Professional Documents
Culture Documents
MoHa
October 19, 2021
Abstract
Wheatstone RoC
1 Problem Statement
We take a wheatstone bridge as shown in Fig 2 we fix r1 r2 r4 as 1,2 and 4 ohms respectively now the
r3 is variable auto increases as steps of 0.1 ohm every second we use galvanometer as shown in Fig
1 here all the measurements will be in respect of the 0 line of the galvanometer we assume that the
initial resistance of r3 is 0.1 ohm
2 Problems
2.1 P1
Plot the angular displacement of the needle in a graph with respect to time
2.2 P2
Plot the displacement of the needle in the r cap with respect to time
2.3 P3
What would be the graphs if we used an ammeter or a voltmeter here in place of galvanometer.
References
1
Figure 2: Wheatstone Bridge