Professional Documents
Culture Documents
Distributed By:
Need assistance?
Euclid's position as the market leader provides you access to a comprehensive array of truck parts
products from the industry's leading manufacturers. Through Euclid, these entire product lines are
available to you just by placing a phone call to Euclid's S.O.S. Department.
The use in this catalog of the names of manufacturers and their product numbers and descriptions is for the assistance of our
customers in identifying replacement parts, some of which Euclid obtains from the original manufacturer and others of which are
made by its suppliers. "Extended Service" is a registered trademark of Eaton Corporation; "Q," "Q Plus," "T," and "Stopmaster"
are registered trademarks of ArvinMeritor; and "U" and "XtraLife" are registered trademarks of Dana Corporation. Other names
referenced in this catalog may be trademarks or trade names of manufacturers and suppliers other than Euclid Industries, LLC
and there is no affiliation between Euclid Industries, LLC and such manufacturers and suppliers. Euclid's policy is to provide the
best quality parts available and Euclid produces many of its own proprietary specifications and blueprints for this purpose.
Every effort has been made to insure the accuracy of the information shown in this catalog. However, Euclid Industries, LLC
assumes no liability for any errors or omissions of the information provided.
ii
Foundation Air Brake Parts 1
TABLE OF Air System Parts 2
CONTENTS
Brake Shoes and Friction Material 3
For additional parts and information, visit our online catalog at:
www.XpresswayPlus.com
If you have and comments, suggestions or catalog corrections, please e-mail us at:
catalogfeedback@arvinmeritor.com
XpresswayPlus.com
XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.
The following warranty applies to all Euclid Brand Products except remanufactured
air compressors, starters, alternators, and water pumps and some specialized
product lines (air springs, shock absorbers, manual and automatic slack adjusters,
air conditioning compressors and compressor clutches) that carry only the warranty
of the Original Equipment Manufacturer.
Euclid Industries, LLC warrants to Warehouse Distributor that all merchandise will be free from defects in
material and workmanship under normal and proper usage for a period of 2 years from the date of shipment
by Euclid Industries, LLC or 90 days from the date of sale by Warehouse Distributor, whichever is less. This
warranty does not cover and Euclid Industries, LLC makes no warranty with respect to (i) any merchandise
that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or
maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or
corrosive matter; and (ii) any merchandise, materials, parts or other components supplied by someone other
than Euclid Industries, LLC.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED OR OTHERWISE ARISING BY OPERATION OF LAW, TRADE, USAGE OR COURSE OF
DEALING, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Warehouse Distributor must provide Euclid Industries, LLC with written notice of any breach of the warranty
within 30 days after Warehouse Distributor discovers, or should have discovered, the alleged breach. Time is
of the essence, and Warehouse Distributor’s failure to provide such written notice to Euclid Industries, LLC
within this 30-day period will fully and completely release Euclid Industries, LLC from any obligation or
liability for that breach of warranty. This warranty extends only to Warehouse Distributor and to no other
persons.
No employee or agent of Euclid Industries, LLC is authorized to make any additional warranty or offer any
additional remedy, or to alter or vary the terms of the warranty or any disclaimers of warranties or limitations
of liability contained herein.
THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES AVAILABLE TO WAREHOUSE
DISTRIBUTOR SO THAT EUCLID INDUSTRIES, LLC’S CREDIT TO WAREHOUSE DISTRIBUTOR’S
ACCOUNT, REPAIR OR REPLACEMENT OF PARTS IS A FULFILLMENT OF ALL EUCLID INDUSTRIES,
LLC’S OBLIGATIONS. EUCLID INDUSTRIES, LLC IS NOT LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, NOR UNDER ANY CIRCUMSTANCES WILL EUCLID
INDUSTRIES, LLC BE LIABLE FOR DAMAGES BEYOND THE PRICE OF THE DEFECTIVE PARTS,
WHETHER IN CONTRACT, IN TORT OR UNDER ANY WARRANTY OR OTHER USE.
FOUNDATION
AIR BRAKE PARTS SECTION ONE
SECTION 1
INDEX
1-ii
SECTION 1
1
Exploded Views Page
1-iii
BENDIX "BRAZILIAN" 15" DIA. BRAKES
STEER AXLE BRAKE
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-7230 1-132
E-7231 1-83
E-7232 1-82
E-7235 1-190
UNLINED
C SHOE SIZE FMSI
E-7230 4" 4693
C
C
C
C
A
A, B
A, B
A
A Contained in Brake Kit E-7231
A
B Contained in Spring Kit E-7232
• Bendix 15" Steer Axle is the only dual web, single replaceable anchor pin design built prior to '95.
• Most common application is found on 1989-1991 Ford Bus & Cargo.
1-1
BENDIX "BRAZILIAN" 16 1/2" DIA. BRAKES
PAGE REFERENCE
TRUCK AND TRACTOR BRAKE EUCLID PAGE
NO. NO.
E-7236 1-134
E-7237 1-84
E-7238 1-85
UNLINED
SEE SLACK ADJUSTERS SHOE SIZE FMSI
IN SECTION 1
E-7236 7" 4515E
A
A
A
A, B
A,B
A
A A
1-2
DEXTER 12 1/4" "S" CAM AIR BRAKE
"PQ" STYLE BRAKE (After 5/96)
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-526 1-226
E-527 1-114
E-580 1-223
E-747 1-127
E-759 1-217
UNLINED E-807 1-216
SHOE SIZE FMSI E-1416A 1-221
E-1893 1-120
E-10876 4" 4700 E-2102 1-217
E-10877 5" 4661C E-2103 1-209
E-2395 1-108
E-10878 7 1/2" 4591 E-2396 1-109
E-2398 1-122
E-2404 1-225
E-2409 1-223
E-2469 1-187
E-2766 1-111
E-2767 1-127
E-10875 1-73
E-10876 1-130
E-10877 1-130
E-10878 1-130
E-526
E-526
E-2409
E-580 E-1416A
E-807 Bronze
E-759 Nylon
E-1416A
E-2404
SEE CAMSHAFT
E-2102 SECTION
E-2103
(Bushing Only)
E-2767
SEE SLACK ADJUSTERS
IN SECTION 1 E-2395 E-1893
E-2766
E-527
E-2396
E-747
1-3
DEXTER TRAILER AXLE WITH 12 1/4" DIA. BRAKES
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
E-526 1-226
E-580 1-223
E-759 1-217
E-807 1-216
E-1416A 1-221
E-2102 1-217
E-2103 1-209
E-2404 1-225
E-2409 1-223
E-2469 1-187
E-526
PAGE REFERENCE
BRAKE SHOES AND HARDWARE EUCLID PAGE EUCLID PAGE
NO. NO.
Before 4/93 NO. NO.
E-757 (Std.)
E-2398 (Heavy-Duty)
E-2399
E-527 UNLINED
E-2396 E-2395 (Std.) SHOE SIZE FMSI
E-3231 (1/8" Oversized)
E-9025 4" 4700
E-9026 5" 4661C
• Not interchangeable with other 12 1/4" Designs. Euclid recommends against replacing with
"Q" Style shoes.
1-4
DEXTER TRAILER AXLE WITH 16 1/2" DIA. BRAKES
CAMSHAFT, BUSHINGS AND BRACKET PARTS
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
SEE SLACK ADJUSTERS
E-526 1-226
IN SECTION 1 E-536 1-216
E-580 1-223
E-654 1-221
E-957 (Bolt-on) E-719 1-223
E-759 1-217
E-957 1-138
E-2102 1-217
E-2104 1-209
E-2287 1-207
E-654 E-580
E-526
PAGE REFERENCE
BRAKE SHOES AND HARDWARE EUCLID PAGE
NO. NO.
E-523 1-107
E-539 1-116
E-747 1-127
E-957 1-138
E-1893 1-120
E-1893 (Plain) E-2177 1-107
E-2766 1-111
E-8938 (Dimpled) E-2766 E-2767 1-127
E-2768 1-124
E-2769HD 1-95
E-2767 E-2769S 1-95
E-2769SHD 1-96
E-2778 1-137
E-3007A 1-116
E-3490B 1-124
E-8938 1-120
E-2768 (Std.)
E-3490B
(Heavy-Duty)
E-747
E-523 (Smooth)
E-2177
(Knurled) E-957 (Bolt-on)
UNLINED
SHOE SIZE FMSI
E-3007A or E-539
E-2778 7" 4515E
For Brake Repair Kit use
E-2769HD, E-2769S,
E-2769SHD • Interchangeable with Meritor "Q" Style shoes.
1-5
EATON 15" DIA. STANDARD &
"ES" "EXTENDED SERVICE" BRAKES
PAGE REFERENCE
STEER AXLE BRAKE EUCLID PAGE
NO. NO.
SINGLE WEB E-3234 1-225
E-3421A 1-108
E-4078 1-117
SEE SLACK ADJUSTERS E-5122 1-126
IN SECTION 1 E-5123 1-123
E-5124 1-117
E-5125 1-117
E-5126 1-132
E-3234 E-5127 1-215
E-5128 1-221
E-5138 E-5137 1-223
E-5138 1-223
E-5139 1-79
E-5140 1-190
E-5137 E-9027 1-132
E-5128
E-5127*
E-5127*
E-5128
E-3421A
E-5123
E-4078
E-3421A
E-5124
E-5125
UNLINED
SHOE SIZE FMSI SEE CAMSHAFT
Standard E-5122 E-5124 SECTION
E-5126 4" 1308 E-5125
"Extended Service"
E-9027 4" 1443TT
1-6
EATON 15" DIA.
"ES" "EXTENDED SERVICE" BRAKES 1
1-7
EATON 15" DIA.
"REDUCED ENVELOPE" BRAKES
PAGE REFERENCE
TRUCK AND TRACTOR BRAKE EUCLID PAGE
NO. NO.
E-536 1-216
E-580 1-223
E-1416 1-221
SEE SLACK ADJUSTERS E-1781 1-222
E-3234 IN SECTION 1 E-1782 1-222
E-2767 1-127
E-1781 E-3234 1-225
E-1782 E-5477 1-107
E-5478 1-116
E-5482 1-224
E-5501 1-193
E-580
E-9036 1-132
E-1416 E-9037 1-123
E-9038 1-123
E-536 E-9039 1-84
E-9140 1-132
E-9141 1-83
E-536
E-1416
E-2767
SEE CAMSHAFT SECTION
E-5482
E-5478
UNLINED
SHOE SIZE FMSI
E-9037
E-9140 6" 4716
E-9036 8 5/8" 4717
1-8
EATON 16 1/2" DIA.
541 SERIES BRAKES 1
PAGE REFERENCE
TRUCK AND TRACTOR BRAKE EUCLID PAGE
WITH CAST SPIDER NO. NO.
E-536 1-216
E-580 1-223
E-595 1-108
SEE SLACK ADJUSTERS IN SECTION 1 E-596A 1-109
E-1416 1-221
E-1418 1-126
E-3234 E-1428A 1-125
E-1428S 1-125
E-1781
E-1777 1-134
E-1782 E-1778 1-134
E-1781 1-222
E-1782 1-222
E-1887AHD 1-87
E-580 E-1887ASHD 1-88
E-2125 1-194
E-1416 E-2217A 1-108
E-536 E-2474 1-134
E-2475 1-125
E-2785 1-125
E-2807 1-141
E-2819 1-134
E-2820 1-88
E-3234 1-225
E-3801 1-89
E-9054 1-134
E-536 E-9509 1-134
E-2807
E-1416A
E-1428A E-2785
For Camshaft Repair Kit Heavy-Duty Optional for
use O.E.M. Std. Spindle Clearance
E-2125 Problems
E-595 (Plain)
E-2217A
STANDARD HIGH (Knurled)
MOUNT MOUNT
E-596A
UNLINED
SHOE SIZE FMSI
Shoe E-1778 Shoe E-2819 & Standard Mount
Use Spring E-2474 E-1777 6" 4317G
E-1428A Use Spring E-1778 7" 4311J
or E-2785 E-2475 E-9054 8 5/8" 4674
High Mount
• Upgrade to "ES II" with "ES II" Cam and "ES II" Kit. E-2474 5" 4223A
E-9509 6" 4317
E-2819 7" 4311J
1-9
EATON 16 1/2" DIA.
"ES" "EXTENDED SERVICE" BRAKES
PAGE REFERENCE
TRUCK AND TRACTOR BRAKE EUCLID PAGE
NO. NO.
WITH FABRICATED SPIDER E-536 1-216
E-539 1-116
E-580 1-223
E-1416 1-221
E-1418 1-126
E-1781 1-222
E-1782 1-222
E-3234 1-225
E-3234 E-5477 1-107
SEE SLACK ADJUSTERS E-5478 1-116
E-1781 E-5480 1-134
E-1782 IN SECTION 1 E-5481A 1-85
E-5482 1-224
E-5501 1-193
E-580
E-1416A
E-536
E-536
E-1416A
E-5482
E-10197
E-5477
E-5478
or
E-539
UNLINED
SHOE SIZE FMSI
E-5480 7" 4709
For Brake Repair Kit
use E-5481A
I.D. TIP
• Upgrade to "ES II" with "ES II" Cam and "ES II" Kit.
1-10
EATON 16 1/2" DIA.
"ES" "EXTENDED SERVICE" BRAKES 1
PAGE REFERENCE
E-1416
E-9042
E-536 (Nylon)
E-801
UNLINED
For Brake Repair Kit SHOE SIZE FMSI
use E-9049 (Fabricated) 7" 4708
E-9048 (Cast Shoes)
E-9052 (Fabricated Shoes)
1-11
EATON 16 1/2" DIA.
"ES II" "EXTENDED SERVICE" BRAKES
PAGE REFERENCE
E-5477
E-536
E-5482
CAST
E-5478 E-10197
E-5477 SEE CAMSHAFT
SECTION
UNLINED SHOE
SHOE SIZE FMSI
E-10270 5" 4719
E-10271 6" 4725
E-10272 7" 4709
E-10273 8 5/ 8" 4726
1-12
EATON 18" DIA.
SELF-CONTAINED TRACTOR BRAKES 1
PAGE REFERENCE
HEAVY-DUTY SERIES BRAKE EUCLID PAGE
NO. NO.
WITH CAST BRAKE SHOES
E-536 1-216
E-580 1-223
SEE SLACK ADJUSTERS E-1416 1-221
E-3234 IN SECTION 1 E-1781 1-222
E-1782 1-222
E-1781 E-2125 1-194
E-1782 E-2801 1-137
E-2802 1-109
E-2803 1-110
E-2804 1-126
E-580 E-2805 1-126
E-1416 E-2821 1-105
E-3234 1-225
E-536
E-536
E-1416
E-2805
E-2804
1-13
PARTS FOR EATON (SHULER) "C" & "E"...
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-03009 4-76
E-04000 4-77
E-540 4-58, 4-61,
4-62
E-572 4-58, 4-61,
4-62
OUTER CUP AND CONE INNER CUP AND CONE E-573 4-61, -62,-69
TMHM212011/ TM653/TM663(C) E-975 4-76
TMHM212049 TM653/TM665A(E)
E-03009
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
E-526 1-226
E-536 1-216
E-580 1-223
E-1385 1-218
E-1416 1-221
E-1569 1-226
E-2091 1-229
E-2494 1-186
E-3473 1-222
E-3473
E-2091
SEE SLACK ADJUSTERS
IN SECTION 1
1-14
. . . SERIES TRAILER AXLE WITH 12 1/4" DIA. BRAKES
SA SERIES 1
PAGE REFERENCE
ANCHOR PIN VARIATIONS EUCLID PAGE
NO. NO.
E-526 1-226
E-580 1-223
E-937 1-116
E-2126 1-74
E-3975 1-117
Available in E-2126
E-526 E-580 Brake Kit only E-3975 E-937
PAGE REFERENCE
Available in E-2126
Brake Kit only
E-1400
UNLINED
SHOE SIZE FMSI
E-1398 7 1/ 2" 4591
E-2208 (Std. Roller)
E-1406 (Oversize)
For Brake Repair Kit
use
E-2126
1-15
PARTS FOR EATON (SHULER) "C", "E" & "J"...
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-03009 4-76
OUTER CUP AND CONE INNER CUP AND CONE E-04000 4-77
HM212011/HM212049 653/663(C) E-540 4-58, 4-61, 4-62
653/665A(E) E-572 4-58, 4-61, 4-62
HM212010/HM218248(J) E-573 4-61, 4-62, 4-69
E-975 4-76
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
501 SERIES CAMSHAFT PARTS NO. NO.
E-526 1-226
E-536 1-216
SEE SLACK ADJUSTERS
E-580 1-223
IN SECTION 1 E-1385 1-218
E-1416 1-221
E-1416A 1-221
E-1565 1-223
E-1569 1-226
E-2089 1-196
E-2123 1-196
E-2405 1-222
E-2690A 1-219
E-2405 E-1416A E-1416A E-526 E-2695 1-218
E-2696A 1-196
E-1416 E-526
1-16
...SERIES TRAILER AXLE WITH 16 1/2" DIA. BRAKES
FTL SERIES DOUBLE ANCHOR PIN EUCLID
PAGE REFERENCE
PAGE EUCLID PAGE
1
NO. NO. NO. NO.
E-523 1-107 E-1893 1-120
E-539 1-116 E-2109 1-127
E-747 1-127 E-2177 1-107
E-801 1-115, 225 E-2241 1-136
E-1112A 1-106 E-8938 1-120
E-1113 1-118, 222
E-1880B 1-124, 125
Brake Shoe
not Available E-1893 (Plain)
E-8938 (Dimpled) E-1112A
E-801 E-801
UNLINED
SHOE SIZE FMSI
E-2241 7" 4515E
E-1113 E-1113
E-1880B
E-2109
E-747
E-539
Not Available
E-523 (Smooth)
E-2177 (Knurled)
PAGE REFERENCE
E-1428A
E-595 (Smooth)
E-2217A (Knurled)
E-10197
E-5477
E-596A
UNLINED
SHOE SIZE FMSI
E-1777 6" 4317G
For Brake Repair Kit E-1778 7" 4311J E-5478
use E-9054 8 5/8" 4674 or E-539 UNLINED
E-1887AHD or E-1887ASHD SHOE SIZE FMSI
E-5480 7" 4709
1-17
PARTS FOR EATON (SHULER) 22R, 23R, 22L, 23L
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
OUTER CUP AND CONE INNER CUP AND CONE E-03009 4-76
HM212011/HM212049 (22R) 653/665A (22R) E-04000 4-77
(22L) E-540 4-58, 4-61, 4-62
(22L) E-572 4-58, 4-61, 4-62
HM212011/HM212049 (23R) HM218210/HM218248 (23R) E-573 4-61, 4-62, 4-69
(23L) (23L) E-975 4-76
E-04000
E-03009
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
501 SERIES CAMSHAFT PARTS NO. NO.
E-526 1-226
E-536 1-216
SEE SLACK ADJUSTERS E-580 1-223
IN SECTION 1 E-1385 1-218
E-1416 1-221
E-1416A 1-221
E-1565 1-223
E-1569 1-226
E-2106 1-209
E-2123 1-196
E-2405 1-222
E-2690A 1-219
E-2695 1-218
E-2405 E-1416A E-1416A E-526 E-2696A 1-196
E-1416 E-526
1-18
...SERIES TRAILER AXLE WITH 16 1/2" DIA. BRAKES
FTL SERIES DOUBLE ANCHOR PIN EUCLID
PAGE REFERENCE
PAGE EUCLID PAGE
1
NO. NO. NO. NO.
E-523 1-107 E-1893 1-120
E-539 1-116 E-2109 1-127
E-747 1-127 E-2177 1-107
E-801 1-115, 225 E-2241 1-136
E-1112A 1-106 E-8938 1-120
E-1113 1-118, 222
E-1880B 1-124, 125
Brake Shoe
not Available E-1893 (Plain)
E-8938 (Dimpled) E-1112A
E-801 E-801
UNLINED
SHOE SIZE FMSI
E-2241 7" 4515E E-1113 E-1113
E-1880B
E-2109
E-747
E-539
Not Available
E-523 (Smooth)
E-2177 (Knurled)
PAGE REFERENCE
E-1428A
E-595 (Smooth)
E-2217A (Knurled)
E-10197
E-5477
E-596A
UNLINED
SHOE SIZE FMSI
1-19
EATON TOP SPEC "ES" RETROFIT FOR FRUEHAUF
16 1/2" DIA. "XEM" BRAKES
PAGE REFERENCE
E-2767
E-8938 (Dimpled) EUCLID PAGE
NO. NO.
E-3711 E-539 1-116
E-747 1-127
E-2177 1-107
E-2767 1-127
E-3711 1-111
E-8907 1-124
E-8922 1-134
E-8923 1-89
E-8938 1-120
E-747
E-8907
For Brake Repair Kit
use E-8923
E-5478 UNLINED
SHOE SIZE FMSI
E-747
E-5478 UNLINED
SHOE SIZE FMSI
E-8924 7" 4708
E-2177 (Knurled)
1-20
PARTS FOR FRUEHAUF "PRO-PAR"
TRAILER AXLE WITH 12 1/4" DIA. BRAKES 1
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-04000 4-77
E-04075 4-76
E-04075H 4-76
E-05500 4-77
E-1559 4-57
E-1561 4-57
E-2550 4-57
70 lb. Torque Spec.
E-05500
"O" Ring E-1559 INNER CUP AND CONE
OUTER CUP AND CONE
HM518410/HM518445
HM518410/HM518445
E-04000
I.D. TIP
• With Meritor Axle use E-04000V
vented plug. SEE WHEEL AND HUB PARTS SECTION
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
E-526 1-226
E-580 1-223
I.D. TIP E-1565 1-223
• Fruehauf 3" SEE SLACK ADJUSTERS E-1567 1-218
IN SECTION 1 E-1569 1-226
Center-to-Center E-1577A 1-218
E-2090 1-297
E-4587 1-212
3" Center-to-Center
E-4593 1-212
Available in
E-4593 only
A A
A A A
E-1577A
E-526
E-580
E-1565 E-1567 E-1565 E-1565
E-1567 A
E-1569
A A
E-4587
For Camshaft Support
A Bracket Assembly
use E-4593
1-21
PARTS FOR FRUEHAUF "PRO-PAR"
TRAILER AXLE WITH 12 1/4" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN HARDWARE EUCLID PAGE
NO. NO.
Available in E-2286 E-801 1-115, 225
Brake Kit only E-920 1-120
E-920 E-1112A 1-106
E-1113 1-118, 222
E-1893 1-120
E-2286 1-74
E-8938 1-120
PAGE REFERENCE
SHOES, ROLLER AND SPRING EUCLID PAGE
NO. NO.
E-747 1-127
E-1580 1-130
E-1581 1-116
E-1582 1-107
E-1583 1-122
E-747
E-1583
UNLINED
SHOE SIZE FMSI
E-747
E-1580 8" 4649
E-1581
• Not interchangeable with
E-1582
non Fruehauf Shoes
1-22
PARTS FOR FRUEHAUF "PRO-PAR"
TRAILER AXLE WITH 16 1/2" DIA. BRAKES 1
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-04000 4-77
E-04075 4-76
E-04075H 4-76
E-05500 4-77
E-1559 4-57
E-1561 4-57
E-2550 4-57
E-05500
"O" Ring E-1559 INNER CUP AND CONE
OUTER CUP AND CONE HM518410/HM518445
HM518410/HM518445
E-04000
PAGE REFERENCE
A A A
E-1577A
E-526
E-580
E-1565 E-1567 E-1567 E-1565 E-1565
• White must go to outside. E-1569 A
• Yellow is vented. Grease vents away
from shoe.
A
OLD STYLE
E-4587
E-1571
SEE CAMSHAFT SECTION
1-23
PARTS FOR FRUEHAUF "PRO-PAR"
TRAILER AXLE WITH 16 1/2" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN HARDWARE EUCLID NO. PAGE NO.
NEW "XEM" ANCHOR PIN HARDWARE STD. ANCHOR PIN HARDWARE KIT-5 1-93
E-801 1-115, 225
E-920 1-120
E-1113 E-1112A E-1113 E-1112A 1-106
E-1113 1-118, 222
E-1893 (Plain) E-801 E-1816HD 1-104
E-8938 (Dimpled) E-3711 E-1816S 1-103
E-1893 (Plain) E-801 E-1816SHD 1-103
E-1893 1-120
E-8938 (Dimpled) E-2121 1-90
E-2121HD 1-90
E-2773 1-111
E-2778 1-137
E-3710HD 1-91
E-3710S 1-92
E-3710SHD 1-92
E-3711 1-111
E-3895S 1-101
E-3895SHD 1-102
E-4880S 1-91
E-4880SHD 1-91
For Brake Repair Kit E-6999S 1-96
E-6999SHD 1-97
use E-3710HD, E-3710S For Brake Repair Kit E-8938 1-120
E-3710SHD, E-3895S, E-3895SHD, use E-1816HD, E-1816S, E-9061 1-111
E-6999S, E-6999SHD E-9142 1-93
E-1816SHD
OLD STYLE "XEM" BRAKE ECCENTRIC ANCHOR PIN BRAKE OLD STYLE ANCHOR PIN BRAKE
Uses Meritor "Q" Style Shoes
Available in E-920 Available in
E-920 E-920 Available in
Kit Only Kit Only
E-2773 Kit Only E-9061 E-609
Use E-2778
Brake Shoe
Use Brake Repair Kit E-4880S, Use Brake Repair Kit KIT-5,
E-4880SHD Use Brake Repair Kit E-9142 E-2121 or E-2121HD
PAGE REFERENCE
SHOES, ROLLERS, SPRING & DUST SHIELD EUCLID PAGE
NO. NO.
STD. BRAKE "XEM" BRAKE
E-2767 E-523 1-107
UNLINED E-539 1-116
E-545A 1-124
SHOE SIZE FMSI E-747 1-127
E-886 1-140
E-2685 7" 4515E E-1880B 1-124, 125
E-2177 1-107
E-2685 1-135
E-2767 1-127
E-3227 1-116
E-3228 1-124
E-3490B 1-124
E-3713 1-135
E-886 (Steel) E-3714 1-135
E-3775 (Plastic) E-3775 1-140
E-3920 1-135
E-747
E-747
E-3228 (Std.)
E-3490B OFFSET 16 1/2" x 8 5/8"
(Heavy-Duty)
E-545A (Std.)
E-1880B E-747
(Heavy-Duty)
E-539
E-747
E-3227
UNLINED
SHOE SIZE FMSI E-3713 LH "XEM" E-3714 RH "XEM"
E-523 (Plain) E-523 (Plain)
E-2177 (Knurled) E-3920 7" 4515E FMSI 4551E
E-2177 (Knurled)
1-24
PARTS FOR HENDRICKSON INTRAAX TRAILER AXLE ®
E-2767
E-1893 (Plain)
E-8938 (Dimpled)
E-2766
E-2128
E-7663
E-1251
E-3490B
E-3007B or
E-539
E-747
E-2177
1-25
PARTS FOR HENDRICKSON INTRAAX® TRAILER AXLE
WITH 16 1/2" DIA. BRAKES
PAGE REFERENCE
E-4736
E-1113
SEE SLACK
E-1318AHD ADJUSTER SECTION
(IMPROVED
VERSION)
E-1318A
(O.E. STYLE)
E-2720
E-11449
E-719
(for 2" O.D.)
E-1416
E-807
E-1416 E-11451 (for 2" O.D.)
PAGE REFERENCE
1-26
MERITOR AIR DISC BRAKES
1
I.D. TIP
• Rotor diameter identifies
the brake series.
1-27
MERITOR 12 1/4" DIA. "Q" BRAKES
PAGE REFERENCE
TRAILER AXLE BRAKE EUCLID PAGE
NO. NO.
E-527 1-114
E-747 1-127
E-801 1-115, 225
E-1113 1-118, 222
E-1318A 1-211
E-1318AHD 1-211
E-1569 1-226
E-1893 1-120
E-2405 1-222
E-2406 1-221
E-2407 1-219
E-2408 1-218
E-2411A 1-223
E-2766 1-111
E-2767 1-127
UNLINED E-3481A 1-122
SHOE SIZE FMSI E-3482 1-109
E-3483 1-108
E-3491 7 1/2" 4670 E-3484 1-74
E-3491 1-130
E-3520A 1-202
E-3520AHD 1-203
E-2767 E-5093 1-225
E-8938 1-120
E-1318AHD (Improved
E-1893 (Plain) Version)
E-8938 (Dimpled) E-1318A (O.E. Style)
E-2766 E-801 or
E-5093
E-1113
E-2411A
E-2406 E-747
E-2408
E-1569
E-2407
E-2405
E-2411A
E-3481A
E-747 E-527
E-3483
E-527
For Brake Repair Kit
use
E-3484
1-28
MERITOR COACH 14 1/2" x 4" & 6" "W" SERIES
STEER AXLE BRAKE
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-654 1-221
E-667 1-216
E-801 1-115, 225
E-3479 1-223
E-4736 1-226
E-10811 1-127
E-10812 1-107
E-10813 1-119
E-10814 1-112
E-10816 1-117*
E-10817 1-118
E-10818 1-122
E-10845 1-223
* Not Sold Separately
E-10845
or
E-3479
E-10818
E-4736 E-10817
E-10816*
E-10815*
E-3479
E-654 E-801
E-667
E-654 E-10814
SEE SLACK ADJUSTERS E-10843 E-801
IN SECTION 1
E-667
E-10812
E-10811
E-10813
UNLINED
SHOE SIZE FMSI
E-10802 4" 4227G
E-10803 6" 4228B
1-29
MERITOR 14 1/2" x 5" "W" SERIES
PAGE REFERENCE
E-654 1-221
E-667 1-216
E-3479 1-223
E-4736 1-226
E-10811 1-127
E-10812 1-107
E-10813 1-119
E-10814 1-112
E-10816 1-117*
E-10817 1-118
E-10818 1-122
E-10819 1-115
E-10820 1-112
E-10847 1-136
E-10845
or
E-3479
E-654
E-667
E-10821
E-10817 E-10818
E-10820 E-10819
E-10816*
E-10815*
E-654
E-10843
E-667
E-10813
E-10812
E-10813
UNLINED
SHOE SIZE FMSI
E-10804 5" 4398B
1-30
MERITOR 14 1/2" x 8" & 10" "W" SERIES
PAGE REFERENCE
1
DRIVE AXLE COACH BRAKE - TYPE 1 EUCLID
NO.
PAGE
NO.
E-667 1-216
E-1835 4-7
I.D. TIP E-3479 1-223
E-4961A 1-116, 4-7
• Spring unique to Meritor E-10813 1-119
E-10817 1-118
14 1/2" x 8" & 10" Brake E-10823 1-108
E-10824 1-108
E-10825 1-113
E-10826 1-122
UNLINED E-10829 1-115
SHOE SIZE FMSI E-10843 1-224
E-10845 1-223
E-10805 8" 4541B E-10848 1-221
E-10810 10" 4592A E-10849 1-222
E-10851 1-222
E-10853*
E-10852*
E-10851 E-10843
E-10826
E-1835
E-10848
E-10817
E-667 (see below)
E-10825
* E-10813
E-10829
E-10828
E-10849 E-4961A
SEE SLACK ADJUSTERS
IN SECTION 1
E-667
E-10848
E-10845
E-3479
8" Shoe
use
E-10867
* PART
NUMBERS
E-5095
THICKNESS
1/32"
E-1113 1/16"
10" Shoe E-10869
E-10831 3/32"
E-10832 1/8"
E-10833 5/32"
For Camshaft Repair Kit
use
E-10868
1-31
MERITOR 14 1/2" x 10" "W" SERIES
PAGE REFERENCE
E-10853*
Washer on Outer
E-10852* Side of Web
E-10851 E-10857
E-667
E-10837
E-10836
E-10835
E-10834
SEE SLACK ADJUSTERS
IN SECTION 1
E-667
E-654
E-10838 E-10843
E-10839
E-10839
1-32
MERITOR 14 1/2" x 10" "W" SERIES
1
PAGE REFERENCE
EUCLID PAGE
DRIVE AXLE COACH BRAKE - TYPE 3 NO. NO.
E-654 1-221
E-667 1-216
E-1835 4-7
E-3479 1-223
E-4736 1-226
E-4961A 1-116, 4-7
E-10813 1-119
UNLINED E-10822 1-127
SHOE SIZE FMSI E-10824 1-108
E-10825 1-113
E-10810 10" 4592A E-10826 1-122
E-10828 1-121
E-10829 1-115
E-10833 1-118
E-10842 1-118
E-10843 1-224
E-10846 1-188
E-10847 1-136
Washer on Inner E-10857 1-224
Side of Web E-10865 1-118
E-4736
E-10845
E-3479 E-10826
E-1835
E-654
E-10842
E-667
E-10833 E-10813
E-10825
E-10829
E-10828
E-10865
E-4961A
E-667
E-654
E-10843
E-10857
1-33
MERITOR 15" DIA. "Q" BRAKES
PAGE REFERENCE
STEER AXLE BRAKE EUCLID PAGE
E-9076 NO. NO.
E-2522 1-253
SEE SLACK ADJUSTERS E-3421A 1-108
IN SECTION 1 E-3476 1-223
E-3869 1-80
E-3870 1-113
E-3871 1-115
E-3872 1-123
E-3873 1-126
E-3874 1-118
E-3876 1-192
E-3877 1-215
E-3476 E-3878 1-221
E-4961A 1-116, 4-7
E-5528 1-133
E-7899 1-81
E-9076 1-225
E-3878
E-3877
E-3877
E-3878
E-3476
SEE CAMSHAFT
SECTION
E-4961A
E-3874
UNLINED
SHOE SIZE FMSI
E-5528 4" 1308T
E-3871
E-2522
E-3870
E-3872
E-3421A
E-3421A
• Q Plus shoes cannot be used E-3873
on this application
E-2522
1-34
MERITOR 15" DIA. "Q PLUS" BRAKES
PAGE REFERENCE
1
STEER AXLE BRAKE EUCLID
NO.
PAGE
NO.
E-539 1-116
E-654 1-221
E-747 1-127
E-1893 1-120
E-2177 1-107
E-2766 1-111
E-2767 1-127
E-3007A 1-116
E-3478 1-224
E-3479 1-223
E-3859 1-222
E-3993B 1-194
E-5093 1-225
E-5512 1-216
E-5513 1-204
E-8938 1-120
E-9062 1-133
E-9063 1-123
E-9064 1-80
E-5093
E-3479
E-2767
E-1893 (Plain)
E-3479 E-8938 (Dimpled)
E-654 E-2766
E-5512
SEE SLACK
ADJUSTERS
IN SECTION 1
E-2177 E-9063
E-3007A or
E-539 E-747
E-3859 UNLINED
SHOE SIZE FMSI
E-9062 4" 4702
E-5512
E-3478
1-35
MERITOR "T" SERIES 15" DIA. BRAKES
PAGE REFERENCE
STEER AXLE BRAKE EUCLID PAGE
WITH 1 1/2" DIA. CAMSHAFT NO. NO.
UNLINED
SHOE SIZE FMSI
E-801
E-3438 15" x 3 1/2" 1307
E-3437 E-3439 15" x 4" 1308
E-3421A
PAGE REFERENCE
WITH 1 1/4" DIA. CAMSHAFT
EUCLID PAGE
SEE SLACK ADJUSTERS NO. NO.
IN SECTION 1 E-3446 1-191
E-3447 1-215
E-5093 E-3469 1-221
E-3471 1-223
E-3474 1-222
E-3475 1-223
E-3476 1-223
E-5093 1-225
E-3475
E-3471
E-3476
E-3469
E-3469
E-3471
E-3447
E-3447 E-3474
For Camshaft Repair Kit
use E-3446
SEE CAMSHAFT SECTION
1-36
MERITOR "T" SERIES 16 1/4" DIA. BRAKES
STEER AXLE BRAKE
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-580 1-223
E-581 1-223
E-654 1-221
E-1106 1-113
E-2522 1-253
E-3421A 1-108
E-3437 1-123
E-3441 1-134
E-3445 1-113
E-3468A 1-195
SEE SLACK ADJUSTERS E-3472 1-223
E-4692 1-84
IN SECTION 1 E-4736 1-226
E-5512 1-216
E-4736
E-5512
E-654
UNLINED
SHOE SIZE FMSI
E-3441 3 1/2" 4561
Available in E-4692
Brake Kit Only
E-3437
E-3421A
E-2522
E-1106
1-37
MERITOR 16 1/2" DIA. "Q" AND "P" BRAKES
PAGE REFERENCE
TRUCK AND TRACTOR BRAKE EUCLID PAGE
NO. NO.
For "Q" Brake Repair Kit use E-523 1-107
E-539 1-116
"Q" BRAKE E-2769HD, E-2769S, E-2769SHD, E-545A
E-654
1-124
1-221
E-3895S, E-3895SHD, E-6999S, E-747 1-127
E-6999SHD, E-801 1-115, 225
E-1112A 1-106
E-1113 1-118, 222
E-1816HD 1-104
E-5093
For "Q" Brake Camshaft E-1816S 1-103
Repair Kit use E-3993B or E-1816SHD 1-103
E-3479 E-5513 (Bushing & Seal Kit Only) E-1880B 1-124, 125
E-1893 1-120
E-3479 E-2086B 1-195
E-654 E-2177 1-107
E-2241 1-136
E-2684 1-136
E-5512 E-2686 1-135
E-2687 1-135
E-2766 1-111
E-2767 1-127
E-2767 E-2768 1-124
E-2769HD 1-95
SEE SLACK ADJUSTERS E-2769S 1-95
IN SECTION 1 E-2769SHD 1-96
E-2778 1-137
E-3007A 1-116
E-3303 1-136
E-3304 1-136
E-3859 E-3478 1-224
E-3479 1-223
E-3490B 1-124
E-3859 1-222
E-2766 E-3895S 1-101
E-3895SHD 1-102
E-3993B 1-194
E-5093 1-225
E-5512 1-216
E-5513 1-204
"P" BRAKE E-6999S 1-96
E-1893 (Plain) E-6999SHD 1-97
E-8938 1-120
UNLINED SIZE FMSI E-8938 (Dimpled)
SHOE
DRIVE AXLE E-2684 6" 4514G
E-2241 7" 4515E E-5512
STEERING AXLE E-2686 4" 4549C
E-2687 5" 4524B E-654
E-3479
E-3478
E-1893 (Plain)
E-8938 (Dimpled)
E-801 SEE CAMSHAFT SECTION
E-1113
E-1112A
E-801
E-2768 (Std.)
E-1113 E-2177 E-3490B (Heavy-Duty)
E-545A (Std.) (Knurled)
E-1880B (Heavy-Duty)
E-3007A or E-747
E-747 E-539
E-523 (Smooth)
E-2177 (Knurled)
E-539
1-38
MERITOR 16 1/2" DIA. "Q PLUS" BRAKES
TRUCK AND TRACTOR BRAKE
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-539 1-116
E-654 1-221
E-747 1-127
E-1893 1-120
E-2177 1-107
E-2766 1-111
E-2767 1-127
E-2769HD 1-95
E-2769S 1-95
E-2769SHD 1-96
E-3007A 1-116
E-3490B 1-124
E-3478 1-224
E-3479 1-223
E-3859 1-222
E-3895S 1-101
E-3895SHD 1-102
E-3993B 1-194
E-5093 1-225
E-5503 1-136
E-5512 1-216
E-5513 1-204
E-6999S 1-96
E-6999SHD 1-97
E-2767 E-8938 1-120
E-1893 (Plain)
E-8938 (Dimpled)
E-5093
E-3479 E-2766
E-3479
E-654 E-2177 E-3490B
E-5512
E-747
SEE SLACK
ADJUSTERS
IN SECTION 1
E-3007A
or E-539
UNLINED
SHOE SIZE FMSI
E-5503 7" 4707
E-10844 8 5/8" 4711
E-3859 E-10847 6" 4715
E-10850 8" 4718
E-10854 5" 4720
E-5512
E-654
E-3479
E-3478
SEE CAMSHAFT
SECTION
1-39
MERITOR 16 1/2" DIA. "Q" AND "P" BRAKES
PAGE REFERENCE
E-2522
E-3824 (5" Shoe)
E-3490B (7" Shoe)
E-747
E-2672 (Plain)
E-3914 (Knurled) Available in E-5086
Brake Kit Only
E-530
E-961 E-3007A
E-714
E-1307 or
E-530 E-539
E-5093 E-961
E-752
UNLINED
SHOE SIZE FMSI
STEERING AXLE E-3823 5" 4524B
DRIVE AXLE E-5092 7" 4515H
Washers and
Seals Available E-5093
in E-2676
Brake Kit Only
For Brake Repair Kit use For Camshaft Repair Kit
E-3858 (5" Shoe) use
E-5086 (7" Shoe) E-2086B
For Brake Repair Kit
use E-2676
1-40
MERITOR "Q PLUS" SERIES CAM BRAKES FOR 15" &
16 1/2" MX500 LONG LIFE & LX500 EXTENDED LUBE 1
1-41
MERITOR "Q PLUS" SERIES CAM BRAKES FOR 15" &
16 1/2" MX500 LONG LIFE & LX500 EXTENDED LUBE
1-42
MERITOR 18" DIA. CAST BRAKES
TRUCK AND TRACTOR BRAKE
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
E-502 1-112
E-543 1-125, 126
E-579A 1-117
E-654 1-221
E-801 1-115, 225
E-1269 1-114
E-2218 1-119
E-3478 1-224
E-3479 1-223
E-3511 1-107
E-3512 1-125
E-3513 1-127
E-3518 1-105
E-3859 1-222
SEE SLACK ADJUSTERS E-3992 1-105
IN SECTION 1 E-3993B 1-194
E-4902 1-137
E-5093 1-225
E-5512 1-216
E-5093
E-3479
E-3479
E-654
E-5512
E-919
E-579A
E-3859
E-801
E-1269
E-502
E-1269
E-801
E-5512
E-654
OLD STYLE SPRING E-3479
E-3478
E-543
E-3513 E-3512
E-2218
E-3511
E-2218
UNLINED
For Camshaft Repair Kit SHOE SIZE FMSI
use
E-4902 7" 4471B
E-3993B
1-43
MERITOR EARLY MODEL TRAILER AXLES
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS
EUCLID PAGE
OUTER CUP AND CONE INNER CUP AND CONE NO. NO.
HM212011/HM212049 (RL) 653/665A (RL) E-03009 4-76
HM212011/HM212049 (RN) HM218210/HM218248 (RN) E-04000 4-77
E-540 4-58, 61, 62
E-572 4-58, 61, 62
E-573 4-61, 62, 69
E-975 4-76
E-1251 4-58, 59
E-1252 4-58
E-1253 4-58, 59
E-2128 4-58, 59
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
4" x 6" (RQ, RN, RL) AXLE WITH 1 1/2" DIA. CAMSHAFTS E-526 1-226
E-536 1-216
E-564 1-223
SEE SLACK ADJUSTER E-580 1-223
SECTION 1 E-654 1-221
E-759 1-217
E-801 1-115, 225
E-1113 1-118, 222
E-1271 1-216
E-1272 1-221
E-1318AHD E-1318A 1-211
E-1318AHD 1-211
(Heavy-Duty E-1319A 1-209
Version) E-1416 1-221
E-1318A E-1569 1-226
(O.E. Style) E-2088AHD 1-200
E-1416 E-526 E-2361 1-217
E-564 E-526
E-2380 1-219
E-2405 1-222
E-2406 1-221
E-2407 1-219
E-2408 1-218
E-564 E-1271 E-1272 E-2411A 1-223
E-2380 E-564 E-564 E-2690A 1-219
E-2361 E-3520A 1-202
E-1319A E-3520AHD 1-203
ALTERNATE SPIDER BUSHING Used in E-3989AHD 1-204
E-1318A Only E-3991 1-222
E-5093 1-225
4000 - 6000 SERIES - 4" x 6" (RQ, RN, RL) AXLE WITH 1 5/8" DIA. CAMSHAFTS
SEE SLACK
E-1318AHD ADJUSTERS
(Heavy-Duty
Version) IN SECTION 1
E-1318A
(O.E. Style)
E-2405 E-2411A E-1569 E-1113 E-801 or
E-5093
E-2411A
1-44
MERITOR EARLY MODEL TRAILER AXLES
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE 1
NO. NO.
5" RD. (TK, TKL) AXLE WITH 1 1/2" DIA. CAMSHAFTS
E-526 1-226
E-535 1-218
SEE SLACK ADJUSTERS E-536 1-216
IN SECTION 1 E-564 1-223
E-580 1-223
E-581 1-223
E-603 1-209
E-654 1-221
E-656 1-225
E-759 1-217
E-801 1-115, 225
E-943 1-216
E-1113 1-118, 222
E-1271 1-216
E-1272 1-221
E-580 E-526 E-1318A 1-211
E-1318AHD 1-211
E-1357A 1-200
E-1416 1-221
E-1569 1-226
E-2088AHD 1-200
E-526 E-2361 1-217
E-656 WHITE E-943 YELLOW* E-603 E-535 E-580 E-581 E-2380 1-219
E-2405 1-222
ALTERNATE SPIDER BUSHING E-2406 1-221
E-2407 1-219
E-2408 1-218
E-2411A 1-223
For Camshaft Repair Kit E-2477B 1-209
SEE CAMSHAFT SECTION E-2551 1-215
use E-1357A (Std.) or E-2679AHD 1-202
E-1272 E-2551 E-654 *Yellow vents away from shoe. E-2679AHD (with E-1318AHD) E-2690A 1-219
E-3520A 1-202
E-3520AHD 1-203
5" RD. (TK, TKL) AXLE WITH 1 1/2" DIA. CAMSHAFTS E-3989AHD 1-204
E-3991 1-222
E-1318AHD
(Heavy-Duty
Version)
E-1318A
E-564 (O.E. Style) E-526
E-1416 E-564 E-526
ALIGN NOTCH
WITH GREASE
FITTING ON
SPIDER
E-1271 E-1272 E-2361 E-564 E-564
ALTERNATE SPIDER BUSHING E-2380
Used in
E-1318A Only E-2477B
E-1318AHD
(Heavy-Duty
Version)
E-1318A
(O.E. Style) E-1113 E-801
E-2405 E-2411A E-1569
E-2411A
1-45
MERITOR TN, TP, TQ AND TR TRAILER AXLES
PAGE REFERENCE
TN, TQ 2 5/8" SPINDLE - "MANUAL AND POSITIVE" ADJUSTMENT EUCLID PAGE
SPINDLE NUTS NO. NO.
E-540 4-58, 61, 62
OUTER CUP AND CONE INNER CUP AND CONE E-572 4-58, 61, 62
"MANUAL" HM212011/HM212049 HM218210/HM218248 E-975 4-76
HM218210/HM218248 E-1251 4-58, 59
"POSITIVE" 1228-M-403/N-404 E-1253 4-58, 59
E-1559 4-57
E-1561 4-57
E-2128 4-58, 59
E-2303 4-60, 70, 74
E-2305 4-60, 70, 74
E-2550 4-57
E-3008 4-58
E-7658 4-60
E-7659 4-60
E-7660 4-60
E-572 E-3008 E-540 E-7663 4-59
E-7664 4-59
E-7665 4-59
SEE WHEEL AND HUB PARTS SECTION E-7666 4-59
1-46
MERITOR TN, TP, TQ AND TR TRAILER AXLES
CURRENT DESIGN FABRICATED SPIDER
WITH BOLT-ON METAL BUSHING
PAGE REFERENCE
EUCLID PAGE
NO.
1
NO.
SEE SLACK ADJUSTERS E-526 1-226
IN SECTION 1 E-564 1-223
E-1113 1-118, 222
E-1271 1-216
E-1272 1-221
E-1319A E-1318A 1-211
E-6076 E-1318AHD 1-211
E-1318AHD E-1319A 1-209
(Heavy-Duty E-1416 1-221
Version) E-2088AHD 1-200
E-2405 E-2361 E-1318A E-2361 1-217
E-2380 1-219
Used in (O.E. Style) E-1113 E-2405 1-222
E-6077 E-2405 E-1318A Only E-5093 E-2411A 1-223
E-4736 1-226
E-5093 1-225
E-6076 1-219
E-6077 1-224
E-6080 1-218
NEW DESIGN HAS REPLACEABLE E-564 E-9072 1-223
BUSHING. E-9072 E-9077 For Camshaft E-9073 1-225
Repair Kit E-9075 1-224
CURRENT DESIGN FABRICATED SPIDER. E-9077 1-226
USES BOLT-ON METAL BUSHING.
use E-9079HD E-9078HD 1-205
CAMSHAFT HAS 2 5/64" HEAT-TREATED SEE CAMSHAFT SECTION (with E-9079HD 1-206
E-9783 1-219
UPPER BEARING JOURNAL. 2 5/64" E-1318AHD) E-9784 1-219
E-1319A
E-1318AHD
(Heavy-Duty
E-6080 E-2361 Version)
Used in E-1318A
E-2411A or E-9073 E-2405 E-9075 E-1318A Only (O.E. Style) E-1113
E-5093
or
E-9783
or E-9784 E-2405
HAS WELDED SPIDER BUSHING E-9077
RETAINER. WHEN USING PRESS-IN METAL BUSHING E-564
METAL BUSHING, USE HEAT-
TREATED CAMSHAFT WITH 2 5/64"
UPPER BEARING JOURNAL AND For Camshaft Repair Kit
SPECIAL SPACER WASHER 2 5/64" SEE CAMSHAFT SECTION
use E-9078HD
(E-9075). (with E-1318AHD)
E-1319A
E-1318AHD
(Heavy-Duty
Version)
E-1271 E-2361 E-1318A
E-1416 E-2380 Used in (O.E. Style)
E-1318A Only E-564 E-4736
E-564
E-9783
or E-9784
E-1272 E-564 E-526 E-564
HAS WELDED SPIDER BUSHING
RETAINER. CAMSHAFTS HAVE
1 25/32" UPPER BEARING JOURNAL.
For Camshaft Repair Kit
SPACER WASHER NOT REQUIRED. SEE CAMSHAFT SECTION use E-3520AHD
1 25/32" (with E-1318AHD)
1-47
MERITOR TRAILER AXLES WITH 16 1/2" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN VARIATIONS EUCLID PAGE
NO. NO.
"Q", "Q PLUS", "Q" FOR FRUEHAUF BRAKES "P" BRAKE E-1113 KIT-4HD 1-98
E-1113 KIT-4S 1-99
E-801 E- KIT-4SHD 1-99
801 E-502 1-112
E-801 1-115, 225
E-1893 (Plain) E-1112A 1-106
E-8938 (Dimpled) E-1893 (Plain)
E-2766 E-8938 (Dimpled) E-1112A E-1113 1-118, 222
E-1816HD 1-104
E-1816S 1-103
E-1816SHD 1-103
E-1893 1-120
E-2119 1-112
E-2766 1-111
E-2769HD 1-95
E-2769S 1-95
E-2769SHD 1-96
E-3895S 1-101
E-3895SHD 1-102
E-6999S 1-96
E-6999SHD 1-97
E-8938 1-120
For Brake Repair Kit use E-2769HD, For Brake Repair Kit
E-2769S, E-2769SHD, E-2769SHD-R, E-3895S, use E-1816S,
E-3895SHD, E-6999S, or E-6999SHD E-1816HD or E-1816SHD
EARLY MODEL "P" BRAKE Note: When using cast shoes or pressed
E-579A E-512 E-1269 - Seal steel shoes with bushings, use:
E-801
E-801
E-2119
PAGE REFERENCE
SHOES, ROLLERS, SPRING & DUST SHIELD EUCLID PAGE
NO. NO.
"P" BRAKE "Q" AND "Q PLUS" E-523 1-107
E-539 1-116
BRAKE E-545A 1-124
E-747 1-127
E-886 1-140
E-1880B 1-124, 125
E-2177 1-107
E-2241 1-136
E-2684 1-136
E-2767 1-127
E-2768 1-124
E-2778 1-137
E-3007A 1-116
E-3304 1-136
E-3417 1-136
E-2767 E-3490B 1-124
E-747 E-3522 1-136
E-747
E-3775 1-140
E-545A (Std.) E-5239 1-136
E-2768 (Std.) E-5503 1-136
E-1880B E-3490B E-6075 1-135
(Heavy-Duty) (Heavy-Duty)
E-747
E-539 E-886 (Steel)
E-3775 (Plastic)
E-747 UNLINED
SHOE SIZE FMSI
"Q" BRAKE
E-523 (Smooth)
E-3304 6" 4514G
E-2177 (Knurled) E-2778 7" 4515G
E-3522 8 5/8" 4551B
UNLINED
E-3417 10" 4514G
SHOE SIZE FMSI } With
4549C 1/4" Rivets
E-2684 6" 4514G "Q PLUS" BRAKE
E-2241 7" 4515E E-5503 7" 4707
E-5239 8 5/8" 4551E E-3007A or E-539
"Q" SHOE FOR FRUEHAUF SPIDERS
E-523 (Smooth) E-6075 7" 4515E
E-2177 (Knurled)
1-48
SPICER (DANA) 12 1/4" DIA. "FAST CHANGE II" BRAKES
PAGE REFERENCE
E-2091
E-2767
E-586 (1 1/2" Dia.)
E-526
E-747
E-539 E-580 or
E-581
E-2389
E-2103
E-2390 E-2102
E-2391 E-526
E-2392
E-759 E-2409 SEE SLACK ADJUSTERS
E-1416A IN SECTION 1
E-1416A
E-2404
E-2398
E-747
E-539
E-586
I.D. TIP
For Brake Shoe Repair Kit Brake Shoe Unique.
use
E-10757
1-49
SPICER (DANA) 12 1/4" DIA.
PAGE REFERENCE
E-2767
E-586 (1 1/2" Dia.)
E-747 E-801
E-580
E-1893S
E-2766 E-2103
E-9792
E-1569 SEE SLACK ADJUSTERS
E-10801 IN SECTION 1
E-9789
E-2405
E-2405
E-10800
E-2398 E-747
E-539
E-586
SPICER HAS REVISED THE
1-50
S.O.S.
Special Order Service 1
Can't find it? Trouble sourcing products? Need assistance?
1-51
PARTS FOR SPICER (DANA)...
PAGE REFERENCE
EUCLID PAGE
NO. NO.
E-03009 4-76
E-04000 4-77
E-540 4-58, 61, 62
E-572 4-58, 61, 62
OUTER CUP AND CONE INNER CUP AND CONE E-573 4-61, 62, 69
HM212011/HM212049 HM218210/HM218248 (D22) E-975 4-76
(D21, D22) 653/663 (D21)
E-04000 E-03009
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
E-526 1-226
E-536 1-216
SEE SLACK ADJUSTERS E-580 1-223
IN SECTION 1 E-719 1-223
E-759 1-217
E-807 1-216
E-957 1-138
E-1416A 1-221
E-2087 1-208
E-957 (Bolt-on Spider) E-2102 1-217
E-2104 1-209
E-2287 1-207
E-580 E-526
E-1416A E-759 E-1416A E-719 E-526 E-2102 E-2104 Optional Rigid Cam
E-536
Support Bracket
E-759 (Nylon)
E-807 (Bronze)
1-52
...D21 and 22 AXLES WITH 16 1/2" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN VARIATIONS EUCLID
NO.
PAGE
NO.
1
"FAST CHANGE" AND ALTERNATE BRAKE PARTS E-801 1-115, 225
"XTRALIFE" "XL" BRAKES E-1112A 1-106
E-1113 1-118, 222
E-1893 (Plain) E-1816HD 1-104
E-1893 (Plain) E-1816S 1-103
E-8938 E-2766 E-8938 (Dimpled) E-801 E-1816SHD 1-103
(Dimpled) E-1893 1-120
E-2766 1-111
E-2769HD 1-95
E-2769S 1-95
E-2769SHD 1-96
E-3895S 1-101
E-801 E-1113 E-1112A E-1113 E-3895SHD 1-102
E-5515 1-101
E-6999S 1-96
E-6999SHD 1-97
E-8938 1-120
"FAST CHANGE"
"XTRALIFE" "ALTERNATE"
For Brake Repair Kit use E-2769HD, For Brake For Brake Repair Kit
E-2769S, E-2769SHD, E-3895S, E-3895SHD, Repair Kit use E-1816HD, E-1816S,
E-6999S, or E-6999SHD use E-5515 E-1816SHD
PAGE REFERENCE
SHOES, ROLLERS, SPRING & DUST SHIELD EUCLID PAGE
NO. NO.
E-523 1-107
"FAST CHANGE" AND E-539 1-116
"XTRALIFE" "XL" BRAKES E-545A 1-124
ALTERNATE BRAKE PARTS E-747 1-127
E-886 1-140
E-1582 1-107
E-1880B 1-124, 125
E-2177 1-107
E-2241 1-136
E-2767 1-127
E-886 (Steel) E-2768 1-124
E-2767 E-2778 1-137
E-3775 (Plastic) E-3007A 1-116
E-3490B 1-124
E-3775 1-140
E-747
E-747
E-2768 (Std.)
E-3490B (Heavy-Duty)
E-545A (Std.)
E-1880B
(Heavy-Duty)
"Fast Change"
E-523
E-2177
E-523 (Knurled)
(Smooth)
E-2177
(Knurled)
E-539
UNLINED
UNLINED "XL"
E-1582 SHOE SIZE FMSI
SHOE SIZE FMSI
E-2778 7" 4515E "Fast Change"
E-2241 7" 4515E
E-2778 7" 4701 "XL"
E-3007A or E-539
1-53
STD. FORGE AXLE WITH 12 1/4" DIA. BRAKES
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-03009 4-76
E-04000 4-77
E-540 4-58, 61, 62
E-572 4-58, 61, 62
OUTER CUP AND CONE INNER CUP AND CONE E-573 4-61, 62, 69
HM212011/HM212049 HM218210/HM218248 E-617 4-57
E-618 4-57
E-619 4-57
E-975 4-76
E-2237 4-61, 62
E-975 E-572 E-2237 E-573 E-540
E-617 E-618
E-04000 E-03009
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-526 1-226
WELD-ON SPIDER E-580
E-759
1-223
1-217
E-807 1-216
E-1416A 1-221
E-2091 1-229
E-2091 E-2102 1-217
E-2103 1-209
E-2404 1-225
E-580 E-2409 1-223
E-526 E-2469 1-187
E-2526 1-188
E-2091
E-564
E-526
1-54
STD. FORGE AXLE WITH 12 1/4" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN VARIATIONS EUCLID
NO.
PAGE
NO.
1
EARLY MODEL LATE MODEL
E-1106 1-113
Using Cast Shoes Using Fabricated Steel E-1107 1-116
Shoes E-1108 1-137
E-1106 E-1107 E-2392 E-2391 E-2389 (Plain) E-2390 E-2391 E-2029 1-113
E-8938 (Dimpled) E-2030HD 1-77
E-2389 1-120
E-2390 1-111
E-2391 1-118
E-2392 1-115
E-2029 E-2401 1-115
Drilled for Lubrication E-2402HD 1-77
E-2403HD 1-73
E-3373HD 1-75
E-2392 E-3374HD 1-73
E-8938 1-120
E-9281 1-75
E-9282 1-73
E-1108
PAGE REFERENCE
1-55
PARTS FOR STD. FORGE A-17, A-19 & A-22 ...
PAGE REFERENCE
HUB CAPS, SPINDLE NUTS, SEALS & STUDS EUCLID PAGE
NO. NO.
E-03009 4-76
E-04000 4-77
E-540 4-58, 61, 62
E-572 4-58, 61, 62
E-573 4-61, 62, 69
E-975 4-76
OUTER CUP AND CONE INNER CUP AND CONE E-2237 4-61, 62
HM212011/HM212049 653/663
E-04000 E-03009
PAGE REFERENCE
CAMSHAFT, BUSHINGS AND BRACKET PARTS EUCLID PAGE
NO. NO.
SEE SLACK ADJUSTERS E-526 1-226
IN SECTION 1 E-536 1-216
E-580 1-223
E-719 1-223
E-957 (Bolt-on Spider) E-759 1-217
E-807 1-216
E-957 1-138
E-1416A 1-221
E-2087 1-208
E-2102 1-217
E-2104 1-209
E-2287 1-207
E-2409 1-223
E-580 E-526
E-1416A E-759 E-1416A E-719 E-526 E-2102 E-2104 Optional Rigid Cam
E-536 E-2409 Support Bracket
E-759 (Nylon)
E-807 (Bronze)
1-56
... SERIES TRAILER AXLE WITH 16 1/2" DIA. BRAKES
PAGE REFERENCE
ANCHOR PIN VARIATIONS EUCLID PAGE 1
NO. NO.
EARLY MODEL BOLT-ON SPIDER LATE MODEL WELD-ON SPIDER KIT-4HD 1-98
E-538 E-801 KIT-4S 1-99
KIT-4SHD 1-99
E-502 1-112
E-512 1-111
E-537 1-114
E-538 1-115
E-538 E-563 E-537 E-512 E-537 E-563 E-1113 E-563 1-114
E-1113 E-1112A E-801 E-801 1-115, 225
E-864 1-138
E-957 1-138
E-1112A 1-106
E-1113 1-118, 222
E-2119 1-112
PAGE REFERENCE
SHOES, ROLLERS, SPRING & DUST SHIELD EUCLID PAGE
NO. NO.
E-886 (Steel)
E-3775 (Plastic) E-500 1-109
E-501 1-109
E-523 1-107
E-539 1-116
E-541 1-119
E-544 1-124
E-747 1-127
E-773 1-117
E-886 1-140
E-1880B 1-124, 125
E-2177 1-107
E-2241 1-136
E-2684 1-136
E-3775 1-140
E-5239 1-136
E-747
E-544
UNLINED
E-747 SHOE SIZE FMSI
E-2684 6" 4514G
E-2241 7" 4515E E-773
1-57
WAGNER 15" DIA. BRAKES
PAGE REFERENCE
EUCLID PAGE
FRONT AXLE NO. NO.
E-979 E-979 1-123
E-2723 1-115
E-2724 1-118
E-2725 1-117
E-2726 1-117
E-2728 1-133
E-2729 1-133
E-2732 1-215
E-2733 1-222
E-4961A E-2734 1- 225
E-2740 1-82
SEE SLACK ADJUSTERS E-2770 1-123
IN SECTION 1 E-2798 1-113
E-3291 1-83
E-3353A 1-192
FMSI 1278 E-3421A 1-108
E-4785 1-133
E-2734 E-4961A 1-116, 4-7
CAMSHAFTS NOT
AVAILABLE
E-2733
E-2732
E-979
E-4961A
E-2723
E-2728
FMSI 1279
CAMSHAFTS NOT
AVAILABLE
E-2725
E-2726
E-2724
BRAKE REPAIR KITS
E-2798
UNLINED
SHOE SIZE FMSI
E-2729 or
N/A 3" 1278 FMSI 1308A
E-2728 3 1/2" 1279
E-2729 4" 1308A CAMSHAFTS NOT
(Thin Web) AVAILABLE
E-4785 4" 1308A
(Thin Web)
1-58
WAGNER 15" DIA. BRAKES
PAGE REFERENCE
EUCLID
NO.
PAGE
NO.
1
E-801 1-115, 225
E-980 1-123
E-1269 1-114
E-1337 1-111
E-2409 1-223
E-2712 1-133
E-2713 1-84
E-2714A 1-149, 164
E-2715A 1-149, 164
E-2717 1-221
E-3354 1-193
E-4736 1-226
E-4736
B
SEE SLACK ADJUSTERS
IN SECTION 1
E-2409
B
UNLINED
SHOE SIZE FMSI
E-2712 15" x 7" 4595
E-2409
B B
E-2717
A
B
E-1269
A
E-2717
B
E-980
A A
E-2714A RH
E-2715A LH
B
BRAKE REPAIR KITS E-801
E-1337 A
For Brake Repair Kit A E-1269
A use A
E-2713
For Camshaft Repair Kit
B use
E-3354
1-59
BENDIX 15" DIA. WEDGE BRAKES
PAGE REFERENCE
TRACTOR STEERING AXLE EUCLID PAGE
NO. NO.
NON-SERVO E-1214 1-247
E-1215 1-246
E-1216 1-246
E-1217 1-246
E-1218 1-247
E-1493 1-246
E-1495 1-246
WEDGE ASSEMBLY E-1496 1-247
E-1497 1-126, 247
E-2153 1-247
E-2153 10o E-2154 1-247
E-2154 12o E-2155 1-247
E-2281 E-2155 14o E-2156 1-247
E-2156 18o E-2159 1-248
E-2161 1-246
E-2162 1-246
E-1214 E-2281 1-246
E-1215 E-2282 1-246
E-2552 1-247
E-2745 1-126, 247
E-1216
E-1217
E-2161
E-1218
E-2162
E-2552
Available
in Kit Only
E-2745
E-2162 E-1495
UNLINED E-2161
SHOE
E-1496
UNLINED
SHOE
1-60
BENDIX 15" DIA. WEDGE BRAKES
PAGE REFERENCE
TRACTOR-TRAILER SPIDER MOUNTED BRAKE EUCLID
NO.
