Professional Documents
Culture Documents
Description
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and
CENELEC EN 50173 (2011) for Category 6/Class E applications.
The products have been tested up to 250MHz and are designed for high speed protocols such as
Gigabit Ethernet (1000Mbps) applications.
The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at
both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the
latch on the RJ45 plugs from getting damaged during installation.
Applications
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4
Technical data
Number of pairs 4
Colors of twisted pairs Blue-white/blue, Orange-white/orange,
Green-white/green, Brown-white/brown
Material Conductor material - Stranded copper conductor
Conductor insulation - HDPE
Contact - Phosphor Bronze contact area is plated with 50micro-
inches of Gold Over 100 micro-inches of Nickel
Molded boot - Fire retardant PVC/LSZH compounds
Cable jacket - PVC/LSZH
Cable Diameter - <6.0mm
Conductor diameter 24 AWG, 7 stranded copper wire conductors
Plugs RJ45 8P8C
Fire rating CMG
Total contact force 800 grams
Retention 50N
Insertion/extraction 750 cycles minimum
Insulation resistance 500MΩmin. @ 100V d.c
Dielectric withstanding voltage 1000V d.c
Contact resistance 20mΩ Max.
Environmental data
Technical drawing
Ordering information
Description Part code
Patch cord UTP, category 6, standard plug, PVC SCS-PC-C6-UTP-yyM-PVC-xx
Patch cord UTP, category 6, standard plug, LSZH SCS-PC-C6-UTP-yyM-LSZH-xx
yy – length:0.5m,1m,1.5m,2m,3m,5m,10m
xx – color: Black (BK), Blue (BL), Green (GN), Gray (GY), Orange (OR), Red (RD), White (WH), Yellow (YL)