Professional Documents
Culture Documents
com on 2022-03-23
GE 40 ES
Technical specification
Regular relubrication
Lubricant – grease
DIMENSIONS
40 Bore
d mm diameter
62 Outside
D mm diameter
28 Nominal
B mm width
22 Width outer
C mm ring
α 7 ° Angle of tilt
53 Raceway diameter
dk mm inner ring
Page 1 of 3
Generated from www.skf.com on 2022-03-23
min.0.6 Chamfer
r1 mm dimension bore
ABUTMENT DIMENSIONS
min.43.6 Abutment
da mm diameter shaft
max.45 Abutment
da mm diameter shaft
min.50.3 Abutment
Da mm diameter housing
max.57.8 Abutment
Da mm diameter housing
max.0.6 Fillet
ra mm radius shaft
CALCULATION DATA
Material
constant KM 330
MASS
Page 2 of 3
Generated from www.skf.com on 2022-03-23
Copyright
Copyright in this website / app copyright of the information and software made available on this
website / app rest with SKF or its licensors. All rights are reserved. All licensed material will reference
the licensor that has granted SKF the right to use the material. The information and software made
available on this website / app may not be reproduced, duplicated, copied, transferred, distributed,
stored, modified, downloaded or otherwise exploited for any commercial use without the prior written
approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals
without prior written approval of SKF. Under no circumstances may this information or software be
supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
Page 3 of 3