PAGE
NO.
1
TWIN-PLEX E-1214 1-247
E-1215 1-246
E-1216 1-246
E-1217 1-246
E-1218 1-247
E-1230 1-247
E-1489 1-132
E-2153 1-247
E-2154 1-247
E-2155 1-247
E-2156 1-247
E-2157 1-248
E-2158 1-248
E-2161 1-246
E-2162 1-246
E-2163 1-126, 247
E-2281 1-246
E-2281 E-2552 1-247
E-1215
E-2552 E-1214
E-1216
E-1217
E-2161
E-2162
E-2552
Shoe stabilizer
spring used
when spider is E-1230
rotated 10o or
more.
UNLINED
SHOE SIZE FMSI
E-1489 6" 4605
N/A 7" 4602
For Major Rebuild Kit
use
E-2157
1-61
MERITOR "STOPMASTER" 12 1/4" DIA. WEDGE BRAKES
PAGE REFERENCE
TRAILER EUCLID PAGE
NO. NO.
12 1/4" SPIDER MOUNTED BRAKE
E-1136 1-251
E-1137 1-251
E-1261 1-252
E-2134 1-251
E-2135 1-251
E-2136 1-251
E-2137 1-251
E-2138 1-251
E-2139 1-251
E-2140 1-252
E-2141 1-252
E-2142 1-252
E-2193 1-253
E-2484 1-250
E-3994 1-251
E-3995 1-251
E-3996 1-250
E-3997 1-250
E-3998 1-250
E-3999 1-250
E-5531 1-250
E-5539 1-251
SHOE NO LONGER E-5541 1-252
AVAILABLE
E-2134 (10oR)
E-2135 (10oL) E-3995
E-1136 (12oR)
E-1137 (12oL)
E-2136 (14oR)
E-2137 (14oL)
E-2138 (16oR)
E-2139 (16oL)
E-5539
E-5541
E-2193
E-3996 (10o)
E-3997 (12o)
E-3998 (14o)
E-5531
E-3999 (16o)
Also includes
E-5539 Adjusting
Pawl Assembly)
E-3994
E-2484
WEDGE ASSEMBLY
E-2140 (10o)
E-1261 (12o)
E-2141 (14o)
E-2142 (16o)
1-62
MERITOR "STOPMASTER" 15" DIA. WEDGE BRAKES
TRUCK & TRAILER
PAGE REFERENCE
EUCLID
NO.
PAGE
NO.
1
BACKING PLATE MOUNTED
E-1261 1-252
(SINGLE ACTUATION) E-1457 1-132, 252
E-1458 1-126, 252
E-2141 1-252
E-2142 1-252
E-3492 1-250
E-3499 1-250
E-3525 1-253
E-5532 1-251
E-5537 1-251
E-5538 1-251
E-5540 1-251
E-5542 1-254
E-5543 1-254
E-3492
E-5532
E-3499
E-5537 (12o)
E-5538 (14o)
E-5540
E-1458
E-1458
UNLINED
SHOE SIZE FMSI
E-1457 3 1/2" 4562A For Minor Repair Kit
E-1261 (12o)
E-2141 (14o) use
o
E-2142 (16 ) E-5542 or E-5543
1-63
MERITOR "STOPMASTER" 15" DIA. WEDGE BRAKES
PAGE REFERENCE
TRUCK & TRACTOR EUCLID PAGE
NO. NO.
BACKING PLATE MOUNTED E-1261 1-252
(DUAL ACTUATION) E-1457 1-132, 252
E-1458 1-126, 252
E-2141 1-252
E-2142 1-252
E-2476 1-126, 252
E-3492 1-250
UNLINED E-3499 1-250
SHOE SIZE FMSI E-3525 1-253
E-5532 1-251
E-1457 3 1/ 2" 4562A E-5540 1-251
E-5541 1-252
E-5542 1-254
E-5543 1-254
E-3492
E-5532
E-5540
E-3499
E-1458
(Pre-121)
E-2476
(Post-121)
E-5541
E-5532
E-1261 (12o)
E-2141 (14o)
E-2142 (16o)
1-64
MERITOR "STOPMASTER" 15" DIA. RSA WEDGE BRAKES
PAGE REFERENCE
TRUCK & TRACTOR EUCLID
NO.
PAGE
NO.
1
BACKING PLATE MOUNTED E-801 1-115, 225
(DUAL ANCHOR PIN) E-1261 1-252
E-1458 1-126, 252
E-2141 1-252
E-2142 1-252
E-3424 1-113
E-3427 1-118
UNLINED E-3492 1-250
SHOE SIZE FMSI E-3495 1-132, 252
E-3499 1-250
E-3495 4" 1308 E-3525 1-253
E-4961A 1-116, 4-7
E-5532 1-251
E-5537 1-251
E-5538 1-251
E-5540 1-251
E-5542 1-254
E-5543 1-254
E-3492
E-5532
EUCLID KIT E-3525
E-801
E-3499
E-1458
E-5540
E-1458
E-3427
E-
4961A
E-1261 (12o)
E-2141 (14o)
E-2142 (16o)
1-65
MERITOR "STOPMASTER" 15" DIA. WEDGE BRAKES
PAGE REFERENCE
TRACTOR EUCLID PAGE
NO. NO.
BOLT-ON SPIDER
E-1136 1-251
E-1137 1-251
E-1139 1-132, 252
E-1261 1-252
E-2134 1-251
E-2135 1-251
E-2136 1-251
E-2137 1-251
E-2138 1-251
E-2139 1-251
E-2140 1-252
E-2141 1-252
E-2484 1-250
E-2522 1-253
E-2689 1-132, 252
E-3994 1-251
E-3995 1-251
E-3996 1-250
E-3997 1-250
E-3998 1-250
E-3999 1-250
E-5531 1-250
E-5539 1-251
E-5541 1-252
E-2484 E-5544 1-256
E-5545 1-256
E-7211 1-252
E-3994 E-7212A 1-254
E-7213A 1-255
E-2522 E-5531 E-7214A 1-255
Assembly
E-3996 (10o)
E-3997 (12o)
E-3998 (14o) E-5539
E-3999 (16o)
(Also includes E-5539
Adjusting Pawl
Assembly)
E-7211
E-5541
E-2134 (10oR)
E-2135 (10oL)
E-1136 (12oR)
E-1137 (12oL)
E-3995
E-2136 (14oR)
E-2137 (14oL)
E-2138 (16oR)
E-2139 (16oL)
1-66
MERITOR "STOPMASTER" 15" DIA. WEDGE BRAKES
TRAILER
PAGE REFERENCE
EUCLID PAGE
1
NO. NO.
WELD-ON SPIDER WITH BOLT-ON HOUSING
E-1136 1-251
E-1137 1-251
E-1139 1-132, 252
E-1140 1-126, 252
E-1261 1-252
E-2134 1-251
E-2135 1-251
E-2136 1-251
E-2137 1-251
E-2138 1-251
E-2139 1-251
E-2140 1-252
E-2141 1-252
E-2142 1-252
E-2193 1-253
E-2484 1-250
E-2522 1-253
E-2689 1-132, 252
E-3994 1-251
E-3995 1-251
E-3996 1-250
E-3997 1-250
E-3998 1-250
E-3999 1-250
E-2134 (10oR) E-5531 1-250
E-5539 1-251
E-2135 (10oL) E-5541 1-252
E-1136 (12oR) E-2522 E-5544 1-256
E-1137 (12oL) Assembly E-5545 1-256
E-2136 (14oR) E-3995 E-7211 1-252
E-7212A 1-254
E-2137 (14oL) E-7213A 1-255
E-2138 (16oR) E-7214A 1-255
E-2139 (16oL)
E-2193
E-5539
E-5541
E-7211
E-1140
(Opt. for
6" & 7" Shoes)
E-3996 (10o)
E-3997 (12o)
E-5531
E-3998 (14o)
E-3999 (16o)
E-3994
E-2484
1-67
BRAKE REPAIR KITS
PLUS
TM
1-68
BRAKE REPAIR KITS
1
PLUS
TM
E-2769SHD, E-4515QHD,
E-6999SHD, E-4515QMBHD,
16-1/2" x 5" Meritor Q Plus & Spicer XTRALIFE II 4720 E-10854 E-2769HD, E-9644 E-3895SHD E-4515UHD
E-4515Q, E-4515QHD,
E-2769S, E-2769SHD, E-4515QMB,
16-1/2" X 5" Meritor Q, Spicer Fast Change and E-2769HD, E-9070, E-6999S, E-6999SHD, E-4515QMBHD,
Hendrickson INTRAAX 4524B E-3303 E-9644 E-3895S, E-3895SHD E-4515U, E-4515UHD
16-1/2" x 5" Meritor Q with Relocated Retainer
Spring Hole 4524B E-3823 E-3858 n/a n/a
16-1/2" x 5" Spicer ESII 4719 E-10270 E-10760 n/a n/a
16-1/2" x 6" Eaton High Mount 4317G E-9509 E-3801 n/a n/a
16-1/2" x 6" Eaton Low Mount 4317G E-1777 E-1887AHD, E-2820 E-1887ASHD E-4311EHD
E-1816HD,
E-1816HDMB, E-1816S, E-1816SHD,
16-1/2" x 6" Meritor P 4514G E-2684 KIT-4HD KIT-4S, KIT-4SHD E-4515P, E-4515PHD
E-2769SHD, E-4515QHD,
E-6999SHD, E-4515QMBHD,
16-1/2" x 6" Meritor Q Plus & Spicer XTRALIFE II 4715 E-10847 E-2769HD, E-9644 E-3895SHD E-4515UHD
16-1/2" x 6" Meritor Q with Relocated Retainer
Spring Hole 4514G E-9780 E-9644, E-3858 n/a n/a
E-4515Q, E-4515QHD,
E-2769S, E-2769SHD, E-4515QMB,
16-1/2" X 6" Meritor Q, Spicer Fast Change & E-2769HD, E-3858, E-6999S, E-6999SHD, E-4515QMBHD,
Hendrickson INTRAAX 4514G E-3304 E-9070, E-9644 E-3895S, E-3895SHD E-4515U, E-4515UHD
16-1/2" x 6" Spicer ESII 4725 E-10271 E-10760 n/a E-4709ES2
16-1/2" x 7" Bendix 4515E E-7236 n/a E-7237, E-7238 n/a
16-1/2" x 7" Eaton High Mount 4311J E-2819 E-3801 n/a n/a
16-1/2" x 7" Eaton Low Mount 4311J E-1778 E-1887AHD E-1887ASHD E-4311EHD
16-1/2" x 7" Fruehauf Pro-Par 4515E E-2685 E-2121, E-2121HD E-2121S, E-2121SHD n/a
16-1/2" x 7" Fruehauf XEM 2nd Generation 4515E n/a n/a E-4880S, E-4880SHD n/a
16-1/2" x 7" Fruehauf XEM 3rd Generation 4515E E-3920 E-3710HD E-3710S, E-3710SHD E-4515X, E-4515XHD
16-1/2" x 7" Mack Fabricated Shoes 4515G n/a E-1607HD n/a n/a
E-2769S, E-2769SHD,
16-1/2" x 7" Meritor for Fruehauf (F5) 4515G n/a E-2769HD E-6999S, E-6999SHD, E-4515Q, E-4515QMB
E-1816HD,
E-1816HDMB, E-1816S, E-1816SHD,
16-1/2" x 7" Meritor P 4515G E-2241 KIT-4HD KIT-4S, KIT-4SHD E-4515P, E-4515PHD
E-2769SHD, E-4515QHD,
16-1/2" x 7" Meritor Q Plus Spicer XTRALIFE II & E-6999SHD, E-4515QMBHD,
Hendrickson INTRAAX 4707 E-5503 E-2769HD, E-6999HD E-3895SHD E-4515UHD
16-1/2" x 7" Spicer & Standard Forge Cast Shoes 4468 n/a KIT-1 n/a n/a
16-1/2" x 7" Spicer Cast Shoe 4708 E-9040 E-9048 n/a n/a
16-1/2" x 7" Spicer ES 4709 E-5480 E-5481A E-11318 E-4709ES
16-1/2" x 7" Spicer ES Retrofit for Freuhauf 4708 E-8922 E-8923 n/a n/a
16-1/2" x 7" Spicer ES Retrofit for Meritor 4708 E-8924 E-8925 E-8925SHD n/a
16-1/2" x 7" Spicer ESII 4709 E-10272 E-10244 E-11319, E-10244S E-4709ES2
E-4515Q, E-4515QHD,
16-1/2" X 7" Spicer Fast Change XLII and E-2769S, E-2769SHD, E-4515QMB,
Hendrickson INTRAAX 4515E E-2778 E-2769HD E-6999S, E-6999SHD, E-4515QMBHD
16-1/2" x 7" Spicer Severe Duty 4708 E-9049 E-9052 n/a E-4708XEM
16-1/2" x 7" Spicer XL 4701 n/a E-5515 n/a n/a
E-2769SHD, E-4515QHD,
16-1/2" x 8" Meritor Q 4644B n/a E-2769HD E-6999SHD E-4515QMBHD
E-2769SHD, E-4515QHD,
E-6999SHD, E-4515QMBHD,
16-1/2" x 8" Meritor Q Plus 4718 E-10850 E-2769HD, E-6999HD E-3895SHD E-4515UHD
16-1/2" x 8-5/8" Eaton 4674 E-9054 E-1887AHD E-1887ASHD n/a
16-1/2" x 8-5/8" Fruehauf XEM3 4551B E-3713 E-3710HD E-3710S, E-3710SHD E-4515X, E-4515XHD
E-1816HD,
E-1816HDMB, E-1816S, E-1816SHD,
16-1/2" x 8-5/8" Meritor P 4551B E-5239 KIT-4HD KIT-4S, KIT-4SHD E-4515P, E-4515PHD
E-4515Q, E-4515QHD,
E-2769S, E-2769SHD, E-4515QMB,
E-6999S, E-6999SHD, E-4515QMBHD,
16-1/2" x 8-5/8" Meritor Q 4551B E-3522 E-2769HD E-3895S, E-3895SHD E-4515U, E-4515UHD
E-2769SHD, E-4515QHD,
16-1/2" x 8-5/8" Meritor Q Plus, E-6999SHD, E-4515QMBHD,
Spicer XTRALIFE II & Hendrickson INTRAAX 4711 E-10844 E-2769HD E-3895SHD E-4515UHD
16-1/2" x 8-5/8" Spicer ESII 4726 E-10273 E-10244 E-11319, E-10244S E-4709ES2
16-1/4" x 3-1/2" Meritor T 4561B E-3441 E-4692 n/a n/a
18" x 7" Eaton Single Anchor Pin 4527B E-2801 E-2821 n/a n/a
18" x 7" Meritor Cast Iron Shoes 4669 E-4902 E-3992 n/a n/a
18" x 7" Meritor P Cast Shoes 4471B E-4902 E-3518 n/a n/a
18" x 7" Spicer & Standard Forge Fabricated Shoes 4284 n/a E-5499 n/a n/a
1-72
1
BRAKE REPAIR KITS
E-3374HD MEGA PLUS CONVERT SPICER (DANA) 12-1/4" BRAKE FROM CAST TO FAB SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2414A 1 Anchor Pin Contains Euclids own design anchor
2 2 E-2401 Anchor Pin Link pin (E-2414) that allows fabricated
3 2 E-1107 Anchor Pin Jam Nut steel shoes to be used with Std.
4 2 E-1106 Anchor Pin Lock Washer Forge's bolt-on Spider for Cast
5 2 E-11741 Brake Shoe Roller Shoes. For use with old style
6 1 E-2398 Brake Shoe Return Spring "Fast-Rise" Camshafts only.
7 2 E-539 Roller Retainer Contains new Posi-Plus roller. For
8 2 E-747 Brake Shoe Spring use with the following Brake Shoes:
Retainer E-2393A (5-1/2"), E-2394A (7-1/2").
REPLACES:
Dana/Spicer HK49-125
E-9282 MEGA PLUS CONVERT SPICER (DANA) 12-1/4" BRAKE FROM CAST TO FAB SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2414 Brake Shoe Anchor Pin Contains Euclids own design anchor
2 2 E-2401 Anchor Pin Link pin (E-2414) that allows fabricated
3 2 E-1107 Anchor Pin Jam Nut steel shoes to be used with Std.
4 2 E-1106 Anchor Pin Lock Washer Forge's bolt-on Spider for Cast
5 2 E-586 Brake Shoe Roller Shoes. For use with New Style
6 1 E-2398 Brake Shoe Return Spring Camshafts. For use with the
7 2 E-539 Roller Retainer following Brake Shoes: E-2393A
8 2 E-747 Brake Shoe Spring (5-1/2"), E-2394A (7-1/2").
Retainer
9 2 E-2392 Anchor Pin Retainer
E-2403HD MEGA PLUS CONVERT STD. FORGE 12-1/4" BRAKE FROM CAST TO FAB SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2414 Brake Shoe Anchor Pin Contains Euclids own design anchor
2 2 E-2401 Anchor Pin Link pin (E-2414) that allows fabricated
3 2 E-1107 Anchor Pin Jam Nut steel shoes to be used with Std.
4 2 E-1106 Anchor Pin Lock Washer Forges bolt-on Spider for Cast
5 2 E-2395 Brake Shoe Roller Shoes. For use with the following
6 2 E-2396 Brake Shoe Roller Pin Brake Shoe: E-2394 (7-1/2")
7 2 E-527 Roller Pin Retainer REPLACES:
8 1 E-2398 Brake Shoe Return Spring Dana/Spicer 45A
9 2 E-2399 Brake Shoe Retainer Dana/Spicer HK45XLS
10 2 E-2392 Anchor Pin Retainer
1-73
BRAKE REPAIR KITS
E-2126 MEGA PLUS EATON 12-1/4" SINGLE ANCHOR PIN BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 1 E-1403 1 Anchor Pin For use with the following Brake
2 2 E-580 Camshaft Spacer Washer Shoe: E-1398 (7-1/2")
3 1 E-526 Camshaft Lock Ring REPLACES:
4 2 E-1406 Brake Shoe Roller Trailmobile 38-2126
5 1 E-937 Locknut Dana/Spicer 40A
6 1 E-1402 Return Spring Dana/Spicer TA40A
7 2 E-1400 Brake Shoe Return Spring Dana/Spicer HK40
8 1 E-3975 Lock Washer
1-74
1
BRAKE REPAIR KITS
E-10756 MEGA PLUS SPICER (DANA) 12-1/4" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For use on Post 11/1/96 spiders that
2 2 E-586 Brake Shoe Roller use stepped anchor pins
3 2 E-1893S 1 Anchor Pin Bushing (Spicer 7-1/2" Brake Shoe No.
4 2 E-2767 Brake Shoe Retainer M12WN127-X). This 12-1/4" brake
Spring utilizes many components used on
5 1 E-2398 Brake Shoe Return Spring the standard 16-1/2" "Fast Change
6 2 E-747 Brake Shoe Spring Brake. For use with "0794"
Retainer Camshafts only.
7 2 E-539 Roller Retainer
E-10757 MEGA PLUS SPICER (DANA) 12-1/4" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2390 Anchor Pin Retrofit Kit for use of Spicer 7-1/2"
2 2 E-586 Brake Shoe Roller Brake Shoe No. M12WN127-X on
3 2 E-2389 Anchor Pin Bushing Pre 11/1/96 spiders that use straight
4 4 E-2391 Anchor Pin Washer anchor pins. For use with "0794"
5 4 E-2392 Anchor Pin Retainer Camshafts only.
6 2 E-2767 Brake Shoe Retainer
Spring
7 1 E-2398 Brake Shoe Return Spring
8 2 E-747 Brake Shoe Spring
Retainer
9 2 E-539 Roller Retainer
E-3373HD MEGA PLUS SPICER (DANA) 12-1/4" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2390 Anchor Pin For use with Old Style "Fast-Rise"
2 4 E-2391 Anchor Pin Washer Camshafts only. Contains new
3 4 E-2392 Anchor Pin Retainer Posi-Plus roller. For use with the
4 2 E-11741 Brake Shoe Roller following Brake Shoes: E-2393A
5 1 E-2398 Brake Shoe Return Spring (5-1/2"), E-2394A (7-1/2")
6 2 E-2389 Anchor Pin Bushing REPLACES:
7 2 E-3007A Roller Retainer Dana/Spicer HK48XLS-125
8 2 E-747 Brake Shoe Spring
Retainer
E-9281 MEGA PLUS SPICER (DANA) 12-1/4" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2390 Anchor Pin For use with the following Brake
2 4 E-2391 Anchor Pin Washer Shoes: E-2393A (5-1/2"), E-2394A
3 4 E-2392 Anchor Pin Retainer (7-1/2")
4 2 E-586 Brake Shoe Roller REPLACES:
5 1 E-2398 Brake Shoe Return Spring Dana/Spicer HK48XLS-150
6 2 E-2389 Anchor Pin Bushing
7 2 E-539 Roller Retainer
8 2 E-747 Brake Shoe Spring
Retainer
1-75
BRAKE REPAIR KITS
E-3782 MEGA PLUS SPICER (DANA) 12-1/4" NEW STYLE "U" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5304 Anchor Pin For use with Old Style "Fast-Rise"
2 2 E-11741 Brake Shoe Roller Camshafts only. Contains new
3 2 E-3007A Roller Retainer Posi-Plus roller. For use with the
4 1 E-2398 Brake Shoe Return Spring following Brake Shoe: E-5303A
5 2 E-747 Brake Shoe Spring (7-1/2")
Retainer REPLACES:
6 1 E-5305 Retainer Spring Dana/Spicer 47A
Dana/Spicer HK47XLS-125
E-9283 MEGA PLUS SPICER (DANA) 12-1/4" NEW STYLE "U" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5304 Anchor Pin For use with New Style Camshafts
2 2 E-586 Brake Shoe Roller E-9263 through E-9280.
3 2 E-539 Roller Retainer REPLACES:
4 1 E-2398 Brake Shoe Return Spring Dana/Spicer HK47XLS-150
5 2 E-747 Brake Shoe Spring
Retainer
6 1 E-5305 Retainer Spring
E-5306 MEGA PLUS SPICER (DANA) 12-1/4" OLD STYLE "U" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5304 Anchor Pin For use with the following Brake
2 2 E-2395 Brake Shoe Roller Shoe: E-5303A (7-1/2")
3 2 E-2396 Brake Shoe Roller Pin
4 1 E-2398 Brake Shoe Return Spring
5 2 E-2399 Brake Shoe Retainer
6 2 E-527 Roller Pin Retainer
7 1 E-5305 Retainer Spring
E-10679 MEGA PLUS SPICER (DANA) and STD. FORGE 12-1/4" BRAKE WITH CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Pin Same as E-2030HD minus Roller,
2 1 E-1289 1 Anchor Pin Link Roller Pin and Brake Shoe Bushing.
3 2 E-10776 Anchor Pin Lock Ring For use with the following Brake
4 2 E-1107 Anchor Pin Jam Nut Shoes: E-1412A (5-1/2"), E-1413A
5 2 E-2101 Brake Shoe Return Spring (7-1/2")
1-76
1
BRAKE REPAIR KITS
E-2030HD MEGA PLUS SPICER (DANA) and STD. FORGE 12-1/4" BRAKE WITH CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2029 Anchor Pin For use with the following Brake
2 1 E-1289 1 Anchor Pin Link Shoes: E-1412A (5-1/2"), E-1413A
3 2 E-10776 Anchor Pin Lock Ring (7-1/2")
4 2 E-1107 Anchor Pin Jam Nut REPLACES:
5 2 E-2101 Brake Shoe Return Spring Dana/Spicer 42A
6 2 E-1808 Brake Shoe Bushing Dana/Spicer M10LK105X
7 2 E-2176 Brake Shoe Roller Dana/Spicer TA42A
8 2 E-501 Brake Shoe Roller Pin
9 2 E-773 Roller Pin Set Screw
10 2 E-1106 Anchor Pin Lock Washer
E-2402HD MEGA PLUS STANDARD FORGE 12-1/4" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2390 Anchor Pin For use with the following Brake
2 4 E-2391 Anchor Pin Washer Shoes: E-9025 (4"), E-9026 (5"),
3 4 E-2392 Anchor Pin Retainer E-2393 (5-1/2"), E-2394 (7-1/2")
4 2 E-2395 Brake Shoe Roller REPLACES:
5 2 E-2396 Brake Shoe Roller Pin Dana/Spicer 43A
6 2 E-527 Roller Pin Retainer Eaton 5-2244
7 1 E-2398 Brake Shoe Return Spring Eaton 5-2244B
8 2 E-2399 Brake Shoe Retainer Dana/Spicer HK43XLS
9 2 E-2389 Anchor Pin Bushing Dana/Spicer M12LK101X
10 2 E-1106 Anchor Pin Lock Washer
E-1812 MEGA PLUS STD. FORGE 12-1/4" BRAKE WITH FLAT HEAD CAMSHAFTS
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1813 1 Brake Shoe Anchor Pin For old style cast brake with flat
2 1 E-1289 1 Anchor Pin Link head camshafts. Cannot change to
3 2 E-1106 Anchor Pin Lock Washer "S" cam. Shoe no longer available.
4 2 E-1107 Anchor Pin Jam Nut
5 2 E-1025 Brake Shoe Return Spring
6 2 E-1808 Brake Shoe Bushing
7 2 E-947 1 Brake Shoe Wear Plate
1-77
BRAKE REPAIR KITS
E-10869 MEGA PLUS MERITOR COACH 14-1/2" "W" SERIES BRAKE DRIVE AXLE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10828 Anchor Pin Bushing For use with the following Meritor
2 2 E-4961A 3/4"-16 Lock Nut Coach 14-1/2" x 10" "W" Series
3 1 E-10826 Return Spring Brake Shoe, Type 1 and Type 3:
4 2 E-10824 Brake Shoe Roller E-10810 (10")
5 2 E-5095 Camshaft Spacer Washer
6 2 E-10833 Anchor Pin Washer
7 2 E-10865 Lock Washer
E-10870 MEGA PLUS MERITOR COACH 14-1/2" "W" SERIES BRAKE DRIVE AXLE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 1 E-10826 Return Spring For use with the following Meritor
2 4 E-10834 Anchor Pin Lock Ring Coach 14-1/2" x 10" " W" Series
3 2 E-10836 Anchor Pin Bushing Brake Shoe, Type 2: E-10809 (10")
4 2 E-10838 Brake Shoe Roller
5 2 E-10835 Anchor Pin
6 2 E-10837 1 Bolt
E-10841A MEGA PLUS MERITOR COACH 14-1/2" "W" SERIES BRAKE STEER AXLE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10818 Return Spring For use with the following Meritor
2 2 E-10814 Anchor Pin Coach 14-1/2" x 4" and 6" "W"
3 2 E-10815 Lock Bolt Series Brake Shoes: E-10802 (4"),
4 1 E-10817 Anchor Pin Lock E-10803 (6")
5 2 E-10812 Brake Shoe Roller
6 4 E-801 Lock Ring
7 2 E-10816 Washer
E-10866A MEGA PLUS MERITOR COACH 14-1/2" "W" SERIES BRAKE STEER AXLE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10818 Return Spring For use with the following Meritor
2 2 E-10816 Washer Coach 14-1/2" x 5" "W" Series
3 2 E-10815 Lock Bolt Brake Shoe: E-10804
4 2 E-10821 Nut
5 2 E-10812 Brake Shoe Roller
6 2 E-10819 Anchor Pin Link
7 2 E-10817 Anchor Pin Lock
1-78
1
BRAKE REPAIR KITS
E-11981 MEGA PLUS EATON 15" SINGLE ANCHOR PIN FRONT BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10198 Retainer Spring For use with the following Brake
2 1 E-11980 Return Spring Shoe: E-11982 (4"). FMSI 4729.
3 2 E-5477 Brake Shoe Roller
4 2 E-5478 Roller Retainer
E-5139 MEGA PLUS EATON 15" SINGLE ANCHOR PIN FRONT BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3421A Roller For use with the following Brake
2 1 E-5122 Retainer Spring Shoe: E-5126 (4")
3 1 E-5123 Brake Shoe Return Spring REPLACES:
Eaton 1008306
Volvo White GMC 3947830
Eaton 5-2242
Dana/Spicer 54A
Wagner 911030
Volvo White GMC R507004
Dana/Spicer TA54A
1-79
BRAKE REPAIR KITS
E-9064 MEGA PLUS MERITOR 15" "Q PLUS" FRONT BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-1893S 1 Anchor Pin Bushing use with the following Brake Shoe:
3 2 E-2767 Brake Shoe Retainer E-9062 (4") Double Web "Q Plus"
Spring Shoe
4 1 E-9063 Brake Shoe Return Spring REPLACES:
5 2 E-11741 Brake Shoe Roller Meritor KIT8824HD
6 2 E-747 Brake Shoe Spring Volvo White GMC R508824
Retainer Dana/Spicer TA66A
7 2 E-3007A Roller Retainer
1-80
1
BRAKE REPAIR KITS
E-7899 STOPMATE PLUS MERITOR 15" "Q" SERIES FRONT BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 1 E-3872 Brake Shoe Return Spring Same as E-3869 minus Anchor Pins
2 1 E-3873 Retainer Spring and Hardware. For use with the
3 2 E-3421A Roller following Brake Shoe: E-5528 (4")
4 2 NSS 1 Shoe Clip Single Web "Q" Brake Shoe
REPLACES:
Volvo White GMC R508030
E-1308T STOPMATE MERITOR 15" "T" SERIES FRONT BRAKE TYPES 1 and 2
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Brake Shoe Roller Stopmate version of E-4691
2 2 NSS 1 Brake Shoe Anchor Pin
3 2 NSS 1 Spring
4 2 NSS 1 Locknut
5 2 NSS 1 Washer
6 2 NSS 1 Ring Clip
7 1 NSS 1 Hold Down Kit
1-81
BRAKE REPAIR KITS
E-4691 MEGA PLUS MERITOR 15" "T" SERIES FRONT BRAKE TYPES 1 and 2
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3421A Roller For use with the following Brake
2 2 E-3424 1 Anchor Pin Shoes: E-3438 (3-1/2"), E-3439 (4")
3 1 E-3437 Brake Shoe Return Spring REPLACES:
4 2 E-4961A 3/4"-16 Lock Nut Eaton 5-3387
5 2 E-3427 Anchor Pin Washer Dana/Spicer 51-1A
6 2 E-801 Lock Ring Wagner 911031
7 1 E-4800 Hold Down Kit Dana/Spicer HK50
Meritor KIT9094
Volvo White GMC R509094
Dana/Spicer TA511A
E-11747 STOPMATE PLUS SPICER 15" and 16-1/2" HEAVY AXLE BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-539 Roller Retainer For use with Spicer Heavy Axle
2 2 E-586 Brake Shoe Roller brake shoes.
3 1 NSS 1 Return Spring REPLACES:
4 2 NSS 1 Spring Dana/Spicer HK95XLS
5 2 E-747 Brake Shoe Spring
Retainer
1-82
1
BRAKE REPAIR KITS
E-7231 STOPMATE PLUS BENDIX 15" x 4" STEER AXLE BRAKE. "FORD CARGO"
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Roller For use with the following shoe:
2 2 NSS 1 Pin E-7230
3 1 NSS 1 Anchor Pin REPLACES:
4 1 NSS 1 Spring Bendix 104627
5 2 NSS 1 Spring Ford E8HZ2027A
Dana/Spicer HK70
E-9141 MEGA PLUS EATON 15" x 6" "ES" "REDUCED ENVELOPE" FRONT AXLE BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5477 Brake Shoe Roller For use with the following Brake
2 2 E-5478 Roller Retainer Shoe: E-9140 (6" )
3 2 E-9037 Brake Shoe Return Spring REPLACES:
4 2 E-2767 Brake Shoe Retainer Eaton 823141
Spring
1-83
BRAKE REPAIR KITS
E-2713 MEGA PLUS WAGNER 15" x 6" and 7" DRIVE AXLE BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1337 Anchor Pin For use with the following Brake
2 4 E-801 Lock Ring Shoe: E-2712 (7")
3 2 E-1304 1 Brake Shoe Roller REPLACES:
4 2 E-1305 1 Brake Shoe Roller Pin Wagner F33186
5 1 E-980 Brake Shoe Return Spring Dana/Spicer HK53
6 4 E-1269 Anchor Pin Seal
E-9039 MEGA PLUS EATON 15" x 8-5/8" "ES" "REDUCED ENVELOPE" DRIVE AXLE BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5477 Brake Shoe Roller For use with the following Brake
2 2 E-5478 Roller Retainer Shoe: E-9036 (8-5/8")
3 1 E-9038 Brake Shoe Return Spring REPLACES:
4 2 E-2767 Brake Shoe Retainer Eaton 815626
Spring Midland CQ66948
1-84
1
BRAKE REPAIR KITS
E-7238 STOPMATE PLUS BENDIX 16-1/2" TRUCK AND TRACTOR BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 4 NSS 1 Spring For use with the following Brake
2 4 E-747 Brake Shoe Spring Shoe: E-7236 (16-1/2")
Retainer REPLACES:
3 2 NSS 1 Return Spring Bendix 104624
Ford E6HZ2296A
Ford E8HZ2296A
1-85
BRAKE REPAIR KITS
E-9048 MEGA PLUS EATON 16-1/2" "ES" "SEVERE SERVICE" BRAKE WITH CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-9041 Anchor Pin For use with the following Brake
2 2 E-9042 Set Screw Shoe: E-9040 (7")
3 4 E-1113 Washer REPLACES:
4 4 E-801 Lock Ring Eaton 810213
5 4 E-9047 Brake Shoe Bushing Dana/Spicer HK72
6 2 E-919 Anchor Pin Bushing
7 2 E-9043 Brake Shoe Roller
8 2 E-9044 Brake Shoe Roller Pin
9 2 E-9045 Lock Pin Roll
10 1 E-9046 Brake Shoe Return Spring
E-9052 MEGA PLUS EATON 16-1/2" "ES" "SEVERE SERVICE" BRAKE WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-9050 1 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-9042 Set Screw use with the following Brake Shoe:
3 4 E-1113 Washer E-9049 (7")
4 4 E-801 Lock Ring REPLACES:
5 2 E-919 Anchor Pin Bushing Eaton 812118
6 2 E-11741 Brake Shoe Roller
7 2 E-5478 Roller Retainer
8 2 E-747 Brake Shoe Spring
Retainer
9 1 E-8907 Brake Shoe Return Spring
1-86
1
BRAKE REPAIR KITS
E-11319 STOPMATE PLUS EATON 16-1/2" "ES-II" "EXTENDED SERVICE" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10198 Retainer Spring For use with New "ES-II", No-Tab
2 1 E-10197 Return Spring Shoe with Retainer Spring holes in
web. IMPORTANT NOTE: Install
Retainer Springs with coil end up.
Can only be used with Eaton "ES"
Camshafts.
E-10760 MEGA PLUS EATON 16-1/2" "ES-II" "EXTENDED" SERVICE FRONT AXLE BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-10198 Retainer Spring For use with "ES-II" 16-1/2" front
2 2 E-9037 Brake Shoe Return Spring axle shoes: E-10270 (5"), E-10271
3 2 E-5477 Brake Shoe Roller (6"). Can only be used with Eaton
4 2 E-5478 Roller Retainer "ES" Camshafts. Must be used with
E-10761 Horse Collar.
REPLACES:
Eaton 314146
Dana/Spicer HK62XLS
1-87
BRAKE REPAIR KITS
E-1887ASHD STOPMATE PLUS EATON 16-1/2" SINGLE ANCHOR PIN BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1418 Brake Shoe Retainer Contains Special Alloy Steel
Spring Knurled Rollers. For use with the
2 1 E-1428S 1 Brake Shoe Return Spring following Brake Shoes: E-1777 (6"),
3 2 E-2217S Brake Shoe Roller E-1778 (7")
4 2 E-596A Brake Shoe Roller Pin REPLACES:
5 1 E-3887 Anti-Seize Compound Eaton 1001238
Dana/Spicer 24-1A
Dana/Spicer 24-1A-BULK
Dana/Spicer 24A
Dana/Spicer 24A-BULK
Volvo White GMC 3915454
Volvo White GMC 3947829
Eaton 52243
Trailmobile 700-7-237
Trailmobile 700-7-4
Fruehauf 8-1042
Wagner 911010
Hercules KIT#2
Fruehauf MBC-BK0030
Volvo White GMC R507002
Volvo White GMC R507002BK
Dana/Spicer TA241A
1-88
1
BRAKE REPAIR KITS
E-3801 MEGA PLUS EATON 16-1/2" SINGLE ANCHOR PIN BRAKE - FORD SPECIAL APPLICATION
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1418 Brake Shoe Retainer For use with the following High-
Spring Mount Brake Shoes: E-2474 (5"),
2 1 E-2475 Brake Shoe Return Spring E-9509 (6"), E-2819 (7"). Brake
3 2 E-2217A Brake Shoe Roller Shoe has offset Spring Retainer
4 2 E-596A Brake Shoe Roller Pin Pin. Used in some Ford
applications.
E-8923 MEGA PLUS EATON TOP SPEC 16-1/2" "ES" RETROFIT FOR FRUEHAUF BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3711 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-8938 Anchor Pin Bushing use with the following Brake Shoe:
3 2 E-2767 Brake Shoe Retainer E-8922 (7")
Spring REPLACES:
4 1 E-8907 Brake Shoe Return Spring Eaton 5-3321
5 2 E-11741 Brake Shoe Roller Volvo White GMC R507061
6 2 E-747 Brake Shoe Spring Dana/Spicer TA65A
Retainer
7 2 E-5478 Roller Retainer
8 1 E-1559 Cotter Pin
9 1 E-3887 Anti-Seize Compound
E-8925 MEGA PLUS EATON TOP SPEC 16-1/2" "ES" RETROFIT FOR MERITOR BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-8938 Anchor Pin Bushing use with the following Brake Shoe:
3 2 E-2767 Brake Shoe Retainer E-8924 (7")
Spring REPLACES:
4 1 E-8907 Brake Shoe Return Spring Eaton 5-3319
5 2 E-11741 Brake Shoe Roller Volvo White GMC R507062
6 2 E-747 Brake Shoe Spring Dana/Spicer TA67A
Retainer
7 2 E-5478 Roller Retainer
8 1 E-3887 Anti-Seize Compound
E-8925SHD STOPMATE PLUS EATON TOP SPEC 16-1/2" "ES" RETROFIT FOR MERITOR BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1893S 1 Anchor Pin Bushing Contains new Posi-Plus roller.
2 2 E-11741 Brake Shoe Roller
3 2 E-2766S Anchor Pin
4 2 E-2767 Brake Shoe Retainer
Spring
5 2 E-5478 Roller Retainer
6 2 E-747 Brake Shoe Spring
Retainer
7 1 E-8907 Brake Shoe Return Spring
1-89
BRAKE REPAIR KITS
E-2121 MEGA PLUS FRUEHAUF "PRO-PAR" 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-609 1 Anchor Pin For Old Style Spiders drilled for Roll
2 2 E-626 1 Roll Pin Pin. For New Style Spiders not
3 2 E-920 Anchor Pin Bushing drilled for Roll Pin, use Euclid Kits
4 2 E-3227 Roller Retainer E-1816HD, E-1816S or
5 2 E-11741 Brake Shoe Roller E-1816SHD. Contains new
6 1 E-545A Brake Shoe Return Spring Posi-Plus roller. For use with the
7 2 E-747 Brake Shoe Spring following Brake Shoe: E-2685 (7")
Retainer REPLACES:
Dana/Spicer 17-1A
Eaton 5-2240
Trailmobile 700-7-203
Wagner 911002
HDA A15P
Fruehauf ACC-001996-902
Dana/Spicer TA18A
1-90
1
BRAKE REPAIR KITS
E-4880S STOPMATE PLUS FRUEHAUF "PRO-PAR" 16-1/2" EARLY MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 1 E-3228 Brake Shoe Return Spring Contains new Posi-Plus roller. For
2 2 E-626 1 Roll Pin use with the following Brake Shoe:
3 2 E-747 Brake Shoe Spring E-5487 (7")
Retainer REPLACES:
4 2 E-920S Anchor Pin Bushing Dana/Spicer 31-1A
5 1 E-1559 Cotter Pin Eaton 5-2246
6 2 E-11741 Brake Shoe Roller Eaton 5-2246B
7 2 E-2773 Anchor Pin Wagner 911017
8 2 E-3007A Roller Retainer Fruehauf ACC-001996-903
9 2 E-2767 Brake Shoe Retainer
Spring
E-4880SHD STOPMATE PLUS FRUEHAUF "PRO-PAR" 16-1/2" EARLY MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 1 E-3490S Brake Shoe Return Spring Contains new Posi-Plus roller. For
2 2 E-626 1 Roll Pin use with the following Brake Shoe:
3 2 E-747 Brake Shoe Spring E-5487 (7"). Same as E-4880S
Retainer except has Heavy Duty Return
4 2 E-920S Anchor Pin Bushing Spring.
5 1 E-1559 Cotter Pin REPLACES:
6 2 E-11741 Brake Shoe Roller Trailmobile 700-7-202
7 2 E-2773 Anchor Pin Wagner 911018
8 2 E-3007A Roller Retainer Fruehauf ACC-001996-903
9 2 E-2767 Brake Shoe Retainer Fruehauf MBC-BK0011
Spring Fruehauf MBC-BK0012
E-3710HD MEGA PLUS FRUEHAUF "PRO-PAR" 16-1/2" LATE MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3711 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-8938 Anchor Pin Bushing use with the following Brake Shoes:
3 2 E-2767 Brake Shoe Retainer E-3920 (7"), E-3713 (8-5/8" LH),
Spring E-3714 (8-5/8" RH)
4 1 E-3490B 100 lb Return Spring REPLACES:
5 2 E-11741 Brake Shoe Roller Fruehauf ACC-001996-923
6 2 E-747 Brake Shoe Spring Dana/Spicer HK34SD
Retainer Dana/Spicer HK34XLS
7 2 E-3227 Roller Retainer Hercules KIT#3
8 1 E-1559 Cotter Pin
9 1 E-3887 Anti-Seize Compound
1-91
BRAKE REPAIR KITS
E-3710S STOPMATE PLUS FRUEHAUF "PRO-PAR" 16-1/2" LATE MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3711S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-1893S 1 Anchor Pin Bushing use with the following Brake Shoes:
3 2 E-2767 Brake Shoe Retainer E-3920 (7"), E-3713 (8-5/8" LH),
Spring E-3714 (8-5/8" RH)
4 1 E-3228 Brake Shoe Return Spring REPLACES:
5 2 E-11741 Brake Shoe Roller Dana/Spicer 34-1A
6 2 E-747 Brake Shoe Spring Volvo White GMC 3947831
Retainer Eaton 5-2247
7 2 E-3007A Roller Retainer Trailmobile 700-7-238
8 1 E-1559 Cotter Pin Wagner 911015
Fruehauf ACC-001996-923
Volvo White GMC R507008
Volvo White GMC R507008BK
E-3710SHD STOPMATE PLUS FRUEHAUF "PRO-PAR" 16-1/2" LATE MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3711S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-1893S 1 Anchor Pin Bushing use with the following Brake Shoes:
3 2 E-2767 Brake Shoe Retainer E-3920 (7"), E-3713 (8-5/8" LH),
Spring E-3714 (8-5/8" RH). Same as
4 1 E-3490S Brake Shoe Return Spring E-3710S except has Heavy Duty
5 2 E-11741 Brake Shoe Roller Return Spring.
6 2 E-747 Brake Shoe Spring REPLACES:
Retainer Dana/Spicer 34A
7 2 E-3007A Roller Retainer Dana/Spicer 34A-BULK
8 1 E-1559 Cotter Pin Volvo White GMC 3947832
Trailmobile 700-7-196
Wagner 911016
Fruehauf MBC-BK0010
Volvo White GMC R507010
Volvo White GMC R507010BK
Dana/Spicer TA341A
1-92
1
BRAKE REPAIR KITS
E-4515XHD STOPMATE FRUEHAUF "PROPAR" 16-1/2" LATE MODEL "XEM" BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Brake Shoe Anchor Pin Stopmate version of E-3710SHD
2 2 NSS 1 Anchor Pin Bushing REPLACES:
3 2 NSS 1 Spring Hercules KIT#3
4 1 NSS 1 Brake Shoe Return Spring
5 2 NSS 1 Roller
6 2 NSS 1 Brake Shoe Spring
Retainer
7 2 NSS 1 Retainer
KIT-5 MEGA PLUS FRUEHAUF (MODIFIED NO. 5) 16-1/2" EARLY MODEL BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-609 1 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-11741 Brake Shoe Roller use with the following Brake Shoe:
3 1 E-545A Brake Shoe Return Spring E-2685 (7")
4 2 E-3007A Roller Retainer REPLACES:
5 2 E-626 1 Roll Pin Eaton 5-2241
6 2 E-747 Brake Shoe Spring Trailmobile 700-7-158
Retainer HDA A5P
Fruehauf MBC-BK0014
E-9142 MEGA PLUS FRUEHAUF RETROFIT FOR MERITOR 16-1/2" "Q" BRAKES w/ECCENTRIC ANCHOR PIN
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-9061 Anchor Pin Special offset Anchor Pin allows use
2 2 E-920 Anchor Pin Bushing of Meritor "Q" Brake Shoes on
3 2 E-747 Brake Shoe Spring Fruehauf "Pro-Par" Axles. Contains
Retainer new Posi-Plus roller. For use with
4 2 E-626 1 Roll Pin the following Brake Shoe: E-2778
5 1 E-1559 Cotter Pin (7")
6 2 E-11741 Brake Shoe Roller
7 2 E-3007A Roller Retainer
8 1 E-2768 Brake Shoe Return Spring
9 2 E-2767 Brake Shoe Retainer
Spring
1-93
BRAKE REPAIR KITS
E-4515QHD STOPMATE HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 NSS 1 Anchor Pin Bushing (Dana) "Fast Change" and "XLII",
3 2 NSS 1 Retainer Spring and Hendrickson "Intraax" Brakes.
4 1 NSS 1 Brake Shoe Return Spring Stopmate version of E-2769SHD.
5 2 NSS 1 Roller REPLACES:
6 2 NSS 1 Brake Shoe Spring Dana/Spicer 29-1AR
Retainer Hercules KIT#1
7 2 NSS 1 Roller Retainer Hendrickson S21183
Hendrickson S23752
1-94
1
BRAKE REPAIR KITS
E-2769HD MEGA PLUS HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 E-8938 Anchor Pin Bushing (Dana) "Fast Change" and "XLII",
3 2 E-2767 Brake Shoe Retainer and Hendrickson "Intraax" brakes.
Spring Contains new Posi-Plus roller. For
4 1 E-3490B 100 lb Return Spring use with the following Brake Shoes:
5 2 E-11741 Brake Shoe Roller E-3303 (5"), E-3304 (6"), E-2778
6 2 E-747 Brake Shoe Spring (7"), E-6075 (7"), E-3522 (8-5/8"),
Retainer E-3417 (10"). Note: To insure quick
7 2 E-3007A Roller Retainer brake release and full lining life, "Q
8 1 E-3887 Anti-Seize Compound Plus" brakes use only heavy-duty
return springs.
REPLACES:
Dana/Spicer 28A
Dana/Spicer 29A
Dana/Spicer HK29-BULK
Dana/Spicer HK29SD
Dexter K71-136-00
Meritor KIT8000
Meritor KIT8000BK
Meritor KIT8000BULK
Meritor KIT8000HD
Meritor KIT8000HDBK
Meritor KIT8000HDBULK
Hendrickson S23752
E-2769S STOPMATE PLUS HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 E-1893S 1 Anchor Pin Bushing (Dana) "Fast Change" and "XLII",
3 2 E-2767 Brake Shoe Retainer and Hendrickson "Intraax" brakes.
Spring Contains new Posi-Plus roller. For
4 1 E-2768 Brake Shoe Return Spring use with the following Brake Shoes:
5 2 E-11741 Brake Shoe Roller E-3303 (5"), E-3304 (6"), E-2778
6 2 E-747 Brake Shoe Spring (7"), E-6075 (7"), E-3522 (8-5/8"),
Retainer E-3417 (10"). Note: To insure quick
7 2 E-3007A Roller Retainer brake release and full lining life, "Q
Plus" brakes use only heavy-duty
return springs.
REPLACES:
Dana/Spicer 28-1A
Dana/Spicer 28-1A-BULK
Dana/Spicer 28-1AR
Dana/Spicer 28-1AR-BULK
Volvo White GMC 3947834
Eaton 5-2245
Midland 66861
Trailmobile 700-17-259
Trailmobile 700-7-235
Wagner 911005
Meritor KIT8000
Meritor KIT8000A
Meritor KIT8000BK
Fruehauf MBC-BK0020
Volvo White GMC R508000
Volvo White GMC R508000BK
1-95
BRAKE REPAIR KITS
E-2769SHD STOPMATE PLUS HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 E-1893S 1 Anchor Pin Bushing (Dana) "Fast Change" and "XLII",
3 2 E-2767 Brake Shoe Retainer and Hendrickson "Intraax" brakes.
Spring Contains new Posi-Plus roller.
4 1 E-3490S Brake Shoe Return Spring Same as E-2769S except has
5 2 E-11741 Brake Shoe Roller Heavy Duty Return Spring. For use
6 2 E-747 Brake Shoe Spring with the following Brake Shoes:
Retainer E-3303 (5"), E-3304 (6"), E-2778
7 2 E-3007A Roller Retainer (7"), E-6075 (7"), E-3522 (8-5/8"),
E-3417 (10"). Note: To insure quick
brake release and full lining life,
"Q Plus" brakes use only
heavy-duty return springs.
REPLACES:
Dana/Spicer 29-1A
Dana/Spicer 29-1A-BULK
Volvo White GMC 3947835
Trailmobile 700-7-199
Trailmobile 700-7-239
Wagner 911007
Meritor KIT8000HD
Meritor KIT8000HDBK
Volvo White GMC R508001
Volvo White GMC R508001BK
Hendrickson S21183
Dana/Spicer TA291A
E-6999S STOPMATE PLUS HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 E-2767 Brake Shoe Retainer (Dana) "Fast Change" and "XLII",
Spring and Hendrickson "Intraax" brakes.
3 1 E-2768 Brake Shoe Return Spring Same as E-2769S minus Bushings.
4 2 E-11741 Brake Shoe Roller Contains new Posi-Plus roller. For
5 2 E-747 Brake Shoe Spring use with the following Brake Shoes:
Retainer E-3303 (5"), E-3304 (6"), E-2778
6 2 E-3007A Roller Retainer (7"), E-6075 (7"), E-3522 (8-5/8"),
E-3417 (10").
REPLACES:
Dana/Spicer 30A
Dana/Spicer 30AR
Volvo White GMC 3947836
Meritor KIT8000MB
Meritor KIT8000MBA
Meritor KIT8000MBBK
Meritor KIT8000MBBULK
Volvo White GMC R508002
Volvo White GMC R508002BK
1-96
1
BRAKE REPAIR KITS
E-6999SHD STOPMATE PLUS HENDRICKSON, MERITOR and SPICER (DANA) 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin For Meritor "Q" and "Q Plus", Spicer
2 2 E-2767 Brake Shoe Retainer (Dana) "Fast Change" and "XLII",
Spring and Hendrickson "Intraax" brakes.
3 1 E-3490S Brake Shoe Return Spring Same as E-2769S minus Bushings.
4 2 E-11741 Brake Shoe Roller Same as E-6999S except has
5 2 E-747 Brake Shoe Spring Heavy Duty Return Spring. Contains
Retainer new Posi-Plus roller. For use with
6 2 E-3007A Roller Retainer the following Brake Shoes: E-3303
(5"), E-3304 (6"), E-2778 (7"),
E-6075 (7"), E-3522 (8-5/8"),
E-3417 (10").
REPLACES:
Volvo White GMC 3947837
Meritor KIT8000MBHD
Meritor KIT8000MBHDBK
Volvo White GMC R508003
Volvo White GMC R508003BK
E-5086 MEGA PLUS MACK WITH MERITOR 16-1/2" "Q" BRAKE WITH 50,000 LB. REAR AXLE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-5087 Anchor Pin For use with the following Brake
2 2 E-8938 Anchor Pin Bushing Shoe: E-5092 (7")
3 2 E-5088 Retainer Spring REPLACES:
4 1 E-3490B 100 lb Return Spring Meritor KIT8026HD
5 2 E-5089 Brake Shoe Roller Dana/Spicer TA82A
6 2 E-3007A Roller Retainer
7 2 E-747 Brake Shoe Spring
Retainer
8 2 E-5090 1 Retainer Pin Spring
9 2 E-5091 1 Lock Ring
10 1 E-3887 Anti-Seize Compound
1-97
BRAKE REPAIR KITS
E-3858 MEGA PLUS MACK WITH MERITOR 16-1/2" "Q" SERIES FRONT BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-1893 Anchor Pin Bushing use with the following Brake Shoes:
3 2 E-2767 Brake Shoe Retainer E-3823 (5"), E-9780 (6"). Double
Spring Web "Q" Brake Shoe used on Mack
4 1 E-3824 Brake Shoe Return Spring Front Axles
5 2 E-11741 Brake Shoe Roller REPLACES:
6 2 E-747 Brake Shoe Spring Dana/Spicer 81A
Retainer Dana/Spicer HK81XLS
7 2 E-3007A Roller Retainer Meritor KIT8053
Meritor KIT8081
KIT-4HD MEGA PLUS MERITOR 16-1/2" "P" SERIES and STD. FORGE EARLY MODEL BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-512 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-11741 Brake Shoe Roller use with the following Brake Shoes:
3 1 E-1880B Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
4 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
5 4 E-801 Lock Ring E-5239 (8-5/8"), E-2496 (10")
6 2 E-579A Anchor Pin Lock Screw REPLACES:
7 4 E-1269 Anchor Pin Seal Dana/Spicer HK16
8 2 E-747 Brake Shoe Spring Dana/Spicer HK16XLS
Retainer Meritor KIT9002
9 1 E-3887 Anti-Seize Compound Meritor KIT9002N
Meritor KIT9017
Meritor KIT9017N
Meritor KIT9017NC
Meritor KIT9063
Meritor KIT9063BK
Meritor KIT9063BULK
Meritor KIT9063N
Meritor KIT9063NBK
Dana/Spicer TA23A
1-98
1
BRAKE REPAIR KITS
KIT-4S STOPMATE PLUS MERITOR 16-1/2" "P" SERIES and STD. FORGE EARLY MODEL BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-512 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-11741 Brake Shoe Roller use with the following Brake Shoes:
3 1 E-545A Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
4 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
5 4 E-801 Lock Ring E-5239 (8-5/8"), E-2496 (10")
6 2 E-579A Anchor Pin Lock Screw REPLACES:
7 4 E-1269 Anchor Pin Seal Dana/Spicer 16-3A
8 2 E-747 Brake Shoe Spring Dana/Spicer 16-4A
Retainer Dana/Spicer 16-4A-BULK
Dana/Spicer 163A
Dana/Spicer 164A
Dana/Spicer 164ABULK
Eaton 5-2236
Eaton 5-2236B
Wagner 911000
Midland CQ67315
Meritor KIT9002
Meritor KIT9002N
Meritor KIT9017
Meritor KIT9017N
Meritor KIT9017NBK
Meritor KIT9017NBULK
Meritor KIT9017NC
Trailmobile RW-KIT9017N
Dana/Spicer TA23A
KIT-4SHD STOPMATE PLUS MERITOR 16-1/2" "P" SERIES and STD. FORGE EARLY MODEL BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-512S 1 Anchor Pin Contains new Posi-Plus roller. For
2 2 E-11741 Brake Shoe Roller use with the following Brake Shoes:
3 1 E-1880S 1 Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
4 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
5 4 E-801 Lock Ring E-5239 (8-5/8"), E-2496 (10").
6 2 E-579A Anchor Pin Lock Screw Same as KIT-4S except has Heavy
7 4 E-1269 Anchor Pin Seal Duty Return Spring.
8 2 E-747 Brake Shoe Spring REPLACES:
Retainer Dana/Spicer 16-1A
Dana/Spicer 161A
Dana/Spicer 16A
Dana/Spicer 16A-BULK
Dana/Spicer 16ABULK
Eaton 5-2237
Eaton 5-2237B
Trailmobile 700-7-200
Wagner 911003
Meritor KIT9017NHD
Meritor KIT9017NHDBK
Fruehauf MBC-BK0027
1-99
BRAKE REPAIR KITS
E-9070 MEGA PLUS MERITOR 16-1/2" "Q" BRAKE WITH "FL" SERIES FRONT AXLES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2766S Anchor Pin Contains new Posi-Plus roller. For
2 2 E-1893 Anchor Pin Bushing use with the following Brake Shoes:
3 2 E-2767 Brake Shoe Retainer E-3303 (5"), E-3823 (5"),
Spring E-3304 (6")
4 1 E-9069 Brake Shoe Return Spring REPLACES:
5 2 E-11741 Brake Shoe Roller Dana/Spicer HK80XLS
6 2 E-747 Brake Shoe Spring Meritor KIT8037
Retainer
7 2 E-3007A Roller Retainer
E-1607HD MEGA PLUS MERITOR 16-1/2" BRAKE SHOES WITH REINFORCED ANCHOR BOSSES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-502 Anchor Pin Contains new Posi-Plus roller.
2 2 E-11741 Brake Shoe Roller REPLACES:
3 1 E-1880B Brake Shoe Return Spring Dana/Spicer 192A
4 2 E-3007A Roller Retainer Wagner 911008
5 4 E-1269 Anchor Pin Seal Meritor KIT9004
6 4 E-801 Lock Ring Meritor KIT9409
7 2 E-579A Anchor Pin Lock Screw Dana/Spicer M16LK104X
8 2 E-747 Brake Shoe Spring Dana/Spicer TA192A
Retainer
9 1 E-3887 Anti-Seize Compound
1-100
1
BRAKE REPAIR KITS
KIT-1 MEGA PLUS MERITOR and STD. FORGE 16-1/2" BRAKE WITH CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-502 Anchor Pin For use with the following Brake
2 2 E-501 Brake Shoe Roller Pin Shoes: E-601 (7"), E-1384 (7")
3 2 E-2176 Brake Shoe Roller REPLACES:
4 1 E-544 Brake Shoe Return Spring Dana/Spicer 22A
5 4 E-541 Brake Shoe Bushing Dana/Spicer 43A
6 4 E-563 Anchor Pin Felt Retainer Eaton 52244
7 4 E-801 Lock Ring Dana/Spicer M16LK100X
8 2 E-773 Roller Pin Set Screw Dana/Spicer TA43A
9 2 E-579A Anchor Pin Lock Screw
10 4 E-1426 Anchor Pin Seal
1-101
BRAKE REPAIR KITS
E-3895SHD STOPMATE PLUS UNIVERSAL 16-1/2" QUICK CHANGE SERIES BRAKE
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2767 Brake Shoe Retainer Contains new Posi-Plus roller. For
Spring use with all Meritor "Q" Brake
2 1 E-3490S Brake Shoe Return Spring Shoes. Can also be used for all
3 2 E-11741 Brake Shoe Roller Fruehauf "XEM" and Spicer "Fast
4 2 E-747 Brake Shoe Spring Change" Shoes. Same as E-3895S
Retainer except has Heavy Duty Return
5 2 E-539 Roller Retainer Spring.
REPLACES:
Volvo White GMC 3947839
Dana/Spicer HK74XLS
Meritor KIT8014HD
Volvo White GMC R508015
Volvo White GMC R508015BK
E-1816HDMB MEGA PLUS UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1112A Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 E-801 Lock Ring (Dana) and Std. Forge Brakes.
3 2 E-11741 Brake Shoe Roller Contains new Posi-Plus roller. Use
4 1 E-1880B Brake Shoe Return Spring with the following Brake Shoes:
5 2 E-3007A Roller Retainer E-2686 (4"), E-2687 (5"), E-3418
6 2 E-747 Brake Shoe Spring (5"), E-2684 (6"), E-2241 (7"),
Retainer E-2685 (7"), E-5239 (8-5/8" ),
7 1 E-3887 Anti-Seize Compound E-2496 (10"). Same as E-1816S
except has Heavy Duty Return
Spring
1-102
1
BRAKE REPAIR KITS
E-1816S STOPMATE PLUS UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1112A Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 E-1113 Washer (Dana) and Std. Forge Brakes.
3 4 E-801 Lock Ring Contains new Posi-Plus roller. For
4 2 E-11741 Brake Shoe Roller use with the following Brake Shoes:
5 1 E-545A Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
6 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
7 2 E-1893S 1 Anchor Pin Bushing E-2685 (7"), E-5239 (8-5/8"),
8 2 E-747 Brake Shoe Spring E-2496 (10")
Retainer REPLACES:
Dana/Spicer 14-3A
Dana/Spicer 14-3A-BULK
Dana/Spicer 163A
Volvo White GMC 3947841
Eaton 5-2238
Trailmobile 700-17-290
Wagner 911019
Std. Forge BK103
Meritor KIT9000
Dana/Spicer M16LK103X
Volvo White GMC R509000
Volvo White GMC R509000BK
E-1816SHD STOPMATE PLUS UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1112A Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 E-1113 Washer (Dana) and Std. Forge Brakes.
3 4 E-801 Lock Ring Contains new Posi-Plus roller. For
4 2 E-11741 Brake Shoe Roller use with the following Brake Shoes:
5 1 E-1880S 1 Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
6 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
7 2 E-1893S 1 Anchor Pin Bushing E-2685 (7"), E-5239 (8-5/8"),
8 2 E-747 Brake Shoe Spring E-2496 (10")
Retainer REPLACES:
Dana/Spicer 14-4A
Dana/Spicer 14-4A-BULK
Volvo White GMC 3947842
Eaton 5-2239
Trailmobile 700-7-201
Wagner 911020
Meritor KIT9001
Fruehauf MBC-BK0022
Volvo White GMC R509001
Volvo White GMC R509001BK
Dana/Spicer TA144A
Dana/Spicer TA14A
1-103
BRAKE REPAIR KITS
E-1816HD MEGA PLUS UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-1112A Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 E-1113 Washer (Dana) and Std. Forge Brakes.
3 4 E-801 Lock Ring Contains new Posi-Plus roller. Use
4 2 E-11741 Brake Shoe Roller with the following Brake Shoes:
5 1 E-1880B Brake Shoe Return Spring E-2686 (4"), E-2687 (5"), E-3418
6 2 E-3007A Roller Retainer (5"), E-2684 (6"), E-2241 (7"),
7 2 E-8938 Anchor Pin Bushing E-2685 (7"), E-5239 (8-5/8" ),
8 2 E-747 Brake Shoe Spring E-2496 (10"). Same as E-1816S
Retainer except has Heavy Duty Return
9 1 E-3887 Anti-Seize Compound Spring
REPLACES:
Dana/Spicer 14-2A
Dana/Spicer 14A
Meritor KIT9000
Meritor KIT9001
Dana/Spicer M16LK103X
E-4515P STOPMATE UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Brake Shoe Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 NSS 1 Washer (Dana) and Std. Forge brakes.
3 4 NSS 1 Ring Clip Stopmate version of E-1816S.
4 2 NSS 1 Roller REPLACES:
5 1 NSS 1 Brake Shoe Return Spring Haldex 67317
6 2 NSS 1 Roller Retainer Haldex CQ67317
7 2 NSS 1 Anchor Pin Bushing
8 2 NSS 1 Brake Shoe Spring
Retainer
E-4515PHD STOPMATE UNIVERSAL KIT w/"FREE-FLOATING" ANCHOR PIN FOR 16-1/2" BRAKES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 NSS 1 Brake Shoe Anchor Pin For Eaton, Fruehauf, Meritor, Spicer
2 4 NSS 1 Washer (Dana) and Std. Forge brakes.
3 4 NSS 1 Ring Clip Stopmate version of E-1816SHD.
