Professional Documents
Culture Documents
SERVICE MANUAL
MODEL : LT-40FLP
CAUTION !!
BEFORE SERVICING THE TFT-LCD TV,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CAUTION!!
Before servicing receivers covered by this service manual, read and follow the SAFETY
PRECAUTIONS on page 2 of this publication.
At IC Connections
To repair a defective copper pattern at IC connections use the following procedure to install a
jumper wire on the copper pattern side of the circuit board.(Use this technique only on IC
connections.)
1.Carefully remove the damaged copper pattern with a sharp knife.(Remove only as much
copper as absolutely necessary.)
2.Carefully scratch away the solder resist and acrylic coating(if used) from the end of the
remaining coopper pattern.
3.Bend a small “U” in one end of a small guage jumper wire and carefully crimp it around the IC
pin.
4.Route the jumper wire along the path of the out-away copper pattern and let it overlap the
previously scraped end of the good copper pattern. Solder the overlapped area and clip off any
excess jumper wire.
Contents ------------------------------------------------------------------------- 4
Specifications ----------------------------------------------------------------- 5
1.Scope.
This document is the specification of 40” TFT-LCD Color TV.
2.Power
1) Power requirement
275W
2) AC / DC SMPS Adapter.
Input Frequency : 50/60㎐
Input Voltage: AC 100V ~ AC 240V (±10%)
Output Voltage: DC 5V,12V, 30V,
3) Power cord
Use UL listed and CSA certified detachable power cord type; SVT, 3-conductors, 18AWG
For AC 120V area. Use VDE listed detachable power cord type; HO5VV-F, 3-conductors,
18AWG for AC 220~240V area.
3.Tuning system
FVS 100 Program
4.Sound output
10W+10Wrms Stereo (Max)
7.External in/output
DVI-INPUT,S-VIDEO INPUT,HEADPHONE OUTPUT,ANALOG PC INPUT,PC AUDIO INPUT,
SCART 2 INPUT ,SUB WOOFER OUTPUT,ANTENNA INPUT
8. Function
CATV/Hyper band
Auto Program
Manual Program
Auto Sleep
Quick view
ACMS(Auto channel Memory System)
PSM(Picture Status memory)
SSM(Sound Status memory)
PIP(PICTURE IN RICTURE)
ARC(ASPECT RATIO CONTROL)
NO 40FLP / /
Model System
1 PAL-B ○ / /
2 PAL-G ○ / /
3 PAL-I, I /I ○ / /
4 PAL-D ○ / /
5 PAL-K ○ / /
6 SECAM-B ○ / /
7 SECAM-G ○ / /
8 SECAM-D ○ / /
9 SECAM-K ○ / /
10 SECAM-K1 ○ / /
11 SECAM-I (6.0) ○ / /
12 NTSC-3.58 / 4.5 ○ / /
13 NTSC-3.58 / 5.5 ○ / /
14 NTSC-3.58 / 6.0 ○ / /
15 NTSC-3.58 / 6.5 ○ / /
16 NTSC-3.58 / 4.5(5.0) ○ / /
17 NTSC-4.43 / 5.5 ○ / /
18 NTSC-4.43 / 6.0 ○ / /
19 NTSC-4.43 / 6.5 ○ / /
20 PAL 5.5 / 60Hz ○ / /
21 PAL 6.0 / 60Hz ○ / /
22 PAL 6.5 / 60Hz ○ / /
23 SECAM 5.5 / 60Hz ○ / /
24 SECAM 6.0 / 60Hz ○ / /
25 SECAM 6.5 / 60Hz ○ / /
26 SECAM L / L' X / /
TOTAL SYSTEM 25 / /
Note!! :
ⓐ If the set is cold, there may be a small “flicker” when the set is switched on. This is
Normal, there is nothing wrong with the set.
ⓑ if possible, use the VESA 1024 x 768@60HZ video mode to obtain the best image
quality for your LCD monitor. If used under the other resolutions, some scaled or processed
pictures may appear on the screen.
ⓒ some dot defects may appear on the screen, like Red, Green or Blue spot.
