FAV
PHOTOELECTRIC SMOKE DETECTOR
FDK@SERIES
FEATURES WITH SURFACE MOUNTING BASE
(1) Small monitoring current of 454A
(2) 2.wite system
(3) Alarm response lamp (LED) =
(4) Simple mounting
(5) Very easy maintenance
(6) Very tow profile
Fp s
veto 1
combustion products (smoke) generated by a fre, and be
transmit an alarm signal to the fre alarm control panel
‘The photoelectric smoke detector can detect a fire in an
earlier stage than a heat detector. Generally, this
detector is installed in the spaces such as basements
ordinary floors, coridors,siaitcases, elevator shafts.
OPERATING PRINCIPLE AND FUNCTION
‘The photoelectric smoke detector is composed of a light WITH RECESS MOUNTING BASE
source, light sensing element, light shielding element
and detecting chamber. The light source (a
lighteemitting diode) emits light at intervals of about 3.5,
seconds, which does not reach the light sensing
element (photo diode) under normal conkitions because
ofthe light shielding mola. If smoke enters the detecting
chamber, the light from the light source is scattered by
smoke particles and reaches the light sensing element.
The light reaching the light sensing element varies with
smoke density and if it exceeds the predetermined level
the detector operates and automatically holds its .
operation.
The detector then transmits the alarm signal to the fre
‘alarm panel and the response lamp of the detector tums
pn)
SPECIFICATIONS
Medel ne. FOKaN6 7 FOKZIGN I FOREX
SENET Cedar wee
TYPE oT I TWitrenote heaton Gt
RESPONSE LAMP TED el
RATED VOLTAGE AND CURRENT Bav0e, 100m
[ALLOWABLE RANGE OF VOLTAGE 15¥ 10 30¥0C
‘QUESCENT CURRENT Nop A5HA
LO WDLE NOE OF ANGENTTHPERATIAE = 1016s
Wan boa ABS res
MATERIAL Base:Polycarbonate resin,
WEIGHT Top 108 I oprox Vad
“Tho detectors ae also available mn diferent models, le, FOK346 (Class 3 senso), FOKT 46 (Clas 1 sensi
NOHMI BOSAI LTD.
@HEAD OFFICE:7-3, Kudan-Minami 4-chome, Chiyoda-ku, Tokyo 102-8277, Japan @PHONE: (81)3-3265-0291 @FAX: (81) 3-3265-5948TYPICAL WIRING DIAGRAM
FIRE ALARM CONTROL PANEL
<>» REMOTE INDICATION LAMP (OPTION)
oo ++
c
r =
e END-OF-LINE
R | resistor
(1oKn42W)
TERMINALS) t
TERMS i,
‘*Max,pernissbe ruber of detectors to be connected: 30 smoke
TYPICAL MOUNTING (SURFACE MOUNTING TYPE)
ore per Tne
‘Wire Cornecton : Remove te insulation ofthe wire (#0:5~2.0nen) by TOrrm som is end, inset the bare wire inf te trina (or bases FZ2B060-2 ana
F28060-4)and tighten the screw or bases FZ8013.2/FZ8013N-2 ard FZB013-)
TYPICAL MOUNTING (RECESS MOUNTING TYPE)
pox coven i
DeTEoron MEAD
aefeonse Lave,
ee
carcass) Sa | |
$1s(ceuNe HOLE!
ENOTE : Cleaning ofthe detector head can be easly done ater
Tomoving the labyrinth cover. (COVERAGE AREA BY PHOTOELECTAIG SMOKE DETECTOR.
Tight between fo
lindmwningsuloce tna
ess than rm Ten
ana i5m ca
ORDERING INFORMATION
Model re. DESCRIPTION Model ne. DESCRIPTION
. ‘ FZB013.2/FZB013N-2_| Detector base: Surface mounting type Sorew ype terminal
FORSG/FDK24GN | Oetociey head Ordinary pe FZ5060-2 Detector base: Recess mounting bypelinserton toe terriral
Detector ead Ordnary be F2B013-6 Detesor base: Surface monriing te Screw type terminal
FORe4e% with remote inecation chou FZ5060-4 Detector base: Recess mountong hype (insertion toe terial
f° These insnuctons do not purport to cover all the deals or variations Inthe equlpment described nor provide or evely possible contingency tobe met in
conection Wit instalation, eration and maintonance.
seSpocitcatone ar subict fo change witout notice. Conisct Nok Beer relying on above specifeations
stun perromance is based en proper application ofthe product by a quale grovessicna
'2'Shouldfarthr information be deited or should particular problems are, wich are nat covered eufclenty far the purchace's purposes, the matter should
"be refered to Nati of dsrbiter your regen,
CTF-AIVI
HEAD OFFICE : 7-3, Kudan Minami 4-chome,
Chiyoda-ku, Tokyo 102-8277, Japan
@PHONE : (81)3-3265-0231
@F AX : (81)3-3265-5348
URL! http://www.nohmi.co.jp/english/
1310310-F-2718702