Dioneer Dra
Technical Data Sheet
Torch Membrane
Product Description
Pioneer Pro Torch Membrane are plasto-
meric waterproofing membranes manufac
tured in an advanced continuous calendaring
process by saturating and coating a synthetic
carrier with a water proofing compound
made of special grade of bitumen, which
‘modified with APP polymers. While the APP
polymers enhance the thermal, mechanical
and aging properties of the membranes
‘compound, the mechanical characteristic of
Torch Membrane are established by the
non-woven continuous filament spun-bond
Polyester or Glassfiber mat which acts as the
reinforcement that provides the membrane
with its resistance, puncture resistance and
elongation properties. The upper surface of
Torch Membrane is recovered with an anti-
adhesive finish material while the lower face
is laminated with a thermo-fusible polyeth-
ylene film
Key Features
Torch Membrane are multi-purpose mem-
branes for roofing and water proofing appli-
ations subjected to different mechanical
stresses and normal weathering conditions,
in multi-layer systems and can be used as a
single layer in a specific application. Torch
Membrane are particularly recommended for
the following applications.
* Roofing or re-roofing works for sloped and
flat protected roofs.
* Waterproofing of underground structures.
* Waterproofing of wet areas, mechanical
rooms and terraces.
Torch Membrane is used for exposed appli-
cations or as a cap-sheet in a multi-layer
system.
Uses
Torch Membrane are multi-purpose mem-
branes for roofing and water proofing appli-
cations subjected to different mechanical
stresses and normal weathering conditions,
in multi-layer systems and can be used as a
single layer in a specific application.
Torch Membrane are particularly recom-
mended for the following applications.
* Roofing or re-roofing works for sloped and
flat protected roofs,
* Waterproofing of underground structures.
* Waterproofing of wet areas, mechanical
rooms and terraces.
Torch Membrane is used for exposed appli-
cations or as a cap-sheet in a multi-layer
system,
Surface Finish
The lower surface of Torch Membrane is
laminated with a Polyethylene film while the
upper surface is covered with one of the
following surface finish materials:
‘Fine Sand (Torch Membrane 3mm sanded)
‘* Mineral Slate chips or Special granules
(Torch Membrane 4mm granulated)
Application
Torch Membrane is usually applied by using
a propane torch or a hot air generator as well
as by mechanical fastening. It can also be
applied using special adhesives in cold or
hot applications. The substrate surface must
be clean, dry, smooth and free from any
itregularities. According to the surface condi-
tions, a coat of PAI (Pioneer Adhesive, Inc)
primer maybe required prior to the applica
tion of the membrane, Torch Membrane can
be applied to the substrate shall be decided
according to the waterproofing system
design. Side laps should be from 8-10 cm,
while end laps should be from 12-15 om.
Surface Finish
The lower surface of Torch Membrane is
laminated with a Polyethylene film while the
upper surface is covered with one of the
following surface finish materials:
‘+ Fine Sand (Torch Membrane 3mm sanded)
‘* Mineral Slate chips or Special granules
(Torch Membrane 4mm granulated)
Storage and Handling
Torch Membrane rolls should be kept in
Upright position in a flat, property ventilated
and sheltered storage area.°
Standard Supply Data and Palletising
Group Group Thickness* Standard | Rolis/Pallet
400 105 | Roll Size Group 100 | Group 05
300305 smm. iMxiom_—— | 28 28
400 405 mm. Mx 10M 23 23
“Thickness tolerance as per UEAtc. Directives for Group 100 and UEAIc. +5% for Group 105
Group Group) Weight™ Standard | Group Group
4000 41005 Roll Size 1000 4005
4000 4005, 4.0K g/sqm 4Mx10M_| 30 30
‘4500 4505 4.5Kg/sqm 4Mx10M_|_ 25 25
5000 5005 5.0Kg/sqm IMx10M_| 23 25
"Weight tolerance as par UEAtc. Directives for Group 1000 and 25% for Group T005.
Loading Capacity: 20 pallets/ Container
‘The above quantities are indicative only and
may be subjected to changes in order to
comply with transport limitations according
to the final destination of the product.
