Professional Documents
Culture Documents
PA R T S & AC C E S S O R I E S
Tank Bag 15
PAN AMERICA
Original Equipment windshield for added protection from See more road at night. Daymaker® Adaptive Headlamp
the elements. technology utilizes motorcycle sensors to determine the lean
57400454 angle of the bike and automatically projects additional light
Fits ’21-later RA1250 and RA1250S models. into corners to illuminate areas of the road that may be unlit
by an LED headlamp without this technology. The system
includes three LED elements per side in a separate lighting
B. ADVENTURE WINDSHIELD
unit located above the main Daymaker LED headlamp. The
This windshield is approximately 4.5 inches lower than the
LED elements illuminate in sequence based on motorcycle
Original Equipment windshield and allows most riders to see
lean angle, at 8 degrees, 15 degrees and 23 degrees. Each
over the windshield.
element will fade on during the activation and off during
Fits ’21-later RA1250 and RA1250S models. deactivation, appearing seamless to the rider. The system
functions when the headlight is in either high-beam or low-
57400456 11" Dark Smoke.
beam mode. Engineered by Harley-Davidson® for ideal fit and
57400499 11" Clear. function. Original Equipment on the Pan America™ 1250
Special model
C. TANK KNEE PAD KIT – PAN AMERICA™
69202757
These self-adhesive black rubber pads are easy to install and
Fits ’21-later RA1250 models. Original Equipment on
feature tapered raised ridges that complement the styling of
RA1250S models.
the seat, and add traction and comfort when knees grip the
tank. The two-piece kit offers protection for surfaces where
E. DAYMAKER LED FORWARD AUXILIARY LIGHTS
rider legs and riding gear contact the tank.
These rugged auxiliary LED lights offer three-way function that
57300291 will serve the adventure touring rider in any situation. Installed
Fits ’21-later RA1250 and RA1250S models. A. ADVENTURE WINDSHIELD – 18" CLEAR D. DAYMAKER ADAPTIVE HEADLAMP UPGRADE KIT as a pair, each light has a three-beam, four-lens design within
durable aluminum housing. In daylight these lights also make
the motorcycle more conspicuous to other motorists. The
factory-integrated design makes these lights easy to install
and a perfect fit and look on the bike. Three-way functional-
ity: Fog lights produce a wide pool of light directly in front of
the motorcycle to light the edge of the road in low-visibility
conditions. Driving lights punch light further down the road
to augment headlight performance. Off-Road beams deliver
275-meter forward visibility and 50-meter side visibility to light
up the trail (not street legal). Powder coated lightweight alumi-
num housing. High-impact hard-coated and anti-fog coated
outer lens. Installation requires separate purchase of Auxiliary
Light Installation Kit.
68000340
Fits ’21-later RA1250 and RA1250S models equipped with
Original Equipment Brush Guard or accessory Brush Guard
P/N 49000192, and ’14-later Touring models. Separate
purchase of model-specific installation kit is required.
Also available:
AUXILIARY LIGHT INSTALLATION KIT –
PAN AMERICA™
Installation kit includes a wiring harness, mounting brackets,
and switch pack for installing Daymaker® LED Forward
Auxiliary Lights.
68000343
Fits ’21-later RA1250 and RA1250S models.
B. ADVENTURE WINDSHIELD – 11" DARK SMOKE D. DAYMAKER LED FORWARD E. DAYMAKER LED FORWARD
AUXILIARY LIGHTS AUXILIARY LIGHTS
PAN AMERICA
Solo Seat for Harley-Davidson® Pan America™ 1250 models outstanding grip for rider comfort and confidence in any riding
can help keep you comfortable and alert until the next gas condition.
stop or camp site. Its enhanced bucket shape and spherical- 56100402
void foam construction is designed to reduce numbing pres- Fits ’21-later RA1250 and RH1250S models. Does not fit
sure points, and waterproof construction means you won’t models with original equipment heated grips. Models with
have a soggy bum after the rain quits. Factory fit retains your Bar End Mirrors require separate purchase of P/N 55801095
bike’s tool storage and high/low position features. Treat your qty (2).
passenger to a matching Sundowner™ Pillion (sold sepa-
rately) for two-up comfort. F. TACTICAL HEATED HAND GRIPS
52000478 Get more comfort and control with these heated grips. Heat
Fits ’21-later RA1250 and RA1250S models. settings are controlled with a military grade resistor, and use
a thermostat to automatically monitor and adjust heat output
B. SUNDOWNER PASSENGER PILLION - PAN AMERICA relative to the ambient temperature. A heating element wound
Provides a passenger Sundowner comfort with style that A. SUNDOWNER SOLO SEAT - PAN AMERICA internally to the grips provides consistent and even heat-
matches the Sundowner seat. Wider shape than Original ing. The grips feature a black rubber grid pattern with deep
Equipment pillion for added passenger comfort and confi- grooves that provide outstanding grip for rider comfort and
dence when riding on or off road. Designed for Original confidence in any riding condition.
Equipment mounting points and does not compromise rider 56100401
seat features. Waterproof construction and seam sealed stitch Fits ’21-later RA1250S and RH1250S models. RH1250S
lines prevent water from soaking into the foam and leaving the models require a Digital Tech update by a Harley-Davidson
rider with a damp bum. dealer.
52400249 E. TACTICAL HAND GRIPS
Fits ’21-later RA1250 and RA1250S models equipped with G. PAN AMERICA™ TALL RISERS
Sundowner Solo Seat P/N 52000478. Gain comfort with these Tall Risers, which move the handlebar
up and back 2 inches compared to the stock riser. Improves
C. REACH® SOLO SEAT – PAN AMERICA seated reach for riders with shorter arm length. Improves
The Reach® Solo Seat lowers seat height by 1 inch to optimize control and comfort when the rider is standing on the foot
fit for riders of shorter stature, while retaining full functional- pegs for off-road travel.
ity. Helps many riders get feet down with confidence at a stop. 55900241
Retains the two-position seat adjustability feature to fine-tune Fits ’21-later RA1250 and RA1250S models.
rider ergonomics. Retains easy access to under seat tool stor-
age. Replaces only the rider seat position. Matches the style of H. PAN AMERICA STEERING DAMPER KIT
the Original Equipment seat Rocks. Ruts. That deep sand washes. Ride it all with more
52000471 confidence after installing this Öhlins™ steering damper kit,
Fits ’21-later RA1250 and RA1250S models. designed and validated by Harley-Davidson specifically for the
Pan America™ 1250 model. This premium steering damper
D. TALLBOY® SOLO SEAT – PAN AMERICA enhances dynamic performance, especially during aggres-
For riders with a longer inseam, a Tallboy® Seat moves the rider B. SUNDOWNER PASSENGER PILLION - PAN AMERICA sive off-road riding. You’ll moto with less fatigue and enhanced
up from the stock seating position and places the body for a control. Get out there. Reduces fatigue by damping handle-
natural arm and leg reach to the controls. The Tallboy Seat bar motion while off-road. Kit includes bracket, damper, and
increases seat height by 1". Opens the rider’s hip/knee/ankle necessary Installation hardware. Factory designed for ideal fit
angles for more comfort, especially over longer distances. and function.
Gives the rider a more-commanding position and view of the 45700068 .
road or trail ahead. Retains the two-position seat adjustability Fits ’21-later RA1250 models. Original Equipment on
feature to fine-tune rider ergonomics. Retains easy access to RA1250S models.
under seat tool storage. Replaces only the rider seat position.
Matches the style of the Original Equipment seat.
52000472
Fits ’21-later RA1250 and RA1250S models.
Reach Seats
Tallboy Seats
D. TALLBOY SOLO SEAT – PAN AMERICA G. PAN AMERICA TALL RISERS – BLACK H. PAN AMERICA STEERING DAMPER KIT
10 PAN AMERICA™ PAN AMERICA™ 11
Vehicle Protection Vehicle Protection
A. SKID PLATE D. CENTER STAND
Tackle tough off-road situations with confidence. The acces- The Center Stand supports the parked motorcycle in an
PAN AMERICA
sory Skid Plate replaces the Original Equipment skid plate for upright position. Raises the rear wheel off the ground for
added protection from flying rocks and impacts during off- easier maintenance and tire changes. With the Center Stand
road riding. Heavy-duty aluminum construction. The factory- deployed, the parked motorcycle takes up less space than it
integrated design ensures proper fit and easy installation.The would leaning on its side stand. Pre-assembled with springs
Skid Plate also gives the motorcycle extra rugged style. in place.
49000191 92900066
Fits ’21-later RA1250 and RA1250S models. Fits ’21-later RA1250 models. Original Equipment on
RA1250S.
B. MUFFLER GUARD
Tackle tough off-road situations with confidence. This rugged, E. RADIATOR SHIELD
tubular steel guard is designed to protect the muffler from The mesh Radiator Shield attaches to the front of the radi-
damage during a tip-over event. The factory-integrated design ator to protect it from small stones and other debris, espe-
ensures a perfect fit and easy installation. cially when riding off road. The factory-integrated design of
47200732 this shield ensures a perfect fit and easy installation, and its
Fits ’21-later RA1250 and RA1250S models. mesh adds rugged style to the bike.
57200258
C. ADVENTURE JIFFY STAND FOR PAN AMERICA™ 1250 Fits ’21-later RA1250 and RA1250S models.
MODELS
Heading off-road on a Harley-Davidson® Pan America™ 1250 F. BRUSH GUARD*
model? This Adventure Jiffy Stand offers added stability on Tackle tough off-road situations with confidence. The Brush
soft surfaces and is an ideal factory fit. Jiffy stand features a Guard is designed to protect the radiator shroud and other
60% larger footprint compared to the Original Equipment jiffy A. SKID PLATE D. CENTER STAND components from damage due to passing brush along a
stand for more-secure support when parking the motorcycle trail, and in the case of a tip-over. Factory-integrated design
on soft ground. Does not alter the height of the jiffy stand to ensures a perfect fit and easy installation. Rugged tubular
maintain original lean of bike when parked. Factory designed steel construction and durable Satin Black finish matches
for easy installation, an ideal fit and maximum durability. Does motorcycle frame.
not change lean angle when motorcycle is cornering. 49000192
50000248 Fits ’21-later RA1250 models. Original Equipment on
Fits ’21-later RA1250 and RA1250S models without Adaptive RA1250S.
Ride Height.
50000264 G. PAN AMERICA™ HAND WIND DEFLECTORS
Fits ’21-later RA1250S models equipped with Adaptive Ride Add protection from the elements. These lightweight Hand
Height. Wind Deflectors help keep wind, insects, small stones and
small branches from impacting the rider’s hands and provide
added comfort in cool weather. Easy to install on Original
Equipment mounting points.
55900297
Fits ’21-later RA1250 models. Original Equipment on
RA1250S.
H. HEADLAMP GUARD
Tackle tough off-road situations with confidence. The rugged
mesh is designed to help protect the headlamp from impact
damage and debris and adds rugged styling. The factory-inte-
grated design ensures a perfect fit and easy installation. Does
not degrade headlamp performance.
67700555
Fits ’21-later RA1250 and RA1250S models.
PAN AMERICA
with SW-MOTECH™ for on- and off-road travel. Each piece offers a smooth aesthetic and presents a clean silhouette
has been designed and tested with the motorcycle to ensure on the motorcycle. Mounts are designed for easy installa-
factory-quality fit, durability and reliability, without compro- tion and removal of the luggage and leave a clean look when
mising motorcycle handling or lean angle. Both the cases and the luggage is removed. With a gasket in the lid, each piece
mounts have passed Harley-Davidson static tip-over tests. is waterproof and passes a rigorous Harley-Davidson water
The anodized or painted finish is easy to clean and prevents intrusion test. Each luggage piece has an integrated handle
oxidation. With a gasket in the lid, each piece is waterproof to make it easy to carry off the bike. Locks are keyed to the
and passes a rigorous Harley-Davidson water-intrusion test. motorcycle ignition.
The cases each have integrated handles and bungee eyes, and
a single key locks each case closed and locks the case to its E. PAN AMERICA SPORT TOP CASE
mount. The top case and its mount (sold separately) are designed to
maximize loading capacity without compromising ride and
A. PAN AMERICA ANODIZED ALUMINUM TOP CASE handling. Luggage volume capacity: 36 liters. Luggage weight
Luggage volume capacity: 38 liters. capacity is 10 kg (22 pounds).
Luggage weight capacity is 10 kg (22 pounds). A. PAN AMERICA ALUMINUM TOP CASE – CLEAR ANODIZED E. PAN AMERICA SPORT DETACHABLE TOP CASE
Fits ’21-later RA1250 and RA1250S models. Requires sepa-
53000814 Clear Anodized. rate purchase of Top Case Mounting System P/N 53000800.
Fits ’21-later RA1250 and RA1250S models. Requires
separate purchase of Top Case Mounting System P/N 53000751 .
53000800.
F. PAN AMERICA SPORT SIDE CASES
B. PAN AMERICA ANODIZED ALUMINUM SIDE CASES The mounts for left and right side cases are part of the motor-
Luggage volume capacity: Right case 37 liters, left case 45 cycle, so when the cases are removed there is no extra hard-
liters. Luggage weight capacity is 10 kg (22 pounds) in each ware left behind to clutter the styling. Luggage volume
case. capacity: Right case 30 liters, left case 35 liters. Luggage
weight capacity is 10 kg (22 pounds) in each case.
90202082 Clear Anodized.
Fits ’21-later RA1250 and RA1250S models. Requires 90201973
separate purchase of Side Case Mounting System P/N Fits ’21-later RA1250 and RA1250S models.
90202087.
G. PAN AMERICA SPORT TOP CASE LINERS
C. PAN AMERICA ANODIZED ALUMINUM TOP CASE – This water-resistant liner is designed to fit perfectly into
BLACK the Sport Top Case. This liner features heavy-duty zippers,
Luggage volume capacity: 38 liters. comfortable carrying handles and convenient D-rings
Luggage weight capacity is 10 kg (22 pounds). for optional shoulder straps.
53000816 Black. 53000862
Fits ’21-later RA1250 and RA1250S models. Requires Fits ’21-later RA1250 and RA1250S models. equipped with
separate purchase of Top Case Mounting System P/N Sport Side Cases P/N 90201971.
53000800.
B. PAN AMERICA ALUMINUM SIDE CASES – CLEAR ANODIZED F. PAN AMERICA SPORT SIDE CASES H. PAN AMERICA SPORT SIDE CASE LINERS
D. PAN AMERICA ALUMINUM SIDE CASES – BLACK Simplify packing and unpacking your motorcycle. These liners
Luggage volume capacity: Right case 37 liters, left case 45 are designed to fit perfectly into Sport Side Cases. These bags
liters. Luggage weight capacity is 10 kg (22 pounds) in each feature heavy-duty zippers, comfortable carrying handles and
case. D-rings for optional shoulder straps.
90202088 Black. 90202220
Fits ’21-later RA1250 and RA1250S models. Requires Fits ’21-later RA1250 and RA1250S models. equipped with
separate purchase of Side Case Mounting System P/N Sport Side Cases P/N 53000753.
90202087.
C. PAN AMERICA ALUMINUM TOP CASE – BLACK G. PAN AMERICA SPORT TOP CASE LINERS
D. PAN AMERICA ALUMINUM SIDE CASES – BLACK H. PAN AMERICA SPORT SIDE CASE LINERS
14 PAN AMERICA™ PAN AMERICA™ 15
Luggage Luggage
PAN AMERICA™ ADVENTURE SOFT LUGGAGE C. PAN AMERICA™ TANK BAG
The Adventure Soft Luggage line is intended for the hard- Keep essentials and a mobile device handy on the ride.
PAN AMERICA
core off-road rider. Designed specifically for motorcycle use, Designed specifically for Pan America™ 1250 and Pan
these durable bags resist damage if the bike tips over. The America™ 1250 Special models, the bottom of this tank bag
bag material is waterproof, exterior pockets have waterproof is co-molded to fit over the plastic cover on the top of the fuel
zippers, and the roll-top closure creates a weather-tight seal, tank for a secure, custom fit. Touch-sensitive window over the
so you can ride with confidence knowing that gear will stay top pocket that enables function of a mobile device stored in
dry no matter the conditions. The roll-top design and multiple the pocket. A water-resistant rain cover has a matching touch-
compression straps make it possible to cinch the load tightly, sensitive window. A compartment designed to hold an auxil-
and give this luggage flexible capacity. The bags are reflec- iary lithium battery is located below the device pocket, and
tive to enhance their visibility in low light conditions. Includes has a port for a charging cable. The interior of the bag is high-
universal mounting straps. visibility orange to make it easier to see contents. Side pock-
ets are fleece-lined. Bag has a top carry-handle, pockets and
A. PAN AMERICA ADVENTURE SOFT SADDLEBAGS dividers inside the bag. A leave-behind strap to secure bag
Adventure Soft Saddlebags are supported by the Side Case can be tucked under the front of the motorcycle seat when
Mounting System (sold separately). Luggage volume capacity bag is not in place. Luggage volume capacity is 8 liters. Weight
is 25 liters in each bag. Weight capacity is 10 kg (22 pounds) capacity is 2 kg (5 pounds).
in each bag. Sold as a set of two bags with mounting straps 93300129
Installation requires separate purchase of Side Case Mounting Fits ’21-later RA1250 and RA1250S models.
System P/N 90202087.
90202107 D. PAN AMERICA SIDE CASE MOUNTING SYSTEM
Fits ’21-later RA1250 and RA1250S models. Requires Factory integrated design mates perfectly to mounted points
separate purchase of Side Case Mounting System P/N on the motorcycle. Installing and adjusting the system is
90202087. simple and does not require specialty tools. Built to demand-
C. PAN AMERICA TANK BAG
ing Harley-Davidson specifications to ensure gear is protected
B. PAN AMERICA ADVENTURE DUFFEL BAG in the most-rugged conditions.
The Adventure Duffel Bag has extra-large volume capacity but 90202087
can be compressed to match the volume of the contents and Fits ’21-later RA1250 and RA1250S models.
be as compact as possible. Duffel can be secured to the Top
Case Mounting Plate (sold separately) behind the seat or on E. PAN AMERICA TOP CASE MOUNTING SYSTEM
the passenger pillion in front of a hard case. Luggage volume Required for installation of Aluminum Top Cases or Sport Top
capacity: 2,440 cubic inches (40 liters). Luggage weight Case. Optimized load points ensure system is durable. Can
capacity: 22 pounds (10 kg) P/N 90202087. also be used to support and secure Soft luggage.
93300142 53000800
Fits ’21-later RA1250 and RA1250S models. Fits ’21-later RA1250 and RA1250S models.
B. PAN AMERICA ADVENTURE DUFFEL BAG E. PAN AMERICA TOP CASE MOUNTING SYSTEM F. PAN AMERICA PASSENGER BACKREST PAD
16 PAN AMERICA™ PAN AMERICA™ 17
Screamin’ Eagle™ Performance Parts Accessories
A. SCREAMIN' EAGLE® QUICKSHIFTER FOR PAN 5 D. CARBON FIBER EXHAUST SHIELD INSERT
AMERICA™ 1250 MODELS The lightweight carbon fiber exhaust shield helps keep heat
PAN AMERICA
Shift in an instant. The Screamin’ Eagle® Quickshifter provides away from the rider’s leg while adding a touch of style to
clutchless up and down shifts without risking transmissions the exhaust shield. Hand-laid carbon fiber construction is
damage. When foot shift control is engaged fuel and igni- extremely light weight and strong. Designed for easy instal-
tion are cut within milliseconds, which unloads the transmis- lation over the existing exhaust shield. Reflective heat shield-
sion allowing you to fly through up-shifts without touching ing material bonded to the backside of the insert. Adds a style
the throttle or clutch. Shifter signal also blips the throttle for element to complement the Screamin Eagle® Street Cannon
seamless down-shifts without using the clutch. Precise shifts exhaust system.
are accomplished in an instant enabling smoother, stress-free 65400648
control in on- and off-road situations. Installation requires a Fits ’21-later RA1250 and RA1250S models.
dealer Digital Technician™ update/flash.
32700151 E. PAN AMERICA™ ROUND STYLE LOCKING FUEL CAP
Fits ’22-later RA1250 and RA1250S models. Installation Secure and safeguard your fuel supply. This locking fuel
requires dealer Digital Technician update. cap was designed and tested by Harley-Davidson specif-
ically for Pan America models. Key slot is hidden from view
B. SCREAMIN EAGLE® STREET CANNON MUFFLER – 5 and protected from the elements by a swing-away cover that
PAN AMERICA™ features Bar & Shield logo. Includes parts and instructions to
Realize a significant weight reduction and a deep, sporty match the locking cylinder to your factory key set.
exhaust tone with this Screamin Eagle® Street Cannon 61100188
muffler, designed specifically to fit right and look great on Fits ’21-later RA1250 and RA1250S models.
Pan America™ 1250 and Pan America™ 1250 Special models.
Weighs 42 percent less than the Original Equipment muffler. F. PREMIUM INDOOR/OUTDOOR COVER
Durable construction includes a titanium shell, carbon fiber This custom water-resistant motorcycle cover is an ideal fit
A. SCREAMIN' EAGLE QUICKSHITER FOR PAN AMERICA 1250 MODELS D. CARBON FIBER EXHAUST SHIELD INSERT E. PAN AMERICA ROUND STYLE
end cap and a stainless-steel mid-pipe. The deep and sporty for Pan America models and is adjustable to fit well with or
LOCKING FUEL CAP
exhaust note is stirring but not extreme. Engineered with the without luggage installed on the bike. Durable materials and
motorcycle for easy installation and seamless fit. Combine construction help protect the motorcycle from the elements
with a Screamin Eagle® Extreme-Flow Air Cleaner or Screamin when stored indoors or outdoors. Weather-shielded vents in
Eagle® High-Flow Air Cleaner for the ultimate Screamin Eagle® the top of the cover promote air circulation to reduce moisture
combo. build-up and minimize corrosion. Integrated storage pouch
65600389 Titanium. with compression buckles permits convenient packing and
Fits ’21-later RA1250 and RA1250S models. conserves valuable luggage space. Reflective Bar & Shield
logos make the motorcycle more visible in low light conditions.
C. SCREAMIN EAGLE AIR FILTERS The cover skirt features front and rear adjustable drawstrings
to cinch the cover and a belly strap to reduce ballooning in the
1. SCREAMIN EAGLE® HIGH-FLOW 5 wind. Convenient opening near the front wheel for a security
AIR FILTER – ROUND chain or cable, and internal pocket that accepts the optional
This washable and reusable filter is a direct replacement for Cover Alarm (P/N 69000038, sold separately)
the original equipment filter and provides the same air flow 93100070
performance as the original equipment. Fits RA1250 and RA1250S models.
29400020
Fits ’21-later RA1250, RA1250S and RH1250S models. G. 80GRIT™ RIDER FOOTPEGS
The rugged 80GRIT™ Collection foot controls combine form
2. SCREAMIN EAGLE® HIGH-FLOW 5 and function with the feel of an old-school BMX-style footpeg.
AIR FILTER – HOMEPLATE
This washable and reusable filter provides 5 percent more air Fits rider position on 21’-later RA1250 and RA1250S models.
flow to the engine compared to the original equipment filter. 50501383 Black.
29400426 50501390 Raw.
Fits ’21-later RA1250, RA1250S and RH1250S models.
H. 80GRIT™ SHIFTER PEG
3. SCREAMIN EAGLE® EXTREME-FLOW 5 The rugged 80GRIT™ Collection foot controls combine form
AIR FILTER – PAN AMERICA™ and function with the feel of an old-school BMX-style footpeg.
This washable and reusable filter is specifically designed for Aluminum material with rugged styled edges, which comple-
off-road environments with off-road specific filter media. ment the styling of the footpegs.
Provides 9 percent more air flow to the engine compared to 33600306 Black.
the original equipment filter to allow the engine to breathe in B. SCREAMIN EAGLE STREET CANNON MUFFLER – F. PREMIUM INDOOR/OUTDOOR COVER
PAN AMERICA Fits ’21-later RA1250 and RA1250S models.
all types of riding conditions. Clean, dry, and re-oil to reuse
29400427
Fits ’21-later RA1250 and RA1250S models.
1 2
REVOLUTION MAX
separate purchase of (qty 2) Front Brake Rotors P/N Michelin® Anakee Wild Off-Road Front Tire
41500195, (qty 10) Brake Rotor Hardware P/N 41500020 Fits ’21-later RA1250 and RA1250S models.
and Wheel Installation Kit P/N 42400038.
43100049 120/70R19.
40900814 17" Rear.
Michelin® Anakee Wild Off-Road Rear Tire
Fits ’21-later RA1250 and RA1250S models. Requires
Fits ’21-later RA1250 and RA1250S models.
separate purchase of Wheel Installation Kit P/N 42400039.
43200050 170/60R17.
B. WHEEL INSTALLATION KIT (ABS) – FRONT
Enables installation of front Laced wheel F. GENUINE HARLEY-DAVIDSON® OIL FILTER – BLACK
Trust the fit and performance. This Harley-Davidson® oil filter
42400038
is the same Original Equipment filter that is installed at the
Fits ’21-later RA1250 and RA1250S models. A. LACED WHEEL – 19" FRONT E. MICHELIN ANAKEE WILD OFF-ROAD E. MICHELIN ANAKEE WILD OFF-ROAD
factory. Designed and quality-tested for the Revolution® Max
FRONT TIRE REAR TIRE
1250 engine.
WHEEL INSTALLATION KIT (ABS) – REAR
Enables installation of rear Laced wheel. 62700280 Spin On
Fits ‘21-later Revolution Max engine equipped models.
42400039
Fits ’21-later RA1250 and RA1250S models.
G. PAN AMERICA™ ENDCAP STYLE FILTER WRENCH
C. MOTORCYCLE TIRE PRESSURE MONITORING SYSTEM 14900138 Spin On
The Harley-Davidson® Tire Pressure Monitoring System Fits ‘21-later Revolution Max engine equipped models.
(TPMS) displays current front and rear tire pressure on the on
the display screen and displays an indicator to alert the rider H. H-D™ GENUINE SYN BLEND MOTORCYCLE OIL
when tire pressure is low, and the pressure should be checked. Genuine SYN Blend Motorcycle Oil is a formulation engineered
by Harley-Davidson and factory tested for optimal perfor-
Fits ’21-later Pan America™ models (except Japan) equipped mance. This oil blends premium base stocks with premium
with laced wheels. Harley-Davidson proprietary additives for:
42300150 • Optimized durability.
• Minimal friction loss.
Fits ’20-later Touring and ’21-later Pan America (except Japan) • Wide ambient operating temperature.
with cast Original Equipment or Accessory wheels that accept
• Superior durability for engine components over a wide
a TPMS sensor.
operating range and temperature.
42300124A Supports tighter engine tolerances in colder temperatures.
Formulated for optimal clutch, engine, and transmission
D. HARLEY-DAVIDSON® TOOL KIT – PAN AMERICA™ performance. Facilitates long life of emission components,
A tool kit designed specifically for Pan America™ 1250 models. including exhaust catalysts.
Provides tools necessary for external service and mainte-
nance of your vehicle. Fits ‘21-later Revolution Max engine equipped models.
Kit Includes: 62600099 Quart, US
• 6" long nose locking pliers with wire cutter, Curved jaw line- 62600102 Quart, AP
man pliers with wire cutter
62600100 Litre, Can
• L-handle 1/4" square drive, 1/4" square to 1/4" hex adaptor,
1/4" 8mm square drive 62600101 Litre, EMEA/LA
• 32mm flat wrench, 36mm/22mm flat wrench
B. WHEEL INSTALLATION KIT (ABS) C. MOTORCYCLE TIRE PRESSURE F. GENUINE HARLEY-DAVIDSON G. PAN AMERICA ENDCAP STYLE I. HARLEY-DAVIDSON® ORIGINAL EQUIPMENT SPARK
• 14mm spark plug wrench, 6" adjustable wrench MONITORING SYSTEM OIL FILTER – BLACK FILTER WRENCH PLUGS
• 22mm X 2cm hex large
Stock replacement spark plugs.