4 2 NSS 1 Roller REPLACES:
5 1 NSS 1 Brake Shoe Return Spring Haldex 66735
6 2 NSS 1 Roller Retainer
7 2 NSS 1 Anchor Pin Bushing
8 2 NSS 1 Brake Shoe Spring
Retainer
1-104
1
BRAKE REPAIR KITS
E-2821 MEGA PLUS EATON 18" SINGLE ANCHOR PIN BRAKE WITH CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-2805 Brake Shoe Retainer For use with the following Brake
Spring Shoe: E-2801 (7")
2 1 E-2804 Brake Shoe Return Spring REPLACES:
3 2 E-2802 Brake Shoe Roller Eaton 1005006
4 2 E-2803 Brake Shoe Roller Pin Dana/Spicer 26A
E-3992 MEGA PLUS MERITOR 18" WITH NEW STYLE CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3511 Brake Shoe Roller For use with the following Brake
2 1 E-543 Brake Shoe Return Spring Shoe: E-4902 (7")
3 2 E-502 Anchor Pin REPLACES:
4 4 E-1269 Anchor Pin Seal Meritor KIT9408
5 4 E-801 Lock Ring
6 2 E-579A Anchor Pin Lock Screw
7 2 E-919 Anchor Pin Bushing
8 4 E-2218 Brake Shoe Bushing
E-3518 MEGA PLUS MERITOR 18" WITH OLD STYLE CAST SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-3511 Brake Shoe Roller For use with the following Brake
2 2 E-3513 Brake Shoe Retainer Shoe: E-4902 (7")
3 1 E-3512 Brake Shoe Return Spring REPLACES:
4 2 E-502 Anchor Pin Dana/Spicer HK68
5 4 E-801 Lock Ring Meritor KIT9179
6 2 E-579A Anchor Pin Lock Screw Dana/Spicer TA68A
7 4 E-1269 Anchor Pin Seal
8 4 E-2218 Brake Shoe Bushing
1-105
BRAKE REPAIR KITS
E-5499 MEGA PLUS SPICER (STD. FORGE) 18" BRAKES WITH FABRICATED SHOES
APPLICATION & GENERAL
ITEM QTY. EUCLID NO. DESCRIPTION INFORMATION
1 2 E-512S 1 Anchor Pin For use with the following Brake
2 4 E-801 Lock Ring Shoe: E-5500 (7")
3 4 E-1269 Anchor Pin Seal REPLACES:
4 2 E-747 Brake Shoe Spring Dana/Spicer 27A
Retainer
5 1 E-1880B Brake Shoe Return Spring
6 2 E-2395 Brake Shoe Roller
7 2 E-2396 Brake Shoe Roller Pin
8 2 E-527 Roller Pin Retainer
1-106
1
BRAKE SHOE ROLLERS
"POSI-PLUS" DIAMOND KNURLED BRAKE SHOE ROLLER - For Fabricated Brake Shoes
LENGTH
EUCLID OVERALL OF LARGE APPLICATION AND
NO. LENGTH DIA. O.D. REPLACES GENERAL INFORMATION
E-11741 2-1/4" 1-5/16" 1-1/4" 2297-T-7222 (not knurled) Heat Treat: carburized &
harden. Zinc Plate and Clear
Chromate
"POSI-ROLL" DIAMOND KNURLED BRAKE SHOE ROLLERS - For Fabricated Brake Shoes
LENGTH
EUCLID OVERALL OF LARGE APPLICATION AND
NO. LENGTH DIA. O.D. REPLACES GENERAL INFORMATION
E-5477 2-5/32" 1-1/4" 1-1/4" Eaton 2-806234 For Eaton 16-1/2" "ES" Brake.
Zinc Yellow Dichromate
E-2177 2-7/32" 1-9/32" 1-1/4" Meritor 1779R18 Same application as E-523.
Eaton 2-2107
Std. Forge 204101-001
GMC 2295551
Diamond T 26282
Fruehauf 330733
Holland Hitch 330733X
Dana/Spicer M16WJ104
E-2215 2-7/32" 1-9/32" 1-3/8" Meritor 1779C81 1/8" Oversize of E-2177.
E-3914 1 2-17/64" 1-1/2" 1-5/8" Meritor 1199A3719 Same application as E-2672.
1-107
BRAKE SHOE ROLLERS
BRAKE SHOE ROLLERS - For Fabricated Brake Shoes
LENGTH
EUCLID OVERALL OF LARGE APPLICATION AND GENERAL
NO. LENGTH DIA. O.D. REPLACES INFORMATION
E-10823 2-19/64" 1-1/2" 1-15/64" Meritor 1779X180 For Meritor 14-/2" x 8" and 10"
"W" Series.
E-5089 2-21/64" 1-5/16" 1-5/8" Meritor 2247X128 For Mack with Meritor 50,000 lb.
Drive Axle.
E-10838 2-41/64" 1-25/64" 1-1/2" Meritor 1779L116 For Meritor 14-1/2" x 10" "W"
Series, Type 2.
E-10824 2-41/64" 1-1/2" 1-17/64" Meritor 1779U593 For Meritor 14-1/2" x 8" and 10"
"W" Series Type 1 and Type 3.
1-108
1
BRAKE SHOE ROLLERS
EUCLID OVERALL EUCLID APPLICATION AND
NO. LENGTH O.D. I.D.
PIN NO. REPLACES GENERAL INFORMATION
E-500 1" 1-1/4" 3/4"E-501 Dana/Spicer 11509
Meritor 1199A625
Fruehauf 219300
ACF Brill 280185
Twin Coach 3-106-53
Trailmobile 37825
Eaton B-1220
Dana/Spicer M10HD100
E-505 1" 1-3/8" 3/4" E-501 Meritor 1199J3910
Meritor 1199M637
Twin Coach 3-106-54
E-504 1" 1-1/2" 3/4" E-501 Meritor 1199K3911
Meritor 1199Z910
Std. Forge 204104
Eaton B-1969
Dana/Spicer M10WJ165
E-9043 1-1/8" 1-1/4" 3/4" E-9044 Eaton 807931
E-2802 1-1/4" 1-5/8" 15/16" E-2803 Eaton 1003831
Eaton 2-3688
Eaton 653087
E-1304 1 1-11/32" 1-5/8" 29/32" E-1305
E-501 3/4" 2-1/4" Meritor 1246G475 Full Circle Groove for Faster
Meritor 1246S227 Alignment and Installation.
Diamond T 16282M Use with E-2176, E-2111A,
Diamond T 16283M E-2214 Rollers
Std. Forge 205100-001
ACF Brill 247243
Twin Coach 3-106-52
Trailmobile 37096
Eaton B-1219
Dana/Spicer M10SS100
E-2396 3/4" 2-1/4" Std. Forge 205107-001 Use with E-2395 Roller and
Eaton 22261 E-527 Retainer
Dana/Spicer M10WJ116
E-3482 3/4" 2-13/32" Meritor 1246C627 For Meritor 12-1/4" Dia. "Q"
Meritor 1246F1020 Brake. Use with E-527
Retainer
E-596A 59/64" 1-25/32" 23/32" Eaton 039075 For Late Model Eaton Axles.
Eaton 2-2260 Use with E-2217A Roller.
Also used for Cast Shoes
1-109
BRAKE SHOE ROLLER PINS
EUCLID APPLICATION AND
NO. O.D. LENGTH "A" REPLACES GENERAL INFORMATION
E-2803 59/64" 2-5/32" 1-1/4" Eaton 1000382 For Eaton 18" x 7" Cast
Eaton 1003832 Brake Shoes. Use with
E-2802 Roller
E-947 1 2-1/16" 1-5/8" 3/8" Std. Forge 206100-001 Available only in Brake Kit
Std. Forge UB-3012 E-1812
XpresswayPlus.com
1-110
1
BRAKE SHOE ANCHOR PINS
O.D.
EUCLID NO. REPLACES LENGTH O.D. Large - Small APPLICATION
E-2766 Meritor 1259N274 2-7/32" 1-1/4" - 1" Meritor "Q" Brake and Spicer
Eaton 2-2130 "Fast Change" Brake. Zinc
Dana/Spicer M16WJ105 Clear Chromate Plated
E-5304 Std. Forge 203113-001 2-1/4" 1" For Spicer (Dana) 12-1/4"
Dana/Spicer M10WJ151 "U" Brake. Use with E-5305
Retainer Spring. Zinc Clear
Chromate Plated
E-5087 Meritor 1259V308 2-11/32" 1-1/4" - 1" Meritor Mack "Q" Brake. Zinc
Clear Chromate Plated
E-3711 Eaton 2-2132 2-3/8" 1-1/4" - 1-1/16" Late Model Fruehauf "XEM"
Holland Hitch A-CF3378-1 Brake. Zinc Yellow Plated
Fruehauf ACF-003378-001
E-3711S 2-3/8" 1-1/4" - 1-1/16" Late Model Fruehauf "XEM"
Brake. Zinc Clear Plated
E-9061 Eaton ACF-002668-00X 2-3/8" 1-1/4" - 1" Offset to allow use of E-2778
"Q" Brake Shoes with
"Pro-Par" Axle Spiders. Black
Finish
E-2773 Eaton 2-2131 2-3/8" 1-1/4" Early Model Fruehauf "XEM"
Fruehauf ACE-009909-001 Brake. Zinc Clear Chromate
Plated
1-111
BRAKE SHOE ANCHOR PINS
O.D.
EUCLID NO. REPLACES LENGTH O.D. Large - Small APPLICATION
E-10835 Meritor 1259L194 3-7/16" 1-1/4" For "W" Series with Lube
Holes.
1-112
1
BRAKE SHOE ANCHOR PINS
O.D.
EUCLID NO. REPLACES LENGTH O.D. Large - Small APPLICATION
E-2029 Std. Forge 203105-003 6-9/32" 1" For Spicer 12-1/4" Dia.
Dana/Spicer M10HP103 Brakes. Zinc Clear Chromate
Plated
E-10825 Meritor 1259P198 6-7/8" 1-1/4" For "W" Series with Lube
Holes.
HEAD
EUCLID NO. REPLACES LENGTH O.D. "A"DIA. APPLICATION
E-3870 1 Meritor 1259X1012 2-11/16" 13/16" 1-1/4" For Meritor 15" x 4" Front
"Q" Brake. Black Finish
E-3424 1 Meritor 1259B262 2-3/4" 13/16" 17/32" 1-1/4" For Meritor "T" Series 15"
Dana/Spicer 15550 x 3-1/2" and 15" x 4" Type
1 and 2 Brakes. Available
only in Brake Kit E-4691.
Zinc Clear Chromate
Plated
E-3445 Dana/Spicer 15554 3-5/16" 13/16" 7/8" Eccentric Pin. For Meritor
Meritor 1759Z26 "T" Series 16-1/4" x 3-1/2"
Brake. Zinc Clear
Chromate Plated
E-2798 1 Wagner 80414 3-5/16" 1-3/16" 1/2" 1-3/8" For 15" x 4" with Wagner
Wagner F80414 Brakes. Use with E-4961A
Nut and E-2723 Snap
Ring. Available only in
Brake Kit E-3291. Zinc
Clear Chromate Plated
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
DIM.
BETWEEN APPLICATION AND
EUCLID LEG GENERAL
NO. O.D. I.D. THICK OPENING HEIGHT REPLACES INFORMATION
E-1106 5/8" 1-11/32" Dana/Spicer 11527 Anchor Pin Lock
Meritor 1229M221 Washer for Std. Forge
Std. Forge 403104 12-1/4" Dia. Trailer
Dana/Spicer M10HN154 Brakes and Meritor
16-1/4" "T" Series
Steering Axle Brake
E-671 1 1-11/16" 1-1/4" 17/32" Eaton M1561 Anchor Pin Felt
Retainer for use with
E-521 and E-608
Anchor Pins.
Available only in
Brake Kit E-2676
1-113
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
DIM.
BETWEEN APPLICATION AND
EUCLID LEG GENERAL
NO. O.D. I.D. THICK OPENING HEIGHT REPLACES INFORMATION
E-563 1-3/4" 1-1/4" 1/8" Clark 109439 Anchor Pin Felt
Dana/Spicer 11005 Retainer for use with
Meritor 1205K193 E-537 Felt
Fruehauf 219296
Trailmobile 37090
Twin Coach 4-105-82
Std. Forge 403101
Eaton B-1211
Dana/Spicer M10HN153
APPLICATION AND
EUCLID NO. I.D. THICK REPLACES GENERAL INFORMATION
E-527 3/4" Meritor 1229M1105 Lock Ring for use with Eaton
Meritor 1229T3166 16-1/2" Dia. Fabricated Steel
Navistar 138808R2 Shoes and Std. Forge 12-1/4"
Eaton 2-2136 Fabricated Steel Shoes
Std. Forge 214102
Fruehauf 253395
Eaton 820063
Eaton B-1661
Dana/Spicer M10HR102
1-114
1
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
APPLICATION AND
EUCLID NO. I.D. THICK REPLACES GENERAL INFORMATION
E-801 1-1/8" Meritor 1229X1116 Lock Ring. For Meritor
Eaton 2-2137 4000-6000 Series Axles. Also
Eaton 2-807929 used on 1-1/4" Anchor Pins
Std. Forge 214100 with grooves.
Dana/Spicer 31624
Eaton 820007
Eaton B-1214
Wagner FC031961
E-10834 1-1/8" Meritor 1218Z52 Lock Ring
HOLE
CTR. TO
EUCLID OVERALL HOLE HOLE APPLICATION AND
NO. LENGTH CTR. DIA. THICK REPLACES GENERAL INFORMATION
E-2401 3-1/2" 1-15/16" 3/16" Std. Forge 999197 Anchor Pin Link for Early
Dana/Spicer M10HR105 Model Std. Forge 12-1/4"
Dia. Trailer Brakes with
New Style Fabricated Steel
Shoe
E-3871 4" 2-5/16" 15/16" Meritor 2205P1004 Anchor Pin Link for 15" x 4"
"Q" Brakes
E-10829 4-3/4" 2-1/2" 3/4" Meritor 1245E161 Anchor Pin Retainer Plate
for Meritor "W" Series
14-1/2" x 10" Coach Brakes
1-115
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
EUCLID APPLICATION AND
NO. THREAD HEX HIGH REPLACES GENERAL INFORMATION
E-4961A 3/4"-16 1-1/16" 2-1/32" Dana/Spicer 341551 Lock Nut for Meritor 15" x
Budd 41073-7 3-1/2" and 4" T Series
Budd 47693-7 Brakes.
Webb 75716
Motor Wheel 82700
Fruehauf MWC-X01068
Meritor N1121
Meritor NL1121
NWRA X-1068
E-1107 3/4"-16 1-1/8" 27/64" Dana/Spicer 12052 Jam nut. Use with E-1814,
Trailmobile 37338 E-2029 or E-2414 Anchor
Trailmobile 37703 Pins
Std. Forge 402101
Dana/Spicer 500371-8
E-937 1"-14 1-7/16" 7/8" Eaton 44672E Lock Nut for use with E-1403
Eaton 821616 Anchor Pin and E-3975
Fruehauf FSP-006-02-009 Lockwasher
Fruehauf FSP-006-02-PK9
Fruehauf MHS-010562
Fruehauf MRM-0T5495
Fruehauf MRM-T5495D
Fruehauf MRM-T5495S
E-539 Dana/Spicer 11229 Brake Shoe Roller Retainer for use with
Meritor 1718Y103 E-523, E-586, E-598,E-781, E-2177,
Eaton 2-2111 E-2215 Brake Shoe Rollers
Std. Forge 214103
Fruehauf 330734
Trailmobile 39647
Dana/Spicer M16WJ103
1-116
1
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
APPLICATION AND
EUCLID NO. CLIP OPENING REPLACES GENERAL INFORMATION
E-5124 11/16" Eaton 1006500 Shoe Hold Down Spring for
Eaton 15" x 4" front brakes with
1-1/2" offset spider
E-5125 1-7/16" Eaton 1006534 Shoe Hold Down Spring for
Eaton 15" x 4" front brakes with
2" offset spider
APPLICATION AND
EUCLID NO. O.D. LENGTH REPLACES GENERAL INFORMATION
E-9045 3/16" 1-1/4" Eaton 810530 Roll Pin Lock for use with
E-9044 Brake Shoe Roller Pin
APPLICATION AND
EUCLID NO. LENGTH REPLACES GENERAL INFORMATION
E-4078 1-1/16" Eaton 804286 Rubber Dust Cover for Eaton
Bendix H1456 15" x 4" Front Brakes
APPLICATION AND
EUCLID NO. THREAD LENGTH REPLACES GENERAL INFORMATION
E-773 1/4"-20 1/4" Fruehauf 102570 Roller Pin Set Screw
Meritor 1199B626
Dana/Spicer 12200
Std. Forge 400101
Eaton B-1217
Meritor S843
E-9042 5/16"-24 5/8" Eaton 810392 Anchor Pin Lock Screw for use
with E-9041and E-9050 Anchor
Pins
E-579A 3/8"-16 5/16" Eaton 2-2139 Anchor Pin Lock Screw used on
Fruehauf 219297 Both Tractor and Trailer
Fruehauf 254253 Spiders to Lock Anchor Pin in
Std. Forge 400103 place
Eaton B-1213
Dana/Spicer M10HM130
Meritor S265D
1-117
BRAKE HARDWARE - For Brake Anchor Pins, Rollers and Roller Pins
EUCLID APPLICATION AND
NO. O.D. I.D. THICK REPLACES GENERAL INFORMATION
E-2724 13/16" 1/4" 1/16" Meritor 1829P198 Guide Washer for Wagner 15"
Wagner F18788 x 3", 3-1/2" and 4" Diameter
Wagner FC018788 Air Brake
E-10817 1-47/64" x 11/32" 3/16" Meritor 1229D108 Anchor Pin Lock for Meritor
1" "W" Series 14-1/2" x 4" and 6"
Coach Brakes
E-10865 1-1/4" 3/4" 3/64" Bendix 55656 Use on Meritor 14-1/2" x 10"
W series coach brakes and
15" x 3-1/2" and 4" T brakes.
E-3874 1-1/4" 13/16" 5/32" Meritor 1229V1504 Anchor Pin Washer for
Meritor 15" x 4" Front "Q"
Brake
E-3427 1-3/8" 25/32" 1/8" Meritor 1229V1556 Anchor Pin Washer for
Dana/Spicer 341552 Meritor 15" x 3-1/2" and 4" "T"
Series Brakes
E-2391 1-1/2" 1" 1/32" Eaton 22135 Anchor Pin Washer for use
Std. Forge 403147 with E-2390 Anchor Pin
Dana/Spicer M10HM136
Dana/Spicer M10HN136
E-10842 1-5/8" 29/32" 1/4" Meritor 1229T1554 Anchor Pin Washer
E-1113 1-7/8" 1-17/64" 1/16" Meritor 1229B1848 Anchor Pin Washer for
Meritor 1229G2971 Meritor 4000-6000 Series
Meritor 1229Q433 Axle Spline End
Eaton 3-2180
Eaton 820182
Eaton B-2019
E-10831 1-7/8" 1-17/64" 3/32" Meritor 1229E1565 Anchor Pin Washer
E-10832 1-7/8" 1-17/64" 1/8" Meritor 1229F1566 Anchor Pin Washer
E-10833 1-7/8" 1-17/64" 5/32" Meritor 1229G1567 Anchor Pin Washer
1-118
1
BRAKE SHOE BUSHINGS
EUCLID APPLICATION AND
NO. O.D. I.D. LENGTH REPLACES GENERAL INFORMATION
E-2218 1-3/8" 1-1/4" 11/16" Meritor 1225F266 Stainless steel version of
Fruehauf 219299 E-541 bushing
Eaton B-1559
Eaton B-1713
Eaton B-615-4
E-541 1-3/8" 1-1/4" 11/16" Meritor 1225F266 Steel-backed bronze for cast
Fruehauf 219299 shoe or rebushable fabricated
Trailmobile 37824 shoes.
Eaton B-1559
Eaton B-1599
Eaton B-1713
Eaton B-615-4
Dana/Spicer M16HD102
E-530 1-3/8" 1-1/4" 1-1/4" Std. Forge 405102 Graphite impregnated. For
Eaton B-1713-1 16-1/2" and 17-1/4" x 10"
Dana/Spicer M16HD102 Brakes. Use with E-1431
anchor pin.
E-9047 1-13/32" 1-1/4" 3/4" Eaton 809068 Steel. For Eaton "ES" Severe
Service cast brake shoes.
E-10839 1-1/2" 1-1/4" 5/8" Meritor 1725H8 Use with Meritor coach
14-1/2" brake
E-10813 1-1/2" 1-1/4" 1-61/64" Meritor 1725V22 Use with Meritor coach
14-1/2" brake.
GREASE FITTINGS
APPLICATION AND GENERAL
EUCLID NO. THREAD REPLACES INFORMATION
E-1307 1/8" Pipe Thread Straight fitting. For Anchor Pins,
Support Brackets and Spiders
E-1308 1/8" Pipe Thread 45° angle fitting. For Anchor Pins,
Support Brackets and Spiders
1-119
ANCHOR PIN SPIDER BUSHINGS
EUCLID APPLICATION AND
NO. O.D. I.D. LENGTH REPLACES GENERAL INFORMATION
E-2389 1-1/8" 1" Eaton 22143 For Late Model Std.Forge
Std. Forge 405131 12-1/4" Brakes
Dana/Spicer M10WJ138
Dana/Spicer M10WJ183
E-8938 1-3/8" 1-1/4" 1-29/64" Meritor 1225B496 Stainless steel "dimpled" I.D.
Available exclusively from
Euclid! Same as E-1893,
except dimpled I.D. surface
acts as reservoir to trap and
hold antiseize lubricant
corrosion resistance. Makes
anchor pin removal easier at
reline.
E-1893 1-3/8" 1-1/4" 1-29/64" Trailmobile 12241 Stainless steel. Smooth I.D.
Meritor 1225B496 No slot. Use with E-1112 pin
Trailmobile 15409
Dana/Spicer 16-563
Dana/Spicer 16565
Eaton 2-2142
Eaton 2-809506
Trailmobile 21-L1498
Midland 65372
Midland 65732
Trailmobile 7-6-33
Trailmobile 700-7-197
Eaton 88422
Midland C63084
E-1893S 1 1-3/8" 1-1/4" 1-29/64" Carbon steel. Smooth I.D. No
slot. Use with E-1112 pin
E-920S 1-3/8" 1-1/4" 1-15/32" Carbon steel. Slot off center.
Use with E-609 pin
E-920 1-3/8" 1-1/4" 1-15/32" Meritor 1225A443 Stainless steel. Slot off
Meritor 1225S1267 center. Use with E-609 pin
Eaton 2-2141
Eaton 2-809507
Holland Hitch A-XA0068
Holland Hitch A-XA0068-X
Fruehauf AXA-000068
E-10836 1-1/2" 1-1/4" 1-15/32" Meritor 1225X440
1-120
1
ANCHOR PIN SPIDER BUSHINGS
EUCLID APPLICATION AND
NO. O.D. I.D. LENGTH REPLACES GENERAL INFORMATION
E-10828 1-1/8" 3/4" 1/2" Meritor 1246L350
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
1-121
BRAKE SHOE RETURN SPRINGS
FOR 12-1/4" BRAKES
APPLICATION AND
EUCLID NO. REPLACES LENGTH O.D. GENERAL INFORMATION
E-1025 Dana/Spicer 11528 4-3/16" 3/4" For 12-1/4" Brakes. Heavy-
Std. Forge 208105 Duty Version of E-1025
Eaton 70325 .109 Dia. Wire
Wagner 914100
Dana/Spicer M10WJ115
Dana/Spicer M10WJ155
E-2101 Dana/Spicer 11528 4-3/16" 3/4" For 12-1/4" Brakes Heavy-
Std. Forge 208105 Duty version of E-1025
Eaton 70325 .120 Dia. Wire
Dana/Spicer M10WJ115
E-1402 Eaton 820276 5" 1" Eaton 12-1/4" Brake used
Eaton B-866 with both fabricated and steel
cast shoes at anchor pin end
for "S" type cams. Available
only in brake kit E-2126.
E-1400 Eaton 1003817 6" 1/2" For 12-1/4" Brakes With
Eaton 78580 Pressed Steel Shoe Only.
Eaton 820164 Use 2 Springs per Shoe
Eaton B-2010
E-757 Meritor 2258V256 6-1/4" 1" For Std. Forge 12-1/4" Brake
Dana/Spicer M10WJ118 and Meritor 16-1/4" x 3-1/2"
Dana/Spicer M10WJ135 "T" Series Brake
E-3481A Meritor 2258B704 6-7/8" 1-1/8" For Meritor 12-1/4" "Q" Brake
Meritor 2258T124
E-10818 Meritor 2258J1440 8-11/16" 5/8" Steer Axle 14-1/2" x 4", 5",
Meritor 2258K401 and 6" "W" Series
1-122
1
BRAKE SHOE RETURN SPRINGS
FOR 15" BRAKES
APPLICATION AND
EUCLID NO. REPLACES LENGTH O.D. GENERAL INFORMATION
E-9037 Eaton 817017 3-9/16" 1-3/16" For Eaton 15" x 6" "ES"
Reduced Envelope Front Axle
Brake. Requires two springs
per brake assembly
E-5123 Eaton 1006562 7-1/8" 13/16" For Eaton 15" Front Brakes
E-3437 Meritor 2258G579 7-3/16" 7/8" For Meritor "T" Series 15"
Front Brake
E-980 Wagner FD31958 7-1/2" 1-3/32" For Wagner 15" Drive Axle
Brakes
E-9063 Meritor 2258L1234 8-3/8" 1-1/8" For Meritor 15" "Q Plus"
Brake
E-2770 Wagner FC89177 10-1/8" 1" For Wagner 15" x 4" Front
Wagner FC89178 Axle Brake. Three piece
assembly
E-9038 Eaton 812992 10-1/8" 1-1/8" For Eaton 15" x 8-5/8" "ES"
Reduced Envelope Drive Axle
Brake
1-123
BRAKE SHOE RETURN SPRINGS
FOR 16-1/2" BRAKES
EUCLID APPLICATION AND GENERAL
NO. REPLACES LENGTH O.D. INFORMATION
E-9046 Eaton 807930 6-21/32" 1-1/4" For Eaton 16-1/2" x 7" "ES" Severe
Service Brake with Cast Shoes
E-544 Std. Forge 208104 7-1/2" 1-1/8" For Std. Forge Cast Shoes
Dana/Spicer M10WJ154
E-752 7-7/8" 1-1/8" For 16-1/2" Mack Old Style Cast Shoes
E-545A Dana/Spicer 11227 8" 1-1/8" For Standard "P" Style Brakes. Use
Eaton 2-2117 E-1880B for Heavy-Duty Application
Std. Forge 208102
Fruehauf 219310
Meritor 2258P354
Trailmobile 37080
Dana/Spicer M10WJ135
E-1880B Dana/Spicer 11227 8" 1-1/4" 100 lb. "Mega Plus" spring for 18" Brakes.
Eaton 2-2118 Heavy-Duty version of E-545A. Use for
Std. Forge 208102 Spicer "XL" Brakes and Meritor "P"
Fruehauf 219310 Brakes.
Meritor 2258Z416
Dana/Spicer M10WJ135
E-1880S 1 8" 1-1/4" For 16-1/2" Brakes. Heavy-Duty Wire,
80 lb. tension, not shot-peened. Found in
"Stopmate Plus" Brake Repair Kits. Same
applications as
E-1880B.
E-2768 Eaton 2-2120 8-3/8" 1-1/8" For 16-1/2" Brakes with Shoe Return
Meritor 2258U619 Spring for Meritor "Q" and Spicer "Fast
Dana/Spicer M16WJ100 Change". Use with E-2767 Spring.
E-3228 Dana/Spicer 19-883 8-3/8" 1-1/8" For 16-1/2" Fruehauf "XEM" Brake
Eaton 2-2119
Trailmobile 38-3228
Wagner 914113
Fruehauf ACE-009911-001
Fruehauf ACE-009911-EX1
Fruehauf ACE-009911-PKG
Midland C67470
E-3490B Meritor 2258U619 8-3/8" 1-1/4" 100 lb. "Mega Plus" spring. Heavy-Duty
Meritor 2258W803 Version of
Holland Hitch A-CF6414-1 E-2768 and E-3228. Use for Meritor
Fruehauf ACE-009911-PKG "Q Plus"
Fruehauf ACF-006414-001
Dana/Spicer M16WJ100
E-3490S 8-3/8" 1-1/4" Heavy-Duty wire, 80 lb. tension, not
shot-peened. Found in "Stopmate Plus"
Brake Repair Kits. Same applications as
E-3490B.
E-8907 Eaton 810292 8-13/32" 1-1/8" For Eaton 16-1/2" x 7" "ES" Severe
Service Brake with fabricated shoes and
Eaton "Top Spec ES" retrofit for Fruehauf
and Meritor brakes.
E-9069 Meritor 2258S643 8-9/16" 1-1/8" Bent Center Bar for Meritor 16-1/2" Front
"Q" Brakes on "FL" Series Axles
1-124
1
BRAKE SHOE RETURN SPRINGS
FOR 16-1/2" BRAKES
APPLICATION AND
EUCLID NO. REPLACES LENGTH O.D. GENERAL INFORMATION
E-543 Fruehauf 219311 9" 1-1/8" Used on 16-1/2" x 6" x 7"
Meritor 2258K349 Shoes. Also 18" x 7" Brakes
Meritor 2258R349 with Cast Shoe.
Trailmobile 44750
E-9643 Meritor 2258Y1273 9-1/16" 1-3/16" For 16-1/2" Brakes with
relocated return spring shoes
and "Q Plus" camshafts. Can
also be used on "Hammer
Claw" camshafts
E-3824 Meritor 2258R642 9-1/8" 1-1/8" For Mack 16-1/2" x 5" Front
Meritor 2258Y1273 "Q" Brake
E-10197 Eaton 2-806235 10-3/4" 1-1/8" 100 lb. "Mega Plus" spring for
Eaton 2-818278 Eaton 16-1/2" "ES" and
"ES-II" Brake
E-1880B Dana/Spicer 11227 8" 1-1/4" 100 lb. "Mega Plus" spring for
Eaton 2-2118 18" Brakes. Heavy-Duty
Std. Forge 208102 version of E-545A. Use for
Fruehauf 219310 Spicer "XL" Brakes and
Meritor 2258Z416 Meritor "P" Brakes.
Dana/Spicer M10WJ135
1-125
BRAKE SHOE RETURN SPRINGS
FOR 18" BRAKES
APPLICATION AND
EUCLID NO. REPLACES LENGTH O.D. GENERAL INFORMATION
E-543 Fruehauf 219311 9" 1-1/8" Used on 16-1/2" x 6" x 7"
Meritor 2258K349 Shoes. Also 18" x 7" Brakes
Meritor 2258R349 with Cast Shoe.
Trailmobile 44750
E-2804 Eaton 1000091 11-3/8" 1-1/4" For Eaton 18" x 7" Brake.
Eaton 2-3689
Eaton 653453
Eaton EB1000091
E-1140 Trailmobile 12608 7-3/4" 29/32" For 15" x 6" and 7" "RD" and
Meritor 2258E629 Weld-On "RD" Trailer Brakes.
Replaces old style blue and
green spring.
E-2745 Bendix 324095 8-3/8" 15/16" For Bendix "Non-Servo" Front
Brake
E-2476 Meritor 2758W127 8-3/8" 1" For Meritor Front Axle Wedge
Brake Square Connecting
Rod For Application on Cast
Spider
E-2805 Eaton 1000092 4-5/8" 1-1/4" Retainer Spring for Eaton 18"
Eaton EB1000092 x 7" Brake
E-3873 Meritor 2258E1123 5-9/32" 5/8" For Meritor 15" x 4" "Q" Brake
1-126
1
BRAKE SHOE RETAINER SPRINGS
APPLICATION AND
EUCLID NO. REPLACES LENGTH O.D. GENERAL INFORMATION
E-2767 Eaton 2-2124 5-1/2" 3/4" Retainer Spring for Eaton 15"
Eaton 2-809513 x 8- 5/8" "Reduced Envelope",
Meritor 2258Q615 Fruehauf "XEM", Spicer and
Holland Hitch A-CF3079-1 Meritor 12-1/4", 16-1/2" "Q"
Fruehauf ACF-003079-001 and "Q Plus"
Fruehauf ACF-003079-PK1
Dana/Spicer M16WJ101
E-10198 Eaton 819725 5-1/2" 13/16" Retainer Spring for Eaton
16-1/2" x 7" "ES-II" Brake.
Install with Coil End up.
E-5088 Meritor 2258X804 6-5/16" 3/4" For Mack with Meritor 16-1/2"
"Q" Brake on 50,000 lb. Rear
Axles
E-747 Dana/Spicer 11228 2-3/4" 1/4" Use with Fabricated Shoes for
Trailmobile 11516 Kershaw, Fruehauf, Shuler,
Meritor 1218G85 Meritor, Spicer (Dana) and
Eaton 2-2115 Std. Forge
Eaton 2-809512
Std. Forge 207102
Dana/Spicer M16WJ102
E-10811 Meritor 1746U47 2-25/32" 27/64" Use with Meritor Coach
14-1/2" Brakes
E-2109 Eaton 820202 3" 1/4" Used on Eaton 22L and 23L
Eaton B-2154
1-127
BRAKE IDENTIFICATION: "STANDARD" "EXTENDED LIFE"
HOW TO USE THIS CHART
S-CAM HEAD S-CAM HEAD
• Compare Brake Shoe Profiles
1 3 /8 " 1 1 /8 "
• Compare Table End Views
• Compare Brake Block Drill Patterns
• Determine Which Type of
(Left hand (Left hand
Camshaft Each Brake Shoe Uses shown) shown)
anchor end
view anchor end
view
Use "std."
28 Holes OR 1 1/ 4" Use
11 / 4 " 28 Holes
3 /4 "
Thick "ext. life" "ext. life" 7 /8 "
Thick
10-8 Rivets camshaft E-1778 E-5480 camshaft
10-9 Rivets
FMSI 4515E FRUEHAUF EATON "ES II" FMSI 4709
"XEM"
roller end
view 59/64" anchor end
view
Use
"std." 11/4" Use
32 Holes 28 Holes
camshaft 11/16" "ext. life" 7 /8 "
3/4" Thick Thick
E-3920 E-10272 camshaft
10-8 Rivets 10-9 Rivets
1-128
"Standard" vs. "Extended Life" 1
"Standard" brakes use "standard" OR
"extended life" camshafts.
Most "extended life" brakes use ONLY
"extended life" camshafts.
EUCLID BRAKE
Fruehauf brakes use ONLY REPAIR KITS
"standard" camshafts.
EUCLID BRAKE EUCLID
SHOE NO. TYPE KIT NO.
"EXTENDED LIFE" BRAKES E-1887AHD
E-1778 EATON E-1887ASHD
BRAKE BLOCK
BRAKE TYPE TABLE DRILL PATTERN
E-2769HD
E-6075 MERITOR "Q" E-2769S
FOR FRUEHAUF E-2769SHD
EATON
E-8922 TOP SPEC E-8923
"ES" FOR
FRUEHAUF
EATON
E-8924 TOP SPEC E-8925
"ES" FOR
MERITOR
1-129
CAM BRAKE SHOES - 12-1/4" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-9025 Dexter 40-164 12-1/4" x 4" 4700 8- E-2402HD, Dexter
E-2403HD
E-9026 Dexter 40-165 12-1/4" x 5" 4661C 8- E-2402HD, Dexter
E-2403HD
E-10876 Dexter 40-321 12-1/4" x 4" 4700 8- E-10875 Dexter "PQ"
E-1398 Eaton 820173 12-1/4" x 4591 20-8 E-2126 Eaton "FTL" and
7-1/2" "SA" Type
E-1580 Fruehauf ACD-002227-001 12-1/4" x 8" 4649 20-8 E-2286 Fruehauf "Pro-Par"
E-3491 Meritor A3222S1527 12-1/4" x 4670 10-9 E-3484 Meritor "Q" Brake
7-1/2"
E-1413A Spicer 12018 12-1/4" x 4607 3/8" E-2030HD Spicer and Std.
Spicer M12WS102 7-1/2" Bolt Forge Cast Iron
Std Forge 201103
1-130
1
CAM BRAKE SHOES - 12-1/4" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-2393A Spicer and Standard Forge 12-1/4" x 4536E 20-8 E-3373HD, Spicer and Std.
Spicer M12WS151X 5-1/2" E-3374HD, E-9281, Forge Standard
E-9282 Version
E-2394A Spicer and Standard Forge 12-1/4" x 4692 10-8 E-3373HD, Spicer and Std.
Spicer M12WS148X 7-1/2" E-3374HD, E-9281, Forge Standard
E-9282 Version
E-5303A Spicer and Standard Forge 12-1/4" x 4692 10-8 E-3782, E-9283 Spicer and Std.
Spicer (New) M12WS149X 7-1/2" Forge "U" Brake
Spicer (Old) M12KB251X
Spicer (Old) M12WS129X
Std Forge 204102
E-1412A Spicer 12016 12-1/4" x 4544 3/8" E-2030HD Spicer and Std.
Spicer M12WS108 5-1/2" Bolt Forge Cast Iron
Std Forge 201102
E-2393 Standard Forge 201142 12-1/4" x 4536B 20-8 E-2402HD, Standard Forge
Spicer M12WS122X 5-1/2" E-2403HD Heavy-Duty
Version for Severe
Service
E-2394 Standard Forge 201140 12-1/4" x 4591 20-8 E-2402HD, Standard Forge
Spicer M12WS127X 7-1/2" E-2403HD Heavy-Duty
Version for Severe
Service
1-131
WEDGE BRAKE SHOES - 15" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-1489 Bendix 316997 15" x 6" 4605 10-9 E-2157 For Bendix Spider
Mounted Wedge
Brake (Twin-Plex)
E-1457 Meritor A3722E681 15" x 3-1/2" 4562A 8-7 See Meritor Wedge Meritor "Stopmaster"
Brake Section
E-2689 Meritor A3722T358 15" x 5" 4615 10-9 See Meritor Wedge Meritor "Stopmaster"
Brake Section
E-1139 Meritor A3222S2021 15" x 7" 4602 10-9 See Meritor Wedge Meritor "Stopmaster"
Brake Section
E-3495 Meritor A3222V1088 15" x 4" 1308 10-7 See Meritor Wedge Meritor RSA
Brake Section "Stopmaster". Mfg.
Stamping No.:
3222-T-1086 (Web);
3222-B-1094 (Table)
E-11982 Eaton 974584 15" x 4" 4729 10-7 E-11981 Eaton Single Anchor
Pin Front Axle for
"ES" "Extended
Service" brakes.
Double web.
E-5126 Eaton 1005840 15" x 4" 1308 10-7 E-5139 Eaton Single Anchor
Pin Front Axle
E-9027 Eaton 807685 15" x 4" 1443TT 10-7 E-5139 Eaton "ES"
"Extended Service"
Front Axle. Single
web. Stamping No.:
807686
E-9140 Eaton 816077 15" x 6" 4716 10- E-9141 Eaton "Reduced
Envelope" Brake
E-9036 Eaton 813005 15" x 8-5/8" 4717 10- E-9039 Eaton "Reduced
Envelope" Brake
E-3438 Meritor A3222K1103 15" x 3-1/2" 1307 10-8 E-4691, E-6879 Meritor "T" Brake
Front Axle. Mfg.
Stamping No.:
3222-S-1085 (Web);
3222-A-1093 (Table)
E-3439 Meritor A3222F1072 15" x 4" 1308 10-7 E-4691, E-6879 Meritor "T" Brake
Front Axle. Mfg.
Stamping No.:
3222-S-1085 (Web);
3222-B-1094 (Table)
1-132
1
CAM BRAKE SHOES - 15" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-5528 Meritor A3222F1982 15" x 4" 1308T 10-7 E-3869, E-7899 Meritor "Q" Brake
Front Axle. Mfg.
Stamping No.:
3222-D-1980 (Web);
3222-B-1094 (Table)
E-9062 Meritor A3222M2223 15" x 4" 4702 10-9 E-9064 Meritor "Q Plus"
Meritor A21-3222M2223 Brake. Mfg.
Stamping No.:
3222-F-2164 (Web);
3222-W-1947 (Table)
E-11453 Meritor A3222D2110 15" x 5" 4703 10-9 E-9064 Meritor "Q Plus"
Brake. Front Axle.
Mfg. Stamping No.:
3222-B-2108 (Web);
3222-R-1968 (Table)
E-11454 Meritor A3222E2111 15" x 6" 4704 10-9 E-9064 Meritor "Q Plus"
Brake. Front Axle.
Mfg. Stamping No.:
3222-B-2108 (Web);
3222-E-1955 (Table)
E-11455 Meritor A3222F2112 15" x 7" 4705 10-9 E-9064 Meritor "Q Plus"
Brake. Rear Drive or
Trailer Axle. Mfg.
Stamping No.:
3222-B-2108 (Web);
3222-X-1948 (Table)
E-11456 Meritor A3222A2159 15" x 8-5/8" 4710 10-9 E-9064 Meritor "Q Plus"
Brake. Drive and
Trailer Axle. Mfg.
Stamping No.:
3222-B-2108 (Web);
3222-B-2160 (Table)
E-2728 Wagner FE-83177 15" x 3-1/2" 1279 8-7 E-2740 Wagner Front Axle
Wagner FE-32462
E-2729 Wagner FE88633 15" x 4" 1308A 8-7 E-3291 Wagner Front Axle.
5/16" Thick Web;
"A" = 2-15/32"
E-4785 Wagner FE100307 15" x 4" 1308A 8-7 E-3291 Wagner Front Axle.
Special for Navistar
7/32" Thick Web;
"A" = 2-7/32"
E-2712 Wagner FE31965 15" x 7" 4595 10-8 E-2713 Wagner for Truck
and Bus
1-133
CAM BRAKE SHOES - 16-1/4" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-3441 Meritor A3722U385 16-1/4" x 4561 7-7 E-4692 Meritor "T" Brake
3-1/2" Front Axle
E-2474 Eaton 805677 16-1/2" x 4223A 10-10 E-3801 Eaton Single Anchor Pin -
5" High Mount (Offset Spring
Retainer Pin)
E-9509 Eaton 805679 16-1/2" x 4317 10-8 E-3801 Eaton Single Anchor Pin -
6" High Mount (Offset Spring
Retainer Pin)
E-1777 Eaton 805678 16-1/2" x 4317G 10-8 E-1887 Series, Eaton Single Anchor Pin
6" E-2820 Tractor and Trailer
E-2819 Eaton 805460 16-1/2" x 4311J 10-8 E-3801 Eaton Single Anchor Pin -
Eaton 1001955 7" High Mount (Offset Spring
Retainer Pin)
E-1778 Eaton 805442 16-1/2" x 4311J 10-8 E-1887 Series, Eaton Single Anchor Pin
Eaton 804365 7" E-2820 Tractor and Trailer
E-9054 Eaton 805682 16-1/2" x 4674 10-8 E-1887 Series Eaton Single Anchor Pin
8-5/8" Tractor and Trailer
E-5480 Eaton 806229 16-1/2" x 4709 10-9 E-5481A Eaton "ES" "Extended
7" Service" Brake
E-9040 Eaton 810214 16-1/2" x 4708 10-10 E-9048 Eaton "ES" Severe
7" Service - Cast Iron
E-8922 Eaton ES807799 16-1/2" x 4708 10-9 E-8923 Eaton Top Spec "ES" For
7" Fruehauf "XEM" Brake
1-134
1
CAM BRAKE SHOES - 16-1/2" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-8924 Eaton ES807772 16-1/2" x 4708 10-9 E-8925 Eaton Top Spec "ES" For
7" Meritor "Q" Brake (not for
Meritor "Q Plus")
E-9049 Eaton 812114 16-1/2" x 4708 10-9 E-9052 Eaton "ES" Severe
7" Service
E-10270 Eaton 819705 16-1/2" x 4719 10-9 E-10760 Eaton "ES II" Brake. Mfg.
5" Stamping No.: 819700
(Web)
E-10271 Eaton 819706 16-1/2" x 4725 10-9 E-10760 Eaton "ES II" Brake. Mfg.
6" Stamping No.: 819700
(Web)
E-10272 Eaton 819707 16-1/2" x 4709 10-9 E-10244 Eaton "ES II" Brake. Mfg.
7" Stamping No.: 819700
(Web)
E-10273 Eaton 819784 16-1/2" x 4726 10-9 E-10244 Eaton "ES II" Brake. Mfg.
Eaton 819708 8-5/8" Stamping No.: 819700
(Web)
E-3920 Fruehauf ACF-003379-001 16-1/2" x 4515E 10-8 E-3710 Series, Fruehauf Current Design
7" E-3895 Series "XEM"
E-3714 Fruehauf ACF-003380-002 16-1/2" x 4551E 10-8 E-3710 Series, Fruehauf Current Design
8-5/8" E-3895 Series "XEM" Offset - RH
E-6075 Meritor A3222N1496 16-1/2" x 4515E 10-8 E-2769 Series, Meritor for Fruehauf
7" E-3895 Series, "XEM" Brake. Mfg.
E-6999 Series Stamping No.: F5 (Web)
E-2686 Meritor A3722B80 16-1/2" x 4549C 10-8 KIT-4 Series, Meritor "P" Brake Front
4" E-1816 Series Axle
E-2687 Meritor A3722D82 16-1/2" x 4524B 10-8 KIT-4 Series, Meritor "P" Brake Front
5" E-1816 Series Axle
1-135
CAM BRAKE SHOES - 16-1/2" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-2684 Meritor A3722L64 16-1/2" x 4514G 10-9 KIT-4 Series, Meritor "P" Brake for
Meritor A3222X1142 6" E-1816 Series Tractor and Trailer
E-2241 Meritor A3722N66 16-1/2" x 4515E 10-8 KIT-4 Series, Meritor "P" Brake for
7" E-1816 Series Tractor and Trailer
E-5239 Meritor A3222L1572 16-1/2" x 4551E 10-8 KIT-4 Series, Meritor "P" Brake for
8-5/8" E-1816 Series Tractor and Trailer
E-3303 Meritor A3222E1383 16-1/2" x 4524B 10-8 E-2769 Series, Meritor "Q" Brake Mfg.
5" E-3895 Series, Stamping No.:
E-6999 Series 3222-Q-1291 (Web)
E-3823 Meritor A3222J1440 16-1/2" x 4524B 10-8 E-3858, E-9644 Meritor "Q" Brake Special
5" (Contains for Mack. Relocated
E-9643 offset- Return Spring. Mfg.
center bar Stamping No.:
spring) 3222-U-1347 (Web)
E-9780 Meritor A3222V1348 16-1/2" x 4514G 10-8 E-3858 E-9644 Meritor "Q" Brake Special
6" (Contains for Mack. Relocated
E-9643 offset- Return Spring. Mfg.
center bar Stamping No.:
spring) 3222-U-1347 (Web)
E-3304 Meritor A3222C1381 16-1/2" x 4514G 10-8 E-2769 Series, Meritor "Q" Brake
6" E-3895 Series,
E-6999 Series
E-5092 Meritor A3222S1735 16-1/2" x 4515H 10-8 E-5086 Meritor "Q" Brake with 3/8"
7" Thick Web
E-3522 Meritor A3222T1346 16-1/2" x 4551B 10-8 E-2769 Series, Meritor "Q" Brake
8-5/8" E-3895 Series,
E-6999 Series
E-3417 Meritor A3222D1356 16-1/2" x 4514G, 10-8 E-2769 Series, Meritor "Q" Brake
10" 4549C E-3895 Series,
E-6999 Series
E-10854 Meritor A3222Z2288 16-1/2" x 4720 10-9 E-9644 Meritor "Q Plus" Brake.
5" NOTE: Euclid
recommends using only
Heavy-Duty Return
Springs with "Q Plus"
Brakes.
E-10847 Meritor A3222P2200 16-1/2" x 4715 10-9 E-9644 Meritor "Q Plus" Brake.
6" NOTE: Euclid
recommends using only
Heavy-Duty Return
Springs with "Q Plus"
Brakes.
E-5503 Meritor A3222D2006 16-1/2" x 4707 10-9 E-2769 Series Meritor "Q Plus" Brake.
7" NOTE: Euclid
recommends using only
Heavy-Duty Return
Springs with "Q Plus"
Brakes.
1-136
1
CAM BRAKE SHOES - 16-1/2" DIA. BRAKES
UNLINED FMSI USE BRAKE
SHOE NO. REPLACES SIZE NO. RIVET REPAIR KIT APPLICATION
E-10850 Meritor A3222J2272 16-1/2" x 4718 10-9 E-2769 Series Meritor "Q Plus" Brake.
8" NOTE: Euclid
recommends using only
Heavy-Duty Return
Springs with "Q Plus"
Brakes.
E-10844 Meritor A3222K2169 16-1/2" x 4711 10-9 E-2769 Series Meritor "Q Plus" Brake.
8-5/8" NOTE: Euclid
recommends using only
Heavy-Duty Return
Springs with "Q Plus"
Brakes.
E-2778 Meritor A91-3222S1293 16-1/2" x 4515E 10-8 E-2769 Series, Meritor "Q" Brake. Spicer
Meritor A3222S1293 7" Meritor Meritor E-3895 Series, "XL" "Xtralife" Brake.
Fruehauf ACF04362-001 E-6999 Series
Spicer M16WS103X Meritor Appl.
4701 10-9 E-5515 Spicer
Spicer Spicer Applications
E-5500 Spicer M16WS100X 18" x 7" 4284 E-5499 Spicer and Std. Forge
Standard Forge 201144
1-137
BRAKE SPIDERS - TRAILERS ONLY
BOLT NO. OF
EUCLID PILOT CIRCLE HOLE MTG. APPLICATION AND
NO. REPLACES DIA. DIA. DIA. HOLES GENERAL INFORMATION
E-959 Kit contains: Brake Spider and Flange
1 E-957 Brake Spider; Mounting Kit for 16-1/2"
1 E864 Brake Flange; Brakes. For Meritor Standard
16 E-632 Spider Mounting Bolts TK500 Series and Eaton
& Nuts 18,000 lb. Axles. Also Std.
Forge 17,000 and 18,000 lb.
Axles.
E-957 Std. Forge 200999-010 5-5/8" 6-5/8" 1/2" 16 Bolt-On Spider Assembly for
Meritor A3211A833 16-1/2" Brakes. Easy Anchor
Eaton B-1593-1 Pin Removal and
Dana/Spicer M16WS135X Replacement. Prevents
Bending of Spiders Caused
by Driving Out Frozen
Anchor Pins. Allows
Adjustment for Wear.
INCLUDES: E-1416 Seal
and E-759 Bushing
1-138
1
DUST SHIELDS
(SOLD ONLY IN SETS)
FOR MERITOR TRAILER APPLICATIONS WITH FABRICATED STEEL SPIDERS
1-139
DUST SHIELDS
(SOLD ONLY IN SETS)
FOR MULTI-PURPOSE TRAILER APPLICATIONS
1-140
1
DUST SHIELDS
(SOLD ONLY IN SETS)
FOR EATON BRAKES - TRUCK/TRACTOR APPLICATION WITH CAST SPIDERS
1-141
BRAKE Shaft splines are machine
rolled and induction hardened
CAMSHAFTS for added strength and
durability.
1-142
How to use this Euclid E.S.P. Guide
1. Measure Camshaft Length. All Euclid Camshaft Lengths are measured from under the camshaft head to the
beginning of the lock ring groove. 1
B
Note 2 - Spicer (Dana) 12 1/4" Camshaft, Brake Shoe and Hardware Selection
The two current Spicer 12 1/4" camshaft designs that Euclid offers are the Standard head (Type 3 on E.S.P. Guide), and the
second design "Fast-Rise" head, with "0794" OE head marking (Type 5 on E.S.P. Guide). Below is application information on
these two camshaft series, along with the associated Euclid Brake Shoe and Repair Kit part numbers required.
The first design "Fast-Rise", with "M12" OE head marking (part numbers E-6083 through E-6100), have been discontinued by
Spicer and Euclid. Standard and first design "Fast-Rise" camshafts can be replaced in pairs with second design "Fast-Rise"
when using the correct shoe and roller (see below). Do not mix standard, first design or second design "Fast-Rise" camshafts
on a single or tandem axle.
Fabricated E-3373HD
E-2177 1 1/4" 1 Piece Standard
"Standard Version" E-2393A 5 1/2" 4536E E-3374HD*
E-2394A 7 1/2" 4692 E-9281
(Open Roller End) E-586 1 1/2" 1 Piece "Fast-Rise" (0794)
E-9282*
Fabricated "U" E-3782 E-2177 1 1/4" 1 Piece Standard
E-5303A 7 1/2" 4692
(Open Roller End) E-9283 E-586 1 1/2" 1 Piece "Fast-Rise" (0794)
* Conversion Brake Repair Kits to install fabricated shoes on bolt-on spiders, in place of cast shoes
1-143
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-144
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-145
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-146
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-147
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-148
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-149
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-150
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-151
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-152
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-153
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-154
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-155
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-156
1
EUCLID CAMSHAFT E.S.P. GUIDE
* Left or Right Hand description refers to the rotation of the Camshaft Head. This description does not always match the position of the
Camshaft on the axle.
1-157
BRAKE CAMSHAFTS -- STEERING AXLE
FOR EATON STEERING AXLES WITH 15" SINGLE ANCHOR PIN BRAKES
FOR EATON STEERING AXLES WITH 15" "ES" "EXTENDED SERVICE" BRAKES
1-158
1
BRAKE CAMSHAFTS -- STEERING AXLE
FOR MERITOR STEERING AXLES WITH 15" "T" BRAKES
FOR MERITOR STEERING AXLES WITH 15" "T" AND "Q" BRAKE - NEW STYLE "S"
1-159
BRAKE CAMSHAFTS -- STEERING AXLE
FOR MERITOR STEERING AXLES WITH 15" "Q" BRAKES - 1-1/2" OFFSET BACKING PLATE
FOR MERITOR STEERING AXLES WITH 15" "Q" BRAKES - 2" OFFSET BACKING PLATE
1-160
1
BRAKE CAMSHAFTS -- STEERING AXLE
FOR MERITOR STEERING AXLES WITH 15" "T" BRAKES
1-161
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR EATON DRIVE AXLE
1-162
1
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2 IN. "Q PLUS" BRAKES
1-163
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" STANDARD BRAKES
1-164
1
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-165
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-166
1
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-167
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-168
1
BRAKE CAMSHAFTS -- DRIVE AXLE
FOR MERITOR DRIVE AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-169
BRAKE CAMSHAFTS -- TRAILER AXLE
DEXTER 12-1/4" TRAILER BRAKES 28 SPLINE 1-1/2" JOURNAL DIA.
1-170
1
BRAKE CAMSHAFTS -- TRAILER AXLE
1-1/2" DIAMETER MULTI-APPLICATION CAMSHAFTS FOR TRAILERS WITH 16-1/2" BRAKE - Double Groove
1-1/2" DIAMETER MULTI-APPLICATION CAMSHAFTS FOR TRAILERS WITH 16-1/2" BRAKES - Single Groove
1-171
BRAKE CAMSHAFTS -- TRAILER AXLE
1-1/2" DIAMETER MULTI-APPLICATION CAMSHAFTS FOR TRAILERS WITH 16-1/2" BRAKES - Single Groove
1-172
1
BRAKE CAMSHAFTS -- TRAILER AXLE
1-1/2" DIAMETER MULTI-APPLICATION CAMSHAFTS FOR TRAILERS WITH 16-1/2" BRAKES - Single Groove
FOR EATON TRAILER AXLES WITH 12-1/4 IN. DIA. BRAKES - Double Groove
1-173
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR EATON TRAILER AXLE WITH "501" SERIES WITH 16-1/2" BRAKES
FOR EATON TRAILER AXLE WITH "501" SERIES WITH 16-1/2" BRAKES
FOR EATON TRAILER AXLES WITH 16-1/2" "ES" "EXTENDED SERVICE" BRAKES
1-174
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR EATON TRAILER AXLES WITH 16-1/2" "ES" "EXTENDED SERVICE" BRAKES
1-175
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR FRUEHAUF "PRO-PAR" TRAILER AXLES WITH 16-1/2" BRAKES
1-176
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR MERITOR 4000-6000 SERIES TRAILER AXLES WITH 16-1/2" "Q PLUS" BRAKES
FOR MERITOR 4000-6000 SERIES TRAILER AXLES WITH 16-1/2" "Q PLUS" BRAKES
1-177
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR MERITOR TRAILER AXLES WITH 16-1/2" "Q PLUS" BRAKES
APPLICATION &
GENERAL
EUCLID NO. HEAD END REPLACES A B C INFORMATION
E-9743 LH Dana/Spicer M12WK101-11, M12WK107-1 18-7/8" 2-7/32" 2-21/32" Spicer (Dana) and Std.
Std. Forge 202103191L Forge 12-1/4" x 5-1/2"
E-9744 RH Dana/Spicer M12WK100-11, M12WK106-1 and 12-1/4" x 7-1/2"
Std. Forge 202103191R Brakes. Also can be
E-5096 LH Dana/Spicer M12WK107-3 20-1/2" 2-7/32" 2-21/32" used for Dexter 12-1/4"
Std. Forge 202103-206L Brakes.
E-5097 RH Dana/Spicer M12WK106-3
Std. Forge 202103-206R
E-1411 LH Dana/Spicer M12WK107-6 21-1/8" 2-7/32" 2-21/32"
Std. Forge 202103-213L, UB-22-64L
E-1410 RH Dana/Spicer M12WK106-6
Std. Forge 202103-213R, UB-22-64R
E-9745 LH Dana/Spicer M12WK107-7 22" 2-7/32" 2-21/32"
Std. Forge 202103222L
E-9746 RH Dana/Spicer M12WK100-16
Std. Forge 202103222R
E-1423 LH Dana/Spicer 17-691 23-1/4" 2-7/32" 2-21/32"
Std. Forge 202103-233L, UB-24-15L
E-1422 RH Dana/Spicer M12WK100-17
Std. Forge 202103-233R, UB-24-15R
1-178
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER (STD. FORGE) TRAILER AXLES WITH 12-1/4" BRAKES
APPLICATION &
GENERAL
EUCLID NO. HEAD END REPLACES A B C INFORMATION
E-1421 LH Dana/Spicer M12WK101-19 23-7/8" 2-7/32" 2-21/32" Spicer (Dana) and Std.
Std. Forge 202103-241L, UB-22-23L Forge 12-1/4" x 5-1/2"
E-1420 RH Dana/Spicer M12WK100-19 and 12-1/4" x 7-1/2"
Std. Forge 202103-241R, UB-22-23R Brakes. Also can be
E-2793 LH Dana/Spicer M12WK101-18 24-5/8" 2-7/32" 2-21/32" used for Dexter 12-1/4"
Std. Forge 202103-247L Brakes.
E-2792 RH Dana/Spicer M12WK100-18
Std. Forge 202103-247R
E-9747 LH Dana/Spicer M12WK101-22, M12WK107-13 26-1/2" 2-7/32" 2-21/32"
1-179
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER TRAILER AXLES WITH 12-1/4" BRAKES - "NEW" HEAD DESIGN
REPLACES "FAST-RISE" CAMSHAFT HEAD STYLE
APPLICATION AND
GENERAL
EUCLID NO. HEAD END REPLACES A B C INFORMATION
E-9263 LH Dana/Spicer M12WKL10-163 16-1/8" 2-7/32" 2-21/32" Spicer has changed the
head design of these
E-9264 RH Dana/Spicer M12WKR10-163 camshafts. The new
heads are marked:
E-9751 LH Dana/Spicer M12WKL10-175 17-3/8" 2-7/32" 2-21/32"
"0794L" and "0794R".
E-9752 RH Dana/Spicer M12WKR10-175 Spicer did not change
their part numbers for
E-9749 LH Dana/Spicer M12WKL10-182 18" 2-7/32" 2-21/32" these cams, so pay
E-9750 RH Dana/Spicer M12WKR10-182 attention to the head
markings! WARNING:
E-9265 LH Dana/Spicer M12WKL10-191 18-7/8" 2-7/32" 2-21/32" These camshafts are for
use with fabricated
E-9266 RH Dana/Spicer M12WKR10-191 brakes shoes only! DO
E-9267 LH Dana/Spicer M12WKL10-206 20-1/2" 2-7/32" 2-21/32" NOT use these new
camshafts with cast
E-9268 RH Dana/Spicer M12WKR10-206 brake shoe or fabricated
closed roller-end brake
E-9269 LH Dana/Spicer M12WKL10-214 21-1/4" 2-7/32" 2-21/32" shoes. Euclid fabricated
E-9270 RH Dana/Spicer M12WKR10-214 open roller end brake
shoe numbers are:
E-9271 LH Dana/Spicer M12WKL10-222 22" 2-7/32" 2-21/32" E-2393A, E-2394A, and
E-5303A. WARNING:
E-9272 RH Dana/Spicer M12WKR10-222
E-586, 1-1/2" diameter,
E-9273 LH Dana/Spicer M12WKL10-233 23-1/8" 2-7/32" 2-21/32" Brake Shoe Rollers must
be used with this new
E-9274 RH Dana/Spicer M12WKR10-233 head design. E-586
E-9275 LH Dana/Spicer M12WKL10-236 23-1/2" 2-7/32" 2-21/32" rollers are now available
in Brake Repair Kits
E-9276 RH Dana/Spicer M12WKR10-236 E-9281, E-9282 and
E-9283. WARNING:
E-9277 LH Dana/Spicer M12WKL10-241 23-7/8" 2-7/32" 2-21/32" These camshafts should
E-9278 RH Dana/Spicer M12WKR10-241 not be used in
conjunction with old
E-9279 LH Dana/Spicer M12WKL10-264 26-1/4" 2-7/32" 2-21/32" "Fast-Rise" camshafts
on the same axle. The
E-9280 RH Dana/Spicer M12WKR10-264
rate of brake application
is different between the
two head designs.
1-180
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER TRAILER AXLES WITH 12-1/4" BRAKES - "NEW" HEAD DESIGN
REPLACES "FAST-RISE" CAMSHAFT HEAD STYLE
APPLICATION AND
EUCLID NO. HEAD END REPLACES A B C GENERAL INFORMATION
E-9753 LH Dana/Spicer M12WKL20-205 20-7/16" 2-7/32" 2-21/32" Spicer has changed the head
design of these camshafts.
E-9754 RH Dana/Spicer M12WKR20-205 The new heads are marked:
"0794L" and "0794R". Spicer
E-9755 LH Dana/Spicer M12WKL20-214 21-5/16" 2-7/32" 2-21/32"
did not change their part
E-9756 RH Dana/Spicer M12WKR20-214 numbers for these cams, so
pay attention to the head
E-9757 LH Dana/Spicer M12WKL20-222 22-1/16" 2-7/32" 2-21/32" markings! WARNING:
These camshafts are for use
E-9758 RH Dana/Spicer M12WKR20-222
with fabricated brakes shoes
E-9759 LH Dana/Spicer M12WKL20-233 23-3/16" 2-7/32" 2-21/32" only! DO NOT use these
new camshafts with cast
E-9760 RH Dana/Spicer M12WKR20-233 brake shoe or fabricated
closed roller-end brake
shoes. Euclid fabricated
open roller end brake shoe
numbers are: E-2393A,
E-2394A, and E-5303A.
WARNING: E-586, 1-1/2"
diameter, Brake Shoe
Rollers must be used with
this new head design. E-586
rollers are now available in
Brake Repair Kits E-9281,
E-9282 and E-9283.
WARNING: These
camshafts should not be
used in conjunction with old
"Fast-Rise" camshafts on the
same axle. The rate of brake
application is different
between the two head
designs.
1-181
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER TRAILER AXLES WITH 12-1/4" BRAKES - "NEW" HEAD DESIGN
REPLACES "FAST-RISE" CAMSHAFT HEAD STYLE
APPLICATION AND
EUCLID NO. HEAD END REPLACES A B GENERAL INFORMATION
E-10901 LH Dana/Spicer M12WKL25-206 20-9/16" 2-7/32" Spicer has changed the head
design of these camshafts.
E-10902 RH Dana/Spicer M12WKR25-206 The new heads are marked:
"0794L" and "0794R". Spicer
E-10903 LH Dana/Spicer M12WKL25-214 21-5/16" 2-7/32"
did not change their part
E-10904 RH Dana/Spicer M12WKR25-214 numbers for these cams, so
pay attention to the head
E-10905 LH Dana/Spicer M12WKL25-233 23-3/16" 2-7/32" markings! WARNING:
These camshafts are for use
E-10906 RH Dana/Spicer M12WKR25-233
with fabricated brakes shoes
E-10907 LH Dana/Spicer M12WKL25-241 23-15/16" 2-7/32" only! DO NOT use these
new camshafts with cast
E-10908 RH Dana/Spicer M12WKR25-241 brake shoe or fabricated
closed roller-end brake
shoes. Euclid fabricated
open roller end brake shoe
numbers are: E-2393A,
E-2394A, and E-5303A.
WARNING: E-586, 1-1/2"
diameter, Brake Shoe
Rollers must be used with
this new head design. E-586
rollers are now available in
Brake Repair Kits E-9281,
E-9282 and E-9283.
WARNING: These
camshafts should not be
used in conjunction with old
"Fast-Rise" camshafts on the
same axle. The rate of brake
application is different
between the two head
designs.
