Professional Documents
Culture Documents
Finish
Finished parts shall be washed in a multi-stage phosphate processing system and then
Choice Of Superior Hydroformed And Segmented Optics finished with a standard polyester urethane powder coat paint. The door frame assembly shall
always be anodized in a natural finish. Optional anodized finishes are available and shall use
an electrolytic process to oxidize and colorize the aluminum for a finish that is extremely
resistant to flaking, fading, and corrosive environments. Standard powder colors are dark
bronze, black, white, and natural aluminum. Standard anodized colors are bronze (light,
medium, & dark), black, and natural aluminum. Custom powder, anodized, and wet finishes
Hubbell Lighting, Inc. are available (contact factory for availability).
Executive SQUARE & REFRACTOR
ORDER EXAMPLE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
The Executive SQ and SQR families blend traditional square styling with sophisticated engineering. The EXEC SQ25 400MH 3S 277 C 28 N PRP - EXI AAL ABK
single piece extruded aluminum housing combines strength and durability with superior mechanical and
ORDERING SEQUENCE
electrical features. With the Executive’s unique “On The Door” mechanical system, everything is easy to install,
maintain, and will stand the test of time. The SQ and SQR families are available in two sizes (SQ19, SQ25 and HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
SQR19, SQR25) to accommodate any design application. The Executive family of products continues the (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
standard for performance and quality in today’s marketplace.
EXEC-SQ25 Arm Dimension: 2" x 4 " x 8" SQR19 100MH (ED17) 3H Type-III Hydro
1
208 10 32 HS House Side Shield
4
VF Vertical Slip Fitter BZ Dark Bronze
Tie-Rod Spacing: 3" (9/16" dia. holes)
• 400 watt max 150MH (ED17)* 5H Type-V Hydro
1
240 N Not Required HF Horizontal Slip Fitter WH White
Fixture EPA: 1.5 (10 - single)
• Full format ED37 lamp available Photocell Receptacle AL Natural Aluminum
SQ19
3.0 (28 - 2@180) (29 - 2@90) 175MH (ED28) 277 PRL
• Full cutoff segmented and 3.5 (39 - 3@90) (32 - 3@120) 28 39 Luminaire
2S Type-II Seg
1
250MH (ED28) 347
hydroform optics 5.0 (49 - 4@90)
3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
removable without tools 200PMH (pulse ED28) 4L Type-IV Long Seg
1
LBZ Light Bronze
29 49 QTZ 5 Quartz Restrike
4W Type-IV Wide Seg
1
MBZ Medium Bronze
FL Fuse Luminaire
70HPS (ED23.5) 5S Type-V Seg
1
DBZ Dark Bronze
EXI Extruded Arm Insert
6
SQR19
EXEC-SQR25 Fixture Dimension: 19" x 19" x 9.45" 150HPS (ED23.5) 2H Type-II Hydro
1
N Not Required AAL Natural Aluminum
• 400 watt max Arm Dimension: 2" x 4 " x 8" 250HPS (E18) 3H Type-III Hydro
1
NS Non-Standard Finish
Tie-Rod Spacing: 3" (9/16" dia. holes) (consult factory)
• Full format ED37 lamp available
• Cutoff optical refractor and Fixture EPA: 1.8 (10 - single)
3.6 (28 - 2@180) (29 - 2@90)
hydroform combo 5.7 (39 - 3@90) (32 - 3@120) *150MH requires M102 lamp.
• Everything is accessible or 7.5 (49 - 4@90)
removable without tools
ORDERING SEQUENCE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
SQ25
• Reduced jacketed ED28 lamp Fixture EPA: 277 PRL Photocell Receptacle
4.4 (28 - 2@180) (29 - 2@90) 28 39 Luminaire
• Full cutoff segmented and 200PMH (pulse ED28) 2S Type-II Seg
1
347
6.6 (39 - 3@90) (32 - 3@120)
hydroform optics 8.8 (49 - 4@90) 350PMH (pulse ED28) 3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
LBZ Light Bronze
4L Type-IV Long Seg
1
removable without tools 400PMH (pulse ED28)
QTZ Quartz Restrike
5
SQR25
• 250 watt max 400PMH (E18) 2H Type-II Hydro
1
N Not Required
• Reduced jacketed ED28 lamp
• Cutoff optical refractor and
SQR25 3H Type-III Hydro
1 NS Non-Standard Finish
(consult factory)
Fixture Dimension: 25" x 25" x 11.75"
hydroform combo Arm Dimension: 2" x 4 " x 8"
• Everything is accessible or Tie-Rod Spacing: 3" (9/16" dia. holes)
removable without tools Fixture EPA: 2.7 (10 - single)
5.4 (28 - 2@180) (29 - 2@90)
NOTES:
8.1 (39 - 3@90) (32 - 3@120)
1) All reflectors (minus the 5H & 5S) are field rotatable without tools. 4) The 'HS' houseside shield option is n/a with the '5H' or '5S' reflector.
