a beam whose near end is simply supported and far end is also simply supported,
the stiffness is equal to ________
A:
B:
C:
D:
Q.no 48. A beam AB having point load of 100 kN at a distance of 4 m from support A and 2 m
from support B. Find Fixed end moment at suppoprt A KN.m
A : 64.44
B : 54.44
C : 44.44
D : 34.44
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 150/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 49.
A:
B:
C:
D:
Q.no 51. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 151/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D : 13.33
Q.no 52. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
C:
D:
Q.no 53.
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 152/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 54.
A : 0 and 91.53
B : 1 and 91.53
Q.no 55. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
D : L per EI
Q.no 56. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 153/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 57.
A : 0 and 91.53
B : 1 and 91.53
Q.no 58.
A:
B:
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 154/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 59.
A:
B:
C:
D:
Q.no 60. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
C:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 155/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
D:
Q.no 1. Continuous Beam with two spans having both external supports hinged. What is the
degree of kinematic indeterminancy?
A:3
B:2
C:0
D:1
Q.no 2. The carryover factor in a prismatic member whose far end is roller support
A:0
B : 0.5
C : 0.75
D:1
A:3
B:2
C:0
D:1
A : Displacements
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 156/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Forces
D : Unit force
B : Macauly's Method
D : Kennedy’s theory
A : External indeterminacy
B : Kinematic indeterminacy
C : Internal indeterminacy
D : Static indeterminacy
C : Number of joints
D : Number of Reactions
Q.no 9. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Both the
external supports A & D are fixed supports. The degree of kinematic indeterminancy of this
beam is
A:0
B:1
C:2
D:3
Q.no 10. In a Continuous Beam, support A is hinged support, deflection at support 'A' is
A : Maximum
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 157/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Minimum
C : Zero
D : Can't say
A : Force Method
B : Displacement Method
D : Moment Method
D : Unknown Forces
Q.no 13. Ratio of moment developed at one end of the member to the moment transfered at the
other end of the same member is known as
B : Stiffness Factor
C : Distribution Factor
Q.no 14. A three span continous beam ABCD loaded with udl of 100kN/m on each span. Support
A is fixed support and support D is hinged support. The degree of kinematic indeterminancy of
this beam is
A:0
B:1
C:2
D:3
Q.no 15. If n x n square Flexibility matrix, then ‘n’ value represent ________________
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 158/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Number of joints
D : Number of member
Q.no 16. Maximum slope in simply supported beam with a central point load 'W' kN will be
A : at both support
B : at centre
C : at one end
D : at quarter span
Q.no 17. If the joint equilibrium equations are inadequate for unknown joint displacement , then
which equation is developed ?
A : Flexural equation
B : Torsional equation
D : Compatibility equation
Q.no 18. The ratio of moment of interia to the length of the beam called as
B : Stiffness Factor
C : Distribution Factor
A : Stiffness
B : Flexibility
C : Rigidity
D : Stress
Q.no 20. In a Continuous Beam, support A is fixed support, slope & deflection at support 'A' is
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 159/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A : Zero
B : Maximum
C : Minimum
D : Can't say
A : Stiffness
B : Flexibility
C : Bending Moment
D : Shear Force
A : Support Reactions
B : Displacements
C : SFD
D : BMD
Q.no 24. The carryover factor in a prismatic member whose far end is over hanging
A:0
B : 0.5
C : 0.75
D:1
Q.no 25. The carryover factor in a prismatic member whose far end is simply supported
A:0
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 160/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : 0.5
C : 0.75
D:1
Q.no 26. The carryover factor in a prismatic member whose far end is fixed
A:0
B : 0.5
C : 0.75
D:1
A : Null Matrix
B : Unit Martrix
A : positive or negative
B : Not predicated
C : negative
D : positive
Q.no 29. Finding the displacement of the released structure in the direction of redundant by
applying a unit load in the direction of redundant is called as____
A : Flexibility coefficient
B : Stiffness oefficient
C : Unit load
D : Unit force
Q.no 30. Ratio of stiffness of member to the total stiffness of the joint is known as
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 161/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B : Stiffness Factor
C : Distribution Factor
Q.no 31. If joint C having CB and CD member with stiffness factors are 0.16 I and 0.25 I , then
find out distribution factor for CB member
A:1
B : 0.2
C : 0.6
D : 0.4
Q.no 32. In cause effect relationship if action is moment, the effect will be _______________
A : Translation
B : Shear stress
C : Rotation
Q.no 33. A beam having concentric point load of 80 kN over a span of 4 m. Find Fixed end
moment in KN.m
A : 30
B : 50
C : 20
D : 40
Q.no 34. In a Continuous Beam, first span AB of 4m is loaded with central point of 100kN. The
Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 35. For the beam shown in figure, if support ‘A’ moves in upward direction through unit
displacement, the reaction developed at the support 'A' will be equal to _____
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 162/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 36. A propped beam AB carrying a UDL of 10KN per m with 3 m span. Calculate No. of
redundant
A:0
B:1
C:2
D:3
Q.no 37. For a beam whose near end is simply supported and far end is fixed, the moment
developed at near end due to unit positive rotation at the same end is
A:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 163/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:
C:
D:
Q.no 38.