1-182
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER (HAYES DANA) TRAILER AXLES WITH 16-1/2" BRAKES
1-183
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER TRAILER AXLES WITH 16-1/2" "XL" "XTRALIFE" BRAKES
1-184
1
BRAKE CAMSHAFTS -- TRAILER AXLE
FOR SPICER TRAILER AXLES WITH 16-1/2" "XL" "XTRALIFE" BRAKES WITH 1-5/8" BEARING JOURNAL
1-185
CAMSHAFT REPAIR KITS
E-2494 For 12-1/4" Dia. Cam Brakes Eaton
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL EATON E-536 1 2 Camshaft Bushing
AXLES E-1385 2 2 Camshaft Bushing
E-1416A 3 4 Camshaft Seal
E-580 4 6 Camshaft Spacer Washer
E-1569 5 2 Camshaft Lock Ring
E-526 6 2 Camshaft Lock Ring
E-3473 7 2 Camshaft Spacer Washer
1-186
1
CAMSHAFT REPAIR KITS
E-5307-2 For 12-1/4" Dia. Cam Brakes Spicer
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR SPICER (DANA) 12-1/4" E-2102 1 1 Camshaft Bushing
"U" BRAKE. E-807 2 1 Bronze Camshaft Bushing
E-1416A 3 2 Camshaft Seal
Half kit includes exactly half of Kit E-2409 4 1 Camshaft Spacer Washer
E-5307 for one wheel end. E-580 5 1 Camshaft Spacer Washer
E-2404 6 1 Camshaft "D" Washer
E-526 7 2 Camshaft Lock Ring
E-801 8 1 Lock Ring
E-2469 For 12-1/4" Dia. Cam Brakes Spicer and Standard Forge
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL SPICER and E-580 1 2 Camshaft Spacer Washer
STANDARD FORGE AXLES E-581 2 2 Camshaft Spacer Washer
E-1416A 3 4 Camshaft Seal
E-2404 4 2 Camshaft "D" Washer
E-526 5 4 Camshaft Lock Ring
E-759 6 2 Camshaft Spider Bushing
E-2102 7 2 Camshaft Bushing
E-2409 8 2 Camshaft Spacer Washer
E-1113 9 2 Washer
E-801 10 2 Lock Ring
1-187
CAMSHAFT REPAIR KITS
E-2469-2 For 12-1/4" Dia. Cam Brakes Spicer and Standard Forge
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL SPICER and E-580 1 1 Camshaft Spacer Washer
STANDARD FORGE AXLES E-581 2 1 Camshaft Spacer Washer
E-1416A 3 2 Camshaft Seal
Half kit includes exactly half of Kit E-2404 4 1 Camshaft "D" Washer
E-2469 for one wheel end. E-526 5 2 Camshaft Lock Ring
E-759 6 1 Camshaft Spider Bushing
E-2102 7 1 Camshaft Bushing
E-2409 8 1 Camshaft Spacer Washer
E-1113 9 1 Washer
E-801 10 1 Lock Ring
E-2526 For 12-1/4" Dia. Cam Brakes Spicer and Standard Forge
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR SPICER and STANDARD E-536 1 2 Camshaft Bushing
FORGE AXLES E-759 2 2 Camshaft Spider Bushing
E-1416A 3 8 Camshaft Seal
Use the shorter E-536 Bushing in E-564 4 4 Camshaft Spacer Washer
cam support bracket and the E-1408 5 2 Camshaft Washer
longer E-759 Bushing in the E-526 6 6 Camshaft Lock Ring
spider.
1-188
1
CAMSHAFT REPAIR KITS
E-10868 For 14-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR COACH 14-1/2" E-3479 1 2 Camshaft Spacer Washer
x 8" and 10" "W" SERIES E-10845 2 2 Camshaft Spacer Washer
E-10848 3 4 Camshaft Seal
E-667 4 4 Bronze Camshaft Bushing
E-10843 5 2 Camshaft Spacer Washer
E-10851 6 4 Camshaft Spacer Washer
E-10852 1 7 2 Retainer Clip
E-10853 1 8 2 Retainer Bolt
1-189
CAMSHAFT REPAIR KITS
E-7235 For 15" Dia. Cam Brakes Bendix
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR BENDIX 15" x 4" STEER E-1416A 1 4 Camshaft Seal
AXLE BRAKE E-667 2 4 Bronze Camshaft Bushing
NSS 1 3 2 Lock Ring
NSS 1 4 2 Spacer
NSS 1 5 4 Spacer
NSS 1 6 4 Spacer
1-190
1
CAMSHAFT REPAIR KITS
E-11904 For 15" and 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR LX/MX 500 NSS 1 1 1 Lube Fitting
SERIES BRAKES E-3859 2 1 Camshaft Seal
E-654 3 1 Camshaft Seal
Services 1 brake. Use with NSS 1 4 1 Grease Seal
stamped or cast spider. NSS 1 5 1 Seal
NSS 1 6 1 Seal
NSS 1 7 1 Seal
NSS 1 8 1 Camshaft Bushing
NSS 1 9 1 Camshaft Bushing
E-5095 10 4 Camshaft Spacer Washer
E-5093 11 1 Camshaft Lock Ring
NSS 1 12 1 Flat Washer
NSS 1 13 1 Special Washer
NSS 1 14 1 Flat Washer
NSS 1 15 2 Plug
1-191
CAMSHAFT REPAIR KITS
E-3876 For 15" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR STEERING E-3877 1 4 Camshaft Bushing
AXLES WITH 15" "Q" SERIES E-3878 2 4 Camshaft Seal
BRAKES E-9076 3 2 Camshaft Lock Ring
E-3476 4 4 Camshaft Spacer Washer
For one complete axle.
1-192
1
CAMSHAFT REPAIR KITS
E-3354 For 15" Dia. Cam Brakes Wagner
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR WAGNER DRIVE AXLE E-2716 1 4 Bushing
BRAKES 15" x 6", 15" x 7" E-2409 2 4 Camshaft Spacer Washer
E-4736 3 2 Camshaft Lock Ring
E-2717 4 4 Camshaft Seal
1-193
CAMSHAFT REPAIR KITS
E-3993B For 15" and 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR 15 and 16-1/2" E-1113 1 4 Washer
DRIVE AXLE "Q" and "Q PLUS" E-801 2 2 Lock Ring
BRAKES E-5093 3 2 Camshaft Lock Ring
E-5512 4 4 Camshaft Bushing
Contains E-3859 Rubber E-654 5 4 Camshaft Seal
Camshaft Support Gasket. E-3479 6 4 Camshaft Spacer Washer
Contains New Style E-5512 E-3478 7 2 Camshaft Wear Washer
Moly-impregnated Spider E-3859 8 2 Camshaft Seal
Bushing. Contains Lock Rings for
Camshafts with narrow or wide
grooves.
1-194
1
CAMSHAFT REPAIR KITS
E-3468A For 15" and 16-1/4" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR 15" and 16-1/4" E-5512 1 4 Camshaft Bushing
DIAMETER "T" SERIES E-654 2 4 Camshaft Seal
BRAKES WITH 1-1/2" E-581 3 2 Camshaft Spacer Washer
DIAMETER CAMSHAFT E-580 4 4 Camshaft Spacer Washer
E-4736 5 2 Camshaft Lock Ring
E-3473 6 2 Camshaft Spacer Washer
E-3472 7 2 Camshaft Spacer Washer
1-195
CAMSHAFT REPAIR KITS
E-2089 For 16-1/2" Dia. Cam Brakes Eaton
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR EARLY MODEL EATON E-536 1 2 Camshaft Bushing
(SHULER) 5" ROUND AXLE E-1385 2 2 Camshaft Bushing
E-654 3 4 Camshaft Seal
(Bolt-On Spiders) E-580 4 8 Camshaft Spacer Washer
E-656 5 2 Camshaft "D" Washer
E-1569 6 2 Camshaft Lock Ring
E-526 7 2 Camshaft Lock Ring
1-196
1
CAMSHAFT REPAIR KITS
E-2696A-2 For 16-1/2" Dia. Cam Brakes Eaton
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL EATON E-2695 1 2 Camshaft Bushing
TRAILER AXLE E-1565 2 2 Camshaft Spacer Washer
E-580 3 2 Camshaft Spacer Washer
With "501" Series Brakes and E-2405 4 2 Camshaft Seal
"ES" Brakes with Long Life Cam E-2690A 5 1 Camshaft Bushing
Support Bushings. Half kit E-1569 6 1 Camshaft Lock Ring
includes exactly half of Kit E-526 7 1 Camshaft Lock Ring
E-2696A for one wheel end. E-801 8 1 Lock Ring
E-5137 9 1 Camshaft Spacer Washer
1-197
CAMSHAFT REPAIR KITS
E-2122 For 16-1/2" Dia. Cam Brakes Fruehauf
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR EARLY MODEL E-1567 1 4 Camshaft Spider Bushing
FRUEHAUF "PRO-PAR" AXLES E-1571 2 2 Camshaft Bushing
E-580 3 2 Camshaft Spacer Washer
E-1565 4 6 Camshaft Spacer Washer
E-1569 5 2 Camshaft Lock Ring
E-526 6 2 Camshaft Lock Ring
E-801 7 2 Lock Ring
1-198
1
CAMSHAFT REPAIR KITS
E-11450HD-2 For 16-1/2" Dia. Cam Brakes Hendrickson
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR HENDRICKSON INTRAAX E-11449 1 1 Bronze Camshaft Bushing
16-1/2" BRAKE E-11451 2 2 Camshaft Seal
E-1113 3 2 Washer
Half kit includes exactly half of Kit E-1318AHD 4 1 Camshaft Support Bracket
E-11450HD for one wheel end. E-2720 5 1 Camshaft Lock Ring
2" bushing and seal O.D. E-564 7 4 Camshaft Spacer Washer
E-656 7 1 Camshaft "D" Washer
E-719 8 2 Camshaft Spacer Washer
E-801 9 1 Lock Ring
1-199
CAMSHAFT REPAIR KITS
E-5094A For 16-1/2" Dia. Cam Brakes Mack
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MACK WITH MERITOR "Q" E-5093 1 2 Camshaft Lock Ring
BRAKE WITH 50,000 LB. REAR E-1113 2 2 Washer
AXLE E-5095 3 2 Camshaft Spacer Washer
E-654 4 4 Camshaft Seal
Contains New Style E-5512 E-5512 5 4 Camshaft Bushing
Moly-impregnated Spider E-3859 6 2 Camshaft Seal
Bushing.
1-200
1
CAMSHAFT REPAIR KITS
E-2088AHD-2 For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL MERITOR E-2380 1 1 Camshaft Outer Bushing
"P" SERIES TRAILER BRAKES E-1271 2 1 Camshaft Inner Bushing
E-1272 3 1 Camshaft Seal
With 1-1/2" Dia. Camshafts. E-1318AHD 4 1 Camshaft Support Bracket
Contains Lock Rings for E-564 5 4 Camshaft Spacer Washer
Camshafts with narrow or wide E-526 6 4 Camshaft Lock Ring
grooves. Contains E-1318AHD E-1416 7 1 Camshaft Seal
Heavy-Duty Support Assembly. E-4736 8 1 Camshaft Lock Ring
Half kit includes exactly half of Kit
E-2088AHD for one wheel end.
1-201
CAMSHAFT REPAIR KITS
E-2679A For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR "P" SERIES E-2551 1 2 Camshaft Bushing
TRAILER BRAKES E-1318A 2 2 Camshaft Support Bracket
E-4736 3 2 Camshaft Lock Ring
Use One-Piece Green Spider E-564 4 8 Camshaft Spacer Washer
Bushing in Place of E-943 E-526 5 4 Camshaft Lock Ring
Two-Piece Split Bushing. E-654 6 2 Camshaft Seal
1-202
1
CAMSHAFT REPAIR KITS
E-3520A-2 For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL MERITOR E-564 1 1 Camshaft Spacer Washer
4000-6000 SERIES TRAILER E-1318A 2 1 Camshaft Support Bracket
AXLES E-801 3 1 Lock Ring
E-2405 4 1 Camshaft Seal
With 1-5/8" Dia. Camshafts. Also E-2406 5 1 Camshaft Seal
used for 12-1/4" "Q" Brakes. E-2407 6 1 Camshaft Outer Bushing
Contains Lock Rings for E-2408 7 1 Camshaft Inner Bushing
Camshafts with narrow or wide E-1569 8 1 Camshaft Lock Ring
grooves. Half kit includes exactly E-1113 9 1 Washer
half of Kit E-3520A for one wheel E-2411A 10 2 Camshaft Spacer Washer
end.
E-5093 11 1 Camshaft Lock Ring
1-203
CAMSHAFT REPAIR KITS
E-3989AHD For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR LATE MODEL MERITOR E-2690A 1 2 Camshaft Bushing
4000-6000 SERIES TRAILER E-2411A 2 4 Camshaft Spacer Washer
AXLES E-3991 3 4 Camshaft Seal
E-1569 4 2 Camshaft Lock Ring
With 1-5/8" Dia. Camshafts. E-564 5 2 Camshaft Spacer Washer
Alternate Kit for E-3520AHD. E-1318AHD 6 2 Camshaft Support Bracket
Contains Lock Rings for E-1113 7 2 Washer
Camshafts with narrow or wide E-801 8 2 Lock Ring
grooves. Contains E-1318AHD E-5093 9 2 Camshaft Lock Ring
Heavy- Duty Support Assembly.
1-204
1
CAMSHAFT REPAIR KITS
E-9078 For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR "Q" AND "Q E-6080 1 2 Camshaft Bushing
PLUS" TRAILER AXLE BRAKES E-1318A 2 2 Camshaft Support Bracket
WITH PRESS-IN POWDERED E-2405 3 4 Camshaft Seal
METAL SPIDER BUSHING E-2411A 4 4 Camshaft Spacer Washer
E-9073 5 2 Camshaft Head Washer
Contains enough parts to service E-1113 6 4 Washer
Forged or Fabricated Brake E-564 7 2 Camshaft Spacer Washer
Spiders and Camshafts with E-9074 8 2 Camshaft Spacer Washer
either 1-25/32" or 2-5/64" E-9075 9 2 Camshaft Spacer Washer
Camshaft Journal. E-5093 10 2 Camshaft Lock Ring
E-1569 11 2 Camshaft Lock Ring
E-9077 12 2 Camshaft Lock Ring
1-205
CAMSHAFT REPAIR KITS
E-9079 For 16-1/2" Dia. Cam Brakes Meritor
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR MERITOR "Q" AND "Q E-6076 1 2 Camshaft Bushing
PLUS" TRAILER AXLE BRAKES E-1318A 2 2 Camshaft Support Bracket
WITH BOLT-ON POWDERED E-5093 3 2 Camshaft Lock Ring
METAL SPIDER BUSHING ON E-1113 4 2 Washer
FABRICATED SPIDERS E-564 5 2 Camshaft Spacer Washer
E-6077 6 2 Camshaft Washer
E-2405 7 4 Camshaft Seal
E-9072 8 2 Camshaft Spacer Washer
E-9077 9 2 Camshaft Lock Ring
NSS 1 10 8 Screw
E-801 11 2 Lock Ring
1-206
1
CAMSHAFT REPAIR KITS
E-2680 For 16-1/2" Dia. Cam Brakes Spicer
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR SPICER (DANA) AXLE E-807 1 2 Bronze Camshaft Bushing
E-1416 2 4 Camshaft Seal
With Spherical Cam Bushings E-656 3 2 Camshaft "D" Washer
E-719 4 2 Camshaft Spacer Washer
E-580 5 2 Camshaft Spacer Washer
E-526 6 4 Camshaft Lock Ring
E-2517 7 2 Camshaft Bushing
E-1314 8 4 Camshaft Seal
E-5093 9 2 Camshaft Lock Ring
E-2287 For 16-1/2" Dia. Cam Brakes Spicer and Standard Forge
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR SPICER and STANDARD E-1416A 1 4 Camshaft Seal
FORGE LATE MODEL A-17S, E-719 2 2 Camshaft Spacer Washer
A-19S, A22-S AXLES E-759 3 2 Camshaft Spider Bushing
E-2102 4 2 Camshaft Bushing
With Weld-on Spiders E-526 5 4 Camshaft Lock Ring
E-2409 6 2 Camshaft Spacer Washer
E-580 7 2 Camshaft Spacer Washer
E-5093 8 2 Camshaft Lock Ring
E-801 9 2 Lock Ring
E-1113 10 4 Washer
1-207
CAMSHAFT REPAIR KITS
E-2287-2 For 16-1/2" Dia. Cam Brakes Spicer and Standard Forge
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR SPICER and STANDARD E-1416A 1 2 Camshaft Seal
FORGE LATE MODEL A-17S, E-719 2 1 Camshaft Spacer Washer
A-19S, A22-S AXLES E-759 3 1 Camshaft Spider Bushing
E-2102 4 1 Camshaft Bushing
With Weld-on Spiders. Half kit E-526 5 2 Camshaft Lock Ring
includes exactly half of Kit E-2409 6 1 Camshaft Spacer Washer
E-2287 for one wheel end. E-580 7 1 Camshaft Spacer Washer
E-5093 8 1 Camshaft Lock Ring
E-801 9 1 Lock Ring
E-1113 10 2 Washer
E-2087 For 16-1/2" Dia. Cam Brakes Standard Forge and Kershaw
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR ALL EARLY MODEL E-536 1 2 Camshaft Bushing
STANDARD FORGE and E-654 2 4 Camshaft Seal
KERSHAW AXLES E-1416A 3 4 Camshaft Seal
E-656 4 2 Camshaft "D" Washer
E-719 5 2 Camshaft Spacer Washer
E-580 6 2 Camshaft Spacer Washer
E-526 7 4 Camshaft Lock Ring
E-759 8 2 Camshaft Spider Bushing
E-2087-2 For 16-1/2" Dia. Cam Brakes Standard Forge and Kershaw
APPLICATION & GENERAL
INFORMATION EUCLID NO. ITEM QTY DESCRIPTION
FOR ALL EARLY MODEL E-536 1 1 Camshaft Bushing
STANDARD FORGE and E-654 2 2 Camshaft Seal
KERSHAW AXLES E-1416A 3 2 Camshaft Seal
E-656 4 1 Camshaft "D" Washer
Half kit includes exactly half of Kit E-719 5 1 Camshaft Spacer Washer
E-2087 for one wheel end. E-580 6 1 Camshaft Spacer Washer
E-526 7 2 Camshaft Lock Ring
E-759 8 1 Camshaft Spider Bushing
1-208
1
CAMSHAFT SUPPORT BRACKETS
APPLICATION & GENERAL
EUCLID NO. LOCATION INFORMATION REPLACES
E-11445 Left Hand CAMSHAFT SUPPORT BUSHING
ASSEMBLY WITH GREASABLE
BUSHING
E-2103 FOR SPICER AND STD. FORGE 12-1/4" Std. Forge 209999-019
DIA. BRAKES Dana/Spicer M12WH112X
E-2104 FOR SPICER AND STD. FORGE 16-1/2" Std. Forge 209108-001
DIA. BRAKES Std. Forge 209999-018
Dana/Spicer M16WH101X
Includes: E-2102 Bushing. For Retainer Dana/Spicer M16WH113X
Plates only, order E-2365
1-209
CAMSHAFT SUPPORT BRACKETS
APPLICATION & GENERAL
EUCLID NO. LOCATION INFORMATION REPLACES
E-9785A Left Hand FOR SPICER (DANA) 5" ROUND AXLE
WITH 12-1/4" DIA. BRAKES
XpresswayPlus.com
1-210
1
CAMSHAFT SUPPORT BUSHING ASSEMBLY
For Meritor Trailer Axles
1-211
CAMSHAFT SUPPORT BRACKETS AND ASSEMBLIES
EUCLID NO. REPLACES APPLICATION
E-4586 Fruehauf ACF-004024-001 For 16-1/2" Brakes. Used in E-4594 Bracket
Fruehauf AXA-000403-001 Assembly
E-4587 Fruehauf ACF-004021-001 For 16-1/2" and 12-1/4" Brakes. Sold as Set Only.
Fruehauf ACF-004022-001 Includes One of each Retainer Plate. Bushing not
included.
1-212
1
CAMSHAFT TUBE ENCLOSURES FOR TRAILERS
1-213
SUPPORT BRACKET MOUNTING PLATES
EUCLID NO. GENERAL INFORMATION
E-10946 Adapter plate with Haldex adjuster control arm slot for 1-7/8" O.D. cam tube
E-10947 Adapter plate with Haldex adjuster control arm slot for 2" O.D. cam tube
E-4739 Universal standard adapter for 1-7/8" O.D. cam tube enclosures
E-4935 Standard adapter for Fruehauf Propar, 2" O.D. cam tube enclosures
E-8906 Universal standard adapter for 2" O.D. cam tube enclosures
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
1-214
1
CAMSHAFT BUSHINGS
APPLICATION AND
EUCLID BUSHING GENERAL
NO. I.D. O.D. LENGTH TYPE REPLACES INFORMATION
E-2732 1-1/4" 1-7/16" 1" Bronze Wagner F32976 Available only in
Wagner FC032976 Camshaft Repair Kit
E-3353A. For Wagner
Front Axle Brake.
E-3877 1-1/4" 1-5/8" 1-3/16" Nylon Meritor 1225R1136
E-3447 1-1/4" 1-7/8" 1-5/32" Nylon Meritor 1225M897 For Meritor "T" Series.
E-5127 1-1/4" 1-7/8" 1-5/16" Nylon Eaton 1006530 For Eaton 15" x 4"
Eaton 1008220 Single Anchor Pin Front
Brake.
1-215
CAMSHAFT BUSHINGS
APPLICATION AND
EUCLID BUSHING GENERAL
NO. I.D. O.D. LENGTH TYPE REPLACES INFORMATION
E-2716 1-1/2" 1-11/16" 1-11/16" Bronze Wagner F33602 Available only in
Wagner FC033602 Camshaft Repair Kit
E-3354. For Wagner
Drive Axle Brake.
E-1271 1-1/2" 1-3/4" 1-3/16" Meritor 1225J634 Inner bushing for Meritor
Trailmobile 19090 5000 Series axles with
Dana/Spicer 28-1253 1-1/2" diameter
Eaton 3-2152 camshafts.
1-216
1
CAMSHAFT BUSHINGS
APPLICATION AND
EUCLID BUSHING GENERAL
NO. I.D. O.D. LENGTH TYPE REPLACES INFORMATION
E-759 1-1/2" 1-7/8" 1-1/2" Nylon Eaton 3-2147
Std. Forge 405129
E-602 1-1/2" 1-7/8" 2" Bronze Std. Forge 405123 Bronze version of E-661.
Dana/Spicer M10WJ182
Std. Forge UB-1126
E-11449 1-1/2" 2" 1-1/2" Hendrickson Turner B-28898 Bronze. For Hendrickson
INTRAAX 16-1/2" brake.
E-2361 1-1/2" 2-1/8" 1" Nylon Meritor 1125P640 NOTE: For use in
Meritor 1225P640 E-1318A Assembly Only.
Meritor 1225R1058 Do not use in
Eaton 3-2161 E-1318AHD. Use
E-1314 O-Ring on each
side.
1-217
CAMSHAFT BUSHINGS
APPLICATION AND
EUCLID BUSHING GENERAL
NO. I.D. O.D. LENGTH TYPE REPLACES INFORMATION
E-1385 1-1/2" 2-3/4" 2" Molybdenum Eaton 820185
Eaton B-2028-A
E-2695 1-1/2" 2-3/4" 2-1/2" Nylon Eaton 1002262 Eaton 501 Series.
Eaton 3-2715 Includes 2 E-1416A
Seals.
E-2408 1-5/8" 1-7/8" 1-1/8" Meritor 1225B834 Inner bushing for Meritor
Dana/Spicer 28-1241 4000-6000 Series 121
Eaton 3-2154 axles with 1-5/8"
Trailmobile 38-2408 diameter camshafts.
E-6080 1-5/8" 2" 1" Powdered Meritor 1225N1158 Powdered Metal Bushing
metal for Meritor Axles with
cast spiders.
1-218
1
CAMSHAFT BUSHINGS
APPLICATION AND
EUCLID BUSHING GENERAL
NO. I.D. O.D. LENGTH TYPE REPLACES INFORMATION
E-2690A 1-5/8" 2" 1-3/16" Nylon Eaton 1002248
Eaton 1008412
Eaton 3-2714
FOR MERITOR FABRICATED SPIDERS WITH BOLT-ON BUSHING OR WELD-ON BUSHING RETAINER
EUCLID NO. I.D. LENGTH REPLACES GENERAL INFORMATION
E-11952 2" 1-13/16" Meritor A1-3105Q1213 Services one spider.
FOR MERITOR FABRICATED SPIDERS WITH BOLT-ON BUSHING OR WELD-ON BUSHING RETAINER
EUCLID
NO. I.D. O.D. LENGTH REPLACES GENERAL INFORMATION
E-9784 2" 2-3/8" 1-9/16" Meritor A3105D1148 For Retrofit on Bolt-on Bushing
Spiders. Services one spider.
For use with E-2670 bushing
assembly or E-6080 powdered
metal bushing.
E-9783 2" 2-1/2" 1-9/16" Meritor A3105K219 Services one spider. For use
with E-2670 bushing assembly
or E-6080 powdered metal
bushing.
1-219
CAMSHAFT SPIDER BUSHING KITS
1-220
1
CAMSHAFT SEALS
EUCLID
NO. REPLACES I.D. O.D. THICK APPLICATION
E-3469 Dana/Spicer 291283 17/32" 2-1/16" 1/4" For 1-1/4" Dia. Camshaft
Wagner 921029
Meritor A1205P1602
E-3878 Meritor A1205D2110 13/16" 1-3/4" 1/4" For Meritor 15" x 4" Front
Brakes
E-1272 Meritor 1205N924 1-13/64" 1-3/4" 1/8" For Pre-121 Meritor Axles. Use
Eaton 3-2166 on inboard side of Spider
E-5128 Eaton 1005846 1-1/4" 1-7/8" 1/16" For Eaton 15" x 4" Single
Eaton 3-2173 Anchor Pin Front Brake
Wagner 921031
Midland C66838
E-11451 Hendrickson Turner A-22885 1-1/2" 2" 3/16" For Hendrickson INTRAAX
16-1/2" brake.
E-1416 Meritor 1205M1105 1-1/2" 1-7/8" 3/16" For 1-1/2" Dia. Camshafts. Use
Eaton 3-2169 with Late Model Meritor and
Eaton 32172 Std. Forge Weld-on Spiders
Std. Forge 408101
Eaton 820110
Dana/Spicer M16HH100
E-1416A Eaton 1008047 1-1/2" 1-7/8" 1/4" Same as E-1416 except 1/4"
Eaton 40864 thick. Cannot be used on Late
Eaton 79903 Model Meritor Axles
Eaton 820111
Eaton B-1736
E-1314 Eaton 3-2162 1-1/2" 1-29/32" .21" For 1-1/2" Dia. Camshaft. Use
in E-1318AHD Assembly
E-2717 Wagner FC-031933 1-1/2" 2" 3/16" For Wagner Drive Axle Brake
E-654 Meritor 1205V1556 1-1/2" 2-1/16" 1/4" For 1-1/2" Dia. Camshaft
Meritor 1705M143
Eaton 3-2165
Std. Forge 408100
Std. Forge 408103
Eaton 820064
Meritor A1205V1556
Eaton B-1662
Dana/Spicer M10HH134
E-10848 Meritor A1205F136 1-1/2" 2-19/32" 1/4" For Type 1 Series Meritor
Coach Brakes
E-2406 Meritor 1205V1452 1-5/8" 1-7/8" 1/8" For Meritor 4000-6000 Series
Eaton 3-2168 Axles. Use on inboard side of
Spider
1-221
CAMSHAFT SEALS
EUCLID
NO. REPLACES I.D. O.D. THICK APPLICATION
E-3991 1-5/8" 2" 3/16" For use with E-2690A Bushing
in Meritor Trailer Axle Spiders
E-2405 Eaton 1002279 1-5/8" 2" 1/4" For Meritor 4000-6000 Series
Meritor 1205Q2123 Axles. Use on cam head side.
Meritor 1205U1451 For Eaton "501" Series Brake
Eaton 3-2167
Eaton 32717
E-3859 Meritor 1205G761 1-7/8" 2-1/16" 1/8" For outside diameter of Meritor
Meritor 1779J1024 Drive Axle Cam Tubes
Dana/Spicer 271203
CAMSHAFT SPACERS
EUCLID APPLICATION
NO. REPLACES O.D. I.D. THICK INFORMATION
E-10849 Meritor 2258E499 1-1/2" 17/32" "W" Series 14-1/2 For Meritor
Coach Type 1
E-3474 1 Meritor 1225C939 1-7/8" 1-1/2" 9/32" Nylon. For 15" x 3-1/2" and 15"
x 4" T-Series Type 2 Brakes.
Available only in Camshaft
Repair Kit E-3446
1-222
1
CAMSHAFT SPACER WASHERS
EUCLID APPLICATION
NO. REPLACES O.D. I.D. THICK PLATING INFORMATION
E-564 Meritor 1229J868 2" 1-17/32" 3/64" Plated Also used on Meritor
Eaton 2-2134 RN/RL Series
Eaton 2-807928
Fruehauf 219179
Eaton 3-2180
Trailmobile 37829
Std. Forge 403107
Eaton B-1221
Dana/Spicer M10HN139
E-5138 Eaton 1005203 2-1/4" 1-1/4" 1/32" Plated Outer Shim Washer For
Eaton 15" x 4" Single
Anchor Pin Front Brakes
E-5137 Eaton 1005202 2-1/4" 1-1/4" 1/16" Plated Inner Shim Washer For
Eaton 15" x 4" Single
Anchor Pin Front Brakes
E-10845 Meritor 1229X2936 2-1/4" 1-15/32" 1/32" Use with Meritor Coach
14-1/2"
E-581 Meritor 1229Q771 2-1/4" 1-17/32" 1/32" Plated Used on all 1-1/2" dia.
Trailmobile 40733 Camshafts
E-580 Meritor 1229R122 2-1/4" 1-17/32" 1/16" Plated Use on all 1-1/2" dia.
Fruehauf 219293 Camshafts Including End
Eaton 3-2181 Washer for Fruehauf
Eaton 43943 "Pro-Par" Camshaft
Eaton 820009
Fruehauf AXA-000432-001
Eaton B-1216
E-2409 Std. Forge 403149 2-1/4" 1-17/32" 3/32" Plated For Late Model Std. Forge
Wagner FC031954 12-1/4" Brake and Wagner
Dana/Spicer M10HS117 Front Axle Brake
E-9074 Meritor 1229B4136 2-1/4" 1-5/8" 1/32" None 16-1/2" "Q Plus" Brakes
E-2411A Eaton 105617 2-1/4" 1-5/8" 1/16" Plated For Meritor 4000-6000
Meritor 1229F2502 Series Axle Cam End
Meritor 1229X3118
E-3476 Meritor 1225R1136 2-3/8" 1-9/32" 1/8" None 15" x 3-1/2" and 15" x 4"
Meritor 1229Q277 T-Series Type 2 Brakes
E-3479 Eaton 105982 2-3/8" 1-1/2" 7/64" Plated Late Model "Q" Brake
Meritor 1229S2697
Eaton 3-2190
E-9072 Meritor 1229S4101 2-3/8" 1-5/8" 3/32" Plated Inner Washer for E-6076
Bolt-on Bushing
E-1565 Eaton 3-2183 2-3/8" 1-41/64" 1/16" Plated For "Pro-Par" Axle
Holland Hitch A-XA0417
Holland Hitch A-XA0417-1
Fruehauf AXA-000417-001
E-3475 Meritor 1107D56 2-7/16" 1-9/32" 1/32" None 15" x 3-1/2" and 15" x 4"
T-Series Type 2 Brakes
E-719 Eaton 3-2711 2-7/16" 1-9/16" 1/8" Plated Also used on Meritor and
Std. Forge 403105 Shuler Axles
Dana/Spicer M10SS100
E-10800 2-7/16" 1-11/16" 1/8" None
E-3471 Meritor 1229B236 2-1/2" 1-5/16" 1/16" None 15" x 3-1/2" and 15" x 4"
T-Series Type 2 Brakes
E-3472 Meritor 1229P302 2-3/4" 1-1/2" 1/8" None 16-1/2" x 3" T-Series
Brakes
1-223
CAMSHAFT SPACER WASHERS
EUCLID APPLICATION
NO. REPLACES O.D. I.D. THICK PLATING INFORMATION
E-3473 Meritor 1229E811 3-1/8" 1-33/64" 1/16" None 15" x 3-1/2" and 15" x 4"
Eaton 820114 T-Series Type 1 Brakes
Eaton B-1740
E-3477 Meritor 1229F1618 3-1/8" 1-17/32" 1/8" None 16-1/4" x 3-1/2" T-Series
Brakes
CAMSHAFT WASHERS
EUCLID APPLICATION
NO. REPLACES O.D. I.D. THICK INFORMATION
E-3478 Meritor 1229N2250 1-1/2" 1/16" For Meritor "Q" Service Brakes
E-5482 Eaton 2-806380 1-1/2" 1/16" Cam Head Washer for Eaton
"ES" Brakes
E-9075 Meritor 1229C4137 2-3/8" 1-41/64" 11/32" Use with press-in nylon or
metal Spider Bushings and
Camshafts with 2" upper
bearing journals
E-10857 Meritor 1229S435 2-7/16" 1-17/32" 1/16" For Meritor "W" Series 14-1/2"
E-6077 Meritor 1229R4100 2-11/16" 1-5/8" 1/16" Cam Head Washer for Meritor
Trailer Axles with Fabricated
Spiders
E-10843 Meritor 1229S747 2-3/4" 1-9/16" 1/16" For Meritor "W" Series 14-1/2"
1-224
1
CAMSHAFT WASHERS
EUCLID APPLICATION
NO. REPLACES O.D. I.D. THICK INFORMATION
E-2404 Std. Forge 403150 3-7/8" x 2- 1-17/32" 1/16" For Late Model Std. Forge
Dana/Spicer M10HS115 7/16" 12-1/4" Brake
E-1408 Std. Forge 403112 3-1/2" 1-17/32" 1/16" For 12-1/4" Dia. Brakes
E-656 Meritor 1229E837 3-7/8" 1-1/2" 1/16" For 1-1/2" dia. Camshafts.
Meritor 1229G1463 Can be used on Fruehauf
Fruehauf 219148 Camshafts by reversing
Fruehauf 219158
Eaton 3-2179
Trailmobile 37081
Std. Forge 403108
Eaton B-1212-1
Dana/Spicer M10HN152
E-9073 Meritor 1229A4135 3-7/8" 1-5/8" 1/16" For 16-1/2" "Q Plus" Brakes
E-9076 Meritor 1229J4092 31/32" 3/32" 15" x 4" "Q" and 16-1/2" "P"
Brakes
E-2734 Wagner F-31921 1-1/8" 1/32" For Wagner Front Axle Brake.
Wagner FC031921 Available only in Camshaft Repair
Kit E-3353A
E-801 Meritor 1229X1116 1-1/8" 1/16" Lock Ring. For Meritor 4000-6000
Eaton 2-2137 Series Axles. Also used on 1-1/4"
Eaton 2-807929 Anchor Pins with grooves.
Std. Forge 214100
Dana/Spicer 31624
Eaton 820007
Eaton B-1214
Wagner FC031961
E-5093 Meritor 1229D2942 1-5/32" 3/32" 15" x 3-1/2" x 4" "T" Brakes.
Eaton 32144 16-1/2" "Q" Brakes.
E-2720 Wagner F-31955 1-5/16" 1/16" For Wagner Drive Axle Brake
Wagner FC031955
1-225
CAMSHAFT LOCK RINGS
EUCLID
NO. REPLACES I.D. THICK APPLICATION INFORMATION
E-4736 Meritor 1229Q2851 1-3/8" 3/32" Wider snap ring for use with
Meritor Drive Axle Camshafts. Not
for use with Euclid Replacement
Camshafts.
E-526 Meritor 1229H866 1-31/64" 1/16" For All 1-1/2" Dia. Camshafts
Meritor 1229Z1118
Fruehauf 219160
Holland Hitch 219160X
Eaton 3-2186
Eaton 820095
Eaton B-1716
E-1569 Eaton 3-2187 1-1/2" 1/16" For Meritor 4000-6000 Series Axle
Holland Hitch A-XA0418 and "Pro-Par" Axle with 1-5/8"
Holland Hitch A-XA0418-1 Dia. Camshaft
Fruehauf AXA-000418-001
E-910 Std. Forge 21404 1-1/2" 1/16" For 1-1/2" Dia. Camshaft. Use in
Eaton 3-2716 Cam Front Lock Groove
Dana/Spicer 38038
Eaton 820008
Eaton B-1215
E-9077 Meritor 1229T4102 1-5/8" 3/32" 16-1/2" "Q Plus" Brakes
1-226
1
MANUAL SLACK ADJUSTERS
Listed by Cam Spline Size
APPLICATION &
FITS CAM GENERAL
EUCLID NO. TYPE REPLACES SPLINE ARM LENGTH INFORMATION
E-2761 LH Bendix 278289 1-1/4"-10 4" - 5" 5/8" Offset Arm for
Eaton 8-2076 Wagner Brakes. 1/2"
Wagner AE97535 Clevis Hole.
Midland KN49030
E-2760 RH Bendix 278288
Eaton 8-2075
Wagner AE97534
Midland KN49020
E-4904 Bendix 278302 4-1/2" - 5-1/2" For All 1-1/4" -10 Spline
Midland KN48031 Camshafts
1-227
MANUAL SLACK ADJUSTERS
Listed by Cam Spline Size
APPLICATION &
FITS CAM GENERAL
EUCLID NO. TYPE REPLACES SPLINE ARM LENGTH INFORMATION
E-2763 LH Bendix 278295 1-1/4"-10 4-1/2" - 5-1/2" 5/8" Offset Arm for
Eaton 8-2078 Wagner Brakes. 1/2"
Wagner AC32381 Clevis Hole.
Midland KN49010
E-2762 RH Bendix 278294
Eaton 8-2077
Wagner AC32382
Midland KN49000
E-939 Bendix 222477 5" - 6" For All 1-1/4" -10 Spline
Bendix 278303 Camshafts
Midland KN48001
1-228
1
MANUAL SLACK ADJUSTERS
Listed by Cam Spline Size
APPLICATION &
FITS CAM GENERAL
EUCLID NO. TYPE REPLACES SPLINE ARM LENGTH INFORMATION
E-612-BK 1 Sloan 2010 1-1/2"-10 5" - 6" - 7"
Bendix 278312
Bendix 278323
Midland KN47001
Dana/Spicer M10WR119
E-612HD Midland 18500
Midland 18501
Std. Forge 212102
Std. Forge 212116
Bendix 27323
Bendix 278010
Bendix 278045
Bendix 278719
Eaton 8-2068
Wagner AE2220
Wagner AE22451
Midland KN47081
Dana/Spicer M10WR119
Dana/Spicer M16WR100
E-6113 Bendix 278008 5-1/2" - 6-1/2" Same as E-940 except
has 5/8" Bushed Clevis
Hole.
E-940-BK 1 Sloan 2020
Sloan 2023
Sloan 2089
Bendix 277959
Bendix 278321
Bendix 278326
Meritor A693275G501
Midland KN47011
E-940HD Bendix 278008
Bendix 278016
Eaton 8-2074
Midland KN52070
E-6111 LH Bendix 288540 1-1/2" Offset Arm for
Mack 20,000 lb. Front
Axles.
E-6112 RH Bendix 288539
1-229
MANUAL SLACK ADJUSTERS
Listed by Cam Spline Size
APPLICATION &
FITS CAM GENERAL
EUCLID NO. TYPE REPLACES SPLINE ARM LENGTH INFORMATION
E-2669 LH Sloan 2045 1-1/2"-10 6" - 7" 5/8" Offset Arm.
Bendix 278231
Bendix 279947
Eaton 8-2080
E-2668 RH Sloan 2046
Bendix 278232
Bendix 279946
E-2458-BK 1 Bendix 103345 1-1/2"-28 5" - 6" - 7"
Sloan 2011
Sloan 2031
Sloan 2096
Bendix 286965
Meritor A3275X596
Meritor A43275X596
E-2458HD Bendix 101207
Bendix 101215
Eaton 8-2069
Meritor A3275X596
Meritor A43275X596
E-2459-BK 1 Sloan 2021R 5-1/2" - 6-1/2"
Sloan 2029
Sloan 2066
Bendix 288753
Meritor A23275X596
Midland KN44061
E-2459HD Bendix 101214
Midland 18534
Bendix 286740
Bendix 287899
Meritor A23275X596
E-5498 Bendix 101883 6" Curved Arm for Meritor
Eaton 82072 12-1/4" "Q" Brakes
Meritor A3275J686
E-6110 RH
1-230
1
MANUAL SLACK ADJUSTERS
Listed by Cam Spline Size
APPLICATION &
FITS CAM GENERAL
EUCLID NO. TYPE REPLACES SPLINE ARM LENGTH INFORMATION
E-9106 1-5/8"-37 5-1/2"
XpresswayPlus.com
1-231
MERITOR AUTOMATIC SLACK ADJUSTERS
FEATURES AND BENEFITS
A. ASA Housing
• Flexible design options provide improved
packaging:
— "Handed" and "unhanded versions fit
various packaging requirements (unhanded
version shown).
— Lightest weight automatic slack adjuster in
the market.
B. Piston
• Various pistons to adapt to unique vehicle
vocations and duty cycles.
C. Boot
• Press-in and sealed for maximum durability. How the Meritor Automatic Slack
D. Pull Pawl Adjuster Work:
• Design eliminates the need to remove pawl for When the brakes are first actuated...
manual brake adjustment. 1. The air chamber pushrod moves beyond the
• Built-in safety feature so brake cannot predetermined optimum stroke length.
inadvertently be backed-off.
2. The change in geometry between the chamber
E. Worm Gear pushrod and slack lever arm raises the slack
• Buttress type provides increased strength adjuster actuator rod.
for longer life. 3. the piston contacts the retaining ring
— Lubrication hole and which lifts the actuator.
groove provide 4. The actuator has spiral serrations on
lubrication to it which jump over the serration on the
splines, helping pawl, only if the adjustment is required.
eliminate corrosion
and seizing up, and 5. The components remain in the
resulting in easier position until the start of the return
servicing. stroke.
1-232
1
MERITOR AUTOMATIC SLACK ADJUSTERS
(MOST POPULAR/CLEVISED NUMBERS)
MERITOR LEVER
EUCLID NO. CLEVISED NO. TYPE SPLINE SIZE LENGTH CLEVIS THREAD FOR CHAMBER
E-11395 R801001 unhanded 1-1/4"-10 5-1/2" 1/2"-20 str 16
E-11396 R801002 unhanded 1-1/4"-24 5-1/2" 1/2"-20 str 16
E-11397 R801003 unhanded 1-1/4"-24 5-1/2" 5/8"-18 str 16, 20
E-11398 R801041 unhanded 1-1/2"-10 5-1/2" 5/8"-18 str 24, 30
E-11399 R801042 unhanded 1-1/2"-10 6" 5/8"-18 str 30
E-11400 R801072 unhanded 1-1/2"-28 5-1/2" 5/8"-18 str 20, 24, 36 drum
E-11401 R801073 unhanded 1-1/2"-28 5-1/2" 5/8"-18 str 24, 30
E-11402 R801074 unhanded 1-1/2"-28 6" 5/8"-18 str 30
E-11404 R801079 unhanded 1-1/2"-28 5-1/2" 5/8"-18 str 16, 20
E-11405 R801101 unhanded 1-5/8"-37 5-1/2" 5/8"-18 str 24, 30
E-11406 R801102 unhanded 1-5/8"-37 6" 5/8"-18 str 30
E-11407 R802070 TYPE A 1-1/4"-24 5-1/2" 5/8"-18 str 20
E-11408 R802071 TYPE B 1-1/4"-24 5-1/2" 5/8"-18 str 20
E-11409 R802316 TYPE A 1-1/2"-10 5-1/2" 5/8"-18 str 24, 30
E-11410 R802317 TYPE B 1-1/2"-10 5-1/2" 5/8"-18 str 24, 30
E-11411 R802332 TYPE A 1-1/2"-10 5-1/2" 5/8"-18 str 36
E-11412 R802333 TYPE B 1-1/2"-10 5-1/2" 5/8"-18 str 36
E-11413 R802380 TYPE A 1-1/2"-10 7" 3/4"-16 str 30 drum
E-11414 R802381 TYPE B 1-1/2"-10 7" 3/4"-16 str 30 drum
E-11415 R802444 TYPE A 1-1/2"-28 5-1/2" 5/8"-18 str 20, 24 disc, 36 drum
E-11416 R802445 TYPE B 1-1/2"-28 5-1/2" 5/8"-18 str 20, 24 disc, 36 drum
E-11417 R802446 TYPE A 1-1/2"-28 5-1/2" 5/8"-18 str 24, 30
E-11418 R802447 TYPE B 1-1/2"-28 5-1/2" 5/8"-18 str 24, 30
E-11419 R802462 TYPE B 1-1/2"-28 5-1/2" 5/8"-18 str 30 disc
E-11420 R802463 TYPE A 1-1/2"-28 5-1/2" 5/8"-18 str 30 disc
E-11421 R802486 TYPE A 1-1/2"-28 6" 5/8"-18 str 30
E-11422 R802487 TYPE B 1-1/2"-28 6" 5/8"-18 str 30
E-11423 R802490 TYPE A 1-1/2"-28 6" 5/8"-18 str 36
E-11424 R802491 TYPE B 1-1/2"-28 6" 5/8"-18 str 36
E-11403 R802512 TYPE A 1-1/2"-28 6-1/2" 5/8"-18 str 36
E-11902 R802513 TYPE B 1-1/2"-28 6-1/2" 5/8"-18 str 36
E-11425 1 R802666 TYPE A 1-1/2"-10 5-1/2" 5/8"-18 str 36
E-11426 1 R802667 TYPE B 1-1/2"-10 5-1/2" 5/8"-18 str 36
NOTE: The Slack Adjuster must be installed so the pawl can be removed during maintenance.
1-233
MERITOR MISC AUTOMATIC SLACK ADJUSTER PARTS
EUCLID NO. MERITOR NO. THREAD SIZE CLEVIS TYPE APPLICATION INFORMATION
E-11427A R810024 1/2"-20 Offset For standard type 16 chambers. Clevis kit
includes Lightweight Clevis, pins and clips.
E-11899 R810022 1/2"-20 Offset For long stroke type 16 chambers. Clevis
kit includes Lightweight Clevis, pins and
clips.
E-11429A R810025 5/8"-18 Offset For standard type 20, 24, 30, 36 chambers.
Clevis kit includes Lightweight Clevis, pins
and clips.
E-11901 R810023 5/8"-18 Offset For long stroke type 20, 24, 30, 36
chambers. Clevis kit includes Lightweight
Clevis, pins and clips.
E-11428A R810018 1/2"-20 Straight 1-3/8" CL-CL of pins. For standard type 16
chambers. Clevis kit includes Lightweight
Clevis, pins and clips.
E-11898 R810020 1/2"-20 Straight For long stroke type 16 chambers. Clevis
kit includes Lightweight Clevis, pins and
clips.
E-11430A R810019 5/8"-18 Straight 1-3/8" CL-CL of pins. For standard type 20,
24, 30, 36 chambers. Clevis kit includes
Lightweight Clevis, pins and clips.
E-11900 R810021 5/8"-18 Straight For long stroke type 20, 24, 30, 36
chambers. Clevis kit includes Lightweight
Clevis, pins and clips.
E-11431 R810012 3/4"-16 Straight 1-3/8" CL-CL of pins. For standard type 20,
24, 30, 36 chambers.
1-234
1
EUCLID/HALDEX SELF-ADJUSTING BRAKE ADJUSTERS
STEERING AXLE (NON-DRIVE) APPLICATIONS FOR 15", 16-1/4" AND 16-1/2" BRAKES
EUCLID KIT INCLUDES STRAIGHT/ SPLINE ARM BUSHING
NO. BRACKET NO. ANGLE OFFSET SIZE LENGTH I.D. APPLICATION
E-6900A E-6983 0° Straight 1-1/4"-10 5-1/2" 1/2"-5/8" Double Bend Control Arm.
Standard Steering Axle
Brakes.
Replaces 400-10001
E-6902A E-6984 0° Straight 1-1/4"-24 5-1/2" 1/2"-5/8" Double Bend Control Arm.
Standard Steering Axle
Brakes.
Replaces 400-10004
E-6903A E-6983 0° Straight 1-1/2"-10 5-1/2" 1/2"-5/8" Double Bend Control Arm.
Standard Steering Axle
Brakes.
Replaces 400-10005
E-6905A E-6983 0° Straight 1-1/2"-28 5-1/2" 1/2"-5/8" Double Bend Control Arm.
Standard Steering Axle
Brakes.
Replaces 400-10008
E-6951A E-6985 16° Straight 1-1/2"-28 5-1/2" 1/2" For Meritor Air Disc Brake.
Replaces 400-10402
E-6906A E-6983 22° LH 5/8" 1-1/4"-10 5-1/2" 1/2"-5/8" Double Bend Control Arm.
For Standard Steering Axle
Brakes with 5/8" Offset
Arm.
Replaces 400-10003
E-6907A E-6983 22° RH 5/8" 1-1/4"-10 5-1/2" 1/2"-5/8" Double Bend Control Arm.
For Standard Steering Axle
Brakes with 5/8" Offset
Arm.
Replaces 400-10002
E-6981 E-6984 22° LH 5/8" 1-1/4"-24 5-1/2" 1/2"-5/8" Double Bend Control Arm.
For Standard Steering Axle
Brakes with 5/8" Offset
Arm.
Replaces 400-10041
E-6982 E-6984 22° RH 5/8" 1-1/4"-24 5-1/2" 1/2"-5/8" Double Bend Control Arm.
For Standard Steering Axle
Brakes with 5/8" Offset
Arm.
Replaces 400-10040
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-235
EUCLID/HALDEX SELF-ADJUSTING BRAKE ADJUSTERS
STEERING AXLE (NON-DRIVE) APPLICATIONS FOR 15", 16-1/4" AND 16-1/2" BRAKES
EUCLID KIT INCLUDES STRAIGHT/ SPLINE ARM BUSHING
NO. BRACKET NO. ANGLE OFFSET SIZE LENGTH I.D. APPLICATION
E-6910 E-6956 22° RH 1-1/2" 1-1/2"-10 5-1/2" 1/2" For Mack 16,000 lb.-up
Steering Axle Brakes with
1-1/2" Offset Arm.
Replaces 400-10030
E-6911 E-6956 22° LH 1-1/2" 1-1/2"-10 5-1/2" 1/2" For Mack 16,000 lb.-up
Steering Axle Brakes with
1-1/2" Offset Arm.
Replaces 400-10031
E-6913 E-6956 22° LH 1-1/2" 1-1/2"-28 5-1/2" 1/2"-5/8" For Mack 16,000 lb.-up
Steering Axle Brakes with
1-1/2" Offset Arm.
Replaces 400-10010
E-6912 E-6956 22° RH 1-1/2" 1-1/2"-28 5-1/2" 1/2"-5/8" For Mack 16,000 lb.-up
Steering Axle Brakes with
1-1/2" Offset Arm.
Replaces 400-10009
E-6914A E-6983 16° Straight 1-1/2"-10 6" 1/2" Double Bend Control
Arm. For Mack Drive
Axle Brakes.
Replaces 400-10145
E-6918A E-6983 16° Straight 1-1/2"-28 6" 1/2" Double Bend Control
Arm. For Mack Drive
Axle Brakes.
Replaces 400-10144
E-6919A E-6983 16° Straight 1-1/2"-28 5-1/2" - 6-1/2" 1/2" Double Bend Control
Arm. For Mack Drive
Axle Brakes.
Replaces 400-10146
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-236
1
EUCLID/HALDEX SELF-ADJUSTING BRAKE ADJUSTERS
DRIVE AXLE APPLICATIONS FOR 16-1/2" AND 18" BRAKES
EUCLID KIT INCLUDES STRAIGHT/ SPLINE BUSHING
NO. BRKT NO. ANGLE OFFSET SIZE ARM LENGTH I.D. APPLICATION
E-6951A E-6985 16° Straight 1-1/2"-28 5-1/2" 1/2" For Meritor Air Disc
Brake.
Replaces 400-10402
E-6923B E-10262 34° Straight 1-1/2"-10 5" - 6" 1/2"-5/8" For Standard Drive Axle
Brakes.
Replaces 400-10142
E-6924B E-10262 34° Straight 1-1/2"-10 5-1/2" - 6-1/2" 1/2"-5/8" For Standard Drive Axle
Brakes.
Replaces 400-10143
E-6925B E-10262 34° Straight 1-1/2"-28 5" - 6" 1/2"-5/8" For Standard Drive Axle
Brakes.
Replaces 400-10140
E-6927B E-10262 34° Straight 1-1/2"-28 5-1/2" - 6-1/2" 1/2"-5/8" For Standard Drive Axle
Brakes.
Replaces 400-10141
1-237
EUCLID/HALDEX SELF-ADJUSTING BRAKE ADJUSTERS
TRAILER AXLE APPLICATIONS FOR 16-1/2" BRAKES
EUCLID KIT INCLUDES STRAIGHT/ SPLINE ARM BUSHING
NO. BRACKET NO. ANGLE OFFSET SIZE LENGTH I.D. APPLICATION
E-6940 E-6967A 0° Straight 1-1/2"-10 5-1/2" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-10215
E-6936 E-6967A 0° Straight 1-1/2"-10 6" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-10216
E-6937 E-6966A 35° Straight 1-1/2"-10 6" 1/2"-5/8" Double Bend Control Arm.
3-Hole Dana Cam Bracket.
Improved, Longer Life
Bushing and Flat Anchor
Pin.
Replaces 400-10206
E-6944 E-6967A 0° Straight 1-1/2"-28 5-1/2" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-10211
E-6942 E-6967A 0° Straight 1-1/2"-28 6" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-10212
E-6947 E-6966A 0° Straight 1-5/8"-37 5-1/2" 1/2" Double Bend Control Arm.
For Fruehauf with New
Style 4-Hole Cam Bracket.
Improved, Longer Life
Bushing and Flat Anchor
Pin.
Replaces 400-10213
E-6946 E-6966A 0° Straight 1-5/8"-37 6" 1/2" Double Bend Control Arm.
For Fruehauf with New
Style 4-Hole Cam Bracket.
Improved, Longer Life
Bushing and Flat Anchor
Pin.
Replaces 400-10214
1-238
1
EUCLID/HALDEX SELF-SETTING ADJUSTING BRAKE ADJUSTERS
TRAILER AXLE APPLICATIONS FOR 16-1/2" BRAKES
EUCLID KIT INCLUDES STRAIGHT/ SPLINE ARM BUSHING
NO. BRACKET NO. ANGLE OFFSET SIZE LENGTH I.D. APPLICATION
E-11925 E-6967A 0° Straight 1-1/2"-10 5-1/2" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-20215
E-11926 E-6967A 0° Straight 1-1/2"-10 6" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-20216
E-11921 E-6967A 0° Straight 1-1/2"-28 5-1/2" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-20211
E-11922 E-6967A 0° Straight 1-1/2"-28 6" 1/2" Double Bend Control Arm.
For Meritor, Eaton,
Standard Forge with 4-Hole
Cam Bracket. Improved,
Longer Life Bushing and
Flat Anchor Pin.
Replaces 400-20212
E-11923 E-6966A 0° Straight 1-5/8"-37 5-1/2" 1/2" Double Bend Control Arm.
For Fruehauf with New
Style 4-Hole Cam Bracket.
Improved, Longer Life
Bushing and Flat Anchor
Pin.
Replaces 400-20213
E-11924 E-6966A 0° Straight 1-5/8"-37 6" 1/2" Double Bend Control Arm.
For Fruehauf with New
Style 4-Hole Cam Bracket.
Improved, Longer Life
Bushing and Flat Anchor
Pin.
Replaces 400-20214
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-239
EUCLID/HALDEX BRAKE ADJUSTER HARDWARE
APPLICATION & GENERAL
EUCLID NO. REPLACES INFORMATION
E-427K Haldex 427-10558 Includes 4 Cap Nuts, 4 Anchor Pins,
4 Bushings, Includes long life bushing
and redesigned flat anchor pin.
E-452A Haldex 452-10125 Long life control arm bushing for flat
anchor pin.
E-6985 E-6923A, E-6924A, E-6925A, E-6927A, Drive axle and air disc brake applications.
E-6951A Replaces 427-10543
E-10262 E-6923B, E-6924B, E-6925B, E-6927B Drive axle. Angled 1-1/4" x 7" strap.
Replaces 427-10553
E-10894 E-10892, E-10893 1-1/4" x 4-3/4" strap. For use with Kenworth 8 air bag
drive axle brakes.
Replaces 427-10554
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-240
1
EUCLID/HALDEX BRAKE ADJUSTER BRACKET KITS
EUCLID
BRACKET NO. USED IN SLACK KIT NO. APPLICATION
E-6956 E-6912, E-6913 Mack 16,000 lb. and up steer axle applications.
Replaces 427-10548
E-6966A E-6934, E-6946, E-6947, E-11923, 12-1/4" and 16-1/2" Fruehauf trailer axle applications
E-11924 with 4-hole camshaft support bracket. Includes new flat
anchor pin and re-designed, longer life bushing.
Replaces 427-10562
E-6967A E-6928, E-6932, E-6933, E-6936, 12-1/4" and 16-1/2" Meritor, Eaton, Spicer (Dana) and
E-6940, E-6942, E-6944, E-11921, Standard Forge trailer axle applications with 4-hole
E-11922, E-11925, E-11926 camshaft support bracket. Includes new flat anchor pin
and re-designed, longer life bushing.
Replaces 427-10565
XpresswayPlus.com
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-241
CREWSON INDUSTRIES
AUTOMATIC SLACK ADJUSTER KITS
FEATURES
Installation Guide
Procedure
3 REPOSITION CLEVIS
Guide fits on the S-Cam before Automatic
1 Slack Adjuster is installed.
1
5 without excessive manual adjustment that
wears adjuster components.
GUIDE FITS OVER S-CAM 5 INSTALL ASA
1-242
1
CREWSON INDUSTRIES AUTOMATIC SLACK ADJUSTER KITS
15" STEERING AXLE APPLICATION
INCLUDES APPLICATION & GENERAL
EUCLID KIT NO. CLEVIS SPLINE SIZE ARM LENGTH INFORMATION
E-6988A 5/8"-18 1-1/4"-10 5-1/2" For Meritor "T" Series & Eaton Single
Offset 5/8" Anchor Brakes.
E-6987A 5/8"-18 1-1/4"-10 5-1/2"
Straight
E-6990A 5/8"-18 1-1/4"-24 5-1/2" For Meritor "Q" and "T" Series Brakes.
Offset 5/8"
E-6989A 5/8"-18 1-1/4"-24 5-1/2"
Straight
E-6993A 5/8"-18 Straight 1-1/2"-28 5" - 6" For Eaton, Meritor and Spicer Brakes.
1-243
CREWSON INDUSTRIES AUTO-CHECK™
AUTOMATIC SLACK ADJUSTER KITS
INCLUDES SPLINE ARM CHAMBER CHAMBER APPLICATION & GENERAL
EUCLID NO. CLEVIS SIZE LENGTH SIZE STROKE INFORMATION
E-11880 1/2"-20 Straight 1-1/4"-10 5-1/2" Type 16/20 Standard For 15" Meritor and Eaton Steer
Axle Applications
E-10784A 5/8"-18 Straight 1-1/4"-10 5-1/2" Type 20/24 Standard
E-11872 5/8"-18 Straight 1-1/4"-10 6-1/2" Type 30 Standard For 16-1/2" Meritor, Eaton and
Spicer Trailer Axle Applcations.
E-11879 1/2"-20 Straight 1-1/4"-24 5-1/2" Type 16/20 Standard For Meritor Q & T Series Brakes.
E-11877 5/8"-18 Straight 1-1/4"-24 5-1/2" Type 24 Standard
E-10786A 5/8"-18 Straight 1-1/2"-10 5-1/2" Type 30 Long Stroke For 16-1/2" Meritor and Eaton
Drive Axle Applications.
E-10780A 5/8"-18 Straight 1-1/2"-10 5-1/2" Type 30 Standard
E-10789A 5/8"-18 Straight 1-1/2"-10 6" Type 30 Long Stroke For 16-1/2" Meritor, Eaton and
Spicer Trailer Axle Applications.
E-10782A 5/8"-18 Straight 1-1/2"-10 6" Type 30 Standard
E-10785A 5/8"-18 Straight 1-1/2"-28 5-1/2" Type 30 Long Stroke For 16-1/2" Meritor and Eaton
Drive Axle Applications.
E-10779A 5/8"-18 Straight 1-1/2"-28 5-1/2" Type 30 Standard
E-10788A 5/8"-18 Straight 1-1/2"-28 6" Type 30 Long Stroke For 16-1/2" Meritor, Eaton and
Spicer Trailer Axle Applications.
E-10781A 5/8"-18 Straight 1-1/2"-28 6" Type 30 Standard
E-11873 5/8"-18 Straight 1-1/2"-28 6-1/2" Type 30 Standard
E-10787A 5/8"-18 Straight 1-5/8"-37 6" Type 30 Long Stroke For 16-1/2" Fruehauf Trailer Axle
Applications.
E-10783A 5/8"-18 Straight 1-5/8"-37 6" Type 30 Standard
E-11875 5/8"-18 Straight 1-5/8"-37 6-1/2" Type 30 Standard
E-9133 5/8"-18 Straight Note: To be used with early design only. Pin C/L to C/L is
1-1/4". Color is Gold.
CAUTION: DO NOT MIX AUTOMATIC SLACK ADJUSTER BRANDS ON THE SAME VEHICLE.
1-244
1
SAFETY CHECK BRAKE GAUGES
1-245
PARTS FOR BENDIX WEDGE BRAKE
APPLICATION AND GENERAL
EUCLID NO. REPLACES SLOT WIDTH INFORMATION
E-2281 Bendix 318657 5/16" Twin Plex. Adjusting Screw. Use with
Bendix 445343 15" x 5, 6 and 7" shoes
E-2282 Dana/Spicer 43-7037 1/4" Non-Servo. Adjusting Screw. Use
Bendix 445342 with 15" x 3 and 3-1/2" shoes
Meritor KIT970
EUCLID
NO. DESCRIPTION REPLACES O.D. LENGTH APPLICATION
E-1217 Adjusting Nut Cap Bendix 316355
E-2164 Spring Damper Bendix 249943 29/32" 2" Use with E-2163 Spring.
Available only in Brake
Kits E-2157 and E-2158.
1-246
1
PARTS FOR BENDIX WEDGE BRAKE
EUCLID NO. REPLACES COIL O.D. LENGTH
E-1496 Bendix 316368 3/4" 1-1/2"
WEDGE ASSEMBLIES
EUCLID NO. REPLACES WEDGE ANGLE AXLE APPLICATION
E-2153 Bendix 285783 10° Trailer
Bendix 3200070
E-2155 Bendix 285785 14° Drive
Bendix 318599
Bendix 3200710
E-2156 Bendix 285786 18° Steering
Bendix 318601
Bendix 3200449
E-2154 Bendix 285784 12° Drive and Trailer
Bendix 318598
Bendix 3200709
1-247
KITS FOR BENDIX WEDGE BRAKES
E-2157 MAJOR OVERHAUL KIT FOR BENDIX "TWINPLEX" WEDGE BRAKE
EUCLID APPLICATION & GENERAL
ITEM QTY. NO. DESCRIPTION INFORMATION
1 2 E-2281 Adjusting Screw Universal for both left and right.
2 2 E-1214 Adjusting Piston Boot Includes E-2015 Wedge Brake
3 2 E-1215 Adjusting Nut Spring Lubricant (not shown). Services one
4 2 E-1216 Adjusting Nut Brake Assembly.
5 2 E-1217 Adjusting Nut Cap REPLACES:
6 2 E-1218 Adjusting Piston Bendix 100140
7 2 E-2162 Adjusting Spring
8 2 E-2161 Adjusting Lever
9 2 E-1486 Pin
10 2 E-1894 Anchor Pin
11 2 E-1230 Piston Boot
12 2 E-2163 Brake Shoe Return Spring
13 2 E-2164 Spring Damper
1-248
1
KITS FOR BENDIX WEDGE BRAKES
E-2746 OVERHAUL KIT FOR BENDIX "NON-SERVO" FRONT AXLE WEDGE BRAKE
EUCLID APPLICATION & GENERAL
ITEM QTY. NO. DESCRIPTION INFORMATION
1 2 E-1214 Adjusting Piston Boot Kit does not include E-2744 insert
2 2 E-1215 Adjusting Nut Spring which is not replaced in new brakes.
