Professional Documents
Culture Documents
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45° +45°, –45°
2–16, continuously adjustable, each band 2–12, continuously adjustable, each band
Electrical downtilt (°)
separately separately
At mid tilt 13.8 14.1 14.2 14.3 17.0 17.5 17.8 18.4
Gain (dBi)
Over all tilts 13.7±0.6 14.0±0.5 14.1±0.5 14.2±0.6 16.9±0.7 17.4±0.7 17.7±0.6 18.3±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±7 69±6 68±6 63±6 69±7 65±6 63±6 58±6
Vertical 3 dB beam width (°) 15.2±1.3 13.9±0.9 13.2±0.9 12.4±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 27 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio, ±30° (dB) > 21 > 22 > 22 > 22 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18 > 17 > 17 > 17 > 18
Efficiency (dB) –1.34 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 74 84 83 80 79
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC grounding DC grounding
Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, -45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 15.7 17.2 17.5 17.9 18.5
Gain (dBi)
Over all tilts 15.7±0.9 17.1±0.8 17.4±0.6 17.8±0.6 18.4±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±8 69±6 66±6 62±6 58±6
Vertical 3 dB beam width (°) 9.0±0.8 7.2±0.8 6.5±0.8 5.7±0.7 5.2±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 27
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 26 > 26
Cross polar ratio, 0° (dB) > 17 > 17 > 18 > 18 > 17
Efficiency (dB) –0.70±0.15 –0.75±0.15 –0.80±0.15 –0.95±0.20 –1.00±0.20
Efficiency average (%) 85 84 83 80 79
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet is available in XML format.
1
Model: ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m
Mechanical Properties 68
(67)
Antenna dimensions (H x W x D) (mm) 1509 x 469 x 206
Packing dimensions (H x W x D) (mm) 1760 x 555 x 250
Antenna weight (kg) 31.0
Antenna packing weight (kg) 41.5 (Including clamps)
Radome material GFRPP*
1383
1509
Radome colour Light grey
Operational temperature (℃) –40 to +65
Frontal: 445 (at 150 km/h)
Wind load (N) Lateral: 265 (at 150 km/h)
Maximum: 590 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
59
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-D ASMC00015 4.2 kg 1
mast diameter: 50–115 mm
Downtilt kit-D ASMDT0D01 Mechanical downtilt: 0–16° 2.1 kg 1 (Separate packing)
y1 y2 y3 y4
1–2 3–4
r1 r2
2
Model: ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x14.5i/2x18i/
2x18i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 1.5 m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety–Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
3 Issue: 2021–12–20