Professional Documents
Culture Documents
ASSIGNMENT 5
QUESTION 1. Determine nodal displacement, element stresses and support reactions of the
following:-
Question 3: If the support B of truss shown in Fig. above yields by 0.1 mm, determine the member
forces due to applied load and yielding of the support.
Question 4: Figure shows an intermediate pin connected plane stress with cross section area of
diagonal member equal to 2000mm2 and all other members with cross section area of 1000mm2. If
E=200KN/mm2.
Question 6. Determine the forces in the members of the truss shown in figure Take E = 200GPa, A =
2000 mm2 .