This document provides product details for a 20m3 polythene vertical water tank. The tank has a diameter of 2820mm, height of 3430mm, and surface area of 8m2. When empty it weighs 400kg and when full it weighs 20,400kg. It has a net capacity of around 20m3 and gross capacity of 21.4m3. It is made of polythene and designed to hold water. Installation and usage notes are provided.
Original Description:
Original Title
20m3 Polythene Vertical White Water Tank Details_product
This document provides product details for a 20m3 polythene vertical water tank. The tank has a diameter of 2820mm, height of 3430mm, and surface area of 8m2. When empty it weighs 400kg and when full it weighs 20,400kg. It has a net capacity of around 20m3 and gross capacity of 21.4m3. It is made of polythene and designed to hold water. Installation and usage notes are provided.
This document provides product details for a 20m3 polythene vertical water tank. The tank has a diameter of 2820mm, height of 3430mm, and surface area of 8m2. When empty it weighs 400kg and when full it weighs 20,400kg. It has a net capacity of around 20m3 and gross capacity of 21.4m3. It is made of polythene and designed to hold water. Installation and usage notes are provided.
PRODUCT DETAILS info@atilimsangrup.com Top Dished Shell Bottom Dished +90 216 394 35 11 CODE WARRANTY DATE PAGE REV. Diameter mm Ø2820 Ø2820 Ø2820 600-20 2 Yıl 01.10.2020 1/1 1 2N 2 Lifting Lugs 30 160*10*40 mm Height mm 3430 1N 1 Inlet 63 - Brazz / Outside Threaded Surface m² 8 M 1 Manhole 450 550 Spin Cover 20m3 Polythene Vertical White Water Tank Weight Kg EMPTY 400 FULL 20400 H.TEST 21800 POS. Q DESCRIPTION Ø H RATE NOTE
OTHER DETAILS NOZZLES ALTERNATIVE COLOR : BLUE - CODE : 600m-20
Capacity m³ NET ~ 20 BRÜT ~ 21,4 NOTES ATILIMSAN RESERVE THE OWNERSHIP UNDER THE LAW OF THIS DRAWING WITH PROHIBITION Contained Fluid - Su (1) Tanks must be installed on a flat concreted floor. OF EVEN PARTIAL REPRODUCTION AND TO MAKE IT KNOWN TO OTHER PERSONS WITHOUT (2) Don't make pressure to nozzles. Density kg/m³ 1 OUR WRITTEN AUTHORIZATION. (3) Support nozzles with a supporter after installatio especially at bottom of tank. Tempature Operation - / Design 50 (4) Don't interfere with cutter materials onto tank. Any disputes or claims arising out of or in connection with its subject matter shall be governed by and °C (5) Use flex pipes during installation. construed in accordance with the law of Turkey. Pressure Barg Operation - ATM / Design ATM (6) Don't use any fluid except of water.