Professional Documents
Culture Documents
Product Overview
Product specifications
Features
1.0Kg
1.0Kg
1.0Kg
1.4Kg
1 2
ON
RC
RM
(Ring Master) Amber On Ring Member has been detected in the switch.
-- Off Disable
Green On Rapid Chain has been detected in the switch. (Active path)
-- Off Disable
LED LED
Mode RM RC Rapid Ring Status 1st Port 2nd Port
RM (Ring Master) RC (Rapid Chain)
HW
OFF OFF Single Ring Member The largest Odd Port Number The largest Even Port Number Lit Amber Off
Control
HW
ON OFF Single Ring Master The largest Odd Port Number The largest Even Port Number Lit Green Off
Control
SW
ON ON Rapid Ring Settings by Software -- -- -- --
Control
8TC: 8 ports, Tri speed (Non-PoE) i.e 10/100/1000 Base, Combo port
LS: Layer 2+, Commercial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 220(W) x 123(D)mm
Weight
1 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
8.2 Watts maximum
8TC: 8 ports, Tri speed (Non-PoE) i.e 10/100/1000 Base, Combo port
M: Metro features
IT: Layer 2+, Industrial 1 GbE switch
DC: DC supply
DIN: Dual input
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
135(H) x 62(W) x 130(D)mm
Weight
1 Kg
Temperature
Operating range: -40°C to +75°C
Humidity
Operating range: 10% to 90% (non-condensing)
Power input
12V/24V/48V DC
Power Rating
6.24 Watts maximum
8PC: 8 ports, Tri-speed(Low wattage PoE) i.e 10/100/1000 Base, combo port
LS: Layer 2+, Commercial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 220(W) x 242(D)mm
Weight
2.1 Kg
Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power rating
No PoE: 6.8 W
With PoE (30 W/port): 153.5 W
8HPC: 8 ports, Tri-speed(High wattage PoE) i.e 10/100/1000 Base, combo port
LS: Layer 2+, Industrial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 220(W) x 242(D)mm
Weight
2.1 Kg
Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power rating
No PoE: 8.1 W
With PoE (30 W/port): 245.4 W
8HPC: 8 ports, Tri-speed(High wattage PoE) i.e 10/100/1000 Base, combo port
LS-IT: Layer 2+, Industrial 1 GbE switch
DC: DC supply
DIN: Dual input
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
135(H) x 62(W) x 130(D)mm
Weight
1 Kg
Temperature
Operating range: -40°C to +75
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
48V~57V DC
Power rating
Non PoE: 6.24 W
Full load PoE (30 W/port): 220.8 W
8HPC: 8 ports, Tri-speed(High wattage PoE) i.e 10/100/1000 Base, combo port
M: Metro features
IT: Industrial type
DC: DC supply
DIN: Dual input
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
135(H) x 62(W) x 130(D)mm
Weight
1 Kg
Temperature
Operating range: -40°C to +75
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
48V~57V DC
Power rating
Non PoE: 6.24 W
Full load PoE (30 W/port): 220.8 W
8HP4S: 8 ports, Tri-speed(High wattage PoE) i.e 10/100/1000 Base, SFP port for GbE (Optical)
M: Metro features
IT: Industrial type
DC: DC supply
DIN: Dual input
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
135(H) x 62(W) x 130(D)mm
Weight
1.4 Kg
Temperature
Operating range: -40°C to +75
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
48V~57V DC
Power rating
Non PoE: 6.24 W
Full load PoE (30 W/port): 220.8 W
24TC: 24 ports, Tri speed (Non-PoE) i.e 10/100/1000 Base, Combo port
LS: Layer 2+, Commercial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
2.6 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 10.3 W
Full load: 22.1 W
24PC: 24 ports, Tri speed (High wattage PoE) i.e 10/100/1000 Base, Combo port
LS: Layer 2+, Commercial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.5 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 23.6 W
Full load: 411.8 W
24LPC: 24 ports, Tri speed (Low wattage PoE) i.e 10/100/1000 Base, Combo port
LS: Layer 2+, Commercial 1 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.3 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 14.3 W
Full load: 206.9 W
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.1 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ (Primary)
24-72V DC (Secondary)
Power Budget
No load: 10.3 W
Full load: 21.3 W
24TD: 24 ports, Tri speed (Non-PoE) i.e 10/100/1000 Base, Dual SFP (1000 Base-X SFP/ 10G SFP+)
LS: Layer 2+, Commercial 10 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.59 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 31.7 W
Full load: 45.5 W
24PD: 24 ports, Tri speed (High wattage PoE) i.e 10/100/1000 Base, Dual SFP (1000 Base-X SFP/ 10G SFP+)
LS: Layer 2+, Commercial 10 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.7 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 20.7 W
Full load: 424.7 W
24LPD: 24 ports, Tri speed (Low wattage PoE) i.e 10/100/1000 Base, Dual SFP (1000 Base-X SFP/ 10G SFP+)
LS: Layer 2+, Commercial 10 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.7 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ
Power Budget
No load: 24.6 W
Full load: 221.8 W
24SD: 24 ports, SFP port for GbE (optical, Non-POE), Dual SFP (1000 Base-X SFP/ 10G SFP+)
LS: Layer 2+, Commercial 10 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.1 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ (Primary)
24-72V DC (Secondary)
Power Budget
No load: 17.1 W
Full load: 38.46 W
24SD: 24 ports, SFP port for GbE (optical, Non-POE), Dual SFP (1000 Base-X SFP/ 10G SFP+)
M: Metro features, 10 GbE switch
System LED : Indicates if the switch is powered up correctly or not.
Mode LEDs: Indicates the mode of all ports on the switch.
Users can press the Mode button sequentially to switch among
the two different modes (Link/Activity/Speed mode and PoE
mode).
Port Status LEDs : Indicates the current status of each port.
Physical Specification
44(H) x 442(W) x 211(D)mm
Weight
3.1 Kg
Operating Temperature
Operating range: 0°C to 50°C
Humidity
Operating range: 5% to 95% (non-condensing)
Power input
90~240V AC, 50~60HZ (Primary)
24-72V DC (Secondary)
Power Budget
No load: 17.1 W
Full load: 38.46 W
Layer 2: Layer 3:
STP IPv4 static routing
Bridging IPv6 static routing
Trunking
VLAN support
Link aggregation
Unidirectional link detection (UDLD)
DHCP relay
Multicast VLAN registration (MVR)
IGMP v1/v2/v3 snooping
IGMP querier
IGMP proxy
MLD v1/v2 snooping
Hardware queue
Scheduling
Classification
Bandwidth control
Username: admin
Password:
Port configuration
PoE scheduling
Auto checking
Power delay
Persistent power
Layer 3 features
ARP inspection
DHCP Server
Zero Touch Upgrade
UPnP
CLI
NTP
Linear Protection
Ring Protection
Ethernet OAM
Service OAM
Perf. Monitoring
1. Holding the mode/reset button for 2-7 secs will result in_______
a) Reset of switch b) Change of LED mode c) Restore to default d) None of the above
5. What is the maximum power available (with PoE) for the switch 1400P-M1-8PC-LS?
a) 6.2 W b) 130 W c) 153.5 W d) 8.1 W
1) A
2) C
3) D
4) B
5) C
6) B
7) A
8) A
9) B
10) C
11) D
12) C