You are on page 1of 1

Job Safety Analysis

Confined Space

Sl. No Activity Hazard Control Measure

1. Gas monitoring to be done Continuous /periodical intervals.


2. O2 Level shall be-20.9 %.No LEL, H2S & CO.
3. Ensure adequate illumination
4. Provide proper ventilation / Exhaust fans.
5. Ensure proper housekeeping & avoid slippery
1. Oxygen deficiency/Enrichment
6. Planning of activity sequence and communicate in TBM
2. Improper Illumination
7. Skilled workers to be employed.
3. Presence of hydrocarbon & toxic gases
8. Safety signage to be provided.
4. Fire/Explosion inside
9. Area isolation
Confined 5. Fall of person/Material from height
01 10. TBT & Job specific training to be ensured prior to the job
space 6. Slips & Tripping hazards
11. Proper work methodology must be followed
7. Suffocation
12. Permit to work should be implemented
8. Burn
13. Ensure an attendant is available for monitoring the work inside
9. Cut/Hit Injury
from outside.
10. Engulfment.
14. Avoid walking on loose material inside the confined space

You might also like