Professional Documents
Culture Documents
NB: the APP works with ammunition that have a Mathematical Coefficient G1
BASIC SETTINGS
At the first start you will be asked which metric system to use.
If we have not activated geolocation on the smartphone, once the program is started, a screen
will open asking for the GPS to be unlocked. We will then have the altitude data once the
program is started.
By clicking on SET1
we would have access to
ammunition
preset, of course
all editable from
settings screen
base.
We select the SET that we
want to edit e
let's go back to the screen
basic settings.
The Increment can also be 0.5 meters. , very useful in Field Target for shorter distances.
2
OPTICS
Set the data relating to the height of your telescope, and the
value of the clicks ( 1 / 4MoA, 1 / 8MoA, 1/10 MRAD, 1/20
MRAD and manual).
With "OK" confirm and return to the Basic
Settings screen.
GRAPHIC
With this key we have access to the fall chart, with the
possibility of setting the display of the kill zone, the size of
the kill zone and display the values in cm on the graph ( these
data can be modified using the key with
3
TABLE
On the side are reported all the data that can be inserted
in the table. To enter data, slide the cursor towards ON
Absolute novelty:
possibility of having in a single table also the
preset site angles with a deviation of 5 °, starting
from an angle of 10 ° up to
35 °.
( Very useful in the Field Target area)
4
ADVANCED FUNCTIONS
By inserting the initial speed, final speed and the distance between the
two detections, the ballistic coefficient of the bullet is calculated. It is
advisable to calculate it manually to have more precise calculations.
5
Clicks value calculator
• Secure the weapon well and aim at the center of the cross, make
the first shot and the second for confirmation in the usual hole.
By clicking on the “use it” button the MoA / Click value will be inserted
automatically in the optics setting.
6
SETTINGS
Version 1.1