Professional Documents
Culture Documents
5. Select TOPO.
6. Select Occupy.
15. Sight Backsight point or direction. this first backsight is pointing to proposed location of second location of the
instrument?
16. Input Angle or Coordinates.
25. Input Point name and code of traverse point. Ex. TP1
26. Sight and measure the traverse point. traverse point, meaning points in the coal pile something like that?
27. Turn off the instrument.
28. Transfer the instrument to your traverse point.
29. Turn On the instrument.
30. Level the instrument.
31. Press Ok or ESC.
32. In Observation mode go to page 3.
33. Select TOPO.
what point number do i load, the last point in cole pile or the point of the second location
of th instrument?
36. Select the traverse point to be occupy and press OK. TP1
what point number do i load, the last point in cole pile or the point of the second location
of th instrument?
42. Select the point that correspond to your backsight point and press OK.
44. You can now gather data or perform another traverse by following steps 23 to 43.