Professional Documents
Culture Documents
12V boost controller .xls (兼容模式)
12V boost controller .xls (兼容模式)
Product Pictures
6.4-
(-20 ℃
12V(Opt 9-18V 40W 95% 8A 30S 5S 25-35V 0-15m 5s Y 5%-93%
+40 ℃
ional)
3.product manual
Constantly bright on/LED off
standby state, when the PV Inductive on/LED off standby state, when the
board detects a period from voltage of the photovoltaic panel is detected,
high electrocal level to low the voltage is turned to low electrocal level after
electrocal level, the MCU will 5 seconds, and the program automatically
automatically adjust to the
automatic mode. switches to the automatic mode after one cycle
is activated.
PWM dimming,the constant light mode lights up 100%, automatically detects whether thephotovoltaic panel has a
high electrocal level, and detects that there is no high electrocal level 5 seconds delay to start the automatic mode
function. Automatic mode function: 2% power reduction every 10 minutes, the lowest power is reduced to 30%; after
detecting the photovoltaic panel has a high electrocal level to turn off the LED
Description: Remote mode, can start 3H.5H.8H. Timing power, automatically detect whether the photovoltaic panel
has a high level, when no high level output is detected, the automatic mode function is activated after a delay of 2
seconds. Automatic mode function: By default, the power is reduced by 2% every 10 minutes, and the minimum
power is reduced to 30% (the power is adjusted according to the time set by the upper computer software); after
that, the photovoltaic panel is detected to have a high level to turn off the LED.