• 1/4" hex drive bits: T25, T27, T30, T40, T45, T50, 4mm, 5mm,
6mm, with 9-bit holder 31600190
• 5 ft. length of 1.6mm safety wire, Duct tape roll 48-75mm Fits ‘21-later Revolution Max engine equipped models.
width X 2 meters, Zip ties: (5) 6" long and (5) 12" long
J. SCREAMIN' EAGLE® PERFORMANCE SPARK PLUGS
• 2 tool handle extensions and tool pouch
For Standard Compression Applications. Ribbed Core
14900127 Technology (RCT) provides resistance to plug fouling.
For use with ‘21-later Revolution® Max models. Designed with Original Equipment-style noise suppression
to limit electrical interference with radios and communica-
tion equipment. Plated Jacket helps prevent corrosion in
harsh weather and temperature conditions. Unique style with
Screamin’ Eagle logo. Sold in pairs
31600180
Fits ‘21-later Revolution Max engine equipped models.
I. HARLEY-DAVIDSON ORIGINAL EQUIPMENT
SPARK PLUGS
D. HARLEY-DAVIDSON TOOL KIT – PAN AMERICA K. H-D GENUINE SYN J. SCREAMIN' EAGLE
BLEND MOTORCYCLE OIL PERFORMANCE SPARK PLUGS
SPORTSTER S
HARLEY-DAVIDSON® SPORT
RH1250S | MINERAL GREEN METALLIC
Mid-Controls 24
22 REVOLUTION® MAX REVOLUTION® MAX 23
Wild One™ Collection Chassis Trim
WILD ONE™ COLLECTION H. FRONT AXLE NUT COVERS – GLOSS BLACK
Add daring, raw-and-rugged style with durable billet alumi- Cover the front axle in style. These smooth custom die-cast
num Wild One™ Collection accessories. Each is finished in Axle Nut Covers add the finishing detail to complete a custom
gloss black with bright, machined aluminum highlights, a vari- front end. Easy to install. Includes all necessary mounting
ety of textures and exposed hardware to communicate power, hardware. Sold in pairs
speed, and performance. 43000214
Fits ’21-later RA1250, RA1250S and RH1250S models.
A. WILD ONE™ COLLECTION – HAND GRIPS
Glueless design permits removal for servicing without damage I. REAR AXLE NUT COVERS – GLOSS BLACK
Rubber provides a positive grip while riding. Sold as a pair. Cover the rear axle in style. These smooth custom die-cast
56100462 Axle Nut Covers add the finishing detail to complete the
Fits ’21-later RA1250 and RH1250S models. Does not fit custom look. Easy to install. Includes all necessary mounting
models with original equipment heated grips. Models with hardware. Sold in pairs
REVOLUTION MAX
Bar End Mirrors require separate purchase of P/N 55801095 43000215
(qty 2). Fits ’21-later RA1250, RA1250S and RH1250S models.
56100463 Heated. A.WILD ONE COLLECTION – HAND GRIPS H. FRONT AXLE NUT COVERS – GLOSS BLACK
Fits ’21-later RA1250S and RH1250S models. RH1250S J. SWINGARM PIVOT BOLT COVERS – GLOSS BLACK
models require a Digital Tech update by a Harley-Davidson Conceal the swingarm pivot bolt for a clean style detail. These
dealer. easy to-install covers hide the Original Equipment hardware.
Gloss black finish.Kit includes left and right die-cast pivot bolt
B. WILD ONE COLLECTION – MIRRORS covers. Easy to install
Includes Left and Right mirror and mounting hardware. 47500047
56000241 Fits ’21-later RH1250S models. Does not fit with Passenger
Fits ’21-later Revolution® Max engine-equipped models. Footpeg Mount Kit P/N 50502192.
RH1250S models require separate purchase of Handlebar
End Cap Kits P/N’s 55801095, 55900246, 55900247, or K. SECURITY SIREN KIT
55900248. Plug in this very loud siren for additional peace of mind that
your motorcycle is protected. The siren sounds an alarm
C. WILD ONE COLLECTION – RIDER FOOTPEGS when the Factory Security System is activated. Easy-to-
Includes Left and Right footpegs. install plug-and-play connection to vehicles equipped with a
50502020 Harley-Davidson® Factory Security System. Homologated for
Fits ’21-later RH1250S models. International use
69000124
D. WILD ONE COLLECTION – CAM SPROCKET Fits ’21-later RA1250, RA1250S and RH1250S models, ’17-
MEDALLIONS later XG, ’02-’17 VRSC™, ’14-later XL, ’04-’17 Dyna®, ’03-later
Sold as a set of two adhesive covers. Softail® (except FXCW and FXCWC), ’02-later Touring and
14101557 ’09-later Trike models equipped with H-D® Smart Security
Fits ’21-later Revolution Max engine-equipped models. System or H-D® Factory Security System. ’21-later RA1250,
RA1250S and RH1250S models require separate purchase of
B. WILD ONE COLLECTION – MIRRORS C. WILD ONE COLLECTION – RIDER FOOTPEGS I. REAR AXLE NUT COVERS – GLOSS BLACK Adapter Wire P/N 69202993 and Cable Ties P/N 10065 (qty
E. WILD ONE COLLECTION – ALTERNATOR PLUG COVER
Includes Left and Right mirror and mounting hardware. 2). ’17-later XG models require separate purchase of
Mounting Bracket P/N 69201473. 2002-2006 VRSCA,
25701181 VRSCB, VRSCD Models require the purchase of a loop side
Fits ’21-later Revolution Max engine-equipped models. Velcro® strip, P/N 59274-01.
F. WILD ONE COLLECTION – CLUTCH MEDALLION Also available:
HDMC “dog tag” style logo adds subtle authenticity. Includes SIREN ADAPTER WIRE
mounting hardware. Required to install Security Siren P/N 69000124 on ’21-later
14101402 RA1250, RA1250S and RH1250S models.
Fits ’21-later Revolution Max engine-equipped models. 69202993
D. WILD ONE COLLECTION – CAM SPROCKET E. WILD ONE COLLECTION – ALTERNATOR J. SWINGARM PIVOT BOLT COVERS – GLOSS BLACK
MEDALLIONS PLUG COVER
SPORTSTER S
Pillion upholstery detail matches the accessory Sundowner
B. ENGINE GUARD* C. SUNDOWNER SOLO SEAT – SPORTSTER S MODEL Solo Seat P/N 52000510 (sold separately) for an integrated
The strength of steel. This tubular steel engine guard is look and fit on the motorcycle. Slightly larger width than the
designed to help protect the Sportster® S motorcycle from standard accessory pillion for added passenger comfort.
cosmetic damage in the event of a stationary or low-speed Seam sealed stitch lines prevent water from soaking into the
tip-over. Strong one-piece tubular steel guard. Black finish foam and leaving the passenger with a damp bum. Kit includes
matches the motorcycle chassis. Bolts onto existing mount- a rear fender extension designed to deflect spray or debris
ing points for clean style and easy installation with no modifi- from the passenger’s back. The pillion also provides a solid
cations. Includes all necessary mounting hardware. base for accessory Tail Bag luggage P/N 93300128 (sold sepa-
rately). Includes all necessary mounting hardware.
49000194 Gloss Black.
Fits ’21-later RH1250S models. 52400251
Fits ’21-later RH1250S models equipped with Sundowner
Solo Seat P/N 52000510. Installation requires separate
purchase of Passenger Footpeg Mount Kit P/N 50502192
and passenger footpegs.
E. PASSENGER PILLION
Share the ride and the fun. Designed for the Sportster S model,
the pillion is secured to the tail section behind the solo seat.
Pillion upholstery matches the Original Equipment rider seat
for an integrated look and fit on the motorcycle. Kit includes a
rear fender extension designed to deflect spray or debris from
the passenger’s back. The pillion also provides a solid base for
accessory Tail Bag P/N 93300128 (sold separately). Includes
all necessary mounting hardware.
A. QUICK-RELEASE COMPACT WINDSHIELD – DARK SMOKE D. SUNDOWNER PASSENGER PILLION 52400271
Fits ’21-later RH1250S models equipped with Original
Equipment solo seat. Installation requires separate purchase
of Passenger Footpeg Mount Kit P/N 50502192 and
passenger footpegs.
E. PASSENGER PILLION
SPORTSTER S
B. WILD ONE COLLECTION – REAR BRAKE LEVER E. WILD ONE™ COLLECTION – PASSENGER FOOTPEGS
Machined aluminum highlights.Complete this custom look Machined aluminum highlights. Includes left and right foot-
with additional accessories from the Wild One™ Collection. pegs. Complete this custom look with additional accessories
41600326 from the Wild One™ Collection
Fits ’21-later RH1250S models. 50502026
Fits ’21-later RH1250S models.
C. WILD ONE COLLECTION – SHIFTER PEG
Machined aluminum highlights.Complete this custom look F. TAIL BAG – SPORTSTER® S MODEL
with additional accessories from the Wild One Collection. A. MID-CONTROL KIT D. PASSENGER FOOTPEG MOUNT KIT This expandable Tail Bag luggage is designed to fit and look
33600338 ( SHOWN WITH PASSENGER FOOTPEG P/N 50502026) great on the Sportster® S model, and provides a convenient
Fits ’21-later Revolution Max engine-equipped models. luggage option for ride essentials that is easy to install and
remove. The Tail Bag is secured to the motorcycle tail section
with quick-release straps and cam-lock buckles. The bag inte-
rior is bright orange to make it easier to see the contents. A
carry handle makes it easy to move from bike to home or office
Includes waterproof rain cover. Luggage capacity is 5 pounds.
The main compartment volume is expandable from 8.2 liters
to 11.5 liters. Requires the Tail Bag be installed over the acces-
sory Passenger Pillion Kit P/N 52400271 or 52400251 (sold
separately).
93300128
Fits ’21-later RH1250S models. Requires separate purchase
of accessory passenger pillion for installation.
B. WILD ONE COLLECTION – REAR C. WILD ONE COLLECTION – SHIFTER PEG F. TAIL BAG – SPORTSTER S MODEL
BRAKE LEVER
IRON 883™
HARLEY-DAVIDSON® SPORTSTER®
XL883N | WHITE SAND PEARL
HARLEY-DAVIDSON® SPORTSTER®
XL1200X REEF BLUE
HARLEY-DAVIDSON® SOFTAIL
FXLRST | GUNSHIP GRAY
Flat-Out Bar 24
Clear Windsheild 24
LOW RIDER S ®
HARLEY-DAVIDSON® SOFTAIL®
FXLRS | GUNSHIP GRAY
Flat-Out-Bar 138
HARLEY-DAVIDSON® SOFTAIL®
FXBBS | FASTBACK BLUE
HARLEY-DAVIDSON® SOFTAIL®
FXFBS | WHITE SAND PEARL
Mid-Controls 132
SOFTAIL STANDARD ®
HARLEY-DAVIDSON® SOFTAIL®
FXST | VIVID BLACK
HARLEY-DAVIDSON® SOFTAIL®
FLFBS | MIDNIGHT CRIMSON/VIVID BLACK
HARLEY-DAVIDSON® SOFTAIL®
FLHCS | REDLINE RED/VIVID BLACK
SPORTSTER
Fits stock or accessory handlebars on ’15-’20 XG (except with a cutaway, technical look. The combination of gloss black
models equipped with Drag Bar P/N 55800225 or 55800238), and textured black surfaces visually reduces the size of the
’02-’17 VRSC™ (except VRSCF), ’96-later XL and XR, ’96-’17 side covers, and the raised “speed lines” impart a sense of
Dyna® (except FXDLS), ’96-’15 Softail® (except FLSTNSE, forward motion. The side covers feature improved mounting
FXSBSE and ’11-’12 FLSTSE) and ’96-’07 Touring models. tabs for easy and secure installation. Right-side oil tank cover
Installation requires separate purchase of Diamond-Black features a gloss black dipstick surround to add to the blacked-
Hand Grip P/N 56100199 (1") or 56100202 (7/8"). out look. Oil Tank Cover and Battery Cover are sold individually.
56000133A Right Hand (upright position). Fits ’14-later XL models.
56000134 Left Hand (upright position). C. TANK KNEE PAD KIT
57200139 Oil Tank Cover.
57200140 Battery Cover.
B. DIAMOND-BLACK HAND GRIPS – BAR END MIRRORS
Shroud your bike in mystery. This blacked-out hand and E. DIPSTICK BEZEL – GLOSS BLACK
foot control collection features distinctive knurled surfaces This gloss black Dipstick Bezel replaces the Original Equipment
that expose the raw billet aluminum for a dramatic contrast. chrome or satin silver bezel and completes the blacked-out
Designed to age and “break in” like a pair of comfortable look of the Sportster model’s right side oil tank cover. This
stone-washed jeans, the satin black finish will complement bezel complements the available Gloss Black LCD Oil Level
both high-gloss and denim paint colors. Designed for use with and Temperature Dipstick P/N 62700011. Includes replace-
Bar End Mirrors, these stripped-down Hand Grips feature ment push nut for installation.
glueless installation that can be easily removed for service
without damage. Grip End Caps are sold separately. 57200159
Fits ’04-later XL models.
56100199 For 1" Diameter Bar.
Fits ’02-’17 VRSC (except VRSCF), ’96-later XL and XR, ’96- F. SPORTSTER® FRONT SPOILER*
’17 Dyna (except FXDLS), ’96-’15 Softail (except FLSTNSE, The wedge shape of the spoiler accents the lean and narrow
FXSBSE and ’11-’12 FLSTSE) and ’96-’07 Touring models. A. ROUND BAR END MIRROR – SATIN BLACK look of the Sportster model. Injection-molded from high-
Installation requires separate purchase of Bar End Mirrors impact material and available Primed or Vivid Black finishes.
P/N 56000133 and 56000134 or End Caps P/N 55900114. Kit includes all mounting hardware.
Also available: Fits ’04-later XL models. Does not fit with Engine Guards,
HAND GRIP END CAPS Boom!™ Audio Cruiser Amp and Speakers or Down Tube Bags.
Easy to install smooth End Caps fill the open end of the
58882-04BDK Primed.
Diamond-Black Bar End Mirror Hand Grips if you remove the
mirrors or select to use only a single mirror. Sold individually. 58882-04DH Vivid Black.
55900114
Fits models equipped with Diamond-Black Hand Grips P/N
56100199 and 56100202.
SPORTSTER
50700040 Gloss Black.
Fits ’14-later XL883N, XL883L, XL1200CX, XL1200T, and FORWARD CONTROLS Shaped to divert air, rain and road debris around the rider, a windshield can add hours of riding comfort.
MID CONTROLS
XL1200X models and ’18-later XL1200NS and XL1200XS
3.67"
models. Does not fit with Rail Collection Sprocket Cover P/N
FURTHER FORWARD
34800032. For use with solo seat application only. MID CONTROLS 9.89"
Installation of Rear Set Controls requires removal of
passenger foot pegs, therefore removal of the Original
Equipment two-up seat and installation of a solo-only seat is K EEPING YOU COVERED
required. See your Dealer for solo seat options.
FOOT CONTROL POSITION OPTIONS
20.1 IN 19.5 IN 22. 1 IN
NO TOOLS
QUICK-RELEASE
MOUNT
STAINLESS STEEL
BRACKETS & BRACES
SPORTSTER
require Front Directional Relocation Kit P/N 68517-94A. height-19.1"; width-16.3".
Windshield dimensions: Overall height – 25.0"; width – 20.1".
D. QUICK-RELEASE SUPER SPORT WINDSHIELD
B. QUICK-RELEASE COMPACT WINDSHIELD Reduces the pounding of wind and shower of bugs but keeps
Combine the classic Harley-Davidson® windshield shape with the wind-in-the-hair feeling. The windshield mounts to the fork
a revolutionary new attachment system and you have the best tubes with elegant die-cast lever locking clamps, so the wind-
of style and function. The windshield mounts to the fork tubes shield does not require any “leave-behind” docking hardware.
with elegant die-cast lever-release clamps, so the windshield You get quick on-and-off convenience and a clean, custom
does not require any leave-behind docking hardware. You get look. No tools are required and the kit includes everything
C. SPORT WINDSHIELD KIT – C. SPORT WINDSHIELD KIT –
quick on-and-off convenience and a clean, custom look. No needed to install the windshield.
(58192-87A SHOWN) (58024-96A SHOWN)
tools are required and the kit includes everything needed to
57400345 11" Gradient.
install the windshield. The tough, hard-coated polycarbonate
Fits ’16-’20 XL1200CX models. Overall height – 13.8"; width –
windshield is available with traditional polished or gloss black
12.8".
horizontal and vertical braces.
Fits ’88-later XL (except XL1200CX, XL1200T, XL1200X, E. H-D® DETACHABLES™ QUARTER FAIRING KIT
XL1200XS and ’11-later XL883L and XL1200C). XL1200NS Sleek, racy styling and sweeping lines are the make-up of this
requires removal of headlight visor. Also fits ’91-’05 Dyna® innovative fairing. Its quarter-sized, detachable design gives
models (except FXDWG and FXDXT). your bike a whole new, sporty look that can be changed in an
58063-04 18" Clear – Polished Braces. instant. Available in Primed or Vivid Black. Requires the instal-
Windshield dimensions: Overall height – 26.8"; width – 19.7". lation of Detachable Docking Hardware Kit P/N 58164-96A.
58706-09 18" Clear – Black Braces. Fits ’88-’12 XL (except XL883C, XL883N, XL1200C, XL1200CX,
Windshield dimensions: Overall height – 26.8"; width – 19.7". XL1200T, XL1200V and XL1200X and ’11-later XL883L), FXR
58602-04 14" Light Smoke – Polished Braces. and ’95-’05 Dyna® models (except FXDWG, FXDXT and FXLR).
Windshield dimensions: Overall height – 22.8"; width – 19.5". A. QUICK-RELEASE SUPER SPORT WINDSHIELD 57070-98 Primed.
58703-09 14" Light Smoke – Black Braces. 57070-97DH Vivid Black.
Windshield dimensions: Overall height – 22.8"; width – 19.5".
Fits ’11-later XL883L and XL1200C and ’14-’20 XL1200T
F. HEADLAMP VISOR
Add an element of racy style to stock headlamps with these
models. Windshield dimensions: Overall height 22.8"; width
visors, available in Primed or Vivid Black.
19.5". 19"/18"
57801-11 18" Clear – Polished Braces. Fits ’95-later XL models (except XL883C, XL1200C, XL1200CX,
Windshield dimensions: Overall height 26.8"; width 19.7". XL1200V, XL1200X and XL1200XS), ’95-’05 Dyna models
57802-11 14" Light Smoke – Polished Braces. (except FXDWG and FXDXT), ’82-’94 FXR and FXRS models.
Windshield dimensions: Overall height 22.8"; width 19.5". 15"/14" Does not fit with Clip-On Handlebar P/N 55800647.
68129-97 Primed.
Fits ’16-later XL1200X and XL1200XS models.
68129-98DH Vivid Black.
57400318 19" Clear – Black Braces.
57400319 15" Light Smoke – Black Braces. G. LOCKING QUICK-RELEASE WINDSHIELD CLAMP
Kit includes one locking clamp and two matching keys.
D. QUICK-RELEASE SUPER SPORT E. H-D DETACHABLES QUARTER FAIRING KIT
WINDSHIELD –XL1200CX 57400006 39mm.
Fits ’88-later XL (except ’16-later XL1200CX, XL1200X and
XL1200XS) and ’91-’05 Dyna models (except FXDWG)
equipped with Quick-Release Style windshields.
Also available:
FRONT TURN SIGNAL RELOCATION KIT
67800452 Satin Black.
Fits ’10-’15 XL1200X models.
B. QUICK-RELEASE COMPACT WINDSHIELD – (GLOSS BLACK BRACES SHOWN) F. HEADLAMP VISOR G. LOCKING QUICK-RELEASE
WINDSHIELD CLAMP
52 CRUISER CRUISER 53
Seating – Reach® &Tallboy® Seating — Comfort & Touring
A. SUPER REACH® SOLO SEAT D. SIGNATURE SERIES® SOLO SEAT WITH RIDER
Get a little bit closer. Super Reach® forward position seats are BACKREST
designed to move riders with a shorter inseam even closer A perfect combination of foam density and shape has created
to the controls and to bring the legs closer together so that our most comfortable seat for long-haul touring. The wide
your feet rest firmly on the pavement. After hundreds of hours seating area will keep the rider extra comfy on a long trip and
of on-road and ergonomic testing, the seat shape and foam when you reach your destination, city driving will be easier
density were selected as the ideal position for riders 5’-0" to with the narrow nose that helps keep your legs closer together.
5’-4" tall. The Super Reach Seat moves the rider 1.5" closer to Seat features an easily removable adjustable rider backrest
the controls compared to stock seat on XL883L model, and that folds down for easier passenger mounting. Rider backrest
2" closer and .5" lower compared to stock seat on XL1200C has a 5-position height adjustment with 1.5" range and a wide
model. The nose is 1.0" narrower than the stock seat, and it range of forward/back angle adjustment with a quick twist of
is tastefully sculpted to look great with any size Sportster® the control knob. Matching Passenger Pillion P/N 52400053
fuel tank. The combination of premium textured and smooth is available for added versatility.
vinyl surfaces and charcoal gray stitching and embroidered 52000034
Bar & Shield logo really set the seat apart. For the ultimate Fits ’07-later XL models with 4.5 gallon fuel tank. Seat width
SPORTSTER
solo touring setup, add the Quick Release Rider Backrest P/N 15.0".
52300245.
52000062
52000207 Fits ’07-later XL models with 2.2 or 3.3 gallon fuel tank. Seat
Fits ’10-later XL models. Seat width 9.5". width 15.0".
Reach Seats
Tallboy Seats
C. TALLBOY SOLO SEAT F. SIGNATURE SERIES PASSENGER PILLION G. SUNDOWNER PASSENGER PILLION
54 CRUISER CRUISER 55
Seating — Comfort & Low Profile Seating — Low Profile
A. SUNDOWNER™ SEAT E. BADLANDER CUSTOM SEAT
The Sundowner™ Seat provides the maximum in long-riding It’s good to be bad. The low and lean Badlander Custom Seat
comfort. The deep-bucket design puts your body in the proper is designed to fit your bike like a glove. The Badlander Seat
touring position and the generous padding makes it comfort- delivers low-slung cruiser style from the fuel tank to the rear
able for both the rider and passenger as the miles are adding fender, and gives you the feeling of sitting “in” the bike and not
up. The dished shape provides added rider back support and on top of it. Ideal for both short riders needing to be closer to
the wide passenger pillion is shaped to minimize pressure the ground, or for tall riders who want to move back in the bike
points. without sitting higher, the seat delivers a riding position that
51739-07 is lower and generally farther back than the stock seat. This
Fits ’07-’09 XL models equipped with 4.5 gallon fuel tank. Badlander Seat features rich textured vinyl seating surfaces
Models not equipped with passenger pegs require separate for durability, and charcoal black leather side panels and dark
purchase of Passenger Footpeg Kit P/N 50203-04. Seat gray stitching and Harley-Davidson embroidered script for
width 14.5"; passenger pillion width 12.0". style. The narrow nose of the seat is sculpted to complement
any size Sportster® fuel tank.
51736-07
Fits ’07-’09 XL models equipped with 2.2 or 3.3 gallon fuel 52000211A
SPORTSTER
tanks. Models not equipped with passenger pegs require Fits ’10-later XL models. Models not equipped with passenger
A. SUNDOWNER SEAT (SHOWN WITH SMOOTH BUCKET LOW BACKREST PAD)
separate purchase of Passenger Footpeg Kit P/N 50203-04. pegs require separate purchase of Passenger Footpeg Kit
XL883N, XL1200N and XL1200X models also require P/N 50203-04 (’10-’13 models) or P/N 50500270 (’14-later
separate purchase of Retention Washer P/N 7487. models). XL1200CX requires separate purchase of Low
Seat width 14.5"; passenger pillion width 12.0". Profile Sissybar Upright P/N 52300403. Seat width 11.5";
passenger pillion width 5.5".
51507-04
Fits ’04-’06 XL models equipped with 4.5 gallon fuel tank.
Models not equipped with passenger footpegs require F. BOBBER SOLO SADDLE
separate purchase of Passenger Footpeg Kit P/N 50203-04 How low can you go? This minimalist solo seat takes the
E. BADLANDER CUSTOM SEAT
(’04-’13 models). Seat width 15.0"; passenger pillion width stripped-down garage-built look about as far as you can go.
12.5". The thick distressed black leather cover is bonded directly to
the formed metal seat pan and minimizes the foam filler and
51544-01A the extra height it brings. The raw-edge leather pad is joined
Fits ’83-’03 XL models. Seat width 15.0"; passenger pillion to the pan with brass rivets, and features matching brass
width 12.5". “Milwaukee Since 1903” trim that will develop a rich patina
with use. The Bar & Shield logo is embossed into the leather
B. BRAWLER® SOLO SEAT surface as a finishing touch. Easy to install, the bolt-on seat
When it’s time to go it alone, go in style. These premium qual- and a model-specific installation kit includes everything you
ity cowhide leather solo saddles feature a smooth, sleek need to get the bobber look. No cutting, welding or fabrica-
design that hugs the frame rails for a true custom look. The tion is necessary.
Brawler® seat’s design places the rider “in” the bike for a low-
slung riding position, and features a kick-up in the rear to hold 52000277 Distressed Black Leather.
the rider in place. The seating position is generally lower than Fits ’04-’06 and ’10-later XL, ’06-’17 Dyna® and ’08-’17 FLS,
stock, but not as far back as Badlander® or other low-profile FLSS, FLSTC, FLSTN and FXS models. Installation requires
seats. The top-grain leather seating surface and contoured separate purchase of model-specific Rigid or Spring Seat
foam padding provide a firm but luxurious feel. Seat does not B. BRAWLER SOLO SEAT Mounting Hardware Kit. Seat width 10.5".
fit with passenger pillions.
Also available:
52000269 RIGID MOUNT SADDLE INSTALLATION KIT
Fits ’10-later XL models. Does not fit with Rider Backrest Get the low, lean, minimalistic, garage-built look. Required
P/N 52300245. Seat width 12.5". for installation of Solo Saddle Kits P/N 52000277, 52000279,
52000278, 52000275, 52000276, 52000180, 54072-10,
C. CAFÉ SOLO SEAT 54373-10, 52000114 and 52000113. Kit includes mounting
There’s something about the placement of the rider that brackets and hardware.
makes the Café Solo Seat special. The one-up design features
a high back pad that holds the rider in place and provides a 52100016
direct connection to the bike. You sit “in” the bike, and your Fits ’10-later XL models.
hands and feet reach naturally to the controls. The low-slung
black vinyl-covered pad, the narrow nose and the tapered tail G. SOLO SADDLE
enhance the bike’s sporting profile and pays homage to the Add nostalgic bobber looks to your modern Harley-Davidson®
heritage of the iconic Café Racer™ style. motorcycle. Available in elegant leather, this solo seat features
a low-profile design that provides the minimalistic “just
52000260 F. BOBBER SOLO SADDLE (SHOWN WITH RIGID MOUNT SADDLE INSTALLATION KIT) enough to ride” look. The smooth metal seat pan and the
Fits ’10-later XL models. Does not fit with Rider Backrest simple frame cover leave a clean, finished appearance. Easy
P/N 52300245. Seat width 9.6". to install, the bolt-on seat and model-specific Spring Seat
Installation Kit include everything you need to get the bobber
D. LEATHER BADLANDER® SEAT look. No cutting, welding or fabrication is necessary and the
The traditional Badlander® seat’s low and lean style sets the seat can be removed and replaced with a touring seat for a
stage for your minimalist custom ride. The frame-hugging two-up night on the town.
rider seat and the slim tapered passenger pillion visually
stretch the bike and enhance the slammed look. The seat C. CAFÉ SOLO SEAT Fits ’04-’06 and ’10-later XL, ’06-’17 Dyna and ’08-’17 FLS,
shape stays low along its entire length and follows the lines of FLSS, FLSTC, FLSTN and FXS models. Installation requires
the bike with minimal disruption, and delivers a riding position separate purchase of model-specific Rigid or Spring Seat
that is lower and generally farther back than the stock seat. Mounting Hardware Kit. Seat width 10.5".
Ideal for both short riders needing to be closer to the ground, 52000279 Black Leather.
or for tall riders who want to move back in the bike without
52000276 Black Diamond.
sitting higher. This seat is wrapped in supple top-grain leather
and finished with an embroidered Harley-Davidson script. Kit
includes leather grab strap and mounting hardware.
52000259
Fits ’10-later XL models. XL1200CX requires separate
purchase of Low-Profile Sissy Bar Upright P/N 52300403.
