You are on page 1of 2
‘3722, 1.15PM. “Test 1: Atapt review Home / My courses / w2021ec2023da / TEST 1(20 MARKS) / Test 1 Started on Friday, 28 January 2022, 205 PM State Finished Completed on Friday, 28 January 2022, 320 PM Time taken 1 hour 14 mins Grade 0.00 out of 20.00 (0%) uesion 1 Not anewered Marked out af 509 Writea program to generate a square pulse of frequency 72Hz on pin P7.0 using Timer 0 and Mode 2. ‘aueston 2 Not anewared Marked outot 5.00 Write a program for generating 2mS delay using 8051 timer using Timer 0 operating in MODE 1. hipsiecuserver nite ac ivmodiguzievewiphgatept=40297Eemid=98406 3722, 1.15PM. ‘Test 1: Ataptrevow uesion 3 Not answered Marked outof 00 Write program for the 8051 te transfer "SCHOOL" serially at 9600 baud, 8- and in mode 2 it data, 1 stop bit do this continuously using timer 1 uesicn & Not anewared Marked out of 5.00 Write a program for the 8051 microcontroller to toggle all the bits of PO, P1, and P2 every % ofa second. Assume a crystal frequency of 12MHZ. = Quiz Jump te, Test 1 Answer Sheets Submission = hipsiecuserver nite ac ivmodiguzievewiphgatept=40297Eemid=98406

You might also like