Professional Documents
Culture Documents
TenCate Polyfelt® F
Hydraulical Properties
Number of Constrictions – [ASTM D 7178-06, XPG 38030 see overleaf] – 25–40 25–40 25–40
Opening size O90 [EN ISO 12956] µm 100 90 80
Permeability normal to the plane [EN ISO 11058] l/m2s (mm/s) 60 45 30
Flow rate in the plane 20/100 kPa 10-6 m2 /s 4.0 / 1.1 8 / 3 12 / 4.5
[EN ISO 12958]
Mechanical Properties
Elongation at max. load [EN ISO 10319] MD/CD % 85 / 70 90 / 75 85 / 80
Absorbed energy* [EN ISO 10319] kJ/m 11.6 13.2 14.4
Tensile strength [EN ISO 10319] MD/CD kN/m 30 / 30 32 / 32 35 / 35
Cone drop test [EN ISO 13433] mm 11 8.5 7
CBR puncture resistance [EN ISO 12236] N 4600 4800 6500
Durability Properties
Identification Properties
The values given are average values obtained in our laboratories and in testing institues. The right is reserved to make changes without notice at any time.
www.tencategeo.eu
TenCate Polyfelt® F – Constriction Concept, Forms of Supply
1. Filter homogeneity – m ≥ 25 10
m=10
Experimental (left figure): The nonwoven is 9
15
20
25
m=
m=
8
size [-]
160 homogeneous from a given thickness. This m=
size [–]
7
140 optimum thickness depends on its internal 30
Fibre/ Fibre
[microns]
FOS[microns]
120 6 m=
structure (density, fibre size).
FOS /FOS
100 5
FOS
80 40
4 m=
60
40 C0 = O0 Theoretical (right figure): The nonwoven is 3
0 1 2 3 4
Geotextilethickness
thickness[mm]
[mm]
5 6 homogeneous if its number of constrictions 2
Geotextile
m ≥ 25 (for all nonwovens). 1 m=80
O100 O100
100% 0 20 40 60 80 100 120 140 160 180 200
Thickness / Fibre
Thickness size
/ Fibre [-] [–]
size
0%
O0 = C0
2. Soil stability (no risk of internal clogging) – m ≤ 40
The Functions of a geotextile filtration system To stabilise the soil, the skeleton particles
are (see figure to the right): should be maintained near the interface
soil/geotextile. A stable filtration is
3
(1) Maintain the soil skeleton in place guaranteed when the maximum number 1
(2) Let fine instable particles pass of constrictions does not exceed a certain
(3) Allow a free long-term water flow value: m ≤ 40. 2
The information given in this brochure is to the best of our knowledge true and correct, however new research results and practical experience can make revisions necessary.
No guarantee or liability can be drawn from the information mentioned herein. Furthermore, it is not our intention to violate any patents or licences.
Czech Republic Tel. +420 2 2425 1843 service.cz@tencategeo.com Scandinavia | Baltics Tel. +31 546 544 811 geonordic@tencategeo.com
France | Africa Tel. +33 1 34 23 53 63 service.fr@tencategeo.com Spain | Portugal Tel. +34 607 499 962 service.es@tencategeo.com TenCate Geosynthetics Austria Gesm.b.H, TenCate
Germany Tel. +49 30 3435 02 10 service.de@tencategeo.com Switzerland Tel. +49 30 3435 02 10 service.ch@tencategeo.com Geosynthetics France S.A.S and TenCate Geosynthetics
Italy Tel. +39 0362 34 58 11 service.it@tencategeo.com Turkey Tel. +90 544 535 5047 service.tr@tencategeo.com Netherlands b.v. are certified for the design, manufacturing
Near Middle East Tel. +33 1 34 23 53 63 service.nme@tencategeo.com UK | Ireland Tel. +44 1952 588 066 service.uk@tencategeo.com and sales of geotextile and geotextile related products.
www.tencategeo.eu