10.8 (49 - 4@90) 2) '32' mounting (3@120) only available with round pole or modified pole top fitter. 5) The 'QTZ' quartz restrike option will have a 2-minute delay, and is only available in150W with DCBAYONET.
3) The 'SG' stone guard option is clear polycarbonate and attaches to the door via (2) extrusions. 6) If the color for the 'EXI' extruded arm insert is not specified, insert will be brushed aluminum.
'SG' N/A with 'SQR' product.
Note: Arms shown with optional ‘EXI’ insert
EXEC-SQ & SQR Written Specifications
Finish
Finished parts shall be washed in a multi-stage phosphate processing system and then
Choice Of Superior Hydroformed And Segmented Optics finished with a standard polyester urethane powder coat paint. The door frame assembly shall
always be anodized in a natural finish. Optional anodized finishes are available and shall use
an electrolytic process to oxidize and colorize the aluminum for a finish that is extremely
resistant to flaking, fading, and corrosive environments. Standard powder colors are dark
bronze, black, white, and natural aluminum. Standard anodized colors are bronze (light,
medium, & dark), black, and natural aluminum. Custom powder, anodized, and wet finishes
Hubbell Lighting, Inc. are available (contact factory for availability).
Executive SQUARE & REFRACTOR
ORDER EXAMPLE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
The Executive SQ and SQR families blend traditional square styling with sophisticated engineering. The EXEC SQ25 400MH 3S 277 C 28 N PRP - EXI AAL ABK
single piece extruded aluminum housing combines strength and durability with superior mechanical and
ORDERING SEQUENCE
electrical features. With the Executive’s unique “On The Door” mechanical system, everything is easy to install,
maintain, and will stand the test of time. The SQ and SQR families are available in two sizes (SQ19, SQ25 and HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
SQR19, SQR25) to accommodate any design application. The Executive family of products continues the (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
standard for performance and quality in today’s marketplace.
EXEC-SQ25 Arm Dimension: 2" x 4 " x 8" SQR19 100MH (ED17) 3H Type-III Hydro
1
208 10 32 HS House Side Shield
4
VF Vertical Slip Fitter BZ Dark Bronze
Tie-Rod Spacing: 3" (9/16" dia. holes)
• 400 watt max 150MH (ED17)* 5H Type-V Hydro
1
240 N Not Required HF Horizontal Slip Fitter WH White
Fixture EPA: 1.5 (10 - single)
• Full format ED37 lamp available Photocell Receptacle AL Natural Aluminum
SQ19
3.0 (28 - 2@180) (29 - 2@90) 175MH (ED28) 277 PRL
• Full cutoff segmented and 3.5 (39 - 3@90) (32 - 3@120) 28 39 Luminaire
2S Type-II Seg
1
250MH (ED28) 347
hydroform optics 5.0 (49 - 4@90)
3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
removable without tools 4L Type-IV Long Seg
1
LBZ Light Bronze
29 49 QTZ 5 Quartz Restrike
4W Type-IV Wide Seg
1
MBZ Medium Bronze
FL Fuse Luminaire
70HPS (ED23.5) 5S Type-V Seg
1
DBZ Dark Bronze
EXI Extruded Arm Insert
6
SQR19
EXEC-SQR25 Fixture Dimension: 19" x 19" x 9.45" 150HPS (ED23.5) 2H Type-II Hydro
1
N Not Required AAL Natural Aluminum
• 400 watt max Arm Dimension: 2" x 4 " x 8" 250HPS (E18) 3H Type-III Hydro
1
NS Non-Standard Finish
Tie-Rod Spacing: 3" (9/16" dia. holes) (consult factory)
• Full format ED37 lamp available
• Cutoff optical refractor and Fixture EPA: 1.8 (10 - single)
3.6 (28 - 2@180) (29 - 2@90)
hydroform combo 5.7 (39 - 3@90) (32 - 3@120) *150MH requires M102 lamp.