PAI membranes are made of non-polluting
substances, therefore are safe products
during production, application and use. @
apa Tar Tat aed — ne
ius
a sre ha 7
Tar ne) ‘om erie) [no ;
Pe ee or Be i
reste” | barn gh te ——[ eves —[ a He
Sane Ota fe Bute ne
conga Snag —e is
feet | cognate =| ian —— [a :
Tes er oS tae —[ orient ta a
Taos argh tens Nemesia ——[tane a
Engen stat gcd or | Bact | selec 8
sient eta [etree [te peer
were | ory og nguara paisa) [| Bevzaa [so a
esate [he Sowa parse) tN Tiare i
hot no aus “Loynoans”™ | [asim aoa sa ‘or
‘se tn Peres fone AV AsmB sl bans| an i
Nast Susan No Buta ah [in t
Dron tay gue es | vasa aed tis
tame as eae Te a ‘e
Footy as eras Ter te
tunai_ {Dru Sy * —{ eee [ar ste
i Properties | Wate meeacay = Waterers at aowpa ENIBOE PASSED
twee
Vile ery -Wiigirse at | ts BEC | in @
i Ieee
(ie Ne asst —| 4
nro , Br te
8 ae Sexe OM !
‘tne :
Sara oi agar —| wash rss ——| a iar
Stotaamns dioan-ebens | haoen —[ Bia) [a =
Mostonnal Roneignane
Moca tenn Saye) [. wemece E :
‘Sato a : wares O
VEZ Adhesives, Inc.
505012080 HON cre
Te eee et teen
ere ise ec ser eres eenTechnical Data Sheet
oO
co a TR od Taree er
inane Pi
i Fee ee
| Prete | Faigu nesancs as ‘unison
} ae re
vor
1 | seer con [atlaors | :
Soon ¢ Se fe
5 ‘aneons conte oh Apa Nsoom | Progeuene | 2
Fosanrsto wala : Svs
Ttige ion ar
sor los ‘er Foe
oe” Ha " 2
fore " :
Sle Pah § Si Shi an
‘Sos : Sars
e
ota Fs :
“Tne declared average value represent the bast patormance achieved at the present tate of curknowlcge, PAI Plonaer Aches, ne
‘eserves the posable chango, wou warg, te leche charters order to maketh produc
mors responding tothe
pplication raquremes, The choice of to type of membrane for he kindof we Is al the archaea’ cretion
Waray and Discaimers
‘Unless an adetional waranty is specially ated on fe appcable pod
pkagig pode teat Fonte warrants ht ach nce pote
anions wth the aplcable.—Pneer—prodet
specicaton at the tne of shipment, and when propa used and
‘minted in accardance wth noe’ cen uses Tena! Oa
‘Shaet{ 705, soe the purpose for whichis interded. The recommen
hon ard statements in Powe’ TS ae badongo Warranty nd
Disaimere
Unit an ational waranty special statadon te appt prot
packaging produc Iie, Fonte waa at each Poe pod
cenlorns wih the apple Pioneer prot
specication at the tine af shipment, and when prope ubed and
‘mated in ccrdace with Ponoa' carer julie Tica Data
‘Shact( TD, wi sone he purpose fer whichis andes. The recommen
Chtons and staonents i Perea TDS are bad en geod bulking
racic but re by any meas, an exhaustive tere ofa lat
Irematon, Paneer” shal not be lable fore
‘ecammandaton int TS ard the promance of th leat Product.
Poe sal as not be Tale fo any caine, darages dete aing
‘rom or nny way title poor workman, caret design of
detailing, use ofthe loner product in unstle condos, and fee
neue.
Poreer MES ND OTHER WARRAVTES, | CONDITONS OR
AEFRESERTATIONS, PRESS OR MPUED, CLUONG, BUT NOT LNTED
10, KY LED WARRANTY OR —CONOTON OF
MEROUNTABLITY OR FITHESS FOR A PARTIOULAR PURPOSE OR ANY
INPLED WARRANTY OR CONDITION ARNG OUT OF A COURSE OF
‘EAL, CUSTOMER OR USAGE OF TRADE. Wh nme pate! derek
cenfom ths waranty te te sla exclvve reno at nea
opr, the replace of the Ponte product trend othe purchase
ic.
Peed
pe itright
ey