Professional Documents
Culture Documents
What is the load stress factor for cast iron gear pair if BHN = 300?
a. 1.89 N/mm2
b. 1.62 N/mm2
c. 1.44 N/mm2
d. 1.413 N/mm2
a. 120 B Th U/hr
b. 200 B Th U/hr
c. 1200 B Th U/hr
d. 12000 B Th U/hr
8) According to Joule's law, the internal energy of a perfect gas is the function of absolute ______
a. density
b. pressure
c. temperature
d. volume
9) The point at which the cutting tool reaches, beyond which it will not function satisfactorily until it is
reground, is called as
a. tool wear
b. tool failure
c. too diffusion
d. none of the above
a. depth of cut
b. cutting speed
c. feed
d. none of the above has any effect on cutting temperature
12 Which fixtures are used for machining parts which must have machined details evenly spaced?
a. Profile fixtures
b. Duplex fixtures
c. Indexing fixtures
a. placing device
b. fixing device
c. locating device
d. positioning device
a. increase with increase in the feed of the tool and decreases with increase in the depth of cut
b. decrease with increase in the feed of the tool and increases with increase in the depth of cut
c. increase with increase in both the feed of the tool and the depth of cut
d. decrease with increase in both the feed of the tool and the depth of cut
16) V-blocks (Vee locators) are used for clamping as well as locating when faces are inclined upto
a. 30o
b. 12o
c. 9o
d. 3o
17) Which drilling machine is used to perform drilling operation on the workpieces which are too heavy
and also maybe too large to mount on worktable?
a. Indexing mechanism
b. Four-bar chain mechanism
c. Quick return mechanism
d. None of the above
20) The thickness of layer material removed in one pass of workpiece under the cutter is called as
a. coefficient of friction
b. hardness
c. melting point
d. thermal conductivity
24) Which of the following cold working operations are suitable for α brass?
a. Cold rolling
b. Deep drawing
c. Both a. and b.
d. None of the above
a. Graphitize carbide
b. Decrease ductility
c. Both a. and b.
d. None of the above
27) Which desulphurising agent is used to remove sulphur from iron during melting?
a. Calcium carbide
b. Sodium carbonate
c. Soda ash
d. All of the above
28) Rosettes of tempered carbon in the matrix of ferrite are observed in the microstructure of _____
29) Which of the following elements increase/s chilled depth for chilled cast irons?
a. Silicon
b. Manganese
c. Manganese sulphide
d. All of the above