• Everything is accessible or 7.5 (49 - 4@90)
removable without tools
ORDERING SEQUENCE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
SQ25
• Reduced jacketed ED28 lamp Fixture EPA: 277 PRL Photocell Receptacle
4.4 (28 - 2@180) (29 - 2@90) 28 39 Luminaire
• Full cutoff segmented and 200PMH (pulse ED28) 2S Type-II Seg
1
347
6.6 (39 - 3@90) (32 - 3@120)
hydroform optics 8.8 (49 - 4@90) 350PMH (pulse ED28) 3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
LBZ Light Bronze
4L Type-IV Long Seg
1
removable without tools 400PMH (pulse ED28)
QTZ Quartz Restrike
5
SQR25
• 250 watt max 400HPS (E18) 2H Type-II Hydro
1
N Not Required
• Reduced jacketed ED28 lamp
• Cutoff optical refractor and
SQR25 3H Type-III Hydro
1 NS Non-Standard Finish
(consult factory)
Fixture Dimension: 25" x 25" x 11.75"
hydroform combo Arm Dimension: 2" x 4 " x 8"
• Everything is accessible or Tie-Rod Spacing: 3" (9/16" dia. holes)
removable without tools Fixture EPA: 2.7 (10 - single)
5.4 (28 - 2@180) (29 - 2@90)
NOTES:
8.1 (39 - 3@90) (32 - 3@120)
1) All reflectors (minus the 5H & 5S) are field rotatable without tools. 4) The 'HS' houseside shield option is n/a with the '5H' or '5S' reflector.
10.8 (49 - 4@90) 2) '32' mounting (3@120) only available with round pole or modified pole top fitter. 5) The 'QTZ' quartz restrike option will have a 2-minute delay, and is only available in150W with DCBAYONET.
3) The 'SG' stone guard option is clear polycarbonate and attaches to the door via (2) extrusions. 6) If the color for the 'EXI' extruded arm insert is not specified, insert will be brushed aluminum.
'SG' N/A with 'SQR' product.
Note: Arms shown with optional ‘EXI’ insert
Executive SQUARE & REFRACTOR
ORDER EXAMPLE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
The Executive SQ and SQR families blend traditional square styling with sophisticated engineering. The EXEC SQ25 400MH 3S 277 C 28 N PRP - EXI AAL ABK
single piece extruded aluminum housing combines strength and durability with superior mechanical and
ORDERING SEQUENCE
electrical features. With the Executive’s unique “On The Door” mechanical system, everything is easy to install,
maintain, and will stand the test of time. The SQ and SQR families are available in two sizes (SQ19, SQ25 and HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
SQR19, SQR25) to accommodate any design application. The Executive family of products continues the (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
standard for performance and quality in today’s marketplace.
EXEC-SQ25 Arm Dimension: 2" x 4 " x 8" SQR19 100MH (ED17) 3H Type-III Hydro
1
208 10 32 HS House Side Shield
4
VF Vertical Slip Fitter BZ Dark Bronze
Tie-Rod Spacing: 3" (9/16" dia. holes)
• 400 watt max 150MH (ED17)* 5H Type-V Hydro
1
240 N Not Required HF Horizontal Slip Fitter WH White
Fixture EPA: 1.5 (10 - single)
• Full format ED37 lamp available Photocell Receptacle AL Natural Aluminum
SQ19
3.0 (28 - 2@180) (29 - 2@90) 175MH (ED28) 277 PRL
• Full cutoff segmented and 3.5 (39 - 3@90) (32 - 3@120) 28 39 Luminaire
2S Type-II Seg
1
250MH (ED28) 347
hydroform optics 5.0 (49 - 4@90)
3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
removable without tools 200PMH (pulse ED28) 4L Type-IV Long Seg
1
LBZ Light Bronze
29 49 QTZ 5 Quartz Restrike
4W Type-IV Wide Seg
1
MBZ Medium Bronze
FL Fuse Luminaire
70HPS (ED23.5) 5S Type-V Seg
1
DBZ Dark Bronze
EXI Extruded Arm Insert
6
SQR19
EXEC-SQR25 Fixture Dimension: 19" x 19" x 9.45" 150HPS (ED23.5) 2H Type-II Hydro
1
N Not Required AAL Natural Aluminum
• 400 watt max Arm Dimension: 2" x 4 " x 8" 250HPS (E18) 3H Type-III Hydro
1
NS Non-Standard Finish
Tie-Rod Spacing: 3" (9/16" dia. holes) (consult factory)
• Full format ED37 lamp available
• Cutoff optical refractor and Fixture EPA: 1.8 (10 - single)
3.6 (28 - 2@180) (29 - 2@90)
hydroform combo 5.7 (39 - 3@90) (32 - 3@120) *150MH requires M102 lamp.