3 2 E-1216 Adjusting Nut Includes E-2015 Wedge Brake
4 2 E-1217 Adjusting Nut Cap Lubricant (not shown). Services one
5 2 E-1218 Adjusting Piston Brake Assembly.
6 2 E-1486 Pin REPLACES:
7 2 E-2161 Adjusting Lever Bendix 100150
8 2 E-2162 Adjusting Spring Bendix 100151
9 2 E-2281 Adjusting Screw
10 2 E-2552 Shoe Stabilizer Spring
11 2 E-2745 Brake Shoe Return Spring
1-249
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
ADJUSTING BOLTS
EUCLID NO. REPLACES APPLICATION AND GENERAL INFORMATION
E-2484 Meritor 2297D2370 For 12-1/4" RD Brakes and 15" Rear RD Brakes.
Meritor A2297L3158
E-3492 Meritor A2297V2882 For 15" Front RS and RD Brakes, Backing Plate
Mounted.
ADJUSTING SLEEVES
EUCLID NO. REPLACES APPLICATION AND GENERAL INFORMATION
E-3499 Meritor 2297N2874 For 15" Front RS and RD Brakes, Backing Plate
Mounted. Use with E-3492 Adjusting Bolt. Use with
E-5540 Pawl Assembly.
E-5531 Meritor 3280Y8189 Blue Plated. For 12-1/4" RD Brakes and 15" Rear
RD Brakes. Use with E-2484 or E-2485 Adjusting
Bolts. Use with E-5539 Pawl Assembly. Replaces
E-2486.
1-250
1
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
ADJUSTING PLUNGERS
WEDGE APPLICATION AND GENERAL
EUCLID NO. REPLACES DEGREE INFORMATION
E-5537 Meritor 2297C2863 12° Replaces E-1449
Meritor 2797C133
E-5538 Meritor 2297D2864 14° Replaces E-2736
Meritor 2797D134
ANCHOR PLUNGERS
WEDGE APPLICATION AND
EUCLID NO. LH/RH REPLACES DEGREE GENERAL INFORMATION
E-2135 LH Meritor 2297A5123 10° For Drive and Trailer
Meritor 2297W5327 Brakes.
Meritor 2797Y415
E-2134 RH Meritor 2297X5328
Meritor 2797X414
E-1137 LH Meritor 2297C419 12°
Meritor 2297Y5329
Meritor 2797C419
E-1136 RH Meritor 2297B418
Meritor 2297Z5330
Meritor 2797B418
E-2137 LH Meritor 2297A5331 14°
Meritor 2797G423
E-2136 RH Meritor 2297B5332
Meritor 2797F422
E-2139 LH Meritor 2297C5333 16°
Meritor 2797J426
E-2138 RH Meritor 2297T5350
Meritor 2797H424
SEALS
APPLICATION AND GENERAL
EUCLID NO. REPLACES COLOR INFORMATION
E-3994 Meritor 1205C2005 Blue Adjusting Bolt Seal. For 12-1/4" RD
Meritor A11705K219 Brakes and 15" Rear RD Brakes.
E-3995 Meritor 1205B2004 Blue Anchor Seal. For 12-1/4" RD Brakes
Meritor A1705K219 and 15" Rear RD Brakes.
E-5532 Meritor A1705M221 Green Adjusting Bolt and Anchor Seal for 15"
Meritor A1705W127 Front Brakes.
Meritor A21705M221 Replaces E-1447, E-1518
Meritor A31705M221
1-251
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
ANCHOR PLUNGER GUIDE AND SEAL ASSEMBLY
APPLICATION AND
EUCLID NO. REPLACES INCLUDES GENERAL INFORMATION
E-5541 Meritor 1779M195 1 Anchor Plunger Guide For All Dual-Actuated Brakes.
Meritor 3280Y8189 1 Seal Replaces: E-1118, E-1117
Meritor A3280Z8190
1-252
1
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
BRAKE SHOE CLIP ASSEMBLY
APPLICATION AND
GENERAL
EUCLID NO. REPLACES INCLUDES INFORMATION
E-2522 Meritor KIT9020 1 Shoe Clip For Drive and Trailer
1 Clip Bolt Brakes With Cast
1 Washer Spiders.
1 Nut
WEDGE GUIDE
EUCLID NO. REPLACES APPLICATION AND GENERAL INFORMATION
E-1262 Meritor 1779Q433 Fits end of Air Chamber Push Rod.
Trailmobile 19065
Navistar 268439C1
COLLET NUT
EUCLID NO. REPLACES APPLICATION AND GENERAL INFORMATION
E-1128 Meritor 1727N40 Attaches Air Chamber to Wedge Housing.
PLUNGER HOUSING
EUCLID NO. REPLACES APPLICATION AND GENERAL INFORMATION
E-2193 Meritor 3299C4189 Bolt-on Housing for Trailer Brakes with Weld-on
Spiders.
1-253
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
EUCLID "HDG" LUBRICANT
EUCLID NO. REPLACES APPLICATION & GENERAL INFORMATION
E-2015 Meritor 2297U4571 HDG is recommended for all Wedge Brakes. Apply
Meritor A1779W283 HDG generously to the Plungers and Rollers of the
Wedge Assembly and to the inside of the Seal
Assembly also. Each can is 6-1/2 oz.
1-254
1
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
E-7213A MAJOR REPAIR KIT - LEFT HAND BRAKE WITH 12° WEDGE ASSEMBLIES
EUCLID
ITEM QTY. NO. DESCRIPTION APPLICATION INFORMATION
1 2 E-2484 Adjusting Bolt For 15" RD Dual Actuated Brakes.
2 2 E-3997 12 Degree Adjuster Services one wheel.
Assembly REPLACES: Meritor KIT 9006LHB;
3 2 E-1137 12 Degree LH Plunger E-2524A, E-7213.
4 2 E-1128 Air Chamber Collet Nut
5 2 E-7211 Brake Return Spring
6 2 E-3994 Seal Assembly
7 2 E-3995 Seal Assembly
8 2 E-5541 Anchor Plunger Guide
9 2 E-1261 12 Degree Wedge
Assembly
10 2 E-2522 Shoe Clip Wedge
Assembly
11 1 E-2015 Wedge Brake Lubricant
E-7214A MAJOR REPAIR KIT - RIGHT HAND BRAKE WITH 12° WEDGE ASSEMBLIES
EUCLID
ITEM QTY. NO. DESCRIPTION APPLICATION INFORMATION
1 2 E-2484 Adjusting Bolt For 15" RD Dual Actuated Brakes.
2 2 E-3997 12 Degree Adjuster Services one wheel.
Assembly REPLACES: Meritor KIT 9006RHB;
3 2 E-1136 12 Degree RH Plunger E-2523A, E-7214
4 2 E-1128 Air Chamber Collet Nut
5 2 E-7211 Brake Return Spring
6 2 E-3994 Seal Assembly
7 2 E-3995 Seal Assembly
8 2 E-5541 Anchor Plunger Guide
9 2 E-1261 12 Degree Wedge
Assembly
10 2 E-2522 Shoe Clip Wedge
Assembly
11 1 E-2015 Wedge Brake Lubricant
1-255
MERITOR "STOPMASTER" WEDGE BRAKE PARTS
E-5544 MAJOR REPAIR KIT - LEFT HAND BRAKE WITH 14° WEDGE ASSEMBLIES
EUCLID
ITEM QTY. NO. DESCRIPTION APPLICATION INFORMATION
1 2 E-2484 Adjusting Bolt For 15" RD Dual Actuated Brakes.
2 2 E-3998 14 Degree Adjuster Services one wheel.
Assembly
3 2 E-2137 14 Degree LH Plunger
4 2 E-1128 Air Chamber Collet Nut
5 2 E-7211 Brake Return Spring
6 2 E-3994 Seal Assembly
7 2 E-3995 Seal Assembly
8 2 E-5541 Anchor Plunger Guide
9 2 E-2141 14 Degree Wedge
Assembly
10 2 E-2522 Shoe Clip Wedge
Assembly
11 1 E-2015 Wedge Brake Lubricant
E-5545 MAJOR REPAIR KIT - RIGHT HAND BRAKE WITH 14° WEDGE ASSEMBLIES
EUCLID
ITEM QTY. NO. DESCRIPTION APPLICATION INFORMATION
1 2 E-2484 Adjusting Bolt For 15" RD Dual Actuated Brakes.
2 2 E-3998 14 Degree Adjuster Services one wheel.
Assembly
3 2 E-2136 14 Degree RH Plunger
4 2 E-1128 Air Chamber Collet Nut
5 2 E-7211 Brake Return Spring
6 2 E-3994 Seal Assembly
7 2 E-3995 Seal Assembly
8 2 E-5541 Anchor Plunger Guide
9 2 E-2141 14 Degree Wedge
Assembly
10 2 E-2522 Shoe Clip Wedge
Assembly
11 1 E-2015 Wedge Brake Lubricant
1-256
1
SPECIAL BRAKE SERVICE TOOLS
UNIVERSAL BRAKE SHOE GAUGE
1-257
SPECIAL BRAKE SERVICE TOOLS
HEAVY-DUTY BRAKE DRUM GAUGE KIT
EUCLID NO. DESCRIPTION APPLICATION INFORMATION
E-9136 Heavy-Duty Brake Drum To quickly and easily measure scored, worn or
Gauge Kit heat-checked brake drums. Includes: Heavy-
Duty Brake Drum Gauge, Gauge Calibration
Tool, Euclid red hard plastic shell with padded
interior to protect the Brake Drum Gauge.
1-258
1
SPECIAL BRAKE SERVICE TOOLS
BRAKE SPIDER ALIGNMENT TOOL ADAPTER
EUCLID NO. APPLICATION INFORMATION
E-3865 Install over Front Axle Spindles to use E-3864 Brake Spider
Alignment Tool.
1-259
TECHNICAL VIDEO LIBRARY
1-260
INDEX
2-ii
CAM SPRING BRAKES AND COMPONENTS
GOLD SEAL/LIFE SEAL SEALED SPRING BRAKE COMBINATION UNITS FOR S-CAM BRAKES
EUCLID NO. REPLACES ANCHORLOK NO. MODEL NO. PUSH ROD THREAD SIZE
E-GC2024 2024GC 2024 5/8"-18
E-GC2424-LS 2424GC-LS 2424 5/8"-18
E-GC2424 2424GC 2424 5/8"-18
E-GC2430-LS 2430GC-LS 2430 5/8"-18
E-GC2430 2430GC 2430 5/8"-18
E-GC3030 3030GC 3030 5/8"-18
E-GC3036 3036GC 3036 5/8"-18
E-GC3636 3636GC 3636 5/8"-18
E-LC3030 3030LC 3030 5/8"-18
BRAKE SERVICE CHAMBERS FOR S-CAM
EUCLID NO. REPLACES ANCHORLOK NO. A MODEL NO. PUSH ROD THREAD SIZE
E-12S 12S 3-1/2" Type 12 1/2"-20
E-16S 16S 4" Type 16 1/2"-20
E-20S 20S 4-1/2" Type 20 5/8"-18
E-24S-LS 24S-LS 5" Type 24 5/8"-18
E-24S 24S 5" Type 24 5/8"-18
E-30S 30S 6" Type 30 5/8"-18
E-36S 36S 6-1/2" Type 36 5/8"-18
GOLD SEAL/LIFE SEAL SEALED SPRING BRAKE PIGGYBACK UNITS FOR S-CAM BRAKES
EUCLID NO. REPLACES ANCHORLOK NO. MODEL NO.
E-GP1624 1624GP 1624
E-GP2024 2024GP 2024
E-GP2424-LS 2424GP-LS 2424
E-GP2424 2424GP 2424
E-GP2430-LS 2430GP-LS 2430
E-GP2430 2430GP 2430
E-GP3030 3030GP 3030
E-GP3036 3036GP 3036
E-GP3636 3636GP 3636
E-LP3030 3030LP 3030
CLEVIS ASSEMBLIES AND CLEVIS PINS
EUCLID NO. DESCRIPTION CLEVIS THREAD SIZE CLEVIS PIN DIAMETER
E-11989 Clevis Pin 1/2"
E-11990 Clevis Pin 5/8"
E-8896 Clevis Assembly 1/2"- 1/2"
E-8897 Clevis Assembly 5/8"- 1/2"
E-8898 Clevis Assembly 5/8"- 5/8"
E-8899 Clevis Assembly 3/4"- 1/2"
2-1
WEDGE SPRING BRAKES AND COMPONENTS
CLAMP STYLE SPRING BRAKE COMBINATION UNITS FOR WEDGE BRAKES -- MERITOR COMBINATION TYPE
REPLACES
EUCLID NO. ANCHORLOK NO. MODEL NO. TUBE LENGTH
E-1212SB300R 1212SB300R 1212 3"
2-2
ANCHORLOK SERVICE COMPONENTS
CAGING TOOL PLUG
REPLACES
EUCLID NO. COLOR ANCHORLOK NO. APPLICATION & GENERAL INFORMATION 2
E-11991 Gold 11M112 Tethered Plug for Cam Brake Combination and
Piggyback Units.
E-9112 Blue 11M012 Untethered Plug for Wedge Brake Combination
and Piggyback Units.
2-3
EUCLID BRANDED CAM SPRING BRAKES AND COMPONENTS
SEALED SPRING BRAKE COMBINATION UNITS FOR S-CAM BRAKES
MODEL PUSH ROD PUSH ROD
EUCLID NO. NO. THREAD SIZE LENGTH NOTES
E-BC2024C 2024 5/8"-18
E-BC2424C-L 2424 5/8"-18 Long Stroke (2-1/2")
E-BC2430C-EL 2430 5/8"-18 Extra Long Stroke (3")
E-BC2430C-L 2430 5/8"-18 Long Stroke (2-1/2")
E-BC3030C-EL 3030 5/8"-18 Extra Long Stroke (3")
E-BC3030C 3030 5/8"-18
E-BC3036C 3036 5/8"-18
E-BC3636C 3636 5/8"-18
E-INT3030C-1 3030 5/8"-18 8-5/32" Intraax Low Mount
E-INT3030C-1EL 3030 5/8"-18 8-21/32" Intraax Low Mount. Extra Long Stroke (3")
E-INT3030C-2 3030 5/8"-18 12-5/16" Intraax Top Mount
E-INT3030C-2EL 3030 5/8"-18 12-13/16" Intraax Top Mount. Extra Long Stroke (3")
2-4
AIR CHAMBER BRACKETS
EUCLID NO. REPLACES APPLICATION INFORMATION
E-2096 Trailmobile 12978 Meritor "Paymaster" 4" x 6" Axle.
Dana/Spicer 2-134 2
Meritor 3299U5299
Meritor 4249B4474
Trailmobile 7-13-35
E-2518A Dana/Spicer 2-139 Spicer and Standard Forge Axles. 5/16" Thick. Also
Std. Forge 210172-001 used on any 5" Round Axle using Spring Brakes
Trailmobile 38-2518A
Dana/Spicer M10WJ144
E-3781 Dana/Spicer 2-133 Fruehauf "Pro-Par" Axle with 16-1/2" Brakes. Allows use
Trailmobile 38-3781 of 5-1/2" or 6" Slack Adjusters. Sold as Set Only.
Holland Hitch A-CF6608-1
Holland Hitch A-CF6608-2
Fruehauf ACE-006116-001
Fruehauf ACF-006608-001
Fruehauf ACF-006608-002
Fruehauf AXA-000402-001
E-631 Std. Forge 210128 Universal for Most 4-1/2" and 5" Round Axles. 5/16"
Meritor 3299A5981 Thick. Used with Spring Brakes.
Meritor 3299H996
Meritor 3299V5300
Trailmobile 38-631
Trailmobile 700-7-75
Eaton B-1208-11
2-5
AIR BRAKE HOSE ASSEMBLIES
Euclid Air Hose Assembly part numbers consist of a four digit base number followed by a dash and two additional
digits. The four digit base number designates the size of the air hose and type of end fittings. The last two digits
designate the overall length of the hose, "A" above. Air hoses are sold unpackaged as designated by the -BK after
each part number.
3/8" Air Brake Hose Assemblies 1/2" Air Brake Hose Assemblies
Overall Euclid No.
Air 1/2"-14 NPTF
Hose Euclid No. Euclid No. Euclid No. Euclid No. Fixed Euclid No.
Length 1/4"-18 NPTF 3/8"-18 NPTF 3/8"-18 NPTF 3/8"-18 NPTF 3/8"-18 NPTF 3/8"-18 NPTF
"A" 1 Fixed/1 Swivel 1 Fixed/1 Swivel 2 Swivel 1 Fixed/1 Swivel Swivel 2 Swivel
8" E-8579-08-BK E-8580-08-BK E-8581-08-BK E-8582-08-BK E-8583-08-BK E-8584-08-BK
12" E-8579-12-BK E-8580-12-BK E-8581-12-BK E-8582-12-BK E-8583-12-BK E-8584-12-BK
14" E-8579-14-BK E-8580-14-BK E-8581-14-BK E-8582-14-BK E-8583-14-BK E-8584-14-BK
16" E-8579-16-BK E-8580-16-BK E-8581-16-BK E-8582-16-BK E-8583-16-BK E-8584-16-BK
18" E-8579-18-BK E-8580-18-BK E-8581-18-BK E-8582-18-BK E-8583-18-BK E-8584-18-BK
20" E-8579-20-BK E-8580-20-BK E-8581-20-BK E-8582-20-BK E-8583-20-BK E-8584-20-BK
22" E-8579-22-BK E-8580-22-BK E-8581-22-BK E-8582-22-BK E-8583-22-BK E-8584-22-BK
24" E-8579-24-BK E-8580-24-BK E-8581-24-BK E-8582-24-BK E-8583-24-BK E-8584-24-BK
26" E-8579-26-BK E-8580-26-BK E-8581-26-BK E-8582-26-BK E-8583-26-BK E-8584-26-BK
28" E-8579-28-BK E-8580-28-BK E-8581-28-BK E-8582-28-BK E-8583-28-BK E-8584-28-BK
30" E-8579-30-BK E-8580-30-BK E-8581-30-BK E-8582-30-BK E-8583-30-BK E-8584-30-BK
32" E-8579-32-BK E-8580-32-BK E-8581-32-BK E-8582-32-BK E-8583-32-BK E-8584-32-BK
34" E-8579-34-BK E-8580-34-BK E-8581-34-BK E-8582-34-BK E-8583-34-BK E-8584-34-BK
36" E-8579-36-BK E-8580-36-BK E-8581-36-BK E-8582-36-BK E-8583-36-BK E-8584-36-BK
38" E-8579-38-BK E-8580-38-BK E-8581-38-BK E-8582-38-BK E-8583-38-BK E-8584-38-BK
40" E-8579-40-BK E-8580-40-BK E-8581-40-BK E-8582-40-BK E-8583-40-BK E-8584-40-BK
42" E-8579-42-BK E-8580-42-BK E-8581-42-BK E-8582-42-BK E-8583-42-BK E-8584-42-BK
44" E-8579-44-BK E-8580-44-BK E-8581-44-BK E-8582-44-BK E-8583-44-BK E-8584-44-BK
46" E-8579-46-BK E-8580-46-BK E-8581-46-BK E-8582-46-BK E-8583-46-BK E-8584-46-BK
48" E-8579-48-BK E-8580-48-BK E-8581-48-BK E-8582-48-BK E-8583-48-BK E-8584-48-BK
50" E-8579-50-BK E-8580-50-BK E-8581-50-BK E-8582-50-BK E-8583-50-BK E-8584-50-BK
52" E-8579-52-BK E-8580-52-BK E-8581-52-BK E-8582-52-BK E-8583-52-BK E-8584-52-BK
54" E-8579-54-BK E-8580-54-BK E-8581-54-BK E-8582-54-BK E-8583-54-BK E-8584-54-BK
56" E-8579-56-BK E-8580-56-BK E-8581-56-BK E-8582-56-BK E-8583-56-BK E-8584-56-BK
60" E-8579-60-BK E-8580-60-BK E-8581-60-BK E-8582-60-BK E-8583-60-BK E-8584-60-BK
62" E-8579-62-BK E-8580-62-BK E-8581-62-BK E-8582-62-BK E-8583-62-BK E-8584-62-BK
66" E-8579-66-BK E-8580-66-BK E-8581-66-BK E-8582-66-BK E-8583-66-BK E-8584-66-BK
68" E-8579-68-BK E-8580-68-BK E-8581-68-BK E-8582-68-BK E-8583-68-BK E-8584-68-BK
72" E-8579-72-BK E-8580-72-BK E-8581-72-BK E-8582-72-BK E-8583-72-BK E-8584-72-BK
84" E-8579-84-BK E-8580-84-BK E-8581-84-BK E-8582-84-BK E-8583-84-BK E-8584-84-BK
2-6
AIR BRAKE HOSE AND FITTINGS
BULK AIR BRAKE HOSE
EUCLID NO. I.D. O.D. PACKAGE
E-8577 3/8" 3/4" 50 Ft. per box 2
E-8577-BK 3/8" 3/4" 250 Ft. per reel
2-7
AIR BRAKE FITTINGS
EUCLID NO. DESCRIPTION FITS HOSE I.D. PIPE THREAD FITTING I.D. HEX SIZE
E-8587 Insert 3/8" 1/2"-14 9/32" 1"
E-8585 3/8" 1/4"-18 9/32" 1"
E-8586 3/8" 3/8"-18 9/32" 1"
E-8589 1/2" 1/2"-14 25/64" 1-1/8"
E-8588 1/2" 3/8"-18 25/64" 1-1/8"
LENGTH
OVERALL ADDED TO
EUCLID NO. DESCRIPTION FITS HOSE I.D. PIPE THREAD LENGTH HOSE
E-8592 Connector 3/8" 1/2"-14 2-29/64" 29/32"
E-8590 3/8" 1/4"-18 2-17/64" 23/32"
E-8591 3/8" 3/8"-18 2-23/64" 51/64"
E-8594 1/2" 1/2"-14 2-29/64" 29/32"
E-8593 1/2" 3/8"-18 2-23/64" 51/64"
E-8597 Connector with Spring Guard 3/8" 1/2"-14 4-7/8" 29/32"
E-8595 3/8" 1/4"-18 4-3/4" 23/32"
E-8596 3/8" 3/8"-18 4-3/4" 51/64"
E-8599 1/2" 1/2"-14 4-7/8" 29/32"
E-8598 1/2" 3/8"-18 4-3/4" 51/64"
EUCLID NO. DESCRIPTION FITS HOSE I.D. INSERT HEX SIZE OVERALL LENGTH
E-8600 Hose Union 3/8" 1" 3-1/4"
E-8603 1/2"
E-8605 1/2"
E-8609 1/2"
E-8607 1/2"
EUCLID NO. DESCRIPTION FITS HOSE I.D. PIPE THREAD OVERALL LENGTH
E-8610 Adapter 3/8" 1/4"-18 1-3/16"
E-8611 3/8" 3/8"-18 1-3/16"
E-8613 1/2" 1/2"-14 1-3/16"
E-8612 1/2" 3/8"-18 1-3/16"
2-8
AIR HOSE ASSEMBLY WALL DISPLAY RACKS
Euclid Part No. E-8703
FREE
AIR HOSE ASSEMBLY WALL DISPLAY RACKS!
Purchase An Air Hose Assembly Display Assortment and get a FREE E-8703 Wall Display Rack!
Includes One FREE E-8703 Wall Display Rack Plus: Includes One FREE E-8703 Wall Display Rack Plus:
3/8" I.D. Hose 1/2" I.D. Hose 3/8" I.D. Hose 1/2" I.D. Hose
1/4"-18NPTF 3/8"-18NPTF 3/8"-18NPTF 3/8"-18 NPTF
1 Fixed/1 Swivel 1 Fixed/1 Swivel 1 Fixed/1 Swivel 1 Fixed/1 Swivel
2-9
EUCLID POLYURETHANE GLADHAND SEALS
E-8658-R-BK Red (emergency) Gladhand Seal Bulk packed, 100 per box
2-10
COILED AIR HOSE
AIR RESERVOIRS
PORT SIZE
MOUNTING HOLES CAPACITY APPLICATION & GENERAL
EUCLID NO. DIAMETER CENTER-TO-CENTER (CU.IN.) SIDE BOTTOM ENDS (2) INFORMATION
E-10732 8" 32" 1425 3/4" 1/4" 3/8" Meets SAE J10 specifications. Rated
at 150 psi working pressure.
E-10733 12" 29-1/2" 2850 3/4" 1/4" 1/2"
E-10734 9-1/2" 27-1/2" 1488 3/4" 1/4" 3/8"
E-10735 8" 32" 1425 3/4" (2) 1/4" 3/8"
E-10736 9-1/2" 27-1/2" 1488 1/2" (2) 1/4" 3/8"
2-11
NOW FROM EUCLID
New Air System Valves
Complete Line of Genuine Sealco
New and Remanufactured Valves
Combined with Remanufactured Air System and Foundation Brake Products,
Now more than ever, when you think Air Brake, think Euclid.
OEM DESIGNATIONS
OEM PREFIX
Bendix .......... BN
Cummins ..... CU
Fuller ............ FU
Midland ........ MD
Sealco .......... SL
Sloan ............ SN
2-12
AIR BRAKE GOVERNORS AND LINE FILTERS
PRESSURE SETTINGS
APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES CUT-IN CUT-OUT PORT SIZE INFORMATION
E-BN275491N New Bendix 275491 100 psi 120 psi 1/8" Ports Standard Version. Pressure setting range
is adjustable. Governor - Signals the
unloading mechanism on the compressor
E-BN275491X Reman Bendix 275491X when to build up air to the reservoir and
when to halt air build up. Usually between
100 and 120 psi. Includes plugs for
unused ports and gasket.
E-BN284358N New Bendix 284358 105 psi 125 psi High Temperature Version. Pressure
setting range is adjustable.
E-BN284358X Reman Bendix 284358X
PRESSURE SETTINGS
APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES CUT-IN CUT-OUT PORT SIZE INFORMATION
E-MDKN18511X Reman Midland KN18511X 100 psi 120 psi (1) 1/16" Governor - Signals the unloading
Unloaded mechanism on the compressor when to
(1) 1/8" build up air to the reservior and when to
Unloaded halt air build up. Usually between 100 and
120 psi. Includes plugs for unused ports
and gasket.
2-13
AIR BRAKE GOVERNORS AND LINE FILTERS
PRESSURE SETTINGS
APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES CUT-IN CUT-OUT PORT SIZE INFORMATION
E-MDKN18530X Reman Midland KN18530X 100 psi 120 psi 1/8" Ports Governor - Signals the unloading
mechanism on the compressor when to
build up air to the reservoir and when to
halt air build up. Usually between 100 and
120 psi.
E-MDKN18531X Reman Midland KN18531X 1/4" Ports Governor - Signals the unloading
mechanism on the compressor when to
build up air to the reservoir and when to
halt air build up. Usually between 100 and
120 psi. Includes plugs for unused ports
and gasket.
2-14
AIR COMPRESSOR DRIVE COUPLINGS
EUCLID
NO. REPLACES O.D. I.D. THICK LGTH. MATERIAL DESCRIPTION
E-1042 GMC 2136946 2-13/16" 1-7/8" 2-5/8" Steel Drive Coupling. No 2
Bushing
E-2277 Detroit 5144866 3-7/16" 7/8" 1-1/8" Fiber Drive Hub for Bendix and
GMC 791058 Wagner
E-1039 GMC 2136945 1-1/4" Drive Hub for Bendix and
GMC 2193563 Wagner. Drilled and
Trailmobile 38-1039 Tapped for Puller
E-1046 Mack 320GB11A 3-9/16" 1" 1-1/2" Drive Hub for Mack Trucks
Trailmobile 38-1046
Midland SN3072BV
AIR COMPRESSORS
2-15
AIR COMPRESSORS
2-16
AIR COMPRESSORS
2-17
AIR COMPRESSORS
2-18
AIR COMPRESSORS
2-20
AIR COMPRESSORS
2-21
AIR COMPRESSORS
2-22
AIR COMPRESSORS
2-23
AIR COMPRESSORS
15 Has crankcase cover with 1/2" PT oil drain. 2 Base oil option.
2-24
AIR COMPRESSORS
16 Has 2°-30° tilt and threaded mounting hole. 17 Tapered shaft - 2-1/2° tilt.
18 Splined shaft - 22 tooth.
2-25
AIR COMPRESSORS
2-26
AIR COMPRESSORS
2-27
AIR COMPRESSORS
2-28
AIR COMPRESSORS
2-29
AIR COMPRESSORS
EUCLID NO. REPLACES UNLOADER KIT MOUNTING GASKET KIT CORE GROUP CORE NO.
E-CU3049186X Cummins 3005840 E-CU3559511 E-153115 CU682 XC1976
Cummins 3010879
Cummins 3015034
Cummins 3015630
Cummins 3016082
Cummins 3018527
Cummins 3018530
Cummins 3018531
Cummins 3018534
Cummins 3018541
Cummins 3018542
Cummins 3018543
Cummins 3018544
Cummins 3018545
Cummins 3018551
Cummins 3018553
Cummins 3018555
Cummins 3024365
Cummins 3046440
Cummins 3049186
2-30
AIR COMPRESSORS
2-31
AIR COMPRESSORS
2-32
AIR COMPRESSORS
2-33
AIR COMPRESSORS
2-34
AIR COMPRESSORS
2-35
AIR COMPRESSORS
2-36
AIR COMPRESSORS
25 Extended crankshaft.
2-37
AIR COMPRESSORS
2-38
AIR COMPRESSORS
2-39
AIR COMPRESSORS
2-40
AIR DRYERS
2-41
AIR DRYERS
2-42
AIR DRYERS
AIR DRYERS
2-43
CHECK VALVES
APPLICATION AND
ORIFICE GENERAL
EUCLID NO. NEW/REMAN REPLACES LENGTH PORT SIZE DIAMETER SIZE INFORMATION
E-SL110183 New Sealco 110183 2-3/8" 1/4" 1-1/4" .21
E-SL220100 Sealco 220100
E-SL220000 Sealco 220000 3-3/8" 3/4" 1-1/2"
PORT SPECIFICATIONS
APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES A B INFORMATION
E-SL22001/2 New Sealco 22001/2 1/2" PT 1/2" PT Dimension Size 2-3/8" x 1-1/4"
E-SL22001/4 Sealco 22001/4 1/4" PT 1/4" PT
E-SL22003/4 Sealco 22003/4 3/4" PT 3/4" PT
PORT SPECIFICATIONS
APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES FEMALE MALE INFORMATION
E-BN227870N New Bendix 227870 3/8" 3/8"
E-BN227871N Bendix 227871 1/2" 1/2"
2-44
CHECK VALVES
PORT SPECIFICATIONS
EUCLID NO. NEW/REMAN REPLACES FEMALE MALE CORE NO. APPLICATION & GENERAL INFORMATION
E-BN228520X Reman Bendix 228520X (1) 1/2" (1) 3/8" XC1069 DS-1 Check Valve - Performs the function of both
a stop light switch and a double check valve. It
E-BN228050X Bendix 228050X (2) 1/4" accepts a signal from two sources and delivers it to
E-BN229493X Bendix 229493X (3) 1/4" a common outlet. It is used in pre FMVSS-121
single circuit systems.Normally used with a trailer
E-BN228165X Bendix 228165X (1) 3/8" (2) 1/4" XC1043 control and foot valve where delivery pressure
from either source activates the stop lamps and
controls the brakes. All have 3/8" Terminal Thread.
EUCLID NO. NEW/REMAN REPLACES PORT SIZE APPLICATION AND GENERAL INFORMATION
E-BN278614X Reman Bendix 278614X (3) 3/8" DC-4 Double Check Valve - Accepts a signal from
two sources and delivers it to a common outlet,
E-BN278615X Bendix 278615X (3) 1/4" Normally used with a trailer control and foot valve
where delivery pressure from either source, but not
both controls the brakes.
2-45
CHECK VALVES
EUCLID NO. NEW/REMAN REPLACES REPAIR KIT NO. APPLICATION & GENERAL INFORMATION
E-SL3200-1/4 New Sealco 3200-1/4
E-SL3200 Sealco 3200 E-SL32-5
E-SL320100 Sealco 320100
E-SL5200 Sealco 5200 E-SL52-5
E-SL7200 Sealco 7200 E-SL72-5
2-46
CHECK VALVES
COMBINATION VALVES
2 1/4" Threaded delivery port 3 Remote mount - 1/4" Female thread in shaft
4 1/8" Threaded delivery port - non automatic.
2-47
AIR BRAKE CONTROL VALVES
2-48
AIR BRAKE CONTROL VALVES
AUTO BUTTON
RELEASE SHAFT APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES PRESSURE DIAMETER INFORMATION
E-BN288241N New Bendix 288241 40 psi 5/16" Button and mounting nut not included.
E-BN288241X Reman Bendix 288241X 1/4" threaded exhaust port.
E-BN288239N New Bendix 288239 3/8" Button and mounting nut not included.
E-BN288239X Reman Bendix 288239X
E-BN288240X Bendix 288240X 1/2" Remote mount - 1/4" female thread in
E-BN288242X Bendix 288242X shaft.
2-49
AIR BRAKE CONTROL VALVES
1 Remote Mount
2-50
AIR BRAKE CONTROL VALVES
EUCLID NO. NEW/REMAN REPLACES DELIVERY PORT APPLICATION & GENERAL INFORMATION
E-SN401037X Reman Sloan 401037X 1/4" Buttons and mounting hardware are not included.
2-51
AIR BRAKE CONTROL VALVES
2-52
AIR BRAKE CONTROL VALVES
2-53
AIR BRAKE CONTROL VALVES
2-54
AIR BRAKE CONTROL VALVES
E-BN282381X Reman Bendix 282381X Lock position right. Buttons and mounting hardware are not
included.
2-55
AIR BRAKE CONTROL VALVES
2-56
AIR BRAKE CONTROL VALVES
EUCLID NO. NEW/REMAN REPLACES PORT SIZE EXHAUST APPLICATION & GENERAL INFORMATION
E-SN401029 New Sloan 401029 1/4" (All) Open The valves 2-way check valve allows either primary or
E-SN401084 New Sloan 401084 1/4" (All) Barbed Tube secondary air to operate spring brakes.
2-57
AIR BRAKE DRAIN VALVES
SPECIFICATIONS
CABLE APPLICATION AND GENERAL
EUCLID NO. NEW/REMAN REPLACES STYLE LENGTH INFORMATION
E-SN401045 New Sloan 401045 A 48"
E-SN401046 Sloan 401046 60"
E-SN401047 Sloan 401047 Cable not crimped.
E-SN401056 Sloan 401056 36"
E-SN401075 Sloan 401075 C
E-SN401095 Sloan 401095 B 48" Low profile design to prevent breakage.
2-58
AIR BRAKE FOOT VALVES
EUCLID NO. NEW/REMAN REPLACES DELIVERY PORTS APPLICATION AND GENERAL INFORMATION
E-BN279950X Reman Bendix 279950X (2) 1/4" (1) 1/2" (1) 3/8" Furnished less treadle and mounting brackets. The E-5
is firewall mounted and has a suspended pedal. It is
mounted in the cab of the truck.
2-59
AIR BRAKE FOOT VALVES
EUCLID NO. NEW/REMAN REPLACES DELIVERY PORTS APPLICATION AND GENERAL INFORMATION
E-MDKN22100X Reman Midland KN22100X (4) 1/2" Furnished less treadle and mounting brackets.
2-60
AIR BRAKE FOOT VALVES
DELIVERY SUPPLY
NEW/ MTG CORE
EUCLID NO. REMAN REPLACES LEFT RIGHT LEFT RIGHT STUDS STUD SIZE GROUP CORE NO.
E-BN101818X Reman Bendix 101818X 3/8" PT 3/8" PT 1/4" PT 1/4" PT None BN207 XC1032
E-BN284760X 2 Bendix 284760X BN208 XC1110
E-BN286773X Bendix 286773X 1/4" PT 1/4" PT 1/4" PT Yes 1-1/2" x 3/8" BN207 XC1118
E-BN286775X Bendix 286775X 3/4" x 3/8"
E-BN287411X Bendix 287411X 3/8" PT 3/8" PT None
E-BN287564X 3 Bendix 287564X 1/4" PT 1/4" PT Yes 15/16" x 3/8"
E-BN288383X Bendix 288383X None
2 O-ring sealed flange ports. O-rings are packaged with the valve. 3 The exhaust port contains a diaphragm.
2-61
AIR BRAKE FOOT VALVES
2-62
AIR BRAKE FOOT VALVES
2-63
AIR BRAKE FOOT VALVES
2-64
AIR BRAKE HAND CONTROL VALVES
2-65
AIR BRAKE INVERSION VALVES
SPECIFICATIONS
EUCLID NO. NEW/REMAN REPLACES A B APPLICATION & GENERAL INFORMATION
E-BN101450X Reman Bendix 101450X 25 psi 40 psi Inversion Valves - An inverting, on/off, two way
valve. Normally the valve is open, and it is closed by
E-BN280758X Bendix 280758X 45 psi 60 psi air pressure from another source. Used in parking
brake and sequencing applications. With common
E-BN281318X Bendix 281318X 35 psi 70 psi control and supply pressure inlet opens at"A" psi
descending pressure and the exhaust opens at "B"
E-BN288586X Bendix 288586X 75 psi 90 psi psi ascending pressure.
2-66
AIR BRAKE PROTECTION VALVES
CRACK
EUCLID NO. NEW/REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN277226X Reman Bendix 277226X 60 psi Pressure Protection Valves - Protects the brake system from
accessory failure. Used to isolate and protect one reservoir supply
from another by closing at its pressure setting. Also used in rapid
E-BN277227X Reman Bendix 277227X 75 psi buildup systems where it delays the filling of auxiliaryreservoirs until
a preset pressuer is reached in the primary reservoir.
CRACK
EUCLID NO. NEW/REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103976X 1 Reman Bendix 103976X 45 psi Pressure Protection Valves - Protects the brake system from
accessory failure. Used to isolate and protect one reservoir supply
from another by closing at its pressure setting. Also used in rapid
E-BN288323X Reman Bendix 288323X 70 psi buildup systems where it delays the filling of auxiliaryreservoirs until
a preset pressure is reached in the primary reservoir.
1 This part number is designed for use with aftercoolers and air
dryers where the air compressor turbocharger inlet is turbocharged.
2-67
AIR BRAKE PROTECTION VALVES
CRACK PRESSURE
EUCLID NO. NEW/REMAN REPLACES OPEN CLOSE APPLICATION AND GENERAL INFORMATION
E-MDKN31000X Reman Midland KN31000X 65 psi 45 psi Pressure Protection Valves - Protects the brake system from
accessory failure. Used to isolate and protect one reservoir supply
from another by closing at its pressure setting. Also used in rapid
E-MDKN31010X Reman Midland KN31010X 95 psi 45 psi buildup systems where it delays the filling of auxiliaryreservoirs until
a preset pressure is reached in the primary reservoir.
SPECIFICATIONS
EUCLID NO. NEW/REMAN REPLACES STYLE INLET OUTLET OPEN CLOSE QUICK FIX REPAIR KIT
E-SL140370 New Sealco 140370 A 1/4" 1/4" 70 psi 60 psi E-SL140271
E-SL140380 Sealco 140380 80 psi 70 psi E-SL140281
E-SL140200 Sealco 140200 3/8" 3/8" 70 psi 60 psi E-SL140201
E-SL140270 Sealco 140270 E-SL140271
E-SL110257 Sealco 110257 B 75 psi 70 psi
E-SL110258 Sealco 110258
E-SL140390 Sealco 140390 A 80 psi
E-SL140280 Sealco 140280 E-SL140281
E-SL140290 Sealco 140290 90 psi 80 psi
2-68
AIR BRAKE PROTECTION VALVES
2-69
AIR BRAKE PROTECTION VALVES
NOMINAL
NEW/ DELIVERY CORE APPLICATION AND GENERAL
EUCLID NO. REMAN REPLACES PRESSURE TYPE GROUP CORE NO. INFORMATION
E-MDKN31060X Reman Midland KN31060X 60 psi 1 MD393 XC1179 For use in auxiliary systems only - not used
in the brake system. Pressure settings are
based on 100 psi supply. Pressure setting
on this valve is adjustable.
E-MDKN31080X Midland KN31080X 2 MD395 XC1180 Pressure setting on this valve is adjustable.
E-MDKN31070X Midland KN31070X 10-125 psi 3 MD396 XC1201
SPECIFICATIONS
APPLICATION AND
CRACK GENERAL
EUCLID NO. NEW/REMAN REPLACES DELIVERY SUPPLY PRESSURE INFORMATION
E-10790 New 3/8" 1/2" 1 psi New plastic composite
E-10791 3/8" material.
E-BN229813X Reman Bendix 229813X 1/4"
E-BN229844X Bendix 229844X 1/2"
E-BN229859N New Bendix 229859 3/8" (2) 3/8"
E-BN229859X Reman Bendix 229859X
E-BN229860N New Bendix 229860 1/2"
E-BN229860X Reman Bendix 229860X
E-BN281024X Bendix 281024X 1/4" 1/4"
E-BN288251X 1 Bendix 288251X 3/8" 3/8"
2-70
AIR BRAKE QUICK RELEASE VALVES
SPECIFICATIONS
APPLICATION AND
CRACK GENERAL
EUCLID NO. NEW/REMAN REPLACES DELIVERY SUPPLY PRESSURE INFORMATION
E-MDKN32000X Reman Midland KN32000X 3/8" 1/4" Low Pressure
E-MDKN32010X Midland KN32010X 1/2" 3/8" Differential
E-MDKN32020X Midland KN32020X 3/8" 1/4" High Pressure
Differential
2-71
AIR BRAKE QUICK RELEASE VALVES
SPECIFICATIONS
CRACK APPLICATION AND GENERAL
EUCLID NO. NEW/REMAN REPLACES DELIVERY SUPPLY PRESSURE INFORMATION
E-BN289182X Reman Bendix 289182X 1/4" 1/4" 1 psi
SPECIFICATIONS
CRACK APPLICATION AND GENERAL
EUCLID NO. NEW/REMAN REPLACES DELIVERY SUPPLY PRESSURE INFORMATION
E-MDKN32040X Reman Midland KN32040X 1/4" 1/4" 1 psi
SPECIFICATIONS
APPLICATION AND
CRACK GENERAL
EUCLID NO. NEW/REMAN REPLACES DELIVERY SUPPLY PRESSURE INFORMATION
E-BN229505X Reman Bendix 229505X 3/8" 3/8"
E-BN229507X Bendix 229507X 1/4" 1/2"
E-BN229509X Bendix 229509X 3/8"
2-72
AIR BRAKE QUICK RELEASE VALVES
NOMINAL NOMINAL
HOLDOFF EQUALIZING APPLICATION AND GENERAL
EUCLID NO. NEW/REMAN REPLACES PRESSURE PRESSURE INFORMATION
E-BN104598X Reman Bendix 104598X 4 psi 50 psi
2-73
AIR BRAKE RATIO VALVES
2-74
AIR BRAKE RELAY VALVES
2-75
AIR BRAKE RELAY VALVES
2-76
AIR BRAKE RELAY VALVES
2-77
AIR BRAKE RELAY VALVES
EUCLID NO. NEW/REMAN REPLACES CRACK PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103010N New Bendix 103010 4.0 psi (2) 1/2" PT delivery ports located on the side of the valve.
(1) 1/4" PT service port.
E-BN103010X Reman Bendix 103010X (2) 1/4" PT supply ports.
(1) 1/8" PT balance port located under the exhaust cover.
E-BN104345X Bendix 104345X 5.0 psi
The balance port provides an anti-compounding feature that prevents
E-BN103294X Bendix 103294X 5.5 psi simultaneous application of the service and parking sides of the spring
brake and allows the valve to control spring brakes and service brakes.
E-BN103835X Bendix 103835X 7.5 psi
Universal mounting bracket E-153200 supplies with all R-14 relay
E-BN103139X Bendix 103139X 10.0 psi valves.
2-78
AIR BRAKE RELAY VALVES
SUPPLY PORT
EUCLID NO. NEW/REMAN REPLACES SIZE CRACK PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103009N New Bendix 103009 3/4" 4.0 psi The horizontal mount R-12H has 2 supply ports
E-BN103009X Reman Bendix 103009X 3/4" located on the side of the valve. (1) 1/4" PT service
E-BN065125X Bendix 065125X 1/2" 5.5 psi port. (2) 1/2" PT delivery ports. Universal mounting
E-BN104165X Bendix 104165X 3/4" 7.5 psi bracket E-153200 supplied with all R-12 relay
E-BN103195X Bendix 103195X 3/4" 10.0 psi valves.
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103028N New Bendix 103028 4.0 psi (2) 1/2" PT delivery ports located on the side of the valve.
(1) 1/4" PT service port.
E-BN103028X Reman Bendix 103028X (2) 1/2" PT supply port.
(1) 1/8" PT balance port located under the exhaust cover.
E-BN106313X Bendix 106313X 5.5 psi
The balance port provides an anti-compounding feature that prevents
E-BN103833X Bendix 103833X 7.5 psi simultaneous application of the service and parking sides of the spring
brake and allows the valve to control spring brakes and service brakes.
Universal mounting bracket E-153200 supplies with all R-14 relay valves.
2-79
AIR BRAKE RELAY VALVES
2-80
AIR BRAKE RELAY VALVES
1 Has a 7 PSI pressure differential and only (1) 1/2" PT supply port.
2-81
AIR BRAKE RELAY VALVES
2-82
AIR BRAKE RELAY VALVES
EUCLID NO. NEW/REMAN REPLACES CRACK PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103028N New Bendix 103028 4.0 psi (2) 1/2" PT delivery ports located on the side of the valve.
(1) 1/4" PT service port.
E-BN103028X Reman Bendix 103028X (2) 1/2" PT supply port.
(1) 1/8" PT balance port located under the exhaust cover.
E-BN106313X Bendix 106313X 5.5 psi
The balance port provides an anti-compounding feature that prevents
E-BN103833X Bendix 103833X 7.5 psi simultaneous application of the service and parking sides of the spring
brake and allows the valve to control spring brakes and service
brakes.
2-83
AIR BRAKE RELAY VALVES
SPECIFICATIONS
SUPPLY SUPPLY CRACK APPLICATION AND
EUCLID NO. NEW/REMAN REPLACES DELIVERY "A" "B" PRESSURE GENERAL INFORMATION
E-MDKN28500N New Midland KN28500 3/8" (2) 3/8" 3/8" 5.5 psi
E-MDKN28500X Reman Midland KN28500X
E-MDKN28510N New Midland KN28510 1/2"
E-MDKN28510X Reman Midland KN28510X
E-MDKN28520N New Midland KN28520 1/2" (2) 1/2"
E-MDKN28520X Reman Midland KN58520X
1 Has an auxiliary supply port on the bottom that can be used for
other accessories requiring reservoir air.
2-84
AIR BRAKE RELAY VALVES
2 Has mounting holes for frame mount otherwise designed for tank
mount.
2-85
AIR BRAKE RELAY VALVES
2-86
AIR BRAKE RELAY VALVES
1 Fruehauf-Propar application.
2-87
AIR BRAKE RELAY VALVES
2-88
AIR BRAKE RELAY VALVES
1 With ratio.
2-89
AIR BRAKE RELAY VALVES
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SL110360 New Sealco 110360 1.5 psi Nipple mount design. Nipple not included. Use E-SL6002 or E-SL6003.
LOV-2 = Low opening valve for single axle applications.
E-SL110365 Sealco 110365 Frame mount design. Includes mounting bracket. LOV-2 = Low opening
valve for single axle applications.
E-SL110410 Sealco 110410 4.0 psi Nipple mount design. Nipple not included, use E-SL6002 or E-SL6003.
E-SL110412 Sealco 110412 Frame mount design. Supplied with bracket Kit E-SL110395
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SL110380 New Sealco 110380 1.5 psi (1 swivel) 3/8" PT control port. (1) 3/4" PT supply port. (4) 3/8" PT
delivery ports. LOV-4 = Low opening valve for tandem axle applications.
E-SL110380X Reman Sealco 110380X Nipple mount design. Nipple not included, use E-SL6003 or E-SL6006.
E-SL110385 Sealco 110385 (1 swivel) 3/8" PT control port. (1) 3/4" PT supply port. (4) 3/8" PT
delivery ports. LOV-4 = Low opening valve for tandem axle applications.
Nipple mount design. Nipple not included, use E-SL6003 or E-SL6006.
E-SL110395 frame bracket included
E-SL110415 New Sealco 110415 4.0 psi (1 swivel) 3/8" PT control port. (1) 3/4" PT supply port. (4) 3/8" PT
delivery ports. LOV-4 = Low opening valve for tandem axle applications.
E-SL110415X Reman Sealco 110415X Nipple mount design. Nipple not included, use E-SL6003 or E-SL6006.
2-90
AIR BRAKE RELAY VALVES
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SL110197 New Sealco 110197 4.0 psi Nipple mount design. Nipple not included, use E-SL6002 or E-SL6003.
E-SL110197X Reman Sealco 110197X
E-SL110198 New Sealco 110198 For trailer applications only.
E-SL110199 Sealco 110199 4.0 psi
E-SL110199X Reman Sealco 110199X
E-SL110275 New Sealco 110275
E-SL110275X Reman Sealco 110275X
E-SL110507 New Sealco 110507 6.0 psi
E-SL110507X Reman Sealco 110507X
2-91
AIR BRAKE CONTROL LINE VALVES
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SL110370X Reman Sealco 110370X 4.5 psi (1) 1/2" PT reservoir port.
LOV-CF = Low opening valve. Designed to speed up the control line
signal to rear trailers.
E-SL110375X 1 Sealco 110375X 1.5 psi (1) 1/2" PT reservoir port.
LOV-CF = Low opening valve. Designed to speed up the control line
signal to rear trailers. Frame mount.
E-SL110570 New Sealco 110570 (1) 1/2" PT reservoir port.
LOV-CF = Low opening valve. Designed to speed up the control line
signal to rear trailers. Includes mounting bracket.
E-SL110571 Sealco 110571 0.0 psi
E-SL110606 Sealco 110606
E-SL110690 Sealco 110690 (1) 1/2" PT reservoir port.
E-SL110690X Reman Sealco 110690X LOV-CF = Low opening valve. Designed to speed up the control line
signal to rear trailers.
1 Frame mount.
2-92
AIR BRAKE EMERGENCY VALVES
2-93
AIR BRAKE EMERGENCY VALVES
RELEASE
EUCLID NO. NEW/REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-BN103081X Reman Bendix 103081X 95 psi (1) 1/4" PT control port. (1) 1/4" PT balance port. (2) 3/8" PT
delivery port. (1) 3/8" PT supply port.
2-94
AIR BRAKE EMERGENCY VALVE
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SLA1000S New Sealco A1000S 1.5 psi Nipple mount design. Nipple not included. Use E-SL6002 or E-SL6003. For
E-SLA1000SX Reman Sealco A1000SX quick fix service use E-SL1000-5A cartridge.
NEW/ CRACK
EUCLID NO. REMAN REPLACES PRESSURE APPLICATION AND GENERAL INFORMATION
E-SL1000-5A New Sealco 1000-5A 1.5 psi For use with the E-SLA1000X or E-SLA1000S Relay Emergency Valve.
E-SL1000-5AX Reman Sealco 1000-5AX
2-95
AIR BRAKE EMERGENCY VALVES
SPECIFICATIONS
APPLICATION AND
CRACK EMERGENCY CONTROL SUPPLY RATIO GENERAL
EUCLID NO. NEW/REMAN REPLACES PRESSURE SUPPLY PORTS OUT FEATURE INFORMATION
E-SL110200 New Sealco 110200 4.5 psi 1/4" 1/4" (2) 3/4" Yes Valve has ratio feature
E-SL110200X Reman Sealco 110200X which is used during
E-SL110475 New Sealco 110475 3/8" 3/8" (2) 3/8" No panic stop applications.
E-SL110475X Reman Sealco 110475X Nipple mount design
E-SL110460 New Sealco 110460 3/4" style - use E-SL6003 or
E-SL110460X Reman Sealco 110460X E-SL6006.
E-SL110470 New Sealco 110470
E-SL110205 Sealco 110205 Yes
E-SL110205X Reman Sealco 110205X
E-SL110459 New Sealco 110459 8.5 3/8" No
E-SL110459X Reman Sealco 110459X
2-96
AIR BRAKE SPRING BRAKE VALVES
2-97
AIR BRAKE SPRING BRAKE VALVES
2-98
AIR BRAKE SPRING BRAKE VALVES
2-99
AIR BRAKE SPRING BRAKE VALVES
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
2-100
AIR BRAKE SPRING BRAKE VALVES
2-101
AIR BRAKE SPRING BRAKE VALVES
2-102
AIR BRAKE SPRING BRAKE VALVES
EUCLID NO. NEW/REMAN REPLACES RESERVOIR PORT APPLICATION AND GENERAL INFORMATION
E-BN065437X 1 Reman Bendix 065437X 3/4" Male PT (1) 1/4" PT service/spring brake reservoir port.
E-BN065438X Bendix 065438X (1) 1/4" PT service port.
E-BN065439X 1 Bendix 065439X 1/2" Male PT (1) 1/4" PT trailer service port.
(1) 1/4" PT trailer supply port.
(4) 3/8" PT delivery ports.
1 With anti-compounding.
2-103
AIR BRAKE SPRING BRAKE VALVES, SWITCHES AND INDICATORS
INCLUDES
SPRING RESERVOIR
NEW/ PRIORITY 4 PORT BRAKE CTRL MOUNTING
EUCLID NO. REMAN REPLACES SYSTEM RELAY VALVE TEE APPLICATION & GENERAL INFORMATION
E-SL110542 New Sealco 110542 Spring E-SL110415 E-SL110500 1/2" For use on tandem axle trailer with 2 tanks and
E-SL110544 Sealco 110544 Brake 3/4" 1 valve (spring brake priority). Repair
E-SL110515 and E-SL110520 Plug Units
E-SL110742 Sealco 110742 Service E-SL110700 1/2" For use on tandem axle trailer with 1 tank and
E-SL110744 Sealco 110744 Reservoir 3/4" 1 valve (service reservoir priority). Repair
E-SL110705 and E-SL1105115 Plug Units
2-104
AIR BRAKE SWITCHES AND INDICATORS
2-105
AIR BRAKE TRACTOR PROTECTION VALVES
2-106
AIR BRAKE TRACTOR PROTECTION VALVES
2-107
AIR BRAKE TRACTOR PROTECTION VALVES
2-108
AIR BRAKE TRACTOR PROTECTION VALVES
2-109
AIR BRAKE MISCELLANEOUS VALVES
2-110
MOUNTING HARDWARE
E-SL110238 E-SL110285
E-SL110314
E-SL110158
E-SL110395
KNOBS
No. E-SL13 No. E-SL13G No. E-SL13R No. E-SL13S No. E-SL13Y
No. E-SL8022 No. E-SL821 No. E-SL8098 No. E-SL8116 No. E-SL819
2-111
SOLENOID VALVES
SPECIFICATIONS
"POP-OFF" APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES PRESSURE THREAD INFORMATION
E-SL110127 New Sealco 110127 150 psi Factory Set 1/4" PT
2-112
AIR BRAKE SAFETY VALVES AND FITTINGS
SPECIFICATIONS
"POP-OFF" APPLICATION & GENERAL
EUCLID NO. NEW/REMAN REPLACES PRESSURE THREAD INFORMATION
E-SN401004 New Sloan 401004 150 psi 1/4"
TRANSMISSION VALVES
2-113
TRANSMISSION VALVES
EUCLID NO. NEW/REMAN REPLACES PORT SIZE APPLICATION AND GENERAL INFORMATION
E-FUA4900N New Fuller A4900 1/16" (All) 13 speed transmission. Models: 9513, 14613, 12513, 15613, 11613. Replaces
both the range and selector valve.
2-114
TRANSMISSION VALVES
EUCLID NO. NEW/REMAN REPLACES PORT SIZE APPLICATION AND GENERAL INFORMATION
E-FUA5010N New Fuller A5010 1/16" (All) Replaces the range valve on the 6, 7DL, 7L,8, 9, and 10 speed road ranger
transmission and range valve only on the 7DLL, 7LL, 8LL and 15 speed
Transmission. For use on transmission models: 610, 9509, 1110, 11610,
12610, 6610, 910, 11607L, 12509, 14608, 8609, 1157DL, 11608, 12510,
14609, 906, 11509, 11609, 12609, 14610, 9508. E-FUA5010N will replace the
range valve only on the transmission models: 958LL, 11608LL, 14608L, 915,
11615, 14615, 1157DL, 1258LL, 15615, 11607LL, 12515. To replace both the
range and deep reduction valve see E-FUA5015N.
EUCLID NO. NEW/REMAN REPLACES PORT SIZE APPLICATION AND GENERAL INFORMATION
E-FUA5015N New Fuller A5015 1/16" (All) E-FUA5015N will replace both the range and deep reduction valve. But if using
to replace Fullers old style selector valve, it may require changing the reduction
cylinder cover and re-routing the reduction air lines. For use on tramnsmission
models: 958LL, 11608LL, 14608LL, 915, 11615, 14615, 1157DLL, 1258LL,
15615, 11607LL, 12515.
2-115
TRANSMISSION VALVES
EUCLID NO. NEW/REMAN REPLACES PRESSURE OUTLET APPLICATION AND GENERAL INFORMATION
E-FU16743N New Fuller 16743 56-62 psi
2-116
INDEX
Friction Material
Brake Application Chart ...........................................................................3-4
Competitor Comparison Guide ................................................................3-5
Euclid Friction Material Designations.......................................................3-2
Euclid Part Number System .....................................................................3-1
New Lined Brake Shoe Box Kits ..............................................................3-7
New Lined Brake Shoes...........................................................................3-6
Non-Asbestos Brake Block ......................................................................3-3
Renew Remanufactured Lined Brake Shoe Box Kits ..............................3-9
Renew Remanufactured Lined Brake Shoes...........................................3-8
3-ii
EUCLID LINED BRAKE SHOE AND
SHOE BOX KIT PART NUMBER SYSTEM
EUCLID LINED BRAKE SHOE AND SHOE BOX KIT PART NUMBER SYSTEM
E X 2778 77
E 7901
E XK 77 4515 Q
3-1
EUCLID FRICTION MATERIAL
Euclid offers a comprehensive line of non-asbestos friction material products from brake
block and lining sets for both domestic and import vehicles to disc pad sets for hydraulic disc
brake applications.
Euclid friction materials are quality non-asbestos products designed to meet the needs of
a price sensitive market. They provide excellent stopping performance, good wear and
brake drum compatibility in a full range of "S" cam brake applications.
STANDARD
Basic friction material at the lowest price.
PREMIUM
General application material for on-highway use.
SUPREME
Medium to high friction material for a wider range of on-highway use.
HEAVY-DUTY SUPREME
For higher axle ratings and higher load applications on- and off-highway.
Euclid offers a selection of "special application" materials such as wedge brake, combina-
tion and metallic; a wide selection of disc pad sets for hydraulic disc brakes and import
brake block and lining sets.
For a complete listing of FMSI numbers available in block or lining sets, consult your Euclid
Price book (A-227).
3-2
NON-ASBESTOS BRAKE BLOCK
STANDARD
An economy non-asbestos brake block developed for the price sensitive aftermarket.
E55 Use for "S" cam brakes on trucks, tractors and trailers hauling general freight on-
Edge Color/None highway. FMVSS 121 rated at 20,000 lbs. GAWR.
FF Friction
PREMIUM
A standard "Aftermarket Level" non-asbestos brake block that exhibits some of the
E77 performance characteristics of a premium material. Use for "S" cam brakes on trucks,
Edge Color/None tractors and trailers hauling a wide range of freight on-highway. FMVSS 121 rated at
FF Friction 21,000 lbs. GAWR.
SUPREME
E78 A premium "Aftermarket Level" non-asbestos brake block that provides medium to high
Edge Color/None friction levels. Use for "S" cam brakes on trucks, tractors and trailers in heavy-duty
freight applications where higher temperatures are generated. FMVSS 121 rated at
FF Friction
23,000 lbs. GAWR.
HEAVY-DUTY SUPREME
E88 An "Aftermarket Level" heavy-duty non-asbestos brake block that has superior resis-
Edge Color/None tance to fade. Use for trucks, tractors, trailers and buses in on- and off-highway
FF Friction applications with higher than normal loads. FMVSS 121 rated at 23,000 lbs. GAWR.
SEVERE SERVICE
E98
Severe Service A premium combination, non-asbestos block for all types of hauling over all terrains.
Metallic Combines E100 metallic cam block segments with organic E78 anchor block segments.
Combination Provides excellent brake power and resistance to fade regardless of cold or hot (up to
FF/FF Friction 900°F) temperatures. FMVSS 121 rated at 23,000 lbs. GAWR.
3-3
BRAKE APPLICATION CHART
There is no such thing as "ONE" friction compound, grade or mix to satisfy the braking requirements for
all vehicles, terrain, speeds, type of load, weight, heat or road conditions.
Euclid offers a variety of compounds for your specific brake block, lining, and disc pad needs.
Use the chart below as a guide to select the proper friction material for your application.
TRUCKS
E55 20,000 / 180
TRACTORS E77 21,000 / 180
TRAILERS LEVEL E78 23,000 / 180
with 7" or larger S-Cam brakes
and A/L factors of 165 or higher
GENERAL E77 21,000 / 180
E78 23,000 / 180
LEVEL- E88 23,000 / 180
MOUNTAINOUS
LOGGING
REFUSE
LIQUID E88 21,000 / 165
SURGE LEVEL- E94 25,000 / 180
GRAIN MOUNTAINOUS E98 COMBINATION 23,000 / 180
GRAVEL
SAND
CEMENT
TRUCKS, TRACTORS, ALL SEVERE SERVICE SD1 (WEDGE BRAKE) 25,000 / 180
TRAILERS AND EQUIPMENT AND/OR OFF ROAD E94 25,000 / 180
3-4
EUCLID FRICTION MATERIALS
COMPETITOR COMPARISON GUIDE
This chart does not imply that the competitive material shown is a direct cross for Euclid.
Competitor materials may differ slightly in axle rating or AL factor from the Euclid mixes or other mixes shown, but are in the most similar category for
comparison purposes only.
3-5
3
EUCLID NEW LINED BRAKE SHOES
3-6
EUCLID NEW LINED BRAKE SHOE BOX KITS
3-7
RENEW REMANUFACTURED LINED BRAKE SHOES
3-8
RENEW REMANUFACTURED LINED BRAKE SHOE BOX KITS
3-9
EUCLID SEMI-TUBULAR RIVETS
BRASS
SIZE LENGTH PART NO.
9/64" Body x 5/16" Head 1/4" 4-4B
9/32" 4-4.5B
5/16" 4-5B
3/8" 4-6B
7/16" 4-7B
9/64" Body x 3/8" Head 1/4" 5-4B
5/16" 5-5B
3/8" 5-6B
3/4" 5-12B
3/16" Body x 3/8" Head 1/4" 7-4B
5/16" 7-5B
3/8" 7-6B
7/16" 7-7B
1/2" 7-8B
9/16" 7-9B
5/8" 7-10B
3/4" 7-12B
1" 7-16B
3/16" Body x 1/2" Head 3/8" 8-6B
7/16" 8-7B
1/2" 8-8B
9/16" 8-9B
5/8" 8-10B
3/4" 8-12B
.195/.200" Body x 1/2" Head 1/2" 20-8B
9/16" 20-9B
5/8" 20-10B
1/4" Body x 1/2" Head 1/2" 10-8B
9/16" 10-9B
5/8" 10-10B
3/4" 10-12B
STEEL
SIZE LENGTH PART NO.
3/16" Body x 3/8" Head 3/8" 7-6S
7/16" 7-7S
3/16" Body x 1/2" Head 3/8" 8-6S
7/16" 8-7S
1/2" 8-8S
9/16" 8-9S
5/8" 8-10S
.195/.200" Body x 1/2" Head 1/2" 20-8S
9/16" 20-9S
1/4" Body x 1/2" Head 7/16" 10-7S
1/2" 10-8S
9/16" 10-9S
5/8" 10-10S
NOTE: Steel Rivets are brass coated for corrosion resistance and steel for high resistance to shear.