Models not equipped with passenger pegs require separate
purchase of Passenger Footpeg Kit P/N 50203-04 (’10-’13 NOTE: Some Harley-Davidson® seats are made of leather.
models) or P/N 50500270 (’14-later models). Seat width Fine leathers or other natural materials WILL gain “character,”
11.5"; passenger pillion width 5.5". such as wrinkles or wear, with age. This is normal. A fine, aged
patina and character wrinkles are a sign of the extremely high-
quality materials used to construct your seat or backrest. The
appearance of scars or marks on the leather are a result of
using natural leather panels and should not be thought of as
an imperfection. Please use Harley-Davidson Leather
Protectant P/N 93600034 to protect your investment.
D. LEATHER BADLANDER SEAT G. SOLO SADDLE – BLACK LEATHER G. SOLO SADDLE – BLACK DIAMOND
56 CRUISER CRUISER 57
Seating — Pillions & Backrests Seating
A. PASSENGER PILLION E. ROAD ZEPPELIN® SEAT PAD
Bring a guest along on your solo seat-equipped Sportster® Experience ultimate comfort. Designed to ensure hours of
model. The cover and stitching of this Passenger Pillion comfort in the saddle, Road Zeppelin® Seat Pads are equipped
complements the solo seat. Kit includes grab strap and with a unique air bladder system that allows your weight to be
mounting hardware. supported evenly across the entire seating surface. Whether
52400130 ’16 XL883L Style. you have a low-profile seat or a larger, more comfortable seat,
Fits ’16-’20 XL883L models with Original Equipment solo you will feel the benefits. This air bladder system is designed
seat. Models not equipped with passenger pegs require to reduce pressure points, provide shock absorption and
separate purchase of Passenger Footpeg Kit P/N 50500270. reduce vibration. Unlike other mouth-inflated seat pads, the
Seat width 9.0". Road Zeppelin Pad features an easy-to-reach integrated hand
pump and metered air release valve that permits quick and
52400125 ’16 XL1200X Style.
controllable adjustment. You can easily adjust the comfort
Fits ’16-later XL1200X and XL1200XS models with Original
and support while seated on the pad. The UV-stable and snag-
Equipment solo seat. Models not equipped with passenger
resistant mesh cover allows air to circulate beneath the rider’s
pegs require separate purchase of Passenger Footpeg Kit
body, reducing the temperature trapped between the rider
P/N 50500270. Seat width 7.5".
SPORTSTER
and seat. Shaped to conform to most Harley-Davidson® seats,
52400127 ’16 XL883N Style. the pads feature adjustable mounting straps and a non-skid
Fits ’16-later XL883N models with Original Equipment solo surface to keep them in place. The hand-washable seat pad
seat. Models not equipped with passenger pegs require can be deflated and rolled for compact storage.
separate purchase of Passenger Footpeg Kit P/N 50500270.
52000327 Rider.
Seat width 7.5".
Fits rider position on all models equipped with Original
Equipment or accessory seats. Also fits passenger position
B. PASSENGER PILLION
on Touring models with large pillion area. Pad width – 14.0".
Low-profile, minimalistic Passenger Pillion features grey
stitching to complement the Original Equipment solo seat on A. PASSENGER PILLION — (52400130 SHOWN) A. PASSENGER PILLION — (52400125 SHOWN) E. ROAD ZEPPELIN SEAT PAD F. CIRCULATOR SEAT PAD – (RIDER SHOWN) 52400162 Passenger.
XL1200V and XL1200X models. Easy to install with included Fits Original Equipment and accessory passenger pillions.
hardware and grab strap. Pad length – 12.0"; width – 9.0".
51734-10
F. CIRCULATOR SEAT PADS
Fits ’10-’15 XL1200V and XL1200X models equipped with
These breathable Circulator Seat Pads feature 3D construc-
Original Equipment solo seat. Requires installation of
tion that promotes air movement and reduces heat buildup
passenger footpegs (sold separately). Pillion width 7.75".
where the rider’s body touches the seat or backrest. Designed
to keep the rider cool by reducing the perspiration buildup
C. PASSENGER PILLION between you and the seating surface, the Circulator Pad can
Bring a guest along on your solo-seat equipped Sportster be installed and removed in seconds for easy cleaning. The
model. The smooth cover and top stitching of this Passenger low-profile design minimizes seat-height change compared
Pillion complements the Original Equipment solo seat and to inflatable pads, while enhancing comfort with its shock-
the Reach® Solo Seat. Kit includes grab strap and mounting absorbing construction. Manufactured of UV-stable materi-
hardware. als. Elastic under-seat strap and non-slip base provide secure
51744-07A installation and the available Circulator Passenger Pillion Pad
Fits ’07-’15 XL models (except XL1200V and XL1200X) attaches to the rider pad with hook-and-loop tabs.
equipped with Original Equipment or Reach Solo Seats. 51074-10 Medium Seat Pad.
Requires installation of passenger footpegs (sold separately). Fits VRSC™, XG, XL and Dyna® models with Original
XL883N and XL1200N models also require separate Equipment and accessory seats. Pad width – 14.5".
purchase of Retention Washer P/N 7487. Pillion width 10.0".
51078-10 Passenger Pillion Pad.
D. QUICK-RELEASE RIDER BACKREST Fits Original Equipment and accessory passenger pillions.
Add exceptional comfort for open road and around town Pad width – 13.0".
riding. This detachable rider backrest is shaped for maximum
lower back support and keeps you in place without shifting G. REAR FENDER BIB
you forward in the saddle. Designed to complement Original Go solo in style. Wrapped in smooth vinyl to match Original
Equipment and accessory solo seats, the backrest’s forward/ Equipment or accessory solo seats, the Fender Bib features
back position can be adjusted up to 4.5" with a simple finger- an embossed Bar & Shield logo for added style. The molded
tip adjustment. The fold-down pad clears the way when throw- base is finished with a soft felt under-liner designed to protect
ing your leg over the bike and the backrest can be removed the fender’s painted surface.
from the bike with the push of a button–leaving behind just 52017-08
two elegant docking points. Complete kit includes upright, pad, Fits ’04-later XL models (except XL883N, XL1200CX,
A. PASSENGER PILLION — (52400127 SHOWN) B. PASSENGER PILLION G. REAR FENDER BIB H. TANK BRA
fender strut brackets and all required hardware. XL1200NS, XL1200T, XL1200V, XL1200X, and XL1200XS)
52300245 equipped with Original Equipment solo seat or Reach® Solo
Fits ’04-later XL models equipped with a solo seat. Not Seat P/N 51750-07 or 51751-07. Will not fit models equipped
compatible with Brawler® Solo Seat P/N 52000269, 52941- with Bobtail Rear Fender.
04B, 52000118, 52000119, Cafe Solo Seat P/N 52000260,
Sundowner™ Solo Seat P/N 52000203, Tallboy® Solo Seat H. TANK BRA
P/N 52000209, Solo Rigid or Spring Seat Mounting Kits, ’16- This Tank Bra is made with non-abrasive, fleece-backed vinyl
later Original Equipment XL883N Solo Seat, or Side-Mount material and features an embroidered Bar & Shield logo. It
License Plate Kits P/N 60947-10 or 60972-10. Installation of protects your fuel tank from scratches from keys, belt buckle,
H-D® Detachables™ Solo Luggage Rack requires additional etc.
purchase of Bolt P/N 3584 (Qty. 4). 62027-04
Fits ’04-later XL models equipped with 4.5 gallon fuel tank.
62030-04
Fits ’04-later XL models equipped with 3.3 gallon fuel tank.
61929-98
Fits ’97-’03 XL models equipped with 3.3 gallon fuel tanks.
SPORTSTER
2. 52710-07 Gloss Black. 52300040A Chrome.
B. LOW SISSY BAR UPRIGHT – CHROME B. LOW SISSY BAR UPRIGHT – GLOSS BLACK E. PASSENGER BACKREST PAD – E. PASSENGER BACKREST PAD –
XL883N STYLE XL1200X STYLE
C. STANDARD SISSY BAR UPRIGHT – CHROME C. STANDARD SISSY BAR UPRIGHT – F. LOW-PROFILE SISSY BAR UPRIGHT G. SLIP-OVER PASSENGER BACKREST PAD
GLOSS BLACK
60 CRUISER CRUISER 61
Backrests & Racks
PASSENGER BACKREST PADS 2
Choose from a wide variety of backrest pad sizes and shapes
to match your comfort and style demands. Designed to
complement Original Equipment and accessory seats, these
pads are engineered to fit specific sissy bar upright types.
SPORTSTER
Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98,
52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style picked the bike, it’s time to choose the options that match your ride to your personal dimensions.
Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage
Style Sissy Bar Upright P/N 52731-00 and Low Round Bar
Sissy Bar Upright P/N 52300022 or 52300024.
1. 52652-04 Smooth. For shorter riders, consider tailoring your fit by changing to a Reach® For taller riders, consider altering your ride by changing to a
2. 52626-04 Smooth Top-Stitched. Seat, Mid Foot Controls and lowered suspension height. Tallboy® Seat and Tallboy™ Handlebars.
DRAG
4 and the ground plays a major role in the quality of your ride. easily to hand, and does not pull you out of the seat when maneuvering.
ONTROLS
FORWARD CONTROLS
RWARD
FURTHER FORWARD
TROLS
MID-CONTROLS
LOW HEIGHT STANDARD HEIGHT
5
LS
MID-CONTROLS
SPORTSTER
Disguise the rear docking hardware with these easy-to-install
and FXSTD) and ’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC covers. The caps slide over the exposed docking points and
models and ’06 FLSTF models equipped with Detachable are held in place by a strong magnetic pull. The caps are easy
Sideplates. to remove when you wish to reinstall detachable accessories.
54290-11 Chrome. Covers are available with brilliant chrome or durable gloss
54291-11 Gloss Black. black finish to match your bike’s attitude. Sold in pairs.
Fits many accessory docking hardware kits. Refer to the
B. LED LIGHT KIT**
fitment matrix in this P&A Catalog or the Parts & Accessories
This fast-acting LED Light Kit operates as a supplemental
A. AIR FOIL PREMIUM LUGGAGE RACK – A. AIR FOIL PREMIUM LUGGAGE RACK – E. H-D DETACHABLES SOLO RACK – F. REAR DOCKING HARDWARE section of www.harley-davidson.com for details.
rear running light and brake light. The high, center-mount
position places the light in the line of sight of following vehi-
CHROME GLOSS BLACK GLOSS BLACK COVER KIT – CHROME 48218-10 Short Chrome (pair).
cles and the bright, fast-acting LED lamps get you noticed. 48220-10 Large Chrome (pair).
Wiring is concealed inside the rack tubes for a clean, custom 48035-09 Small Chrome (pair).
installation.
48221-10 Short Black (pair).
68000076 Red Lens. 48223-10 Large Black (pair).
Fits Air Foil Luggage Rack P/N 54290-11, 54291-11 and Air
Wing Sissy Bar Upright P/N 52300146 and 52300147. 48225-10 Small Black (pair).
Installation requires separate purchase of model-specific
Wiring Harness Kit. G. LOCKING H-D® DETACHABLES™ LATCH KIT
This unique lock replaces the camlock on your Harley-
Also available: Davidson® Detachables™ accessories, providing additional
LED LIGHT KIT WIRING HARNESS security and peace of mind when parking your vehicle. The kit
Required for installation of LED Light Kit on Air Foil Luggage includes two extended-reach barrel-style keys for easy access
Rack P/N 54290-11 or 54291-11. to the lock. Key registration and replacement service is avail-
able. Sold in pairs.
70683-08
Fits ’14-later XL models with Air Foil Luggage LED Light Kit Fits all models equipped with detachable Sideplates, Racks
P/N 68000076 or 68000077. and Tour-Pak® Luggage Carriers (except ’18-later Softail®
69368-11 models with HoldFast™ racks and uprights or ’09-later Touring
Fits ’04-’13 XL models with Air Foil Luggage LED Light Kit models equipped with detachable Solo Tour-Pak Rack).
P/N 68000076 or 68000077. 90300087 Chrome.
90300086 Black.
C. FIVE BAR SPORT LUGGAGE RACK – CHROME*
This rack brings touring flexibility to your motorcycle. Can H. H-D DETACHABLES LATCH KIT – CHROME
be used with H-D® Detachables™ or Rigid Mount Sissy Bar Decorative chrome latches are the perfect way to enhance
Sideplates. the appearance of your detachable accessories. Meticulously
53862-00 polished and chrome-plated, these easy-to-install Rotary
Fits ’04-later XL models (except XL1200CX) equipped with Latches are a direct replacement for the Original Equipment
Detachable Sideplates, ’06-’17 Dyna models (except FXDF, satin black parts and are a simple way to add a finishing touch
FXDFSE and ’10-’17 FXDWG) equipped with Detachable to your ride. Latches feature an easy-to-pull finger release to
Sideplates, ’84-’05 Softail models (except FLSTN and simplify access in hard-to-reach areas.
B. LED LIGHT KIT C. FIVE BAR SPORT LUGGAGE RACK – CHROME G. LOCKING H-D DETACHABLES LATCH KIT – CHROME
FXSTD), ’06-’17 FLST, FLSTC and FLSTSC models and ’06 12600036
FLSTF models equipped with Detachable Sideplates. Does Fits all models equipped with detachable Sideplates, One-
not fit with Round Bar Uprights P/N 52300018, 52300020, Piece Sissy Bar Uprights, Racks, and Tour-Pak Luggage
52300022 and 52300024. Mounting Racks (except ’18-later Softail models with
HoldFast racks and uprights).
D. CUSTOM TAPERED SPORT LUGGAGE RACK*
Smooth sweeping curves and the brilliant chrome or gloss
black finish define the look of this Sport Luggage Rack.
Designed to complement both round and square bar Sissy Bar
Uprights, this sleek rack adds a practical and stylish touch to
the motorcycle.
Fits ’04-later XL models (except XL1200CX) equipped with
H-D® Detachables™ Sideplates, ’06-’17 Dyna® models
(except FXDF, FXDFSE and ’10-’17 FXDWG) equipped with
Detachable Sideplates, ’84-’05 Softail® models (except FLSTN
and FXSTD) and ’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC
models and ’06 FLSTF models equipped with Detachable
Sideplates.
50300030 Chrome.
50300031 Gloss Black.
SPORTSTER
P/N 67800071 (Domestic) or 67800077 (International). All the pillion and the crossover straps feature a soft, non-scratch
other models require separate purchase of Turn Signal backing. Installation requires purchase of Saddlebag Support
Relocation Kit P/N 68732-02A (Domestic), 68733-02A rails and may require the purchase of a Turn Signal Relocation
(International) or Layback License Plate Kit P/N 60215-06. Kit. Large bag measures: 16.5" L x 11.5" H x 7" D. Internal
Models equipped with H-D® Detachables™ accessories capacity: 1,350CI. Weight capacity: 10 lbs/bag. Compact bag
require separate purchase of Docking Hardware Kit measures: 10" L x 11.5" H x 5.25" D. Internal capacity: 600CI.
P/N 53544-04 (if not already equipped). Weight capacity: 6 lbs/bag.
Fits ’82-later XL (except XL1200T), ’08-’17 Dyna® (except
B. SYNTHETIC LEATHER SADDLEBAGS FLD), ’84-’99 Softail®, and ’18-later Softail models equipped
C. BLACK STANDARD LINE THROW-OVER C. BLACK STANDARD LINE THROW-OVER
Styled with sweeping lines to complement the Sportster® with H-D® Saddlebag Supports. ’18-later Softail models
SADDLEBAGS – LARGE SADDLEBAGS – COMPACT
fender, these bags feature plenty of storage space for a ride require purchase of Turn Signal Relocation Kit P/N 67800802
to the store or to Sturgis. The rigid plastic tub, wrapped in rich or 68700830.
synthetic leather, offers long-term durability. The traditional
straps hide quick-disconnect closures for packing conve- 90201770 Large.
nience and the chrome buckles provide a look that’s pure 90201769 Compact.
Harley-Davidson. Luggage capacity: 2000 cubic inches total.
90330-08 D. SADDLEBAG SUPPORTS
Fits ’04-later XL models (except XL1200T, ’02-’03 XL883R, Keep your throw over-style saddlebags away from the wheel,
models equipped with Rear Axle Nut covers or Flat Lens Turn swingarm and brake caliper. Can be installed on models
Signals and models equipped with 2-into-1 exhaust). ’04-later equipped with rigid-mount sissy bar sideplates and uprights.
models require separate purchase of Turn Signal Relocation 90201324 Chrome.
Kit P/N 68732-02A (Domestic), P/N 68733-02A Fits ’00-later XL models (except XL1200S, XL1200T and ’02-
(International) or Layback License Plate Kit P/N 60215-06. ’03 XL883R). Does not fit with H-D® Detachables™
’11-’20 XL1200C fitment requires purchase of Turn Signal accessories.
Relocation Kit P/N 67800071 (Domestic) or 67800077 A RIGID LEATHER LOCKING SADDLEBAGS 90201433 Gloss Black.
(International). Fits ’00-later XL models (except XL1200S, XL1200T and ’02-
D. SADDLEBAG SUPPORTS – CHROME
’03 XL883R). Does not fit with H-D Detachables accessories.
F. TOUR-PAK® LUGGAGE
Interior will hold one full-face helmet or two half helmets.
D. SADDLEBAG SUPPORTS – GLOSS BLACK E. SINGLE-SIDED SWINGARM BAG – Kit includes backrest pad, interior rubber mat, hardware
BLACK LEATHER and instructions. Luggage capacity: 2500 cubic inches.
Dimensions: 18.5" W x 17.0" D x 13.0" H. Racks and docking
kits sold separately. International models may require sepa-
rate purchase of License Plate Relocation Kit P/N 60095-00A.
53690-06A Smooth Vinyl.
Fits ’04-later XL (except XL883N, XL1200C, XL1200CX,
XL1200N and XL1200T) equipped with Solo Tour-Pak® Rack,
’00-’17 Softail® (except FLS, FLSS, FLSTNSE, FLSTSE, FXCW,
FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD and ’09
FXSTSSE) equipped with H-D® Detachables™ Solo or Two-
Up Tour-Pak Rack and ’97-’13 Touring models equipped with
H-D Detachables Two-Up or Solo Tour-Pak Racks.
SPORTSTER
NOTE:
Screamin’ Eagle® Fully Adjustable Suspension components let you dial-in the ride, whether you’re cruising the A. SCREAMIN’ EAGLE FULLY ADJUSTABLE FRONT FORK KIT
When installing H-D® Braided Two-Piece Modular Brake Lines,
use the appropriate upper brake line for your handlebar, and
highway, carving up a country road or dodging city potholes. the following lower brake lines:
Non-ABS Diamondback™. 41800412
Non-ABS Diamond Black. 41800413
ABS Diamondback. 41800416A
ABS Diamond Black. 41800417A
RE
BO
UN
D
CO
M
PR
ES
SI
ON
SPORTSTER
50763-09 STANDARD FORWARD CONTROLS:
Fits models with H-D® male mount-style passenger footpeg FORWARD CONTROLS Places the legs for a “feet-in the-wind” laid-back profiling
supports (except Softail® models). Does not fit with Heel MID CONTROLS posture.
Raiser Footpeg Kit P/N 50178-09. Does not fit the rider 3.67"
position. FURTHER FORWARD FURTHER FORWARD MID CONTROLS:
MID CONTROLS 9.89" Achieves a comfortable foot-down riding position for the taller
C. MINI FOOTBOARD KIT rider.
This footboard kit can be installed in place of traditional
footpegs and provides a little additional leg support and E. STANDARD FORWARD CONTROL KIT*
more options to move your legs around on a long ride. Mini A. PASSENGER FOOTPEG MOUNT KIT – BLACK B. ADJUSTABLE PASSENGER FOOTPEG MOUNT FOOT CONTROL POSITION OPTIONS
Add the stretched-out look and extended riding position to
Footboards mount to the standard H-D® style footpeg KIT
your Sportster model. The complete kit includes all hardware
supports and can be used in many rider, passenger and high- necessary to convert your Sportster model from mid controls
way peg applications. to forward controls. Available in your choice of finishes, these
Fits rider position: forward controls add style and long range comfort. (Footpegs
’02-’17 VRSC™ models with forward controls (except and shifter peg not included.)
VRSCDX and VRSCF), ’15-’20 XG models (except XG750A),
’06-earlier XL, ’07-’10 XL883, XL883R, XL883C, XL1200C and Fits ’14-later XL models. Requires separate purchase of stock
XL1200R and ’07-’11 XL1200L, ’91-’17 Dyna® (except FLD) or accessory rider position footpegs with wear pegs that fit
and ’84-’17 Softail models with forward controls (except ’14-later XL1200 models.
FXCW, FXCWC, FXS, FXSB or FXSBSE). 50700020 Chrome with Black Peg Bracket.
Fits passenger position: 50700021 Black.
All models with H-D male-mount passenger peg mounts
Fits ’06-’13 XL models with mid-controls (except XL1200CP
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna
and XL1200CA). XL1200L requires separate purchase of foot-
and Softail models equipped with Shotgun exhaust). ’84-’17
3" Chrome pegs P/N 33134-07CAZ and 33135-07CAZ.
Softail models require separate purchase of Support Kit 4" Chrome
P/N 50454-09. Does not fit passenger position on ’18-later 33395-06A Chrome.
Softail models. 33397-07A Black.
Fits highway peg position:
All models with frame-mount or engine guard-mount F. FURTHER FORWARD MID CONTROL KIT
highway pegs (except Whiskers Adjustable Highway Bar Feel a little cramped when your feet are placed on the stan-
P/N 50855-09 and 50865-09). dard-location mid controls? This kit repositions the controls
50500139 Small 3.0" – Chrome. 3.0" forward of the stock location, eliminating the “knees-
high” riding attitude while maintaining a sporty upright riding
50500144 Small 3.0" – Gloss Black. posture. The forward location provides an open path for your
50500109 Large 4.0" – Chrome. feet to aid maneuvering the bike while parking and improves
50500124 Large 4.0" – Gloss Black. 4" Black 3" Black access to the jiffy stand for a shorter rider. Kit includes control
mounts, brake and shift levers, brake rod, mini-footboards
D. ADJUSTABLE HIGHWAY PEG SUPPORT KIT* with wear pegs and all hardware necessary to convert your
So you’re not the average Sportster® motorcycle rider. But mid or forward control-equipped Sportster model.
then again, there is nothing average about Harley-Davidson. 50700028 Gloss Black.
These chrome-plated Highway Peg Supports adjust easily and C. MINI FOOTBOARD KIT E. STANDARD FORWARD CONTROL KIT – E. STANDARD FORWARD CONTROL KIT – Fits ’14-later XL models.
quickly into three height-accommodating positions. Use with CHROME BLACK
your choice of H-D® small male mount-style footpegs (not (50700020 SHOWN) (33397-07A SHOWN) G. REAR SET FOOT CONTROLS – SPORTSTER MODELS
included). Includes all necessary hardware. Transform the on-street profile of your Sportster model.
49053-04A Moving the foot controls to a rear-mounted location takes
Fits ’04-later XL models with mid controls (except XL1200C). the riding position from a relaxed cruiser to a solo, aggres-
sive, curve-carving posture. When combined with a Clip-On
or Clubman Handlebar, the resulting hands-forward and feet-
back profile drapes the rider over the bike and makes you feel
a part of the machine. This complete gloss black Rear Set
Control Kit includes everything you need to move the brake
and shift lever to the rear passenger position. This unique kit
maintains the standard 1-down and 4-up shift pattern, and
can be installed with the Original Equipment low staggered
exhaust system. Kit reuses Original Equipment rider footpegs.
Installation requires removal of passenger footpegs and foot-
peg mounts. For solo rider application only.
50700040 Gloss Black.
Fits ’14-later XL883N, XL883L, XL1200CX, XL1200T, and
XL1200X models and ’18-later XL1200NS and XL1200XS
models. Does not fit with Rail Collection Sprocket Cover P/N
34800032. For use with solo seat application only.
Installation of Rear Set Controls requires removal of
passenger foot pegs, therefore removal of the Original
Equipment two-up seat and installation of a solo-only seat is
required. See your Dealer for solo seat options.
*WARNING: Do not use highway pegs under normal *WARNING: Installation of accessory Forward Control
stop and go operating conditions. Doing so could result Kits may affect cornering clearance. This could distract
in death or serious injury. the rider, causing loss of control, resulting in death or
serious injury.
D. ADJUSTABLE HIGHWAY PEG SUPPORT KIT F. FURTHER FORWARD MID CONTROL KIT – G. REAR SET FOOT CONTROLS – SPORTSTER
GLOSS BLACK MODELS
70 CRUISER CRUISER 71
Engine Guards Front Axle Nut Covers
A. ENGINE GUARD* E. CUSTOM GEAR SHIFT LINKAGES
The unique soft curve shape adds style to function. The one- Kick your custom into gear with this collection of high-qual-
piece Engine Guard is designed to complement the lines of ity Custom Shift Linkages. Available in a variety of designs to
the Sportster® motorcycle and the choice of finishes adds 1 match your bike’s style, these linkages feature aircraft qual-
the perfect finishing touch. Add your choice of Engine Guard ity rod ends for easy adjustment and smooth operation. The
Mounted Highway Pegs (sold separately) to change your foot easy-to-install linkage kit includes a transmission cover and
position on a long ride. decorative acorn nuts and bolts for a complete custom look.
Fits ’04-later XL and XR models (except XL1200CX, XL1200T, Fits ’04-later XL models equipped with standard forward
’16-later XL1200X, ’18-’20 XL1200XS and ’11-’20 XL883L). Will controls.
not fit with Front Spoilers. 1. 34840-09 Skull.
2
49060-04 Chrome. 2. 33778-09 Black Anodized Slotted.
49215-07 Gloss Black.
F. FRONT AXLE NUT COVERS
Fits ’11-’20 XL883L and ’14-later XL1200T ’20-models. Will not
Cover the front axle in style. Available in your choice of
SPORTSTER
fit with Front Spoilers.
styles, these custom Axle Nut Covers look great with Original
49287-11 Chrome. E. CUSTOM GEAR SHIFT LINKAGES
Equipment satin-finish fork sliders or add the finishing touch
to a complete chrome or blacked-out front end. Easy to install
Also available: (not shown) kits include all necessary mounting hardware. Sold in pairs.
ENGINE GUARD*
This highly-polished, chrome-plated guard matches stock Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-’20 XG,
plating and works great with the Sportster Forward Controls. ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Heritage
Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE,
49018-88C Chrome.
FXST-Aus, and FXSTD) and ’08-later Touring and Trike models.
Fits ’82-’03 XL models. ’82-early ’84 models require Bracket A. ENGINE GUARD – CHROME A. ENGINE GUARD – GLOSS BLACK ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB,
P/N 49014-85. Will not fit with Front Spoilers.
FXBBS, FXBR, FXBRS and FXLR models require separate
purchase of Front Axle Adapter Kit P/N 43000090. ’19-’20
B. MUSTACHE ENGINE GUARD*
1 2 3 FXDRS, ’18-later FXFB and FXFBS and ’20-later FXLRS and
Combine classic shape and modern function for a unique twist
FXLRST models. require separate purchase of Front Axle
on engine protection. The flow of this Engine Guard comple-
Adapter Kit P/N 43000159.
ments the bike’s traditional style while the gracefully curved
upper section incorporates highway pegs into the shape. The
integrated rubber pads offer a comfortable and slip-resistant
cushion for your feet while traveling the open road. One-piece 1. 43000212 Machine Cut.
engine guard kit includes all required mounting hardware. 2. 43000124 Dominion – Gloss Black.
3. 43000123 Dominion – Bronze.
Fits ’04-later XL and ’08-’13 XR models. Will not fit with Front
Spoilers. 4. 44117-07A Chrome – Die-cast.
44116-07A Chrome – Billet.
49000005 Chrome.
5. 43000026 Gloss Black – Die-cast.
49000006 Gloss Black.
43428-09 Gloss Black – Billet.