However, this will have no impact or effect on the monitor performance.
SERVICE MANUAL PAGE:7
SPECIFICATIONS
13. TFT – LCD Panel Character
1) Feature
1.POWER:
Turns the TV on from standby or off to
standby mode.
2.MUTE:
Turns the sound on and off
3.NUMBER buttons:
Select channel numbers.
6. I / II:
Selects the language during dual
language broadcast. / Selects the
sound output.
7.MENU:
Displays a main menu.
8.TV / AV:
Selects input signal source.
/ Clears the menu from the screen.
9.SLEEP:
Sets the sleep timer.
10.TV / PC :
Selects TV or PC mode directly.
11.Information Display
Use to see information on the current
boardcast
12. TV
The future reserved
15.OK
Accepts your selection or displays the current mode.
17. Q.VIEW
Returns to the previously viewed Programme
Note: TELETEXT mode.
The Q.VIEW button is used for TELETEXT function.
18. LIST
Displays the program list menu.
19. PIP
Display a PIP (Picture In Picture) screen.
20. ARC
Selects a screen mode – 16:9, 14:9, ZOOM, 1:1 and
auto Wide.
21. INPUT
Selects the AV source of sub picture in PIP mode.
22. POSITION
Selects a position of PIP screen.
23. SWAP
Switches a main picture for sub picture in PIP mode.
24. MODE
Selects a PIP screen mode – 16:1,9:1,double window
and scan mode
25.▲PR▼
Selects a programme when RF signal is displayed in
PIP mode.
Controller of Panel
1.ON/OFF:
Switches TV set on or off.
2.MENU:
Display a menu.
-
3.+ PR ( Programme Up/Down):
Selects a programme or a menu item.
-
4.+ VOL ( Volume Up/Down):
Adjusts the volume.
Adjusts menu settings.
5.TV/AV:
Selects input signal source.
Clears the menu from the screen.
6:POWER INDICATOR:
Illuminates red when the TV is in-
power standby mode.
Illuminates green when the TV is-
switched power on mode.
Illuminates amber when the TV is-
switched power saving mode.
Remove 8 Screw
Remove 10 Screw
Remove 6 Connectors
Remove 6 Screw
Remove 6 Connectors
Remove 14 Screw
N0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
PART 402- PANV400W100 AYMALT34A01 410-
400-011T AYCOLT32A01A 404-004A 450-001D 610-005A 610-005B 501-016T 0 407-004F 407-004G 407-004L A 620-005A 407-004H 407-004J 401-003A 402-004Z 450-002C- 410-001K 410-002L 410-001R 410-002C
NAME 004X,Y 001Q
SPEAKE
DESCRIPTIO FRONT CONTROL BLOCK DECO SPEAKER R STICKER SHIELD SHIELD MAIN PCB AC/DC SHIELD SHIELD BACK CORD DECO SCREW SCREW SCREW SCREW SCREW
N DECO(T,B) IR PCB PANEL FIX BRKT
COVER PCB KNOB PLATE 20W, 8Ω 10W, 8Ω LOGO FRONT MOUNT(L,R ASS'Y ADAPTE REAR JACK COVER HOLDER PLATE BTB 4*12 TTB 3*8 PBTB 3*10 PB 4*8 PB 3*6
) R
MATERIAR PMMA PC+ABS - - ABS PVC - - NI SAMSUNG EGI EGI EGI - - EGI SPTH PC+ABS ABS PVC SZN SZN SZN SZN SZN
COLOR
MIRROR SILVER - - SILVER SILVER - - SILVER - - - - - - - - DARK GRAY DARK GRAY BLACK - - - - -
FISH
Q'TY (EA) EACH 1 1 1 1 1 1 2 2 1 1 4 1 EACH 1 1 1 1 1 1 1 1 50 7 3 14 21
TAPPIN TAPPIN
REMARK CONTROL REAR TAPPING MACHINE MACHINE
G G
SET ASS'Y
The TFT LCD TV described in the followings is based on a Multi TV system, digital
Control display, 40.0” diagonal. The TFT LCD TV is intended to be a finished product,
Basically a display device mounted inside an enclosure which will provide the safety
Requirements. With the exception of LCD Panel, the display device shall be composed
entirely of solid state components.
