Professional Documents
Culture Documents
Tổng Hợp Tài Liệu Sản Xuất Găng Tay Nitril
Tổng Hợp Tài Liệu Sản Xuất Găng Tay Nitril
Tổng Hợp Tài Liệu Sản Xuất Găng Tay Nitril
A Nguyên liệu
Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the
1
selection of conditions and test methods for overall migration
Materials and articles in contact with foodstuffs - Plastics - Part 2: Test method
2
for overall migration into olive oil by total immersion
Standard Test Methods for Polyurethane Raw Materials: Determination of the
3
Isocyanate Content of Aromatic Isocyanates
Plastics/rubber – Polymer dispersions and rubber latices(natural and synthetic)
4
Determination of surface tension by the ring method
Plastic - resins in the liquid state or as elmusions or dispersions - Dertermination
5
of aparent viscosity by the Brookfile Test method
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions -
6
Determination of viscosity using a rotational viscometer with defined shear rate
7 Rubber - Nitrile latex - Determination of residual acrylonitrile content
8 Rubber - Nitrile latex - Determination of beund acrylonitrile content
9 Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity
Biological evaluation of medical devices — Part 10: Tests for irritation and skin
10
sensitization
11 Rubber latex-Determination of apparent viscosity by the Brookfield method
12 Latex, rubber - Determination of total solids content
Standard Test Methods for Surface and Interfacial Tension of Solutions of,
#REF!
SurfaceActive Agents
Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the
#REF!
selection of conditions and test methods for overall migration
Materials and articles in contact with foodstuffs - Plastics - Part 2: Test method
#REF!
for overall migration into olive oil by total immersion
Materials and articles in contact with foodstuffs — Plastics substances subject to
limitation — Part 1: Guide to test methods for the specific migration of
#REF! substances from plastics to foods and food simulants and the determination of
substances in plastics and the selection of conditions of exposure to food
simulants
Materials and articles in contact with foodstuffs - Plastics substances subject to
#REF!
limitation - Part 2: Determination of terephthalic acid in food simulants
Materials and articles in contact with foodstuffs — Polymeric coatings on paper
#REF! and board — Guide to the selection of conditions and test methods for overall
migration
#REF! Rubber and plastic-Polymer dispersion and rubber latices-Determination of pH
#REF! Natural rubber latex concentrate-Determination of mechanical stability
B Thành phẩm
Medical gloves for single use-Part 2: Requirements and testing for
22
physical properties
Medical gloves for single use-Part 4: Requirements and testing for shelf life
23
determination
Medical gloves for single use - Part 1: Requirements and testing for freedom from
24
holes
Medical gloves for single use - Part 3: Requirements and testing for biological
25
evaluation
26 Standard Specification for Nitrile Examination Gloves for Medical Application
Protective gloves against dangerous chemicals and micro-organisms-Part 4:
27
Determination of resistance to degradation by chemicals
Protective gloves against dangerous chemicals and micro-organisms-Part 1:
28
Terminology and Performance requierments
Protective gloves against dangerous chemicals and micro-organisms-Part 5:
29 Terminology and performance requirements for micro-organisms risks (ISO 374-
5:2016)
Protective gloves against dangerous chemicals and micro-organisms-Part 2:
30
Determination of resistance to penetration
31 Standard Specification for Rubber Examination Gloves
32 Standard Specification for Rubber Surgical Gloves
33 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
34 Standard Test Method for Residual Powder on Medical Gloves
Standard Specification for Polychloroprene Examination Gloves for Medical
35
Application
Standard Test Method for Detection of Holes in Polyethylene Food Service
36
Gloves
EN 1186-1 2002
EN 1186-2 2002
EN 13130-1 2004
EN 13130-2 2004
DD CEN/TS
2002
14234
EN 455-2 2015
EN 455-4 2009
EN 455-1 2019
EN 455-3 2015
EN 420 2003