Professional Documents
Culture Documents
Indar MH Submersible Motors and Pumps
Indar MH Submersible Motors and Pumps
This allows Indar to fully test its designs to guarantee the best quality Technical expertise and the spirit of adaptability have been
in its products, thus developing products and services adapted to and remain our main strength and hallmark.
the characteristics of each project and client. The main philosophy
of INDAR is to guarantee the quality and reliability with in-house
proven solutions.
Beasain
SUBMERSIBLE
Our outstanding testing capabilities include: Milwaukee (Spain)
(USA)
Head up to 3300 ft
Mexico
(Mexico D.F.) WATER ENGINEERING
MOTORS AND PUMPS
Power: 4000 HP
Manufacturing Units
Voltage: 13.8 kV Commercial Agencies
Service Centres
50Hz, 60Hz, Frequency converter
Rev. Oct/16
Indar Máquinas Hidráulicas S.L.
www.indarpump.com
SP BF Range: Features:
Flow up to 44,000 USgpm
- Mono-cellular pumps
Head up to 330 ft
- Driven by INDAR submersible air filled
Power up to 1,600 HP
ISM MF motor:
Voltages up to 13.8 kV
- Asynchronous, three phases, squirrel
Submersible solutions From 4 to 12 poles
Water supply cage
for engineering water - 50Hz, 60Hz, suitable for VFD
- Solutions for wet and dry installations
Whenever there is flood risk, water at high depths, acoustic
contamination, reduced space availability, restrictions for
adapting the installation to existing equipment, urgency for
readiness, requirements out of standards, necessity for Waste water treatment
large and powerful pump motor sets, maintenance free
submersible solutions, equipment designed for the applica-
tion and type of use, our clients count on the most reliable
and competitive submersible solutions in the market.
Available in cast iron, SS316, Duplex, Super Duplex,… Compact, less space required
Power plants
Solutions for dams, deposits, wells, chambers, lakes, No alignment needed
reservoirs, canisters,... Reduced foundation and lifting support infrastruc-
H series: axial propeller pump with shroud ture needed
Cables are protected from the flow and solids pumped.
Set ready to be installed with the flange to the discharge pipe. Direct transmission of power
The installation is simplified as the shroud becomes part of the
discharge pipe and the set hangs from it and the cooling conditions no Ready to be installed and operate
longer depend on the installation, geometry, etc.