Professional Documents
Culture Documents
FEATURES:
»» VCO-Transceiver centered @ 24GHz
»» FMCW/FSK capable; therefore measurement of distance as well
as recognition of stationary objects possible (depending on
modulation)
»» narrow beam pattern
»» RF-pre-amplifier for lowest noise operation
»» split transmit and receive path for maximum gain
»» stereo (dual channel) operation for direction of motion detection
»» IF-pre-amplifier, bandwidth limited for lowest noise performance
Version 4.5
DESCRIPTION CERTIFICATES
The IVS-179 is the narrow beam version of the IVS- InnoSenT GmbH has established and applies a
148. The same interface as the IVS-148 makes the quality system for: development, production and
IVS-179 a perfect option where the IVS-148 pattern
DATA SHEET IVS-179
sales of radar sensors for industrial and automotive
is no longer sufficient. sensors. More information on our quality standards:
https://www.innosent.de/en/company/certifications/
product.
Page 1
ESD-INFO
This InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to
CMOS devices are sufficient when handling the device. Touching the signal output pins has to be
avoided at any time before soldering or plugging the device into a motherboard.
ELECTRICAL CHARACTERISTICS
Receiver
phase 60 90 120 °
Version 4.5
gain 33 dB
elevation vertical 28 °
elevation vertical 15 dB
Power supply
Environment
Mechanical Outlines
height 11.0
outline dimensions compare drawing length 105.0 mm
width 85.0
Page 2
Antenna Orientation:
vertical
antenna
horizontal
-5
-10
Normalized Gain [dB]
-15
-20
-25
-30
-35
-40
Version 4.5
-180,0 -150,0 -120,0 -90,0 -60,0 -30,0 0,0 30,0 60,0 90,0 120,0 150,0 180,0
Angle [°]
vertical 28 °
vertical 15 dB
Page 3
INTERFACE
MECHANICAL OUTLINES
side view
8
2
85
77
66
Version 4.5
,1
2
ø2
ø3.
43
e
105
103
97
ksid
bac
length of cable
°
roughly 70mm
27.66
34.21
20.92
Page 4
APPROVAL
This Data Sheet contains the technical specifications of the described product. All previous versions of this Data
Sheet are no longer valid.
The sensor uses Hydrocarbon based material which may change its dielectric properties when used in an oxida-
tive environment. This may vary based on temperature. Therefore InnoSenT recommends evaluating this influ-
ence within the specific environment.
antenna
Version 4.5
DATA SHEET IVS-179
InnoSenT GmbH
Am Rödertor 30 Tel.: +49 (0) 9528 - 9518 - 0