Professional Documents
Culture Documents
Telephone: 1-800-458-1782
Outside U.S.: 773-353-4047
Fax: 773-583-1751
E-Mail: info@americompus.net
Website: www.americompus.net
Section
Dealer Information
Pricing Summaries
Discounts & Terms
Calculating Pricing
Contact Information
Shipping Information
Warranty Information
Returned Goods Policy
Equipment Fax Order Form
Accessories Fax Order Form
Support Material Fax Order Form
Dealer Application Form
Systems
Medical
AM1 Elevator Table System
AM2 Float Top Table System
AM3 Integrated Table System
AM4 Stationary Table System
AM5 Compact Table System
Chiropractic
AC1 17” System
AC2 36” System
AC4 17” Fixed S.I.D. System
Veterinary
AV1 Integrated Table System
AV2 Integrated 60 Hz Generator System
AV3 Integrated High Frequency Generator
System
Section
Generators
Generator Packages
Spectra 30HF AP
Spectra 30HF
Spectra 325e
Components
Tubes
Collimators
High Voltage Cables
Tables
Tubestands
Wallstand Packages
Wallstands
Wallholders
Grid Cabinets
Buckys
Cassette Trays
Grids
Accessories
X-ray Room
Dark Room
Exam Room
Parts
Generator Parts
Collimator Parts
Miscellaneous Parts
Technical Data
Section Index
Pricing Summaries D1
Calculating Pricing D4
Contact Information D5
Shipping Information D6
Warranty Information D7
Generator Types
Medical Systems
Chiropractic Systems
Veterinary Systems
Generator Packages
(includes generator, tube, & $ 10,320 $ 15,650 $ 16,480
15 ft. HV Cables)
Generators
(no tube) $ 6,985 $ 12,320 $ 13,150
Generator Types
Medical Systems
Chiropractic Systems
Veterinary Systems
Generator Packages
(includes generator, tube, & $ 6,190 $ 9,390 $ 9,890
15 ft. HV Cables)
Generators
(no tube) $ 4,190 $ 7,390 $ 7,890
Discounts
Items in the Price Book receive the following discounts from list price:
Conditions of Sale
• All prices are F.O.B. factory. Freight collect.
• Items and all prices are subject to change without notice.
• Minimum invoice amount for any order is $75 dealer net.
• Payment terms are net thirty (30) days with an approved credit application.
• Accounts which are unpaid thirty (30) days after the invoice date will be subject to an interest charge of
1.5% per month on the unpaid balance.
• Payments made by credit cards greater than 10 days from invoice date will be subject to a 3% service
charge. Payments made by credit cards less than or equal to 10 days after invoice date will not incur the
service charge.
Your cost: dealer net of system + dealer net of option = net price
Note: Since list price for options is provided, first multiply the list price by 0.6 to obtain net pricing.
• Not all components are compatible. Only factory authorized substitutions and deletions are allowed.
Contact Americomp for more information.
• To replace any system component with a similar component from the Americomp Price Book:
Your cost:
dealer net of system + dealer net of desired item - dealer net of replaced item = net price
Deleting a Component
• Only factory authorized substitutions and deletions are allowed. Contact Americomp for more information.
• Full credit will not be allowed for items deleted from a system. The following credit will be allowed for
component deletions:
Freight Terms
Freight Carriers
• Please inform us of your preferred carrier with whom you have an account
• Americomp will make reasonable efforts to use your preferred carrier
• If you do not have a preferred carrier, we will choose one and assist you in setting up an account
Damaged Freight
IMPORTANT NOTICE
• Examine contents of all packages received for damage. If the carton shows signs of damage, make a notation
on the delivery receipt and request an inspection by the freight carrier.
• If the damage cannot be detected until the package is opened, call the freight carrier for an inspection and get
a concealed damage order report.
• Claims for damage, visible or concealed, must be filed by the purchasing dealer. Americomp cannot assume
responsibility for loss or breakage in transit.
• If Americomp is required to file a claim, a $200 service charge will be billed to the dealer. This service does
not guarantee payment of claim by the carrier.
Please refer also to the Returned Goods Policy (page D9) for information and procedures to return products to
Americomp.
New equipment manufactured by Americomp is warranted for five (5) years from the invoice date as follows:
• Any part proving defective will be repaired or replaced free of charge, F.O.B. factory, if the defective part is
returned for inspection, freight charges prepaid.
• This warranty covers parts only.
• Americomp reserves the right to fulfill warranty requirements with new or refurbished components that meet or
exceed current product performance and specifications.
Warranty Exclusions
This warranty is not transferable to a new owner unless authorized by Americomp in writing. Refer to Returned
Goods Policy for further details regarding shipping charges.
Any part shipped during the warranty period to correct a failure under warranty is warranted only for the unexpired
term of the warranty of the original product. Americomp reserves the right to fulfill warranty requirements with new
or refurbished components that meet or exceed current product performance and specifications.
Non-Warranty parts purchased from Americomp are warranted for six (6) months from the invoice date and are
subject to the conditions of the General Equipment Warranty. Americomp reserves the right to fulfill non-warranty
requirements with new or refurbished components that meet or exceed current product performance and
specifications.
Unless specifically stated otherwise, vended products listed below will carry only the warranty of their respective
manufacturer and are subject to the conditions of the General Equipment Warranty:
Americomp extends original manufacturer’s warranty on x-ray tubes purchased with Americomp x-ray systems.
X-ray tubes will carry a five (5) year pro-rated warranty, from the date of invoice.
All Returns
All returned goods:
• Must have verbal authorization in the form of an R.G. authorization number. Call Customer Service to
obtain an R.G. number.
• Must be returned freight prepaid. Any freight sent collect will be refused or rebilled to the sender.
• Must be returned with 60 days of shipment of replacement part. All returnable items held by the dealer
over 60 days will be considered an open invoice.
Warranty Items
Upon inspection by Americomp or supplier of the product, credit will be issued as follows:
• Manufacturing defect - full credit for the returned item
• Not a manufacturing defect - Americomp will issue credit as stated in Cancelled Orders or Misorders of
this policy
Freight
• All items must be prepaid. Any freight sent collect will be refused or rebilled to the sender.
• Warranty items will be shipped by routine ground service and the dealer will be billed for freight. Any
premium shipping service expense is the responsibility of the dealer.
• Warranty items returned for credit within sixty (60) days of the replacement part invoice date will get
credit for the routine outbound freight.
• Any part returned after sixty (60) days will not receive any credit for freight.
Shipping Damage
• Shipments are F.O.B. Americomp dock.
• Purchasing dealers are responsible for filing claims when shipping damage occurs.
• If Americomp is required to file a claim, a $200 service charge will be billed to the dealer. This service
does not guarantee payment of claim by carrier.