These components shall have a history of reliable service in identity applications
and shall be applied in the circuits.
1. SCALER SECTION.
2. MCU SECTION.
3. ADC SECTION.
4. VIDEO PROCESSOR SECTION.
5. FRAME RATE CONVETER SECTION.
6. AUDIO PROCESSOR SECTION.
NOTE: ROM is two types, To development early stage it used the EEPROM – AT29C020
The production used the OTP (EPROM – M27X201)
It follows in the ROM and the point which is changed
Device: MX88L285
Features: Advanced Image Scaling/ processing
Automatic Image Optimization
Frame buffer interface
Microprocessor interface
On-screen display
Color processing
8-bit display outputs
Main/Sub – input ports
1) Description
The highly flexible MX88L285 is the mixed-signal product from the display processors.
MX88L285 is a highly integrated display processor with advanced digital signal processing.
MX88L285 provides high design scalability by accepting input images from multiple
Sources and displaying them on any flat panel display.
For the conversion of VGA input signals to higher-resolution outputs, the MX88L285
uses a Smart-scaling TM -3 filter scaling algorithm that accepts programmable parameters
for horizontal and vertical scaling. The MX88L285 scaling engine allows text and graphics
images to be handled appropriately with different scaling algorithms.
Image centering is supported for applications where image manipulation is not needed.
The MX88L285 flexible SDRAM/SGRAM interface is designed to support VGA to
WXGA resolution panels to provide a cost-effective solution.
Fabricated in an advanced CMOS process, the MX88L285 is provided in a space-saving
–388-lead PBGA surface-mount plastic package.
2) Block Diagram.
Reference line
Device: SDA55XX
Features: Built-in teletext decoder.
8051 compatible.
Internal ROM type.
1) Description
2) Block Diagram.
[ Logic symbol ]
1) Description
Analog Interface
The AD9882 is a complete 8-bit, 100 MSPS monolithic analog interface optimized for
capturing RGB graphics signals from personal computers, workstations and DTV STB. Its
100MSPS encode rate capability and full power analog bandwidth of 300 MHz
supports resolutions up to WXGA (1280 × 768).
The AD9882 includes a 100 MHz triple ADC with internal1.25 V reference, a PLL, and
programmable gain, offset, and clamp control.
The AD9882 also offers full sync processing for composite sync and sync-on-green
applications. A clamp signal is generated internally or may be provided by the user
through the CLAMP input pin. This interface is fully programmable via a 2-wire serial
interface (I2C).
Fabricated in an advanced CMOS process, the AD9882 is provided in a space-saving
100-lead LQFP surface-mount plastic package.
4) Pin Functions
1) Description
50/60HZ derivatives are also avail-able. The device comprises digital multistandard color
decode for master and slave channel, a RGB interface with fast-blank capability (SCART),
scaling units including panorama, embedded DRAM for upcoversion high performance frame
based up conversion, High-performance frame based up conversion algorithms, picture
improvements, temporal noise reduction as well as A/D and D/A converter adaptive 4H comb
filter Y/C separator with adjustable vertical peaking
The either come form a CVBS, Y/C, RGB or YUV input or from a CCIR 656 compatible digital
input signal. For RGB and YUV, interlace and progressive signals up to XGA can be connected.
High resolution PC signals (SVGA, XGA etc.) may only be reproduced with limited picture
quality
Multi-standard color decoder PAL/NTSC/SECAM including all substandards.
Integrated high-quality A/D converters and associated clamp Multi-standard sync processing
Linear horizontal scaling as well as non-linear horizontal scaling
Peaking, contrast, brightness, color saturation and tint High-quality soft mixer controlled by Fast
Blank Control interface for external field memory I2C-Bus Interface
Fabricated in an advanced CMOS process, the VSP9417B is provided in a space-saving
QFP80 surface-mount plastic package.
1) Description
The FRC 94xxA comprises all mail functionalities of a high end frame rate converter in one
monolithic IC.
