Professional Documents
Culture Documents
Seatwork 1
Seatwork 1
SEATWORK #1
Directions:
2. After solving, capture images of your solution using camscanner app or similar
app.
3. Compile the solution images into a single PDF file using a file name format as
illustrated below:
4. Within the time control given (TBA), send or share it to the gmail ad below:
engrnolicorpuz@gmail.com
COURSE/YEAR/SECTION:_____________________________ SCORE:
SEATWORK #1
01. Each of the members of the truss loaded as shown is an L 50 x 40 x 5 of A36 steel. For member BC,
calculate the following:
a. Stress in the member
b. Strain in the member
02. The chord members of the truss shown are made up of L 3 x 2 x 1/4 (AISC Designation) of A36 steel. If
the strain in member CD is to be controlled at a maximum value of 7.4 x 10-4, what should be the
maximum value of the top panel load P to be applied as shown?