Professional Documents
Culture Documents
Instruction Manual
Clamp 12 6. Keep the car engine on while using the machine connected to the cigar jack.
Key Fixation 17
Standard Menu 19
Convenient Function 23
Setting Menu 25
Clamp Calibration 26
Placing Stopper 27
Key Decoding With Original Key 28
Key Bitting Number Adjustment 30
Key Cutting With Key Bitting Number 31
Key Cutting With Code 33
Frequently Used Key Registration 34
Create Key Profile 35
Wifi Connection 37
Online Upgrade 38
USB Upgrade 39
Warranty 41
-01 -02
Cautions Cautions
1.make sure to observe the followings for using the equipment safely;
2.Below information is provided to enhance the user security awareness and
prevent property loss. Read the cautions carefully for correct use. Cautions for Use
Do not put any tools, water
lt indicates that you may get injured or machine get damaged if you
containers, mugs, cups or small
NOTICE
fail to follow the instructions. metal pieces on the unit or cutting
The cutter of the machine spins
bed.
lt indicates that you can be seriously injured if you fail to follow the at high speed during operation.
Be careful not to put any part of
instructions. Vibration of the machine and
WARNING worker’s body or clothing or other
carelessness of the user may
things inside of the machine.
cause falling of the above objects,
The operator may get seriously
Cautions for Power
WARNING
WARNING which leads to injuries on the user.
injured by the cutter if this is
ignored.
Never use damaged power cords Never plug in many power cords in Overheating or electric leakage
or loose plugs or sockets. an outlet simultaneously. The outlet may lead to fire or malfunction.lt
WARNING NOTICE may get too hot and cause fire. may also cause electric shock or
fire when the unit gets wet.
Never pull out the plug by tugging
Keep the machine unplugged
the power-cord, or touch the
when unused for a long time.
WARNING metal part of the power plug. NOTICE
Make sure to install the machine on a stable flat surface. The machine
weighs about 19.5kg and generates vibration during operation. lf you use the
machine on a bumpy surface, it may lead to damages on machine/worktable
WARNING
and injuries on users.
-03 -04
Part Part Name
Contents Figure Quantity Purpose
Stopper
1EA Key reference position guide
(Right-to-Left)
Auxiliary Clamp
Clamp Tightening Handle
HU66 Clamp 1EA ( Supporting to cut HU66 like Clamp
Volkswagen, Audi)
Crumb Tray
Power supply
24V Adaptor 1EA INPUT 100~240V 50/60 Hz 2A
OUTPUT 24V 5A
Tip:
1.Cutter and spindle belt are consumable items. Make sure to replace it after a
certain period of use.
2.The actual standard package will be changed based on product improvement.
-05 -06
Part Name Powers
You should always connect DB9 cable when operating SEC-E9.
DB9 cable
Power on
Power Switch
Clockwise twist
Strike, heavy and sharp things will damage the screen.
Decoder is a consumable material, easy to damage.
Avoid to strike or throw decoder casually.
For decoder damage caused in any cases, Kukai is not responsible
for it.
Power off
Press
-07 -08
Specifications Replacement of Consumable Items
Cutter
Input
Size 255(W)×360(H)×340(D)mm
Weight 19.5kg
Decoder
-09 -10
Replacement of Consumable Items Clamp
HU66 Clamp
Spindle Belt For Volkswagen, Audi, Skoda, Bentley,
Porsche, Lamborghini series, etc.(as below
picture shown ③ )
HU66 Clamp is included in the standard
package.
1. Insert the key according to the image 2. Tighten the screws to fix the key.
1. Loosen the screws of shown.
cutter cover and remove
the cutter cover.
-11 -12
Clamp Clamp
FO21 clamp is an optional clamp that is not FO19 clamp is an optional clamp that is not included
included in the standard package. in standard package.
Front View
1. Insert the key according to the image 2. Tighten the screws to fix the key.
Jaguar end screw Ford end screw shown.
-13 -14
Clamp Clamp
1.Insert the key according to the image 2. Tighten the screws to fix the key.
shown. A B
1. Insert the key according to below image 2. Tighten the screws to fix the key.
shown.