Clinic
Address
COMPONENTS / ACCESSORIES: City
State Zip
Phone
Dealer Name
Address
Contact Person
Phone
Arrival date required
Fax Preferred Carrier
Dealer Name
Address
Contact Person
Phone Arrival date required
Fax
Preferred Carrier
APRIL 2006
Support Material Request Form
Fax to: 773-583-1751
Request Date:
Ship Via:
LITE004 General Purpose Medical Literature (Systems AM3, AM4 & AM5)
Other
APRIL 2006
Your competitive edge; AMERICOMP’s 5 year parts
warranty on systems and generators. SYSTEMS
Section Index
Medical
AM1 Elevator Table System & Options S1
Chiropractic
AC1 17” System & Options S11
Veterinary
AV1 Integrated Table System & Options S17
A0020 Cables
• 20ft. high voltage cables with federal terminations
A202 Collimator
• Certified manual collimator with light field and swivel mount
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• 76” table top in place of 84” $ 550
• Heavy-duty cassette tray in place of regular-duty $ 193
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Tubestand Options
• Extended tubestand rails (10ft.) with 8.5ft. travel $ 400
(includes 25ft. high voltage cables)
• Floor-to-wall or floor-to-ceiling tubestand A3306 Deduct $ 2,775
with 8ft. rails and electric locks, in place of S225
• Floor-to-wall or floor-to-ceiling tubestand with transverse Deduct $ 1,760
tubearm, +/-5” motion platform tube mount S114
with 8ft. rails and electric locks, in place of S225
• Overhead tube crane with 167 in. ceiling rails, digital vertical Call for price
SID indicators, 6 in. trunnion ringmount, angulation dial,
operator handgrips, electric locks and 50ft. high voltage cables,
in place of S225 (One-year parts warranty)
• 5-year parts warranty $ 500
Tube/Collimator/Cable Options
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Linear II PBL collimator upgrade consisting of: $ 7,920
(1) collimator with motor driven shutters, provides
automatic operation at discrete SIDs
(2) size-sensing cassette trays
(2) PBL conversion hardware for table and wallstand
(1) set of SID switches and actuator for tubestand
• Additional 5ft. of high voltage cable length $ 80
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Two (2) three field ionization chambers for AEC $ 5,800
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
A0020 Cables
• 20ft. high voltage cables with federal terminations
A202 Collimator
• Certified manual collimator with light field and swivel mount
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• 76” table top in place of 84” $ 550
• Heavy-duty cassette tray in place of regular-duty $ 193
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Tubestand Options
• Extended tubestand rails (10ft.) with 8.5ft. travel $ 400
(includes 25ft. high voltage cables)
• Floor-to-wall or floor-to-ceiling tubestand A3306 Deduct $ 2,775
with 8ft. rails and electric locks, in place of S225
• Floor-to-wall or floor-to-ceiling tubestand with transverse Deduct $ 1,760
tubearm, +/-5” motion platform tube mount S114
with 8ft. rails and electric locks, in place of S225
• Overhead tube crane with 167 in. ceiling rails, digital vertical Call for price
SID indicators, 6 in. trunnion ringmount, angulation dial,
operator handgrips, electric locks and 50ft. high voltage cables,
in place of S225 (One-year parts warranty)
• 5-year parts warranty $ 500
Tube/Collimator/Cable Options
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Linear II PBL collimator upgrade consisting of: $ 7,920
(1) collimator with motor driven shutters, provides
automatic operation at discrete SIDs
(2) size-sensing cassette trays
(2) PBL conversion hardware for table and wallstand
(1) set of SID switches and actuator for tubestand
• Additional 5ft. of high voltage cable length $ 80
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for 325e generator (does not include ion chamber) $ 4,153
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Two (2) three field ionization chambers for AEC $ 5,800
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
A0020 Cables
• 20ft. high voltage cables with federal terminations
A202 Collimator
• Certified manual collimator with light field and swivel mount
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Electric locks, vertical, in place of mechanical locks $ 275
• Par speed bucky in place of grid cabinet $ 1,320
• Tilting wallstand package A6200 with mechanical lock in place of A6000 $ 715
• Heavy-duty cassette tray in place of regular-duty $ 193
Tubestand Options
• Extended tubestand rail for off-table procedures $ 580
(specify left or right), includes extended length
high-voltage cables (25ft.)
Tube/Collimator/Cable Options
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Linear II PBL collimator upgrade consisting of: $ 7,920
(1) collimator with motor driven shutters, provides
automatic operation at discrete SIDs
(2) size-sensing cassette trays
(2) PBL conversion hardware for table and wallstand
(1) set of SID switches and actuator for tubestand
• Additional 5ft. of high voltage cable length $ 80
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Two (2) three field ionization chambers for AEC $ 5,800
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
A3306 Tubestand
• Floor-to-wall or floor-to-ceiling tubestand with 8ft. rails
• Electric locks
• Angulation dial and operator handgrips
• Angulating port-style tube mount with 17” arm
A0020 Cables
• 20ft. high voltage cables with federal terminations
A202 Collimator
• Certified manual collimator with light field and swivel mount
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Electric locks, vertical, in place of mechanical locks $ 275
• Par speed bucky in place of grid cabinet $ 1,320
• Tilting wallstand package A6200 with mechanical lock in place of A6000 $ 715
• Heavy-duty cassette tray in place of regular-duty $ 193
Tubestand Options
• Deluxe transverse rotational tubestand S225 with 8ft. rails $ 2,855
and electric lock, in place of A3306 (includes 20ft. high
voltage cables)
• Transverse tubearm S114 +/-5” motion platform tube $ 1,015
mount with electric locks, in place of A3306
Tube/Collimator/Cable Options
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Linear II PBL collimator upgrade consisting of: $ 7,920
(1) collimator with motor driven shutters, provides
automatic operation at discrete SIDs
(2) size-sensing cassette trays
(2) PBL conversion hardware for table and wallstand
(1) set of SID switches and actuator for tubestand
• Additional 5ft. of high voltage cable length $ 80
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Two (2) three field ionization chambers for AEC $ 5,800
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
A3306 Tubestand
• Floor-to-wall or floor-to-ceiling tubestand with 8ft. rails
• Electric locks
• Angulation dial and operator handgrips
• Angulating port-style tube mount with 14” arm
A1006 Grid
• 8:1 ratio, 103 LPI
A0015 Cables
• 15ft. high voltage cables with federal terminations
A202 Collimator
• Certified manual collimator with light field and swivel mount
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid 855
• 56” x 24” stationary top table with 12” metal drop-leaf $ 265
on one end, 20lb. weight load (specify left or right) in place of 76” x 24” table
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• 17” wallstand with grid cabinet, 8:1 ratio grid and $ 1,525
regular-duty cassette tray, A6000 in place of Wall Cassette Holder
Tubestand Options
• Transverse tubearm S114 +/-5” motion platform tube $ 1,015
mount with electric locks, in place of A3306
Tube/Collimator/Cable Options
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Additional 5ft. of high voltage cable length $ 80
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Two (2) three field ionization chambers for AEC $ 5,800
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
A3306 Tubestand
• Floor-to-wall tubestand with 5ft. rails
• Mechanical locks
• Angulation dial and operator handgrips
• Angulating port-style tube mount with 10” arm
A0015 Cables
• 15ft. high voltage cables with federal terminations
A201 Collimator
• Certified manual collimator with light field, non-swivel
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Tubestand/Tube/Collimator/Cable Options
• Electric locks, vertical and horizontal, $ 315
in place of mechanical locks
• Extended tube stand rails (8ft) for A3306, with 6.5ft. travel $ 185
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Collimator with swivel mount in place of non-swivel mount $ 275
• Additional 5ft. of high voltage cable length $ 80
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid 855
• Electric locks, vertical, in place of mechanical lock $ 275
• Tilting wallstand package A6200 with mechanical lock in place of A6000 $ 715
• Heavy-duty cassette tray in place of regular-duty $ 193
Additional Options
• Mobile radiographic table with 8:1 grid, grid cabinet and $ 2,485
regular-duty cassette tray A3199, requires 14” tubearm in place of 10” tubearm
• Table pad: 4” thick, gray naugahyde covered foam $ 525
(radiopaque), specify 56” or 76” length
• Drop-leaf for mobile table; 12” metal, 20lb. weight load 265
(specify left or right)
• Table pad for drop-leaf extension only $ 265
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
• Additional control to transformer cables (24ft. standard) $ 8/ft.