• Everything is accessible or 7.5 (49 - 4@90)
removable without tools
ORDERING SEQUENCE
HOUSING STYLE/SIZE LAMP WATTAGE REFLECTOR VOLTAGE BALLAST MOUNTING SHIELD OPTIONS GENERAL OPTIONS HOUSING FINISH EXI FINISH (if req'd)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
SQ25
• Reduced jacketed ED28 lamp Fixture EPA: 277 PRL Photocell Receptacle
4.4 (28 - 2@180) (29 - 2@90) 28 39 Luminaire
• Full cutoff segmented and 200PMH (pulse ED28) 2S Type-II Seg
1
347
6.6 (39 - 3@90) (32 - 3@120)
hydroform optics 8.8 (49 - 4@90) 350PMH (pulse ED28) 3S Type-III Seg
1
480 PRP Photocell Receptacle Anodized
• Everything is accessible or Pole Cap
LBZ Light Bronze
4L Type-IV Long Seg
1
removable without tools 400PMH (pulse ED28)
QTZ Quartz Restrike
5
SQR25
• 250 watt max 400PMH (E18) 2H Type-II Hydro
1
N Not Required
• Reduced jacketed ED28 lamp
• Cutoff optical refractor and
SQR25 3H Type-III Hydro
1 NS Non-Standard Finish
(consult factory)
Fixture Dimension: 25" x 25" x 11.75"
hydroform combo Arm Dimension: 2" x 4 " x 8"
• Everything is accessible or Tie-Rod Spacing: 3" (9/16" dia. holes)
removable without tools Fixture EPA: 2.7 (10 - single)
5.4 (28 - 2@180) (29 - 2@90)
NOTES:
8.1 (39 - 3@90) (32 - 3@120)
1) All reflectors (minus the 5H & 5S) are field rotatable without tools. 4) The 'HS' houseside shield option is n/a with the '5H' or '5S' reflector.
10.8 (49 - 4@90) 2) '32' mounting (3@120) only available with round pole or modified pole top fitter. 5) The 'QTZ' quartz restrike option will have a 2-minute delay, and is only available in150W with DCBAYONET.
3) The 'SG' stone guard option is clear polycarbonate and attaches to the door via (2) extrusions. 6) If the color for the 'EXI' extruded arm insert is not specified, insert will be brushed aluminum.
'SG' N/A with 'SQR' product.
Note: Arms shown with optional ‘EXI’ insert
EXEC-SQ & SQR Written Specifications
Housing
The luminaire housing shall be mitre-formed construction from a single piece of aluminum
extrusion, with only a single seam located on the back of the box where the arm detail is
located. The sidewall extrusion shall incorporate an integral structural rib for additional
strength and support that runs the full perimeter of the housing. The luminaire canopy shall
be of aluminum sheet that is peaked and crimped directly into a specially designed upper lip
of the sidewall extrusion. This lip shall be lined with an Isocryl gasket prior to the crimping
process to form a fully sealed canopy without the use of silicone or welds.
Arm Assembly
Single piece extruded aluminum arm is standard, with an optional aluminum decorative insert
(color/finish to be specified). The arm is fastened to the pole via (2) non-slip tie rod channels
serving as a compression member with (2) 1/2″ zinc-plated steel tie-rods and lock nuts in
tension between the pole and luminaire.
Electrical
All electrical components are cULus recognized, factory tested, and mounted to a
galvanized steel ballast tray that sits directly onto the reflector platen which mounts directly to
the door assembly. The ballast tray is fastened to the reflector platen via a single thumbscrew
and slide-catch for tool-less removal. Each high power factor ballast is capable of starting tem-
peratures down to -20° F (-28.9° C). The 600-volt insulated wiring shall be installed between
101 CORPORATE DRIVE socket and ballast components via electrical quick disconnects. A Sterner designed Primary
SPARTANBURG, SC 29303 Electrical Disconnect (male/female plug system) is mounted to the ballast tray and housing
TEL 864.599.6000 FAX 864.699.4740 respectively. The primary electrical circuit shall be disconnected as soon as the door drops in
www.sternerlighting.com the open position, thus eliminating any exposed live electrical connections and possible shock
hazard during service. The entire fixture is cULus listed for wet locations use.
Finish
Finished parts shall be washed in a multi-stage phosphate processing system and then
finished with a standard polyester urethane powder coat paint. The door frame assembly shall
always be anodized in a natural finish. Optional anodized finishes are available and shall use
an electrolytic process to oxidize and colorize the aluminum for a finish that is extremely
resistant to flaking, fading, and corrosive environments. Standard powder colors are dark
bronze, black, white, and natural aluminum. Standard anodized colors are bronze (light,
medium, & dark), black, and natural aluminum. Custom powder, anodized, and wet finishes
Hubbell Lighting, Inc. are available (contact factory for availability).