3-10
EUCLID SEMI-TUBULAR RIVETS
EUCLID RIVETS FOR IMPORT BRAKES
EUCLID NO. DESCRIPTION BODY DIA. HEAD DIA. LENGTH
E-7039 Brass Semi-Tubular 7/32" 27/64" 1/2"
E-7041 Brass Semi-Tubular 1/4" 15/32" 2-1/32"
E-7040A Brass Semi-Tubular 6mm 11mm 15/32"
E-7360 Brass Semi-Tubular 6mm 12mm 13/32"
3
E-7043 Steel Fully-Tubular 8mm 15mm 19/32"
E-7044 Steel Semi-Tubular 8mm 15mm 19/32"
E-917X Brass Brake Bolt with Keps Nut NO. 8 3/16"-24 1" USS Coarse
SIZE
EUCLID NO. DESCRIPTION THREAD LENGTH THREAD
E-798X Brass Brake Bolt 3/8"-16 1" USS Coarse
E-628X 3/8"-16 1-1/4" USS Coarse
E-635X 3/8"-16 1-1/2" USS Coarse
E-797X 3/8"-24 1" SAE Fine
E-636X 3/8"-24 1-1/4" SAE Fine
E-583X 3/8"-24 1-1/2" SAE Fine
E-916X Brass Brake Bolt with Keps Nut 3/8"-16 1" USS Coarse
E-914X 3/8"-16 1-1/4" USS Coarse
E-912X 3/8"-16 1-1/2" USS Coarse
E-915X 3/8"-24 1" SAE Fine
E-913X 3/8"-24 1-1/4" SAE Fine
E-911X 3/8"-24 1-1/2" SAE Fine
3-11
The Euclid Brand offers
"All-Makes" Aftermarket Maintenance Components
for these Vehicle Systems:
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
3-12
FOUR
INDEX
4-ii
INNER CAP NUTS
FOR DUAL MOUNTED STEEL AND STEEL/ALUMINUM WHEELS
INNER
OUTER INNER THREAD OUTER APPLICATION &
EUCLID THREAD THREAD MIN. OVERALL GENERAL
NO. REPLACES SIZE SIZE DEPTH LENGTH INFORMATION
E-7895-L Budd 10709, 3203404 1-1/8"-16 3/4"-16 1-1/4" 2-7/32" Through Hardened. Zinc
Webb 107083, 107091 Yellow Dichromate
Meritor 1199K115 Plating
Reyco 30007
Std. Forge 303101
Navistar 41420V
Trailmobile 50-34B-2 4
Fruehauf 534767
Alcoa 5549L
Motor Wheel 84526
Fruehauf MWCX01829
NWRA X-1829
E-7895-R Budd 10708, 3203403
Webb 107080, 107082
Meritor 1199J114
Reyco 30006
Std. Forge 303100
Navistar 41419V
Trailmobile 50-34B-1
Fruehauf 534766
Alcoa 5549R
Motor Wheel 84525
Fruehauf MWCX01828
NWRA X-1828
E-7896-L Budd 3203402, 35337 2-9/16" Through Hardened
Alcoa 5735L
Fruehauf MWCX01836
NWRA X-1836
E-7896-R Budd 3203401, 35336
Alcoa 5735-R
Fruehauf MWCX01835
NWRA X-1835
E-7897-L Meritor 1199G969 1-7/8" 3-1/16"
Navistar 129302R1
Budd 22622, 88014
Trailmobile 38-7897-L
Trailmobile 700-7-80
Navistar 898376R1
Wagner 916105
NWRA X-1408
E-7897-R Meritor 1199F968
Navistar 129303R1
Budd 22621, 88013
Trailmobile 700-7-78
Navistar 898375R1
NWRA X-1407
NWRA X2122
4-1
INNER CAP NUTS
FOR DUAL MOUNTED STEEL AND STEEL/ALUMINUM WHEELS
INNER
OUTER INNER THREAD OUTER APPLICATION &
EUCLID THREAD THREAD MIN. OVERALL GENERAL
NO. REPLACES SIZE SIZE DEPTH LENGTH INFORMATION
E-7898-L Meritor 1199W1349 1-5/16"-12 15/16"-12 1-7/8" 3" Through Hardened. Zinc
Fruehauf 226604 Yellow Dichromate
Budd 3204504 Plating
Budd 49415
Trailmobile 50-34B-12
Alcoa 5575L
Navistar 698166R1
NWRA X-1412
E-7898-R Meritor 1199V1348
Fruehauf 226605
Budd 3204503
Budd 49414
Trailmobile 50-34B-11
Alcoa 5575R
Midland 67266
Navistar 698165R1
NWRA X-1411
E-10253-L Isuzu 1-42336-005-0 M30x1.5 M20x1.5 1-3/16" 2-7/16"
Hino 9004-24101
4-2
INNER CAP NUTS
FOR DUAL MOUNTED ALUMINUM WHEELS
INNER
OUTER INNER THREAD OUTER APPLICATION &
EUCLID THREAD THREAD MIN. OVERALL GENERAL
NO. REPLACES SIZE SIZE DEPTH LENGTH INFORMATION
E-5988-L Webb 105989 1-1/8"-16 3/4"-16 1-15/16" 3-1/16" Through Hardened. Zinc
Meritor 3280S7871 Yellow Dichromate
Trailmobile 50-34B-6 Plating
Alcoa 5988-L
Budd 70612
Fruehauf MWCX02139
NWRA X-2139 4
E-5988-R Webb 105988
Trailmobile 36-105988
Alcoa 5988-R
Budd 70611
Fruehauf MWCX02138
NWRA X-2138
4-3
DISC WHEEL NUTS
CAP NUTS FOR SINGLE & DUAL MOUNTED WHEELS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-5554-L Navistar 129300R1 3/4"-16 1-1/2" 1" For Single Mounting of Alcoa Forged
Budd 3205302 Aluminum Disc Wheels
Alcoa 5554-L
Budd 70614
Fruehauf MWC-X01808
NWRA X-1808
E-5554-R Navistar 129301R1
Budd 3205301
Trailmobile 38-5554-R
Budd 70613
Fruehauf MWC-X01807
NWRA X-1807
E-5995-L Alcoa 5995-L 3/4"-16 1-1/2" 1-3/8" For Alcoa Wide Base Aluminum
Fruehauf MWC-05995L Wheels. "Long Grip" Cap Nut. Larger
E-5995-R Alcoa 5995-R height provides greater lug wrench
Fruehauf MWC-05995R contact into wheel.
E-5977-L Meritor 1199M117 1-1/8"-16 1-1/2" 7/8" Forged Steel - Thru-Hardened. Zinc
Webb 178921 Yellow Dichromate Plating. Outer
Budd 3203802 Dual or Large Stud Single Mounting.
Trailmobile 50-34C-2 For Severe Service Application use
Alcoa 5552-L E-5579-L. For Clear Zinc coating use
Navistar 83156H E-5977LC.
Motor Wheel 84528
Ford BB1135
Fruehauf MWCX01832
NWRA X-1832
E-5977-R Meritor 1199N118
Webb 178910
Budd 3203801
Trailmobile 50-34C-1
Alcoa 5552-R
Navistar 83155H
Motor Wheel 84527
Ford BB1134
Fruehauf MWCX01831
Firestone NTR25
NWRA X-1831
4-4
DISC WHEEL NUTS
CAP NUTS FOR SINGLE & DUAL MOUNTED WHEELS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-5996-L Alcoa 5996-L 1-1/8"-16 1-1/2" 1" For Alcoa Wide Base Aluminum
Wheels. "Long Grip" Cap Nut. Larger
E-5996-R Alcoa 5996-R height provides greater lug wrench
contact into wheel.
4-5
DISC WHEEL NUTS
FLANGED CAP NUTS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-10234 Alcoa 389927 9/16"-18 1-1/16" 1-31/32" 2 piece flanged nut.
E-5892 World Truck 1338003 9/16"-18 7/8" 5/8" 1 piece flanged nut.
Trailmobile 38-5892
GMC 3988631
Dana/Spicer 51-1029
Dorman 611-054
E-9022-R World Truck 133-9005R 5/8"-18 1-1/8" 1-1/16" Dodge and Navistar. 2 piece flanged
CHRYSLER 3637720 nut.
Navistar 437858C1
Budd 95188
Meritor R009022R
NWRA X1837
E-5734 World Truck 1338002 11/16"-16 1-1/8" 1-1/16" Use E-5683 Stud on Rear and E-
Trailmobile 21-W182 5682 Stud on Front. 1 piece flanged
Std. Forge 303119 nut.
GMC 3771410
Trailmobile 38-5734
Gunite 45681
Dana/Spicer 511030
Dorman 611-043
Budd 81269
Gunite K-45681
Firestone NT-30
NWRA X-1110
E-5704 Budd 84608 3/4"-16 1-1/8" 1-1/16" 1 piece flanged nut.
Ford C3TZ1120A
NWRA X-1342
E-9021 7/8"-14 1-5/16" 7/8" General Motors Bus. 2 piece flanged
nut.
E-10235 GMC 15642921 M20x1.5 30mm 1-1/16" Teflon Coated. 2 piece flanged nut.
Webb 179920 27mm
Volvo White GMC 947971-8
Ford E6HZ1120B
Ford F0HZ1012A
NWRA X-2081
E-5991 Navistar 1610751C1 M22x1.5 1-1/2" 1-3/8" For Motor Wheel WHD-8 (8 Stud)
Webb 179955 Hub Piloted Wheel System. 2 piece
Trailmobile 50-34C-19 flanged nut.
Motor Wheel 88881
Fruehauf MWC-X02143
NWRA X-2143
4-6
DISC WHEEL NUTS
FLANGED CAP NUTS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-6000A Erie 5326RH M22x1.5 33mm 1-7/32" Teflon Coated For Budd
31mm Uni-Mount-10 (10 Stud) Hub Piloted
Wheel. 2 piece flanged nut.
E-9020 World Truck 133-9008 M22x1.5 33mm 1-1/32" Alcoa Hub Piloted Wheels.
Navistar 1649492C1 26mm 2 piece flanged nut.
GMC 2071619
Alcoa 39691
Alcoa 39949 4
Meritor A1227Z1404
Ford E6HZ1120A
NWRA X2159
WHEEL NUTS
BACK NUTS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-4961A Dana/Spicer 341551 3/4"-16 1-1/16" 2-1/32" Heat Treated Locknut
Budd 41073-7
Budd 47693-7
Webb 75716
Motor Wheel 82700
Fruehauf MWC-X01068
Meritor N1121
Meritor NL1121
NWRA X-1068
E-1835 Mack 21AX480 7/8"-14 1-1/4" 49/64" Heat Treated
GMC 2236581
Freightliner 23-09598-14
Freightliner 2309598014
Hendrickson 29248
Navistar 349510C1
Budd 47693-8
Hendrickson 4842
Fruehauf FSP-004-02-013
4-7
WHEEL NUTS
BACK NUTS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD HEX HIGH INFORMATION
E-1828 Hendrickson 08017000 1"-14 1-1/2" 7/8" Heat Treated
Freightliner 23-9901-216
GMC 2320989
Ford 3538353
Navistar 422821R1
Budd 44672-9
Volvo White GMC 828325
Fruehauf MNW-934005-02D
Fruehauf MNW-934005-02S
NWRA X-1445
4-8
WHEEL STUDS
ROUND COLLAR SHOULDER STUDS - Stud Body Diameter .781
EUCLID NO. REPLACES A B C D E F
E-11722-L Meritor 09001828 4-11/32" 3" 1-25/32" 1-1/4" 1-3/32" 3/32"
4-9
WHEEL STUDS
ROUND COLLAR SHOULDER STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C D E F
E-5716-L Budd 80698 4-11/32" 3" 1-15/16" 1-1/4" 1-1/16" 3/32"
Fruehauf MWC-X01615
NWRA X-1615
E-5716-R Budd 80697
Fruehauf MWC-X01614
NWRA X-1614
E-5717-L Budd 69206 4-17/32" 1-11/32" 1-5/32"
NWRA X-2108
E-5717-R Budd 69205
NWRA X-2107
E-5589-L Webb 101301 4-5/8" 3-9/32" 2" 1-1/4" 1-1/8"
Meritor 20X601
Fruehauf 582885
Budd 83813
Fruehauf ACD7629PK2
Fruehauf MWC-X01617
Paccar SNNK017L
NWRA X-1617
E-5589-R Webb 101302
Meritor 20X602
Fruehauf 582884
Budd 83812
Fruehauf ACD7629PK1
Fruehauf MWC-X01616
Paccar SNNK017R
NWRA X-1616
E-8948-L Budd 101322 4-29/32" 3-17/32" 2-5/32" 31/32"
4-10
WHEEL STUDS
CLIPPED COLLAR SHOULDER STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C D E
E-5559-L Budd 13989 3-23/32" 2-3/16" 1-1/16" 1-11/32" 1-5/32"
Meritor 20X37
Budd 3025202
Fruehauf 534783
Navistar 698795R1
Fruehauf MWC-X01563
NWRA X-1563
E-5559-R Budd 13988
Meritor 20X38
Budd 3025201 4
Fruehauf 534782
Navistar 698794R1
Fruehauf MWC-X01562
NWRA X-1562
E-5561-L Budd 13991 3-31/32" 2-7/16" 1-5/32"
Webb 139913
Meritor 20X53
Fruehauf 534773
NWRA X-1569
E-5561-R Budd 13990
Webb 139902
Meritor 20X52
Meritor 20X53
Fruehauf 534772
NWRA X-1568
E-5560-L Budd 19005 4-1/32" 2-1/2" 1-9/32" 1-5/32"
Fruehauf 509360
Fruehauf MWC-X01573
NWRA X-1573
E-5560-R Budd 19004
Fruehauf 508865
Fruehauf MWC-X01572
NWRA X-1572
E-5551-L Budd 17124 4-7/32" 2-11/16" 1-7/16"
Mack 18AX424
Meritor 20X59
Navistar 44669H, 48796H
Fruehauf 502786
NWRA X-1575
E-5551-R Budd 17123
Mack 18AX423
Meritor 20X58
Navistar 44668H, 48797H
Fruehauf 502787
NWRA X-1574
E-5585-L Meritor 20X71 4-11/32" 2-13/16" 1-25/32"
Budd 22006
Trailmobile 50-33A-38
NWRA X-1579
E-5585-R Meritor 20X70
Budd 22005
Trailmobile 50-33A-37
NWRA X-1578
4-11
WHEEL STUDS
CLIPPED COLLAR SHOULDER STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C D E
E-5553-L Budd 16272 4-17/32" 3" 1-29/64" 1-11/32" 1-5/32"
Meritor 20X67
Trailmobile 50-33A-16
Fruehauf 535921
Navistar 59864H
Fruehauf MWC-X01581
NWRA X-1581
E-5553-R Budd 16271
Meritor 20X66
Trailmobile 50-33A-15
Fruehauf 535920
Navistar 59863H
Fruehauf MWC-X01580
NWRA X-1580
E-10200-L Conmet 100330 1-9/16"
Freightliner 11-9714-006
E-10200-R Conmet 100329
Freightliner 11-9714-007
E-6023-L Conmet 100118 4-27/32" 3-5/16" 1-21/32"
Meritor 20X143
Budd 21943
NWRA X-1587
E-6023-R Conmet 100117
Meritor 20X142
NWRA X-1586
E-5557-L Budd 16004 5-1/32" 3-1/2" 2-15/32"
Mack 18AX990
Meritor 20X41
Fruehauf 534785
Navistar 698797R1
NWRA X-1589
E-5557-R Budd 16003
Mack 18AX989
Meritor 20X42
Fruehauf 534784
Navistar 698796R1
NWRA X-1588
E-6024-L Conmet 100257 5-1/4" 3-5/16" 1-21/32" 1-3/4"
4-12
WHEEL STUDS
CLIPPED COLLAR SHOULDER STUDS - Stud Body Diameter .784
EXTRA LONG CAP NUT END
EUCLID NO. REPLACES A B C D CAUTION
E-5989-L Conmet 100524 4-29/32" 3-3/8" 1-55/64" 1-23/64" Caution: Do not
Freightliner 11-9714-5 use with Steel
Webb 18301 wheel. Cap nut
Webb 183101 will bottom out
E-5989-R Conmet 100525 before tightening
Freightliner 11-9714-4 against wheel.
Webb 183102
E-5933-L Freightliner 11-9714-0 5-1/8" 2-3/4" 1-11/16" 2-1/4"
Budd 95692 4
NWRA X-1593
NWRA X1583
E-5933-R Freightliner 11-9714-1
Budd 95691
NWRA X-1592
E-5929-L Freightliner 11-9714-15 5-3/16" 3" 1-5/16" 2"
NWRA X-2056
E-5929-R Conmet 100524/5
Freightliner 11-9714-16
NWRA X-2055
E-5930-L Freightliner 11-9714-13 5-9/16" 3-3/8" 1-3/4"
NWRA X-2058
E-5930-R Conmet 100526
Freightliner 11-9714-14
NWRA X-2057
4-13
BUS AND HEAVY-DUTY STUDS
DOUBLED-ENDED ROUND COLLAR STUDS - Stud Body Diameter .973
EUCLID NO. REPLACES A B C D E
E-9006 Meritor 20X2128 4-1/4" 1-7/8" 15/16" 2-1/16" 7/16"
DOUBLE-ENDED STUDS WITH FLATS - Stud Body Diameter .784 - For Steel Wheels
EUCLID NO. REPLACES A B C D
E-3723-L Meritor 20X90 3-3/16" 1-19/32" 5/8" 1-13/32"
Budd 32310
NWRA X-1513
E-3723-R Meritor 20X89
Budd 32309
NWRA X-1512
E-3728-L Budd 35090 4-11/32" 2-3/4" 1-13/16"
NWRA X-1525
E-3728-R Budd 35089
NWRA X-1524
DOUBLE-ENDED STUDS WITH FLATS - Stud Body Diameter .784 - For Aluminum Wheels
EUCLID NO. REPLACES A B C D
E-5935-L Budd 95712 3-3/4" 1-7/8" 23/32" 1-11/16"
NWRA X-1517
E-5935-R Budd 95711
NWRA X-1516
E-5936-L Budd 31704 3-15/16" 2-1/16" 31/32"
Budd 95708
NWRA X-1521
E-5936-R Budd 31703
Budd 95707
NWRA X-1520
E-5937-L Budd 90218 4-1/4" 2-7/16" 1-7/32" 1-5/8"
NWRA X-1523
E-5937-R Budd 90217
NWRA X-1522
E-5990-L Freightliner 10-9607-001 4-9/16" 2-3/4" 1-37/64" 1-1/2"
E-5990-R Freightliner 10-9607-000
4-14
BUS AND HEAVY-DUTY STUDS
Stud Body Diameter .973
EUCLID NO. REPLACES A B C D
E-5922-L Meritor 20X1241 4" 2" 1-3/16" 1-3/4"
Meritor 20X1867
Navistar 549807C1
NWRA X-1948
E-5922-R Meritor 20X1242
Meritor 20X1868
NWRA X-1947
4
DOUBLE-ENDED STUDS WITHOUT FLATS - Stud Body Diameter 1.220
EUCLID NO. REPLACES A B C D E
E-8976-L Meritor 20X1761 5-5/16" 3-5/8" 2-3/32" 1-11/16" 1"
Meritor 20X2233
Gunite W1060L
E-8976-R Meritor 20X1760
Meritor 20X2234
Gunite W1060R
WHEEL STUDS
WEDGE HEAD TYPE STUDS - Stud Body Diameter .788
EUCLID NO. REPLACES A B C D
E-9005-L Meritor 20X2089 2-5/8" 1" 1-1/4" 1-1/4"
WEDGE HEAD TYPE STUDS - Stud Body Diameter .792 - For Aluminum Hubs
EUCLID NO. REPLACES A B C D
E-5924-L Meritor 20X1334 3-13/32" 1-7/16" 1-5/8" 2-1/4"
Meritor 20X1463
Meritor 20X1978
Mack 8235-20X1463
NWRA X-1914
E-5924-R Meritor 20X1335
Meritor 20X1464
Meritor 20X1977
Mack 8235-20X1464
NWRA X-1913
E-5916-L Meritor 20X1311 3-35/64" 1-13/16" 1-1/16" 2-31/64"
Meritor 20X1459
NWRA X-1916
E-5916-R Meritor 20X1312
Meritor 20X1460
NWRA X-1915
E-9002-L Meritor 20X1471 3-3/4" 1-1/2" 1-3/4" 1-3/4"
4-15
WHEEL STUDS
WEDGE HEAD TYPE STUDS - Stud Body Diameter .792 - For Aluminum Hubs
EUCLID NO. REPLACES A B C D
E-5923-L Meritor 20X1309 3-51/64" 1-13/16" 1-1/8" 2-5/8"
Meritor 20X1457
Navistar 469025C1
NWRA X-1918
E-5923-R Meritor 20X1310
Meritor 20X1458
Navistar 469026C1
NWRA X-1917
E-9000-L Meritor 20X1307 3-31/32" 1-5/16" 2" 1-3/4"
Navistar 549809C1
NWRA X2044
E-9000-R Meritor 20X1308
Navistar 549810C1
NWRA X2043
4-16
WHEEL STUDS
FRONT WHEEL STUDS - Stud Body Diameter 1.216
EUCLID NO. REPLACES A B C D
E-11696-L Meritor 09001669 3-13/32" 1-5/16" 1-13/16" 1/2"
E-11696-R Meritor 09001668
E-9001-L Meritor 20X1357 3-15/32" 7/8" 1-29/64" 7/16"
Meritor 20X1477
Meritor 20X1478
Dana/Spicer 501093L
Dana/Spicer 501093R
NWRA X2038
E-9001-R Meritor 20X1356
Meritor 20X1477 4
Meritor 20X1478
Dana/Spicer 501093L
Dana/Spicer 501093R
NWRA X2037
E-8972-L GMC 15552787 3-1/2" 1-3/16" 2-1/32" 3/4"
Navistar 292963C1
Navistar 593096C1
Ford E4HZ1108E
Ford E8HZ1107B
Gunite W1118L
Gunite W720L
Gunite W788L
Gunite W988L
E-8972-R GMC 15552788
Navistar 292964C1
Navistar 593097C1
Ford E4HZ1107E
Ford E8HZ1107A
Gunite W1118R
Gunite W720R
Gunite W788R
Gunite W988R
E-8995-L Motor Wheel 87143 3-9/16" 1-7/16" 1-3/4" 1"
NWRA X1767
E-8995-R Motor Wheel 87142
NWRA X1766
E-6033-L Budd 100018 3-5/8" 1-3/4" 1-7/8" 1/2"
Webb 100181
Eaton 100858006
E-6033-R Budd 100017
Webb 100170
Eaton 100858010
4-17
WHEEL STUDS
FRONT WHEEL STUDS - Stud Body Diameter 1.220
EUCLID NO. REPLACES A B C D
E-5749-L Meritor 20X371 2-13/16" 7/8" 1-7/32" 7/16"
Meritor 20X379
Navistar 224957R1
Budd 82576
Paccar PAC5L
NWRA X-1726
E-5749-R Meritor 20X372
Meritor 20X380
Navistar 224958R1
Budd 82575
Paccar PAC5R
NWRA X-1725
E-5750-L Meritor 20X585 3" 1-3/8" 1-5/8" 1"
Navistar 447556R1
Budd 83854
NWRA X-1728
E-5750-R Meritor 20X584
Navistar 447557R1
Budd 82853
NWRA X-1727
E-5899-L Meritor 20X747 3-1/8" 1-19/32" 1-17/32" 3/8"
NWRA X-1928
E-5899-R Meritor 20X746
Navistar 753613C1
NWRA X-1927
E-8966-L GMC 15543998 3-9/16" 1-9/16" 1-23/32" 1/2"
Mack 18AX1159
GMC 2075453
Meritor 20X1755
Ford D5HZ1108A
Gunite W1104L, W932L
Gunite W826L, W890L
E-8966-R GMC 15514399
Mack 18AX1158
GMC 2075454
Meritor 20X1754
Ford D5HZ1107A
Gunite W1104R, W932R
Gunite W826R, W890R
E-5868-L Webb 133609 3-5/8" 1-13/16" 1-13/16" 3/4"
Navistar 469610C1
Navistar 469610C7
Navistar 773434C1
Budd 85382, 99617
Eaton F18479
NWRA X-1732
E-5868-R Webb 133610
Navistar 469609C1
Navistar 469609C7
Navistar 773433C1
Budd 85381, 99616
Eaton F184710
NWRA X-1731
4-18
WHEEL STUDS
FRONT WHEEL STUDS - Stud Body Diameter 1.220
EUCLID NO. REPLACES A B C D
E-8985-L Gunite W1203L 3-13/16" 1-3/16" 2-1/2" 3/4"
FRONT WHEEL STUDS - Stud Body Diameter 1.220 - For Aluminum Disc Wheels
EUCLID NO. REPLACES A B C D E
E-10224-L Meritor 20X469 2-29/32" 1-3/8" 1-7/32" 1/4" 1"
Meritor 20X583
NWRA X2034
E-10224-R Meritor 20X460
Meritor 20X582
NWRA X2033
E-5982-L Peterbilt 02-00771 3-3/4" 1-7/32" 2-1/4" 1/8" 9/16"
Kenworth K233B359L
NWRA X-2134
E-5982-R Peterbilt 02-00772
Kenworth K233B359R
NWRA X-2133
E-10249-L Meritor 20X1475 1-3/8" 2-1/2" 5/8" 1/2"
NWRA X-2112
E-10249-R Meritor 20X1476
NWRA X-2111
E-5985-L Meritor 20X587 3-25/32" 1-7/16" 7/32" 1"
NWRA X-2114
E-5985-R Meritor 20X586
NWRA X-2113
FRONT WHEEL STUDS - Stud Body Diameter 1.220 - For Aluminum Disc Wheels
EUCLID NO. REPLACES A B C
E-10227-L Conmet 103189 3-3/32" 1-5/32" 1-15/32"
4-19
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .630
EUCLID NO. REPLACES A B C
E-10229 GMC 2202033 2-15/16" 3/4" 1-1/4"
GMC 3694508
Gunite K-34460
E-10230 GMC 3697043 3-3/16" 1" 1-1/2"
Gunite K-43939
4-20
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C D
E-10208-L Conmet 102279 3-13/32" 1-7/16" 1-5/8" 1/2"
4-21
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .974
EUCLID NO. REPLACES A B C D
E-5720-L Meritor 20X207 3-5/32" 2-3/4" 1-15/32" 17/32"
Navistar 277773C1
Budd 63626-1
Budd 63626E1
Navistar 89764R1
NWRA X-1394
E-5720-R Meritor 20X206
Navistar 277774C1
Budd 63625-1
Budd 63625E1
Navistar 89765R1
NWRA X-1393
E-6057-L Motor Wheel 90802 3-3/16" 1-3/16" 1-5/32" 1"
DRIVE AXLE STUD - Stud Body Diameter .975 - For Aluminum Disc Wheels
EUCLID NO. REPLACES A B C D E
E-5983-L Peterbilt 03-02853 3-3/4" 1-3/8" 2-1/4" 1/4" 1"
NWRA X-2132
4-22
WHEEL STUDS
SERRATED WHEEL STUDS
BODY DIA.
EUCLID NO. REPLACES "A" A B C D
E-8958-L Dayton-Walther 09-861902 .772 2-7/8" 1-1/2" 1-3/16" 1/2"
E-8958-R Dayton-Walther 09-861901
E-8955-L Navistar 576711C1 .778 3-3/8" 1-9/32" 1-15/16"
E-8955-R Navistar 576712C1
E-8957-L Ford E4HZ1108B 3-1/2" 1-25/32" 1-9/32"
E-8957-R Ford E4HZ1107B
E-8954-L Fruehauf MDS001327 3-27/32" 2-11/32"
E-8954-R Fruehauf MDS001326
E-11680-L Meritor 09869702 .780 2-3/8" 1" 1-1/16"
4
E-11680-R Meritor 09869701
E-11673-L Meritor 09001966 2-21/32" 7/8" 1-11/32"
E-11673-R Meritor 09001965
E-11664-L Meritor 09001540 3-1/8" 1-21/32" 1-5/16"
E-11664-R Meritor 09001539
E-11667-L Meritor 09001651 .782 2-3/4" 1-3/8" 1-13/64"
E-11667-R Meritor 09001650
E-11668-L Meritor 09001653 2-7/8" 1" 1-3/4"
E-11668-R Meritor 09001652
E-11666-L Meritor 09001615 2-15/16" 1-1/16"
E-11666-R Meritor 09001614
E-9011-L Webb 159191 .784 2-3/8" 7/8" 1-1/16"
E-9011-R Webb 159190
E-8978-L Meritor 20X1746 3-13/32" 1-29/32" 1-7/32"
Mack 3398W883L
Gunite W1073L
E-8978-R Meritor 20X1747
Mack 3398W883R
Gunite W1073R
E-8977-L Fruehauf MMGW1061L 3-7/8" 2-1/16" 1-11/16"
E-8977-R Fruehauf MMGW1061R
E-11658-L Meritor 09001255 .790 2-9/16" 1-5/64" 1-1/4"
E-11658-R Meritor 09001254
E-11660-L Meritor 09002048 .890 2-1/8" 11/16"
E-11660-R Meritor 09002047
E-11681-L Meritor 09002211 2-27/64" 1" 1-15/64"
E-11681-R Meritor 09002210
E-11682-L Meritor 09002205 2-11/16" 1-1/8" 1-3/8" 3/8"
E-11682-R Meritor 09002204
E-5911-L Navistar 131281R1 .974 2-9/16" 15/16" 1-1/4" 7/16"
Meritor 20X403
NWRA X-1885
E-5911-R Navistar 131282R1
Meritor 20X402
NWRA X-1884
E-5721-L Meritor 20X121 2-13/16" 1-3/16" 1-3/16" 3/8"
Meritor 20X405
Navistar 443660C1
Budd 82579
Navistar 98726R1
NWRA X-1844
E-5721-R Meritor 20X404
Navistar 443661C1
Navistar 98727R1
NWRA X-1843
4-23
WHEEL STUDS
SERRATED WHEEL STUDS
BODY DIA.
EUCLID NO. REPLACES "A" A B C D
E-9010-L Webb 101173 .974 2-27/32" 13/16" 1-1/8" 1/2"
E-9010-R Webb 101172
E-5910-L Meritor 20X345 3-1/8" 1-5/16" 7/16"
NWRA X-1889
E-5910-R Meritor 20X344
NWRA X-1888
E-9524-L Webb 101175 3-3/16" 25/32" 1-19/32" 1/2"
E-9524-R Webb 101174
E-9525-L Webb 101179 3-11/32" 25/32"
E-9525-R Webb 101178
E-5909-L Meritor 20X853 1-27/32" 1-1/16"
Navistar 351138C1
NWRA X-1894
E-5909-R Meritor 20X852
Navistar 351139C1
NWRA X-1893
E-5722-L Meritor 20X478 4" 2-7/16" 1-3/16" 1-5/8"
Budd 83852
NWRA X-1379
E-5722-R Meritor 20X1283
Meritor 20X477
Budd 83851
NWRA X-1378
E-9523-L Webb 101171 .974" 2-19/32" 13/16" 1-1/8" 1/4"
4-24
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C NOTES
E-4964-L Budd 59365 2-1/8" 3/4" 1/4" Used on TK, TKL, RL,
NWRA X-1859 TL (also Eaton). With
E-4964-R Budd 59364 some cast drums on TK,
NWRA X-1858 TKL, use E-4968-R/L.
E-4965-L Meritor 20X1805 2-3/8" 1" Used on RN, RQ, TKN.
Navistar 22423V
Trailmobile 50-33A-28
Budd 59192
Navistar 878211R1
Gunite K36708 4
NWRA X-1081
E-4965-R Meritor 20X1806
Navistar 22422V
Trailmobile 50-33A-27
Budd 59191
Navistar 878210R1
Gunite K36707
NWRA X-1080
E-4966-L Dayton-Walther 09-853602 2-5/8" 1-1/4" 5/16"
Navistar 184197R1
Meritor 20X431
Trailmobile 50-33A-30
Budd 59264
Navistar 983878R1
Fruehauf MWC-X01713
NWRA X-1713
E-4966-R Dayton-Walther 09-853601
Navistar 184198R1
Meritor 20X430
Trailmobile 50-33A-29
Budd 59263
Navistar 793879R1
Fruehauf MWC-X01712
NWRA X-1712
E-4967-L Meritor 20X1575, 20X1811 2-7/8" 1-1/2" 1/4"
GMC 3723967
Budd 61969
NWRA X-1824
E-4967-R Meritor 20X1576, 20X1812
GMC 3723968
Budd 61968
NWRA X-1823
E-4968-L Webb 198521 1/2"
Meritor 20X1571, 20X997
Budd 49852
Trailmobile 50-33A-26
Volvo 6043826
Fruehauf MWC-X01385
NWRA X-1385, X-2042
E-4968-R Webb 198510
Meritor 20X1572, 20X996
Meritor 20X1816
Budd 49851
Trailmobile 50-33A-25
Volvo 6043825
Fruehauf MWC-X01384
NWRA X-1384
4-25
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .784
EUCLID NO. REPLACES A B C NOTES
E-4969-L Meritor 20X1469 3-1/8" 1-3/4" 9/16" Used on TK, TKL, RL,
Budd 59184 TL (also Eaton). With
Trailmobile 700-7-79 some cast drums on TK,
Fruehauf MWC-X01387 TKL, use E-4968-R/L.
NWRA X-1387 Used on RN, RQ, TKN.
E-4969-R Meritor 20X1470
Budd 59183
Trailmobile 700-7-77
Fruehauf MWC-X01386
NWRA X-1386
E-5869-L Budd 59372 4-1/8" 2-3/4"
NWRA X-1711
E-5869-R Budd 59371
NWRA X-1710
4-26
WHEEL STUDS
SERRATED WHEEL STUDS
STUD BODY DIA.
EUCLID NO. REPLACES "A" "B" A B C D
E-11678-L Meritor 09002086 .890 .939 2-49/64" 7/8" 1-39/64" 1/2"
E-11678-R Meritor 09002085
E-11675-L Meritor 09001985 2-53/64" 1" 1-11/16" 3/4"
E-11675-R Meritor 09001984
E-11677-L Meritor 09001996 3-3/64" 57/64" 1-51/64" 1/2"
Paccar SVVN615
E-11677-R Meritor 09001995 4
Paccar SVVN614
4-27
WHEEL STUDS
SERRATED WHEEL STUDS - Stud Body Diameter .784
EUCID NO. REPLACES A B C D
E-5766-L Budd 59374 3-7/8" 2-1/2" 9/16" 5/16"
Fruehauf MWC-X01709
NWRA X-1709
4-28
WHEEL STUDS
SERRATED WHEEL STUDS
STUD BODY
DIA.
EUCID NO. REPLACES "A" "B" A B C D E
E-8946-L Budd 98349 .639" .673" 2-15/16" 15/16" 7/16" .673 1-11/16"
NWRA X1842
4-29
WHEEL STUDS
"D" HEAD STUDS - Stud Body Diameter .888 - For Dura-Light Hubs
EUCLID NO. REPLACES A B C D
E-10258-L 2-1/16" 5/8" 1-1/8" 5/16"
E-10258-R
E-10259-R
4-30
WHEEL STUDS
CLIPPED HEAD STUDS - Stud Body Diameter .907 - Plain Body
EUCLID NO. REPLACES A B C D
E-11685-L Meritor 09002024 2-3/32" 7/16" 23/32" 1-25/64"
E-11685-R Meritor 09002023
E-11684-L Meritor 09002022 2-3/8" 1-21/32"
E-11684-R Meritor 09002021
E-11686-L Meritor 09002026 2-25/64" 1-43/64"
E-11686-R Meritor 09002025
E-11687-L Meritor 09002028 2-43/64" 1-61/64"
E-11687-R Meritor 09002027
4
CLIPPED HEAD STUDS - Stud Body Diameter .910
EUCLID NO. REPLACES A B C
E-8952-L Conmet 101773 3-5/32" 1-3/16" 1-1/4"
Motor Wheel 90442
4-31
WHEEL STUDS
CLIPPED HEAD STUDS - Stud Body Diameter 1.224 - Plain Body
EUCLID NO. REPLACES A B C
E-8950-L Conmet 100149 3-23/32" 1-1/2" 1-3/4"
Conmet 100264
NWRA X2207
4-32
WHEEL STUDS - METRIC
METRIC CLIPPED HEAD STUDS - Stud Body Diameter .907 - Plain Body
EUCLID NO. REPLACES A B C D
E-11693 Meritor 09001962 3-1/2" 15/16" 29/64" 5/16"
Paccar SVVN611
Stud Body Diameter .910 METRIC "D" HEAD STUDS - Stud Body Diameter .910
EUCLID NO. REPLACES A B C
E-6029A Conmet 101151 4-3/8" 1-19/64" 2-1/2"
Motor Wheel 89983
Fruehauf MWC-101151
E-6001A Conmet 101171 4-31/32" 1-19/64" 3-1/4"
Motor Wheel 89774
Fruehauf MWC-089774
E-6030A Conmet 101150 5-1/4" 1-19/64" 3-11/32"
Fruehauf MWC-101150
4-33
WHEEL STUDS - METRIC
METRIC SERRATED STUDS
STUD BODY DIA.
EUCLID NO. REPLACES "A" "B" A B C D
E-8960 Ford E6HZ1107A .982 1.001 3-7/16" 2" 1" 1/2"
4-34
WHEEL STUDS - METRIC
METRIC SERRATED STUDS - Stud Body Diameter .901
EUCLID NO. REPLACES A B C D
E-11719 Meritor 09002184 2-15/16" 7/8" 1-49/64" 3/8"
4
METRIC SERRATED STUDS - Stud Body Diameter .910
EUCLID NO. REPLACES A B C D
E-10222 Conmet 103193 3-21/32" 1-7/32" 2-3/32" 1/2"
E-10218 Conmet 102033 3-31/32" 1-9/16" 2-1/16" 1/2"
E-10215 Conmet 102188 4-3/32" 1-1/16" 2-11/32" 1/2"
Motor Wheel 91161
E-10223 Conmet 103431 4-5/32" 1-7/32" 2-3/32" 1/2"
E-10219 Conmet 102290 4-15/32" 1-9/16" 2-9/16" 1/2"
Motor Wheel 91165
E-10216 Conmet 102189 4-19/32" 1-1/16" 2-27/32" 1/2"
Motor Wheel 91159
E-10217 Conmet 102190 4-31/32" 1-1/16" 3-7/32" 1/2"
E-10220 Conmet 102291 4-31/32" 1-9/16" 3-1/16" 1/2"
Motor Wheel 91163
E-10221 Conmet 102292 5-11/32" 1-9/16" 3-7/16" 1/2"
4-35
WHEEL STUDS - METRIC
METRIC SERRATED STUDS - Stud Body Diameter 1.22
EUCLID NO. REPLACES A B C D
E-8986 Gunite W1205 4-13/32" 1-3/16" 2-7/8" 3/4"
METRIC CLIPPED "D" HEAD STUDS - Stud Body Diameter .888 - For Dura-Light Hubs
EUCLID NO. REPLACES A B C
E-10256 3-3/8" 1/2" 2-1/2"
4-36
DRIVE FLANGE STUDS
BUDD, DAYTON, GUNITE, MERITOR
HUB END NUT END
EUCLID THREAD THREAD
NO. REPLACES BODY DIA. LENGTH THREAD LENGTH THREAD LENGTH
E-5799 Dayton-Walther 08-004350 1/2" 2-1/2" 1/2"-13 3/4" 1/2"-20 13/16"
Webb 152026
Budd 19937
Gunite WP-81
NWRA X-1777
E-11649 Meritor 08205435 2-7/8" 53/64" 63/64"
E-11648 Meritor 08205373 3" 1" 1/2"-13 1"
E-11652 Meritor 08205741 3-1/32" 4
E-5944 Meritor 4X1612 9/16" 2-1/2" 9/16"-12 13/16" 9/16"-18 7/8"
Gunite WP-693
E-11647 Meritor 08205435 1" 29/32"
E-11650 Meritor 08205575 2-59/64" 1-1/4" 1"
E-11646 Meritor 08007591 5/8" 2-7/8" 5/8"-11 1-5/32" 5/8"-18 1-1/8"
E-11651 Meritor 08205740 2-15/16" 27/32" 5/8"-11 1-3/8"
E-11654 Meritor 08205833 3-1/32" 61/64" 5/8"-18 1-23/64"
E-5946 Meritor SC1020 2-1/2" 15/16" 1"
E-5800 Dayton-Walther 08-007775 2-3/4" 1"
Navistar 119345H
Budd 63606
Meritor SC1022
Meritor SC10221
Paccar SVVN605
Gunite WP-174
NWRA X-1792
E-5947 Navistar 684368R1 2-7/8" 15/16"
Meritor SC1023
Meritor SC10231
E-5954 Dayton-Walther 08-008551 1" 1-1/16"
E-5801 Budd 48966 3-1/16" 1-1/8"
NWRA X-1793
E-5949 Meritor SC1026 3-1/4" 15/16" 1"
Meritor SC10261
E-5872 Conmet 100383 3-11/16" 1-17/32" 1-1/8"
World Truck 1511011
Trailmobile 38-5872
Meritor 4X1027
Dana/Spicer 54-1621
Navistar 60421R1
Motor Wheel 86478
Kenworth K233B305
E-5955 Dayton-Walther 08-007471 3/4" 3-1/4" 3/4"-10 1-1/8" 3/4"-16 1-1/4"
Navistar 611428
Navistar 61142H
E-11655 Meritor 08205879 3-5/16" 1-3/64" 1-17/32"
E-4960 Budd 37173 3-3/4" 1-1/8" 1-5/8"
Budd 37179
Budd 3927302
Budd 49328
Meritor 4X1207
Navistar 55585H
Budd 99357
Gunite WP-39
4-37
Special Order Service
Need assistance?
Let Euclid's Special Order Service ( S.O.S .) help you find your parts.
Euclid's position as the market leader provides you access to a comprehensive array of
truck parts products from the industry's leading manufacturers. Through Euclid, these
entire product lines are available to you just by placing a phone call to Euclid's S.O.S.
Department at 866-238-2543 (option 2) in the U.S. or 800-387-3889 in Canada.
4-38
DRIVE FLANGE STUDS
DRIVE FLANGE & GENERAL PURPOSE STUDS
HUB END NUT END
THREAD THREAD
EUCLID NO. BODY DIA. LENGTH THREAD LENGTH THREAD LENGTH
E-4942 1/2" 2" 1/2"-13 11/16" 1/2"-20 1-1/16"
E-4944 2-1/2" 13/16" 1-3/16"
E-4945 2-3/4" 15/16" 1-7/16"
E-4946 3" 1-3/4"
E-4947 3-1/2" 2-1/4"
E-4948 9/16" 2-1/2" 1/2"-13 7/8" 1/2"-20 1-1/4" 4
E-4949 2-3/4" 9/16"-12 15/16" 9/16"-18 1-1/2"
E-4950 3-1/4" 1-15/16"
E-4951 5/8" 2-5/8" 5/8"-11 5/8"-18 1-1/4"
E-5702 1-1/16" 1-1/16"
E-4952 3" 7/8" 1-13/16"
E-4953 3-1/2" 2-1/4"
METRIC
HUB END NUT END
THREAD THREAD
EUCLID NO. BODY DIA. LENGTH THREAD LENGTH THREAD LENGTH
E-11657 5/8" 2-23/32" 5/8"-11 27/32" M16 x 1.5-6g 31/32"
4-39
XpresswayPlus.com
XpresswayPlus is easy to find, can reduce phone calls, and save you valuable time.
4-40
DRIVE FLANGE WEDGES
DRIVE FLANGE WEDGE (Plated)
EUCLID NO. REPLACES INNER DIA. OUTER DIA. LENGTH
E-5952 Mack 11EHT31 7/16" 11/16" 13/32"
Meritor 1246Z234
Volvo 467837
Mack 63SP29
Navistar 72342R1
E-5736 Ford BB1142A 7/16" 3/4" 5/16"
E-5737 Meritor 1246X232 7/16" 3/4" 13/32"
Meritor 1246Z1170
GMC 2124231
Volvo 304981 4
Mack 35AX600
Navistar 974272R1
Ford BB1142B
E-5738 Ford 3651372 7/16" 13/16" 11/32"
E-5739 Spicer 54-1633 1/2" 13/16" 5/16"
E-5740 1 Meritor 1246A1171 1/2" 13/16" 13/32"
Meritor 1246T306
White Truck 466885
Ford 7EQ1142
Navistar 972423R1
E-5957 Mack 11BMT148 1/2" 7/8" 15/32"
Meritor 1246B28
Navistar 132896H1
GMC 652328
Ford C3TZ4A106A
E-5742 Spicer 54-1636 9/16" 7/8" 3/8"
E-5743 Meritor 1246Y233 5/8" 1" 15/32"
Navistar 141316H
GMC 2019573
Mack 35AX606
E-5960 1 Meritor 1246D290 5/8" 1" 9/16"
Meritor 1246V1166
GMC 2231319
Navistar 54700R1
Mack 63SP23
Ford B8QH1142A
E-10236 Meritor 1246L350 3/4" 1-1/8" 1/2"
4-41
DRIVE FLANGE NUTS
EUCLID NO. REPLACES THREAD HEX HEIGHT
E-5032 Trailmobile 22-T-1704 1/2"-20 3/4" 7/16"
Motor Wheel 86897
Fruehauf MRM-0T1704
Fruehauf MRM-T1704D
Meritor N18
Meritor N181
NWRA X-1122
4-42
SPOKE WHEEL & RIM STUDS
THREAD LENGTH
EUCLID NO. REPLACES A THREAD B C
E-4956A Dayton-Walther 08-008411 3" 3/4" - 10 1-1/16" 1-3/4"
Dayton-Walther 08-205349
Webb 171027
Erie 5259
Navistar 54494R1
Trailmobile 8-9-8
NWRA B-602
Meritor R004956APL
Goodyear ST-29
Gunite W855 4
Gunite WP147
Gunite WP855
E-5706 Dayton-Walther 08-204734 3-1/8" 3/4" - 10 1-1/16" 1-7/8"
Dayton-Walther 08-205349
NWRA B-612
NWRA B614
Paccar SVVN606
Gunite WP-202
Gunite WP202
E-5726 Goodyear ST-178 3-1/4" 5/8" - 11 7/8" 1-7/8"
NWRA X2105
E-5727 Goodyear ST-1298 3-1/2" 5/8" - 11 7/8" 1-7/8"
NWRA X1729
E-4957 Dayton-Walther 08-034396 3-9/16" 3/4" - 10 1-5/8" 1-5/8"
Dayton-Walther 08-203580
Trailmobile 8-9-18
NWRA B-605
E-5728 Goodyear ST-770 3-5/8" 3/4" - 10 1-1/16" 2-3/8"
NWRA X1730
E-5729 Goodyear ST-570 4" 3/4" - 10 1-1/16" 2-3/4"
NWRA X2106
B C
EUCLID NO. REPLACES A THREAD LENGTH THREAD LENGTH
E-5887 Mack 18AX340 2-1/2" 9/16"-12 7/8" 9/16"-18 13/16"
Gunite WP83
4-43
SPOKE WHEEL & RIM BOLTS
APPLICATION & GENERAL
EUCLID NO. REPLACES THREAD LENGTH INFORMATION
E-4989 Erie 5095 5/8"-11 2" Use with E-4962 Nut.
Erie 5095R Grade 8.
Navistar 68333H
Mack 6AX460
Trailmobile 8-9-2
NWRA B610
E-5012 Navistar 75887H 5/8"-11 2" Clipped head, round body.
NWRA N3324 Use with E-4962 Nut.
Grade 8.
RIM CLAMPS
EUCLID
NO. REPLACES A B C D
E-5036 Navistar 239406R1 5/8" 2" 2-3/8" 5/8"
Volvo White GMC 852957
Ford 8EQ1042
NWRA C-181
Gunite WP-80
E-5927 Dayton-Walther 09-007587 1/2" 2" 2" 5/8"
Dayton-Walther 09-839910
Navistar 215664R1
Navistar 215664R2
Volvo White GMC 499716
NWRA W-83
NWRA W-84
E-5926 Dayton-Walther 09-885310 1/2" 2" 2" 3/4"
NWRA W-85
4-44
RIM CLAMPS
EUCLID
NO. REPLACES A B C D
E-5746 Dayton-Walther 09-008422 1/4" 3-1/8" 2-5/8" 5/8"
Mack 12AK2189
Navistar 189446R1
Fruehauf 507305
NWRA W-86
EUCLID
NO. REPLACES A B C D
E-5838 Dayton-Walther 09-007295 3/16" 2-1/2" 2-5/8" 3/4" 4
Mack 15QJ210
Erie E-4
EUCLID SPACER
NO. REPLACES A B C D WIDTH
E-5570 Dayton-Walther 09-541417 1" 2-7/8" 2-1/2" 5/8" 4"
Webb 15414
GMC 2398446
Trailmobile 8-8-3
Navistar 92134H
Volvo White GMC A33768X
Erie E4
NWRA W-90
E-5571A Dayton-Walther 09-612317 1-1/8" 2-7/8" 2-1/2" 3/4" 4"
Mack 15QJ154A
Webb 16123
Meritor 3280K7863
Volvo White GMC 426957
Navistar 54493R2
GMC 5667139
Trailmobile 8-8-6
Navistar 973230R1
Erie B
Ford D8HT1043AA
Erie E1
Erie E19
Erie E20
NWRA XW96
E-5784A Dayton-Walther 09-870817 1-3/8" 2-7/8" 2-1/2" 3/4" 4"
Dayton-Walther 09-890817
Webb 16126
Navistar 988339R1
Erie E12
Erie E22
NWRA XW103
E-5045 Dayton-Walther 09-658417 1-7/16" 2-13/16" 2-15/32" 5/8" 3-5/8"
Mack 15QJ118P3
Volvo White GMC 466121A
GMC 5767139
Navistar 92135H
Erie E5
NWRA W-93
4-45
RIM CLAMPS
EUCLID SPACER
NO. REPLACES A B C D WIDTH
E-5040A Dayton-Walther 09-699317 1-1/2" 2-7/8" 2-1/2" 3/4" 3-5/8"
Webb 16124
Webb 16129
Volvo White GMC 451061A
GMC 576140
GMC 5767140
Trailmobile 8-8-20
Erie E21
Erie E3
NWRA W-98
E-5044 Dayton-Walther 09-604017 1-5/8" 2-3/4" 2-1/2" 5/8" 3-3/8"
Mack 15QJ118P2
GMC 2398447
Fruehauf 535406
Trailmobile 8-8-8
Erie E9
NWRA W-91
E-5055 Mack 15QJ223AP 1-3/4" 2-5/8" 2-15/32" 3/4" 3-5/8"
E-5572A Dayton-Walther 09-623517 1-3/4" 2-7/8" 2-1/2" 3/4" 3-3/8"
GMC 2393267
Volvo White GMC 448888A
Fruehauf 535414
Trailmobile 8-8-17
Erie E2
NWRA W-97
E-5785A Dayton-Walther 09-705317 1-7/8" 2-7/8" 2-13/32" 3/4" 3-3/8"
Dayton-Walther 09-870917
NWRA W-99
E-5839 Dayton-Walther 09-604317 2" 2-7/8" 2-13/32" 5/8" 3"
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5827 Dayton-Walther 09-006256 1-1/8" 6" 2-7/16" 3/4"
Mack 15QJ16
NWRA W-112
E-5883 Mack 15QJ16P3 1-5/16" 6" 2-1/2" 3/4"
E-5829 Dayton-Walther 09-006302 1-7/16" 6-5/8" 2-7/16" 3/4" 4"
NWRA W-114
E-5828 Dayton-Walther 09-006257 1-13/16" 6" 2-7/16" 3/4" 3-3/8"
Mack 15QJ17P1
Mack 15QJ17P3
NWRA W-113
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5573 Mack 15QJ121 1-1/8" 3-1/2" 2-1/4" 5/8" 4"
Mack 15QJ21
Erie K
NWRA XW55K
E-5035 Navistar 66091R1 1-5/16" 2-1/2" 2..56" 5/8" 4-1/4"
Erie E8
NWRA W-164
NWRA XW164
4-46
RIM CLAMPS
EUCLID NO. REPLACES A B C D
E-5747 GMC 3778640 1-1/16" 2-3/8" 1-3/4" 3/4"
Erie E7
NWRA W-227
Gunite WP-267
NWRA XW227
E-5755 Navistar 868368R1 1-5/16" 2-1/4" 1-13/16" 3/4"
Navistar 86836R1
NWRA W-228
Gunite WP368
NWRA XW228
E-5753 GMC 2377906 1-7/16" 2-3/8" 1-13/16" 3/4" 4
Gunite WP-344
NWRA XW191
E-5837 Navistar 578997C1 1-13/16" 2-1/4" 1-13/16" 3/4"
NWRA W-240
Gunite WP-398
RIM
EUCLID NO. REPLACES A B C D WIDTH
E-5902 Dayton-Walther 09-001275 1/2" 2-1/2" 3-5/8" 3/4" 8"
Meritor 2257Y1013
Navistar 472277C1
NWRA W-243
Gunite WP-722
4-47
RIM CLAMPS
EUCLID NO. REPLACES A B C D
E-9023 Gunite WP725 5/8" 2-1/2" 3-5/8" 3/4"
NWRA XW244
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5905A 1 Navistar 403961C1 1-3/16" 2-7/8" 2-3/8" 3/4" 4"
Ford D8HZ1403B
Gunite W-1110
NWRA W-241
Gunite W-858
E-5904A 1 Gunite W-1138 1-3/8" 2-7/8" 2-3/8" 3/4" 4"
NWRA W-242
Gunite W-846
NWRA XW255
E-5906 NWRA W-239 1-5/8" 2-1/4" 2-1/4" 3/4" 3-5/8"
Gunite W-866
NWRA XW239
1 Casting
4-48
RIM CLAMPS
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5778 NWRA W-194 1-5/16" 2-5/8" 2-3/16" 3/4" 4"
Gunite WP383
E-5782 NWRA W-195 1-3/4" 2-5/8" 2-3/16" 3/4" 3-5/8"
Gunite WP384
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5041 Ford B7Q1043A 1-9/16" 2-29/32" 2-7/16" 5/8" 3-5/8"
4
NWRA W-185
Gunite WP166
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5840 Trailmobile 8-8-18 1-1/16" 2-13/16" 2-7/16" 3/4"
Navistar 973230R1
E-5047 Dayton-Walther 09-717510 1-1/16" 3" 2-13/32" 5/8" 4"
Navistar 171194R5
Trailmobile 8-8-12
Erie E10
NWRA XW94
4-49
RIM CLAMPS
SPACER
EUCLID NO. REPLACES A B C D WIDTH
E-5046 Dayton-Walther 09-717110 1-1/16" 3" 2-13/32" 3/4" 4"
Trailmobile 8-8-18
Erie E6
NWRA W-100
NWRA XW100
WHEEL
EUCLID NO. REPLACES A B C D SIZE
E-5825 Webb 3322 1-1/16" 12-5/16" 2-5/16" 3/4" 22"
NWRA W-74
NWRA XW74
E-5824 Webb 3320 1-1/8" 10-5/8" 2-1/2" 3/4" 20"
NWRA W-72
NWRA XW72
E-5953 Webb 3314 1-1/4" 7-3/4" 1-13/16" 3/4" 15"
NWRA W-68
NWRA XW68
E-5973 World Truck 1109005 1-15/16" 7-11/16" 1-55/64" 3/4" 15"
NWRA W-69
4-50
SPOKE WHEEL SERVICE INFORMATION
HEEL-LESS CLAMP Heel-less clamps do not HEEL TYPE CLAMP Gap permissible but not
depend on a fulcrum at required — if gap
the bottom of the clamp exceeds 1/4" or if clamp
to produce the force to bottoms out before
wedge the rims. reaching 80% of recom-
mended torque, check to
Heel of clamp does not insure that proper
touch wheel here. clamps and spacer are
being used.
4
MOUNTING INSTRUCTIONS
1. Position all Rim Clamps in place, then install the Rim Clamp Nuts finger tight. If Ball Faced Nuts are
required by clamp design, be sure they are placed with the ball side to the Clamp.
3. Tighten Nuts to Wheel Manufacturer's Specifications in the Sequence shown. Tighten Nuts a quarter
turn at a time.
TORQUE CHART
NUT THREAD TORQUE LEVEL
Information courtesy of TMC (The Maintenance Council of The American Trucking Association). For complete wheel service
guidelines see TMC RP-222, "User's Guide to Wheels and Rims".
4-51
DISC WHEEL SERVICE INFORMATION
INSTALLATION TIPS
1. Never mix hub-piloted and stud-piloted wheels, hubs and nuts. The result could be loss of torque, a cracked wheel or
possible wheel loss.
2. For nuts used on hub-piloted wheels, apply two drops of oil to a point between the nuts and flanges and two drops to the
last 2 or 3 threads at the end of each stud. Also, lightly lubricate the pilots on the hub to ease wheel installation and removal.
Do not get lubricant on the mounting face of the drum or wheel.
3. For nuts used on stud-piloted wheels, do not use lubrication. Never lubricate wheel or nut ball seats or mounting faces.
If lubrication is used, consult the wheel manufacturer for torque recommendations.
4. Install nuts using proper installation sequence as shown below. Snug up nuts to about 50 ft.lbs. torque. Do not tighten
fully until all have been seated; then torque to specs as shown below using the same installation sequence.
5. After a wheel assembly has been installed, recheck the torque level between 50 and 100 miles of operation and retighten
if necessary to the recommended torque using the proper sequence.
a. To check and retorque an inner cap nut, it is necessary to loosen the outer cap nut first; then tighten the inner cap
nut. Outer cap nuts then must be retightened to the proper level.
b. It is recommended that a torque check be made as part of a vehicle's scheduled maintenance program or at 10,000
mile intervals, whichever comes first.
TORQUE CHART
MOUNTING TYPE NUT THREAD TORQUE LEVEL
Information courtesy of TMC (The Maintenance Council of The American Trucking Association). For complete wheel service
guidelines see TMC RP-222, "User's Guide to Wheels and Rims".
4-52
WHEEL HUB APPLICATION & STUD SELECTION CHART
EUCLID EUCLID EUCLID EUCLID
EUCLID O.E.M AXLE STUD EUCLID EUCLID INNER INNER OUTER OUTER
HUB HUB APPLICA- DISC WHEEL DRUM DRUM STUD STAND STUD STUD CAP NUT CAP NUT CAP NUT CAP NUT
NO. NO. TION TYPE MOUNT TYPE TYPE OUT R.H. L.H. R.H. L.H. R.H. L.H.
HUBS FOR STUD PILOTED WHEELS
Dual Steel Inboard Cast Shoulder 1.33 E-5561-R E-5561-L E-7895-R E-7895-L E-5977-R E-5977-L
E-2358* 1256 Trailer
Single Steel Inboard Cast Shoulder 1.64 E-5932-R E-5932-L — — E-5652-R E-5652-L
Inboard Cast or Fused Shoulder 1.33 E-5561-R E-5561-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Aluminum
Inboard Cast or Fused Shoulder 1.64 E-5932-R E-5932-L E-5988-R E-5988-L E-5977-R E-5977-L
E-2359* 1221 Trailer Dual Steel Inboard Cast or Fused Shoulder 1.33 E-5561-R E-5561-L E-7895-R E-7895-L E-5977-R E-5977-L
Single Steel Inboard Cast or Fused Shoulder 1.64 E-5932-R E-5932-L —- —- E-5652-R E-5652-L
or Aluminum Inboard Cast or Fused Shoulder 1.68 — — — — E-5977-R E-5977-L
Inboard Cast or Fused Shoulder 1.33 E-5561-R E-5561-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Aluminum
Inboard Cast or Fused Shoulder 1.64 E-5932-R E-5932-L E-5988-R E-5988-L E-5977-R E-5977-L
E-2360* 1001 Trailer Dual Steel
Single Steel
Inboard
Inboard
Cast or Fused
Cast or Fused
Shoulder
Shoulder
1.33
1.68
E-5561-R
—
E-5561-L
—
E-7895-R
—
E-7895-L
—
E-5977-R
E-5977-R
E-5977-L
E-5977-L 4
or Aluminum Inboard Cast or Fused Shoulder 1.64 E-5932-R E-5932-L — — E-5652-R E-5652-L
Dual Aluminum Inboard Cast or Fused Shoulder 1.34 E-5989-R E-5989-L E-5988-R E-5988-L E-5977-R E-5977-L
E-2453A* 1331 Trailer
Dual Steel Inboard Cast or Fused Shoulder 1.34 E-5989-R E-5989-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Steel Inboard Cast Shoulder 1.33 E-5561-R E-5561-L E-7895-R E-7895-L E-5977-R E-5977-L
E-2665* 1051 Trailer
Single Steel Inboard Cast Shoulder 1.64 E-5932-R E-5932-L — — E-5652-R E-5652-L
Outboard Cast Serrated 1.36 E-8947-R E-8947-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Fused Serrated 1.37 E-4968-R E-4968-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Aluminum
Outboard Fused Serrated 1.61 E-8947-R E-8947-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.84 E-9008-R E-9008-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.36 E-8947-R E-8947-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Steel
E-5107* 1020 Trailer Outboard Fused Serrated 1.37 E-4968-R E-4968-L E-7895-R E-7895-L E-5977-R E-5977-L
Single Steel — Less Drum Serrated 1.62 E-4968-R E-4968-L — — E-5652-R E-5652-L
Single Steel Outboard Cast Serrated 1.61 E-8947-R E-8947-L — — E-5652-R E-5652-L
or Aluminum Outboard Fused Serrated 1.84 E-9008-R E-9008-L — — E-5652-R E-5652-L
“Super” Single
Outboard Fused Serrated 2.09 E-9008-R E-9008-L — — E-5995-R E-5995-L
Aluminum
Dual Steel Inboard Cast Shoulder 1.33 E-5561-R E-5561-L E-7895-R E-7895-L E-5977-R E-5977-L
E-5108* 1056 Trailer
Single Steel Inboard Cast Shoulder 1.64 E-5932-R E-5932-L — — E-5652-R E-5652-L
Single Steel Outboard Cast Serrated 1.36 E-5986-R E-5986-L —- —- E-5977-R E-5977-L
E-5115* 1521 Steering Single Steel Outboard Cast Serrated 1.88 E-6033-R E-6033-L —- —- E-5977-R E-5977-L
or Aluminum
E-5116* 1530 Steering Single Steel Outboard Cast Serrated 1.88 E-6033-R E-6033-L —- —- E-5977-R E-5977-L
or Aluminum
E-5141* 1540 Trailer or Single Steel Outboard Cast Serrated 1.75 E-6033-R E-6033-L —- —- E-5977-R E-5977-L
Steering or Aluminum
Dual Aluminum Outboard Cast Serrated 1.36 E-8947-R E-8947-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.84 E-9008-R E-9008-L E-5988-R E-5988-L E-5977-R E-5977-L
E-5144* 1622 Drive Dual Steel Outboard Cast Serrated 1.36 E-8947-R E-8947-L E-7895-R E-7895-L E-5977-R E-5977-L
Single Steel Outboard Cast Serrated 1.84 E-9008-R E-9008-L —- —- E-5652-R E-5652-L
or Aluminum
HUBS FOR HUB PILOTED WHEELS
Dual 1 Steel/ Outboard Cast Serrated 3.53 E-11715 — — — E-6000A —
1 Aluminum Outboard X30/ Serrated 2.73 E-9837 — — — E-6000A —
CentriFuse
Dual Aluminum Outboard Cast Serrated 3.53 E-11715 — — — E-6000A —
Outboard X30/ Serrated 3.11 E-11705 — — — E-6000A —
CentriFuse
04-15541 2028 Trailer Dual Steel Outboard X30/ Serrated 2.34 E-11710 — — — E-6000A —
CentriFuse
Outboard Cast Serrated 2.48 E-9837 — — — E-6000A —
Single Aluminum Outboard Cast Serrated 2.48 E-9837 —- —- —- E-6000A —-
Single Steel Outboard Cast Serrated 2.09 E-11710 —- —- —- E-6000A —-
Single Steel Outboard X30/ Serrated 2.34 E-11710 —- —- —- E-6000A —-
or Aluminum CentriFuse
Dual 1 Steel/ Outboard Cast Serrated 3.50 E-6034 —- —- —- E-5991 —-
1 Aluminum Outboard Fused Serrated 2.90 E-6035 —- —- —- E-5991 —-
Dual Aluminum Outboard Cast Serrated 3.50 E-6034 —- —- —- E-5991 —-
Outboard Fused Serrated 3.28 —- —- —- —- E-5991 —-
Dual Steel Outboard Fused Serrated 2.90 E-6035 —- —- —- E-5991 —-
E-5119* 2328 Trailer Outboard Cast Serrated 2.65 E-6035 —- —- —- E-5991 —-
Single Aluminum Outboard Cast Serrated 2.65 E-6035 —- —- —- E-5991 —-
Single Steel Outboard Cast Serrated 2.21 E-6036 —- —- —- E-5991 —-
Single Steel Outboard Fused Serrated 2.46 E-6036 —- —- —- E-5991 —-
or Aluminum
4-53
WHEEL HUB APPLICATION & STUD SELECTION CHART
EUCLID EUCLID EUCLID EUCLID
EUCLID O.E.M AXLE STUD EUCLID EUCLID INNER INNER OUTER OUTER
HUB HUB APPLICA- DISC WHEEL DRUM DRUM STUD STAND STUD STUD CAP NUT CAP NUT CAP NUT CAP NUT
NO. NO. TION TYPE MOUNT TYPE TYPE OUT R.H. L.H. R.H. L.H. R.H. L.H.