C. SOFT LOWERS 6. 43000177 H-D Motor Co. – Black.
Extend your riding season. Full coverage Soft Lowers provide 7. 44148-07A H-D Motor Co. – Chrome.
wind and mud protection for the rider’s legs and boots and 8. 44114-07 Aluminator.
minimize cold updrafts as the weather changes. Covers are 4 5 6
custom shaped to hug the engine guard to minimize flapping Also available:
and they clip in place for speedy installation as the weather
changes. Two-way zippered outer edge accommodates guard- Willie G Skull
mounted highway pegs in almost any position. Reflective Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-’20 XG,
piping provides added visibility and convenient zippered pock- ’08-later XL (except ’16-later XL1200X and XL1200XS), ’08-‘17
ets provide additional storage for maps or other small items. Dyna, ’07-later Softail (except Heritage Springer, FLSTNSE,
FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD)
57100211 and ’08-later Touring and Trike models. ’18-later FLDE, FLFB,
Fits ’04-later XL models (except ’11-later XL883L, XL1200CX, FLFBS, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXBR, FXBRS,
XL1200T, ’16-later XL1200X and ’18-’20 XL1200XS) FXLR and FXST models require separate purchase of Front
equipped with Engine Guard P/N 49060-04 or 49215-07. Axle Adapter Kit P/N 43000090. ’19-’20 FXDRS, ’18-later
Does not fit Mustache Engine Guards. FLSB, FXFB and FXFBS and ’20-later FXLRS and FXLRST
B. MUSTACHE ENGINE GUARD – CHROME B. MUSTACHE ENGINE GUARD – GLOSS BLACK models require separate purchase of Front Axle Adapter Kit
D. JIFFY STAND EXTENSION P/N 43000159.
Jiffy Stand Extension kits have been ergonomically designed
to simplify the deployment and retraction of the jiffy stand. 9. 43000096 Black.
7 8 9
The extension is shaped to simplify locating the tab with your 10. 43163-08A Chrome.
boot and aid in swinging the jiffy stand into position. The move Brass Collection
feels natural and adds confidence when parking your motorcy-
cle in a tight spot. Kit mounts to Original Equipment jiffy stand 11. 43000046
and includes all required mounting hardware. Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-’20 XG,
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08-
50462-11 Black. ’17 Dyna, ’07-later Softail (except Heritage Springer, FLSTNSE,
Fits ’07-later XL and ’08-’13 XR models (except XL50, FLSB, FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB,
XL883C, XL1200CX, XL1200L, XL1200V, ’07-’08 XL883, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-later Touring
XL883R, and XL1200R and ’09-’10 XL1200C). Does not fit and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS,
’09-later XL883N and XL1200N for International markets FLSL, FXBB, FXBBS, FXBR, FXBRS, FXLR and FXST models
AUS, BRZ, ENG, and HDI. require separate purchase of Front Axle Adapter Kit P/N
43000090. ’19-’20 FXDRS, ’18-later FLSB, FXFB and FXFBS
and ’20-later FXLRS and FXLRST models require separate
purchase of Front Axle Adapter Kit P/N 43000159.
C. SOFT LOWERS D. JIFFY STAND EXTENSION – BLACK F. FRONT AXLE NUT COVERS
72 CRUISER CRUISER 73
Chassis Trim — Front End Chassis Trim — Rear End
A. DOMINION™ COLLECTION FORK STEM COVERS G. SWINGARM – CHROME
Top it off with style. These easy-to-install Fork Stem Covers The ultimate chrome accessory, polished to the highest stan-
top off the triple tree for a cohesive look. A perfect comple- dard using bright plating to match Original Equipment chrome.
ment to other Dominion™ Collection Accessories, these Fork Affordable and convenient, with no troublesome exchanges
Nut Covers provide the finishing touch to your bike’s front end. necessary. Factory specifications guarantee exact fitment,
Sold in pairs. unparalleled quality and an affordable price. Stamped with
the Harley-Davidson Bar & Shield logo.
Fits ’06-’17 Dyna® models (except FXDB and FXDSE) and
’18-later Softail® models (except FXDRS, FXFB, FXFBS, FXLRS, 48434-05A
and FLSB). Also fits ’88-’13 XL (except XL1200CX, XL1200X, Fits ’05-later XL models (except XL1200T).
XL883N) ’95-’05 FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05
FXDS-CONV, ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and H. BUCKSHOT UPPER BELT GUARD – GLOSS BLACK
FLSTN, and ’86-’17 FLSTC models. Add the blacked-out look of the Nightster® motorcycle to your
Sportster® model. The perforated Buckshot design visually
45800117 Gloss Black. lightens the belt guard and adds a raw, purposeful edge to the
bike’s profile.
SPORTSTER
B. DEFIANCE COLLECTION UPPER FORK STEM COVERS
Top it off with style. These easy-to-install Fork Stem Covers A. DOMINION COLLECTION FORK STEM B. DEFIANCE COLLECTION UPPER FORK STEM G. SWINGARM – CHROME H. BUCKSHOT UPPER BELT GUARD – 60300196
continue the Defiance Collection to the top of the triple tree COVERS – GLOSS BLACK COVERS – CHROME GLOSS BLACK Fits ’04-later XL models.
for a cohesive look. The deep radial grooves define the style
of the Defiance Collection, and the choice of chrome, black I. BUCKSHOT LOWER BELT GUARD – GLOSS BLACK
or machine cut finishes complement your bike’s polished, This handsome gloss black steel guard replaces the Original
chrome or blacked-out front end components. Sold in pairs. Equipment plastic debris deflector to provide a rich smooth
surface that complements the upper belt guard and swing-
Fits ’06-’17 Dyna models and ’18-later Softail models (except arm. The perforated Buckshot design adds an open look while
FXDRS, FXFB, FXFBS, FXLRS, FXLRS, FXLRST and FLSB). Also protecting the belt from stones and debris.
Fits ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05 57100297
FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV and Fits ’04-later XL models.
’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and
’86-’17 FLSTC models J. BRAKE CALIPER KIT – CHROME
45500514 Chrome. Add the shine of chrome to your front end with this highly
45500515 Gloss Black. polished Chrome Front Brake Caliper Kit. Manufactured
from Original Equipment components for proven perfor-
C. UPPER FORK STEM COVERS – CHROME mance, these calipers are a great addition to the stock front
Highlighted with a unique Bar & Shield logo, these polished end or they add the finishing touch to a complete custom with
triple chrome-plated covers add an additional clean-looking chrome wheels, rotors and chrome fork sliders.
appearance to your upper fork. Kit comes complete with three 44395-00A Front – Single Disc.
covers, mounting hardware and wrench for easy on-the-spot Fits ’00-’03 XL, ’00-’07 Dyna® and ’00-’07 Softail® models
installation. (except Springer) equipped with single disc front brakes.
46129-98B Brake pads sold separately.
Fits ’88-’13 XL (except XL883C, XL1200C and XL1200S), ’95- B. DEFIANCE COLLECTION UPPER FORK STEM C. UPPER FORK STEM COVERS – CHROME I. BUCKSHOT LOWER BELT GUARD – J. BRAKE CALIPER KIT – CHROME
’05 FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV COVERS – GLOSS BLACK GLOSS BLACK (44395-00A SHOWN) K. SPROCKET HARDWARE – CHROME HEX HEAD
and ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, and FLSTN This kit includes highly polished, chrome-plated, grade 8 hex-
and ’86-’17 FLSTC models. head screws with chrome-plated washers, providing an extra
custom accent. The perfect addition to the chrome sprocket.
D. BAR & SHIELD LOGO REAR AXLE COVERS Made from the same Original Equipment bolts to ensure prod-
Die-cast cover conceals the side of the swingarm and axle. uct integrity. Also works with chrome belt sprocket covers and
Unique styling features an embossed Bar & Shield logo. Easy Original Equipment sprockets.
to install without removing the rear wheel. Kit includes all 94708-98
necessary mounting hardware. Fits ’91-later XL and ’93-’99 Dyna and Softail models.
Fits ’05-later XL883C, XL883L, XL883N, XL1200C, XL1200CX,
L. REAR SPROCKET BOLT COVER KIT
XL1200L, XL1200N, XL1200NS, XL1200V, XL1200X and
These chrome-plated covers with internal spring clips hide the
XL1200XS models. Also fits ’05-later XL models equipped with
Original Equipment sprocket bolts for a clean, custom look.
Low Rear Suspension Kit P/N 54731-04, 54733-04 or 54750-
Set of 5 covers.
05. (Will not fit models equipped with saddlebags or Chrome
Billet Shock Hardware Kit P/N 54337-05.) 43876-04
Fits ’04-later XL, ’93-’17 Softail and ’99-later Touring models
46399-05A Chrome.
with Original Equipment 7/16" hex head sprocket mounting
43013-09A Gloss Black. bolts (5/8" hex across the flats).
E. SWINGARM PIVOT BOLT COVERS – F. SHOCK BOLT COVERS – GLOSS BLACK L. REAR SPROCKET BOLT COVER KIT
BRASS COLLECTION
(61400517 SHOWN)
74 CRUISER CRUISER 75
Oil Cooler & Gauges Chassis Trim
A. PREMIUM OIL COOLER KIT D. OIL LEVEL AND TEMPERATURE DIPSTICK WITH
This oil cooler was designed specifically for Harley-Davidson LIGHTED LCD READOUT
to out-perform all other coolers in the industry. The cooler New and improved capacitive level sensing technology
features a unique “Turbulator” system that evenly distributes provides the highest degree of accuracy and durability. Now
oil across the cooling chambers. The air fins are designed to available in chrome and black, these dipsticks allow you to
efficiently dissipate heat. The oil cooler has been designed check your oil level and oil temperature with the push of a
to simplify installation and enhance performance. Kit comes button. Add function and style by replacing your stock dipstick
complete with mounting hardware and precut oil lines. with this hardworking version. No more grabbing a rag to pull
62700082 Side-Mount. your hot dipstick. No more oil drips on your pipes and on the
Fits ’04-later XL models. Does not include an integrated garage floor. These stylish yet hard-working dipsticks allow
thermostat. you to check your oil level and oil temperature with the push
of a button. Simply push the button and this dipstick lights
B. COMBINATION DIGITAL SPEEDOMETER/ANALOG up with a brilliant backlight. Oil level is indicated by a four-
TACHOMETER – 4" segment readout – it even reminds you to check your oil
Maintain the clean view over the handlebar. This unique when it is hot. Capacitive level sensing technology provides
SPORTSTER
Combination Speedometer/Tachometer allows you to moni- the highest degree of accuracy and durability. The waterproof
D. OIL LEVEL AND TEMPERATURE DIPSTICK D. OIL LEVEL AND TEMPERATURE DIPSTICK LCD (liquid crystal display) readout operates on a long-last-
tor engine speed without additional handlebar-mounted WITH LIGHTED LCD READOUT – CHROME WITH LIGHTED LCD READOUT – GLOSS BLACK
gauges. The unit mounts in the stock dash opening and is a ing, replaceable lithium coin-type battery (P/N 91800066).
direct plug-in installation. The backlit gauges include a large Display features a low battery indicator and press-and-hold
LCD (liquid crystal display) information screen that displays feature to toggle between Fahrenheit and Celsius.
odometer/tripmeter data, miles-to-empty readings, an easy- Fits ’04-later XL and XR models.
to-read segmented fuel display, a gear position indicator and
clock. This valuable information is available to the rider at a 62700009 Chrome.
glance. The gauge features push-button adjustable back- 62700011 Gloss Black.
A. PREMIUM OIL COOLER KIT
lighting with over 600 color tone options, allowing the rider
to adjust pointer, LCD and backlighting colors to match any E. OIL DIPSTICK WITH TEMPERATURE GAUGE
paint scheme or viewing preference. The digital speed read- Replace your Original Equipment oil dipstick with this custom-
ing can be easily toggled between mph and kph to simplify styled version featuring an easy-to-see mechanical tempera-
cross-border travel. Mileage reinstatement resides in the ture readout with Harley-Davidson logo. A chrome-plated cap
vehicle ECM so initial mileage will be uploaded at the time of completes the styling and provides an easy grip for removal.
installation. 63023-05 Fits ’04-later XL and XR models.
NOTE: As a result of different vehicle capabilities, the following 62667-87TA Fits ’82-’03 XL models.
exceptions apply: Gear position not available on ’04-’07
models, range function not available on ’04-’06 XL models F. DIPSTICK BEZEL – GLOSS BLACK
and ’04-’08 Dyna® models, fuel level function not available on This gloss black Dipstick Bezel replaces the Original Equipment
’04-’06 XL models. chrome or satin silver bezel and completes the blacked-out
70900475 Spun Aluminum Dial, MPH/km/h look of the Sportster® model’s right side oil tank cover. This
U.S. models. Fits ’14-later XL, ’12-’17 Dyna and ’11-’17 Softail® bezel complements the available Gloss Black LCD Oil Level
models equipped with 4" speedometer. XL models require and Temperature Dipstick P/N 62700011. Includes replace-
separate purchase of Fuel Sensor Kit P/N 61200008A to E. OIL DIPSTICK WITH TEMPERATURE GAUGE – E. OIL DIPSTICK WITH TEMPERATURE GAUGE – ment push nut for installation.
make use of the fuel level and range function. ’04-LATER SPORTSTER ’82-’03 SPORTSTER 57200159
70900100C Spun Aluminum Dial, MPH/km/h Fits ’04-later XL models.
Non-U.S. models. Fits ’14-later XL, ’12-’17 FXDB and FXDWG,
’11-’17 FXCWC, FXS and FXSB models with 4" speedometer. XL G. CUT BACK SIDE COVERS
models require separate purchase of Fuel Sensor Kit P/N Instantly transform the profile of your Sportster motorcycle.
61200008A for fuel level and range function. These Cut Back Side Covers feature a unique two-piece design
70900274 Spun Aluminum Dial, MPH/km/h with a cutaway, technical look. The combination of gloss black
Worldwide Models. Fits ’04-’13 XL (except XR, XL50 and ’04- and textured black surfaces visually reduces the size of the
’08 XL1200R), ’04-’11 Dyna models with 4" speedometer and side covers, and the raised “speed lines” impart a sense of
’08-’10 FXCW and FXCWC models. ’07-’13 XL models require forward motion. The side covers feature improved mounting
separate purchase of Fuel Sensor Kit P/N 61200008A to tabs for easy and secure installation. Right-side oil tank cover
make use of the fuel level and range function. Does not fit features a gloss black dipstick surround to add to the blacked-
XL883 models equipped with Screamin’ Eagle® 1200cc Stage out look. Oil Tank Cover and Battery Cover are sold individually.
I Conversion Kit P/N 29784-07 and 30003-10. Fits ’14-later XL models.
B. COMBINATION DIGITAL SPEEDOMETER/ANALOG TACHOMETER – 4" 57200139 Oil Tank Cover.
C. SPORTSTER® FUEL GAUGE KIT*
Keep an eye on your Sportster® model fuel level without 57200140 Battery Cover.
watching how many miles you have traveled. In-tank send-
ing unit employs capacitive sensing technology to accu-
rately monitor the fuel level and relays the information to a
handlebar-mounted LED indicator for at-a-glance viewing.
The segmented LED display is set into a distinctive housing
that replaces the brake master cylinder cover on the right
F. DIPSTICK BEZEL – GLOSS BLACK
hand control. The individual LED segments glow when the
tank is full and count down one by one as the fuel level drops.
Kit includes sending unit, LED master cylinder cover, wiring
harness and all necessary installation hardware.
75031-09 Black.
Fits ’07-later XL and ’08-’13 XR models. ’14-later XL models
require separate purchase of Electrical Connection Kit
72673-11.
*Some local regulations prohibit using colored lights during
vehicle operation on public streets. May not conform to local
lighting regulations.
C. SPORTSTER FUEL GAUGE KIT – BLACK G. OIL TANK COVER G. BATTERY COVER
76 CRUISER CRUISER 77
Chassis Trim Chassis Trim
A. FUEL TANK TRIM PANEL KIT – CHROME G. DOMINION™ COLLECTION FUEL CAPS
Set your fuel tank apart from the rest with this mirror chrome Add a custom touch to your tank. Styled to reflect your atti-
Fuel Tank Trim Panel. Fits around the stock fuel cap and is tude, these fuel caps are the perfect match for your ride. The
adhesive backed. fuel cap is easy to install and features a ratcheting design to
61653-04 ensure that the design faces the correct direction.
Fits ’04-later XL883C, XL1200C and XL1200L models. Also Fits ’92-later XL, ’92-’17 Dyna® (except ’04-’17 FXD, FXDX,
fits ’04-later XL models equipped with a Sportster® Large ’05-’06 FXDC and ’07 FXDSE), ’00-later Softail® (except
Capacity Fuel Tank and Installation Kit P/N 62999-04 or FXSTD, and ’07-’08 FXSTSSE), ’94-later Road King® and
62999-07. ’15-later Freewheeler® models. Does not fit models equipped
with Original Equipment locking or tethered fuel caps or
B. BATTERY SIDE COVER – CHROME Softail models with Low-Profile Chrome Fuel Tank Console
This chrome-plated cover is designed for use with the Harley- P/N 71208-07. Use on ’13-’14 FXSBSE requires removal of
Davidson® AGM sealed maintenance-free batteries and can stock flush mount trim ring.
be used in combination with Battery Top Cover P/N 66367-
97 or 66368-97. 61100107A Gloss Black.
SPORTSTER
61100106 Bronze.
66718-01 A. FUEL TANK TRIM PANEL KIT – CHROME G. DOMINION FUEL CAP – GLOSS BLACK
Fits ’97-’03 XL models and ’97-’05 Dyna® models.
H. FLUSH-MOUNT FUEL CAPS
Emphasize the long and lean look of the fuel tank. This Flush-
C. LOUD HORN KIT
Mount Fuel Cap Kit offers a pop-up filler design that replaces
Grab everyone’s attention. Engineered to be 3dB louder (at 2
the Original Equipment twist-on fuel cap. A simple push and
meters) than the Original Equipment front-mounted horn, this
the fuel filler cap pops up to provide ample grip, even while
Horn Kit is tuned to a frequency that helps cut through the
wearing gloves. Easy to install, the cap assembly screws into
background noise. Designed to be a plug-in replacement for
position and the self-adhesive decorative ring finishes the look.
the factory horn, this easy-to-install option is available in your
Complete kit includes screw-in mount, pop-up cap and match-
choice of brilliant chrome or gloss black finish. The traditional
ing trim ring.
Bar & Shield logo adds a classic finishing touch.
Fits ’98-later XL models equipped with 3.3 gal (12.5 L) fuel
Fits ’96-later XL and ’08-’13 XR models with front-mount horn.
tank.
69000007 Chrome.
63133-10B Chrome.
69000009 Gloss Black.
63134-10B Gloss Black.
D. LOUD SIDE-MOUNT HORN KIT Fits ’98-later XL models equipped with 2.1 gal (7.9 L) or 4.5 gal
Get noticed. Ride with increased confidence with a loud horn (17.0 L) fuel tank. Does not fit ’04-’10 XL1200C models.
that will grab everyone’s attention. Engineered to be 5dB 63139-10B Chrome.
louder (at 2 meters) than the ’13-earlier Original Equipment
side-mounted horn. The loud horn is stock on ’14-later models 63140-10B Gloss Black.
equipped with side-mount horns. Designed to be a plug-in
replacement that is easy to install. Fits all H-D® side-mount
horn covers.
69060-90H
B. BATTERY SIDE COVER – CHROME G. DOMINION FUEL CAP – BRONZE
Fits ’91-’17 VRSC™, ’91-later XL1200C and XL1200V, ’91-’17
Dyna (except ’14-’17 FXDL), ’91-’17 Softail® (except FLSTS,
FLSTSC, FXCW, FXCWC, FXS, FXSB and FXSBSE), ’91-later
Touring and ’09-later Trike models. Stock on ’14-later models
equipped with a side-mount horn.
C. LOUD HORN KIT – CHROME C. LOUD HORN KIT – GLOSS BLACK H. FLUSH-MOUNT FUEL CAP – CHROME
D. LOUD SIDE-MOUNT HORN KIT E. SIDE-MOUNT HORN KIT – CHROME H. FLUSH-MOUNT FUEL CAP – GLOSS BLACK
78 CRUISER 18" CRUISER 79
Windshields Windshields
A. QUICK-RELEASE COMPACT WINDSHIELD B. QUICK-RELEASE SUPER SPORT WINDSHIELD
Combine the classic Harley-Davidson® windshield shape with Reduces the pounding of wind and shower of bugs, but keeps
a revolutionary new attachment system and you have the best the wind-in-the-hair feeling. Ideal for a cool morning ride, the
of style and function. The windshield mounts to the fork tubes 14" sleek profile of the Super Sport Windshield hugs the front
with elegant die-cast lever-release clamps, so the windshield headlamp for a sporty look. The windshield mounts to the fork
does not require any leave-behind docking hardware. You get tubes with elegant die-cast lever locking clamps, so the wind-
quick on-and-off convenience and a clean, custom look. No shield does not require any leave-behind docking hardware.
tools are required and the kit includes everything needed to You get quick on-and-off convenience and a clean, custom
install the windshield. The tough, hard-coated polycarbonate look. No tools are required and the kit includes everything
windshield is available in your choice of traditional polished or needed to install the windshield.
gloss black horizontal and vertical braces. 57300-06 19" Light Smoke.
Fits ’06-’17 Dyna® (except FLD, FXDWG, FXDF and FXDSE) and Fits ’06-’17 Dyna® (except FLD, FXDWG, FXDF and FXDSE)
’18-later FXBB, FXBBS, FXLR and FXST models. FXDLS models and ’18-later Softail® FXBB, FXBBS, FXLR and FXST models.
require the removal of Original Equipment Wind Deflector. FXDLS models require the removal of Original Equipment
Wind Deflector. Windshield dimensions: Overall height-25.0";
58346-06 18" Clear – Polished Braces. width-20.1".
Windshield dimensions: Overall height – 26.8"; width – 19.7".
57301-06 19" Light Smoke.
58348-06 14" Light Smoke – Polished Braces. Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-later
Windshield dimensions: Overall height – 22.8"; width – 19.5". FXBR and FXBRS models. Windshield dimensions: Overall
Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-later height – 25.0"; width – 20.1".
FXBR and FXBRS models. 57838-08 19" Light Smoke.
58387-06 18" Clear – Polished Braces. Fits ’88-later XL (except XL1200CX, XL1200T, XL1200X and
Windshield dimensions: Overall height – 26.8"; width – 19.5". ’11-later XL883L and XL1200C) and ’91-’05 Dyna models
(except FXDWG and FXDXT). XL Custom models require
58444-06 14" Light Smoke – Polished Braces. Front Directional Relocation Kit P/N 68517-94A. Windshield
Windshield dimensions: Overall height – 22.8"; width – 19.5". dimensions: Overall height – 25.0"; width – 20.1".
Fits ’08-’17 FXDF and FXDFSE models.
C. H-D DETACHABLES TALL WINDSHIELD –
57338-08 19" Clear – Polished Braces.
SWITCHBACK™ MODEL
Windshield dimensions: Overall height – 27.0"; width – 19.6".
DYNA
Get maximum protection from the wind. The detachable
58617-09 19" Clear – Black Braces. shield can be removed and reinstalled in seconds to tailor your
Windshield dimensions: Overall height – 27.0"; width – 19.6". bike to different riding conditions.
58630-09 15" Light Smoke – Black Braces. 57400120 20" Clear.
Windshield dimensions: Overall height – 23.0"; width – 19.6". Fits ’12-’16 FLD models. Windshield dimensions: Overall
Fits ’88-later XL (except XL1200CX, XL1200T, XL1200X, height – 27.0"; width – 24.0".
XL1200XS and ’11-later XL883L and XL1200C). XL1200NS
requires removal of headlight visor. Also fits ’91-’05 Dyna
models (except FXDWG and FXDXT).
58063-04 18" Clear – Polished Braces. A. QUICK-RELEASE COMPACT WINDSHIELD – POLISHED BRACES
Windshield dimensions: Overall height – 26.8"; width – 19.7".
58706-09 18" Clear – Black Braces.
Windshield dimensions: Overall height – 26.8"; width – 19.7".
58602-04 14" Light Smoke – Polished Braces.
Windshield dimensions: Overall height – 22.8"; width – 19.5".
58703-09 14" Light Smoke – Black Braces.
Windshield dimensions: Overall height – 22.8"; width – 19.5".
Fits ’93-’05 FXDWG and ’86-’15 FXST, FXSTB and FXSTC
models.
59802-05 19" Clear – Polished Braces.
Windshield dimensions: Overall height – 23.8"; width – 21.4".
57199-05 16" Light Smoke – Polished Braces.
Windshield dimensions: Overall height – 20.8"; width – 21.4".
B. QUICK-RELEASE SUPER SPORT WINDSHIELD (57300-06 SHOWN)
A. QUICK-RELEASE COMPACT WINDSHIELD – 15", GLOSS BLACK BRACES B. QUICK-RELEASE SUPER SPORT WINDSHIELD C. H-D DETACHABLES TALL WINDSHIELD –
(SHOWN WITH TURN SIGNAL RELOCATION KIT) (57838-08 SHOWN) SWITCHBACK
80 CRUISER CRUISER 81
Windshields Windshield Accessories
A. QUICK-RELEASE TOURING WINDSHIELD D. H-D® DETACHABLES™ QUARTER FAIRING KIT*
The Touring Windshield features an aerodynamic design Sleek, racy styling and sweeping lines define this innovative
shaped to provide hours of riding comfort. The additional fairing. The quarter fairing-sized detachable design gives your
center width directs airflow past the hand grips and deflects bike a whole new sporty look that can be changed in an instant.
rain and road debris around the rider. The windshield mounts Available in primed or Vivid Black finish, the fairing is inter-
to the fork tubes with elegant die-cast lever-release clamps, changeable with H-D® Detachables™ Windshields, giving you
so the windshield does not require any “leave-behind” docking plenty of options for cruising or touring. Plus, the windshield
hardware. You get quick on-and-off convenience and a clean, has a two-position adjustment feature for flexibility.
custom look. No tools are required and the kit includes every-
thing needed to install the windshield. The tough, hard-coated Fits ’88-’12 XL (except XL883C, XL883N, XL1200C, XL1200CX,
polycarbonate windshield features traditional polished hori- XL1200T, XL1200V XL1200X and ’11-later XL883L), FXR
zontal and vertical braces. and ’95-’05 Dyna® models (except FXLR, FXDWG and
FXDXT). Requires the installation of Docking Hardware Kit
57015-06 19" Clear. P/N 58164-96A.
Fits ’06-’17 Dyna® models (except FLD, FXDF, FXDSE and
FXDWG). FXDLS models require the removal of the stock 57070-98 Primed.
wind deflector. Windshield dimensions: Overall height – 57070-97DH Vivid Black.
26.3"; width – 25.0".
E. HEADLAMP VISOR KITS*
B. H-D® DETACHABLES™ SUPER SPORT WINDSHIELD Add an element of racy style to stock headlamps with these
Super is an apt description for this do-it-all windshield with visors. Available in Primed or Vivid Black Harley-Davidson®
detachable convenience and sport styling. The windshield paint.
mounts to the fork tubes with H-D® Detachables™ Docking
Hardware (sold separately) for easy on-and-off convenience Fits ’95-later XL (except XL883C, XL1200C, XL1200CX,
and a quick return to a sporting profile. XL1200V, XL1200X and XL1200XS), ’95-’05 Dyna (except
D. H-D DETACHABLES QUARTER FAIRING KIT – E. HEADLAMP VISOR KIT – VIVID BLACK FXDXT and FXDWG) and ’82-’94 FXR and FXRS models. Does
57965-97A 18" Light Smoke. VIVID BLACK not fit with Clip-On Handlebar P/N 55800647.
Fits ’93-’05 FXDWG, ’80-’86 FXWG and ’84-’15 FXST, FXSTB
and FXSTC models. Use Docking Hardware Kit P/N 58350- 68129-97 Primed.
96. Windshield dimensions: Overall height – 22.3"; width – 68129-98DH Vivid Black.
17.8". Fits ’84-’99 FXST, FXSTC and ’91-’05 FXDWG models.
DYNA
Shown with: 68971-98B Primed.
DOCKING HARDWARE FOR H-D DETACHABLES
WINDSHIELDS F. MID-FRAME AIR DEFLECTOR
58164-96A For 39mm Forks.
Improve rider comfort during the summer riding season.
Required for installation of H-D Detachables Windshields on Designed for severe duty and extreme temperature appli-
’88-later XL (except XL1200CX, XL1200X, XL1200XS and ’11- cations, these inconspicuous black deflectors attach to the
later XL1200C) and ’91-’05 Dyna models (except FXDWG and frame and surround the top of the rear cylinder head. The
FXDXT). XL and Dyna models with Front Turn Signals scoop shape captures the moving air and uses the flow to
originally located on the upper triple clamp may require the direct the heat down and away from the rider to improve
additional purchase of Turn Signal Wiring Kit P/N 72389-96. comfort. Kit includes all required mounting hardware.