for 325e generator
A3306 Tubestand
• Floor-to-wall tubestand with 5ft. rails
• Mechanical locks
• Angulation dial and operator handgrips
• Angulating port-style tube mount with 10” arm
A0015 Cables
• 15ft. high voltage cables with federal terminations
A201 Collimator
• Certified manual collimator with light field, non-swivel
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Tubestand/Tube/Collimator/Cable Options
• Electric locks, vertical and horizontal, $ 315
in place of mechanical locks
• Extended tubestand rails (8ft) for A3306, with 6.5ft. travel $ 185
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
• Collimator with swivel mount in place of non-swivel mount $ 275
• Additional 5ft. of high voltage cable length $ 80
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 80
• Electric locks, vertical, in place of mechanical lock $ 275
• Par speed bucky in place of grid cabinet $ 870
• Heavy-duty grid cabinet and cassette tray in place of regular-duty $ 465
• Heavy-duty par speed bucky and cassette tray in place of regular-duty $ 1,340
Additional Options
• Mobile radiographic table with 8:1 grid, grid cabinet and $ 2,485
regular-duty cassette tray A3199, requires 14” tubearm in place of 10” tubearm
• Table pad: 4” thick, gray naugahyde covered foam $ 525
(radiopaque), specify 56” or 76” length
• Drop-leaf for mobile table; 12” metal, 20lb. weight load $ 265
(specify left or right)
• Table pad for drop-leaf extension only $ 265
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) four field ionization chamber for AEC $ 4,065
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
• Additional control to transformer cables (24ft. standard) $ 8/ft.
for 325e generator
A3284 Tubestand
• Stationary floor-to-wall tubestand
• Mechanical locks
• Angulation dial and operator handgrips
• Angulating port-style tube mount with 10” arm
A0015 Cables
• 15ft. high voltage cables with federal terminations
A201 Collimator
• Certified manual collimator with light field, non-swivel
Select a Generator
• Spectra 30HF AP, line cable included, 12ft. external length, specify line voltage
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Wallstand Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Electric locks, vertical, in place of mechanical lock $ 275
• Tilting wallstand package A6200 with mechanical lock in place of A6000 $ 715
• Heavy-duty cassette tray in place of regular-duty $ 193
Additional Options
• Mobile radiographic table with 8:1 grid, grid cabinet and $ 2,485
regular-duty cassette tray A3199, requires 14” tubearm in place of 10” tubearm
• Table pad: 4” thick, gray naugahyde covered foam $ 525
(radiopaque), specify 56” or 76” length
• Drop-leaf for mobile table; 12” metal, 20lb. weight load $ 265
(specify left or right)
• Table pad for drop-leaf extension only $ 265
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• AEC logic for HF generators (does not include ion chamber) $ 1,785
• One (1) three field ionization chamber for AEC $ 2,900
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
• Additional control to transformer cables (24ft. standard) $ 8/ft.
for 325e generator
A 6062V Table/Tubestand
• Enclosed table, stationary 56” x 24” top
• Welded-base construction
• Full travel lead-lined grid cabinet
• Grid: 8:1 ratio, 103 LPI
• Grid cabinet/tubestand interlock
• Attached, fully-counterbalanced tubestand; travels full table length
• Full vertical travel
• Mechanical locks
• Angulation dial and operator handle
• Foot switch
• Regular-duty manual cassette tray
A120 Tube
• 1.0-2.0mm focal spots, 140,000 heat units with 90 degree horns
A0010 Cable
• 10ft. high voltage cable with federal terminations
A8048-2 Collimator
• Manual with light field and swivel mount
Select a Generator
• Spectra 30HF, line cable included, 12ft. external length, specify line voltage
• Spectra 325e, line cable included, 11ft. external length, specify line frequency; 60 Hz or 50 Hz
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• 12” table-top extension (specify left or right) $ 265
• Animal restraining device $ 90
• Electric locks-horizontal and vertical $ 365
Tubestand Options
• Floor-to-wall for ceiling tubestand for off table radiography $ 85
includes mechanical locks, in place of attached tubestand
and 15ft. high voltage cables
Tube/Collimator Options
• Certified light-field collimator with swivel mount, A202 in place of A8048-2 $ 450
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
Generator Options
• Step-up transformer for HF generators, for line voltages $ 365
measuring 208-229V
• Pedestal mount for operator console, HF generators only $ 550
• Wall mount for operator console, HF generators only $ 165
Integrated 60 Hz Generator
• kVp range: 40-125, 64 selections
• mA stations: 100S, 300L
• Timer range: 1/120th-1 second, 18 selections
• mAs range: 0.8-300 mAs
• Digital mAs readout
• Digital kVp readout
• Digital diagnostic readout
• Built-in tube protection
• Adjustable volume, audible exposure signal
• SCR contactor
• Line cable included, 8 AWG-3 conductor,
13 ft. external length
Table/Tubestand
• Enclosed table, stationary 56” x 24” top
• Welded-base construction
• Full travel lead-lined grid cabinet
• Grid: 8:1 ratio, 103 LPI
• Grid cabinet/tubestand interlock
• Attached, fully-counterbalanced tubestand; travels full table length
• Full vertical travel
• Mechanical locks
• Angulation dial and operator handle
• Foot switch with 20 ft. cord
• Simplex™ manual cassette tray (incompatible with metric cassette sizes)
A120 Tube
• 1.0-2.0mm focal spots, 140,000 heat units with 90 degree horns
A0010 Cable
• 10 ft. high voltage cable with federal terminations
A8048-1 Collimator
• Manual with light field
• Field light “on” time-selectable 30, 60, 90 or 120 seconds (factory set at 60)
• Long life “soft-start” bulb circuits
• Easy-to-operate with gloves on
