Professional Documents
Culture Documents
Home / My courses /
UGRD-ENG6201-2123T /
WEEK 7 - FALLING, IMPACT, ACCELERATION AND LIFTING HAZARDS /
Midterm Quiz 1
Question 1
Correct
OSHA standard 29 CFR 1910.178 doesn't requires initial training, before an employee is allowed to operate a forklift, refresher training under
specified conditions, and an evaluation of forklift operation performance at least every three years
Select one:
True
False
Question 2
Correct
Protection from impact injuries from falling or projected objects includes personal protective equipment to protect the head (hard hats), eyes
and face (eyeglasses or shields), and feet (footwear).
Select one:
True
False
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 1/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 3
Correct
Select one:
a. ensure that hazardous products are not properly labelled;
c. educate and train workers on the hazards and safe use of hazardous products in the workplace;
d. ensure appropriate control measures are in place to protect the health and safety of workers.
Question 4
Correct
Select one:
a. Step and fall
Question 5
Correct
OSHA’s recommendations for effective fall protection include the following: have a plan, establish requirements, provide equipment and
procedures, ensure proper use and type of equipment, and provide training.
Select one:
True
False
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 2/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 6
Correct
Select one:
a. Trip and fall
Question 7
Correct
Select one:
a. Slip and fall
Question 8
Correct
The primary causes of falls are a foreign object on the walking surface; a design flaw in the walking surface, a slippery surface, and a person's
impaired physical condition.
Select one:
True
False
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 3/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 9
Correct
Select one:
a. choose the right material from the outset
b. standing still
Question 10
Correct
The coefficient of friction between surfaces is an effective method for comparing the traction of a walking surface. A coefficient of friction of
0.60 or less means the surface is very slippery and very hazardous. A coefficient of 0.40 or higher means there is good traction. Coefficients of
friction decrease when a surface is wet.
Select one:
True
False
Question 11
Correct
This should have the following components: poster illustrations, pre-employment screening, regular safety inspections, education and
training, external services, and a written map of the program.
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 4/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 12
Correct
Question 13
Correct
Dos and don'ts of ladder safety include checking for slipperiness, allowing only two person on the ladder at a time, securing the base and top
on a level surface, applying the four-to-one ratio, facing the ladder when climbing, avoiding leaning, and always holding on with one hand.
Select one:
True
False
Question 14
Correct
It should be the last line of defense protecting employees from hazards. Before using PPE, every feasible engineering and administrative
control should be employed.
Question 15
Correct
This program should have the following components: policy statement commitment; review and acceptance of walkways; reconditioning and
retrofitting; maintenance standards and procedures; inspection, audits, tests, and records; employee footwear; legal defenses; and
measurement of results.
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 5/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 16
Correct
OSHA regulations that apply specifically to fall protections in scaffolding work are as follows: 1926.451(g) (2), 1926.502(d)(15), and
1926.451(d)(16).
Select one:
True
False
Question 17
Correct
The most widely used materials in manufacturing gloves for hand protection are leather, cotton, aramids, polyethylene, stainless steel cord,
chain link, metal mesh, butyl rubber, and viton rubber.
Select one:
True
False
Question 18
Correct
Most falls fit into one of three categories: trip and fall, stump and fall, and step and fall.
Select one:
True
False
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 6/7
4/22/22, 1:08 AM Midterm Quiz 1: Attempt review
Question 19
Correct
Select one:
a. Stump and fall
Question 20
Correct
This can be minimized by using the following: anti-fatigue mats, shoe inserts, foot rails, improved workplace design, and sit/stand chairs.
Jump to...
trimestral.amaesonline.com/2123/mod/quiz/review.php?attempt=602019&cmid=3696 7/7