You are on page 1of 43

Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Nokia Flexi WCDMA BTS


Iub IP Mode Integration

1 © Nokia Siemens Networks RA45314EN08GLA0

RA45318EN05GLA0 1
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Flexi WCDMA BTS Integration

Legal notice
Intellectual Property Rights

All copyrights and intellectual property rights for NSN training documentation, product
documentation and slide presentation material, all of which are forthwith known as NSN
training material, are the exclusive property of NSN. NSN owns the rights to copying,
modification, translation, adaptation or derivatives including any improvements or
developments. NSN has the sole right to copy, distribute, amend, modify, develop, license,
sublicense, sell, transfer and assign the NSN training material. Individuals can use the
NSN training material for their own personal self-development only, those same individuals
cannot subsequently pass on that same Intellectual Property to others without the prior
written agreement of NSN. The NSN training material cannot be used outside of an agreed
NSN training session for development of groups without the prior written agreement of
NSN.

2 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 2
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP based Iub Connectivity: MUC testbed

RNC RN4.0

NPGE ICSU
Signaling
IPoATM IPoATM
Subnet
NB IP Subnet IFGE0 10.31.252.64/26
ETH CP/UP Signalling unit
10.31.255.225 10.31.143.254
Iub IP 10.31.252.73

Flexi BTS
One IP for CP & UP
IP 10.31.255.226

Interface unit
IFGE0: 10.31.145.40
IFGE1: 10.31.145.41

3 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 3
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP based Iu / Iub Connectivity

Core (Iu)
• Internal IPoATM are created
automatically (ZQMQ;)
RNC • Fully meshed IPoATM subnet
creation is used to create IPs
IP
ICSU-0 for IP based Iub to ICSU and
IP
IP oA
TM
NPGE
ICSU-1
IP
NPGE • ICSU gets an additional IP for
ICSU-2
IP IP Subnet Iu using same IPoATM as for
ICSU-3
IP
Iub
IP
• The internal IPoATM is
Interface unit reused for Iu
ICSU-N IP • Static Routes in ICSU and
Signalling unit NPGE to define which NPGE
and IF will be used for Core
NodeB
• Iu
• Iub

4 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 4
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP Addresses and BTS Id in BTS

Definition of the BTS Subnet, BTS and TRS IP addresses.

RNC Operation and Maintenance Unit (OMU) IP address

5 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 5
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP Addresses and BTS Id in RNC

BTS Id

TRS IP address

Reference to IPNB object

6 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 6
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP: Transport Address and Quality of Service

Transport Ethernet Interface IP address

7 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 7
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

BTS Transport IP Address in RNC: IPNB Object

Transport Ethernet IP address as


configured in BTS is set in IPNB object
as C-plane Destination Address for Iub.

8 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 8
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Iub IP Mode Settings: Signaling Subnet in RNC

IP signaling subnet within RNC and IP address of the


ICSU.
ICSU IP address is received from RNC. It is not
configurable on BTS side. Only signaling subnetwork in
RNC must be set ion BTS side.

9 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 9
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Iub IP Mode Settings: SCTP Port Settings in BTS

Minimum SCTP Port is defined in IPNB object in RNC.


C-NBAP will run on port 49152 and D-NBAP on 49153.

10 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 10
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

SCTP Port Settings in RNC: IPNB Object

11 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 11
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Missmatch between SCTP Port Settings in RNC


and BTS

As Minimum SCTP port in BTS configuration


(51000) does not fit the setting in IPNB object
(50000) the BTS is in “BTS configured” state and
not in “BTS integrated to RAN” or “On Air”.
It is possible to modify this value in IPNB object
without reset of the BTS.
If the change should be done on BTS side the re-
commissioning is needed!

12 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 12
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Iub IP Mode Settings: Bit Rates

Connection Admission Control (CAC) Commited Bit Rate,


Signalling Bit Rate and DCN Bit Rate are configured in
BTS and in RNC.
Bit rates in RNC can be checked with ZQRL; command
from Man Machine Interface.