• Exceeds federal standards for radiation leakage protection
Table Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• 12” table-top extension (specify left or right) $ 265
• Animal restraining device $ 90
• Standard manual cassette tray in place of Simplex™ tray N/C
• Wall mounted, remote hand operated exposure switch N/C
in place of foot switch
• Wall mounted, remote hand operated exposure switch $ 180
in addition to foot switch
Tube/Collimator Options
• Swivel mount for collimator $ 85
• Certified light-field collimator with swivel mount, A202 in place of A8048-1 $ 450
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
Table/Tubestand
• Enclosed table, stationary 56” x 24” top
• Welded-base construction
• Full travel lead-lined grid cabinet
• Grid: 8:1 ratio, 103 LPI
• Grid cabinet/tubestand interlock
• Attached, fully-counterbalanced tubestand; travels full table length
• Full vertical travel
• Mechanical locks
• Angulation dial and operator handle
• Foot switch with 20 ft. cord
• Simplex™ manual cassette tray (incompatible with metric cassette sizes)
A120 Tube
• 1.0-2.0mm focal spots, 140,000 heat units with 90 degree horns
A0010 Cable
• 12 ft. high voltage cable with federal terminations
A8048-1 Collimator
• Manual with light field
• Field light “on” time-selectable 30, 60, 90 or 120 seconds (factory set at 60)
• Long life “soft-start” bulb circuits
• Easy-to-operate with gloves on
• Exceeds federal standards for radiation leakage protection
Tube/Collimator Options
• Swivel mount for collimator $ 85
• Certified light-field collimator with swivel mount, A202 in place of A8048-1 $ 450
• Upgrade tube to 0.6-1.5mm focal spots, 200,000 heat units $ 1,300
• Upgrade tube to 1.0-2.0mm focal spots, 300,000 heat units $ 4,000
• Upgrade tube to 0.6-1.2mm focal spots, 300,000 heat units $ 4,000
Generator Options
• Step-up transformer for line voltages measuring 208-229V $ 365
Section Index
Generator Packages
Spectra 30HF AP
Generator Package
• 20kHz, 30 kW High Frequency (HF) generator with Anatomical Programming
Line cable included, 12ft. external length. Specify line voltage.
Specify APR software: Medical or Chiropractic
• X-ray tube: 1.0-2.0mm focal spots, 140,000 heat units
• 15ft. high voltage cables, 125 kVp
Spectra 30HF
Generator Package
• 20kHz, 30kW High Frequency (HF) generator
Line cable included, 12ft. external length. Specify line voltage.
• X-ray tube: 1.0-2.0mm focal spots, 140,000 heat units
• 15ft. high voltage cables, 125 kVp
Spectra 325e
Generator Package
• 60Hz generator
Line cable included, 11ft. external length. Specify line frequency: 60 Hz or 50Hz.
• X-ray tube: 1.0-2.0mm focal spots, 140,000 heat units
• 15ft. high voltage cables, 125kVp
Additional Options
• A8048-2 Non-certified manual collimator with swivel mount $ 1,365
• A201 Certified manual collimator, 125kVp, non-swivel mount $ 1,540
• A202 Certified manual collimator, 125kVp, with swivel mount $ 1,815
• MC-150 Certified manual collimator, 150kVp, with swivel mount $ 2,250
• Linear II Certified automatic PBL collimator, 150kVp, $ 6,650
with swivel mount
SPECIFICATIONS
• 20kHz High Frequency technology • Line cable included, 12ft. external
• Modes of operation: AP (anatomical programming) Manual length
• kVp range: 40-125 in 1kV steps • Specify line voltage
• mAs range: 0.5-400 mAs • Specify APR software: Medical
• mA range: 50-300, 6 stations or Chiropractic
• Automatic line compensation • Specify x-ray tube type
• Microprocessor controlled
• Soft-touch control panel
• LCD display
• Programmable tube protect system
• Built-in self diagnostic with error display
• Audible and visible x-ray exposure indicator
• Receptor indicator (wall or table bucky, non-bucky)
• 50ft. Interconnect cable (control to power module)
• Dimensions: Operator console: 12” x 7” x 2”
Power module: 20” x 18” x 37”
• Weight: Operator console: 5lbs.
Power module: 190lbs.
• UL Classified
• Five-year parts warranty
*Complies with Federal standards at time of shipment
INPUT POWER
• 230-250 VAC, Single Phase, 50/60Hz, 100 Amp rated line minimum
• Maximum Momentary Line Current: 200 Amps at 240V, not continuous
SPECIFICATIONS
• 20kHz High Frequency technology • Line cable included, 12ft. external
• 30kW rating length
• kVp range: 40-125in. 1kV steps • Specify line voltage
• mAs range: 0.5-400 mAs • Specify x-ray tube type
• mA range: 50-300, 6 stations
• Microprocessor controlled
• Soft-touch control panel
• Digital display of kVp
• Dual digital display of mAs/mA
• mA selector
• Automatic line compensation
• Programmable tube protect system
• Built-in self diagnostics with error display
• Audible and visible x-ray exposure indicator
• Receptor indicator (wall or table bucky, non-bucky
• 50ft. Interconnect cable (control to power module)
• Dimensions: Operator console: 12” x 7” x 2”
Power module: 20” x 18” x 37”
• Weight Operator console: 5lbs.
Power module: 190lbs.
• UL Classified
• Five-year parts warranty
*Compiles with Federal standards at time of shipment
INPUT POWER
• 230- 250 VAC, Single Phase, 50/60 Hz, 100 Amp rated line minimum
• Maximum Momentary Line Current: 200 Amps at 240V, not continuous
SPECIFICATIONS
• 30kW rating • Line cable included, 11ft. external
• Maximum output 300 mA at 125kVp length
• kVp range: 40-125 in 2kV steps • Specify line frequency: 60 Hz or
• mAs range: 0.4-600 mAs 50Hz
• mA range: 50-300, 5 stations • Specify x-ray tube type
• Digital timer with 23 stations (1/120 to 6 seconds)
• Digital mAs display
• 8 step line compensator
• SCR contactor with back-up electromagnetic safety contractor
• Tube overload protection circuit
• Wear-resistant control panel
• Audible and visible x-ray exposure indicator
• Receptor indicator (wall or table bucky, non-bucky)
• Dimensions: Operator console: 23” x 12” x 46”
Transformer: 15” x 15” x 23”
• Weight: Operator console: 225lbs.
Transformer: 250lbs.