The FRC 94xxA is ideally suited to work in conjunction with different TV Deflection Processors
as DDP 3315/16C. Also operation with Deflection Processor from other sources is possible.
The device comprises digital input interfaces, embedded DRAM for frame rate conversion
algorithms, scaling units including panorama mode,picture improvement,temporal noise
reduction as well as digital and analog output interface
1) Description
The MSP 3410D is designed to perform demodulation of FM or AM-Mono TV sound.
Alternatively, two-carrier FM systems according to the German or Korean terrestrial specs or
the satellite specs can be processed with the MSP 3410D.
Digital demodulation and decoding of NICAM-coded TV stereo sound, is done only by the MSP
3410.
The MSP 3410D offers a powerful feature to calculate the carrier field strength which can be
used for automatic standard detection (terrestrial) and search algorithms (satellite). The IC may
be used in TV sets, as well as in satellite tuners and video recorders. It offers profitable
multistandard capability, including the following advantages.
Fabricated in an advanced CMOS process, the MSP3410D is provided in a space-saving
80-lead PQFP surface-mount plastic package.
2) Block Diagram.
Unit : mm
5 4 3 2 1
1 2
5
3 6
7
4
8
9 10
2-1. Factory outgoing setting & Initialize with default data (into the SVC mode).
Factory Initialize REMARK
PAGE ITEM outgoing with default Ex
setting data
AGC 15 15 Variable Data(0-31)
RD 127 127 PC Contrast Coefficient-RED(0-255)
GD 127 127 PC Contrast Coefficient-GREEN(0-255)
DATA 1
BD 127 127 PC Contrast Coefficient-BLUE(0-255)
RO 79 79 PC Brightness Coefficient-RED(0-63)
GO 79 79 PC Brightness Coefficient-GREEN(0-63)
BO 79 79 PC Brightness Coefficient-BLUE(0-63)
PC CP 5 5 PC Charge Pump(0-7)
50 PR * 1 * means current program NO.
DCI 0 0 Variable Data(0-1)
DATA0 255 255 Variable Data(0-255)
DATA1 255 255 Variable Data(0-255)
DATA2 255 255 Variable Data(0-255)
DATA 2 DATA3 255 255 Variable Data(0-255)
DATA4 255 255 Variable Data(0-255)
DATA5 255 255 Variable Data(0-255)
DATA6 255 255 Variable Data(0-255)
DATA7 255 255 Variable Data(0-255)
FP 52 52 FM Prescaler (0-127)
NP 122 122 NICAM Prescaler (0-127)
SP 63 63 Scart Prescaler (0-127)
DATA 3
S1 VOL 44 44 Scart1 Prescaler (0-127)
S2 VOL 44 44 Scart2 Prescaler (0-127)