Place TOY2 clamp on the car key clamp. Place HU162T clamp on the car key clamp.
We have other optional clamps, please feel free to contact factory if you are
interested.
-15 -16
Key Fixation Key Fixation
Standard Key
top bottom
Tip Align
Laser Key
top bottom
Attention:
1.Standard key is always fixed at the top level of the car key clamp.
2.Laser key is always fixed at the bottom level of the car key clamp.
-17 -18
Standard Menu Standard Menu
Dimple Key Cutting Tubular Key Cutting Decoding to get key Convert key code by
bitting number key bitting number
-19 -20
Standard Menu Standard Menu
Left and Right: Automatically measure the width of key blank before
decoding and cutting.
Cutter diameter
2mm
You can manually set the cutting depth when cutting laser
High Speed:For soft material key blank. 1.2mm keys.
-21 -22
Convenient Function Convenient Function
-23 -24
Setting Menu Clamp Calibration
1.In SEC-E9, you should set up both original decoders when first / next step.
2."waiting" means working.
Clamp Calibration
First:
Calibrating the distance
between decoder and cutter.
Next:
Calibrating automobile key
Clamp Calibration Decoder Length clamp.
Calibration
-25 -26
Placing Stopper Key Decoding With Original Key
Stopper reference point can be changed by the key blank as shown in the e.g.)Audi-Q7
picture.
3 Tip Align
(Refer to Page 17)
3 Select "Q7" in the vehicle list.
4
Select the manufactured year.
4
5
-27 -28
Key Decoding With Original Key Key Bitting Number Adjustment
e.g.Audi A4
(Adjust each key bitting number according to the actual key depth)
909
When decoding is done, the key bitting number appears on the screen.
Move to the key bitting number
position that you want to add or
delete using button and
2 enter the decimal point desired to
7 Fix key blank on clamp and then press to start cutting. adjust.
-29 -30
Key Cutting With Key Bitting Number Key Cutting With Key Bitting Number
-31 -32
Key Cutting With Code Frequently Used Key Registration
Honda Accord e.g.)Audi-Q7
-33 -34
Create Key Profile Create Key Profile
Step 1: Click "Create Key" button. Step 2: Choose what type of key you would Step 7:Input key name and Press Step 8: Select the created key in key list.
like to add. "FAVORITE" to create a new key profile.
Step 3: Choose the key guided way. Step 4: Edit space location and space width.
Note:It requires user to have a good knowledge of lock structure and key
measurement, since this function is very expertise.
-35 -36
Wifi Connection Oneline Upgrade
Charging Instructions:
● The DB9 port is for charging and USB communication;
Step 1:
Click . Precautions:
1. Don't charge the screen under high temperature environment;
2. Please charge the screen promptly when screen is low battery.
Online upgrade:
1. Before upgrading please connect WIFI;
2. Press "Setup" button on the main interface, then press "Upgrade" button in
the next interface.
Step 2:
Choose the usable wifi in the
list.
Step 3:
Input password and click connect .
-37 -38
USB Upgrade USB Upgrade
1
Step 2: Click here;
Step 5:Download the upgrade file to the root Step 6: Insert the USB disk to the backside of Step 11: Press "INSTALL"; Step 12: Press "DONE" to finish upgrade process.
directory of USB disk; SEC-E9, wait for 15 seconds;
Step 7: Open "ES File Explorer" in the desktop Step 8: Select "Use by default for this USB device"
of tablet; and Press "OK";
-39 -40
Warranty
Product: CNC key cutting machine Model: SEC-E9
The warranty is 12 months, from the purchased date.
Below is the details:
1. Warranty product: SEC-E9
4. Free service
Except above cases, malfunctions caused by other reasons are eligible to free
service within warranty.
5. With regard to other items not stated here, our company will abide by
[rules of compensations against damages for customers]
Model: Name:
Purchase date: Company:
Name: Tel:
Company: Address:
Tel:
Address:
Invalid if tear up
-41