• UL Classified
• Five-year parts warranty
* Complies with Federal standards at time of shipment
INPUT POWER
• 230-250 VAC, Single Phase, 50/60Hz, 100 Amp rated line minimum
• Maximum Momentary Line Current: 200 Amps at 240V, not continuous
Section Index
Radiographic Tables C5
Tubestands C9
List Price
Note: All tubes below (except J986) require 6 in. trunnion rings.
J986 require 6.75 in. trunnion rings.
• A120-1 1.0-2.0mm focal spots, 140,000 heat units, 125 kVp, $ 2,900
17.5 degree target, available with 90 degree horns, one-year pro-rated
warranty, shoots left (Rad 8 equivalent)
• A110 1.0-2.0mm focal spots, 150,000 heat units, 125 kVp, $ 4,455
16 degree target, available with 90 degree horns,
one-year non pro-rated warranty (Rad 8)
• 01382 0.6-1.2mm focal spots, 300,000 heat units, 150kVp (Rad 14 equivalent) $ 6,900
• J984 0.6-1.2mm focal spots, 300,000 heat units, 150kVp (Rad 14) $ 7,200
• 00293 0.6-1.2mm focal spots, 300,000 heat units, 150kVp (Rad 68) $ 6,545
List Price
Manual
• A201 Certified manual collimator, 125kVp, non-swivel $ 1,540
mount, operates on 24VAC, includes 25ft. power cable
• J999 Certified manual collimator with laser bucky light line, 150kVp, $ 2,500
with swivel mount and tape measure
Options
• 02307 Power supply, 24VAC/24VDC output, 120VAC input, enclosed $ 200
in protective case
For collimators, tubestands and wallstands
Automatic
• HE28 Linear II certified automatic PBL collimator with motor driven $ 6,650
shutters, provides automatic operation at discrete SIDs, swivel mount
• J985 Linear IV certified automatic PBL collimator with motor driven $ 9,765
shutters, provides automatic operation at continuous SIDs swivel mount
Options
• E601 90 degree elbow kit - 2 ends $ 105
List Price
A4000 Elevator/Four-Way Float-Top Table $ 10,617
• 84” x 30” flat, seamless table top
• Variable table height, 22” to 33”
• +/-5” transverse travel
• 32” longitudinal travel
• Foot treadle operation of table top and
height movements
• Grid cabinet with electric lock
• 22” grid cabinet travel
• Grid: 8:1 ratio, 103 LPI
• Regular-duty cassette tray
• Operates on 120VAC
• 400lb. rated patient load
Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $1,320
• 76” table top in place of 84” $ 550
• Heavy-duty cassette tray in place of regular-duty $ 193
Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $1,320
• 76” table top in place of 84” $ 550
• Heavy-duty cassette tray in place of regular-duty $ 193
List Price
Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Extended rail for off table procedures (specify right or left) $ 500
• Par speed bucky in place of grid cabinet $ 1,320
• Heavy-duty cassette tray in place of regular-duty $ 193
List Price
Options
• Delete grid cabinet, grid and tray Deduct $ 900
• Drop-leaf: 12” metal, 20lb. weight load (specify left or right) $ 265
• Table pad: 4” thick, gray naugahyde covered foam (radiopaque), $ 525
specify 56” or 76” length
• Table pad for drop-leaf extension only $ 265
Options
• Drop-leaf: 12” metal, 20lb. weight load (specify left or right) $ 265
List Price
A6062V Veterinary Integrated Table/Tubestand $ 4,410
• 56” x 24” flat, seamless, table top
• 56” long, enclosed, welded pedestal
• Attached floating tubestand
• Angulating floating tube mount with 14” arm
• Angulation dial and operator handgrips
• Mechanical locks
• Lead lined grid cabinet with 34” travel
• Grid: 8:1 ratio, 103 LPI
• Grid cabinet to tubestand interlock
• Regular-duty cassette tray
• 300lb. rated patient load
Options
• Grid: 10:1 ratio, 103 LPI in place of 8:1 grid $ 70
• Grid: 8:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 790
• Grid: 10:1 ratio, 178 LPI in place of 8:1 grid, 103 LPI grid $ 855
• Electric locks - horizontal and vertical $ 365
List Price
J309 Overhead Tube Support Call for price
• Ceiling mounted tube support
• 167 in. ceiling rails
• Trunnion tube mount, 6 in. diameter
• Tube travel: 140 in. longitudinal, 94 in. transverse,
60 in. vertical
• Tube angulation: horizontal axis +/- 120º with
90º detents, vertical axis of +/- 150º
with 90º manual detents
• Digital vertical SID indicators
• Angulation dial, operator handgrips,
and electric locks
• Operates on 120 VAC
Options
• 191 in. ceiling rails in place of 167 in. (provides 164 in. N/C
of travel)
• Trunnion tube mount, 6.75 in. diameter in place $ 300
of 6 in. diameter
• Vertical 6 in. tubearm extension $ 300
• 5-year parts warranty $ 500
Options
• Extended rails (10ft.) with 8.5ft. travel $ 320
• External 24VDC power supply, D164 $ 165
(not required when ordering with a system)
List Price
S114 Floor-to-Wall or Floor-to-Ceiling $ 3,175
with Transverse Travel
• Fully counterbalanced
• Angulating port-style tube mount
• 24” angulating tubearm
• +/-5” transverse tube travel
• Angulation dial and operator handgrips
• Vertical, horizontal, transverse and tubearm angulation
electric locks
• 8ft. rails (provides 6.5ft travel)
• 91.25” minimum ceiling height
• Floor-to-wall or floor-to-ceiling mount
• 15.6” minimum (focal spot to floor), 73” maximum
vertical travel
• Operates on 24VDC
Options
• Extended rails (10ft.) with 8ft. travel $ 335
• Trunnion ring-style tube mount (6” diameter) $ 350
• External 24VDC power supply, D164 $ 165
(not required when ordering with a system)
• 5ft. rails (provides 3.5ft. travel) Deduct $ 185
Options
• Electrical locks, vertical and horizontal, in place of mechanical locks $ 315
• Substitute 8ft. rails (6.5ft. travel) $ 185
• Extended rails (10ft) with 8ft. travel $ 335
• Reduced column height for 84” minimum ceiling height $ 700
(71” maximum vertical travel)
• External 24VDC power supply D164 $ 165
(not required when ordering with a system)
Actual Film
Grid Size Sizes Lines Ratio Focal
(Inches) (Inches) (Per Inch) Range/Distance
Section Index
List Price
997-000 7” x 17” Cassette & 400 Green Screens $ 192
336-000 Glasses
0.5mm Pb equivalency, ultra light carbon fiber lens $ 130
carrier with adjustable silicon nose pads.
335-000 Gloves
Full-fingered, durable vinyl covered, lined glove. 0.5mm Pb equivalency, 15” length.
