Professional Documents
Culture Documents
STANDARD 674344
First edition
1994-04-I 5
Reference number
IS0 6743-l 4:1994(E)
IS0 6743=14:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
- Part 0: General
0 IS0 1994
All rights reserved. Unless otherwise specified, nc part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
0 IS0 IS0 6743=14:1994(E)
...
III
iTeh STANDARD PREVIEW
This page intentionally left blank
(standards.iteh.ai)
ISO 6743-14:1994
https://standards.iteh.ai/catalog/standards/sist/9bfa9a6a-a2ba-48f6-b97a-
ec7050964679/iso-6743-14-1994
INTERNATIONAL STANDARD 0 IS0 IS0 6743=14:1994(E)
Part 14:
Family U (Heat treatment)
1
IS0 6743=14:1994(E) 0 IS0
The designation of products of the mineral oil type form, i.e. ISO-L-UHG, or in an abbreviated form, i.e.
(UH) may be supplemented by the addition of the L-UHG.
viscosity grade in accordance with IS0 3448.
(standards.iteh.ai)
Surface hardening
Aqueous fluid for slow harden-
ing
UAB
ICS 75.100.00
Descriptors: petroleum products, oils, hardening fluids, classification, heat treatment.