58350-96 For 41mm Forks. 29200011
Required for installation of H-D Detachables Windshields on Fits ’06-’17 Dyna models. ’06-’11 models require removal of
’93-’05 FXDWG, ’80-’86 FXWG and ’84-’17 FXST, FXSTB and Original Equipment coil cover and separate purchase of Coil
FXSTC models. Mounting Screws P/N 4717A (Qty 2). Does not fit with
accessory Coil Covers P/N 31709-04 or 74616-04. Does not
C. SPORT WINDSHIELD KIT fit with Digital Oil Pressure Gauge P/N 75138-09 or 75340-09.
Formed of polycarbonate and hard-coated to resist scratching.
Light smoke windshield is contoured to fit the headlamp and G. SOFT LOWERS
incorporates adjustable four-point mounting. Functional styl- Extend your riding season. Full coverage Soft Lowers provide
ing helps deflect wind to reduce upper body fatigue. wind and mud protection for the rider’s legs and boots and
minimize cold updrafts as the weather changes. Covers are
58192-87A 18" Light Smoke. custom-shaped to hug the engine guard to minimize flap-
Fits ’88-later XL (except XL883C, XL1200C, XL1200CX, ping and they simply clip in place for speedy installation as
XL1200T, XL1200, XL1200XS and ’11-later XL883L). the weather changes. Two-way zippered outer edge accom-
XL1200NS requires removal of headlight visor. Also Fits ’95- modates guard-mounted highway pegs in almost any posi-
’05 Dyna models (except FXDWG and FXDXT). Includes black tion. Reflective piping provides added visibility and convenient
A. QUICK-RELEASE TOURING WINDSHIELD – CLEAR F. MID-FRAME AIR DEFLECTOR (DYNA SWITCHBACK SHOWN)
mounting hardware. Windshield dimensions: Overall height – zippered pockets provide additional storage for maps or other
18.5"; width – 16.3". small items.
57100212
Fits ’06-’17 FXD, FXDB, FXDC and FXDL models equipped
with Engine Guard P/N 49010-06 or 49320-09. Does not fit
models with forward controls or footboards.
C. TALLBOY® SEAT
DYNA
SUPER REACH ® APE Stretch your legs in style. The Tallboy® one-piece seat moves
the rider back 1.75" and up 2.0" as compared to the Original
Equipment seat. The new position allows additional leg and
arm movement for the long-limbed rider and a comfortable
seating space for the open road. The Tallboy Seat also features
a wide pillion for added passenger comfort.
BADLANDER™
51471-06
Fits ’06-’17 Dyna models. FXD, FXDB and FXDLS models
require separate purchase of Seat Bumper Kit P/N 51653-06,
EXTREME Passenger Footpegs and Passenger Footpeg Mounting Kit
REACH ™ P/N 50210-06. Seat width 16.0"; passenger pillion width
12.0".
TALLBOY ®
DRAG
FORWARD CONTROLS
Tallboy Seats
DYNA
adjustable rider backrest that folds down for easier passenger need to get the bobber look. No cutting, welding or fabrica-
mounting. Rider backrest has a 5-position height adjustment tion is necessary.
with 1.5" range and a wide range of forward/back angle adjust- 52000277 Distressed Black Leather.
ment with a quick twist of the control knob. Fits ’04-’06 and ’10-later XL, ’06-’17 Dyna® and ’08-’17 FLS,
52000015 FLSS, FLSTC, FLSTN and FXS models. Installation requires
Fits ’06-’17 Dyna models. FXD, FXDB and FXDLS models separate purchase of model-specific Rigid or Spring Seat
require separate purchase of Seat Bumper Kit P/N 51653-06, Mounting Hardware Kit. Seat width 10.5".
Passenger Footpegs and Passenger Footpeg Mounting Kit
P/N 50210-06. Seat width 16.0"; passenger pillion width H. ROAD ZEPPELIN® SEAT PAD
12.0". Experience ultimate comfort. Designed to ensure hours of
B. SIGNATURE SERIES SEAT WITH RIDER BACKREST comfort in the saddle, Road Zeppelin® Seat Pads are equipped
C. BADLANDER SEAT (SHOWN WITH SMOOTH LOW PASSENGER BACKREST PAD) with a unique air bladder system that allows your weight to be
Clean smooth covers, subtle top-stitching and a frame- supported evenly across the entire seating surface. Shaped
hugging profile add up to a statement only Harley could create. to conform to most Harley-Davidson® seats, the pads feature
The low design delivers a reduced seat height that is ideal for adjustable mounting straps and a non-skid surface to keep
riders who want the shortest possible reach to the ground, them in place. The hand-washable seat pad can be deflated
and the long and lean shape allows tall riders to move back and rolled for compact storage.
from the hand and foot controls without sitting higher on the 52000327 Rider.
bike. Kit includes grab strap and all mounting hardware. Fits rider position on all models equipped with Original
52284-06 Equipment or accessory seats. Also fits passenger position
Fits ’06-’17 Dyna models. FXD, FXDB and FXDLS models on Touring models with large pillion area. Pad width – 14.0".
require separate purchase of Seat Bumper Kit P/N 51653-06, 52400162 Passenger.
Passenger Footpegs and Passenger Footpeg Mounting Kit Fits Original Equipment and accessory passenger pillions.
P/N 50210-06. Seat width 11.0"; passenger pillion width 5.0". Pad length – 12.0"; width – 9.0".
52284-96A
Fits ’96-’03 Dyna models. Seat width 11.0"; passenger pillion G. BOBBER SOLO SADDLE (SHOWN WITH SPRING SADDLE INSTALLATION KIT) I. CIRCULATOR SEAT PADS
width 5.0". Designed to keep the rider cool by reducing the perspiration
buildup between you and the seating surface, the Circulator
D. LOW-PROFILE LEATHER SEAT Pad can be installed and removed in seconds for easy clean-
Prowl the town in style. Featured as Original Equipment on the ing. The low-profile design minimizes seat-height change
’07 CVO™ Dyna® model, this low-profile seat features a breath- compared to inflatable pads, while enhancing comfort with its
able perforated leather insert. The firm padding makes you shock-absorbing construction. Elastic under-seat strap and
feel a part of the bike and the raised back stop keeps you in non-slip base provide secure installation and the available
place when you hit the gas. C. BADLANDER SEAT Circulator Passenger Pillion Pad attaches to the rider pad with
hook-and-loop tabs.
52378-07
Fits ’06-’17 Dyna® models. FXD, FXDB and FXDLS models 51074-10 Medium Seat Pad.
require separate purchase of Passenger Footpegs and Fits VRSC™, XG, XL and Dyna® models with Original
Passenger Footpeg Mounting Kit P/N 50210-06. Seat width Equipment and accessory seats. Pad width – 14.5"
12.0"; passenger pillion width 7.0". 51078-10 Passenger Pillion Pad.
Fits Original Equipment and accessory passenger pillions.
Pad width – 13.0"
52300103 Wide Backrest Pad.
Fits wide profile rider and passenger backrest pads up to
12.0" wide and 9.0" tall.
DYNA
52036-08
Fits ’06-’17 Dyna models equipped with Original Equipment
solo seat, Brawler® Solo Seat or Sundowner™ Solo Seat. Will
not fit with Original Equipment seat on FXDLS. FXWDG
models require removal of Original Equipment passenger
pillion.
Required Directional
H-D Detachables Accessory Available to fit: Docking Hardware Relocation Kit
No Saddlebags: Detachable Sideplates 52124-09A (Gloss Black), 53543-95B 2006-2008 FXDWG & 2008-2009 FXDF
53964-06B — —
(Chrome), 53834-00A (Wrinkle Black), 52866-06A (Chrome), 53870-01B (Chrome), and ‘09-’10 FXDFSE
Detachable Solo Rack 53511-06A, One-Piece Detachable Uprights 51161-10A (Gloss
Black), 52300042 (Chrome), One-Piece Detachable Uprights 52300044A (Chrome), 2006-later FXD, FXDC,FXDL and FXDSE,
53961-06 53968-06C
52300046A (Gloss Black) 2006-2008 FXDB
With P&A Saddlebags: Adjustable Sideplates 52300110 (Chrome), 52300090 2006-2008 FXDWG & 2008-2009 FXDF and
53964-06B — —
(Gloss Black), Detachable Sideplates 52124-09A (Gloss Black), 53543-95B (Chrome), FXDFSE/2
53834-00A (Wrinkle Black), 52866-06A (Chrome), Detachable Solo Rack 53511-06A,
One-Piece Detachable Uprights 51161-10A (Gloss Black), 52300042 (Chrome), One- 2006-later FXD, FXDC, FXDL and FXDSE,
53961-06 — —
Piece Detachable Uprights 52300044 (Chrome), 52300046A (Gloss Black) 2006-2008 FXDB
With P&A Saddlebags: 79300-06D, 88200-09A, 88348-10, 90181-08A, 90307-98, 2009-later FXDB 53797-09 68227-09
90369-02, 90369-06D, 90564-02, 90564-06D, 91617-03, 91615-09A, 90126-YYXXX
2010-later FXDWG 54097-10 53968-06C
2010-later FXDF 53964-06B — —
With Original Equipment Saddlebags: Detachable Sideplates 52300070A 2012-2016 FLD 52300065 — —
Notice: The prices appearing in this catalog are the manufacturer’s suggested retail prices. Actual pricing may vary.
DYNA
52631-07
B. LOW SISSY BAR UPRIGHT Fits One-Piece H-D® Detachables™ Sissy Bar Upright
Shaped to complement a thicker passenger pillion, this Low P/N 52729-08, 51853-07, 51849-07, 51146-10A, 51161-10A,
Sissy Bar Upright stands between the Standard and the Short 52300040A, 52300042A, 52300044A or 52300046A.
Bar Upright. The ideal match for touring style seats, this
upright also offers additional height options to riders with E. LOCKING H-D® DETACHABLES™ LATCH KIT
custom-style seats. This unique lock replaces the camlock on your Harley-
Davidson® Detachables™ accessories, providing additional
Fits ’04-later XL models with H-D® Detachables™ sideplates, security and peace of mind when parking your vehicle. The kit
’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG), includes two extended-reach barrel-style keys for easy access
’84-’05 Softail® (except FXSTD) and ’06-later FL Softail E. LOCKING H-D DETACHABLES LATCH KIT – CHROME to the lock. Key registration and replacement service is avail-
models (except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, able. Sold in pairs.
FLSTSE and FLSTSB and ’06 FLSTFSE) with appropriate
sideplates. Fits all models equipped with detachable Sideplates, Racks
52300022 Chrome. and Tour-Pak® Luggage Carriers (except ’18-later Softail®
models with HoldFast™ racks and uprights or ’09-later Touring
52300024 Gloss Black. models equipped with detachable Solo Tour-Pak Rack).
C. STANDARD SISSY BAR UPRIGHT 90300087 Chrome.
Give your passenger additional back support with a Standard 90300086 Black.
Sissy Bar Upright designed to accept a wide variety of back-
rest pads. F. H-D DETACHABLES LATCH KIT – CHROME
Decorative chrome latches are the perfect way to enhance
Fits ’04-later XL models with H-D Detachables sideplates, the appearance of your detachable accessories. Meticulously
’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG), polished and chrome-plated, these easy-to-install Rotary
’84-’05 Softail (except FXSTD) and ’06-later FL Softail models Latches are a direct replacement for the Original Equipment
(except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE satin black parts and are a simple way to add a finishing touch
and FLSTSB and ’06 FLSTFSE) with appropriate sideplates. B. LOW SISSY BAR UPRIGHT – CHROME B. LOW SISSY BAR UPRIGHT – GLOSS BLACK
to your ride. Latches feature an easy-to-pull finger release to
(52300022 SHOWN) (52300024 SHOWN)
52300018 Chrome. simplify access in hard-to-reach areas.
52300020 Gloss Black. 12600036
Fits all models equipped with detachable Sideplates, One-
Piece Sissy Bar Uprights, Racks, and Tour-Pak Luggage
Mounting Racks. (except ’18-later Softail models with
HoldFast racks and uprights).
E. LOCKING H-D DETACHABLES LATCH KIT – F. H-D DETACHABLES LATCH KIT – CHROME
BLACK G. REAR DOCKING HARDWARE COVER KIT
Disguise the rear docking hardware with these easy-to-install
covers. The caps slide over the exposed docking points and
are held in place by a strong magnetic pull. The caps are easy
to remove when you wish to reinstall detachable accessories.
Covers are available with brilliant chrome or durable gloss
black finish to match your bike’s attitude. Sold in pairs.
Fits many accessory docking hardware kits. Refer to the
fitment matrix in this P&A Catalog or the Parts & Accessories
section of www.harley-davidson.com for details.
48218-10 Short Chrome (pair).
48220-10 Large Chrome (pair).
48035-09 Small Chrome (pair).
48221-10 Short Black (pair).
48223-10 Large Black (pair).
48225-10 Small Black (pair).
C. STANDARD SISSY BAR UPRIGHT – CHROME C. STANDARD SISSY BAR UPRIGHT – G. REAR DOCKING HARDWARE COVER KIT – G. REAR DOCKING HARDWARE COVER KIT –
(52300018 SHOWN) GLOSS BLACK CHROME GLOSS BLACK
(52300020 SHOWN)
90 CRUISER 2 CRUISER 91
Backrests & Racks Backrests & Racks
PASSENGER BACKREST PADS E. AIR FOIL PREMIUM LUGGAGE RACK*
Choose from a wide variety of backrest pad sizes and shapes The low-profile aerodynamic styling defines the look of this
to match your comfort and style demands. Designed to Luggage Rack. Available in mirror chrome or rich gloss black
complement Original Equipment and accessory seats, these finish, the die-cast rear “Air Foil” grabs your attention and the
pads are engineered to fit specific sissy bar upright types. Bar & Shield insert adds a signature touch. The elegant round
1 tube rack features inlayed rubber runners for added grip
A. SLIP-OVER PASSENGER BACKREST PAD and dedicated bungee mounting points to simplify luggage
This Slip-Over Backrest Pad provides a touch of passenger tie-down. Kit includes all necessary mounting hardware. For
comfort, while maintaining the long, lean style of the Dyna® added visibility, the rack is designed to incorporate the inter-
Wide Glide® model. Held in place with hook-and-loop tabs, this nal wiring of the Air Foil Rack LED Light Kit P/N 68000076
rich black pad features grey stitching that complements the (red) or 68000077 (smoked) for a clean look.
Original Equipment seat and pillion.
Fits ’04-later XL models equipped with H-D® Detachables™
51732-10 Sideplates, ’06-’17 Dyna® models (except FXDF, FXDFSE and
Fits ’07-later XL models with Low-Profile Sissy Bar Upright ’10-’17 FXDWG) equipped with Detachable Sideplates, ’84-’05
P/N 52300403 and ’10-’17 FXDWG models with Original Softail® (except FLSTN and FXSTD) and ’06-’17 FLST, FLSTC,
Equipment sissy bar upright. FLSTNSE and FLSTSC and ’06 FLSTF models equipped with
Detachable Sideplates.
B. BACKREST PADS
54290-11 Chrome.
Sized to fit medallion and mini medallion-style sissy bar
uprights. Pad mounts with single center screw and bolt-on 54291-11 Gloss Black.
mounting strap. Includes chrome-plated mounting hardware.
F. LED LIGHT KIT**
Fits Low Medallion Style Sissy Bar Upright P/N 52754-04 This fast-acting LED Light Kit operates as a supplemental rear
or 51851-09, Low Square Bar Mini-Medallion Style Sissy Bar running light and brake light. The high, center-mount position
Upright P/N 53282-06, Standard Square Bar Mini Medallion A. SLIP-OVER PASSENGER BACKREST PAD B. BACKREST PADS E. AIR FOIL PREMIUM LUGGAGE RACK – CHROME places the light in the line-of-sight of following vehicles and
Style Sissy Bar Upright P/N 53281-06 or 53407-06, Standard the bright, fast-acting LED lamps get you noticed. Wiring is
Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98, concealed inside the rack tubes for a clean, custom installa-
52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style tion. Available with red or smoked lens.
Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage
Style Sissy Bar Upright P/N 52731-00 and Low Round Bar 2 Fits Air Foil Luggage Rack P/N 54290-11, 54291-11 and Air Wing
DYNA
Sissy Bar Upright P/N 52300022 or 52300024. Sissy Bar Upright P/N 52300146 and 52300147. Installation
requires separate purchase of model-specific Wiring Harness
1. 52652-04 Smooth.
1 Kit.
2. 52626-04 Smooth Top-Stitched.
68000076 Red Lens.
4
C. BACKREST PADS Also available:
Sized to fit medallion and mini medallion-style sissy bar
LED LIGHT KIT WIRING HARNESS
uprights. Pad mounts with single center screw and bolt-
Required for installation of LED Light Kit on Air Foil Luggage
on mounting strap. Kit includes chrome-plated mounting
Rack P/N 54290-11 or 54291-11.
hardware.
73415-11
Fits Low Medallion Style Sissy Bar Upright P/N 52655-84, Fits ’06-’17 Dyna (except FXDF, FXDFSE, ’14-’17 FXDL, ’16-’17
52909-02, 52754-04, 51851-09, Standard Medallion Style FXDLS and ’10-’17 FXDWG), ’84-’05 Softail® (except FXSTD
Sissy Bar Upright P/N 52735-85 or 52877-08, Standard
3
and FLSTN), ’06-’17 FLST, FLSTC and FLSTSC and ’06 FLSTF
Square Bar Mini Medallion Style Sissy Bar Upright P/N 53281- models with Air Foil Luggage LED Light Kit P/N 68000076 or
06 or 53407-06, Standard Heritage Style Sissy Bar Upright 5 68000077.
P/N 52731-00 and Standard Round Bar Sissy Bar Upright
P/N 52300018 or 52300020. G. FIVE BAR SPORT LUGGAGE RACK – CHROME*
1. 52612-95 Smooth Top-Stitched. This rack brings touring flexibility to your motorcycle. Can
2. 52412-79A Embossed Bar & Shield Logo. be used with H-D Detachables or Rigid Mount Sissy Bar
Sideplates.
3. 52348-97 Heritage Classic Bucket.
53862-00
4. 52347-97 Fat Boy® Bucket.
Fits ’04-later XL models (except XL1200CX) equipped with
5. 51132-98 Smooth Bucket. Detachable Sideplates, ’06-’17 Dyna models (except FXDF,
FXDFSE and ’10-’17 FXDWG) equipped with Detachable
D. BACKREST PADS Sideplates, ’84-’05 Softail (except FLSTN and FXSTD), ’06-
Sized to fit round bar sissy bar uprights, these pads mount to C. BACKREST PADS E. AIR FOIL PREMIUM LUGGAGE RACK – GLOSS BLACK ’17 FLST, FLSTC and FLSTSC and ‘06 FLSTF models equipped
mini medallion style uprights with two mounting holes. with Detachable Sideplates. Does not fit with Round Bar
Uprights P/N 52300018, 52300020, 52300022 and
Fits Standard Round Bar Mini-Medallion Style Upright
52300024.
P/N 52877-10 or 51168-10. Also fits Low Round Bar Mini
Medallion Style Sissy Bar Upright P/N 52300401, 52540-09A,
51477-06, 54256-10, 52300049 and 52300050.
1. 51641-06 Smooth Top-Stitched. 1
2. 51640-06 Smooth Bucket.
3. 51622-07 Fat Boy Lacing Bucket.
D. BACKREST PADS F. LED LIGHT KIT – RED LENS G. FIVE BAR SPORT LUGGAGE RACK –
CHROME
92 CRUISER CRUISER 93
Backrests & Racks Saddlebags
A. CUSTOM TAPERED SPORT LUGGAGE RACK* C. H-D® DETACHABLES™ LEATHER SADDLEBAGS
Smooth sweeping curves and the brilliant chrome or gloss These large capacity detachable saddlebags are completely
black finish define the look of this Sport Luggage Rack. removable with the simple pull of the internal handle, leaving
Designed to complement both round and square bar Sissy Bar your bike clean and ready to cruise the boulevard. The hand-
Uprights, this sleek rack adds a practical and stylish touch to some leather bags feature hidden quick-release clips behind
the motorcycle. the traditional strap and buckle. When removed, the large
capacity bags leave behind two simple, inconspicuous dock-
Fits ’04-later XL models (except XL1200CX) equipped with ing points. The bags are compatible with both rigid and H-D®
H-D® Detachables™ Sideplates, ’06-’17 Dyna® models (except Detachables™ accessories when installed with the appro-
FXDF, FXDFSE and ’10-’17 FXDWG) equipped with Detachable priate docking hardware kits. Luggage capacity: 2400 cubic
Sideplates, ’84-’05 Softail® (except FLSTN and FXSTD) and inches total.
’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC and ’06 FLSTF
models equipped with Detachable Sideplates. 90181-08A
Fits ’02-’17 Dyna® models (except FLD, ’02-’05 FXDWG, and
50300030 Chrome. ’09-’17 FXDB with optional strut covers). ’02-’05 models
50300031 Gloss Black. require separate purchase of Mounting Hardware Kit P/N
92025-09. ’10-’17 FXDWG models require separate purchase
Fits ’10-’17 FXDF and FXDWG and ’09-’10 FXDFSE models
of Turn Signal Relocation Kit P/N 68544-10. ’09-’17 FXDB
equipped with Rigid or H-D Detachables Sideplates and Sissy
models require separate purchase of Turn Signal Relocation
Bar Uprights.
Kit P/N 68227-09. ’13-’17 FXDB models equipped with side-
54055-10 Chrome. mount license plate requires License Plate Relocation Kit
54049-10 Gloss Black. P/N 67900130. ’16-’17 FXDLS models require separate
purchase of Turn Signal Relocation Kit P/N 68227-09 and
B. RIGID SOLO RACK – GLOSS BLACK* Side Mount License Plate Kit P/N 60938-10 or 60978-10. All
Versatile rigid-mount Solo Luggage Rack features a rich gloss other years and models (except FXDF and FXDWG) require
A. CUSTOM TAPERED SPORT LUGGAGE RACK – CHROME
black finish that complements almost any paint color. Equip separate purchase of Turn Signal Relocation Kit P/N 68732-
the contoured rack with a duffle bag for a cross-country solo 02A (Domestic), 68733-02A (International) or Layback
ride or attach the available H-D® Detachables™ Passenger License Plate Kit P/N 60215-06. Not for use with Rear Axle
Pillion P/N 52689-09 for a comfortable two-up tour. Covers on FXDF and FXDWG models.
52796-09 Also available:
DYNA
Fits ’06-’17 Dyna models with solo seats (except FLD, FXDF,
FXDFSE, FXDL and ’10-later FXDWG). TURN SIGNAL RELOCATION KIT
Required for installation of saddlebags and detachable acces-
sories on ’09-later FXDB models.
68227-09
Fits ’09-’17 FXDB models (except models with optional
fender strut covers).
DYNA
capacity all in one. Constructed around a rigid plastic tub for sion and rebound damping control when compared to typical
long-term durability, the leather bag features a stylish design twin-tube shock absorbers. The nitrogen gas charged shocks
with lines that enhance the smooth Dyna model profile. The resist oil aeration and work with the internal valve stack to
leather saddlebags provide custom looks and tons of storage provide superior damping control in the twisties. The large
space for the road. Hidden quick-release closures add pack- 36mm pistons and low viscosity high-performance oil allow
ing convenience. Luggage capacity: 2380 cubic inches total. these shocks to react quickly to impacts and keep the tires
90369-06D tracking the road surface. You get a controlled ride and mini-
Fits ’02-’17 Dyna models (except FLD, ’02-’05 FXDWG and mized bottoming harshness transmitted through the frame.
’09-’17 FXDB with optional strut covers). ’02-’05 models The locking threaded adjustment lets you fine-tune the spring
require separate purchase of Mounting Hardware Kit preload to your current riding conditions – whether a solo
P/N 92025-09. ’09-’17 FXDB models require separate run on the back roads or a fully loaded two-up freeway tour
D. PREMIUM RIDE SINGLE CARTRIDGE FORK KIT – and urethane bumpers provide a softer feel if the shock
purchase of Turn Signal Relocation Kit P/N 68227-09. ’10-’17
FXDWG models require separate purchase of Turn Signal bottoms under load. The beautifully finished shocks feature
Relocation Kit P/N 68544-10. ’13-’17 FXDB models equipped black-anodized billet top caps and black progressively-wound
with side-mount license plate requires License Plate springs. Kit includes left and right shock and preload adjust-
Relocation Kit P/N 67900130. ’16-’17 FXDLS models require ment spanner wrench.
separate purchase of Turn Signal Relocation Kit P/N P/N 54000066 Stock Height.
68227-09 and Side Mount License Plate Kit P/N 60938-10 or Fits ’06-’17 Dyna models (except FLD and ’07-’08 FXDSE).
60978-10. All other years and models (except FXDF and Original Equipment on FXDLS models.
FXDWG) require separate purchase of Turn Signal Relocation
Kit P/N 68732-02A (Domestic), 68733-02A (International) or
Layback License Plate Kit P/N 60215-06. Not for use with
Rear Axle Covers on FXDF and FXDWG models.
DYNA
Billet Style Shift Levers are forged from 6061-T6 aluminum, the custom look of smooth chrome. The kit includes left- and
then machined and finished in chrome, satin black or edge cut right-hand traditional D-shaped footboard pans, chrome-
styles for a beautiful, custom look. Includes chrome hardware. plated and ready to install with your Original Equipment
hardware. Footboard inserts and footboard supports sold
Fits ’91-’17 Dyna® (except ’14-’17 FXDL, FXDLS or separately.
models equipped with Further Forward Mid-Control Kit
50752-04 Traditional Style.
P/N 50500386) and ’90-’17 FX Softail® models.
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
34539-00 Chrome. FXFBS) and ’86-later Touring and Trike models equipped
34043-10 Edge Cut. with passenger footboard supports.
34016-08 Satin Black.
C. BILLET STYLE SHIFT LEVER – C. BILLET STYLE SHIFT LEVER – H. PASSENGER FOOTBOARD PAN KIT – H. PASSENGER FOOTBOARD PAN KIT – J. HALF-MOON PASSENGER FOOTBOARD
D. RIDER FOOTBOARD KIT CHROME EDGE CUT GLOSS BLACK, CLASSIC STYLE GLOSS BLACK, CONTEMPORARY STYLE PANS AND INSERTS
Convert your Dyna® model to touring-oriented footboard- Styled to match the Half-Moon Rider Footboards, these clas-
sic passenger footboards add both style and comfort to your
WORDING SEEMS INCORRECT
based controls. Ideal for riders with an inseam too long for mid
controls or for riders who prefer the extra foot room on long nostalgic ride. Available in mirror-finish chrome or gloss black
BASED ON THE MARK-UP
rides, this complete kit moves the foot brake and shift lever finish, the kit includes left and right footboard pan and vibra-
forward from the standard position. The installation places the tion-isolation footboard inserts. Model-specific footboard
rider into a comfortable upright posture with a flat foot and mounts are sold separately.
bent knee profile. The kit includes left and right footboards
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
with inserts, footboard supports, brake lever, brake and shift
FXFBS) and ’86-later Touring models equipped with passen-
linkage, brake pedal pad and all required hardware. Installation
ger footboard supports. Does not fit Trike models.
reuses Original Equipment shift lever. Customize the look by
adding your choice of accessory traditional D-shaped rider 50807-08 Chrome.
footboard inserts and large brake pedal pads. 50810-08 Gloss Black.
50500247
Fits ’06-’17 FXD, FXDB and FXDC, ’06-’13 FXDL and ’06-’08 K. SWEPT WING PASSENGER FOOTBOARD PANS
FXDWG models. Stock on ’12-’16 FLD models. Fits ’17 FXDBP These unique Swept Wing Passenger Footboard pans comple-
and FXDBC. Does not fit with frame-mounted highway pegs. ment the Swept Wing Rider Footboard shape and allow you
to replace the Original Equipment passenger footpegs on
E. RIDER FOOTBOARD HEEL GUARD certain models with footboards. When folded, the footboard
Avoid damaged boots and hours of cleaning melted rubber displays a mirror chrome surface in your choice of smooth or
scuff marks from your exhaust shield. This Heel Guard mounts “ball-milled” grooved design. Footboard inserts and footboard
to the right-side rider footboard and The subtle curved shape supports sold separately.
keeps the boot heel away without restricting fore-and-aft Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
C. BILLET STYLE SHIFT LEVER – D. RIDER FOOTBOARD KIT I. PASSENGER FOOTBOARD PANS – CHROME J. HALF-MOON PASSENGER FOOTBOARD
movement of the rider’s foot. Kit includes chrome guard with FXFBS) and ’86-later Touring models equipped with passen-
SATIN BLACK PANS – GLOSS BLACK SHOWN
cutaway Bar & Shield logo and all mounting hardware. ger footboard supports. Does not fit Trike models.