Available in pairs only. $ 165
List Price
329-000 Safelight
Fluorescent 18” safelight in a quality metal housing. Includes Red filter for Blue/Green
films, easily mounts to wall or ceiling, includes 6ft. power cord and pull cord On/off switch.
Power: 120 volt, 60Hz. UL approved fixture. Meets OSHA requirements for personnel
safety from lamp breakage. $ 90
962-000 Densitometer
Convenient pocket-sized unit requires 9v battery (included). Push button for instant digital
display of film density. Reliable and accurate. $ 625
List Price
337-000 Single Panel Viewbox
Steel construction with white powder coat finish, includes instant lamp turn-on, and self
adjusting gravity roller grip. Wall mounted. Includes 6 foot power cord. Power: 115 volt,
60Hz. UL and CSA approved. Dimensions: 14.5”W x 21”H x 3.5”D $ 160
334-000 Spotlight
Includes footswitch operation and tilts to any angle. Can be wall mounted, and includes
6 foot power cord. Power: 120 volt, 60Hz $ 165
Section Index
Generator Parts P1
Collimator Parts P2
Miscellaneous Parts P3
Note: To avoid unnecessary restocking charges we recommended consultation with our technical
support personnel before ordering control and transformer parts.
325e Transformer
E082 H.V. Receptacle, Federal Standard $ 75
A388 H.V. Rectifier Sticks, 300mA, 125kVp, Set of 4 Sticks $ 515
A8048-2 Collimators
220-000 Lamp Switch $ 35
D755 Lamp, FCS, 24VAC, 2 Pin Base, 150W $ 38
L883 Lamp Socket $ 35
L386 Manual, Installation N/C
J300 PCB, Lamp Timer $ 160
J428 Power Cable $ 150
G825 Window, Exit $ 41
Miscellaneous
A802-2 Front Panel
for 14” x 17” grid cabinets, 22.9”W x 19.2”H,
Supplied with Velcro for mounting $ 125
A802-1 AEC, Front Panel
Same as above but with 3 field pattern $ 145
A717-000 Front Panel
for 14” x 36” grid cabinets, 22.9”W x 38.8”H,
Supplied with Velcro for mounting $ 200
B067-2 Front Panel
for 14” x 17” buckys, 22.8”W x 22.4”H,
Supplied with Velcro for mounting $ 125
B067-1 AEC, Front Panel
Same as above but with 3 field pattern $ 145
B068 Front Panel
For 14” x 36” buckys, 22.8”W x 43”H,
Supplied with Velcro for mounting $ 200
Section Index
REFERENCE INFORMATION
• EQUIPMENT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
1. A 1/4" lag bolt with 2-1/2 inches of thread engagement into construction grade wood provides
approximately 500 pounds of pull-out strength.
2. A bolt and 1/2" expansion anchor with two inches of embedment in 300 psi concrete
provides approximately 500 pounds of pull-out strength.
1. The floor must be level in all directions, or the floor rail must be shimmed to level.
2. For tubestands, carpeted flooring is not recommended.If carpeting cannot be avoided, remove
the padding beneath the floor track.The majority of the weight of the tubestand is felt at the
front of the rail. As a result of carpet compression, it may be necessary to shim the front of the
floor track slightly to maintain a track which is level front-to-back.To prevent pulling a
"runner" in the carpet when drilling holes for mounting, cut the carpet at the edge of the floor
track or burn a pilot hole through the carpet with a large tip soldering iron.
1. Floor must be level in all directions. Leveling feet provided with tables are not intended
to correct for severe floor irregularities. The table is to be bolted to the floor.
2. For tables, carpeted floor may be used. However, to prevent pulling a "runner" in the
carpet when drilling holes for mounting, cut the carpet or burn a pilot hole with a large
tip soldering iron.
A construction grade 2 x 6, mounted flush or externally to the finished wall, with the top
surface equal to the minimum ceiling height will provide sufficient coverage for the upper rail
wall mount brackets. If no supporting board is used, the wall mount brackets must be lag
bolted to wooden wall studs for sufficient holding force. Each bolt must be capable of a
minimum of 500 pounds pull-out force.
TDS001A
Page 1 of 1
Technical Data Sheet
Models: S107/A3546 (mechanical lock)
S109/A3546-1 (electric lock)
WALLSTAND
This wallstand is used with a 17 x 17 inch grid cabinet or 17 x 17 inch bucky. The counter-
balanced column can be mounted either flush or offset from the wall at installation. The
wallstand is available in either mechanical or electric lock version. Specify right-hand or
left-hand load at time of order.
MOUNTING SPECIFICATIONS
Minimum ceiling height 86" from finished floor
Wall bracket mounting hole centers Four total, 85" from finished floor
Four wall anchors, each with a minimum See reference sheet for typical holding forces
pull-out force of 250 lbs. Two floor anchors, of various devices in common construction
with a minimum pullout force of 500 lbs. materials.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
TDS002B
Page 1 of 2
WALLSTAND TYPE OF DIMENSION
DRAWING
WALL
BRACKET
"A" "B" "C" "D"
FLUSH 10" 11" 0" 2 34"
S107/A3546/1525
S109/A3546-1/1525E OFFSET 11 38" 12 38" 1 38" 4 81"
FLOOR
PLATE "D"
DETAIL 1
4 2"
9"
C
L
4" 4" 4" 4" SHOWN AS
OFFSET MOUNT
*
PLANE OF
FILM
14 x 17
86" MINIMUM GRID CAB
CEILING 85"
HEIGHT
72-3/4"
MAXIMUM
"A"
"B"
"C
9-3/4"
MINIMUM
* ( 24 78" BUCKY
23" GRID CABINET
TDS002B
Page 2 of 2
Technical Data Sheet
Models S105/A3306/1550
FLOOR/WALL OR FLOOR/CEILING
TUBESTAND
This tubestand is specified as a wall mount or ceiling mount at time of order. Five
foot rails and electrical locks are standard. Options include eight or ten foot rails.
MOUNTING SPECIFICATIONS
Minimum ceiling height 89"
Ceiling mounting bolt locations Minimum 1 inch from rear wall
One inch and four inches below top of ceiling
Wall bracket mounting bolt locations. rail (minimum ceiling height), each with a
minimum pull-out force of 500 lbs.
At ends of five foot rail, approximately every
24 inches on other rails, each with a
Floor mounting bolt locations minimum pull-out force of 500 lbs.
ELECTRICAL (OPTION)
24 VDC, 2 Amp, from additional D164 power supply or 325 Generator.
SHIPPING INFORMATION
Contents Dimensions Weight
Accessory Carton 13 x 32 x 27 inches 55 lbs.
8 foot Rails 8 x 9 x 112 inches 68 lbs.
Column 8 x 9 x 86 inches 136 lbs.
Specifications subject to change without notice.