50 PR * 1 * means current program NO.
0 100PR
200PR 0 0
1 200PR
0 Not apply to TEXT
TEXT 1 1
1 Apply to TEXT
0 TELETEXT TOP OFF
TOP 1 1
1 TELETEXT TOP ON
0 Apply to COMPONENT
SCART 1 1
1 Apply to SCART
0 Not apply to ACMS
DATA 4 ACMS 1 1
1 Apply to ACMS
0 Used except for CHINESS or AUSTRALIA
CH+AU 0 0
1 Used CHINESS or AUSTRALIA
0 BG/I/DK
1 BG/I/DK/L
SYS 1 1 2 BG/I/DK/M
3 RESERVED
50 PR * 1 * means current program NO.
121 Opt 1 Translate HEX into DEC(DATA3VALUE1)
Initialize
Factory
with
PAGE ITEM outgoing Ex REMARK
setting default
data
FVS 1 1 Frequency voltage Disable/Enable(0-1)
DVI 1 1 Fix (All Model application)
D-TV 0 0 D-TV Disable/Enable (0-1)
VCHIP 0 0 Violence Disable/Enable (0-1)
WOFER 1 1 Fix (All Model application)
0 SS-40 L01 Used SS-40 L01 PANEL
1 SS-40 L02 Used SS-40 L02 PANEL
2 SS-42 Used SS-42 PANEL
3 LG-46 Used LG-46 PANEL
4 RESERVED
5 RESERVED
6 RESERVED
PANEL 0 0 7 RESERVED
8 RESERVED
9 RESERVED
10 RESERVED
11 RESERVED
12 RESERVED
DATA 6
13 RESERVED
14 RESERVED
15 RESERVED
0 NEC-A Save NEC-A TV Channel
1 Marantz Save Marantz TV Channel
2 L-Model Save L-Model TV Channel
3 E-Model Save E-Model TV Channel
4 M-Model Save M-Model TV Channel
5 KOREA Save KOREA TV Channel
6 USA Save USA TV Channel
7 RESERVED
RESET 15 15
8 RESERVED
9 RESERVED
10 RESERVED
11 RESERVED
12 RESERVED
13 RESERVED
14 RESERVED
15 RESERVED
1. Supplied Accessories
Note: Make Sure the following accessories are provided with Product.
BOX FRONT
SET FRONT
SET FRONT
PACKING FRONT
SET FRONT
SET FRONT
1 ) TOP
2) BOTTOM
A1504S
C3875S C102S
Voltage Reg
Voltage Detector
Voltage Detector KIA78L05F
KIA7042AF
KIA7027AF
VOLTAGE
REGULATOR - 1A
VERTICAL
VN02AN
INPUT SELECTOR SWITCH FOR HIGH
DEFINITION DISPLAY
VOLTALGE REGULATOR
A78R08 (8V)
BA7657F
C1001,C401,C832,C8
2 0CASH101CMTS 100UF 16V CAPACITOR,CAN 7
33,C271,C272,C273
C605,C615,C616,C68
2 0CASH220CMTS 22UF 16V CAPACITOR,CAN 7
3,C684,C1037,C1038
C1002,C403,C803,C6
2 0CASH221AMTS 220UF 10V CAPACITOR,CAN 91,C693,C843,C848,C 9
842,C528
2 0CASH221EMTS 220UF 25V CAPACITOR,CAN C811 1
C1040,C1048,C161,C
2 0CASH2R2HMTS 2.2UF 50V CAPACITOR,CAN 4
28
2 0CASH330CMTS 33UF 16V CAPACITOR,CAN C7 1
2 0CASH334HMTS 0.33UF 50V CAPACITOR,CAN C1008 1
2 0CASH3R3HMTS 3.3UF 50V CAPACITOR,CAN C623 1
C385,C454,C455,C52
2 0CASH470CMTS 47UF 16V CAPACITOR,CAN 7
9,C530,C851,C906
C1007,C1061,C1081,
2 0CASH471AMTS 470UF 10V CAPACITOR,CAN 4
C1039
C1,C101,C1012,C101
4,C103,C104,C105,C1
06,C107,C108,C109,C
110,C111,C112,C113,
C114,C115,C116,C11
7,C118,C119,C12,C12
0,C121,C122,C123,C1
27,C128,C129,C130,C
131,C132,C134,C135,
