Professional Documents
Culture Documents
Aim
Requirements
Apparatus required Quantity
7408 (AND) IC 1
5V Power Supply 1
Windows 10 PC 1
Problem statement:
An AND gate gives an output of logic 1 when input A AND input B are at logic 1, i.e., when the alarm
switch is ON and the LDR sensor detects a light (flashlight that burglar uses), only then the Alarm will
ring, otherwise, it will not ring in any of the other cases.
In order to design the burglar alarm, the alarm switch which is a SPST (toggle) switch and the
person detection is achieved by the light falling on the sensor ( because of the light source
used by the burglar) made from LDR, is used The schematic of the circuit is shown as below.
Learning Result
The integrated circuits and their connections on the breadboard were studied and
implemented. The practical applications of logic gate (ANDT) were studied and implemented