Page 1 of 2 TDS003
Rev. D
F/W - F/C TUBESTAND
DRAWING
S105/A3306/1550 TABLE B:
Tubear m Lengths
CEILING
46" F.S. TRAVEL W/ 5' RAILS
82" F.S. TRAVEL W/ 8' RAILS EXTENSION ARM
(OPTIONAL)
F.S.
89" MIN
121" MAX 6 38"
SEE
78"
TABLE
B
F.S.
Page 2 of 2 TDS003
Rev. D
Technical Data Sheet
Model S225
MOUNTING SPECIFICATIONS
Minimum ceiling height 92.5” wall mount or ceiling mount
Wall/Ceiling mounting bolt
specification Minimum pull-out force of 500 lbs. each
Floor mounting bolt location Minimum pull-out force of 500 lbs. each
ELECTRICAL
24 VDC, 2 Amp to come from D164 power supply (included) or generator.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Complete Column 97 x 43 x 8 inches 245 lbs.
Rails 8 x 9 x 96 inches 23 lbs.
TDS029 Rev. A
Page 1 of 2
`
ROTATING TUBESTAND WITH TRANSVERSE
S225
CL 90° 90°
360°
119.3"
82°
MAX
360°
92.2"
360° MIN 15°MAX
76.8"
MAX
28.6±5"
4.2"
MIN
TDS029 Rev. A
Page 2 of 2
Technical Data Sheet
Model S114
MOUNTING SPECIFICATIONS
Minimum ceiling height 91 1/4” wall mount or ceiling mount
Wall/Ceiling mounting bolt
specification Minimum pull-out force of 500 lbs. each
Floor mounting bolt location Minimum pull-out force of 500 lbs. each
ELECTRICAL
24 VDC, 2 Amp to come from D164 power supply (included) or generator.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Complete Column 97 x 43 x 8 inches 245 lbs.
Rails 8 x 9 x 96 inches 40 lbs.
Specifications subject to change without notice.
TDS032 Rev. B
Page 1 of 2
`
NON-ROTATING TUBESTAND WITH TRANSVERSE
S114
5 7/8"
MIN WALL TO BOLT
2"
32"
MAX
10"
MIN
120 1/4"
MAX
360°
91 1/8" 82°
MAX
MIN
15°
MAX
360
28 3/4±5"
73"
MAX 2 1/2"
MIN
3 1/2"
RAIL HEIGHT
15 5/8" MIN
TDS032 Rev. B
Page 2 of 2
TECHNICAL DATA
MODEL J309
Tube angulation ……..... ±120 deg with detents at zero and ±90
TUBE MOUNTING…... 6 inch diameter trunnion rings standard 6-3/4 inch diameter
trunnion rings optional
CONTROLS…………… LCD Display for Table Receptor SID, Table Top SID and
Tube Roll Angle.
Control buttons for Transverse Locks, Vertical Locks,
Longitudinal Locks, and All Locks.
SHIPPING INFORMATION
9 41"
FOCAL
SPOT 29 43"
19 21" 25 34"
24 41" 120°
120°
108"
9'-0" ROOM HT 60"
VERTICAL TRAVEL
78 41"
FOCAL
SPOT
FLOOR
18 41" 18 21"
TDS024
REV.B
Page 2 of 3
TECHNICAL DATA
MODELJ309
D MECHANICAL SPECIFICATIONS:
WEIGHT INSTALLED: 600 LBS
B DIMENSIONS IN INCHES:
A = 166.81 (STANDARD)
D A B = 190.81 (OPTIONAL)
D = 22 3/8
F = 49 7/8
D F
TDS024
REV.B
Page 3 of 3
Technical Data Sheet
Models S211/A4000/1465
ELEVATOR TABLE
This table has a 400 pound load rating. It comes with treadle operated electric locks and a flat,
floating top 84 x 30 inches in size. A 76-inch top is available as an option. The unit will pause at
an adjustable "working height" between the maximum and minimum elevation. The electrical
power panel can be removed from the base for convenient service access. The table top can only
be mounted by sliding it on from the end.
ELECTRICAL REQUIREMENTS
110 VAC, 60 Hertz, 6 Amp draw maximum
A 10 foot line cord with 110 VAC plug and strain reliefs are provided.
MOUNTING SPECIFICATIONS
The table mounts to the floor at the four corners.
Recommended holding force for each bolt (not provided) is 500 pounds.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Table top 3 x 33 x 87 inches 80 lbs
Table base 30 x 34 x 54 inches palleted 560 lbs
Page 1 of 2 TDS006
Rev. C
ELEVATOR TABLE
DRAWING
S211/A4000/1465
TABLE PEDESTAL
TABLE TOP
TOP VIEW (IN CENTERED POSITION)
C
L EXTENT OF TABLE TOP
MOTION
8.50
40" C
L
8.50
17"
116"
OPEN FLOOR
AREA FOR ELECTRICAL
JUNCTION BOX
SIDE VIEW
84"
48"
53"
Page 2 of 2 TDS006
Rev. C
Technical Data Sheet
Models S210/A5480/1415
ELECTRICAL REQUIREMENTS
110 VAC, 60 Hertz, 2 Amp draw maximum
A 12 foot line cord with 110 VAC plug and strain reliefs are provided.
MOUNTING SPECIFICATIONS
The table bolts to the floor at four places.
Recommended holding force for each bolt (not provided) is 500 pounds.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Table top 3 x 33 x 87 inches 80 lbs
Table base 30 x 31 x 54 inches 475 lbs.
TDS007
Rev. C
Page 1 of 2
4-WAY TABLE
DRAWING
S210/A5480/1415
C
L
C
L
TDS007
Rev. C
Page 2 of 2
Technical Data Sheet
Models S200/A5071/1445
MOUNTING SPECIFICATIONS
The table bolts to the floor in four places.
Recommended holding force for each bolt (not provided) is 500 pounds.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
TDS008
Rev. C
Page 1 of 2
FIXED TOP TABLE
ROOM LAYOUT
S200-24/A5071-24/1445-24
S200-30/A5071-30/1445-30
15" DIA.
HIGH VOLTAGE
TRANSFORMER
TABLE TOP
TOP VIEW
CL 30"
CL TABLE PEDESTAL
SIDE VIEW
FRONT VIEW
76" 30.00
4.25
55" 21.50"
TDS008
Rev. C
Page 2 of 2
Technical Data Sheet
Models S204/A5072
MOUNTING SPECIFICATIONS
The table bolts to the floor in four places.
Recommended holding force for each bolt (not provided) is 500 pounds.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Table base 37 x 32 x 78 inches 210 lbs.
TDS022 Rev. D
Page 1 of 2
ITT TABLE SYSTEM
68" TUBESTAND TRAVEL-
70" T.B. TRAVEL "ON" VERSION
"OFF" VERSION
(OFF VERSION) 60" TUBESTAND TRAVEL-
"ON" VERSION W/ AEC
F.S.