UNIVERSAL HUBS FOR STUD PILOTED WHEELS
Dual Steel Outboard Cast Serrated 1.38 E-11672-R E-11672-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Cast Serrated 1.80 E-11677-R E-11677-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Steel Outboard X-30 / Serrated 1.38 E-11661-R E-11661-L E-7895-R E-7895-L E-5977-R E-5977-L
CentriFuse
Dual Aluminum Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L E-5988-R E-5988-L E-5977-R E-5977-L
04-15501 Trailer CentriFuse
04-15984 Single Steel Outboard Cast Serrated 1.80 E-11677-R E-11677-L — — E-5652-R E-5652-L
Single Aluminum Outboard Cast Serrated 1.80 E-11677-R E-11677-L — — E-5652-R E-5652-L
Single Steel Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L — — E-5652-R E-5652-L
CentriFuse
Single Aluminum Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L — — E-5652-R E-5652-L
CentriFuse
Super Single Al. Outboard X-30 / Serrated 2.05 E-11677-R E-11677-L — — E-5652-R E-5652-L
CentriFuse
Dual Steel Outboard Cast Serrated 1.38 E-11672-R E-11672-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Cast Serrated 1.80 E-11677-R E-11677-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Steel Outboard X-30 / Serrated 1.38 E-11661-R E-11661-L E-7895-R E-7895-L E-5977-R E-5977-L
CentriFuse
Dual Aluminum Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L E-5988-R E-5988-L E-5977-R E-5977-L
CentriFuse
04-15502 Trailer Single Steel Outboard Cast Serrated 1.80 E-11677-R E-11677-L — — E-5652-R E-5652-L
04-15675 Single Aluminum Outboard Cast Serrated 1.80 E-11677-R E-11677-L — — E-5652-R E-5652-L
Single Steel Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L — — E-5652-R E-5652-L
CentriFuse
Single Aluminum Outboard X-30 / Serrated 1.63 E-11676-R E-11676-L — — E-5652-R E-5652-L
CentriFuse
Super Single Al. Outboard X-30 / Serrated 2.05 E-11677-R E-11677-L — — E-5652-R E-5652-L
CentriFuse
Dual Steel Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.74 E-9524-R E-9524-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Steel Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-5988-R E-5988-L E-5977-R E-5977-L
E-9347* 2623 Drive Outboard Fused Serrated 1.63 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Single Steel Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Aluminum Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Steel Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-L
Single Aluminum Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-L
Super Single Al. Outboard Fused Serrated 1.99 E-9524-R E-9524-L — — E-5652-R E-5652-L
Dual Steel Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.74 E-9524-R E-9524-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Steel Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-5988-R E-5988-L E-5977-R E-5977-L
E-9348* 2023 Trailer Outboard Fused Serrated 1.63 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Single Steel Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Aluminum Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Steel Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-L
Single Aluminum Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-
Super Single Al. Outboard Fused Serrated 1.99 E-9524-R E-9524-L — — E-5652-R E-5652-L
Dual Steel Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Cast Serrated 1.38 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Outboard Cast Serrated 1.74 E-9524-R E-9524-L E-5988-R E-5988-L E-5977-R E-5977-L
Dual Steel Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-7895-R E-7895-L E-5977-R E-5977-L
Dual Aluminum Outboard Fused Serrated 1.38 E-9523-R E-9523-L E-5988-R E-5988-L E-5977-R E-5977-L
E-9349* 2323 Trailer Outboard Fused Serrated 1.63 E-9010-R E-9010-L E-5988-R E-5988-L E-5977-R E-5977-L
Single Steel Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Aluminum Outboard Cast Serrated 1.74 E-9524-R E-9524-L — — E-5652-R E-5652-L
Single Steel Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-L
Single Aluminum Outboard Fused Serrated 1.63 E-9010-R E-9010-L — — E-5652-R E-5652-L
Super Single Al. Outboard Fused Serrated 1.99 E-9524-R E-9524-L — — E-5652-R E-5652-L
4-56
TRAILER AXLE SPINDLE HARDWARE
EATON & FRUEHAUF AXLES
WASHERS PIN
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICK O.D. I.D. DIA. LENGTH
E-2306 Cotter Pin Fruehauf 103426 1/4" 3"
Dana/Spicer 12-406
E-620 Axle Spindle Fruehauf 530085 1/4" 3" 1-1/2" x
Washer 1-3/8"
"D"
Hole
EATON, MERITOR, SPICER & STD. FORGE 13,000 & 14,000 LB. AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-617 Axle Spindle Meritor 1229G709 1/16" 3" 1-3/4" x
Lock Washer Trailmobile 6-5-1 1-5/8"
Dana/Spicer M10HN105 "D" Hole
E-619 Axle Thrust Meritor 1229F708 1/8" 3" 1-3/4" x
Washer Trailmobile 6-6-6 1-5/8"
Dana/Spicer M10HN104 "D" Hole
4-57
TRAILER AXLE SPINDLE HARDWARE
MERITOR RL, RN, RQ, TK, TKL, TKN AXLES - "POSITIVE" ADJUSTMENT
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-3010 Axle Spindle 1/16" 4" 2-13/32"
Lock Washer
1 Used in place of E-1253 to convert to "manual" adjustment. 2 Includes E-10793 set screw.
4-58
TRAILER AXLE SPINDLE HARDWARE
MERITOR TN, TQ AXLES - "POSITIVE" ADJUSTMENT
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-7663 Axle Spindle Meritor A1229X2546 15/64" 3-7/8" 2-25/64"
Lock Washer
1 Used in place of E-1253 to convert to "manual" adjustment. 2 Includes E-10793 set screw.
5 Use in place of E-7659 to convert to manual adjustment.
4-59
TRAILER AXLE SPINDLE HARDWARE
MERITOR TP AXLE - "POSITIVE" ADJUSTMENT
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-7660 2 Axle Spindle Meritor 1229S4179 15/64" 4-3/4" 3-5/16"
Lock Washer
MERITOR TR AXLE
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-7660 2 Axle Spindle Meritor 1229S4179 15/64" 4-3/4" 3-5/16"
Lock Washer
4-60
TRAILER AXLE SPINDLE HARDWARE
MERITOR, EATON, KERSHAW & STD. FORGE 17,000 & 18,000 LB. TRADE AXLES
WASHERS
ACROSS THREAD TAB
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICK O.D. I.D. LENGTH
E-3009 Axle Spindle 1/16" 4-1/32" 2-41/64" 3/32"
Lock Washer
E-2237 Axle Spindle Eaton 4-2197 1/16" 4-1/32" 2-41/64" 5/32"
Lock Washer Eaton 42197
Dana/Spicer M10HN151
E-573 3 Axle Spindle Dana/Spicer 10287 1/4" 3-15/16" 2-41/64"
Lock Washer Meritor 1229V1660
Meritor 1229W2545 4
Eaton 4-2195
Trailmobile 700-7-12
Ford 7EQ1124
Ford 7EQ1124A
Eaton 820396
Hendrickson Turner A-1987
Meritor A1229W2545
Dana/Spicer M10HN100
E-572 Outer Axle Dana/Spicer 10286 3-1/4" 2-5/8"-16 3/8"
Spindle Nut Dana/Spicer 10408
Meritor 1227B756
Eaton 4-2194
Trailmobile 700-7-13
Eaton 820395
Dana/Spicer M10HN102
E-540 Inner Axle Dana/Spicer 10284 3-13/16" 2-5/8"-16 3/8"
Spindle Nut Meritor 1227C549
GMC 2408341
Eaton 4-2196
Trailmobile 700-7-11
Eaton 820394
Navistar 870813R1
Dana/Spicer M10HN101
4-61
TRAILER AXLE SPINDLE HARDWARE
SPICER D21 & D22 AND STD. FORGE A25 & A26 AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICK O.D. I.D.
E-2237 Axle Spindle Eaton 4-2197 1/16" 4-1/32" 2-41/64"
Lock Washer Eaton 42197
Dana/Spicer M10HN151
E-573 3 Axle Spindle Dana/Spicer 10287 1/4" 3-15/16" 2-41/64"
Lock Washer Meritor 1229V1660
Meritor 1229W2545
Eaton 4-2195
Trailmobile 700-7-12
Ford 7EQ1124
Ford 7EQ1124A
Eaton 820396
Hendrickson Turner A-1987
Meritor A1229W2545
Dana/Spicer M10HN100
E-572 Outer Axle Dana/Spicer 10286 3-1/4" 2-5/8"-16 3/8"
Spindle Nut Dana/Spicer 10408
Meritor 1227B756
Eaton 4-2194
Trailmobile 700-7-13
Eaton 820395
Dana/Spicer M10HN102
E-540 Inner Axle Dana/Spicer 10284 3-13/16" 2-5/8"-16 3/8"
Spindle Nut Meritor 1227C549
GMC 2408341
Eaton 4-2196
Trailmobile 700-7-11
Eaton 820394
Navistar 870813R1
Dana/Spicer M10HN101
4-62
STEERING AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
CHEVROLET & GMC F070
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4854 Axle Spindle GMC 3762598 1-5/8" 1-1/8"-16 3/4"
Nut
4-63
STEERING AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
NAVISTAR 02109 (DANA FA109) 9,000 LBS.
NAVISTAR 02139 (DANA FA139) 12,000 LBS.
NAVISTAR 02309 (DANA I-90) 9,000 LBS.
NAVISTAR 02329 (DANA I-108) 10,800 LBS.
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4871 Lock Washer Trailmobile 38-4871 3/32" 3-7/16" 2-3/32"
Navistar 470421-C1
NAVISTAR FA48
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4875 Thrust Washer Navistar 97788-H 13/64" 2-1/8" 1"
4-64
STEERING AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
NAVISTAR FA68, FA72
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4851 Axle Spindle Navistar 27197-H 1-1/2" 1"-14 7/8"
Nut
4-65
STEERING AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MERITOR FE-970 AND "E" SERIES DRIVE AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2301 Axle Spindle Meritor 1229S721 1/16" 3-5/16" 2-1/4"
Lock Washer Trailmobile 21-L1336
Eaton 4-2210
E-2302 Thrust Washer Meritor 1229H1568 1/4" 4-5/16" 2-1/4"
Eaton 4-2211
4-66
STEERING AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MERITOR 16,000 LB. AXLE (Continued)
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2661 Inner Nut Meritor A1227A391 1-3/4"-12 1/2" 4-3/16"
4-67
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
EATON 32M-MR, -34M, -MF, 34D-DT-RT, 17800-17801 SERIES AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2461 Lock Washer Trailmobile 21-L1360 1/8" 4" 2-5/8"
Eaton 30714
Eaton 4-2228
Ford EQH1124
E-2460 Drive Axle Eaton 34090 3-3/8" 2-5/8"-12 1"
Spindle Nut Eaton 4-2229
Navistar 67675R92
4-68
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
FORD 15,000 LB. REAR AXLE
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4878 Lock Washer Ford B6Y1124A 1/16" 3" 2"
4-69
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MACK 50,000 LB.
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2304 Axle Spindle Lock Eaton 119882 3/16" 4-3/8" 3-1/4"
Washer Meritor 1229U1009
Mack 23QJ-201
Eaton 4-2224
E-2305 Outer Axle Eaton 119881 4" 3-1/4"-12 3/8"
Spindle Nut Meritor 1227R330
Mack 25QJ-36
Eaton 4-2223
4-70
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MACK SW-56C SERIES AXLE
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-3505 Axle Spindle Lock Mack 23QJ129 5/32" 4-7/16" 2-57/64"
Washer Mack 25QJ125
4-71
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
NAVISTAR 14044 (INTERNATIONAL/DANA J190S) 19,000 LBS.
NAVISTAR 14186 (EATON 17202/22) 19,000 LBS.
NAVISTAR 14351 (INTERNATIONAL/DANA G340S) 34,000 LBS.
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-4877 Lock Washer Navistar 470422-C1 1/8" 4-1/16" 2-5/8"
4-72
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MERITOR "F" SERIES AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2418 Axle Spindle Lock Meritor 1229C1459 5/32" 3-3/4" 2-1/2"
Washer
4-73
DRIVE AXLE SPINDLE HARDWARE
For Light, Medium, and Heavy-Duty Trucks
MERITOR "L" SERIES AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2424 Axle Spindle Lock Meritor 1229R1058 3/16" 4-1/4" 3"
Washer Eaton 4-2221
MERITOR "Q" & "R" SERIES AXLES FOR SQHD & R170 DRIVE AXLES
WASHERS
ACROSS THREAD
EUCLID NO. DESCRIPTION REPLACES FLATS SIZE THICKNESS O.D. I.D.
E-2304 Axle Spindle Lock Eaton 119882 3/16" 4-3/8" 3-1/4"
Washer Meritor 1229U1009
Mack 23QJ-201
Eaton 4-2224
E-2305 Outer Axle Eaton 119881 4" 3-1/4"-12 3/8"
Spindle Nut Meritor 1227R330
Mack 25QJ-36
Eaton 4-2223
4-74
ASSORTMENTS & DISPLAY BOARDS
SPINDLE NUT ASSORTMENT
EUCLID E-7647
SPINDLE NUTS
WITH FREE DISPLAY BOARD
Features Euclid's most popular Spindle Nuts for
medium and heavy-duty trucks
Included with Display Board are two each of:
EUCLID EUCLID EUCLID
DESC. DESC. DESC.
NO. NO. NO.
E-540
E-572
Inner Nut
Outer Nut
E-2303
E-2305
Inner Nut
Outer Nut
E-2462
E-2465
Outer Nut
Outer Nut
4
E-618 Nut E-2417 Inner Nut E-2468 Outer Nut
E-1087 Nut E-2419 Outer Nut E-2550 Nut
E-1251 Outer Nut E-2420 Inner Nut E-3504 Inner Nut
E-2128 Service Nut E-2422 Outer Nut E-3506 Outer Nut
E-2296 Outer Nut E-2423 Inner Nut
Board Size: 24" Wide x 28 1/2" High E-2299 Inner Nut E-2425 Outer Nut
EUCLID E-7657
4-75
WHEEL HUB CAPS
GREASE HUB CAP
BOLT NO. OF
EUCLID CIRCLE BOLT BOLT
NO. REPLACES DIA. O.D. I.D. HOLE DIA. HOLES COMMENTS
E-975 Trailmobile 19143 5-1/2" 6-1/8" 4-1/2" 5/16" 6 Use with E-03009
Meritor 3262S45 Gasket
Meritor 3262W1245
4-76
WHEEL HUB CAPS
HUB CAP O-RING
E-04000V Vented Hub Cap Filler Plug For use with non-Fruehauf/Pro-Par axles.
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
4-77
EUCLID DRIVE AXLE GASKET ASSORTMENT
EUCLID E-7655
DRIVE AXLE GASKETS
WITH FREE DISPLAY BOARD
E-2340 E-2434
E-2341 E-2435
E-2431 E-2436
E-2432 E-2437
E-2433 E-2438
4-78
INDEX
5-ii
AIR BRAKE SERVICE TOOLS
UNIVERSAL BRAKE SHOE GAUGE
5-1
AIR BRAKE SERVICE TOOLS
HEAVY-DUTY BRAKE DRUM GAUGE KIT
EUCLID NO. DESCRIPTION APPLICATION INFORMATION
E-9136 Heavy-Duty Brake Drum To quickly and easily measure scored, worn or
Gauge Kit heat-checked brake drums. Includes: Heavy-
Duty Brake Drum Gauge, Gauge Calibration
Tool, Euclid red hard plastic shell with padded
interior to protect the Brake Drum Gauge.
E-9320 Automatic 1. Remove the grease fittings from the slack adjuster.
2. Slide the puller onto the slack adjuster body.
3. Turn the bolt on the puller. The bolt is self-aligning for quick
positioning.
4. Catch the slack adjuster as it comes off the camshaft.
5-2
AIR BRAKE SERVICE TOOLS
BRAKE SPIDER ALIGNMENT TOOL ADAPTER
EUCLID NO. APPLICATION INFORMATION
E-3865 Install over Front Axle Spindles to use E-3864 Brake Spider
Alignment Tool.
NOTE: The shoe return spring is hooked on the backside of the shoe web. Be careful not to damage the manual
adjustment wheel or the rubber dust boot.
5-3
HYDRAULIC BRAKE SERVICE TOOLS
PRESSURE BLEEDER TANK
EUCLID
NO. INCLUDES APPLICATION & GENERAL INFORMATION
E-8573 1 Quick Disconnect Male Fitting Bleeds: Clutch Systems - Tandem Safety
1 Ball Point Filler Master Cylinders - Dual Clutch and Brake
1 Bleeder Hose Cylinders - Power Brake Systems - Any Master
1 Adapter for Passenger Car/Light Trucks with Cylinder (With or Without a Check Valve)
Open Tank Tandems
1 Adapter for Round Open Tanks and Plastic
Reservoirs with Screw-Caps
Need assistance?
Let Euclid's Special Order Service ( S.O.S .) help you find your parts.
Euclid's position as the market leader provides you access to a comprehensive array of
truck parts products from the industry's leading manufacturers. Through Euclid, these
entire product lines are available to you just by placing a phone call to Euclid's S.O.S.
Department at 866-238-2543 (option 2) in the U.S. or 800-387-3889 in Canada.
5-4
TRUCK WHEEL BEARING LOCK-NUT WRENCH
ASSORTMENTS
EUCLID E-7651
WHEEL BEARING LOCK-NUT WRENCHES
WITH FREE DISPLAY BOARD
EUCLID E-7653
WHEEL BEARING LOCK-NUT WRENCHES
WITH FREE DISPLAY BOARD
1 Fits special "rounded" hex nuts found on Dana axles of some Ford Trucks. 2 Tubular spanner wrenches.
5-5
WHEEL BEARING LOCK-NUT WRENCHES
Euclid wrenches have a 3/4" drive
square opening for use with an extension LISTED BY OPENING SIZE
and torque wrench to tighten the Lock-Nut EUCLID OPENING EUCLID OPENING
as required. A longer extension can be NO. SIZE NO. SIZE
used for wide rims. Wrenches are made E-1901 2-3/32" (6 pt.) E-1909 3-1/4" (8 pt.)
of high strength and heavy-duty gauge E-1920 2-1/4" (6 pt.) E-1924 3-3/8" (8 pt.)
steel…Resists rounding out. E-1902 2-3/8" (6 pt.) E-1910 3-1/2" (6 pt.)
E-1936 (1) 2-3/8" (6 pt.) E-1911 3-1/2" (8 pt.)
E-1903 2-3/8" (8 pt.) E-1926 3-3/4" (6 pt.)
E-1921 2-1/2" (6 pt.) E-1925 3-3/4" (8 pt.)
E-1904 2-9/16" (6 pt.) E-1927 3-13/16" (8 pt.)
E-1928 (1) 2-9/16" (6 pt.) E-1912 3-7/8" (6 pt.)
E-1905 2-9/16" (8 pt.) E-1913 3-7/8" (8 pt.)
E-1922 2-5/8" (6 pt.) E-1914 4" (6 pt.)
E-1923 2-3/4" (6 pt.) E-1915 4-1/8" (6 pt.)
E-1937 2-3/4" (8 pt.) E-3372 4-1/8" (8 pt.)
E-1932 2-7/8" (6 pt.) E-1916 4-3/8" (6 pt.)
E-1933 2-7/8" (8 pt.) E-1917 4-3/8" (8 pt.)
E-1906 3" (6 pt.) E-6137 4-1/2" (8 pt.)
E-1907 3" (8 pt.) E-1597A 4-13/16" (8 pt.)
E-1934 3-1/8" (6 pt.) E-1918 4-7/8" (6 pt.)
E-1935 3-1/8" (8 pt.) E-1919 4-7/8" (8 pt.)
E-1908 3-1/4" (6 pt.) E-3371 5-1/4" (6 pt.)
(1) Fits special "rounded" hex nuts found on Dana axles of
some Ford trucks.
5-6
WHEEL BEARING LOCK-NUT WRENCHES
EUCLID E-2644
Restores threads to their original condition. Eliminates the need for
expensive thread cutting equipment. OPERATION: Tighten the tool
slightly on the good threads, then back off over the damaged thread
area to restore the threads. The aluminum alloy V Pad will not
damage the threads. Capacity from 1-1/4" to 5" O.D.
EUCLID E-9436
5-7
WHEEL SERVICE TOOLS
FOR USE WITH 1" DRIVE AIR IMPACT WRENCH ONLY
MAXIMUM
EUCLID NO. COLOR SOCKET SIZE TORQUE LIMIT
E-3910 BLACK 1-1/2" Hex 475 ft. lbs.
NOTE: Will work for both left and right hand thread.
5-8
WHEEL SERVICE TOOLS
AXLE STUD CONE PLIER
E-5854 Hex Handle for 3/4" Hex x 22" Long fits all of the above
Wrenches wrenches., 3/4" hex x 22" long. Fits all of
the above wrenches.
E-5855 Disc Outer Nut Wrench 1-1/2" Hex - Holds outer nut while turning
inner nut.
E-5856 Dayton - Guinite - Erie - 1-1/16" and 1-1/4" Hex for 5/8"-11 and
Webb Spoke Wheels 3/4"-10 Nuts.
5-9
SPECIAL TOOLS
GEAR TYPE POWER DRIVE WRENCH FOR USE ON ALL TRUCK AND ROAD EQUIPMENT
3 to 1 POWER RATIO
For Budd inner & outer nuts and other type
wheel nuts, u-bolts, head bolts, etc.
ADAPTER
EUCLID E-5859 1-1/2" hex to 13/16" square
for Budd inner nuts
5-10
BROKEN CAP NUT & STUD REMOVAL TOOL KIT
ECONOMICAL VALUE
Eliminates the need to buy an entire new tool when teeth wear.
Replace ONLY the rib nut at a fraction of the cost of other
removal tools.
EUCLID
NO. DESCRIPTION INCLUDES
E-5205 Broken Stud 1 E-5206 1-1/8" Rib Nut
and Cap Nut 1 E-5207 3/4" Rib Nut
Removal Kit 1 E-5208 5/8" Rib Nut
5
1 Drive-On Tool
EUCLID
NO. DESCRIPTION APPLICATION
E-5206 1-1/8" Replacement For removing broken 1-1/8"
Rib Nut Inner Cap Nuts
E-5207 3/4" Replacement For removing broken 3/4"
Rib Nut Wheel Studs
E-5208 5/8" Replacement For removing broken 5/8"
Rib Nut Wheel Studs
WARRANTY
The teeth of the rib nuts will wear out after limited use. Therefore, rib nuts are not covered uner Euclid's Warranty Policy.
5-11
SUSPENSION SERVICE TOOLS
Tool automatically centers bushing for perfect alignment and ease of installation.
Use to uninstall E-1999A, E-3394A, and E-4827 Bushings.
EUCLID E-1600
For Hutchens
Torque Arms
Use to install E-934
Bushing in original
equipment Hutchens
Torque Arms
EUCLID E-2644
Restores threads to their original condition. Eliminates the need for
expensive thread cutting equipment. OPERATION: Tighten the tool
slightly on the good threads, then back off over the damaged thread
area to restore the threads. The aluminum alloy V Pad will not
damage the threads. Capacity from 1-1/4" to 5" O.D.
5-12
FRONT END SERVICE TOOLS
EUCLID
NO. DESCRIPTION APPLICATION
E-2654 Ball Joint and Anchor A heavy-duty press that easily removes rusted and
Pin Press corroded brake shoe anchor pins without damage to the
brake shoe spider. Removes pins up to 1-1/4"
diameter. Use with E-6064 set to remove or install Ball
Joints. Also used to remove Brake Shoe Anchor Pins
and U-Joints.
E-6064 Ball Joint Service Set Includes: 3" x 3-3/4" I.D. Receiver Tube; 2-1/2" O.D. x
2-1/4" I.D. Receiver Tube; 2" O.D. x 1-3/4" I.D.
Receiver Tube; Installation Adapter; Removal Adapter.
Requires use of an E-2654 Ball Joint Press.
E-6065 Ball Joint Spanner For removal and installation of Ball Joint Adjusting
Wrench Sleeves on 1/2, 3/4 and 1-Ton Dana open yoke front 5
axles used on Ford, GMC, Navistar and Jeep 4WD
vehicles. Allows torquing with 1" socket for proper upper
Ball Joint preload.
E-6066 Ball Joint Separator Ball Joint Separator is designed solely to remove Ball
Joints from spindle support arms without damaging
other components.
E-6067 Multi-Purpose Separator This tool can be used to remove camber adjustment
sleeves on Ford 4 x 2 and 4 x 4 light trucks where the
camber is adjustable. It can also be used as a Pitman
Arm wedge for Light-Duty Trucks as well as a Tie Rod
Separator for Medium and Heavy-Duty Trucks.
E-6068 Pitman Arm Puller Pitman Arm Pullers are designed to handle the toughest
Pitman Arm pulling job. Pullers are adjustable and have
special forged jaws shaped to fit the job. "Pullers have
two clamp bolts that lock jaws on the Pitman Arm for
pulling, assuring positive grip and leaving hands free
for the pulling job." Light-Duty Trucks - 1 Ton only
E-6069 Pitman Arm Puller Pitman Arm Pullers are designed to handle the toughest
Pitman Arm pulling job. Pullers are adjustable and have
special forged jaws shaped to fit the job. "Pullers have
two clamp bolts that lock jaws on the Pitman Arm for
pulling, assuring positive grip and leaving hands free for
the pulling job." Light-Duty Trucks to 3/4 Ton
5-13
FRONT END SERVICE TOOLS
EUCLID
NO. DESCRIPTION APPLICATION
E-6070 Pitman Arm Wedge Removes Pitman Arms on Light-Duty Trucks.
Wedge end is placed between parts and a few hammer
blows separate them.
E-6071 Shock Absorber Link Separates Shock Absorber Links and Tie Rod Ends.
and Tie Rod End
Separator
E-6072 Tie Rod Adjusting Tool For Light-Duty Trucks with 1-1/8" diameter adjusting
sleeves. Allows 360 degree rotation of the adjusting
sleeve where space is limited. 1/2" square drive for
ratchet or breaker bar.
E-6073 Control Arm Bushing Removes worn Upper Control Arm Bushings and installs
Service Set new ones without damage to the control arm. Includes
C-Frame Press and all adaptors and inserts necessary
to do the job correctly.
E-6074 Dial Indicator Set Use to gauge suspension looseness. Has a 2-1/4"
diameter dial face graduated to .001 inch, a flexible arm
to get at hard-to-reach areas and an on/off magnetic
base.
5-14
MISCELLANEOUS SERVICE TOOLS
WHEEL BEARING ENDPLAY GAUGE
EUCLID NO. APPLICATION
E-9793 Quick and Accurate:
1. Remove magnet keepers and attach to face of
trailer hub with indicator contacting end of the
spindle.
2. Zero dial by rotating the dial face.
3. Rock the hub and drum to determine bearing
endplay.
4. Adjust bearing endplay and recheck.
U-JOINT PULLER
EUCLID NO. APPLICATION
E-6039 Works on most Dana Spicer and Meritor U-joints. Designed for use with a 1/2" air impact
wrench. Can be used at different angles and in tight places. Holes in the puller legs store
bolts. 5
Bolts included are: (2) 5/16"-24 x 1-1/2"; (2) 3/8"-24 x 1-1/2"; (2) 7/16 in-20 x 1-1/2";
(2) M8 x 1.25mm x 35mm
5-15
MISCELLANEOUS SERVICE TOOLS
CLUTCH HANDLER
LIFTING
EUCLID NO. RANGE CLUTCH SIZE APPLICATION
E-9434 9" to 37" 15-1/2" Allows one person to easily remove, transport and
replace clutch disc plate or flywheel (with attachment).
Parallel lift path allows precise alignment, 4 swivel
casters and 2" spline shaft aid alignment. Integral
hydraulic jacking mechanism. Use of E-9435 flywheel
attachment permits removal of flywheels (including pot
type). Replaces OTC No. 5015
XpresswayPlus.com
5-16
TECHNICAL VIDEO LIBRARY
A-601S Spanish
A-602 Air Ride Suspension Video Decal English --- A pressure sensitive decal featuring a check list of the most
important points of maintaining Air Ride Suspensions.
A-602F French
A-602S Spanish
VIDEO-1 Air Foundation Brakes: The Hidden English 15 Minutes Troubleshooting heavy-duty truck foundatin air brakes.
Challenge Topics include: brake lining wear patterns, drums, shoes,
VIDEO-1F French camshafts, and foundation air brake hardware.
VIDEO-1S Spanish
VIDEO-2F Air Ride Suspensions: On the Level French 18 Minutes Troubleshooting heavy-duty air ride suspensions. Topics
include: air spring wear patterns and replacement, shock
VIDEO-2S Spanish absorber troubleshooting and replacement, alignment and
the correct procedures for installation and adjusting the
height control valves.
VIDEO-8 Fastener Installation: Keep It Tight, English 13 Minutes Illustrates the importance of installing fasteners properly.
Keep It Right
5-17
The Euclid Brand offers
"All-Makes" Aftermarket Maintenance Components
for these Vehicle Systems:
TRAILER PRODUCTS
Axle Tubes
"Dressed" Axles
5-18
INDEX
6-ii
E-700 TRAILER KING PIN
APPLICATION AND
EUCLID FLANGE GENERAL
NO. REPLACES DIAMETER INFORMATION
E-700 Holland Hitch KP-AAR-880 8" Various applications with
Weld-On King Pins. For
3/8" thick plate.
EUCLID
NO. REPLACES MATERIAL O.D. I.D. LENGTH DESCRIPTION
E-7450 Holland Hitch XB-0011-2 Polyurethane 2-1/4" 1-1/8" 4-1/4" Fifth Wheel
Bushing
E-8927 Holland Hitch XB-0012-2 Polyurethane 2-1/4" 1-7/16" 4-1/4" Fifth Wheel
Bushing
E-8652 Holland Hitch 14713-01 Polyurethane 2-1/2" 1-1/2" 4-1/4" Fifth Wheel
Holland Hitch 1604-9 Bushing
E-7451 Holland Hitch 1604-5 Polyurethane 2-3/4" 1-1/8" 4-1/4" Fifth Wheel
Holland Hitch XA1604-5 Bushing
6-1
JUNCTION BOX
EUCLID
NO. DESCRIPTION REMARKS
E-10158 Universal 7-Terminal Junction Box Precision molded cover and body. Five
possible slot openings. Five each open
and closed grommets. Molded terminal
block.
PLACARD HOLDER
EUCLID
NO. DESCRIPTION REMARKS
E-9868 Placard Holder - Constructed from corrosion resistant, die-stamped
Aluminum aluminum. Pre-punched holes for riveting to trailer walls.
Stainless steel snap fastener holds placard securely in
place. Sized for 10-3/4" x 10-3/4" slide-in placards.
E-9868W Placard Holder - White Constructed from corrosion resistant, die-stamped
aluminum. Pre-punched holes for riveting to trailer walls.
Stainless steel snap fastener holds placard securely in
place. Sized for 10-3/4" x 10-3/4" slide-in placards.
Outside dimension 12-1/2" x 14-1/8". Molded drainage
outlet. Packaged 25 per carton.
6-2
REBUILD KITS FOR HORTON FAN CLUTCHES
CLUTCH REPLACES
EUCLID NO. DIAMETER DESCRIPTION HORTON CLUTCH MODELS
E-824100 7-1/2" Upgrade Kit (less hub and friction disc) None 590XXX, 790XXX, 980XXX, 990XXX
E-824103 With assembled hub 994314
E-824104 With assembled hub and friction disc 994307
E-824101 9-1/2" Upgrade Kit (less hub and friction disc) None 591XXX, 791XXX, 981XXX, 991XXX
E-824105 With assembled hub 994315
E-824106 With assembled hub and friction disc 994305 6
E-824102 All Seal Kit 994205
6-3
NOTES
6-4
CROSS REFERENCE LISTING
COMPETITOR COMPETITOR EUCLID COMPETITOR COMPETITOR EUCLID COMPETITOR COMPETITOR EUCLID
NUMBER NAME NUMBER NUMBER NAME NUMBER NUMBER NAME NUMBER
0002-07 Reyco E-2002 08-007775 Dayton-Walther E-5800 09001964 Meritor E-11709
000207 Transpro E-2002 08-008134 Dayton-Walther E-4945 09001965 Meritor E-11673-R
000209 Transpro E-1835 08-008411 Dayton-Walther E-4956A 09001966 Meritor E-11673-L
001MBCGHS Fruehauf E-8658-R-BK 08-008411 Dayton-Walther E-5901 09001982 Meritor E-11674-R
001MDCGHS Fruehauf E-8658-B-BK 08-008551 Dayton-Walther E-5954 09001983 Meritor E-11674-L
007338-008211 Mercedes-Benz E-7043 08-034396 Dayton-Walther E-4957 09001984 Meritor E-11675-R
011249 Eaton E-2468 08-201140 Dayton-Walther E-5970 09001985 Meritor E-11675-L
019047 Velvac E-8897 08-201500 Dayton-Walther E-5972 09001990 Meritor E-11712
019048 Velvac E-8898 08-201758 Dayton-Walther E-5796 09001991 Meritor E-11676-R
019049 Velvac E-8897 08-201931 Dayton-Walther E-5970 09001992 Meritor E-11676-L
019050 Velvac E-8896 08-201932 Dayton-Walther E-5972 09001993 Meritor E-11698-R
02-00771 Peterbilt E-5982-L 08-201941 Dayton-Walther E-5970 09001994 Meritor E-11698-L
02-00772 Peterbilt E-5982-R 08-201943 Dayton-Walther E-5972 09001997 Meritor E-11659-R
022001 Velvac E-10744 08-203580 Dayton-Walther E-4957 09001998 Meritor E-11659-L
022002 Velvac E-10742 08-204734 Dayton-Walther E-5706 09001999 Meritor E-11699-R
022011 Velvac E-8577 08-205349 Dayton-Walther E-4956A 09002000 Meritor E-11699-L
022011-7 Velvac E-8577-BK 08-205349 Dayton-Walther E-5706 09002005 Meritor E-11717
022047 Velvac E-8578 08007591 Meritor E-11646 09002013 Meritor E-11718
023969 Bendix E-1495 08203868 Meritor E-11647 09002021 Meritor E-11684-R
03-02852 Peterbilt E-5983-R 08205373 Meritor E-11648 09002022 Meritor E-11684-L
03-02853 Peterbilt E-5983-L 08205435 Meritor E-11649 09002023 Meritor E-11685-R
030013 Velvac E-12S 08205575 Meritor E-11650 09002024 Meritor E-11685-L
030015 Velvac E-16S 08205740 Meritor E-11651 09002025 Meritor E-11686-R
030017 Velvac E-20S 08205741 Meritor E-11652 09002026 Meritor E-11686-L
030019 Velvac E-24S 08205833 Meritor E-11654 09002027 Meritor E-11687-R
030021 Velvac E-30S 08205879 Meritor E-11655 09002028 Meritor E-11687-L
030024 Velvac E-36S 08205895 Meritor E-11657 09002038 Meritor E-11694-R
031021 Velvac E-8888 08412-AL Ravens E-GC3030 09002039 Meritor E-11694-L
031023 Velvac E-8889 08P HDA E-656 09002047 Meritor E-11660-R
031025 Velvac E-8890 09 Black Max E-8888 09002048 Meritor E-11660-L
031027 Velvac E-8891 09-001275 Dayton-Walther E-5902 09002049 Meritor E-11661-R
031031 Velvac E-8892 09-001740 Dayton-Walther E-9837 09002050 Meritor E-11661-L
031033 Velvac E-8894 09-001989 Dayton-Walther E-9837 09002073 Meritor E-11724
031035 Velvac E-8895 09-006256 Dayton-Walther E-5827 09002082 Meritor E-11723-R
03283 Gaumers E-4961A 09-006257 Dayton-Walther E-5828 09002083 Meritor E-11723-L
034-188-00 Dexter E-10921 09-006302 Dayton-Walther E-5829 09002085 Meritor E-11678-R
034-188-01 Dexter E-10917 09-007295 Dayton-Walther E-5838 09002086 Meritor E-11678-L
034-188-03 Dexter E-10923 09-007564 Dayton-Walther E-5976 09002140 Meritor E-11725
034-188-04 Dexter E-10919 09-007587 Dayton-Walther E-5927 09002184 Meritor E-11719
034-188-09
034-189-00
Dexter
Dexter
E-10929
E-10922
09-008422
09-541417
Dayton-Walther
Dayton-Walther
E-5746
E-5570
09002204
09002205
Meritor
Meritor
E-11682-R
E-11682-L
7
034-189-01 Dexter E-10918 09-604017 Dayton-Walther E-5044 09002210 Meritor E-11681-R
034-189-03 Dexter E-10924 09-604317 Dayton-Walther E-5839 09002211 Meritor E-11681-L
034-189-04 Dexter E-10920 09-612317 Dayton-Walther E-5571A 09342-AL Ravens E-GP3030
034-189-09 Dexter E-10930 09-623517 Dayton-Walther E-5572A 09869701 Meritor E-11680-R
035021 Velvac E-8616 09-658417 Dayton-Walther E-5045 09869702 Meritor E-11680-L
035054 Velvac E-10736 09-699317 Dayton-Walther E-5040A 09B2023 Ford E-2111A
035058 Velvac E-10734 09-705317 Dayton-Walther E-5785A 09B2023 Ford E-500
035059 Velvac E-10732 09-717110 Dayton-Walther E-5046 09B2025 Ford E-501
035061 Velvac E-10733 09-717510 Dayton-Walther E-5047 09P HDA E-654
035079 Velvac E-8617 09-839910 Dayton-Walther E-5927 1-1592 Motivair E-807115
035079 Velvac E-8618 09-853601 Dayton-Walther E-4966-R 1-1601 Motivair E-807118
035081 Velvac E-8622 09-853602 Dayton-Walther E-4966-L 1-6331 Motivair E-803465
035087 Velvac E-8620 09-861901 Dayton-Walther E-8958-R 1-6335 Motivair E-807123
039074 Eaton E-2217A 09-861902 Dayton-Walther E-8958-L 1-87870-242-0 Isuzu E-7411
039074 Eaton E-595 09-870817 Dayton-Walther E-5784A 1-88302-765-0 Isuzu E-7390
039075 Eaton E-596A 09-870917 Dayton-Walther E-5785A 10-5 Sealco E-SL10-5
03P HDA E-535 09-885310 Dayton-Walther E-5926 1000 Webb E-5107
04-09179 Dayton-Walther E-2453A 09-890817 Dayton-Walther E-5784A 1000-5A Sealco E-SL1000-5A
04-09747 Dayton-Walther E-2359 09001217 Meritor E-11695-R 1000-5A Sealco E-SL1000-5AX
04-14059 Dayton-Walther E-2360 09001218 Meritor E-11695-L 1000-5AX Sealco E-SL1000-5AX
04-14078 Dayton-Walther E-5107 09001254 Meritor E-11658-R 1000462 Eaton E-2807
04-14131 Dayton-Walther E-5113 09001255 Meritor E-11658-L 10005AX Bendix E-SL1000-5AX
04-14344 Dayton-Walther E-5107 09001400 Meritor E-11721-R 10005AX Midland E-SL1000-5AX
04-14802 Dayton-Walther E-5107 09001401 Meritor E-11721-L 100090 TSE E-8888
04-15501-XXXX Webb E-5107 09001525 Meritor E-11662-R 1001 Webb E-2360
04-15675-002 PACCAR 04-15675-002 09001526 Meritor E-11662-L 100120 TSE E-8889
04-15675-003 PACCAR 04-15675-003 09001539 Meritor E-11664-R 100122 Budd E-5115
0415675002 VOLVO 04-15675-002 09001540 Meritor E-11664-L 100160 TSE E-8890
0415675003 VOLVO 04-15675-003 09001555 Meritor E-11665-R 1002 Webb E-2360
049624 Bendix E-1493 09001556 Meritor E-11665-L 100200 TSE E-8891
04P HDA E-526 09001614 Meritor E-11666-R 1002254 Eaton E-3520A
055060 Velvac E-10158 09001615 Meritor E-11666-L 100231 Budd E-5115
059190 Webb E-9011-R 09001650 Meritor E-11667-R 10024 Midland E-9111
05P HDA E-581 09001651 Meritor E-11667-L 100240 TSE E-8892
065041X Bendix E-BN065041X 09001652 Meritor E-11668-R 10028 Midland E-9110
065044X Bendix E-BN065044X 09001653 Meritor E-11668-L 100300 TSE E-8894
065104X Bendix E-BN065104X 09001668 Meritor E-11696-R 1003025 TSE E-8900
065125X Bendix E-BN065125X 09001669 Meritor E-11696-L 100360 TSE E-8895
065145X Bendix E-BN065145X 09001727 Meritor E-11701 10037 Midland E-2307
065146X Bendix E-BN065146X 09001728 Meritor E-11702 100524/5 Conmet E-5929-R
065156X Bendix E-BN065156X 09001763 Meritor E-11669-R 1006500 Eaton E-5124
065157X Bendix E-BN065157X 09001764 Meritor E-11669-L 1006534 Eaton E-5125
065225X Bendix E-BN065225X 09001811 Meritor E-11703 1009023 MGM Brakes E-09SD300R
065313X Bendix E-BN065313X 09001825 Meritor E-11704 101100X Bendix E-BN101100X
065437X Bendix E-BN065437X 09001826 Meritor E-11705 101100X Midland E-BN101100X
065438X Bendix E-BN065438X 09001827 Meritor E-11722-R 101112X Bendix E-BN101112X
065439X Bendix E-BN065439X 09001828 Meritor E-11722-L 101112X Midland E-BN101112X
06605 Motor Wheel E-5708 09001853 Meritor E-11706 101135 Bendix E-BN101135X
08-004350 Dayton-Walther E-5799 09001855 Meritor E-11707 101135X Bendix E-BN101135X
08-005148 Dayton-Walther E-4955 09001912 Meritor E-11720-R 101142 Conmet E-5121
08-005149 Dayton-Walther E-4962 09001913 Meritor E-11720-L 101142X Bendix E-BN101142X
08-005716 Dayton-Walther E-4963 09001914 Meritor E-11692 101142X Midland E-BN101142X
08-006654 Dayton-Walther E-4958 09001925 Meritor E-11697-R 101146 Conmet E-5118
08-007358 Dayton-Walther E-5796 09001926 Meritor E-11697-L 101153 Conmet E-5121
08-007471 Dayton-Walther E-5955 09001958 Meritor E-11708 101158 Conmet E-5118
8-1
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-1413A 1-130 E-1887ASHD 1-88 E-2106 1-209 E-2300 4-66
E-1416 1-221 E-1893 1-120 E-2107 1-153,1-171 E-2301 4-66
E-1416A 1-221 E-1893S 1-120 E-2108 1-153,1-171 E-2302 4-66
E-1418 1-126 E-1894 1-246 E-2109 1-127 E-2303 4-60,4-70,
E-1420 1-156,1-179 E-1901 5-5,5-6 E-2111A 1-108 4-74
E-1421 1-156,1-179 E-1902 5-5,5-6 E-2119 1-112 E-2304 4-70,4-74
E-1422 1-155,1-178 E-1903 5-5,5-6 E-2121 1-90 E-2305 4-60,4-70,
E-1423 1-155,1-178 E-1904 5-5,5-6 E-2121HD 1-90 4-74
E-1424A 1-154,1-171 E-1905 5-5,5-6 E-2121S 1-90 E-2306 4-57
E-1425A 1-154,1-171 E-1906 5-5,5-6 E-2122 1-198 E-2307 1-231
E-1426 1-114 E-1907 5-5,5-6 E-2122-2 1-198 E-2340 4-78
E-1428A 1-125 E-1908 5-5,5-6 E-2123 1-196 E-2341 4-78
E-1428S 1-125 E-1909 5-5,5-6 E-2125 1-194 E-2361 1-217
E-1457 1-132,1-252 E-1910 5-5,5-6 E-2125-2 1-194 E-2363 1-201
E-1458 1-126,1-252 E-1911 5-5,5-6 E-2126 1-74 E-2380 1-219
E-1486 1-246 E-1912 5-5,5-6 E-2128 4-58,4-59 E-2382 1-201
E-1489 1-132 E-1913 5-5,5-6 E-2130 5-12 E-2389 1-120
E-1493 1-246 E-1914 5-5,5-6 E-2134 1-251 E-2390 1-111
E-1495 1-246 E-1915 5-5,5-6 E-2135 1-251 E-2391 1-118
E-1496 1-247 E-1916 5-5,5-6 E-2136 1-251 E-2392 1-115
E-1497 1-126,1-247 E-1917 5-5,5-6 E-2137 1-251 E-2393 1-131
E-1559 4-57 E-1918 5-5,5-6 E-2138 1-251 E-2393A 1-131
E-1561 4-57 E-1919 5-5,5-6 E-2139 1-251 E-2394 1-131
E-1563 1-151,1-176 E-1920 5-5,5-6 E-2140 1-252 E-2394A 1-131
E-1564 1-151,1-176 E-1921 5-5,5-6 E-2141 1-252 E-2395 1-108
E-1565 1-223 E-1922 5-5,5-6 E-2142 1-252 E-2396 1-109
E-1567 1-218 E-1923 5-5,5-6 E-2144 2-5 E-2398 1-122
E-1569 1-226 E-1924 5-5,5-6 E-2153 1-247 E-2399 1-127
E-1571 1-218 E-1925 5-5,5-6 E-2154 1-247 E-2401 1-115
E-1574-BK 1-231 E-1926 5-5,5-6 E-2155 1-247 E-2402HD 1-77
E-1574HD 1-231 E-1927 5-5,5-6 E-2156 1-247 E-2403HD 1-73
E-1577A 1-218 E-1928 5-5,5-6 E-2157 1-248 E-2404 1-225
E-1580 1-130 E-1929 5-5,5-6 E-2158 1-248 E-2405 1-222
E-1581 1-116 E-1930 5-5,5-6 E-2159 1-248 E-2406 1-221
E-1582 1-107 E-1931 5-5,5-6 E-2161 1-246 E-2407 1-219
E-1583 1-122 E-1932 5-5,5-6 E-2162 1-246 E-2408 1-218
E-1597A 5-5,5-6,5-7 E-1933 5-5,5-6 E-2163 1-126,1-247 E-2409 1-223
E-1600 5-12 E-1934 5-5,5-6 E-2164 1-246 E-2411A 1-223
E-1607HD 1-100 E-1935 5-5,5-6 E-2176 1-108 E-2412 1-153,1-172
E-1735 1-253 E-1936 5-5,5-6 E-2177 1-107 E-2412A 1-153,1-163
E-1773C 1-148,1-163 E-1937 5-5,5-6 E-2193 1-253 E-2413 1-153,1-172
E-1774C 1-148,1-163 E-2002 4-42 E-2208 1-107 E-2413A 1-153,1-163
E-1775 1-148,1-162 E-2015 1-249,1-254 E-2214 1-108 E-2417 4-73
E-1776 1-148,1-162 E-2029 1-113 E-2215 1-107 E-2418 4-73
E-1777 1-134 E-2030HD 1-77 E-2217A 1-108 E-2419 4-73
E-1778 1-134 E-2086B 1-195 E-2217S 1-108 E-2420 4-73
E-1778-77-BK 3-6 E-2086B-2 1-195 E-2218 1-119 E-2421 4-73
E-1778-78-BK 3-6 E-2087 1-208 E-2237 4-61,4-62 E-2422 4-73
E-1778-88-BK 3-6 E-2087-2 1-208 E-2241 1-136 E-2423 4-74
E-1781 1-222 E-2088A 1-200 E-2241-55-BK 3-6 E-2424 4-74
E-1782 1-222 E-2088AHD 1-200 E-2241-77-BK 3-6 E-2425 4-74
E-1788 1-147,1-171 E-2088AHD-2 1-201 E-2241-78-BK 3-6 E-2431 4-78
E-1789 1-147,1-171 E-2089 1-196 E-2241-88-BK 3-6 E-2432 4-78
E-1808 1-118 E-2090 1-197 E-2277 2-15 E-2433 4-78
E-1812 1-77 E-2090-2 1-197 E-2281 1-246 E-2434 4-78
E-1816HD 1-104 E-2091 1-229 E-2282 1-246 E-2435 4-78
E-1816HDMB 1-102 E-2096 2-5 E-2286 1-74 E-2436 4-78
E-1816S 1-103 E-2098 1-259,5-3 E-2287 1-207 E-2437 4-78
E-1816SHD 1-103 E-2099 1-154,1-176 E-2287-2 1-208 E-2438 4-78
E-1828 4-8 E-2100 1-154,1-176 E-2290 1-253 E-2441B 1-152,1-177
E-1835 4-7 E-2101 1-122 E-2291 1-220 E-2442B 1-152,1-177
E-1880B 1-124,1-125 E-2102 1-217 E-2296 4-65 E-2443B 1-154,1-177
E-1880S 1-124 E-2103 1-209 E-2297 4-65 E-2444B 1-154,1-177
E-1887AHD 1-87 E-2104 1-209 E-2299 4-65 E-2445B 1-156,1-177
8-2
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-2446B 1-156,1-177 E-2686 1-135 E-2803 1-110 E-3501 4-63
E-2447A 1-152,1-177 E-2687 1-135 E-2804 1-126 E-3502 4-63
E-2448A 1-152,1-177 E-2689 1-132,1-252 E-2805 1-126 E-3504 4-71
E-2449A 1-153,1-177 E-2690A 1-219 E-2807 1-141 E-3505 4-71
E-2450A 1-153,1-177 E-2693 1-153,1-174 E-2819 1-134 E-3506 4-71
E-2451A 1-156,1-177 E-2694 1-153,1-174 E-2820 1-88 E-3507 4-71
E-2452A 1-156,1-177 E-2695 1-218 E-2821 1-105 E-3508 4-71
E-2458-BK 1-230 E-2696A 1-196 E-3007A 1-116 E-3509 4-71
E-2458HD 1-230 E-2696A-2 1-197 E-3008 4-58 E-3510 4-66
E-2459-BK 1-230 E-2700B 1-147,1-163 E-3009 4-61 E-3511 1-107
E-2459HD 1-230 E-2701B 1-147,1-163 E-3010 4-58 E-3512 1-125
E-2460 4-68 E-2712 1-133 E-3227 1-116 E-3513 1-127
E-2461 4-68,4-69 E-2713 1-84 E-3228 1-124 E-3516 1-153,1-176
E-2462 4-68,4-69, E-2714A 1-149,1-164 E-3231 1-108 E-3517 1-153,1-176
4-72,4-73 E-2715A 1-149,1-164 E-3234 1-225 E-3518 1-105
E-2463 4-68 E-2716 1-216 E-3291 1-83 E-3520A 1-202
E-2464 4-68 E-2717 1-221 E-3303 1-136 E-3520A-2 1-203
E-2465 4-68 E-2720 1-225 E-3304 1-136 E-3520AHD 1-203
E-2467 4-68 E-2723 1-115 E-3349 1-148 E-3520AHD-2 1-203
E-2468 4-68 E-2724 1-118 E-3350 1-148 E-3522 1-136
E-2469 1-187 E-2725 1-117 E-3353A 1-192 E-3523 1-150,1-162
E-2469-2 1-188 E-2726 1-117 E-3354 1-193 E-3524 1-150,1-162
E-2474 1-134 E-2728 1-133 E-3371 5-5,5-6 E-3525 1-253
E-2475 1-125 E-2729 1-133 E-3372 5-5,5-6 E-3710HD 1-91
E-2476 1-126,1-252 E-2732 1-215 E-3373HD 1-75 E-3710S 1-92
E-2477B 1-209 E-2733 1-222 E-3374HD 1-73 E-3710SHD 1-92
E-2478B 1-145,1-163 E-2734 1-225 E-3379 1-258,5-2 E-3711 1-111
E-2479B 1-145,1-163 E-2735A 1-140 E-3417 1-136 E-3711S 1-111
E-2484 1-250 E-2739 1-259,5-3 E-3421A 1-108 E-3713 1-135
E-2492 1-155,1-173 E-2740 1-82 E-3424 1-113 E-3714 1-135
E-2493 1-155,1-173 E-2745 1-126,1-247 E-3427 1-118 E-3723-L 4-14 8
E-2494 1-186 E-2746 1-249 E-3437 1-123 E-3723-R 4-14
E-2517 1-217 E-2760 1-227 E-3438 1-132 E-3728-L 4-14
E-2518A 2-5 E-2761 1-227 E-3439 1-132 E-3728-R 4-14
E-2522 1-253 E-2762 1-228 E-3441 1-134 E-3775 1-140
E-2526 1-188 E-2763 1-228 E-3445 1-113 E-3781 2-5
E-2550 4-57 E-2764 2-3 E-3446 1-191 E-3782 1-76
E-2551 1-215 E-2766 1-111 E-3446-2 1-191 E-3801 1-89
E-2552 1-247 E-2767 1-127 E-3447 1-215 E-3823 1-136
E-2644 5-7,5-12 E-2768 1-124 E-3460 1-144,1-159 E-3823-77 3-6
E-2652 5-12 E-2769HD 1-95 E-3461 1-144,1-159 E-3823-88 3-6
E-2654 1-257,5-1, E-2769S 1-95 E-3468A 1-195 E-3824 1-125
5-13 E-2769SHD 1-96 E-3469 1-221 E-3854 1-153,1-183
E-2655 5-9 E-2770 1-123 E-3471 1-223 E-3855 1-153,1-183
E-2656 1-257,5-1 E-2773 1-111 E-3472 1-223 E-3856 1-155,1-183
E-2658 4-66,4-67 E-2778 1-137 E-3473 1-224 E-3857 1-155,1-183
E-2659 4-66 E-2778-55-BK 3-6 E-3474 1-222 E-3858 1-98
E-2660 4-66 E-2778-77-BK 3-6 E-3475 1-223 E-3859 1-222
E-2661 4-67 E-2778-78-BK 3-6 E-3476 1-223 E-3861 1-156,1-176
E-2662 4-67 E-2778-88-BK 3-6 E-3477 1-224 E-3862 1-156,1-176
E-2663 4-67 E-2785 1-125 E-3478 1-224 E-3863A 1-257,5-1
E-2668 1-230 E-2786 1-149,1-162 E-3479 1-223 E-3864B 1-258,5-2
E-2669 1-230 E-2787 1-149,1-162 E-3481A 1-122 E-3865 1-259,5-3
E-2670 1-220 E-2792 1-156,1-179 E-3482 1-109 E-3869 1-80
E-2672 1-107 E-2793 1-156,1-179 E-3483 1-108 E-3870 1-113
E-2675HD 1-98 E-2794 1-152,1-172 E-3484 1-74 E-3871 1-115
E-2676 1-97 E-2795 1-152,1-172 E-3490B 1-124 E-3872 1-123
E-2679A 1-202 E-2796 1-156,1-173 E-3490S 1-124 E-3873 1-126
E-2679AHD 1-202 E-2797 1-156,1-173 E-3491 1-130 E-3874 1-118
E-2680 1-207 E-2798 1-113 E-3491-77 3-6 E-3876 1-192
E-2680-2 1-207 E-2799 1-145,1-162 E-3491-88 3-6 E-3876-2 1-192
E-2681A 2-5 E-2800 1-145,1-162 E-3492 1-250 E-3877 1-215
E-2684 1-136 E-2801 1-137 E-3495 1-132,1-252 E-3878 1-221
E-2685 1-135 E-2802 1-109 E-3499 1-250 E-3895S 1-101
8-3
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-3895SHD 1-102 E-4721 1-156,1-174 E-4917 1-145,1-159 E-5040A 4-46
E-3909 5-8 E-4722 1-153,1-174 E-4918 1-146,1-159 E-5041 4-49
E-3910 5-8 E-4723 1-153,1-174 E-4919 1-146,1-159 E-5044 4-46
E-3911 5-8 E-4732A 1-150,1-167 E-4934A 1-213 E-5045 4-45
E-3914 1-107 E-4733A 1-150,1-167 E-4935 1-214 E-5046 4-50
E-3920 1-135 E-4736 1-226 E-4936 1-146,1-159 E-5047 4-49
E-3920-55-BK 3-6 E-4737A 1-213 E-4937 1-146,1-159 E-5055 4-46
E-3920-77-BK 3-6 E-4738A 1-213 E-4940 1-144,1-161 E-5056 1-145,1-164
E-3920-78-BK 3-6 E-4739 1-214 E-4941 1-144,1-161 E-5057 1-145,1-164
E-3975 1-117 E-4740 1-149,1-162 E-4942 4-39 E-5058 1-144,1-158
E-3989AHD 1-204 E-4741 1-149,1-162 E-4944 4-39 E-5059 1-144,1-158
E-3989AHD-2 1-204 E-4785 1-133 E-4945 4-39 E-5060 1-145,1-158
E-3991 1-222 E-4800 1-81 E-4946 4-39 E-5061 1-145,1-158
E-3992 1-105 E-4849 4-62 E-4947 4-39 E-5062 1-148,1-158
E-3993B 1-194 E-4850 4-64 E-4948 4-39 E-5063 1-148,1-158
