Professional Documents
Culture Documents
Plunger Maximum 100 RPM 150 RPM 200 RPM 310 RPM* 350 RPM 400 RPM
Model Liters Per
Diameter Pressure
(metric) Revolution LPM M /hr
3
LPM M /hr
3
LPM M /hr
3
LPM M /hr
3
LPM M /hr
3
LPM M3/hr
(in.) BAR
1.500 0.7239 345 72.4 4.3 108.6 6.5 144.8 8.7 224.4 13.5 253.4 15.2 289.6 17.4
1.625 0.8495 345 85.0 5.1 127.4 7.6 169.9 10.2 263.3 15.8 297.3 17.8 339.8 20.4
W300H 1.750 0.9853 307 98.5 5.9 147.8 8.9 197.1 11.8 305.4 18.3 344.9 20.7 394.1 23.6
1.875 1.1310 268 113.1 6.8 169.7 10.2 226.2 13.6 350.6 21.0 395.9 23.8 452.4 27.1
2.000 1.2869 235 128.7 7.7 193.0 11.6 257.4 15.4 398.9 23.9 450.4 27.0 514.8 30.9
2.000 1.2869 207 128.7 7.7 193.0 11.6 257.4 15.4 398.9 23.9 450.4 27.0 514.8 30.9
2.125 1.4527 207 145.3 8.7 217.9 13.1 290.5 17.4 450.3 27.0 508.4 30.5 581.1 34.9
2.250 1.6287 185 162.9 9.8 244.3 14.7 325.7 19.5 504.9 30.3 570.0 34.2 651.5 39.1
W300M
2.375 1.8147 167 181.5 10.9 272.2 16.3 362.9 21.8 562.6 33.8 635.1 38.1 725.9 43.6
2.500 2.0108 150 201.1 12.1 301.6 18.1 402.2 24.1 623.3 37.4 703.8 42.2 804.3 48.3
2.750 2.4330 124 243.3 14.6 365.0 21.9 486.6 29.2 754.2 45.3 851.6 51.1 973.2 58.4
2.750 2.4330 114 243.3 14.6 365.0 21.9 486.6 29.2 754.2 45.3 851.6 51.1 973.2 58.4
3.000 2.8955 104 289.6 17.4 434.3 26.1 579.1 34.7 897.6 53.9 1013.4 60.8 1153.2 69.5
3.250 3.3982 89 339.8 20.4 509.7 30.6 679.6 40.8 1053.4 63.2 1189.4 71.4 1359.3 81.6
W300L
3.500 3.9411 77 394.1 23.6 591.2 35.5 788.2 47.3 1221.7 73.3 1379.4 82.8 1576.4 94.6
3.750 4.5243 67 452.4 27.1 678.6 40.7 904.9 54.3 1402.5 84.2 1583.5 95.0 1809.7 108.6
4.000 5.1476 59 514.8 30.9 772.1 46.3 1029.5 61.8 1595.8 95.7 1801.7 108.1 2059.0 123.5
*API Speed
General Notes
1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities 3. For operation below 200 RPM, an auxiliary lubrication system is required.
are lower, based on discharge pressure and fluid compressibility. 4. Standard plunger sizes are shown, however other sizes are available upon request.
2. API-674 and NACE-compliant designs are available; consult Weatherford for details 5. Spherical valves must be installed when using 4.00 in. plungers.
and exceptions to these standards.