30"
7"
TABLE PEDESTAL
17" 76"
F.S. F.S.
F.S.
89"
50" GRID
CABINET
17"
TRAVEL
F.S.
32.5"
27"
14" MIN
23.5"
Ø15" HIGH VOLTAGE
38.5" TRANSFORMER
55"
90"
TDS022 Rev. D
Page 2 of 2
Technical Data Sheet
325 Models A300/B300/F280/K240
360 Models A360/B360
325/360 GENERATOR
This UL classified, 125 kVp, generator is a dependable, full-featured product designed for
convenience and safety. Line compensation, digital preread mAs display, digital timer with
built-in back-up circuit, programmable tube protection, and an integral 24 VAC/24 VDC supply
for collimation and locks are among the standard features. Options include automatic exposure
control.
SPACE REQUIREMENTS
Control 22-1/4" width, 12" depth, 46" height
Transformer 15" diameter, 23" height
Primary/Filament Cables 24’, rear access
(from control to HV transformer)
ELECTRICAL REQUIREMENTS
325 Model - 140 Amp maximum momentary current at 240 VAC
360 Model - 160 Amp maximum momentary current at 240 VAC
325 Model - Minimum rating of over-current protection & disconnect switch to be
70 Amps for operation at 240 VAC (100 Amps for operation at 208 VAC)
360 Model - Minimum rating of over-current protection & disconnect switch to be
100 Amps for operation at 208/240 VAC
Distribution transformer supplying power to the unit to be 37.5 kVA (minimum)
Recommended copper wire sizes are #2 for 50’ run, #00 for 100’ run, 250 mcm for 200’ run.
(“run” is distance between distribution transformer and disconnect switch)
Maximum acceptable line voltage drop under full load conditions is 5%.
24 VAC, 8 Amp and 24 VDC, 10 Amp supplies provided for collimator & locks
120 VAC, 2 Amp supply provided
SHIPPING INFORMATION
CONTENTS DIMENSIONS (on pallet) WEIGHT
Control & Transformer 60” width, 23” depth, 26” height 489 lbs.
TDS010
Page 1 of 2 REV. C
325 X-RAY CONTROL H.V. TRANSFORMER
DRAWING - +
B300/A2500/A300
B360/A360 CATHODE
OIL VENT ANODE
15" DIA.
TOP VIEW
22 41" SIDE VIEW
26"
12"
12"
10"
46"
36"
11"
TDS010
Page 2 of 2 REV. C
Technical Data Sheet
Models L500/L550
SPACE REQUIREMENTS
Power Module (H.T. transformer enclosed) 20.5" width, 17.5" depth, 37.5" height
Generator Console 17” width, 8.5” depth, 3” height
Communication Cables (2) 50’ standard, 1.5" conduit required
(from Console to Power Module)
Cable Access At power module rear, 24" above floor
ELECTRICAL REQUIREMENTS
200 Amps maximum momentary current at 240 VAC
Minimum rating of over-current protection & disconnect switch to be 100 Amps at 240 VAC
Distribution transformer supplying power to the unit to be 37.5 kVA (minimum)
Recommended copper wire sizes are #2 for 50’ run, #00 for 100’ run, 250 mcm for 200’ run.
(“run” is defined as distance between distribution transformer and disconnect switch)
Maximum allowable voltage drop under full load to be 5%.
Line voltages below 230 VAC require a step-up transformer at an additional charge.
24 VAC, 7 Amp and 24 VDC, 5 Amp supplies provided for collimator & locks
(There is no 110/120 VAC supply available from the generator)
SHIPPING INFORMATION
CONTENTS DIMENSIONS (on pallet) WEIGHT
Console & Power Module 32” width, 28” depth, 42” height 215 lbs.
TDS020 Rev. D
Page 1 of 2
Optional Pedestal
20 kHz
High Frequency
Generator
35.75"
16"
1" Clearance
for communications
cables
Top Side
Top 6.5"
12.5" 1.5" .75"
Operator Console
Cable
Entry/Exit
(all)
24"
htx htx
20.5" 17.5"
wide front to back
Power Module
TDS020 Rev. D
Page 2 of 2
Technical Data Sheet
Model S307-00/-01
Integrated Generator
Veterinary System
This fully-integrated table, tubestand, and generator system requires as little as 13 square feet
of floor space. Tube angulates with mechanical lock. Grid cabinet and tubestand easily
interlock for automatic alignment. Molded, rust-proof cassette tray.
SPECIFICATIONS
Column height: 86.0”
Space requirements Table top: 56” wide, 34” deep
Bolts to floor as desired. HV transformer sits on shelf in
Mounting table base.
All cables enter rear of table/control. Front cover of
Electrical access table base/control removes for internal access.
ELECTRICAL REQUIREMENTS
140 Amp maximum momentary at 240 VAC.
Maximum line voltage drop under full load conditions not to exceed 5%.
Minimum fusing for 300 mA is 70 Amp at 240 VAC, but 100 Amp is recommended.
Distribution transformer supplying power to be 37.5 kVA or greater.
Recommended copper wire sizes are #2 for 50’ run, #00 for 100’ run, 250 mcm for 200’ run
(run is distance between distribution transformer and service disconnect).
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Tubestand 8” x 8” x 86” 100 lbs
Table Base 65" x 40" x 35” palleted 90 lbs
Control, transformer,
x-ray tube 54” x 34” x 36” palleted 400 lbs.
TDS030 Rev. A
Page 1 of 2
INTEGRATED VETERINARY SYSTEM DRAWING
TDS030 Rev. A
Page 2 of 2
Technical Data Sheet
Model S307-02/-03
SPECIFICATIONS
Column height: 86.0”
Space requirements Table top: 56” wide, 34” deep
Bolts to floor as desired. HV transformer sits on shelf in
Mounting table base.
All cables enter rear of table/control. Front cover of
Electrical access table base/control removes for internal access.
ELECTRICAL REQUIREMENTS
240 VAC, single phase, 100 Amp disconnect, 200 Amp maximum momentary load.
37.5 kVA distribution transformer
Maximum line voltage drop under full load conditions not to exceed 5%.
Recommended copper wire sizes are #2 for 50’ run, #00 for 100’ run, 250 mcm for 200’ run.
(Run is distance between distribution transformer and service disconnect)
Line voltages below 230 VAC require a step-up transformer at an additional charge.
The generator provides 24 VAC and 24 VDC supply voltages for table locks and collimation.
SHIPPING INFORMATION
CONTENTS DIMENSIONS WEIGHT
Tubestand 8” x 8” x 86” 100 lbs.
Table Base 65" x 40" x 35” palleted 90 lbs
Control, transformer,
x-ray tube 54” x 34” x 36” palleted 400 lbs
TDS031 Rev. A
Page 1 of 2
HF INTEGRATED VETERINARY SYSTEM DRAWING
TDS031 Rev. A
Page 2 of 2