50500225 50357-04 Chrome – Grooved.
Fits ’12-’16 FLD, ’86-’17 FL Softail , ’86-later Touring and ’09-
later Trike models equipped with Traditional and Swept Wing 50716-04 Chrome – Smooth.
footboards. Does not fit models equipped with Half-Moon,
Tapered, Airflow, Defiance, Dominion™ or Burst footboards,
Extended Reach Rider Footboards P/N 50409-04 or 54145-
10, Rider Running Boards P/N 50500158 or Screamin’ Eagle®
Fat Exhaust Shields.
E. RIDER FOOTBOARD HEEL GUARD F. HIGHWAY PEG MOUNTING KIT K. SWEPT WING PASSENGER FOOTBOARD K. SWEPT WING PASSENGER FOOTBOARD
PANS – CHROME GROOVED PANS – CHROME SMOOTH
98 CRUISER CRUISER 99
Foot Controls Engine Guards
A. PASSENGER FOOTPEG SUPPORT KIT – E. ENGINE GUARD KIT*
WRINKLE BLACK Protect your bike without sacrificing ground clearance or style.
Add footpegs to your solo seat-equipped Dyna® motorcy- The one-piece Engine Guard is designed to complement the
cle. Kit includes left and right footpeg supports and mount- lines of the motorcycle and the available chrome or gloss
ing hardware. Footpegs and footpeg hardware sold separately. black finish adds the perfect finishing touch.
Fits ’06-’17 Dyna models. For use with the mid or forward controls. Fits ’06-’17 Dyna®
50210-06 Wrinkle Black. models. ’14-’17 FXDL, FXDLS (all markets) and ’15-’17 Dyna
(India models only) require separate purchase of Horn
B. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT Relocation Bracket P/N 69000058. Fits with Oil Cooler Kit
Maximize your passenger’s riding comfort. Proper foot posi- P/N 26151-07B. ’07-’08 FXDSE and ’09-’10 FXDFSE requires
tion reduces the cramped or stretched-out feeling and relieves removal of front chin spoiler and separate purchase of
pressure on the knees and the tailbone. These Adjustable Regulator Caddy P/N 70464-08A. ’06-’11 models equipped
Mounts raise and lower the passenger footpeg to accom- with evap canister also require separate purchase of Canister
modate taller and shorter passengers. Easy to adjust with Bracket P/N 47207-06. ’12-’17 models equipped with evap
common tools, the mount adjusts through a 360° range canister require separate purchase of Canister Relocation Kit
(depending on model), allowing both fore and aft and up and A. PASSENGER FOOTPEG SUPPORT KIT – A. PASSENGER FOOTPEG SUPPORT KIT – P/N 60800005.
down height adjustment. Kit includes left and right adjust- WRINKLE BLACK WRINKLE BLACK 49010-06 Chrome.
able support assembly and all required mounting hardware. 49320-09 Gloss Black.
Footpegs sold separately.
50763-09 Also available:
Fits models with H-D® male-mount style passenger footpeg EVAPORATIVE CANISTER RELOCATION KIT
supports (except Softail® models). Does not fit with Heel 60800005
Raiser Footpeg Kit P/N 50178-09. Does not fit the rider Required when mounting Engine Guard P/N 49320-09 or
E. ENGINE GUARD KIT – CHROME E. ENGINE GUARD KIT – GLOSS BLACK
position. 49010-06 on ’12-’17 Dyna models designated for California
and Asia-Pacific markets.
C. JIFFY STAND EXTENSION KIT
Jiffy Stand Extension Kits have been ergonomically designed F. MUSTACHE ENGINE GUARD*
to simplify the deployment and retraction of the jiffy stand. Combine classic shape and modern function for a unique twist
DYNA
The extension is shaped to simplify locating the tab with your on engine protection. The flow of this engine guard comple-
boot and aid in swinging the jiffy stand into position. The move ments the bike’s traditional style while the gracefully curved
feels natural and adds confidence when parking your motorcy- upper section incorporates highway pegs into the shape. The
cle in a tight spot. Kit mounts to Original Equipment jiffy stand integrated rubber pads offer a comfortable and slip-resistant
and includes all required mounting hardware. cushion for your feet while traveling the open road. One-piece
50000032 engine guard kit includes all required mounting hardware.
Fits ’93-’17 Dyna models (except FXDFSE, FXDS-CONV,
Fits ’06-’17 Dyna models. ’14-’17 FXDL, FXDLS (all markets)
FXDSE, FXDWG2, FXDWG3, FXDX, FXDXT, ’99-’00 FXR and
and ’15-later Dyna (India models only) require separate
’01-’04 FXDL).
purchase of Horn Relocation Bracket P/N 69000058. Fits
with Oil Cooler Kit P/N 26151-07B. ’07-’08 FXDSE and ’09-’10
D. MINI FOOTBOARD KIT* B. ADJUSTABLE PASSENGER FOOTPEG C. JIFFY STAND EXTENSION KIT FXDFSE requires removal of front chin spoiler and separate
This Footboard Kit can be installed in place of traditional MOUNT KIT purchase of Regulator Caddy P/N 70464-08A. ’06-’11 models
footpegs and provides a little additional leg support and equipped with evap canister also require separate purchase
more options to move your legs around on a long ride. Mini of Canister Bracket P/N 47207-06. ’12-’17 models equipped
Footboards mount to the standard H-D® style footpeg with evap canister require separate purchase of Canister
supports and can be used in many rider, passenger and high- Relocation Kit P/N 60800005.
way peg applications. Sole-gripping rubber complements
Original Equipment or accessory footboards and footpegs and 49000077 Chrome.
adds vibration isolation and a rich appearance. 49000078 Gloss Black.
Fits rider position: Also available: (not shown)
’02-’17 VRSC™ models with forward controls (except
HORN BRACKET ADAPTER
VRSCDX and VRSCF), ’15-’20 XG models (except XG750A),
Required when mounting Engine Guard P/N 49010-06,
’06-earlier XL, ’07-’10 XL883, XL883C, XL883R, XL1200C,
49320-09, 49000077, or 49000078 on ’14-later FXDL (all
XL1200R and ’07-’11 XL1200L, ’91-’17 Dyna® models (except
markets) and ’15-later Dyna (India models only).
FLD) and ’84-’17 Softail® models with forward controls
(except FXCW, FXCWC, FXS, FXSB or FXSBSE). 69000058
Fits passenger position:
F. MUSTACHE ENGINE GUARD – CHROME F. MUSTACHE ENGINE GUARD – GLOSS BLACK Fits ’14-’17 FXDL and FXDLS (all markets) and ’15-’17 Dyna
All models with H-D male-mount passenger peg mounts (India models only) equipped with Engine Guard P/N 49010-
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna and 06, 49320-09, 49000077 or 49000078.
Softail models equipped with Shotgun exhaust). ’84-’17
Softail models require separate purchase of Support Kit G. SWITCHBACK™ REAR SADDLEBAG GUARDS –
P/N 50454-09. Does not fit passenger position on ’18-later CHROME*
Softail models. Add protection and style to your ride. These chrome guards
add a traditional Bagger look to the Dyna Switchback™ model
Fits highway peg position: D. MINI FOOTBOARD KIT – D. MINI FOOTBOARD KIT – and protect the leading edge of the saddlebags. The innovative
All models with frame-mount or engine guard-mount (LARGE CHROME SHOWN) (LARGE BLACK SHOWN) design allows the guards to be removed with the detachable
highway pegs (except Whiskers Adjustable Highway Bar saddlebags for a stripped-down look and the integrated stand
P/N 50855-09 and 50865-09). keeps the bags upright and off the ground when off the bike.
50500139 Small 3.0" – Chrome. Kit includes left and right guards and all necessary mounting
50500144 Small 3.0" – Gloss Black. hardware.
50500109 Large 4.0" – Chrome. 90201044
50500124 Large 4.0" – Gloss Black. Fits ’12-’16 FLD models.
3" Chrome
4" Chrome *WARNING: Do not use highway pegs under normal
stop and go operating conditions. Doing so could result
in death or serious injury.
DYNA
71282-04 covers and all required mounting hardware.
Fits ’06 FXD35, ’07-’11 FXDC, ’08-’10 FXDF and ’04-’08
FXDWG models. Fits ’04-’16 XL and ’06-’17 Dyna® models (except FLD, FXDF,
FXDL and FXDLS). Does not fit with H-D® Detachables™
D. PREMIUM TANK PANEL WITH POUCH Leather Saddlebag Kit P/N 90181-08A.
This leather tank panel features an over-sized pouch for conve- 54000016 Chrome.
nient at-your-fingertips storage. The heavy-duty leather pouch 54000017 Gloss Black.
will maintain its shape for miles to come while the bold chrome
Bar & Shield medallion sits proudly on the flap for all to admire. J. MAGNUM 5 SPROCKET COVER
91135-09 Styled to match the distinctive Magnum 5 Custom Wheel.
Fits ’93-’08 FXDWG, ’06 FXD35, ’07-’17 FXDC and FXDF and
B. SCREAMIN’ EAGLE FORK BRACE C. DASH PANEL EXTENSION – CHROME H. REAR FENDER SUPPORT COVER KIT – GLOSS BLACK Available in mirror chrome or gloss black, this Sprocket Cover
’00-’17 Softail models (except FLS, FLSS, FLSTNSE, FLSTSB, gives the appearance of having a custom sprocket at a frac-
FLSTSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD, tion of the cost. Cover is easy to install with Original Equipment
FXSTSSE, ’09-’17 FLSTC and ’06 FLSTFSE). ’93-’03 FXDWG hardware or add the Chrome Hardware Kit P/N 94773-07
models require the separate purchase of Clip P/N 10102 and (sold separately) for a finished look.
O-Ring P/N 11174.
Fits ’07-’17 Dyna models (except FLD).
E. FRONT FENDER EXTENSION – CHROME 40120-09 Chrome.
Dress your front fender in chrome. This chrome-plated
tapered Fender Extension is shaped to follow the curve of the K. HARLEY-DAVIDSON SCRIPT REAR AXLE COVERS
fender for style and function. Using the Original Equipment Chrome-plated die-cast cover conceals the side of the
fender hole, the extension mounts below the trailing edge of swingarm and the axle. Unique styling features a black-filled
the fender to help control road dirt and spray. embossed Harley-Davidson script for a distinctive contrast.
59664-03 The kit is easy to install without removing the rear wheel. Kit
Fits ’91-’08 Dyna and ’84-’07 FX Softail models. Will not fit includes all necessary mounting hardware.
FXD, FXDX or FXDXT models equipped with Voltage Regulator 44346-06
Covers. Fits ’06-’17 Dyna models. Will not fit models equipped with
saddlebags.
F. BAR & SHIELD LOGO FRONT FENDER SPEAR
This chrome-plated trim spear adds a sweeping dash of
chrome to the front fender. Featuring a raised Bar & Shield
logo set against a textured black field, this self-adhesive
medallion is easy to install.
91194-04 Small. D. PREMIUM TANK PANEL WITH POUCH I. SHOCK BOLT COVERS – CHROME I. SHOCK BOLT COVERS – GLOSS BLACK
Fits XL, XR, Dyna (except FLD), FX Softail (except FXFB) and
’18-’21 FLSL models.
E. FRONT FENDER EXTENSION – CHROME F. BAR & SHIELD LOGO FRONT FENDER SPEAR J. MAGNUM 5 SPROCKET COVER – K. HARLEY-DAVIDSON SCRIPT REAR AXLE
CHROME COVERS
102 CRUISER CRUISER 103
Chassis Trim Chassis Trim
A. BATTERY & ELECTRICAL PANEL COVER KIT – G. BATTERY SIDE COVER – CHROME*
CHROME This chrome-plated cover is designed for use with the new
Dress your bike with a new chrome skin. This two-piece kit Harley-Davidson® AGM sealed maintenance-free batter-
replaces the painted battery and electrical panel covers and ies and can be used in combination with Battery Top Cover
adds a bright contrast to the motorcycle’s profile. Add your P/N 66367-97 or 66368-97.
choice of accessory Battery Cover Band Trim (sold separately) 66718-01
for a finishing touch. Fits ’97-’03 XL and ’97-’05 Dyna® models.
61300186
Fits ’12-’17 Dyna® models. H. BATTERY COVERS – CHROME*
Chrome-plated battery enclosures include slotted open-
B. BATTERY COVER – CHROME ings for convenient visual check of battery fluid levels. Easy
Dress your battery with a new chrome skin. This one-piece installation.
Chrome Battery Cover replaces the painted box and adds a 66375-97
bright contrast to the Original Equipment satin aluminum trim Fits ’97-’05, ’97-’05 FXD, ’99-’05 FXDX and ’01-’03 FXDXT
band. models. Stock on FXDL, FXDWG and FXDS-CONV. models.
66375-06 A. BATTERY & ELECTRICAL PANEL COVER KIT – CHROME G. BATTERY SIDE COVER – CHROME H. BATTERY COVERS – CHROME
Fits ’06-’17 Dyna models (except FXDL). ’14-’17 Dyna models I. COIL COVER – CHROME
require purchase of a battery cover trim band. This sleek, Chrome Coil Cover features an innovative design
that conceals all the mounting hardware. It offers a great, easy
C. BATTERY COVER BAND – CHROME way to customize a very visible part of your Dyna motorcycles.
This sweeping chrome band replaces the Original Equipment 31709-04
satin-finish band for a mirror-polished look. The easy-to-install Fits ’04-’17 fuel-injected Dyna models.
ribbed chrome band is a high-contrast addition to a painted
battery cover or the perfect finishing touch to the Chrome J. BAR & SHIELD LOGO COIL COVER
Battery Cover P/N 66375-06. Featuring a radical open-face design with a Bar & Shield silhou-
66439-07 ette, this Chrome Coil Cover matches the Chrome Voltage
Fits ’06-’17 Dyna models (except FLD, FXDL, ’13-’17 FXDB Regulator Cover for an integrated custom look. Includes all
and ’14-’17 FXDF). Also fits models equipped with Battery mounting hardware.
and Electrical Panel Cover Kit P/N 61300186.
DYNA
74616-04
Fits ’04-’17 EFI Dyna and ’01-’17 EFI equipped Softail®
D. BATTERY COVER BAND – HARLEY-DAVIDSON SCRIPT models (except FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE
Replace the Original Equipment satin aluminum trim and FXST-Aus).
band with a splash of chrome. This easy-to-install custom
contoured trim band features a black-filled embossed Harley- K. VOLTAGE REGULATOR COVER
Davidson script design and offers a stunning contrast to the Designed for up-front style, the open face and floating Bar
factory painted battery cover or a great finishing touch for the & Shield logo on this chrome cover provide good looks with-
Chrome Battery Cover P/N 66375-06 or 61300186. out compromising air flow across the voltage regulator. Kit
66443-06 includes chrome-plated mounting hardware.
Fits ’06-’17 Dyna models (except FLD, FXDL, ’13-’17 FXDB 74667-06 Fits ’06-’11 Dyna models.
B. BATTERY COVER – CHROME C. BATTERY COVER BAND – CHROME I. COIL COVER – CHROME I. COIL COVER – CHROME
and ’14-’17 FXDF). Also fits models equipped with Battery
and Electrical Panel Cover Kit P/N 61300186. L. PREMIUM OIL COOLER KITS
This oil cooler was designed specifically for Harley-Davidson
E. ELECTRICAL PANEL TRIM – CHROME to out-perform all other coolers in the industry. The cooler
This sweeping chrome spear adds a mirror-polished accent to features a unique Turbulator system that evenly distributes
your bike’s profile. The easy-to-install band is a high-contrast oil across the cooling chambers. The air fins are designed to
addition to the Original Equipment painted electrical panel efficiently dissipate heat. The oil cooler has been designed
cover or the perfect finishing touch on a Chrome Cover. to simplify installation and enhance performance. The large
66462-07 heat exchanger provides excellent cooling efficiency. The kit
Fits ’04-’17 Dyna models (except ’06 FXD35, ’04-’13 FXDL, features a one-piece adapter plate with integrated thermo-
’17-later FXDLS and ’04-’08 FXDWG models with Original stat that allows oil lines to connect to the oil filter bracket.
Equipment electrical panel cover). Thermostat activates at 185°F (85°C). Kit comes complete
with mounting hardware and precut oil lines.
F. ELECTRICAL PANEL COVER WITH TRIM – CHROME 26151-07B Horizontal Mount.
Chrome-plated Electrical Panel Cover with concealed mount- Fits ’06-’17 Dyna models (except FLD, FXDSE, FXDFSE,
ing hardware provides a nice clean look. Kit includes panel FXDLS and California models). Does not fit with Front Spoiler
cover, distinctive chrome-plated die-cast trim with black Kits or DEFINITIVE5™ Filtration System Kits. Fits with all
accented lines and Bar & Shield logo and all necessary mount- H-D® Engine Guards. Includes chrome oil cooler cover.
ing hardware.
62700017A Side Mount.
66426-04 Fits ’04-’11 Dyna models. Fits ’07-’17 Dyna models (except FXDLS). Fits with all H-D®
Engine Guards. Includes gloss black Oil Cooler Cover.
D. BATTERY COVER BAND – E. ELECTRICAL PANEL TRIM – CHROME J. BAR & SHIELD LOGO COIL COVER K. VOLTAGE REGULATOR COVER
HARLEY-DAVIDSON SCRIPT
SOFTAIL
1). FXLR models with Tall Risers/Moto Bars require separate
purchase of Turn Signal Brackets P/Ns 12700164 and SUPER SP ORT COMPACT KING SI Z E
67800630 and Hardware P/N 67015-02 (qty 2).
Eliminates wind and debris, but keeps the wind-in- Traditional king-sized shape with a minimalist edge. Nothing gets past this one. The King Size
57001250
Fits ’20-later FXLRS models. Does not fit FXLRS models with the-hair feeling. Ideal for a cool morning For Harley-Davidson® custom and cruiser models, windshield is the ultimate in on-road
Tall Risers and Moto Bars. Also compatible with 5.75" ride to the office, the sleek profile hugs the front the Compact windshield provides wind and weather protection. Available in a variety of shield heights,
Headlight Bucket P/N 67700380, Trim Ring, Screw and Lock lamps for a sporty look. protection for every day riding. the road can’t lay a finger on you.
Nut P/N 67700375, 3383 and 7606.
SCRATCH-RESISTANT
HARD-COATED
POLYCARBONATE SHIELD
57001250
STAINLESS STEEL
BRACKETS & BRACES
NO TOOLS
QUICK-RELEASE MOUNT
SOFTAIL
57301-06 19" Light Smoke.
on-and-off convenience and a clean, custom look. No tools
Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-’20
are required.
FXBR and FXBRS models. Windshield dimensions: Overall
height – 25.0"; width – 20.1". Fits ’19-’20 FXDRS models. Windshield dimensions: Overall
height – 16"; width – 15".
57400361 16" Light Smoke.
Fits ’06-’17 Dyna® (except FLD, FXDWG, FXDF and FXDSE) and
’18-later FXBB, FXBBS, FXLR and FXST models. FXDLS models
require the removal of Original Equipment Wind Deflector.
58346-06 18" Clear – Polished.
Windshield dimensions: Overall height – 26.8"; width – 19.7".
58348-06 14" Light Smoke – Polished.
Windshield dimensions: Overall height – 22.8"; width – 19.5".
Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-’20
FXBR and FXBRS models.
58387-06 18" Clear – Polished.
Windshield dimensions: Overall height – 26.8"; width – 19.5".
58444-06 14" Light Smoke – Polished.
Windshield dimensions: Overall height – 22.8"; width – 19.5".
SOFTAIL
Fits ’22-Later FXLRST models. completely or reinstalled in seconds to match your riding
mood. Kit includes mounting hardware.
C. ST WIND DEFLECTOR 57400329 21" Clear – Polished.
Maintain a low profile. This 2” tall wind deflector is designed Fits ’18-later FLDE, FLHC and FLHCS models. Windshield
specifically for riders of the Low Rider® ST model who prefer dimensions: Overall height – 27.0"; width – 21.5".
to ride with maximum style and minimal wind protection. The
gold coating gives it dazzling style. An opaque gold finish F. SPORT GLIDE® WINDSHIELD
complements wheels and accents of the Low Rider® ST model. Style meets function. This 5.5" tall Windshield stands 4" taller
Shaped to complement the shape of the Low Rider® ST fair- than the Original Equipment Sport Glide wind deflector to offer
ing. Durable surface is protected by a scratch-resistant layer. sport styling with a little greater wind protection. The taller
Factory designed for an ideal fit and durability while providing shield moves more air up and over the rider to reduce helmet
a low, lean look for your custom ride. buffeting and wind-related fatigue. Harley-Davidson® wind-
57400503 shields are formed of hard-coated polycarbonate for strength
Fits ’22-Later FXLRST models. and scratch resistance and the light smoke tint complements
B. LIGHT SMOKE WINDSHIELD – 10" E. KING-SIZE NOSTALGIC H-D DETACHABLES WINDSHIELD any paint color.
(DELUXE MODEL SHOWN) 57400360 5.5" Light Smoke.
Fits ’18-’21 FLSB models.
Also available:
TRANSPARENT PAINT GUARD KIT – SPORT GLIDE
This transparent skin is designed to protect your paint from
bugs, boot scuffs and road debris. The crystal-clear material
protects the paint without changing the overall look of your
bike. And the optical properties of the material disguise minor
scuffs and scratches. The application process is similar to
that of tinted window film and the material can be removed
and replaced when it is no longer cosmetically appealing.
Scratches to paint can be expensive to repair but scratches to
this film can be removed by applying a small amount of heat
with a heat gun.
Fits ’18-’21 FLSB models. Not recommended for use on denim
or aftermarket paint.
11100225 Fairing.
11100222 Saddlebags.
SOFTAIL
lower back comfort.
REACH ™
TOURING 52000400
Fits ’18-later FXBB, ’20-later FXST and ’21-later FXBBS
models. Seat width 12.5"; passenger pillion width 7.0".
MID CONTROLS
LOW HEIGHT
3D Mesh Technology
SEE PAGES 131-137 SEE PAGE 130 C. BEVEL PASSENGER PILLION C. BEVEL PASSENGER PILLION
(52400197 SHOWN) (52400196 SHOWN)
112 CRUISER CRUISER 113
Seating – Reach® Seating – Reach®
REACH® SOLO SEATS E. REACH® SOLO SEAT – FXDR 114 STYLING
From the custom metal Harley-Davidson® medallion to the This Reach® Solo Seat puts you closer to the controls with-
sleek fast-back design, this seat is shaped to deliver the out sacrificing the FXDR™ 114 model’s head-turning style.
ergonomic position that a shorter rider needs. Sculpted and Designed to position riders with a shorter inseam closer to
molded to ease the reach to the ground, this Reach® Solo the ground, Reach Seats are shaped to place the rider in a
seat positions the rider closer to the controls when compared comfortable and confident relationship to the hand and foot
to the stock seat. The narrow nose and the seating position controls. Compared to the stock seat, the Reach seat moves
provides the rider with added confidence and control while the rider approximately 1.5" forward bringing the legs closer
the bike is at a stop or during parking maneuvers, while the together for an easier reach to the controls and the ground.
generous seating width adds support for the long haul. And Reach Seats feature a stepped profile that provides back
the seat’s upturned tail keeps you in place without confining support and keeps the rider from sliding back during accel-
you to one position. For maximum comfort and support, these eration. This Reach Solo Seat is styled to match the FXDR 114
seats are recommended for riders between 5’-2" and 5’-8" tall. model’s Original Equipment seat.
Measurements as compared to other seating options:
A. REACH SOLO SEAT – DELUXE STYLING
Styled to complement the classic looks of the Softail® Deluxe - Stock FXDRS model seat – 1.5" forward.
model, this Reach Solo Seat features double-row stitch- A. REACH SOLO SEAT – DELUXE STYLING E. REACH SEAT – FXDR 114 STYLING 52000398
ing down the center of the seating surface, and premium Fits ’19-’20 FXDRS models. Seat width 11.5".
leather valance side panels with decorative inserts. Matching
Passenger Pillion P/N 52400175 is available. F. REACH SOLO SEAT – FAT BOY STYLING
This Reach Solo Seat puts you closer to the controls without
Measurements as compared to other seating options: sacrificing the Fat Boy® model’s head-turning style. The seat
- Stock ’18 Deluxe model seat – 1.5" forward features stitching and seat textures are a perfect match for
- Stock ’18 Heritage model seat – 1.5" forward the Original Equipment passenger pillion.
52000302
Measurements as compared to other seating options:
Fits ’18-later FLDE, FLHC and FLHCS models. Does not fit
with FLHC or FLHCS Original Equipment passenger pillion. - Stock ’18 Fat Boy model seat – 1.0" forward.
Seat width 14.5". 52000352
Fits ’18-later FLFB and FLFBS models equipped with
B. REACH SOLO SEAT – SOFTAIL SLIM STYLING Original Equipment passenger pillion or Sundowner Pillion
This minimalistic Reach Solo Seat features a classic tuck & P/N 52400170. Seat width 14.0".
roll design that perfectly complements the bobber style of
the Softail Slim® models. Matching Passenger Pillion P/N
52400129 is available. REACH TWO-UP SEATS
Designed to position riders with a shorter inseam closer to the
Measurements as compared to other seating options: ground, Reach Two-Up Seats are shaped to place the rider in
- Stock ’18 Softail Slim model seat – 1.25" forward. a comfortable and confident relationship to the hand and foot
52000303 controls. The wide seating surface provides loads of support
Fits ’18-’21 FLSL models. Seat width 11.5". and the narrow tapered nose brings the rider’s legs together
for an easier reach to the ground at a stop. These Reach
B. REACH SOLO SEAT – SOFTAIL SLIM STYLING F. REACH SOLO SEAT – FAT BOY STYLING
C. REACH SOLO SEAT – ’18 BREAKOUT STYLING Two-Up Seats feature a stepped profile that keeps the rider
(SHOWN WITH ORIGINAL EQUIPMENT PILLION)
SOFTAIL
This comfortable Reach Solo Seat is styled to match the from sliding rearward during acceleration, and a generous
Softail Breakout® model’s Original Equipment seat and raised passenger position that cradles the tailbone for hours
features rich red stitching, a textured vinyl inlay and Harley- of riding comfort. The rich vinyl seating surface is accented
Davidson medallion insert. The seating surface and stitching with a classic Harley-Davidson® medallion.
complements the model year ’18 Original Equipment passen-
ger pillion. G. REACH TWO-UP SEAT – SPORT GLIDE STYLING
Designed to look like a separate solo seat and pillion, this
Measurements as compared to other seating options: smooth vinyl one-piece Reach Two-Up Seat perfectly comple-
- Stock ’18 Breakout model seat – 1.5" forward. ments the sweeping lines of the Low Rider® model.
52000304 Red Stitching.
Measurements as compared to other seating options:
Fits ’18-’20 FXBR and FXBRS models equipped with Original
Equipment passenger pillion or Sundowner Pillion P/N Stock ’18 Low Rider model seat – 0.5" lower, 1.5" forward.
52400225 or 52400169. Seat width 13.0". 52000354
Fits ’18-later FLSB, FXLR, FXLRS and FXLRST models. Seat
D. REACH SOLO SEAT – ’19-’20 BREAKOUT STYLING width 12.0"; passenger pillion width 5.5".
This comfortable Reach Solo Seat is styled to match the Softail
Breakout model’s Original Equipment seat and features grey H. REACH TWO-UP SEAT – FAT BOB STYLING
stitching, a textured vinyl inlay and Harley-Davidson medal- Designed to reflect the technical style of the Original
lion insert. The seating surface and stitching complements the Equipment Fat Bob® seat, this Reach Two-Up seat features
model year ’19 Original Equipment passenger pillion. textured suede-like seating surfaces for grip, and raised center
panels for a tough, tactical look.