E-3993B-2 1-194 E-4851 4-65 E-4949 4-39 E-5066 1-145,1-158
E-3994 1-251 E-4852 4-65 E-4950 4-39 E-5067 1-145,1-158
E-3995 1-251 E-4853 4-65 E-4951 4-39 E-5086 1-97
E-3996 1-250 E-4854 4-63 E-4952 4-39 E-5087 1-111
E-3997 1-250 E-4855 4-64 E-4953 4-39 E-5088 1-127
E-3998 1-250 E-4856 4-67 E-4955 4-42 E-5089 1-108
E-3999 1-250 E-4857 4-71 E-4956A 4-43 E-5092 1-136
E-4078 1-117 E-4858 4-67 E-4957 4-43 E-5093 1-225
E-4311EHD 1-88 E-4859 4-63 E-4958 4-42 E-5094A 1-200
E-4515P 1-104 E-4861 4-63 E-4960 4-37 E-5095 1-222
E-4515PHD 1-104 E-4862 4-69 E-4961A 1-116,4-7 E-5096 1-154,1-178
E-4515Q 1-93 E-4863 4-69 E-4962 4-8 E-5097 1-154,1-178
E-4515QHD 1-94 E-4864 4-69 E-4963 4-8 E-5122 1-126
E-4515QMB 1-94 E-4865 4-63 E-4964-L 4-25 E-5123 1-123
E-4515QMBHD 1-94 E-4868 4-65 E-4964-R 4-25 E-5124 1-117
E-4515U 1-102 E-4869 4-63 E-4965-L 4-25 E-5125 1-117
E-4515UHD 1-102 E-4870 4-65 E-4965-R 4-25 E-5126 1-132
E-4515X 1-92 E-4871 4-64 E-4966-L 4-25 E-5126-77 3-6
E-4515XHD 1-93 E-4873 4-67 E-4966-R 4-25 E-5126-88-BK 3-6
E-4586 1-212 E-4874 4-62 E-4967-L 4-25 E-5127 1-215
E-4587 1-212 E-4875 4-64 E-4967-R 4-25 E-5128 1-221
E-4593 1-212 E-4876 4-67 E-4968-L 4-25 E-5129 1-144
E-4594 1-212 E-4877 4-72 E-4968-R 4-25 E-512S 1-111
E-4691 1-82 E-4878 4-69 E-4969-L 4-26 E-5130 1-144
E-4692 1-84 E-4879 4-63 E-4969-R 4-26 E-5131 1-146
E-4702-KT 1-79 E-4880S 1-91 E-4975-R 4-3 E-5132 1-146
E-4702B 1-148,1-163 E-4880SHD 1-91 E-4976-R 4-3 E-5133 1-146
E-4703B 1-148,1-163 E-4881 4-71 E-4979-R 4-3 E-5134 1-146
E-4704B 1-144,1-163 E-4884 1-155,1-172 E-4987A 4-43 E-5135 1-147
E-4705B 1-144,1-163 E-4885 1-155,1-172 E-4988-L 4-30 E-5136 1-147
E-4706B 1-144,1-163 E-4886 1-147 E-4988-R 4-30 E-5137 1-223
E-4707B 1-144,1-163 E-4887 1-147 E-4989 4-44 E-5138 1-223
E-4708B 1-149,1-163 E-4888 1-149,1-162 E-4990A 4-44 E-5139 1-79
E-4709B 1-149,1-163 E-4889 1-149,1-162 E-4991 1-145,1-161 E-5140 1-190
E-4709ES 1-85 E-4890 1-154,1-175 E-4992 1-145,1-161 E-5140-2 1-190
E-4709ES2 1-87 E-4891 1-154,1-175 E-4993 1-145,1-161 E-5205 5-11
E-4710B 1-151,1-163 E-4892 1-144,1-171 E-4994 1-145,1-161 E-5206 5-11
E-4711B 1-151,1-163 E-4893 1-144,1-171 E-4995 1-145,1-161 E-5207 5-11
E-4712 1-151,1-171 E-4900 1-153,1-176 E-4996 1-145,1-161 E-5208 5-11
E-4713 1-151,1-171 E-4901 1-153,1-176 E-4997 1-146,1-161 E-5239 1-136
E-4714 1-152,1-172 E-4902 1-137 E-4998 1-146,1-161 E-5240A 1-213
E-4714A 1-152,1-163 E-4904 1-227 E-5007 4-8 E-5241A 1-213
E-4715 1-152,1-172 E-4906 1-147,1-159 E-5008 4-8 E-5242A 1-213
E-4715A 1-152,1-163 E-4907 1-147,1-159 E-5012 4-44 E-5243A 1-213
E-4716 1-156,1-173 E-4910A 1-150,1-167 E-5018 4-42 E-5244A 1-213
E-4717 1-156,1-173 E-4911A 1-150,1-167 E-5032 4-8,4-42 E-5303A 1-131
E-4718 1-156,1-173 E-4912 1-144,1-159 E-5035 4-46 E-5304 1-111
E-4719 1-156,1-173 E-4913 1-144,1-159 E-5036 4-44 E-5305 1-126
E-4720 1-156,1-174 E-4916 1-145,1-159
8-4
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-5306 1-76 E-5542 1-254 E-5716-L 4-10 E-5820 4-47
E-5307 1-186 E-5543 1-254 E-5716-R 4-10 E-5821 4-47
E-5307-2 1-187 E-5544 1-256 E-5717-L 4-10 E-5822 4-47
E-545A 1-125 E-5545 1-256 E-5717-R 4-10 E-5823 4-47
E-5476 1-212 E-5551-L 4-11 E-5718-L 4-21 E-5824 4-50
E-5477 1-107 E-5551-R 4-11 E-5718-R 4-21 E-5825 4-50
E-5478 1-116 E-5553-L 4-12 E-5719-L 4-21 E-5827 4-46
E-5480 1-134 E-5553-R 4-12 E-5719-R 4-21 E-5828 4-46
E-5480-77 3-6 E-5554-L 4-4 E-5720-L 4-22 E-5829 4-46
E-5480-78 3-6 E-5554-R 4-4 E-5720-R 4-22 E-5833 5-10
E-5480-88 3-6 E-5556-L 4-10 E-5721-L 4-23 E-5834 5-10
E-5481A 1-85 E-5556-R 4-10 E-5721-R 4-23 E-5837 4-47
E-5482 1-224 E-5557-L 4-12 E-5722-L 4-24 E-5838 4-45
E-5490 1-145,1-162 E-5557-R 4-12 E-5722-R 4-24 E-5839 4-46
E-5491 1-145,1-162 E-5558-L 4-10 E-5724 4-28 E-5840 4-49
E-5492 1-148,1-162 E-5558-R 4-10 E-5726 4-43 E-5841 4-47
E-5493 1-148,1-162 E-5559-L 4-11 E-5727 4-43 E-5850 5-9
E-5494 1-153,1-174 E-5559-R 4-11 E-5728 4-43 E-5851 5-9
E-5495 1-153,1-174 E-5560-L 4-11 E-5729 4-43 E-5854 5-9
E-5496 1-156,1-174 E-5560-R 4-11 E-5734 4-6 E-5855 5-9
E-5497 1-156,1-174 E-5561-L 4-11 E-5736 4-41 E-5856 5-9
E-5498 1-230 E-5561-R 4-11 E-5737 4-41 E-5857 5-10
E-5499 1-106 E-5570 4-45 E-5738 4-41 E-5859 5-10
E-5500 1-137 E-5571A 4-45 E-5739 4-41 E-5868-L 4-18
E-5501 1-193 E-5572A 4-46 E-5740 4-41 E-5868-R 4-18
E-5501-2 1-193 E-5573 4-46 E-5742 4-41 E-5869-L 4-26
E-5503 1-136 E-5576-L 4-5 E-5743 4-41 E-5869-R 4-26
E-5503-77 3-6 E-5576-R 4-6 E-5746 4-45 E-5870-L 4-27
E-5503-78 3-6 E-5578-L 4-5 E-5747 4-47 E-5870-R 4-27
E-5503-88 3-6 E-5578-R 4-5 E-5748-L 4-17 E-5871-L 4-21
E-5504A 1-147,1-165 E-5579-L 4-5 E-5748-R 4-17 E-5871-R 4-21 8
E-5505A 1-147,1-165 E-5579-R 4-5 E-5749-L 4-18 E-5872 4-37
E-5506 1-152,1-178 E-5585-L 4-11 E-5749-R 4-18 E-5876-L 4-13
E-5507 1-152,1-178 E-5585-R 4-11 E-5750-L 4-18 E-5876-R 4-13
E-5508 1-154,1-178 E-5587-L 4-30 E-5750-R 4-18 E-5882 4-47
E-5509 1-154,1-178 E-5587-R 4-30 E-5753 4-47 E-5883 4-46
E-5510 1-156,1-178 E-5588-L 4-30 E-5754 4-48 E-5885 4-47
E-5511 1-156,1-178 E-5588-R 4-30 E-5755 4-47 E-5887 4-43
E-5512 1-216 E-5589-L 4-10 E-5756-L 4-27 E-5889 4-48
E-5513 1-204 E-5589-R 4-10 E-5756-R 4-27 E-5890 4-48
E-5515 1-101 E-5610-R 4-32 E-5757-L 4-27 E-5891 4-48
E-5516 1-152,1-184 E-5610-L 4-32 E-5757-R 4-27 E-5892 4-6
E-5517 1-152,1-184 E-5612-R 4-32 E-5761 4-44 E-5896-L 4-22
E-5518 1-153,1-184 E-5612-L 4-32 E-5764-L 4-27 E-5896-R 4-22
E-5519 1-153,1-184 E-5618-L 4-30 E-5764-R 4-27 E-5897-L 4-16
E-5520 1-155,1-184 E-5618-R 4-30 E-5765-L 4-27 E-5897-R 4-16
E-5521 1-155,1-184 E-5632 4-29 E-5765-R 4-27 E-5898-L 4-16
E-5522 1-152,1-184 E-5652-L 4-3 E-5766-L 4-28 E-5898-R 4-16
E-5523 1-152,1-184 E-5652-R 4-3 E-5766-R 4-28 E-5899-L 4-18
E-5524 1-154,1-184 E-5682 4-29 E-5775 4-27 E-5899-R 4-18
E-5525 1-154,1-184 E-5683 4-29 E-5776 4-27 E-5900-L 4-21
E-5526 1-155,1-184 E-5702 4-39 E-5778 4-49 E-5900-R 4-21
E-5527 1-155,1-184 E-5704 4-6 E-5780 4-49 E-5902 4-47
E-5528 1-133 E-5706 4-43 E-5781 4-47 E-5904A 4-48
E-5528-88-BK 3-6 E-5708 4-7 E-5782 4-49 E-5905A 4-48
E-5529 1-146,1-160 E-5710 4-7 E-5783 4-47 E-5906 4-48
E-5530 1-146,1-160 E-5711 4-7 E-5784A 4-45 E-5909-L 4-24
E-5531 1-250 E-5712 4-44 E-5785A 4-46 E-5909-R 4-24
E-5532 1-251 E-5713-L 4-9 E-5796 4-36 E-5910-L 4-24
E-5537 1-251 E-5713-R 4-9 E-5798 4-36 E-5910-R 4-24
E-5538 1-251 E-5714-L 4-9 E-5799 4-37 E-5911-L 4-23
E-5539 1-251 E-5714-R 4-9 E-5800 4-37 E-5911-R 4-23
E-5540 1-251 E-5715-L 4-9 E-5801 4-37 E-5916-L 4-15
E-5541 1-252 E-5715-R 4-10 E-5816 4-29 E-5916-R 4-15
8-5
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-5918-L 4-13 E-5989-L 4-13 E-6080 1-218 E-6988A 1-243
E-5918-R 4-13 E-5989-R 4-13 E-6081 1-156 E-6989A 1-243
E-5920-L 4-13 E-5990-L 4-14 E-6082 1-156 E-6990A 1-243
E-5920-R 4-13 E-5990-R 4-14 E-6101 1-155,1-184 E-6991A 1-243
E-5922-L 4-15 E-5991 4-6 E-6102 1-155,1-184 E-6992A 1-243
E-5922-R 4-15 E-5992A 4-33 E-6103 1-156,1-184 E-6993A 1-243
E-5923-L 4-16 E-5993 4-33 E-6104 1-156,1-184 E-6994A 1-243
E-5923-R 4-16 E-5994 4-33 E-6109 1-230 E-6995A 1-243
E-5924-L 4-15 E-5995-L 4-4 E-6110 1-230 E-6996A 1-243
E-5924-R 4-15 E-5995-R 4-4 E-6111 1-229 E-6999S 1-96
E-5926 4-44 E-5996-L 4-5 E-6112 1-229 E-6999SHD 1-97
E-5927 4-44 E-5996-R 4-5 E-6113 1-229 E-7039 3-11
E-5929-L 4-13 E-5997 4-34 E-6137 5-5,5-6 E-7040A 3-11
E-5929-R 4-13 E-5998 4-34 E-6138 4-64 E-7041 3-11
E-5930-L 4-13 E-5999 4-34 E-6139 4-64 E-7043 3-11
E-5930-R 4-13 E-6000A 4-7 E-6140 4-72 E-7044 3-11
E-5931-L 4-12 E-6001A 4-33 E-6141 4-72 E-7161 3-7
E-5931-R 4-12 E-6023-L 4-12 E-6142 4-69,4-73 E-7162 3-7
E-5932-L 4-12 E-6023-R 4-12 E-6144 4-71 E-7163 3-7
E-5932-R 4-12 E-6024-L 4-12 E-6145 4-70 E-7164 3-7
E-5933-L 4-13 E-6024-R 4-12 E-6146 4-70 E-7165 3-7
E-5933-R 4-13 E-6026-L 4-31 E-6147 4-70 E-7166 3-7
E-5935-L 4-14 E-6026-R 4-31 E-6148 4-70 E-7167 3-7
E-5935-R 4-14 E-6027-L 4-31 E-6879 1-81 E-7212A 1-254
E-5936-L 4-14 E-6027-R 4-31 E-6884 1-155,1-183 E-7213A 1-255
E-5936-R 4-14 E-6028-L 4-31 E-6885 1-155,1-183 E-7214A 1-255
E-5937-L 4-14 E-6028-R 4-31 E-6900A 1-235 E-7217 1-157,1-183
E-5937-R 4-14 E-6029A 4-33 E-6902A 1-235 E-7218 1-157,1-183
E-5944 4-37 E-6030A 4-33 E-6903A 1-235 E-7219 1-157,1-183
E-5946 4-37 E-6033-L 4-17 E-6905A 1-235 E-7220 1-157,1-183
E-5947 4-37 E-6033-R 4-17 E-6906A 1-235 E-7230 1-132
E-5949 4-37 E-6034 4-35 E-6907A 1-235 E-7231 1-83
E-5952 4-41 E-6035 4-35 E-6910 1-236 E-7232 1-82
E-5953 4-50 E-6036 4-35 E-6911 1-236 E-7235 1-190
E-5954 4-37 E-6038 5-9 E-6912 1-236 E-7236 1-134
E-5955 4-37 E-6039 5-15 E-6913 1-236 E-7237 1-84
E-5957 4-41 E-6040 5-15 E-6914A 1-236 E-7238 1-85
E-5960 4-41 E-6041 5-15 E-6918A 1-236 E-7360 3-11
E-5961 4-41 E-6053 4-49 E-6919A 1-236 E-7450 6-1
E-5962 4-41 E-6054 4-49 E-6923B 1-237 E-7451 6-1
E-5963 4-42 E-6057-L 4-22 E-6924B 1-237 E-7651 5-5
E-5964 4-42 E-6057-R 4-22 E-6925B 1-237 E-7653 5-5
E-5970 4-42 E-6058-L 4-31 E-6927B 1-237 E-7655 4-78
E-5971 4-42 E-6058-R 4-31 E-6928 1-237 E-7658 4-60
E-5972 4-42 E-6059-L 4-31 E-6932 1-237 E-7659 4-60
E-5973 4-50 E-6059-R 4-31 E-6933 1-237 E-7660 4-60
E-5974 4-48 E-6060-L 4-5 E-6934 1-237 E-7662 4-60
E-5976 4-50 E-6060-R 4-5 E-6936 1-238 E-7663 4-59
E-5977-L 4-4 E-6061 5-3 E-6937 1-238 E-7664 4-59
E-5977-R 4-4 E-6064 5-13 E-6940 1-238 E-7665 4-59
E-5978-L 4-2 E-6065 5-13 E-6942 1-238 E-7666 4-59
E-5978-R 4-2 E-6066 5-13 E-6944 1-238 E-7775 4-8
E-5982-L 4-19 E-6067 5-13 E-6946 1-238 E-7895-L 4-1
E-5982-R 4-19 E-6068 5-13 E-6947 1-238 E-7895-R 4-1
E-5983-L 4-22 E-6069 5-13 E-6951A 1-235,1-237 E-7896-L 4-1
E-5983-R 4-22 E-6070 5-14 E-6956 1-241 E-7896-R 4-1
E-5985-L 4-19 E-6071 5-14 E-6966A 1-241 E-7897-L 4-1
E-5985-R 4-19 E-6072 5-14 E-6967A 1-241 E-7897-R 4-1
E-5986-L 4-16 E-6073 5-14 E-6981 1-235 E-7898-L 4-2
E-5986-R 4-16 E-6074 5-14 E-6982 1-235 E-7898-R 4-2
E-5987-L 4-21 E-6075 1-135 E-6983 1-240 E-7899 1-81
E-5987-R 4-21 E-6076 1-219 E-6984 1-240 E-7900 3-7
E-5988-L 4-3 E-6077 1-224 E-6985 1-240 E-7901 3-7
E-5988-R 4-3 E-6078 1-204 E-6987A 1-243
8-6
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-7902 3-7 E-8658-R-BK 2-10 E-8978-L 4-23 E-9032 1-146,1-158
E-7903 3-7 E-8888 2-2 E-8978-R 4-23 E-9033 1-146,1-158
E-7904 3-7 E-8889 2-2 E-8979-L 4-20 E-9034 1-147,1-158
E-7905 3-7 E-8890 2-4 E-8979-R 4-20 E-9035 1-147,1-158
E-7909 3-7 E-8891 2-4 E-8980 4-35 E-9036 1-132
E-7910 3-7 E-8892 2-4 E-8981 4-35 E-9037 1-123
E-7911 3-7 E-8893 2-4 E-8982-L 4-20 E-9038 1-123
E-7912 3-7 E-8894 2-4 E-8982-R 4-20 E-9039 1-84
E-7913 3-7 E-8895 2-4 E-8983-L 4-20 E-9040 1-134
E-7914 3-7 E-8896 2-1,2-4 E-8983-R 4-20 E-9041 1-112
E-7915 3-7 E-8897 2-1,2-4 E-8985-L 4-19 E-9042 1-117
E-7916 3-7 E-8898 2-1,2-4 E-8985-R 4-19 E-9043 1-109
E-7917 3-7 E-8899 2-1,2-4 E-8986 4-36 E-9044 1-109
E-8573 5-4 E-8906 1-214 E-8987 4-35 E-9045 1-117
E-8577 2-7 E-8907 1-124 E-8988 4-35 E-9046 1-124
E-8577-BK 2-7 E-8922 1-134 E-8990-L 4-19 E-9047 1-119
E-8578 2-7 E-8923 1-89 E-8990-R 4-19 E-9048 1-86
E-8578-BK 2-7 E-8924 1-135 E-8991 4-34 E-9049 1-135
E-8585 2-8 E-8925 1-89 E-8992-L 4-22 E-9052 1-86
E-8586 2-8 E-8925SHD 1-89 E-8992-R 4-22 E-9053 1-197
E-8587 2-8 E-8927 6-1 E-8993-L 4-22 E-9054 1-134
E-8588 2-8 E-8938 1-120 E-8993-R 4-22 E-9055 1-150,1-162
E-8589 2-8 E-8946-L 4-29 E-8994-L 4-22 E-9056 1-150,1-162
E-8590 2-8 E-8946-R 4-29 E-8994-R 4-22 E-9057 1-153,1-175
E-8591 2-8 E-8947-L 4-26 E-8995-L 4-17 E-9058 1-153,1-175
E-8592 2-8 E-8947-R 4-26 E-8995-R 4-17 E-9059 1-156,1-175
E-8593 2-8 E-8948-L 4-10 E-8996-L 4-16 E-9060 1-156,1-175
E-8594 2-8 E-8948-R 4-10 E-8996-R 4-16 E-9061 1-111
E-8595 2-8 E-8949-L 4-29 E-8997 4-33 E-9062 1-133
E-8596 2-8 E-8949-R 4-29 E-9000-L 4-16 E-9062-77 3-6
E-8597 2-8 E-8950-L 4-32 E-9000-R 4-16 E-9062-78 3-6 8
E-8598 2-8 E-8950-R 4-32 E-9001-L 4-17 E-9062-88 3-6
E-8599 2-8 E-8951-L 4-14 E-9001-R 4-17 E-9063 1-123
E-8600 2-8 E-8951-R 4-14 E-9002-L 4-15 E-9064 1-80
E-8601 2-8 E-8952-L 4-31 E-9002-R 4-15 E-9065 1-146,1-161
E-8602 2-8 E-8952-R 4-31 E-9003-L 4-26 E-9066 1-146,1-161
E-8603 2-8 E-8954-L 4-23 E-9003-R 4-26 E-9067 1-146
E-8604 2-8 E-8954-R 4-23 E-9004-L 4-15 E-9067A 1-146,1-161
E-8605 2-8 E-8955-L 4-23 E-9004-R 4-15 E-9068 1-146
E-8606 2-8 E-8955-R 4-23 E-9005-L 4-15 E-9068A 1-146,1-161
E-8607 2-8 E-8957-L 4-23 E-9005-R 4-15 E-9069 1-124
E-8608 2-8 E-8957-R 4-23 E-9006 4-14 E-9070 1-100
E-8609 2-8 E-8958-L 4-23 E-9007 4-14 E-9071 1-224
E-8610 2-8 E-8958-R 4-23 E-9008-L 4-26 E-9072 1-223
E-8611 2-8 E-8959-L 4-28 E-9008-R 4-26 E-9073 1-225
E-8612 2-8 E-8959-R 4-28 E-9009 4-35 E-9074 1-223
E-8613 2-8 E-8960 4-34 E-9010-L 4-24 E-9075 1-224
E-8614 2-7 E-8961 4-29 E-9010-R 4-24 E-9076 1-225
E-8615 2-7 E-8962 4-29 E-9011-L 4-23 E-9077 1-226
E-8616 2-7 E-8963 4-28 E-9011-R 4-23 E-9078 1-205
E-8617 2-7 E-8964 4-28 E-9012-L 4-3 E-9078HD 1-205
E-8618 2-7 E-8965 4-28 E-9012-R 4-3 E-9078HD-2 1-205
E-8619 2-7 E-8966-L 4-18 E-9020 4-7 E-9079 1-206
E-8620 2-7 E-8966-R 4-18 E-9021 4-6 E-9079HD 1-206
E-8621 2-7 E-8968-L 4-20 E-9022-R 4-6 E-9079HD-2 1-206
E-8622 2-7 E-8968-R 4-20 E-9023 4-48 E-9080 1-206
E-8623 2-7 E-8969-L 4-20 E-9024 4-48 E-9087 1-155,1-176
E-8624 2-7 E-8969-R 4-20 E-9025 1-130 E-9088 1-155,1-176
E-8625 2-7 E-8972-L 4-17 E-9026 1-130 E-9089 1-155,1-172
E-8626 2-7 E-8972-R 4-17 E-9027 1-132 E-9090 1-155,1-172
E-8627 2-7 E-8976-L 4-15 E-9028 1-144,1-158 E-9091 1-152
E-8652 6-1 E-8976-R 4-15 E-9029 1-144,1-158 E-9092 1-152
E-8658 2-10 E-8977-L 4-23 E-9030 1-146,1-158 E-9093 1-154
E-8658-B-BK 2-10 E-8977-R 4-23 E-9031 1-146,1-158 E-9094 1-154
8-7
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-9095A 1-139 E-9282 1-73 E-9676 1-150,1-167 E-9749 1-152,1-180
E-9095AHD 1-139 E-9283 1-76 E-9677 1-150,1-167 E-9750 1-152,1-180
E-9096 1-152,1-184 E-9319 1-258,5-2 E-9678 1-150,1-167 E-9751 1-152,1-180
E-9097 1-152,1-184 E-9320 1-258,5-2 E-9679 1-150,1-168 E-9752 1-152,1-180
E-9098 1-155,1-184 E-9433 5-15 E-9680 1-150,1-168 E-9753 1-154,1-181
E-9099 1-155,1-184 E-9434 5-16 E-9681 1-151,1-168 E-9754 1-154,1-181
E-9100 1-156,1-184 E-9435 5-16 E-9682 1-151,1-168 E-9755 1-154,1-181
E-9101 1-156,1-184 E-9436 5-7 E-9683 1-151,1-168 E-9756 1-154,1-181
E-9102 1-228 E-9509 1-134 E-9684 1-151,1-168 E-9757 1-155,1-181
E-9103 1-228 E-9523-L 4-24 E-9687A 1-146,1-163 E-9758 1-155,1-181
E-9104 1-228 E-9523-R 4-24 E-9688A 1-146,1-163 E-9759 1-155,1-181
E-9105 1-230 E-9524-L 4-24 E-9689A 1-150,1-163 E-9760 1-155,1-181
E-9106 1-231 E-9524-R 4-24 E-9690A 1-150,1-163 E-9761 1-151,1-175
E-9107 2-10 E-9525-L 4-24 E-9691A 1-150,1-163 E-9762 1-151,1-175
E-9107-PL 2-10 E-9525-R 4-24 E-9692A 1-150,1-163 E-9763 1-147,1-162
E-9108 2-10 E-9526 4-35 E-9693 1-144,1-159 E-9764 1-147,1-162
E-9108-PL 2-10 E-9569 6-1 E-9694 1-144,1-159 E-9765 1-148,1-162
E-9109 2-10 E-9575 5-12 E-9695 1-144,1-159 E-9766 1-148,1-162
E-9109-PL 2-10 E-9590 1-213 E-9696 1-144,1-159 E-9767 1-147,1-162
E-9109U 2-10 E-9591 1-213 E-9697 1-145,1-159 E-9768 1-147,1-162
E-9110 2-10 E-9592 1-213 E-9698 1-145,1-159 E-9769 1-149,1-162
E-9111 2-10 E-9593 1-213 E-9699 1-146,1-159 E-9770 1-149,1-162
E-9112 2-3 E-9594 1-213 E-9700 1-146,1-159 E-9771 1-150,1-162
E-9115 2-3 E-9596 1-213 E-9701 1-146,1-159 E-9772 1-150,1-162
E-9116 2-3 E-9597 1-213 E-9702 1-146,1-159 E-9773 3-7
E-9117 2-3 E-9598 1-213 E-9705 1-144,1-160 E-9774 3-7
E-9118 2-3 E-9599 1-213 E-9706 1-144,1-160 E-9775 3-7
E-9120 2-3 E-9600 1-213 E-9707 1-145,1-160 E-9776 3-7
E-9121 2-3 E-9601 1-213 E-9708 1-145,1-160 E-9777 3-7
E-9122 2-3 E-9602 1-213 E-9709 1-151,1-183 E-9778 3-7
E-9124 2-3 E-9643 1-125 E-9710 1-151,1-183 E-9779 3-7
E-9130 2-3 E-9644 1-100 E-9711 1-146,1-160 E-9780 1-136
E-9131 2-3 E-9645 1-144,1-165 E-9712 1-146,1-160 E-9783 1-219
E-9132 1-244 E-9646 1-144,1-165 E-9713 1-144,1-160 E-9784 1-219
E-9133 1-244 E-9647 1-145,1-165 E-9714 1-144,1-160 E-9785A 1-210
E-9134 1-244 E-9648 1-145,1-165 E-9715 1-146,1-160 E-9786A 1-210
E-9135 1-244 E-9649 1-145,1-165 E-9716 1-146,1-160 E-9787A 1-210
E-9136 1-258,5-2 E-9650 1-145,1-165 E-9717 1-147,1-160 E-9788A 1-210
E-9139 1-258,5-2 E-9651 1-146,1-165 E-9718 1-147,1-160 E-9789 1-219
E-9140 1-132 E-9652 1-146,1-165 E-9725 1-152,1-183 E-9790A 1-187
E-9141 1-83 E-9653 1-146,1-165 E-9726 1-152,1-183 E-9790A-2 1-207
E-9142 1-93 E-9654 1-146,1-165 E-9727 1-156,1-184 E-9791 1-199
E-9261 4-42 E-9655 1-147,1-166 E-9728 1-156,1-184 E-9791HD 1-199
E-9262 4-42 E-9656 1-147,1-166 E-9729 1-157,1-185 E-9792A 1-217
E-9263 1-151,1-180 E-9657 1-148,1-166 E-9730 1-157,1-185 E-9793 5-15
E-9264 1-151,1-180 E-9658 1-148,1-166 E-9731 1-152,1-185 E-9837 4-36
E-9265 1-153,1-180 E-9659 1-148,1-166 E-9732 1-152,1-185 E-9868 6-2
E-9266 1-153,1-180 E-9660 1-148,1-166 E-9733 1-154,1-185 E-9868W 6-2
E-9267 1-154,1-180 E-9661 1-148,1-166 E-9734 1-154,1-185 E-10092A 1-245
E-9268 1-154,1-180 E-9662 1-148,1-166 E-9735 1-156,1-185 E-10093A 1-245
E-9269 1-154,1-180 E-9663 1-148,1-166 E-9736 1-156,1-185 E-10094A 1-245
E-9270 1-154,1-180 E-9664 1-148,1-166 E-9737 1-157,1-185 E-10095A 1-245
E-9271 1-154,1-180 E-9665 1-149,1-166 E-9738 1-157,1-185 E-10096A 1-245
E-9272 1-154,1-180 E-9666 1-149,1-166 E-9739 1-153,1-184 E-10097 1-245
E-9273 1-155,1-180 E-9667 1-149,1-167 E-9740 1-153,1-184 E-10097G 1-245
E-9274 1-155,1-180 E-9668 1-149,1-167 E-9741 1-157,1-184 E-10098 1-245
E-9275 1-155,1-180 E-9669 1-149,1-167 E-9742 1-157,1-184 E-10098G 1-245
E-9276 1-155,1-180 E-9670 1-149,1-167 E-9743 1-153,1-178 E-10197 1-125
E-9277 1-156,1-180 E-9671 1-149,1-167 E-9744 1-153,1-178 E-10198 1-127
E-9278 1-156,1-180 E-9672 1-149,1-167 E-9745 1-154,1-178 E-10200-L 4-12
E-9279 1-157,1-180 E-9673A 1-149,1-167 E-9746 1-154,1-178 E-10200-R 4-12
E-9280 1-157,1-180 E-9674A 1-149,1-167 E-9747 1-157,1-179 E-10201-L 4-20
E-9281 1-75 E-9675 1-150,1-167 E-9748 1-157,1-179 E-10201-R 4-20
8-8
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-10202-L 4-20 E-10272-78 3-6 E-10833 1-118 E-10907 1-156,1-182
E-10202-R 4-20 E-10272-88 3-6 E-10834 1-115 E-10908 1-156,1-182
E-10203-L 4-20 E-10273 1-135 E-10835 1-112 E-10909 1-156,1-185
E-10203-R 4-20 E-10306A 1-151,1-168 E-10836 1-120 E-10910 1-156,1-185
E-10206-L 4-20 E-10307A 1-151,1-168 E-10838 1-108 E-10911 1-150,1-162
E-10206-R 4-20 E-10675 4-35 E-10839 1-119 E-10912 1-150,1-162
E-10208-L 4-21 E-10676 4-35 E-10841A 1-78 E-10913 1-151,1-162
E-10208-R 4-21 E-10679 1-76 E-10842 1-118 E-10914 1-151,1-162
E-10209-L 4-20 E-10732 2-11 E-10843 1-224 E-10915 1-151,1-162
E-10209-R 4-20 E-10733 2-11 E-10844 1-137 E-10916 1-151,1-162
E-10210-L 4-21 E-10734 2-11 E-10845 1-223 E-10917 1-151,1-169
E-10210-R 4-21 E-10735 2-11 E-10846 1-188 E-10918 1-151,1-169
E-10213-L 4-31 E-10736 2-11 E-10847 1-136 E-10919 1-153,1-169
E-10213-R 4-31 E-10742 2-11 E-10848 1-221 E-10920 1-153,1-169
E-10214-L 4-31 E-10743 2-11 E-10849 1-222 E-10921 1-154,1-169
E-10214-R 4-31 E-10744 2-11 E-10850 1-137 E-10922 1-154,1-169
E-10215 4-35 E-10745 2-11 E-10851 1-222 E-10923 1-155,1-169
E-10216 4-35 E-10746 2-11 E-10854 1-136 E-10924 1-155,1-169
E-10217 4-35 E-10747 2-11 E-10857 1-224 E-10925 1-155,1-169
E-10218 4-35 E-10756 1-75 E-10859 1-144,1-164 E-10926 1-155,1-169
E-10219 4-35 E-10757 1-75 E-10860 1-144,1-164 E-10927 1-156,1-169
E-10220 4-35 E-10760 1-87 E-10861 1-144,1-164 E-10928 1-156,1-169
E-10221 4-35 E-10762 1-130 E-10862 1-144,1-164 E-10929 1-157,1-170
E-10222 4-35 E-10763 1-130 E-10863 1-144,1-164 E-10930 1-157,1-170
E-10223 4-35 E-10776 1-225 E-10864 1-144,1-164 E-10931 1-213
E-10224-L 4-19 E-10779A 1-244 E-10865 1-118 E-10932 1-213
E-10224-R 4-19 E-10780A 1-244 E-10866A 1-78 E-10933 1-213
E-10225-L 4-19 E-10781A 1-244 E-10867 1-77 E-10934 1-213
E-10225-R 4-19 E-10782A 1-244 E-10868 1-189 E-10935 1-213
E-10226-L 4-19 E-10783A 1-244 E-10869 1-78 E-10936 1-213
E-10226-R 4-19 E-10784A 1-244 E-10870 1-78 E-10937 1-213 8
E-10227-L 4-19 E-10785A 1-244 E-10871 1-189 E-10938 1-213
E-10227-R 4-19 E-10786A 1-244 E-10872 1-189 E-10939 1-213
E-10228-L 4-19 E-10787A 1-244 E-10875 1-73 E-10940 1-213
E-10228-R 4-19 E-10788A 1-244 E-10876 1-130 E-10941 1-213
E-10229 4-20 E-10789A 1-244 E-10877 1-130 E-10942 1-213
E-10230 4-20 E-10790 2-70 E-10878 1-130 E-10943 1-213
E-10234 4-6 E-10791 2-70 E-10879-BK 1-245 E-10944 1-213
E-10235 4-6 E-10800 1-223 E-10880-BK 1-245 E-10945 1-213
E-10236 4-41 E-10801 1-224 E-10881-BK 1-245 E-10946 1-214
E-10237 4-78 E-10802 1-131 E-10882-BK 1-245 E-10947 1-214
E-10238 4-78 E-10803 1-131 E-10883-BK 1-245 E-10949A 1-243
E-10239 1-107 E-10804 1-131 E-10884-BK 1-245 E-10950A 1-243
E-10242 4-35 E-10805 1-131 E-10885 1-245 E-10952 1-245
E-10243 1-139 E-10809 1-131 E-10886 1-245 E-109994 2-43
E-10244 1-86 E-10810 1-131 E-10887-BK 1-245 E-11003 5-8
E-10244S 1-86 E-10811 1-127 E-10888-BK 1-245 E-11318 1-85
E-10249-L 4-19 E-10812 1-107 E-10889-BK 1-245 E-11319 1-87
E-10249-R 4-19 E-10813 1-119 E-10890-BK 1-245 E-11395 1-233
E-10253-L 4-2 E-10814 1-112 E-10891 1-245 E-11396 1-233
E-10253-R 4-2 E-10816 1-117 E-10892 1-236 E-11397 1-233
E-10254-L 4-3 E-10817 1-118 E-10893 1-236 E-11398 1-233
E-10254-R 4-3 E-10818 1-122 E-10894 1-240 E-11399 1-233
E-10256 4-36 E-10819 1-115 E-10895 1-144,1-164 E-11400 1-233
E-10257 4-36 E-10820 1-112 E-10896 1-144,1-164 E-11401 1-233
E-10258-L 4-30 E-10822 1-127 E-10897 1-193 E-11402 1-233
E-10258-R 4-30 E-10823 1-108 E-10899 1-148,1-170 E-11403 1-233
E-10259-L 4-30 E-10824 1-108 E-10900 1-148,1-170 E-11404 1-233
E-10259-R 4-30 E-10825 1-113 E-10901 1-154,1-182 E-11405 1-233
E-10262 1-240 E-10826 1-122 E-10902 1-154,1-182 E-11406 1-233
E-10270 1-135 E-10828 1-121 E-10903 1-154,1-182 E-11407 1-233
E-10271 1-135 E-10829 1-115 E-10904 1-154,1-182 E-11408 1-233
E-10272 1-135 E-10831 1-118 E-10905 1-155,1-182 E-11409 1-233
E-10272-77 3-6 E-10832 1-118 E-10906 1-155,1-182 E-11410 1-233
8-9
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-11411 1-233 E-11542 1-147,1-166 E-11606 1-144,1-165 E-11667-L 4-23
E-11412 1-233 E-11543 1-147,1-166 E-11607 1-144,1-165 E-11667-R 4-23
E-11413 1-233 E-11544 1-147,1-166 E-11608 1-145,1-165 E-11668-L 4-23
E-11414 1-233 E-11545 1-147,1-166 E-11609 1-145,1-165 E-11668-R 4-23
E-11415 1-233 E-11546 1-148,1-166 E-11610 1-146,1-165 E-11669-L 4-24
E-11416 1-233 E-11547 1-148,1-166 E-11611 1-146,1-165 E-11669-R 4-24
E-11417 1-233 E-11548 1-148,1-161 E-11612 1-146,1-165 E-11672-L 4-26
E-11418 1-233 E-11549 1-148,1-161 E-11613 1-146,1-165 E-11672-R 4-26
E-11419 1-233 E-11550 1-148,1-161 E-11614 1-147,1-166 E-11673-L 4-23
E-11420 1-233 E-11551 1-148,1-161 E-11615 1-147,1-166 E-11673-R 4-23
E-11421 1-233 E-11552 1-148,1-166 E-11616 1-148,1-166 E-11674-L 4-26
E-11422 1-233 E-11553 1-148,1-166 E-11617 1-148,1-166 E-11674-R 4-26
E-11423 1-233 E-11554 1-149,1-166 E-11618 1-148,1-166 E-11675-L 4-27
E-11424 1-233 E-11555 1-149,1-166 E-11619 1-148,1-166 E-11675-R 4-27
E-11425 1-233 E-11556 1-149,1-166 E-11622 1-148,1-166 E-11676-L 4-26
E-11426 1-233 E-11557 1-149,1-166 E-11623 1-148,1-166 E-11676-R 4-26
E-11427A 1-234 E-11558 1-149,1-167 E-11624 1-149,1-166 E-11677-L 4-27
E-11428A 1-234 E-11559 1-149,1-167 E-11625 1-149,1-166 E-11677-R 4-27
E-11429A 1-234 E-11560 1-149,1-166 E-11626 1-149,1-167 E-11678-L 4-27
E-11430A 1-234 E-11561 1-149,1-166 E-11627 1-149,1-167 E-11678-R 4-27
E-11431 1-234 E-11562 1-149,1-167 E-11628 1-149,1-167 E-11680-L 4-23
E-11432 1-234 E-11563 1-149,1-167 E-11629 1-149,1-167 E-11680-R 4-23
E-11445 1-209 E-11564 1-149,1-167 E-11630 1-150,1-167 E-11681-L 4-23
E-11446 1-209 E-11565 1-149,1-167 E-11631 1-150,1-167 E-11681-R 4-23
E-11449 1-217 E-11566 1-149,1-161 E-11632 1-150,1-167 E-11682-L 4-23
E-11450 1-198 E-11567 1-149,1-161 E-11633 1-150,1-167 E-11682-R 4-23
E-11450HD 1-198 E-11568 1-150,1-167 E-11634 1-150,1-168 E-11684-L 4-31
E-11450HD-2 1-199 E-11569 1-150,1-167 E-11635 1-150,1-168 E-11684-R 4-31
E-11451 1-221 E-11570 1-150,1-167 E-11636 1-151,1-168 E-11685-L 4-31
E-11453 1-133 E-11571 1-150,1-167 E-11637 1-151,1-168 E-11685-R 4-31
E-11454 1-133 E-11572 1-150,1-167 E-11638 1-151,1-168 E-11686-L 4-31
E-11455 1-133 E-11573 1-150,1-167 E-11639 1-151,1-168 E-11686-R 4-31
E-11456 1-133 E-11574 1-150,1-167 E-11640 1-151,1-168 E-11687-L 4-31
E-11493 1-83 E-11575 1-150,1-167 E-11641 1-151,1-168 E-11687-R 4-31
E-11512 1-144,1-165 E-11576 1-150,1-168 E-11642 1-153,1-169 E-11692 4-33
E-11513 1-144,1-165 E-11577 1-150,1-168 E-11643 1-153,1-169 E-11693 4-33
E-11514 1-144,1-165 E-11578 1-150,1-168 E-11644 1-154,1-169 E-11695-L 4-16
E-11515 1-144,1-165 E-11579 1-150,1-168 E-11645 1-154,1-169 E-11695-R 4-16
E-11516 1-145,1-165 E-11580 1-151,1-168 E-11646 4-37 E-11696-L 4-17
E-11517 1-145,1-165 E-11581 1-151,1-168 E-11647 4-37 E-11696-R 4-17
E-11518 1-145,1-165 E-11582 1-151,1-168 E-11648 4-37 E-11697-L 4-16
E-11519 1-145,1-165 E-11583 1-151,1-168 E-11649 4-37 E-11697-R 4-16
E-11520 1-145,1-161 E-11584 1-151,1-168 E-11650 4-37 E-11699-L 4-16
E-11521 1-145,1-161 E-11585 1-151,1-168 E-11651 4-37 E-11699-R 4-16
E-11522 1-145,1-161 E-11586 1-151,1-168 E-11652 4-37 E-11701 4-34
E-11523 1-145,1-161 E-11587 1-151,1-168 E-11654 4-37 E-11702 4-34
E-11524 1-145,1-165 E-11588 1-151,1-168 E-11655 4-37 E-11703 4-33
E-11525 1-145,1-165 E-11589 1-151,1-168 E-11657 4-39 E-11704 4-34
E-11526 1-146,1-165 E-11590 1-151,1-168 E-11658-L 4-23 E-11705 4-34
E-11527 1-146,1-165 E-11591 1-151,1-168 E-11658-R 4-23 E-11706 4-33
E-11528 1-147,1-165 E-11592 1-152,1-168 E-11659-L 4-26 E-11707 4-33
E-11529 1-147,1-165 E-11593 1-152,1-168 E-11659-R 4-26 E-11708 4-34
E-11530 1-147,1-165 E-11594 1-152,1-168 E-11660-L 4-23 E-11709 4-33
E-11531 1-147,1-165 E-11595 1-152,1-168 E-11660-R 4-23 E-11710 4-34
E-11532 1-147,1-165 E-11596 1-152,1-168 E-11661-L 4-26 E-11712 4-33
E-11533 1-147,1-165 E-11597 1-152,1-168 E-11661-R 4-26 E-11713 4-34
E-11534 1-147,1-165 E-11598 1-152,1-168 E-11662-L 4-26 E-11714 4-34
E-11535 1-147,1-165 E-11599 1-152,1-168 E-11662-R 4-26 E-11715 4-34
E-11536 1-147,1-166 E-11600 1-152,1-169 E-11664-L 4-23 E-11716 4-34
E-11537 1-147,1-165 E-11601 1-152,1-169 E-11664-R 4-23 E-11717 4-34
E-11538 1-147,1-161 E-11602 1-153,1-169 E-11665-L 4-26 E-11718 4-34
E-11539 1-147,1-161 E-11603 1-153,1-169 E-11665-R 4-26 E-11719 4-35
E-11540 1-147,1-166 E-11604 1-153,1-169 E-11666-L 4-23 E-11721-L 4-9
E-11541 1-147,1-166 E-11605 1-153,1-169 E-11666-R 4-23 E-11721-R 4-9
8-10
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-11722-L 4-9 E-11981 1-79 E-BN101437X 2-56 E-BN107917X 2-25
E-11722-R 4-9 E-11982 1-132 E-BN101450X 2-66 E-BN108066X 2-19
E-11723-L 4-9 E-11983 2-3 E-BN101569X 2-56 E-BN108076X 2-97
E-11723-R 4-9 E-11984 2-3 E-BN101570X 2-56 E-BN108110X 2-19
E-11724 4-32 E-11985 2-3 E-BN101818X 2-61 E-BN108277X 2-19
E-11725 4-32 E-11986 2-3 E-BN101900X 2-41 E-BN108329X 2-38
E-11741 1-107 E-11987 2-3 E-BN102213X 2-22 E-BN109604X 2-25
E-11747 1-82 E-11989 2-1,2-4 E-BN102598X 2-22 E-BN227320X 2-17
E-11794 3-7 E-11990 2-1,2-4 E-BN102626N 2-77 E-BN227321X 2-17
E-11795 3-7 E-11991 2-3 E-BN102626X 2-77 E-BN227322X 2-17
E-11796 3-7 E-11992 2-3 E-BN102697X 2-37 E-BN227323X 2-17
E-11797 3-7 E-824100 6-3 E-BN102761X 2-97 E-BN227326X 2-36
E-11798 3-7 E-824101 6-3 E-BN102953X 2-38 E-BN227331X 2-22
E-11799 3-7 E-824102 6-3 E-BN102989X 2-22 E-BN227332X 2-22
E-11800 3-7 E-824103 6-3 E-BN103009N 2-79 E-BN227355X 2-74
E-11801 3-7 E-824104 6-3 E-BN103009X 2-79 E-BN227356X 2-74
E-11802 3-7 E-824105 6-3 E-BN103010N 2-78 E-BN227357X 2-74
E-11803 3-7 E-824106 6-3 E-BN103010X 2-78 E-BN227400X 2-16
E-11804 3-7 E-12SD300R 2-2 E-BN103028N 2-79,2-83 E-BN227401X 2-16
E-11805 3-7 E-BC12S 2-4 E-BN103028X 2-79,2-83 E-BN227402X 2-16
E-11806 3-7 E-BC16S 2-4 E-BN103061X 2-97 E-BN227403X 2-16
E-11807 3-7 E-BC2024C 2-4 E-BN103081X 2-94 E-BN227406X 2-15
E-11856 1-155,1-185 E-BC2024P 2-4 E-BN103139X 2-78 E-BN227407X 2-15
E-11857 1-155,1-185 E-BC20S 2-4 E-BN103195X 2-79 E-BN227408X 2-21
E-11858 1-155,1-185 E-BC2424C-L 2-4 E-BN103211X 2-19 E-BN227409X 2-21
E-11859 1-155,1-185 E-BC2424P 2-4 E-BN103212X 2-21 E-BN227410X 2-21
E-11860 1-157,1-185 E-BC2430C-EL 2-4 E-BN103274X 2-25 E-BN227661X 2-105
E-11861 1-157,1-185 E-BC2430C-L 2-4 E-BN103278X 2-26 E-BN227672X 2-105
E-11862 1-157,1-185 E-BC2430P-L 2-4 E-BN103294X 2-78 E-BN227870N 2-44
E-11863 1-157,1-185 E-BC24S 2-4 E-BN103833X 2-79,2-83 E-BN227871N 2-44
E-11864 1-148,1-170 E-BC24S-EL 2-4 E-BN103835X 2-78 E-BN228050X 2-45 8
E-11865 1-148,1-170 E-BC3030C 2-4 E-BN103912X 2-77 E-BN228141X 2-16
E-11866 1-148,1-170 E-BC3030C-EL 2-4 E-BN103976X 2-67 E-BN228165X 2-45
E-11867 1-148,1-170 E-BC3030P 2-4 E-BN104039X 2-19 E-BN228346X 2-16
E-11872 1-244 E-BC3030P-EL 2-4 E-BN104041X 2-19 E-BN228366X 2-23
E-11873 1-244 E-BC3036C 2-4 E-BN104042X 2-26 E-BN228429X 2-58
E-11875 1-244 E-BC3036P 2-4 E-BN104102X 2-29 E-BN228430X 2-58
E-11877 1-244 E-BC30S 2-4 E-BN104103X 2-29 E-BN228443X 2-28
E-11879 1-244 E-BC30S-EL 2-4 E-BN104165X 2-79 E-BN228479X 2-17
E-11880 1-244 E-BC3636C 2-4 E-BN104345X 2-78 E-BN228520X 2-45
E-11881 1-244 E-BC3636P 2-4 E-BN104358X 2-42 E-BN228600N 2-104
E-11882 1-244 E-BC36S 2-4 E-BN104561X 2-77 E-BN228600X 2-104
E-11883 1-244 E-BN065041X 2-41 E-BN104583X 2-39 E-BN228750N 2-104
E-11884 1-244 E-BN065044X 2-42 E-BN104584X 2-39 E-BN228750X 2-104
E-11885 1-244 E-BN065104X 2-77 E-BN104598X 2-73 E-BN228762X 2-54
E-11888 2-4 E-BN065125X 2-79 E-BN106268X 2-32 E-BN229078X 2-24
E-11889 2-4 E-BN065145X 2-73 E-BN106313X 2-79,2-83 E-BN229434X 2-93
E-11890 1-244 E-BN065146X 2-73 E-BN107506X 2-29 E-BN229467X 2-75
E-11897 1-199 E-BN065156X 2-56 E-BN107507X 2-29 E-BN229493X 2-45
E-11898 1-234 E-BN065157X 2-56 E-BN107508X 2-25 E-BN229500X 2-59
E-11899 1-234 E-BN065225X 2-42 E-BN107509X 2-25 E-BN229501X 2-59
E-11900 1-234 E-BN065313X 2-63 E-BN107510X 2-38 E-BN229505X 2-72
E-11901 1-234 E-BN065437X 2-103 E-BN107511X 2-38 E-BN229507X 2-72
E-11902 1-233 E-BN065438X 2-103 E-BN107512X 2-34 E-BN229509X 2-72
E-11904 1-191 E-BN065439X 2-103 E-BN107513X 2-34 E-BN229525X 2-28
E-11910 1-186 E-BN101100X 2-62 E-BN107514X 2-19 E-BN229608X 2-53
E-11921 1-239 E-BN101135X 2-69 E-BN107539X 2-97 E-BN229635N 2-53
E-11922 1-239 E-BN101142X 2-16 E-BN107622X 2-34 E-BN229635X 2-53
E-11923 1-239 E-BN101158X 2-34 E-BN107623X 2-34 E-BN229813X 2-70
E-11924 1-239 E-BN101242X 2-16 E-BN107794X 2-43 E-BN229844X 2-70
E-11925 1-239 E-BN101256X 2-17 E-BN107813X 2-34 E-BN229859N 2-70
E-11926 1-239 E-BN101282X 2-32 E-BN107866X 2-19 E-BN229859X 2-70
E-11951 1-216 E-BN101311X 2-74 E-BN107869X 2-38 E-BN229860N 2-70
E-11980 1-123 E-BN101333X 2-77 E-BN107896X 2-43 E-BN229860X 2-70
8-11
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-BN229990X 2-40 E-BN280613X 2-17 E-BN286537X 2-22 E-BN288323X 2-67
E-BN275317X 2-15 E-BN280622X 2-28 E-BN286538X 2-33 E-BN288369X 2-76
E-BN275491N 2-13 E-BN280626X 2-28 E-BN286539X 2-33 E-BN288383X 2-61
E-BN275491X 2-13 E-BN280628X 2-37 E-BN286540X 2-33 E-BN288586X 2-66
E-BN275777X 2-32 E-BN280651X 2-75 E-BN286542X 2-34 E-BN288605X 2-107
E-BN276166X 2-31 E-BN280758X 2-66 E-BN286543X 2-34 E-BN288645X 2-107
E-BN276270X 2-64 E-BN280774X 2-36 E-BN286544X 2-37 E-BN288746N 2-48
E-BN276272X 2-64 E-BN280904X 2-53 E-BN286546X 2-25 E-BN288746X 2-48
E-BN276462X 2-48 E-BN280905X 2-53 E-BN286548X 2-25 E-BN289144N 2-74
E-BN276566N 2-47 E-BN281024X 2-70 E-BN286549X 2-25 E-BN289148X 2-74
E-BN276566X 2-47 E-BN281042X 2-32 E-BN286550X 2-25 E-BN289182X 2-72
E-BN276567N 2-47 E-BN281112X 2-31 E-BN286551X 2-25 E-BN289259X 2-50
E-BN276567X 2-47 E-BN281157X 2-36 E-BN286552X 2-25 E-BN289336X 2-26
E-BN276777X 2-40 E-BN281318X 2-66 E-BN286554X 2-28 E-BN289339X 2-28
E-BN276778X 2-31 E-BN281587X 2-47 E-BN286555X 2-28 E-BN289340X 2-39
E-BN276961X 2-32 E-BN281860X 2-93 E-BN286556X 2-23 E-BN289342X 2-34
E-BN276962X 2-32 E-BN281865N 2-93 E-BN286558X 2-24 E-BN289348X 2-37
E-BN276974X 2-28 E-BN281865X 2-93 E-BN286560X 2-18 E-BN289349X 2-24
E-BN277122X 2-37 E-BN281923X 2-57 E-BN286561X 2-24 E-BN289350X 2-17
E-BN277144X 2-69 E-BN282013X 2-32 E-BN286562X 2-24 E-BN289477X 2-48
E-BN277214X 2-69 E-BN282025X 2-24 E-BN286563X 2-40 E-BN289512X 2-48
E-BN277226X 2-67 E-BN282076X 2-17 E-BN286565X 2-23 E-BN289688X 2-16
E-BN277227X 2-67 E-BN282368X 2-55 E-BN286566X 2-25 E-BN289744X 2-26
E-BN277340X 2-66 E-BN282381X 2-55 E-BN286567X 2-18 E-BN289789X 2-32
E-BN277446X 2-93 E-BN282586X 2-36 E-BN286571X 2-37 E-BN289790X 2-33
E-BN277694X 2-17 E-BN282621X 2-36 E-BN286572X 2-37 E-BN289915X 2-33
E-BN277730X 2-24 E-BN283040X 2-54 E-BN286574X 2-38 E-BN289924X 2-22
E-BN277731X 2-24 E-BN283429X 2-15 E-BN286576X 2-22 E-BN289925X 2-32
E-BN277863X 2-59 E-BN283506X 2-23 E-BN286579X 2-33 E-BN289941X 2-32
E-BN277901X 2-36 E-BN283513X 2-24 E-BN286580X 2-18 E-BN289964X 2-33
E-BN278426X 2-69 E-BN283514X 2-23 E-BN286581X 2-33 E-CU3049186X 2-30
E-BN278445X 2-32 E-BN283577X 2-37 E-BN286582X 2-18 E-CUBM69973-12N
E-BN278604X 2-36 E-BN283690X 2-17 E-BN286585X 2-22 2-112
E-BN278614X 2-45 E-BN283692X 2-37 E-BN286586X 2-18 E-CUBM69973-12X
E-BN278615X 2-45 E-BN283935X 2-54 E-BN286589X 2-18 2-112
E-BN278825X 2-69 E-BN283940X 2-75 E-BN286591X 2-18 E-CUBM69973-24N
E-BN278998X 2-59 E-BN284106X 2-32 E-BN286592X 2-18 2-112
E-BN279000N 2-106 E-BN284260X 2-35 E-BN286595X 2-18 E-CUBM69973-24X
E-BN279000X 2-106 E-BN284307X 2-36 E-BN286623X 2-33 2-112
E-BN279024X 2-15 E-BN284310X 2-35 E-BN286773X 2-61 E-FU16743N 2-116
E-BN279025X 2-15 E-BN284358N 2-13 E-BN286775X 2-61 E-FU16859N 2-116
E-BN279176X 2-15 E-BN284358X 2-13 E-BN286875X 2-41 E-FU19974N 2-116
E-BN279180N 2-75 E-BN284662X 2-36 E-BN286934X 2-41 E-FUA3546N 2-113
E-BN279180X 2-75 E-BN284699X 2-28 E-BN287114X 2-76 E-FUA3546X 2-113
E-BN279416N 2-104 E-BN284714X 2-28 E-BN287224X 2-76 E-FUA3547X 2-114
E-BN279416X 2-104 E-BN284718X 2-28 E-BN287238N 2-50 E-FUA3991X 2-114
E-BN279750X 2-62 E-BN284744X 2-49 E-BN287238X 2-50 E-FUA4487N 2-115
E-BN279787X 2-48 E-BN284760X 2-61 E-BN287240X 2-50 E-FUA4490N 2-115
E-BN279950X 2-59 E-BN284795X 2-57 E-BN287260X 2-76 E-FUA4491N 2-115
E-BN279952X 2-75 E-BN284959X 2-28 E-BN287376X 2-97 E-FUA4688N 2-114
E-BN279962X 2-106 E-BN285108X 2-36 E-BN287411X 2-61 E-FUA4688X 2-114
E-BN279995X 2-35 E-BN285252X 2-32 E-BN287417X 2-47 E-FUA4900N 2-114
E-BN280243X 2-75 E-BN286171X 2-63 E-BN287418X 2-50 E-FUA5010N 2-115
E-BN280369X 2-32 E-BN286364X 2-97 E-BN287564X 2-61 E-FUA5015N 2-115
E-BN280375X 2-75 E-BN286370X 2-76 E-BN287637X 2-47 E-GC2024 2-1
E-BN280454X 2-48 E-BN286371X 2-76 E-BN288063X 2-97 E-GC2424 2-1
E-BN280556X 2-36 E-BN286526X 2-18 E-BN288239N 2-49 E-GC2424-LS 2-1
E-BN280602X 2-17 E-BN286527X 2-18 E-BN288239X 2-49 E-GC2430 2-1
E-BN280603X 2-17 E-BN286528X 2-18 E-BN288240X 2-49 E-GC2430-LS 2-1
E-BN280604X 2-17 E-BN286529X 2-18 E-BN288241N 2-49 E-GC3030 2-1
E-BN280608X 2-36 E-BN286530X 2-18 E-BN288241X 2-49 E-GC3036 2-1
E-BN280609X 2-32 E-BN286532X 2-18 E-BN288242X 2-49 E-GC3636 2-1
E-BN280610X 2-22 E-BN286533X 2-18 E-BN288251X 2-70 E-GP1624 2-1
E-BN280611X 2-22 E-BN286536X 2-22 E-BN288301X 2-106 E-GP2024 2-1
8-12
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-GP2424 2-1 E-MDKN22140X 2-64 E-SL1000-5A 2-95 E-SL110405 2-61
E-GP2424-LS 2-1 E-MDKN22150X 2-64 E-SL1000-5AX 2-95 E-SL110410 2-90
E-GP2430 2-1 E-MDKN26000N 2-98 E-SL10200-1/2 2-45 E-SL110412 2-90
E-GP2430-LS 2-1 E-MDKN26000X 2-98 E-SL10200-3/4 2-45 E-SL110413 2-55
E-GP3030 2-1 E-MDKN26010X 2-98 E-SL102001 2-45 E-SL110415 2-90
E-GP3036 2-1 E-MDKN28010X 2-78 E-SL102002 2-45 E-SL110415X 2-90
E-GP3636 2-1 E-MDKN28011X 2-78 E-SL10200-3/8 2-45 E-SL110416 2-90
E-INT3030C-1 2-4 E-MDKN28030X 2-98 E-SL102006-1/2 2-46 E-SL110425 2-61
E-INT3030C-1EL 2-4 E-MDKN28060N 2-81 E-SL102006-3/8 2-46 E-SL110430 2-61
E-INT3030C-2 2-4 E-MDKN28060X 2-81 E-SL10300-12 2-110 E-SL110435 2-61
E-INT3030C-2EL 2-4 E-MDKN28061X 2-81 E-SL10900 2-110 E-SL110440 2-61
E-KH5453X 2-87 E-MDKN28065X 2-81 E-SL110103 2-55 E-SL110445 2-61
E-KH5454X 2-87 E-MDKN28071X 2-80 E-SL110114 2-51 E-SL110450 2-89
E-KH5455X 2-87 E-MDKN28080X 2-82 E-SL110127 2-112 E-SL110459 2-96
E-KH5459X 2-87 E-MDKN28085X 2-82 E-SL110128 2-47 E-SL110459X 2-96
E-KH5460X 2-87 E-MDKN28130X 2-82 E-SL110129 2-47 E-SL110460 2-96
E-KH5461X 2-87 E-MDKN28131X 2-83 E-SL110130 2-47 E-SL110460X 2-96
E-KH5462X 2-87 E-MDKN28132X 2-81 E-SL110131 2-47 E-SL110470 2-96
E-KH5468X 2-88 E-MDKN28140X 2-80 E-SL110139 2-89 E-SL110475 2-96
E-KH5470X 2-87 E-MDKN28300X 2-80 E-SL110139X 2-89 E-SL110475X 2-96
E-LC3030 2-1 E-MDKN28500N 2-84 E-SL110167 2-55 E-SL110486 2-110
E-LP3030 2-1 E-MDKN28500X 2-84 E-SL110170 2-101 E-SL110500 2-102
E-MD12345X 2-86 E-MDKN28510N 2-84 E-SL110170X 2-101 E-SL110500X 2-102
E-MD12346X 2-86 E-MDKN28510X 2-84 E-SL110171 2-101 E-SL110507 2-91
E-MD12360X 2-99 E-MDKN28520N 2-84 E-SL110171X 2-101 E-SL110507X 2-91
E-MDEL13020X 2-21 E-MDKN28520X 2-84 E-SL110183 2-44 E-SL110514 2-51
E-MDEL13022X 2-21 E-MDKN28600N 2-103 E-SL110189 2-51 E-SL110528 2-51
E-MDEL13040X 2-31 E-MDKN28600X 2-103 E-SL110191 2-101 E-SL110542 2-104
E-MDEL13050X 2-35 E-MDKN28601X 2-103 E-SL110191X 2-101 E-SL110544 2-104
E-MDEL13051X 2-35 E-MDKN30010NX 2-94 E-SL110197 2-91 E-SL110570 2-92
E-MDEL13053X 2-35 E-MDKN30010X 2-94 E-SL110197X 2-91 E-SL110571 2-92 8
E-MDEL13060X 2-21 E-MDKN30100X 2-94 E-SL110198 2-91 E-SL110580 2-91
E-MDEL13080X 2-27 E-MDKN30200X 2-94 E-SL110199 2-91 E-SL110582 2-91
E-MDEL13090X 2-35 E-MDKN30300X 2-94 E-SL110199X 2-91 E-SL110584 2-89
E-MDEL13100X 2-35 E-MDKN30400X 2-94 E-SL110200 2-96 E-SL110584X 2-89
E-MDEL13111X 2-39 E-MDKN31000X 2-68 E-SL110200X 2-96 E-SL110588 2-91
E-MDEL13120X 2-27 E-MDKN31010X 2-68 E-SL110205 2-96 E-SL110605 2-91
E-MDEL13151X 2-27 E-MDKN31060X 2-70 E-SL110205X 2-96 E-SL110606 2-92
E-MDEL13170X 2-27 E-MDKN31070X 2-70 E-SL110207 2-88 E-SL110644 2-51
E-MDEL13200X 2-27 E-MDKN31080X 2-70 E-SL110207X 2-88 E-SL110690 2-92
E-MDEL14111X 2-40 E-MDKN32000X 2-71 E-SL110250 2-110 E-SL110690X 2-92
E-MDEL16040X 2-31 E-MDKN32010X 2-71 E-SL110252 2-51 E-SL110700 2-102
E-MDEL16050X 2-35 E-MDKN32020X 2-71 E-SL110257 2-68 E-SL110700X 2-102
E-MDEL16053X 2-35 E-MDKN32040X 2-72 E-SL110258 2-68 E-SL110742 2-104
E-MDEL16060X 2-21 E-MDKN34030X 2-109 E-SL110267 2-96 E-SL110744 2-104
E-MDEL16080X 2-27 E-MDKN34050X 2-108 E-SL110268 2-96 E-SL110790 2-91
E-MDEL16100X 2-35 E-MDKN34070X 2-108 E-SL110274 2-51 E-SL110790X 2-91
E-MDEL16111X 2-39 E-MDKN34080X 2-108 E-SL110275 2-91 E-SL110800 2-102
E-MDEL16120X 2-27 E-MDKN34090X 2-108 E-SL110275X 2-91 E-SL140200 2-68
E-MDEL16200X 2-27 E-MDKN68230N 2-112 E-SL110284 2-51 E-SL140270 2-68
E-MDKN18511X 2-13 E-MDKN68237N 2-112 E-SL110297 2-61 E-SL140280 2-68
E-MDKN18530X 2-14 E-MDKN7000X 2-19 E-SL110300 2-55 E-SL140290 2-68
E-MDKN18531X 2-14 E-MDKN7010X 2-20 E-SL110301 2-55 E-SL140370 2-68
E-MDKN20000X 2-54 E-MDKN7020X 2-20 E-SL110338 2-96 E-SL140380 2-68
E-MDKN20010X 2-51 E-MDKN7030X 2-20 E-SL110360 2-90 E-SL140390 2-68
E-MDKN20040X 2-54 E-MDKN7060X 2-35 E-SL110365 2-90 E-SL14900 2-110
E-MDKN20050X 2-54 E-MDKN7070X 2-35 E-SL110370X 2-92 E-SL17600 2-52
E-MDKN20060X 2-51 E-MDKN7080X 2-35 E-SL110375X 2-92 E-SL17600B 2-52
E-MDKN20070X 2-56 E-MDKN86020X 2-20 E-SL110376 2-92 E-SL17600B-2 2-52
E-MDKN20071X 2-65 E-MDKNT86230X 2-31 E-SL110380 2-90 E-SL17600L 2-52
E-MDKN20580X 2-65 E-PB0912 2-2 E-SL110380X 2-90 E-SL17600LB 2-52
E-MDKN20581X 2-65 E-PB0916 2-2 E-SL110385 2-90 E-SL17600LG 2-52
E-MDKN20590X 2-65 E-PB1212 2-2 E-SL110390 2-110 E-SL17600LR 2-52
E-MDKN22100X 2-60 E-PB1216 2-2 E-SL110400 2-61 E-SL17600M 2-52
8-13
Numerical Parts Listing
Part No Page Part No Page Part No Page Part No Page
E-SL200000 2-71 E-SL780212 2-113 E-X5480-77 3-8
E-SL200001 2-71 E-SL8000 2-105 E-X5480-78 3-8
E-SL200002 2-71 E-SL8000B 2-105 E-X5480-88 3-8
E-SL200003 2-71 E-SL8100 2-105 E-X5503-77 3-8
E-SL200004 2-71 E-SL8100B 2-105 E-X5503-78 3-8
E-SL2000B1/2 2-71 E-SL9125 2-88 E-X5503-88 3-8
E-SL2000B3/8 2-71 E-SL9400 2-69 E-X5528-78 3-8
E-SL2000C1/2 2-71 E-SL940000 2-69 E-X5528-88 3-8
E-SL2000C3/8 2-71 E-SL996-5 2-52 E-X9027-78 3-8
E-SL2000D1/2 2-71 E-SL99600 2-52 E-X9027-88 3-8
E-SL2000D3/8 2-71 E-SL99600-5 2-52 E-X9062-77 3-8
E-SL21600 2-55 E-SL99600B 2-52 E-X9062-78 3-8
E-SL21600-2 2-55 E-SL99600BL 2-52 E-X9062-88 3-8
E-SL21600D 2-55 E-SLA1000S 2-95 E-XK554515F3 3-9
E-SL216050 2-55 E-SLA1000SX 2-95 E-XK554515P 3-9
E-SL216200 2-55 E-SLA256-5 2-53 E-XK554515Q 3-9
E-SL220000 2-44 E-SLA25600 2-53 E-XK774311E 3-9
E-SL22001/2 2-44 E-SLA25600-2 2-53 E-XK774515F3 3-9
E-SL22001/4 2-44 E-SLA25600Y 2-53 E-XK774515P 3-9
E-SL22003/4 2-44 E-SN401004 2-113 E-XK774515Q 3-9
E-SL220100 2-44 E-SN401018 2-46 E-XK774702QP 3-9
E-SL2550 2-66 E-SN401019 2-47 E-XK774707QP 3-9
E-SL3100 2-89 E-SN401029 2-57 E-XK774709E1 3-9
E-SL3200 2-46 E-SN401037X 2-51 E-XK774709E2 3-9
E-SL3200-1/4 2-46 E-SN401040 2-57 E-XK781308E 3-9
E-SL320100 2-46 E-SN401045 2-58 E-XK781308Q 3-9
E-SL340250 2-52 E-SN401046 2-58 E-XK781443E 3-9
E-SL340350 2-52 E-SN401047 2-58 E-XK784311E 3-9
E-SL342500 2-52 E-SN401056 2-58 E-XK784515F3 3-9
E-SL342501 2-52 E-SN401075 2-58 E-XK784515P 3-9
E-SL342502 2-52 E-SN401084 2-57 E-XK784515Q 3-9
E-SL3450 2-52 E-SN401095 2-58 E-XK784702QP 3-9
E-SL3450G 2-52 E-WAA103600X 2-84 E-XK784707QP 3-9
E-SL3450S 2-52 E-WAA80070X 2-85 E-XK784709E1 3-9
E-SL3800 2-73 E-WAA83034X 2-50 E-XK784709E2 3-9
E-SL5200 2-46 E-WAA85490X 2-85 E-XK881308E 3-9
E-SL5400 2-55 E-WAA85493X 2-85 E-XK881308Q 3-9
E-SL5900 2-65 E-WAA86473X 2-84 E-XK881443E 3-9
E-SL5900-1 2-65 E-WAA86477X 2-84 E-XK884311E 3-9
E-SL5900B 2-65 E-WAA88802X 2-99 E-XK884515F3 3-9
E-SL5900G 2-65 E-WAA88812X 2-99 E-XK884515P 3-9
E-SL5900GI 2-65 E-WAA97600X 2-86 E-XK884515Q 3-9
E-SL5900L 2-65 E-WAA98730X 2-100 E-XK884702QP 3-9
E-SL5900R 2-65 E-WAA99370X 2-100 E-XK884707QP 3-9
E-SL6002 2-113 E-X10272-77 3-8 E-XK884709E1 3-9
E-SL6003 2-113 E-X10272-78 3-8 E-XK884709E2 3-9
E-SL6006 2-113 E-X10272-88 3-8 KIT-1 1-101
E-SL6125 2-60 E-X1778-77 3-8 KIT-4HD 1-98
E-SL6125-2 2-60 E-X1778-78 3-8 KIT-4S 1-99
E-SL6125-25 2-60 E-X1778-88 3-8 KIT-4SHD 1-99
E-SL6125-35 2-60 E-X2241-55 3-8 KIT-5 1-93
E-SL6125-40 2-60 E-X2241-77 3-8 VIDEO-1 1-260,5-17
E-SL6125-45 2-60 E-X2241-78 3-8 VIDEO-1F 1-260,5-17
E-SL6125-7 2-60 E-X2241-88 3-8 VIDEO-1S 1-260,5-17
E-SL6125-2X 2-60 E-X2778-55 3-8 VIDEO-2F 1-260,5-17
E-SL6125X 2-60 E-X2778-77 3-8 VIDEO-2S 1-260,5-17
E-SL616 2-113 E-X2778-78 3-8 VIDEO-8 1-260,5-17
E-SL617 2-113 E-X2778-88 3-8
E-SL6300 2-109 E-X3920-55 3-8
E-SL6900 2-110 E-X3920-77 3-8
E-SL7200 2-46 E-X3920-78 3-8
E-SL7700 2-109 E-X3920-88 3-8
E-SL7800 2-73 E-X5126-78 3-8
E-SL780210 2-73 E-X5126-88 3-8
8-14
AIR BRAKE AND WHEEL
LIGHT/MEDIUM/HEAVY-DUTY TRUCK PARTS
AIR BRAKE AND WHEEL
FOR TRUCKS / TRACTORS / TRAILERS
Distributed By: