You are on page 1of 4

Skip to content

Manuals+

User Manuals Simplified.

Redmi AirDots Wireless Bluetooth Headset


User’s Manual
Home » Redmi » Redmi AirDots Wireless Bluetooth Headset User’s Manual

Redmi AirDots Wireless Bluetooth Headset User’s Manual


Contents [ hide
1 Wearing headphones
2 Charging
3 Starting Up
4 Shut Down
5 Use Dual Headphones
6 Use Single Earphone
7 Headset Reset
8 Related Manuals:

Wearing headphones

1. Gently insert the ear cap down into the ear canal. It is better that sway the head and the
headphones are not shaken.
2. Please pay attention to adjust the earphone to expose the microphone during the call.
3. When talking, put the headset microphone toward the mouth to make the call clearer.

The earphone itself is equipped with a medium eartip. If you feel unwell, it is recommended to replace
the large or small eartip.

Charging

Before using the device, please tear off the isolation film at the charging contacts of the left and right
headphones to fully charge the charging box and headphones.
Plug in the charging cable to charge both the headset and the charging box.
The charging box is not fully charged, while the charging indicator light is steady red. When the
battery is fully charged, the charging indicator is off.
During the charging of the headset, the red light of the earphone light is long. When the earphone
is fully charged, the white light of the earphone light is on for 1 minute and then goes out.

Starting Up

1. When the earphone is in the charging box, the earphone is automatically turned on from the
charging box.
2. When the headset is not in the charging box and is turned off, press and hold the multi-function
button for about 1 second (the white light is on).

Shut Down

1. Put it into the charging box and the headset will automatically shut down.
2. When the power is on, press and hold the multi-function button for about 5 seconds (the red light
is on for 2 seconds).

Use Dual Headphones

Automatically Connect:
Take two earphones out of the charging box at the same time, wait for 2-3 seconds to automatically
turn on the headphone, and turn on the device Bluetooth search “RedmiAirDots_R” when the right
headphone white light flashes and click to complete the connection. If the connection fails, put the
headset back in the charging case. Repeat the above operation. After the first connection, the headset
can be automatically connected back to the last paired device (Bluetooth function needs to be turned
on).
Note: The headset has been initialized at the factory and can be taken out for related operations
directly.

Manual Connection:
When the headset is turned off, manually open two headphones, the white light flashes quickly and
waits for the left and right headphones to be connected in series. After the serial connection is
successful, the right earphone white light flashes slowly, and the device Bluetooth is connected to
connect.

Use Single Earphone

Automatic connection: Take out a headset from the charging idea. When the indicator light flashes
from white light to slow network after auto power on, open the device Bluetooth search
“RedmiArDots_R” (or “RedniArDos_L”) and click to complete the connection.
After the first connection, the headset can be automatically connected back to the last paired device
(Bluetooth needs to be turned on).
Note: The left earphone (L) has a relatively long automatic connection time.

Manual connection: When the headset is turned off, manually turn on one of the machines. When
the headset turns white and flash slowly, turn on the Bluetooth function of the device to connect the
corresponding headset.

Headset Reset

If the headset cannot be connected properly, please reset the headset as follows: Take the headset
out of the charging box, and in the off state, press and hold the two earphone multi-function keys for
about 15 seconds, and alternately flash three times in the second red and white light. Then release
and put back the charging box, delete the connection record on the device and reconnect. (including
clearing the records where the two headphones are paired in series and paired with the device)
Redmi AirDots Wireless Bluetooth Headset User’s Manual – Optimized PDF
Redmi AirDots Wireless Bluetooth Headset User’s Manual – Original PDF

Related Manuals:

1. Xiaomi Redmi AirDots TWS Earbuds User Manual Xiaomi Redmi AirDots User Manual Guide Charging:
Remove product from...
2. Plantronics Voyager Legend Wireless Bluetooth Headset User Manual User Manual
Plantronics Voyager Legend Wireless Bluetooth Headset What’s in...
3. Plantronics Voyager 5200 Wireless Bluetooth Headset User Manual User Manual Plantronics
Voyager 5200 Wireless Bluetooth Headset What’s...
4. Aluratek Bluetooth Wireless Stereo Headset with Boom Mic User Manual User Manual
Aluratek Bluetooth Wireless Stereo Headset with Boom Mic...
5. G11-JL True Wireless Stereo Bluetooth Headset User Manual Main user interface A. Contact
Charging point B. Function Button...
6. Aluratek ABHS02F Bluetooth Wireless Stereo Headset with Boom Mic User Manual User
Manual Aluratek ABHS02F Bluetooth Wireless Stereo Headset with Boom...

You might also like