Measurements as compared to other seating options:
- Stock ’19 Breakout model seat – 1.5" forward. Measurements as compared to other seating options:
C. REACH SOLO SEAT – ’18 BREAKOUT STYLING, RED STITCH G. REACH TWO-UP SEAT – SPORT GLIDE STYLING - Stock ’18 Fat Bob model seat – 0.5" lower, 1.25" forward.
52000430 Grey Stitching. (SHOWN WITH ORIGINAL EQUIPMENT PILLION)
Fits ’18-’20 FXBR and FXBRS models equipped with Original 52000353
Equipment passenger pillion or Sundowner Pillion P/N Fits ’18-later FXFB and FXFBS models. Seat width 11.0";
52400225 or 52400169. Seat width 13.0". passenger pillion width 6.0".
Reach Seats
D. REACH SOLO SEAT – ’19 BREAKOUT STYLING, GREY STITCH H. REACH TWO-UP SEAT – FAT BOB STYLING
114 CRUISER CRUISER 115
Easy-care top grade One-piece design
Seat – Tallboy® vinyl seating surface accepts rider backrests
Seating – Hammock
TALLBOY® TWO-UP SEATS D. HARLEY® HAMMOCK TOURING SEATS
The correct riding position can help a tall rider sit comfortably Stay in the saddle all day. These Harley® Hammock seats
on the bike and avoid leg cramps and back strain during a long feature broad seating surfaces and a shallow bucket shape
day in the saddle. For riders with a longer inseam, a Tallboy® to distribute the weight and reduce pressure points. Beneath
Seat moves the rider up and back from the stock seating posi- the 2" of traditional dual-density foam, the rider’s weight is
tion to eliminate the “knees-high” riding position and effec- Contoured foam padding supported by a revolutionary fabric suspension system. The
tively place the body for a natural arm and leg reach to the sling-like suspension system is integrated into the seat and
controls. Tallboy Seats feature a bucket-shaped design and acts like a hammock, providing 2" of suspension above the
a wide seating surface to reduce pressure on the rider’s tail- seat pan. This internal system prevents bottoming out and
bone, without looking bulky or overstuffed. And the passenger provides a 30% improvement in comfort and endurance over
pillion is shaped and padded to maximize passenger comfort. the long haul by sheltering the rider from pothole and highway
The rich vinyl seating surface is accented with a round Harley- expansion joint impacts. The seat’s diamond-stitched vinyl
Davidson® medallion. surface is easy to clean and maintain, and it can be equipped
with an optional Rider Backrest for additional back support.
A. TALLBOY TWO-UP SEAT – DELUXE, HERITAGE, 52000294
Frame-hugging
SOFTAIL SLIM® AND STREET BOB® Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models. Seat
composite seat pan
Measurements as compared to other seating options: width 16.5"; passenger pillion width 10.75".
- Stock ’18 Deluxe model seat – 2.5" rearward, 1.0" higher. 52000290
- Stock ’18 Heritage model seat – 2.5" rearward, 1.0" higher. Elastomer fabric Sling suspension travel Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and
- Stock ’18 Slim model seat – 1.75" rearward, 1.75" higher. support sling provides 12% improvement in
FXST models. Seat width 16.0”; passenger pillion width 11.25”.
road shock isolation
- Stock ’18 Street Bob® model seat – 2.5" rearward, 1.0" higher.
Shown with:
52000355
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB , FXBBS and ADJUSTABLE RIDER BACKREST
FXST models. Seat width 14.5”; passenger pillion width 9.75”. A. TALLBOY TWO-UP SEAT – DELUXE, HERITAGE, SOFTAIL SLIM AND STREET BOB D. HARLEY HAMMOCK TOURING SEAT Add back support for long-haul riding comfort. This contoured
backrest pad is shaped to provide full lower back support with-
B. TALLBOY TWO-UP SEAT – FAT BOY® AND BREAKOUT® out pushing the rider forward and the slim profile maximizes
Measurements as compared to other seating options: the available passenger space. An adjustable support bracket
with four mounting locations accommodates different seats
- Stock ’18 Fat Boy® model seat – 3.5" rearward, 0.75" higher.
and riding positions. The backrest pad angle can be adjusted
- Stock ’18 Breakout® model seat – 1.75" rearward, 1.25" higher. for maximum comfort.
52000356
52300409
Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models. Seat Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS FLFB,
width 14.25"; passenger pillion width 10.0". FLFBS, FXBR, FXBRS, FXLRS, FXLRST and FXST models
equipped with Signature Hammock Seat P/N 52000290 or
C. TALLBOY TWO-UP SEAT – LOW RIDER® 52000294. Backrest pad width 11.25".
Measurements as compared to other seating options:
- Stock ’18 Low Rider® model seat – 2.75" rearward, 1.0" higher.
52000305
Fits ’18-later FLSB, FXLR, FXLRS and FXLRST models. Seat
width 14.5"; passenger pillion width 9.0".
SOFTAIL
B. TALLBOY TWO-UP SEAT – FAT BOY AND BREAKOUT D. HARLEY HAMMOCK TOURING SEATS
(FAT BOY MODEL SHOWN)
Tallboy Seats
SOFTAIL
seat to minimize the perceived bulk on a stripped-down Street
provide a firm but luxurious feel. Seat does not fit with passen- Bob® or Softail Slim® model.
ger pillions. 52000295
52000301 Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, ’20-later FXST FXST models. Seat width 14.25”; passenger pillion width 10.0”.
and ’21-later FXBBS models. Seat width 10.0". Does not fit
with passenger pillions. H. SUNDOWNER SEAT – FAT BOB®
Inspired by the styling of the Original Equipment Fat Bob seat,
D. BADLANDER® SEAT this Sundowner Two-Up Seat provides long range comfort for
Clean smooth covers, subtle top-stitching and a frame- both the rider and the passenger, without distracting from the
hugging profile add up to a statement only Harley could create. bike’s muscular personality.
The low design delivers a reduced seat height that is ideal for 52000349
riders that want the shortest possible reach to the ground, Fits ’18-later FXFB and FXFBS models. Seat width 14.0";
and the long and lean shape allows tall riders to move back passenger pillion width 10.25".
from the hand and foot controls without sitting higher on the
bike. This seat is wrapped in water-resistant vinyl and finished
I. SUNDOWNER SEAT – LOW RIDER®
with an embroidered Harley-Davidson script. Kit includes grab
Stitched to match the Original Equipment Low Rider® Seat,
strap and all mounting hardware.
this comfortable Sundowner Two-Up Seat is ready to deliver
52000300 you and your passenger to distant destinations in maximum
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and comfort and style.
FXST models. FLDE, FLSL, and FXBB models require
52000350
separate purchase of Passenger Footpegs and Passenger
Fits ’18-later FLSB, FXLR, FXLRS and FXLRST models. Seat
Footpeg Mounting Kit P/N 50500769 or 50500771. Seat
C. BRAWLER SOLO SEAT (52000301 SHOWN) H. SUNDOWNER SEAT – FAT BOB width 15.0"; passenger pillion width 12.25".
width 12.0"; passenger pillion width 5.5".
52000298
Fits ’18-later FLSB, FXLR, FXLRS and FXLRST models. Seat
width 11.0"; passenger pillion width 6.0".
SOFTAIL
pad with hook-and-loop tabs.
D. SUNDOWNER PASSENGER PILLION – DELUXE &
HERITAGE SOFTAIL®* 51076-10 Large Seat Pad.
Turn your Sundowner Solo Seat equipped ride into the ulti- Fits Softail®, Touring and Trike models with Original
mate two-up touring machine. Styled to match the Sundowner Equipment and accessory seats. Will not fit Bobber or Road
Solo Seat P/N 52000291, this seat will keep your passenger Zeppelin seats. Pad width – 16.0".
happy for hours in the saddle. 51078-10 Passenger Pillion Pad.
Fits Original Equipment and accessory passenger pillions.
52400168
Pad width – 13.0".
Fits ’18-later FLDE, FLHC and FLHCS models with
Sundowner Solo Seat P/N 52000291. Passenger pillion width 52300103 Wide Backrest Pad.
11.25". Fits wide profile rider and passenger backrest pads up to
12.0" wide and 9.0" tall.
E. SUNDOWNER PASSENGER PILLION – BREAKOUT®*
Shaped for maximum passenger comfort, this Sundowner J. RAIN COVERS*
Passenger Pillion is the perfect match for your Breakout® Featuring a handy storage sack, this black nylon, water-resis-
I. CIRCULATOR SEAT AND WIDE BACKREST PADS tant, Cordura® cover packs easily and shelters your seat from
model’s Original Equipment or Sundowner Solo Seat.
the storm.
Fits ’18-’20 FXBR and FXBRS models with Original Equipment 51638-97 Solo Seat.
solo seat, Sundowner Solo Seat P/N 52000429 or 52000292, Fits H-D® solo seats (except XR and FLSTS).
or Reach Solo Seat P/N 52000304 or 52000430. Passenger
51639-97 Two-Up.
pillion width 11.75".
Fits VRSC™, XG, XL, Dyna® and Softail models with Two-Up
52400169 Red Stitch. seats. Does not fit Touring and Trike models. Does not fit with
52400225 Grey Stitch. E. SUNDOWNER PASSENGER PILLION – E. SUNDOWNER PASSENGER PILLION – Rider Backrests.
BREAKOUT, RED STITCHING BREAKOUT, GREY STITCHING
F. SUNDOWNER PASSENGER PILLION – FAT BOY®*
This sculpted pillion will keep your passenger comfortable
as the miles add up. Styled to match the Fat Boy® Original
Equipment or Sundowner Solo Seat P/N 52000293.
52400170
Fits ’18-later FLFB and FLFBS models with Original
Equipment solo seat, Sundowner Solo Seat P/N 52000293,
or Reach Solo Seat P/N 52000352. Passenger pillion width
12.0".
*WARNING: Do not install on models that are not *WARNING: Do not use while riding; could result in
equipped with passenger footpegs. Doing so could death or serious injury.
result in death or serious injury.
F. SUNDOWNER PASSENGER PILLION – G. PASSENGER PILLION – FXDR 114 STYLING J. RAIN COVER – SOLO SEAT J. RAIN COVER – TWO-UP
FAT BOY
120 CRUISER CRUISER 121
Seating – Accessories
A. TUCK & ROLL SOLO SADDLE
This Solo Saddle features a classic tuck & roll vinyl seat-
ing surface that is wrapped around a poured and contoured
pad that maximizes comfort while maintaining the minimal-
istic “just enough to ride” look. Easy to install, the combina-
tion of the bolt-on seat and the model-specific Spring Seat
Installation Kit (sold separately) includes everything you need THE F LE X I B I L I T Y OF S U P PO R T
to get the bobber look. The Installation Kit includes beehive-
style springs that help cushion the ride, or for maximum old
school style, add the low profile Rigid Mount Kit for a truly
slammed look.
52000315
Fits ’18-later FLSL, FXBB, FXBBS and FXST models. A HoldFast™ detachable sissy bar and passenger backrest pad is the starting point to build a complete touring machine.
Installation requires purchase of Spring Saddle Mounting Kit
P/N 52100029. Does not fit with passenger pillions. The backrest provides long-range comfort and support while adding a feeling of control and
A. TUCK & ROLL SOLO SADDLE B. BOBBER SOLO SADDLE – confidence for the passenger. Once the Docking Hardware Kit is installed, adding or removing a HoldFast detachable
B. BOBBER SOLO SADDLES ANTIQUE BROWN LEATHER
The smooth gloss black metal seat pan provides a clean,
custom look. Easy to install, the combination of the bolt-on accessory is a simple “pivot and click” proposition.
seat and the model-specific Spring Seat Installation Kit (sold
separately) includes everything you need to get the bobber
look. The Installation Kit includes beehive-style springs that
help cushion the ride, or for maximum old-school style, add
the low profile Rigid Mount Kit for a truly slammed look.
52000381 Antique Brown Leather.
D E T A C H I N G A H O L D F A S T™ A C C E S S O R Y
Fits ’18-later FLSL, FXBB, FXBBS and FXST models.
Installation requires purchase of Spring Seat Mounting Kit
P/N 52100029. Does not fit with passenger pillions.
SOFTAIL
52100029
Fits ’18-later FLSL, FXBB, FXBBS, FXLRS, FXLRST and FXST
models.
E. QUICK-RELEASE SEAT HARDWARE KIT backrest to engage the rear docking points, and lock and pivot forward to clear the rear docking points.
A raised-logo Harley-Davidson emblem finishes the look. SAE it into place with a gentle downward push. That’s all there is to do. Lift the upright free from the front docking points, and you’re done.
1/4"-20 thread.
Fits ’97-later XG, XL, Dyna®, Softail® (except ’12-’17 FLS
models equipped with Original Equipment seat), Touring and
Trike models equipped with SAE 1/4"-20 seat mount hard- A. HOLDFAST™ DOCKING HARDWARE KIT
ware. Does not fit seats equipped with spring-loaded rear seat The ideal choice for maximum versatility, this complete
bracket. kit contains the docking hardware necessary to install all
51676-97A Chrome. E. QUICK-RELEASE SEAT HARDWARE KIT – E. QUICK-RELEASE SEAT HARDWARE KIT –
HoldFast™ detachable accessory options. Even if you only
CHROME GLOSS BLACK
10500093 Gloss Black. install a passenger backrest today, this kit allows you to add
additional accessories as your touring demands change.
F. SEAT MOUNTING NUTS – GLOSS BLACK Kit includes docking points to allow installation of H-D®
No tools required. Sold in pairs. Detachables™ Sissy Bar, Solo Luggage Rack, Two-Up Luggage
Rack, Solo Tour-Pak® Rack or Two-Up Tour-Pak Rack.
10400049
Fits all Softail and Touring models with Original Equipment or Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models.
Genuine Motor Accessory 2-piece seat and knurled seat
52300643 Chrome.
mounting nuts.
52300644 Gloss Black.
G. TANK KNEE PAD KIT Fits '18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXFB,
These self-adhesive rubber knee pads provide a touch of old- FXFBS, FLSB, FXLR, FXLRS, FXLRST and FXST models.
school style. The rich black rubber pads feature tapered ribs
52300645 Chrome.
and a raised Bar & Shield logo to protect the surfaces where
your legs contact the tank. The compact pads measure 7.0" by 52300646 Gloss Black.
2.75", and are flexible enough to fit many tank profiles. Sold in
matched pairs.
57300065
Fits fuel tanks on many Harley-Davidson Street®, Sportster®,
Dyna and Softail models. May cover a portion of fuel tank
graphics; check appearance before adhering to tank.
SOFTAIL
52300432 Standard-Height, Chrome.
(DELUXE MODEL SHOWN) (HERITAGE SOFTAIL MODEL SHOWN)
52300434 Standard-Height, Gloss Black.
52300433 Short, Chrome.
52300435 Short, Gloss Black.
A. STANDARD-HEIGHT HOLDFAST SISSY BAR A. SHORT HOLDFAST SISSY BAR UPRIGHT – B. ONE-PIECE TALL RIGID MOUNT SISSY BAR C. PASSENGER BACKREST PAD –
UPRIGHT – GLOSS BLACK GLOSS BLACK 21" TALL SISSY BAR
(LOW RIDER MODEL SHOWN) (LOW RIDER MODEL SHOWN)
124 CRUISER CRUISER 125
Backrests & Racks Backrests & Racks
A. PASSENGER BACKREST PAD – COMPACT D. SPORT LUGGAGE RACK FOR HOLDFAST™ SISSY BAR
Sized to complement low-profile custom seats, this Compact UPRIGHTS*
Passenger Backrest Pad combines practical passenger Smooth sweeping curves and the brilliant chrome or gloss
support with custom compact style. Pads include mounting black finish defines the look of this Sport Luggage Rack.
bracket and hardware required for attachment to sissy bar Designed to complement both short and standard-height
upright. Pad height 3.75"; width 6.5". HoldFast™ Sissy Bar Uprights, this sleek rack adds a practi-
cal and stylish touch to the motorcycle. When firmly bolted
Fits ’18-later Softail® models equipped with Short or Standard to the HoldFast Sissy Bar system, the combined backrest
Height HoldFast™ Sissy Bar Uprights. Also fits Touring models and luggage rack can be installed or removed from the bike
equipped with Short H-D® Detachables™ Passenger Sissy Bar in seconds for a truly versatile touring or cruising machine.
Upright P/N 52935-04A, 52610-09A or 54248-09A. Will not fit For convenient packing, the side supports of these round bar
seats with tall passenger pillion pads. racks are slotted to accept nylon luggage tie-down straps.
52300559A Smooth Black Vinyl.
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and
52300558A Fat Bob Styling.
FXST models equipped with HoldFast Sissy Bar Upright.
52300555A Red Stitch Breakout Styling.
50300124A Chrome.
52300617A Grey Stitch Breakout Styling. A. PASSENGER BACKREST PAD – A. PASSENGER BACKREST PAD – 50300125A Gloss Black.
52300556A Fat Boy Styling. SMOOTH BLACK VINYL FAT BOB STYLING
Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models equipped
B. PASSENGER BACKREST PAD – MID-SIZED with HoldFast Sissy Bar Upright.
Sized to fit both Low and Standard-Height HoldFast Sissy 50300126A Chrome.
Bar Uprights, these Mid-Sized Backrest Pads feature a gentle 50300127A Gloss Black.
curved shape that cradles the spine and provides hours of
passenger comfort. Pad height 7.0"; width 6.75". Fits ’18-later FLSB, FXFB, FXFBS, FXLR, FXLRS and FXLRST
D. SPORT LUGGAGE RACK FOR HOLDFAST SISSY D. SPORT LUGGAGE RACK FOR HOLDFAST SISSY models equipped with HoldFast Sissy Bar Upright.
Fits ’18-later Softail models equipped with Standard Height BAR UPRIGHTS – CHROME BAR UPRIGHTS – GLOSS BLACK
HoldFast Sissy Bar Uprights. Also fits Touring models 50300130 Chrome.
(LOW RIDER MODEL SHOWN) (LOW RIDER MODEL SHOWN)
equipped with Standard-Height H-D Detachables Passenger 50300131A Gloss Black.
Sissy Bar Uprights P/N 52300324, 52627-09A, 54247-09A,
52933-97C or 52805-97B, Tall H-D Detachables Passenger E. HOLDFAST™ TWO-UP LUGGAGE RACK*
Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Low-profile styling defines the look of this Two-Up Luggage
Sissy Bar Upright 52300257 or 52300258. Rack. Designed to be installed without a sissy bar, this rack is
52300560 Smooth Black Vinyl. ideal for carrying everything you need on your daily commute.
These HoldFast™ Luggage Racks feature an exclusive latch
52300557 Low Rider Styling. system that permits the rack to be installed or removed in
seconds, adding versatility to your ride. The HoldFast rack
C. STYLED BACKREST PAD MOUNT simply slips into position on the docking points, and the finger-
This custom Backrest Mounting Plate replaces the stamped tip latches are clicked into position for a positive lock. Available
metal mount for a distinctive look. The mirror-finished bracket, in mirror chrome or rich gloss black finish, the leading edge of
chrome-plated mounting hardware and Vivid Black insert the rack features a flip design that keeps luggage from slid-
contrasts with a leather or vinyl backrest pad to dress your ing forward, and provides a convenient tie-down attachment
Touring bike in style. A. PASSENGER BACKREST PAD – A. PASSENGER BACKREST PAD –
’18 BREAKOUT STYLING, RED STITCH ’19-’20 BREAKOUT STYLING, GREY STITCH point.
SOFTAIL
52825-05
Fits Touring models equipped with H-D Detachables Sissy Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and
Bar Upright P/N 52805-97B, 52935-04A, 52933-97C, 52723- FXST models equipped with two-up seats. Installation requires
06A, 52610-09A, 52627-09A, 52300257 or 52300258. Also separate purchase of model-specific Docking Hardware Kit.
fits ’18-later Softail models equipped with HoldFast Sissy Bar FLHC and FLHCS models with oversize international regis-
Uprights (except if equipped with Compact Size Pad). tration plates may interfere with Luggage Rack and may
requires separate purchase of License Plate Relocation Kit
P/N 67900472.
50300133 Gloss Black.
Fits ’18-later FLSB, FXLR, FXLRS and FXLRST models
equipped with two-up seats. Installation requires separate
purchase of model-specific Docking Hardware Kit.
50300136 Chrome.
E. HOLDFAST TWO-UP LUGGAGE RACK – E. HOLDFAST TWO-UP LUGGAGE RACK – Fits ’18-later FXFB and FXFBS models equipped with two-up
CHROME GLOSS BLACK seats. Installation requires separate purchase of model-
(LOW RIDER MODEL SHOWN) (FAT BOB MODEL SHOWN) specific Docking Hardware Kit.
50300140 Gloss Black.
B. PASSENGER BACKREST PAD – MID-SIZED C. STYLED BACKREST PAD MOUNT F. HOLDFAST LOCKING LATCH – CHROME F. HOLDFAST LOCKING LATCH – CHROME
LOW RIDER STYLING (TOUR-PAK RACK)
126 CRUISER CRUISER 127
Saddlebags Saddlebags
A. H-D® DETACHABLES™ SADDLEBAGS D. H-D® DETACHABLES™ LOCKING SADDLEBAGS
Sized for commute to work or a ride across the country, these Shaped to complement the flowing lines of the Softail® cruiser
modern bags are styled to complement the stripped down models, these premium saddlebags feature a classic slant-
look of the Softail® cruiser models. These modern waterfall- style design with a modern twist. Wrapped in a combination
style saddlebags are completely removable with the simple of smooth and perforated-look vinyl, the hardshell bags will
pull of the internal handle and a rearward slide, leaving your retain their shape in all kinds of weather. The hinged locking lid
bike stripped down and unencumbered. When removed, the tilts outward for easy one-handed access. And when your trip
bag leaves behind simple, inconspicuous docking points. The is over, the bags can be removed with the simple turn of the
bags feature a flip back lid and a reinforced vinyl-wrapped internal lever, leaving behind nothing but inconspicuous dock-
body with perforated style panels that complement stock ing points. Bags include all required mounting hardware, and
and many accessory seats. The bags are finished with nickel can be installed with HoldFast™ sissy bars and racks when
snap-to-close hardware and a black chrome Harley-Davidson® equipped with model-specific docking hardware.
signature medallion. Bags include all required mounting hard- 90201555A
ware, and can be installed with HoldFast™ sissy bars and Fits ’18-’20 FLDE models. Luggage capacity: 2,970 cubic
racks when equipped with model-specific docking hardware. inches total.
Luggage capacity: 2,170 cubic inches total
90201513A
90201561A Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models.
Fits ’18-later FLSL, FXBB, FXBBS, FXLR, FXLRS and FXST Installation requires separate purchase of License Plate/Turn
models. Installation requires separate purchase of License Signal Relocation Kit P/N 67800802 or 67800830. Luggage
Plate/Turn Signal Relocation Kit P/N 67800802 or capacity: 2,840 cubic inches total.
67800830.
E. RIGID MOUNT SADDLEBAGS – SOFTAIL DELUXE
B. H-D DETACHABLES LEATHER SADDLEBAGS – STYLING
NOSTALGIC STYLE These premium saddlebags are ready to go the distance.
A. H-D DETACHABLES SADDLEBAGS D. H-D DETACHABLES LOCKING SADDLEBAGS – BREAKOUT SHOWN
These traditional throw-over style leather saddlebags are Styled to complement the Softail® Deluxe model’s profile,
completely removable with the simple pull of the internal these bags offer plenty of storage for a trip across town or
handle, leaving your bike clean and ready to cruise the boule- across the country. The fine textured vinyl surface and black
vard. When removed, the bag leaves behind simple, inconspic- chrome medallion add an elegant touch, and the hard-shell
uous docking points. Styled to complement the unique look body retains its shape in all kinds of weather. The push-button
of the stripped-down Softail Slim® and Street Bob® models, latching lids swing open with one hand for easy loading, and
these bags feature a leather tub and a reinforced lid that are lockable for added security. The bags are compatible with
complement stock and many accessory seats. The tradi- HoldFast accessories when installed with the appropriate
tional leather straps and the brass buckles and hardware add docking hardware kits. Kit includes reflectors. Total luggage
a distinctive retro look. Bags include all required mounting capacity: 2,510 cubic inches.
hardware, and can be installed with HoldFast sissy bars and
90201558
racks when equipped with model-specific docking hardware.
Fits ’18-’20 FLDE models.
Luggage capacity: 2,170 cubic inches total.
90201552A F. SINGLE-SIDED SWINGARM BAG
Fits ’18-later FLSL, FXBB, FXBBS, FXLR, FXLRS and FXST Less is more. With enough room for the essentials, these styl-
models. Installation requires separate purchase of License ish Swingarm Bags eliminate the need to stuff your pockets
Plate/Turn Signal Relocation Kit P/N 67800802 or or bungee a bag across the passenger pillion. Shaped to hug
SOFTAIL
67800830.. the contour of your bike’s frame, these compact bags add an
old-school look. Bags are constructed of heavyweight leather
Shown with:
and feature a pouch-style flap lid that is secured with two
REAR TURN SIGNAL/LICENSE PLATE traditional straps and buckles. The semi rigid-backed bag is
RELOCATION KIT secured to the left side of the bike with easy-to-install adjust-
Required for saddlebag installation on certain Softail models, able straps. Luggage capacity: 450 cubic inches total.
these elegant sweeping mounts move the turn signals and the
side-mount rearward on the fender struts, maintaining the SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN
stock lines. Available in chrome or gloss black to match the LEATHER
Original Equipment fender strut covers. Crafted from supple brown pull-up leather, this classic
Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXFB, FXFBS, Swingarm Bag will gain character and a well-worn authen-
FXBR, FXBRS, FXLR, FXLRS and FXST models. tic look with use. The flip-open lid is secured with traditional
straps and buckles, and the bag features antique hardware
67800802 Chrome. that complements the old-school look.
67800830 Black. B. H-D DETACHABLES LEATHER SADDLEBAGS – NOSTALGIC STYLE E. RIGID MOUNT SADDLEBAGS – SOFTAIL DELUXE STYLING 90201568
Fits ’00-later Softail® models (except FLSTC, FLSTNSE,
C. H-D DETACHABLES SADDLEBAGS – BRASS TRIM
FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
Trimmed with classic valise straps, brass buckles and a match-
equipped with left-hand toolbox, passenger footboards,
ing brass Harley-Davidson® signature medallion, these bags
chrome swingarm covers, saddlebags, or saddlebag guards.
are the perfect complement to your custom ride. These large-
capacity lockable detachable saddlebags are completely
SINGLE-SIDED SWINGARM BAG – BLACK LEATHER
removable with the simple pull of the internal handle, leav-
Constructed with heavy boot-grade leather, this rich black
ing your bike clean and ready to cruise the boulevard. When
Swingarm Bag is the perfect complement to any paint color
removed, the bags leave behind two simple, inconspicuous
or customizing style. The flip-open lid is secured with quick-
docking points. These handsome slant-style bags feature
disconnect clips hidden behind the traditional leather straps
push-button latching swing-out lids that are easy to operate
and brushed nickel-finished buckles.
with one hand. The hard-shell design retains its shape in all
kinds of weather, and the locking hinged lids offer modern 90201567
convenience and security. Bags include all required mounting Fits ’00-later Softail models (except FLSTC, FLSTNSE,
hardware, and can be installed with HoldFast™ sissy bars and FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
racks when equipped with model-specific docking hardware. equipped with left-hand toolbox, passenger footboards,
chrome swingarm covers, saddlebags, or saddlebag guards.
90201645A
Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models.
Installation requires separate purchase of License Plate/Turn
Signal Relocation Kit P/N 67800802 or 67800830. Luggage
capacity: 2,840 cubic inches total.
90201644A NOTE: Some Harley-Davidson® saddlebags are made of
Fits ’18-’20 FLDE models. Luggage capacity: 2,970 cubic leather. Fine leathers or other natural materials WILL gain
inches total. “character,” such as wrinkles or wear, with age. This is normal.