13 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 13
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Interrogating NPGE card in RNC

IP Interface IFAI71 on NPGE-3 has


an IP address 10.31.252.126 which
is routed internally to the
corresponding ICSU with IP Address
10.31.252.73 (in this example ICSU-8).

Physical Interfaces on NPGE IFGE0 and


IFGE1 and Loopback interface LO0.

14 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 14
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Interrogating ICSU cards in RNC

ICSU-8 own IP address


and routing to IFAI71 on
NPGE

15 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 15
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Interrogating static routes in RNC (ZQKB;)

10.31.252.126 -> IP address of NPGE-3 -> IFAI71


10.31.145.254 -> IP address of the router near to RNC
16 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 16
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Interrogating Local Subnet in RNC (ZQML;)

Signaling Subnet is also


configured in BTS.

17 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 17
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Change of Administrative State on NPGE Interface

18 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 18
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Interrogating OMU card in RNC

19 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 19
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

BTS Routing

20 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 20
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Timing over Packet (ToP) settings

21 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 21
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Cell Locked in RNC

22 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 22
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Cell Locked in RNC (cont)

BTS Id in RNC

Global Cell Id in RNC

Cell is locked in RNC

23 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 23
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Unlock Cell in RNC

BTS state is “On Air” at least one cell is in “Operational” state.

24 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 24
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Unlock Cell in RNC (cont)

Cell is unlocked in RNC

25 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 25
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Cell Blocked in BTS

Cell Blocked in BTS can not be Unblocked in RNC!

26 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 26
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Cell Blocked in BTS (cont)

Cell Blocked in BTS can not be Unblocked in RNC!

27 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 27
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Unblock Cell in BTS

28 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 28
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

RX Signal Level Monitoring

Rx
2
Rx
1

RX Signal Level Monitoring feature requires a valid is license which must be activated in BTS.
Rx signal level is measured every minute.

Alarm is raised if
one of thresholds
is exceeded

29 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 29
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

RX Signal Level Monitoring (cont)

30 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 30
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

VSWR Threshold Tuning

Start tuning: system calculates thresholds.


Change threshold manually and Test Values becomes active.
After the test is finished it is possible to stop tuning with or without saving.

31 © Nokia Siemens Networks RA45318EN05GLA0

VSWR threshold tuning requires a valid license installed in Flexi WCDMA BTS
(Antenna Line Supervision License Key).

RA45318EN05GLA0 31
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

VSWR Alarm

VSWR supervision requires a valid license activated in BTS.


Alarm was raised because of open antenna connector on ANT1.

32 © Nokia Siemens Networks RA45318EN05GLA0

VSWR threshold tuning requires a valid license installed in Flexi WCDMA BTS
(Antenna Line Supervision License Key).

RA45318EN05GLA0 32
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

IP Connectivity Test

33 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 33
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

TRS Web Interface


To access Web Interface in TRS either Public IP address
of the TRS module or TRS internal IP address can be
used. To access it via internal IP address set
http://192.168.255.129 in address line.
Laptop/PC must be in the same subnet as TRS.

34 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 34
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

TRS Web Interface: Ping any Host

35 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 35
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from TRS to NPGE IFGE0 in RNC

IP address of NPGE0 -> IFGE0 in RNC

36 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 36
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from NPGE IFGE0 to TRS

IP address of TRS

37 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 37
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from TRS to RNC OMU

IP address of RNC OMU

38 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 38
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from RNC OMU to TRS

IP address of TRS

39 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 39
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from RNC (NPGE IFGE0) to Transport


Ethernet Interface on TRS

IP address of the Transport Ethernet


Interface on TRS

40 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 40
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from TRS to ICSU-8 in RNC

Signaling network in RNC NOT configured. Signaling network in RNC configured.

41 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 41
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

Ping from ICSU-8 in RNC to TRS and Transport


Ethernet Interface
IP address of the Transport Ethernet
Interface on TRS

IP address of TRS

42 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 42
Flexi_WCDMA_BTS_RU10 Integration Iub IP Mode

GPS Synchronisation Option

43 © Nokia Siemens Networks RA45318EN05GLA0

RA45318EN05GLA0 43

You might also like