Reference: Shell Driller's Notebook 4th Edition, Section E
wipertrip.com MUD PROPERTIES Turbulent Flow Flow Rate (gpm) 300 Slip Velocity Spherical Chip (ft/min) Mud Density (ppg) 11.00 Slip Velocity Flat Chip (ft/min) Mud Density (psi/ft) 0.57 PV (cp) 15 Laminar Flow YP (lbs/ 100 ft^2) 10 Slip Velocity Spherical Chip (ft/min) Slip Velocity Flat Chip (ft/min) CUTTINGS PROPERTIES Chip Diameter (in) 0.5 SLIP VELOCITY Chip Density (ppg) 24 Slip Velocity Spherical Chip (ft/min) Chip Density (psi/ft) 1.25 Slip Velocity/Ann Velocity Slip Velocity Flat Chip (ft/min) Slip Velocity/Ann Velocity ANNULAR SECTION DATA SECTION 1 Notes: OD Drill String (in) 6 1. This is an empirical model for a vertical well. Results should be ID Hole / Casing (in) 8 adjusted and compared with field experience Annular Velocity (ft/min) #VALUE! 2. The Slip Velocity should be less than Half the Annular velocity Critical Velocity Ann (ft/min) #VALUE! i.e. the ratio : Slip Velocity / Ann Velocity should be less than 0.5 Flow Type #VALUE! 3. Pipe Rotation will allow the fluid to be in TURBULENT Flow Effective Viscosity #VALUE!