A:
B:
C:
D:
Q.no 39. The kinematic indeterminacy of a single bay sway portal frame , fixed at base is
A:0
B:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 164/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:2
D:3
Q.no 40. If joint B having BA and BC member with both end simply supported and having span
6 m and 5m respectively, Find stiffness factor for BA member
A : 0.125 I
B : 0.1 I
C : 0.5 I
D : 0.2 I
Q.no 41. If joint B having BA and BC members with stiffness factors are '(0.67)*I' and '(0.67)*I'
then find out distribution factor for BA member
A : 0.5
B:1
C:0
D : 1.2
Q.no 42.
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 165/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
Q.no 43. Three prismatic membres AB,BC & BD meet at a joint for rigid frame to be analysed
using moment distribution method. The distribution factor for member AB & BC are 0.5 & 0.3
respectively. The distribution factor for member BD shall be
A : 0.2
B : 1.67
C : 0.6
D : 0.15
Q.no 44. In a Continuous Beam, first span AB of 4m is loaded with central moment of 100kN-m.
The Fixed End Moment at A will be
A : 100
B : 50
C : 75
D : 25
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 166/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
Q.no 45. If the Frame shown in figure is to be solved by Flexibility Matrix method, Calculate
number of Redundants
A:0
B:1
C:2
D:3
Q.no 46.
A:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 167/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:
C:
D:
Q.no 47. A Continuous Beam of 2 span ABC, external support 'A is fixed and external support
'C' is hinged. If the support 'B' is sinking by 1mm, then what is the kinamatic indeterminancy of
the beam.
A:3
B:2
C:0
D:1
Q.no 49. If the continouos beam given in figure is to be solved by Flexibility matrix method,
Calculate number of Redundants
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 168/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:3
B:2
C:1
D:4
Q.no 50. In a Continuous Beam, first span AB of 3m is loaded with udl of 100kN/m. The Fixed
End Moment at A will be
A : 100
B : 50
C : 75
D : 25
Q.no 51. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'C' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 52.
Q.no 53. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at A will be
A:
B:
C:
D:
Q.no 54. A single bay Portal Frame ABCD, carries a central point load on vertical member AB
and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal Frame is
4m, the Fixed End Moment at joint 'D' is
A:0
B : 3.33
C : 10
D : 13.33
Q.no 55.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 170/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
A:
B:
C:
D:
Q.no 56.
Q.no 57.
A:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 171/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
B:
C:
D:
Q.no 58. A single bay Portal Frame ABCD, carries a central point load of 10 kN on vertical
member AB and a udl of 10kN/m on horizontal member BC. If the span of all members of Portal
Frame is 4m, the Fixed End Moment at joint 'B' is
A:0
B : 8.33
C : 10
D : 13.33
Q.no 59. A moment 'K' requied to rotate near end of a prismatic beam through a unit angle
without translation, the far end being freely supported is given by
A : 3EL per L
B : 4EI per L
C : EI per L
D : L per EI
Q.no 60. In a Continuous Beam, first span AB of 'L' m is loaded with a external moment of 'M'
kN-m at a distance of 'a' from support 'A' . The distance beteen the external moment and
support 'B' can be considered as 'b'. The Fixed End Moment at B will be
A:
B:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 172/173
23/12/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10
C:
D:
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=2254&code=1052000&showTest=320&actForm=edit&set=10 173/173