2 0CHSS104DZTS 0.1UF,1608 CAPACITOR, CHIP C136,C137,C138,C13 70
9,C15,C16,C17,C171,
C172,C173,C174,C17
5,C176,C177,C178,C1
79,C18,C180,C181,C1
82,C183,C184,C185,C
186,C187,C188,C189,
C190,C191,C192,C19
3,C194,C2,C201,C202
,C203
,C204,C205,C206,C20
7,C208,C209,C210,C2
11,C215,C216,C220,C
221,C222,C227,C27,C
3,C351,C352,C354,C3
55,C356,C357,C358,C
359,C362,C365,C366,
C367,C369,C370,C37
2 0CHSS104DZTS 0.1UF,1608 CAPACITOR, CHIP 3,C374,C376,C380,C3 79
82,C383,C421,C422,C
424,C425,C426,C453,
C501,C502,C509,C51
0,C511,C512,C513,C5
14,C515,C516,C518,C
519,C520,C521,C522,
C523,C6,C692,C694C
903,C904,C905
C124,C125,C133,C14
2 0CHSS150DJTS 15PF,1608 CAPACITOR, CHIP 5
0,C141
R1009,R1010,R1025,R10
2 0RHSS102DJTS 1K OHM, 1608 J RESISTOR, CHIP 49,R1084,R53,R54,R56,R 11
55,R606,R607
R161,R453,R454,R455,R5
2 0RHSS103DJTS 10K OHM, 1608 J RESISTOR, CHIP 04,R603,R61,R909,R911, 10
R924
2 0RHSS104DJTS 100K OHM, 1608 J RESISTOR, CHIP R1001 1
2 0RHSS105DJTS 1M OHM, 1608 J RESISTOR, CHIP R102 1
2 0RHSS122DJTS 1.2K OHM, 1608 J RESISTOR, CHIP R1002 1
2 0RHSS152DJTS 1.5K OHM, 1608 J RESISTOR, CHIP R637,R639 2
R103,R104,R105,R211,R2
2 0RHSS220DJTS 22 OHM, 1608 J RESISTOR, CHIP 26,R501,R502,R503,R225 10
,R908
2 0RHSS221DJTS 220 OHM, 1608 J RESISTOR, CHIP R1086 1
2 0RHSS222DJTS 2.2K OHM, 1608 J RESISTOR, CHIP R801 1
R1011,R1048,R451,R452,
2 0RHSS223DJTS 22K OHM, 1608 J RESISTOR, CHIP 6
R1082,R802
2 0RHSS272DJTS 2.7K OHM, 1608 J RESISTOR, CHIP R352 1
2 0RHSS331DJTS 330 OHM, 1608 J RESISTOR, CHIP R1085 1
R2,R4,R6,R8,R10,R12,R1
2 0RHSS332DJTS 3.3K OHM, 1608 J RESISTOR, CHIP 12
4,R16,R18,R20,R21,R67
2 0RHSS333DJTS 33K OHM, 1608 J RESISTOR, CHIP R27 1
2 0RHSS392DJTS 3.9K OHM, 1608 J RESISTOR, CHIP R621,R622,R631 3
R110,R112,R114,R1201,R
1202,R1203,R356,R357,R
362,R363,R368,R505,R50
2 0RHSS470DJTS 47 OHM, 1608 J RESISTOR, CHIP 24
6,R904,R905,R131,R201,
R202,R601,R602,R919,R9
20,L1020,L1021
R101,R1161,R1081,R422,
2 0RHSS472DJTS 4.7K OHM, 1608 J RESISTOR, CHIP R57,R58,R59,R917,R918, 11
R931,R932
R1012,R1047,R60,R636,R
2 0RHSS473DJTS 47K OHM, 1608 J RESISTOR, CHIP 8
638,R1083,R1162,R925
2 0RHSS4R7DJTS 4.7 OHM, 1608 J RESISTOR, CHIP R691,R692 2
2 0RHSS510DJTS 51 OHM, 1608 J RESISTOR, CHIP R219,R220,R221 3
2 0RHSS511DJTS 510 OHM, 1608 J RESISTOR, CHIP R351 1
R1017,R1043,R921,R922,
2 0RHSS750DJTS 75 OHM, 1608 J RESISTOR, CHIP 5
R923
AL102,AL103,AL104,A
L108,AL109,AL110,AL
114,AL115,AL171,AL1
72,AL173,AL174,AL17
5,AL176,AL177,AL178
,AL179,AL180,AL181,
AL182,AL183,AL184,A
2 0RYSS330FJTS 33 OHM, 3216 RESISTOR, ARRAY CHIP 50
L185,AL186,AL187,AL
188,AL189,AL190,AL1
91,AL192,AL193,AL19
4,AL195,AL196,AL197
,AL198,AL201,AL202,
AL01,AL02,AL501,AL5
02,AL505
Q201,Q202,Q621,Q62
2 0TRKE1504STS KTA1504 TRANSISTOR, CHIP 6
2,Q623,Q203
Q451,Q452,Q1081,Q1
2 0TRKE3875STS KTC3875S TRANSISTOR, CHIP 003,Q1009,Q1152,Q3, 9
Q801,Q921
2 0XTKI06M00TS 6.0MHZ, 33PF CRYSTAL, CHIP X1 1
2 0XTKI143180S 14.318MHZ CRYSTAL, CHIP X101 1
2 0XTKI20M25TS 20.25MHZ, 22PF CRYSTAL, CHIP X201,X501 2
2 1DHSTS1545GS D2PAK, 45V 15A DIODE, RECTIFIER ZD801 1
D831,D832,D834,D83
2 1DHSTYW020TS SMBYW02-200 DIODE, CHIP 5
5,D501
ZD901,ZD902,ZD903,
ZD904,ZD905,ZD1005
2 1DZSC5231BTS 5.1V, MMSZ5231BS-7 DIODE, ZENER CHIP 9
,ZD1006,ZD906,ZD90
7,
2 1DZSC5237BTS 8.2V DIODE, ZENER CHIP ZD601 1
2 1ICAD98820BS AD9882A-100MHZ IC, A/D CONVERTER IC351 1
2 1ICIPAP5R0BD AP1501-5.0 IC, DC/DC CONVERTER IC401 1
2 1ICMI5550MBS Txt-pro,PQFP-100 IC, MICOM SDA555OM IC01 1
2 1ICMI9417BCS VSP9417B-C3 IC, VIDEO DECODER IC201 1
2 1ICMI9429AAS FRC9429A-A1(80P) IC, VIDEO DECODER IC501 1
2 1ICMX88L285S MX88L285-S IC, SCALER IC101 1
2 1ICNS90C383S DS90C383S,64MHZ,24 IC, LVDS TRANSMITTER IC402 1
2 1ICNSLM5R0BS 3A, LM2576HVSX-5.0V IC, REGULATOR IC801 1
2 1ICPH74F08TS N74F08, PHLIPS IC, AND GATE IC902 1
2 1ICRO6161FTS ROHM, BA6161F 30~40IC, REGULATOR IC1003 1
2 1ICSE24C16TS 24C16,16K IC, EEPROM IC02 1
2 1ICST24C02WS 24C02W IC, EEPROM IC931,IC901 2
2 1ICST4053BMS HCF4053BM1 IC, TRIPPLE IC1151 1
2 1ICSTLD18DTS LD1085D2M18R,D2PAKREGULATOR, IC IC504,IC271 2
2 1ICSTLD25DTS LD1085D2M25R,D2PAKIC, REGULATOR IC842 1
2 1ICSTLD25TTS LD1117S25TR Regulator(STM) IC12 1
2 1ICSTLD33DTS LD1085D2M33R,D2PAKIC, REGULATOR IC841 1
IC11,IC353,IC503,IC8
2 1ICSTLD33TTS LD1117S33TR Regulator(STM) 5
51,IC272
2 1ICWB986532S 512Kx32bitx4 SDRAM IC, SDRAM CHIP IC171,IC172 2
PANEL INVERTER
30PIN 14PIN
4PIN
L
2PIN
R
3PIN
MAIN
SPEAKER
SMPS
MAIN Board Board
14PIN
3 PIN
10 PIN SUB
5 PIN SPEAKER
CONTROL IR
Power Cord
11) IC101 PIN 328 R signal out 12)IC 101 pin 301 V-sync
15) IC 201 pin 38 TELETEXT R signal.input 16) IC 201 pin 37 TELETEXT FB signal input
17) IC201 pin 54 R signal output 18) IC 201 pin 51 clock output
23) IC201 pin 82 Component U - signal input 24) IC201 pin 55 S-Video C signal input
29) IC601 pin 67 SIF signal input 30) IC601 pin 56&57 AV1 sound input(video)
33) IC601 pin 28 L -sound output 34) IC601 pin 27 R- sound output
35) IC351 pin 99 R signal ouput 36) IC351 pin 10 G signal ouput
( XGA 1024*768@60HZ) ( XGA 1024*768@60HZ)
47) IC01 pin 11 SCL clock output 48) IC171 pin 2 data input.
51) IC402 pin 41 ARC output 52) P1002 Component Y signal input
53) P1002 Component U signal input 54) ) P1002 Component V signal input