Professional Documents
Culture Documents
AE341A Quiz 2A
Q.1
For a fixed flow coefficient, a higher reaction leads to increased stage loading.
false
true
Q.2
When is the absolute flow angle at the rotor inlet equal to the relative blade angle at the rotor
exit? (R=Degree of Reaction)
R=0
R=-1
R=1
R=0.5
Q.3
There is diffusion in both rotor and stator in an axial compressor.
[Imp. Note: If you wish to skip the question, you should do so immediately. Once an option is chosen (either true or false),
you can not skip the question at a later stage.]
false
true
Q.4
Flow turning in turbine is ___ compared to that in the compressor.
Same
Cannot say
https://hello.iitk.ac.in/ae341a22/#/quiz/158 1/5
01/04/2022, 11:08 AE341A: Airbreathing Propulsion
Cannot say
AE341A: Airbreathing Propulsion
Larger
Users Online : 61 00:08:21
Smaller
Q.5
The change in the relative velocity in a centrifugal compressor is negligible.
false
true
Q.6
If the static enthalpy rise in the rotor exceeds that in the stator, then
α1 = β2
Cannot say
α1 < β2
α1 > β2
Q.7
Which of the following losses occur due to turning of wall boundary layer through an angle due to
curved surface?
Profile loss
Tip clearance loss
Secondary flow loss
Mixing loss
Q.8
For a compressor, the isentropic efficiency increases with the pressure ratio.
false
true
https://hello.iitk.ac.in/ae341a22/#/quiz/158 2/5
01/04/2022, 11:08 AE341A: Airbreathing Propulsion
false
true
Q.10
A larger stage loading requires more flow turning.
[Imp. Note: If you wish to skip the question, you should do so immediately. Once an option is chosen (either true or false),
you can not skip the question at a later stage.]
false
true
Q.11
Centrifugal compressor provides a higher pressure ratio across a stage compared to an axial
compressor.
false
true
Q.12
Radial equilibrium suggests a balance between -
Pressure force and centrifugal force
Centrifugal force and viscous force
Pressure force and viscous force
Pressure force and gravity force
Q.13
In an axial flow compressor, the swirl velocity distributions before and after rotor are given as:
c θ1 = ar − b/r
https://hello.iitk.ac.in/ae341a22/#/quiz/158 3/5
01/04/2022, 11:08 AE341A: Airbreathing Propulsion
Users
The degree Online
of reaction : 61
from hub to tip will- 00:08:21
Max. score: 1; Neg. score: 0.25
Increase
Cannot say
Remain constant
Decrease
Q.14
In an axial flow compressor, the absolute velocity in the rotor
increases
remains constant
initially increases then decreases
decreases
Q.15
Losses occurring due to boundary layer formed over compressor blades is -
Profile loss
Tip clearance loss
Secondary flow loss
Annulus loss
Q.16
For a fixed stage loading ψ , if the flow coefficient ϕ increases, the flow turning will
Increase
Cannot say
Remain constant
Decrease
Separation of flow on the suction side of the blade
Separation of flow on the pressure side of the blade
Delay in critical Mach no.
Q.18
An axial compressor is typically used in jet engines as the pressure ratio obtained per stage is
larger compared to a centrifugal compressor.
false
true
Q.19
In a rotor, the absolute (c), relative (w) and blade (u) speeds are related as-
u⃗ = w⃗ − c ⃗
u⃗ = c /
⃗ w⃗
u⃗ = c ⃗ − w⃗
u⃗ = w⃗ + c ⃗
Q.20
Polytropic efficiency of a turbine changes if the pressure ratio is increased.
false
true
SAVE
SUBMIT
https://hello.iitk.ac.in/ae341a22/#/quiz/158 5/5