A fine, aged patina and character wrinkles are a sign of the
NOTE: Some Harley-Davidson® saddlebags are made of extremely high-quality materials used to construct your
leather. Fine leathers or other natural materials WILL gain saddlebags. The appearance of scars or marks on the leather
“character,” such as wrinkles or wear, with age. This is normal. is a result of using natural leather panels and should not be
A fine, aged patina and character wrinkles are a sign of the thought of as an imperfection. Please use Harley-Davidson®
extremely high-quality materials used to construct your Leather Protectant P/N 93600034 to protect your investment.
saddlebags. The appearance of scars or marks on the leather C. H-D DETACHABLES SADDLEBAGS – BRASS TRIM F. SINGLE-SIDED SWINGARM BAG – ANTIQUE F. SINGLE-SIDED SWINGARM BAG – BLACK
is a result of using natural leather panels and should not be (BREAKOUT MODEL SHOWN) BROWN LEATHER LEATHER
thought of as an imperfection. Please use Harley-Davidson®
Leather Protectant P/N 93600034 to protect your investment.
128 CRUISER CRUISER 129
Saddlebags Tour-Pak® Luggage
A. BLACK STANDARD LINE THROW-OVER SADDLEBAGS TOUR-PAK® LUGGAGE
Made of ultra-durable leather-like synthetic featuring a When you’re serious about racking up the miles, Tour-Pak®
debossed H-D #1 logo, the Black Standard Line Bags have luggage systems allow you to pack everything you need for
a simple, black on black style that complements many styl- a cross-country trip or a run to the grocery store. Each style
ing directions and budgets. An internal reinforcement system of Tour-Pak Luggage features a lockable lid and a matching
maintains the bag’s shape over time. The “MOLLE-style” backrest pad. And, when you arrive at your destination, the
system of mounting loops accommodate hook and loop Tour-Pak and its HoldFast™ Mounting Rack can be removed in
straps and allow for versatility in mounting. The bags feature seconds to return your bike to a stripped-down profile. Each
matte black enamel buckles with hidden quick-detach buckles Tour-Pak has a capacity of 2,580 cubic inches (enough to fit
underneath. These Throw-Over Bags feature side gussets for one full-face helmet or two half helmets) and measures 18.5”
increased capacity and straight and perpendicular mounting W x 18.75” D x 12.25” H. Mounting racks and docking kits are
loops for easy mounting. Quick-release buckles get you in and sold separately.
out of the bag fast. These Throw-Over Bags can be used with
or without a passenger pillion. If used with a passenger pillion, Fits ’18-later FLDE, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBBS,
the straps should be mounted under the pillion and the cross- FXLRS and FXST models equipped with HoldFast Detachable
over straps feature a soft, non-scratch backing. Installation Solo or Two-Up Tour-Pak Mounting Rack.
requires purchase of Saddlebag Support Rails and may A. BLACK STANDARD LINE THROW-OVER SADDLEBAGS – LARGE
require the purchase of a Turn Signal Relocation Kit. Large bag F. TOUR-PAK LUGGAGE – HERITAGE STYLE
measures: 16.5" L x 11.5" H x 7" D. Internal capacity: 1,350CI. Accented with twin rows of blacked-out rectangular studs, this
Weight capacity: 10 lbs/bag. Compact bag measures: 10" L x Tour-Pak is the perfect match for the seats and saddlebags on
11.5" H x 5.25" D. Internal capacity: 600CI. Weight capacity: your Heritage Softail® model.
6 lbs/bag. 53000598
Fits ’82-later XL (except XL1200T), ’08-’17 Dyna® (except
G. TOUR-PAK LUGGAGE – SMOOTH VINYL
FLD), ’84-’99 Softail®, and ’18-later Softail models equipped F. TOUR-PAK LUGGAGE – HERITAGE STYLE G. TOUR-PAK LUGGAGE – SMOOTH VINYL Styled to complement a wide variety of Softail® seats and
with H-D® Saddlebag Supports. ’18-later Softail models
saddlebags and features fine-grain texturing with perforated
require purchase of Turn Signal Relocation Kit P/N 67800802
side panels.
or 68700830.
53000570
90201770 Large.
90201769 Compact. HOLDFAST™ DETACHABLE TOUR-PAK LUGGAGE
MOUNTING RACK
B. SADDLEBAG SUPPORTS – GLOSS BLACK Harley-Davidson HoldFast docking hardware allows you
Required to keep your throw over-style saddlebags away from to transform your ride in the blink of an eye. Switch from a
the wheel, swingarm and brake caliper. Fits with or without comfortable passenger backrest to load-hauling Tour-Pak
Sissybar Uprights. luggage in seconds. You can easily remove the Tour-Pak
90201777 luggage for easy maneuverability around town and reinstall
Fits ’18-later FLSL, FXBB, FXBBS and FXST models. Required it for an epic ride across the country. Tour-Pak Luggage and
with Throw-Over Saddlebags P/Ns 90201770 or 90201769. model-specific Docking Hardware Kits sold separately.
C. SADDLEBAG TRAVEL-PAKS – HERITAGE MODEL A. BLACK STANDARD LINE THROW-OVER B. SADDLEBAG SUPPORTS – GLOSS BLACK H. HOLDFAST SOLO TOUR-PAK LUGGAGE
Simplify packing and unpacking your motorcycle. Made SADDLEBAGS – COMPACT MOUNTING RACK
SOFTAIL
from water-resistant material, these liners are designed to fit The Solo Tour-Pak Mounting Rack moves the Softail Tour-Pak
into the Original Equipment saddlebags on Heritage Classic luggage forward to a comfortable rider-supporting position.
models and Softail® Deluxe Rigid Mount Saddlebags P/N Designed for use with a solo seat, this Rack positions the Tour-
90201558. The Travel Pak bags feature two-way zippers for Pak luggage over the fender to serve as a backrest for the rider.
easy access, and embossed Bar & Shield patches for style. Tour-Pak can be repositioned forward or aft over a .75" range
93300107 to maximize rider space. Simple fingertip operated latches
Fits ’18-later FLHC and FLHCS models with Original release the rack from the docking hardware for easy removal.
Equipment saddlebags. Also fits FLDE models equipped with
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and
Softail Deluxe Rigid Mount Saddlebags P/N 90201558.
FXST models equipped with a solo seat. Installation requires
separate purchase of model-specific Docking Hardware Kit.
D. SADDLEBAG TRAVEL-PAKS – SPORT GLIDE® MODEL
Simplify packing and unpacking your motorcycle. These well- 50300174 Chrome.
constructed water-resistant bags are designed to fit perfectly 50300176 Gloss Black.
into the Sport Glide® model’s saddlebags. The soft sides
conform to the interior of the luggage to help use every avail- H. HOLDFAST SOLO TOUR-PAK LUGGAGE H. HOLDFAST SOLO TOUR-PAK LUGGAGE I. HOLDFAST TWO-UP TOUR-PAK MOUNTING RACK
able inch of space. Styled with a Bar & Shield logo, these bags MOUNTING RACK – CHROME MOUNTING RACK – GLOSS BLACK With the HoldFast Two-Up Tour-Pak Mounting Rack, you can
feature heavy-duty zippers, comfortable carrying handles and change your riding style in seconds. With a simple pull of the
convenient D-rings for optional shoulder straps. HoldFast latches, you can convert your bike from a touring
93300110 machine with a Tour-Pak to a street cruiser with a detachable
Fits ’18-’21 FLSB models. sissy bar upright. When using a Tour-Pak, the rack is adjust-
able over a .75" range, allowing the Tour-Pak to be located for
E. SADDLEBAG GUARDS maximum passenger room and comfort.
Saddlebag guards provide a style borrowed from the past that C. SADDLEBAG TRAVEL-PAKS – HERITAGE D. SADDLEBAG TRAVEL-PAKS – SPORT GLIDE
MODEL MODEL Fits ’18-later FLDE, FLHC and FLHCS models equipped with a
makes a unique statement here and now. Includes mounting two-up seat. Installation requires separate purchase of model-
hardware and instructions. specific Docking Hardware Kit. FLHC and FLHCS models with
Fits ’18-later FLHC and FLHCS models. oversize international registration plates may interfere with
Luggage Rack and may requires separate purchase of License
90201312 Chrome. Plate Relocation Kit P/N 67900472.
90201315 Black.
50300186 Chrome.
50300188 Gloss Black.
Fits ’18-’21 FLSB models equipped with a two-up seat.
Installation requires separate purchase of model-specific
Docking Hardware Kit.
50300192 Gloss Black.
NOTE: Some Harley-Davidson® saddlebags are made of
leather. Fine leathers or other natural materials WILL gain
“character,” such as wrinkles or wear, with age. This is normal.
A fine, aged patina and character wrinkles are a sign of the
extremely high-quality materials used to construct your
saddlebags. The appearance of scars or marks on the leather
is a result of using natural leather panels and should not be
thought of as an imperfection. Please use Harley-Davidson®
Leather Protectant P/N 93600034 to protect your investment.
E. SADDLEBAG GUARDS – CHROME E. SADDLEBAG GUARDS – BLACK I. HOLDFAST TWO-UP TOUR-PAK MOUNTING I. HOLDFAST TWO-UP TOUR-PAK MOUNTING
RACK – CHROME RACK – GLOSS BLACK
(FLSB MODEL SHOWN)
130 CRUISER CRUISER 131
Suspension Foot Controls
A. PROFILE® LOW FRONT SUSPENSION* D. STANDARD FORWARD CONTROL MOUNTS – CHROME
Designed by Harley-Davidson and Showa®, this kit reduces the This kit replaces the factory painted forward control mounts
front fork length by over 1.0". This Profile® Low front suspen- with brilliant chrome. Finished to complement chrome or
sion utilizes dual bending valve technology to preserve orig- polished foot pegs and levers, these supports are manufac-
inal ride quality. Springs are wound to allow a compliant, yet tured from Original Equipment components for proper fit.
controlled ride. A perfect addition during the installation of Kit includes left and right supports and chrome mounting
chrome or gloss black lower fork sliders, the kit includes two hardware.
fork springs, two damper tubes, seals and hardware. 50500693
45500427 Fits ’18-later FLSB, FXFB, FXFBS, FXBR, FXBRS and FXDRS
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXLR models with forward controls.
and FXST models. FLDE model requires separate purchase of
Jiffystand P/N 50000156. FXBB, FXBBS and FXST models E. RIDER FOOTBOARD MOUNTS – CHROME
require separate purchase of Jiffy Stand P/N 50000127. Complete the custom transformation by replacing the stock
FLHC and FLHCS models must be equipped with Profile Low painted footboard brackets with brilliant chrome. The perfect
Rear Suspension P/N 54000134 and requires separate complement to custom footboards, this kit is manufactured
purchase of Jiffystand P/N 50000156.. with Original Equipment components for proper fit, and are
D. STANDARD FORWARD CONTROL MOUNTS – E. RIDER FOOTBOARD MOUNTS – CHROME
polished and plated to a brilliant finish. Kit includes chrome
CHROME
B. PROFILE LOW REAR SUSPENSION* mounting hardware.
This suspension lowers the seat height approximately .75" 50500695
while preserving ride quality. Spring and damping rates are Fits ’18-later FLDE, FLHC, FLHCS and FLSL models with rider
tailored to ensure a controlled ride. Shock features multi- footboards.
staged damping to ensure optimal performance under vary-
50500696
ing conditions. The pre-load adjuster allows easy access for
Fits ’18-later FLFB and FLFBS models with rider footboards.
setting proper sag according to rider’s weight for optimal
comfort. Kit includes one rear shock absorber.
F. EXTENDED REACH FORWARD CONTROL KIT*
54000134 Stretch out in the saddle. This kit extends the rider foot
Fits ’18-later FLHC and FLHCS models. Installation requires controls a full 3.0" forward of the stock location, providing the
separate purchase of Jiffy Stand P/N 50000127 if not tall rider a comfortable riding position. This comprehensive
equipped with Profile Low Front Suspension P/N 45500427. kit includes everything necessary for installation. Kit includes
54000143 new black painted brake and shifter mounting assemblies,
Fits ’18-later FXFB and FXFBS models. Installation requires extended shift rod, brake line and all necessary hardware. The
separate purchase of Jiffy Stand P/N 50000127. kit is compatible with Original Equipment or accessory foot-
pegs, brake and shift levers and brake pedal pad and shifter
C. TALL REAR SHOCK* peg.
This tall rear shock can be used to raise the motorcycle seat 50500840
height for comfort or to increase lean angle for more corner- Fits ’18-’20 FXBR and FXBRS models with ABS. Not
ing clearance during aggressive riding. Increased rear wheel compatible with Engine Guards.
travel may improve comfort and reduce suspension bottom-
50500837
ing for some riders. Pre-load is adjustable using a Spanner
Fits ’18-later FLSB, FXFB and FXFBS models with ABS. Not
Wrench (sold separately) to dial in sag based on weight of rider, A. PROFILE LOW FRONT SUSPENSION F. EXTENDED REACH FORWARD CONTROL KIT
compatible with Engine Guards.
passenger and luggage, for ideal handling and ride. Designed
SOFTAIL
and validated by Harley-Davidson for fit and performance you
G. STANDARD FORWARD CONTROL KIT*
can count on.
Stretch out for maximum comfort and style. This complete kit
54000294 includes all components necessary to convert a mid control-
Fits ’18-later Softail models (except FLHC, FLHCS, FXFB, equipped ’18-later Softail® model to forward controls. Moves
FXFBS, FLFB, FLFBS and ’21-later FXLRS). Also fits ’17’-20 controls 7.5" forward from mid control foot position. Kit is
FXLRS. Original Equipment on ’22-later FXLRS models. B. 54000134 B. 54000143
available in chrome to match your customizing style.
Fits ’18-later FXBB, FXBBS, FXLR, FXLRS, FXLRST and FXST
models. Compatible with Original Equipment or Accessory
Footpegs that fit those models.
50700061 Chrome
C. 54000294
B. ACCESSORY MID-CONTROLS
These Mid-Control Kits place the shift side and brake side
mid-control components in an Accessory configuration that
can be installed without changing other components on the
motorcycle.
50502040 Brake Side.
Fits ’18-later FLSB, FXFB, FXFBS, and FXDRS models.
SOFTAIL
Requires separate purchase of Accessory Mid-Controls -
Shift Side P/N 50502041.
50502041 Shift Side.
Fits ’18-later FLSB, FXFB, FXFBS, and FXDRS models.
Requires separate purchase of Accessory Mid-Controls -
Brake Side P/N 50502040.
SOFTAIL
footboards. Also fits ’18-later FXBB, FXBBS, and FXLR models and decorative acorn nuts and bolts for a complete custom
and ’20-later FXLRS, FXLRST and FXST models equipped with look.
Standard Forward Control Kits P/N 50700060 or 50700061.
Fits ’86-later Softail (except ’18-later FXBB, FXBBS, FXLR,
33600167 Chrome. FXLRS, FXLRST and ’20-later FXST), Touring and Trike models.
33600168 Satin Black. Satin Black (Does not fit ’97-’99 FLSTS or models equipped with Softail
33600169 Edge Cut. Extended Reach Forward Controls.)
1 1. 34018-08 Slotted Black Anodized.
D. BILLET STYLE HEEL/TOE SHIFT LEVER 2. 34850-09 Skull.
Add a traditional heel-toe shift action and a contemporary 3. 33801-09 Harley-Davidson Script.
new look. These Billet Style Shift Levers are forged from alumi-
num, then machined and polished for a beautiful, custom 4. 33760-09 Slotted with Bar & Shield Logo.
finish. Available in your choice of mirror chrome, satin black 5. 33814-98A Round.
powder coat or edge cut black anodized and machined alumi-
num finishes. Kit includes a front and rear lever and chrome Edge Cut
hardware. 2
Fits ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS and FLSL
models equipped with footboards.
33600164 Chrome.
33600165 Satin Black.
33600166 Edge Cut.
C. BILLET STYLE REAR SHIFT LEVER – C. BILLET STYLE REAR SHIFT LEVER –
FORWARD CONTROLS – CHROME FORWARD CONTROLS 3
Satin Black
Edge Cut 5
D. BILLET STYLE HEEL/TOE SHIFT LEVER – D. BILLET STYLE HEEL/TOE SHIFT LEVER H. CUSTOM GEAR SHIFT LINKAGES
CHROME
136 CRUISER CRUISER 137
Foot Controls Foot Controls
A. PASSENGER FOOTPEG SUPPORT KIT E. PASSENGER FOOTBOARD PAN KIT – CHROME
Add footpeg to your solo seat-equipped ’18-later Softail® Replace the factory black painted passenger footboard with
motorcycle. Available in chrome or gloss black finish, the kit the custom look of smooth chrome. These chrome-plated
includes left and right footpeg supports and mounting hard- Footboard Pans are ready to install using your Original
ware. Footpegs and footpeg hardware sold separately. Equipment hardware and the kit includes left- and right-side
Footboard Pans. Just add your choice of Footboard Insert for
Fits ’18-later Softail (except FXDRS) models. Does not fit with the finishing touch. Footboard Supports sold separately.
Swingarm Pivot Bolt Cover P/N 61400344.
50500769 Gloss Black. Fits ’06-’17 Dyna®, ’18-later Softail® (except FXDRS, FXFB and
FXFBS) and ’86-later Touring models equipped with passen-
50500771 Chrome.
ger footboard supports. Does not fit Trike models.
B. PASSENGER FOOTPEG MOUNTING KIT – FXDR® 114 50501144 Classic Style.
A necessary addition when converting your solo seat FXDR® 50501147 Contemporary Style.
114 model to a two-up passenger-carrying ride. Kit includes
black mounting adapters and brackets (footpegs sold F. PASSENGER FOOTBOARD PAN KIT – BLACK
separately). Complete the blacked-out transformation. Replace your
A. PASSENGER FOOTPEG SUPPORT KIT – A. PASSENGER FOOTPEG SUPPORT KIT – E. PASSENGER FOOTBOARD PAN KIT – E. PASSENGER FOOTBOARD PAN KIT –
50501128 Black. chrome Passenger Footboard Pans with sinister black. Kit
GLOSS BLACK CHROME CHROME, CLASSIC STYLE CHROME, CONTEMPORARY STYLE
Fits ’19-’20 FXDRS models. includes left- and right-side Footboard Pans and is installed
using the Original Equipment hardware. Custom Footboard
C. PASSENGER FOOTBOARD SUPPORT KIT Inserts and Footboard Supports sold separately.
Add the comfort and convenience of passenger footboard to Fits ’06-’17 Dyna, ’18-later Softail (except FXDRS, FXFB and
your motorcycle. These brackets and supports are designed FXFBS) and ’86- later Touring models equipped with passen-
to allow installation of Passenger Footboards (sold separately). ger footboard supports. Does not fit Trike models.
Brackets and Supports are sold separately.
50501610 Classic Style.
Fits ’18-later Softail models equipped with Passenger 50501611 Contemporary Style.
Footboard Support Bracket P/N 50501117 or P/N 50501118.
Requires separate purchase of model-specific Passenger G. TRADITIONAL PASSENGER FOOTBOARD PANS
Footboard Support Bracket and Passenger Footboards. Replace the factory black painted passenger footboard with
50501114 Black. the custom look of smooth chrome. The kit includes left-
50501113 Chrome. and right-hand traditional D-shaped footboard pans, ready
to install with your Original Equipment hardware. Footboard
D. PASSENGER FOOTBOARD SUPPORT KIT inserts and footboard supports sold separately.
Add the comfort and convenience of passenger footboard to 50752-04 Chrome.
your motorcycle. These brackets and supports are designed Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
to allow installation of Passenger Footboards (sold separately). FXFBS) and ’86-later Touring and Trike models equipped
Brackets and Supports are sold separately. with passenger footboard supports.
50501118 Black. 50501799 Gloss Black.
Fits ’18-later FLDE, FLHC, FLHCS and FLSB models. Requires Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
separate purchase of Passenger Footboard Supports and B. PASSENGER FOOTPEG MOUNTING KIT – FXDR 114 F. PASSENGER FOOTBOARD PAN KIT – F. PASSENGER FOOTBOARD PAN KIT – FXFBS) and ’86-later Touring and Trike models equipped
GLOSS BLACK, CLASSIC STYLE GLOSS BLACK, CONTEMPORARY STYLE
SOFTAIL
Passenger Footboards. with passenger footboard supports.
50501117 Black.
Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXBR, H. HALF-MOON PASSENGER FOOTBOARD
FXBRS, FXLR, FXLRS, FXLRST and FXST models. Requires PANS AND INSERTS
separate purchase of Passenger Footboard Supports and Styled to match the Half-Moon Rider Footboards, these clas-
Passenger Footboards. sic passenger footboards add both style and comfort to your
nostalgic ride. Available in mirror-finish chrome or gloss black
finish, the kit includes left and right footboard pan and vibra-
tion-isolation footboard inserts. Model-specific footboard
mounts are sold separately.
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
FXFBS) and ’86-later Touring models equipped with passen-
ger footboard supports. Does not fit Trike models.
50807-08 Chrome.
50810-08 Gloss Black.
D. PASSENGER FOOTBOARD SUPPORT KIT D. PASSENGER FOOTBOARD SUPPORT KIT H. HALF-MOON PASSENGER FOOTBOARD I. SWEPT WING PASSENGER FOOTBOARD
(50501118 SHOWN) (50501117 SHOWN) PANS – GLOSS BLACK PANS – CHROME GROOVED
138 CRUISER CRUISER 139
Engine Guards Chassis Trim – Front End
A. FLAT-OUT BAR* F. LOWER FORK SLIDERS – CHROME
Get tip-over protection with sleek West Coast style. The Flat- Competitively priced, these chrome-plated Lower Fork
Out Bar provides limited cosmetic vehicle protection to the Sliders give your bike upfront style. To ensure proper fitment
front of the motorcycle in a low-speed tip-over event. and function, these sliders are manufactured from Original
Equipment components. Form follows function, with polished,
Fits ’18-later Softail® models (except FXDRS) ’22-later FXLRST chrome-plating and a stamped Harley-Davidson logo for prod-
requires separate purchase of Flat-Out Bar Adapter Kit P/N uct identification. A perfect addition during the installation of
47200927. Profile® Low Front suspension components, this kit includes
49000232 Chrome. right and left sliders, bottom axle retainer, axle retainer bolts
49000231 Gloss Black. and oil seals.
45500400
B. FLAT-OUT BAR ADAPTER KIT Fits ’18-later FLDE, FLHC, FLHCS and FLSL models.
Replaces the stock fairing support to enable installation of 45500406
Flat-Out Bar or Traditional and Mustache engine guards. Fits ’18-later FXLR models. Does not fit FXLRS and FXLRST
47200927 models.
Fits ’22-later FXLRST models. A. FLAT OUT BAR – CHROME B. FLAT OUT BAR ADAPTER KIT 45500401
Fits ’18-later FXBB,FXBBS and FXST models.
C. MUSTACHE ENGINE GUARD* 45500402
Combine classic shape and modern function for a unique twist Fits ’18-later FLFB and FLFBS models.
on engine protection. The flow of this engine guard comple-
ments the bike’s traditional style while the gracefully curved
G. LOWER FORK SLIDERS – GLOSS BLACK
upper section incorporates highway pegs into the shape. The
These gloss black coated sliders are the ultimate extension
integrated rubber pads offer a comfortable and slip-resistant
of your bike’s dark side and make a perfect custom addition
cushion for your feet while traveling the open road. One-piece F. LOWER FORK SLIDERS – CHROME (45500400 SHOWN) to your blacked-out Softail® model. Manufactured to Original
engine guard kit includes all required mounting hardware.
Equipment specifications, the durable black coating is a
Fits ’18-later Softail® models (except FXDRS). Does not fit with great match to other H-D® black components. A perfect addi-
Extended Reach Forward Control Kits. tion during the installation of Profile® Low Front suspension
components, this includes right and left sliders, bottom axle
49000140 Chrome.
retainers, drain screws, axle retainer bolts and oil seals.
49000141 Gloss Black.
45500403
Fits ’18-later FLDE, FLHC, FLHCS and FLSL models.
D. ENGINE GUARD KIT*
Protect your bike without sacrificing ground clearance or style. 45500404
The one-piece Engine Guard is designed to complement the Fits ’18-later FLFB and FLFBS models.
lines of the motorcycle and the available chrome or gloss 45500405
black finish adds the perfect finishing touch. Fits ’18-later FXLR models. Does not fit FXLRS and FXLRST
models.
Fits ’18-later Softail models (except FXDRS) Does not fit with
Extended Reach Forward Control Kits. H. BRAKE CALIPER KIT – FRONT, SINGLE DISC
49000138 Chrome. C. MUSTACHE ENGINE GUARD – CHROME C. MUSTACHE ENGINE GUARD – GLOSS BLACK Manufactured from Original Equipment components for
proven performance, these calipers will add a stylish touch to
SOFTAIL
49000139 Gloss Black.
the stock bike or add the perfect finish to a complete custom
E. SOFT LOWERS equipped with chrome or blacked-out wheels, rotors and fork
Extend your riding season. Full-coverage Soft Lowers provide sliders.
wind and mud protection for the rider’s legs and boots and Fits ’15-later Softail models (except FXDRS, FXFB, FXFBS
minimize cold updrafts as the weather changes. Covers are FXLRS, FXLRST and FXSE). Kit includes brake pads.
custom shaped to hug the engine guard to minimize flap-
ping and they simply clip in place for speedy installation as 41300148 Chrome.
the weather changes. Two-way zippered outer edge accom- 41300152 Red.
modates guard mounted highway pegs in almost any position.
Reflective piping provides added visibility.
57100366
Fits ’18-later Softail models (except FXDRS) equipped with
Engine Guard Kit P/Ns 49000138 or 49000139. Does not fit
with Mustache Engine Guards or Extended Reach Forward
Controls. G. LOWER FORK SLIDERS – GLOSS BLACK (45500403 SHOWN)
E. SOFT LOWERS H. FRONT BRAKE CALIPER KIT – CHROME H. FRONT BRAKE CALIPER KIT – RED
(SHOWN WITH CLASSIC CHROME CALIPER
INSERT)
140 CRUISER CRUISER 141
Chassis Trim – Front End Chassis Trim – Front End
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD G. COIL COVER
FOSGATE® – INNER FAIRING AUDIO KIT Create a custom look in minutes. Dressed in classic chrome
A high-performance motorcycle deserves high-output or rich, gloss black, these coil covers make it easy for you to
audio. This kit was designed alongside the Low Rider® ST for complete your chromed- or blacked-out look and feature a
outstanding performance and an ideal fit within the fairing. A Bar & Shield emboss in contrasting gloss black on the chrome
powerful, intelligent amplifier with digital signal processing cover or chrome on the gloss black cover, creating a unique
(DSP) technology developed jointly by Harley-Davidson and look. To install, simply remove the OE screw, add the cover and
Rockford Fosgate® is engineered to perform in the demanding the included screw and one of the most visible parts of your
motorcycle environment. Connects to your mobile device via bike is now customized. Includes all necessary hardware.
Bluetooth to play stored or streaming audio through a pair of
built-in two-way speakers. Fits ’18-later Softail® models.
- Marine grade two-way speakers include a pair of 5.25” woof- 57300214 Chrome.
ers and two remote tweeters aimed at the rider’s ears for great 57300213 Gloss Black.
audio performance 57300289 Machine Cut.
- Lightweight design has minimal impact vehicle dynamics and
performance H. GAUGE BEZELS – DEFIANCE COLLECTION
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD FOSGATE® – G. COIL COVER – CHROME G. COIL COVER – GLOSS BLACK
- Plug-and play installation. One assembly includes the ampli- The perfect finishing touch. Defiance Collection Gauge
INNER FAIRING AUDIO KIT
fier, speakers and housing, which replaces the original equip- Bezels add a custom detail to the place you constantly look
ment inner fairing. – your instrument cluster. Accented with deep grooves, these
- Two simple wiring connections power the unit machined aluminum rings cover the factory gauge surround
- Uses Bluetooth 4.2 for a strong wireless connection to most adding texture and visual interest to the dash. Available in
devices with minimal compression for outstanding sound black anodized finish, these self-adhesive rings are easy to
quality install.
- Connectivity with the Harley-Davidson® Audio powered by 61400440 5" Tank Gauge – Black Anodized.
Rockford Fosgate® mobile app offers unique features like Fits ’18-later FLDE, FLHC, FLHCS, and FLSL models.
Automatic Volume Control (AVC), adjustable 7-Band EQ, and
61400437 4" Tank Gauge – Black Anodized.
step by step system configurator.
Fits ’99-later XL (except XL1200X, XL1200CX, and
- Compact amplifier mounts within the fairing. 250 watts of XL1200XS), ’11-’13 FXS, ’13-’17 FXSB, ’13-’14 FXSBSE, ’98-’13
amplifier power (125 x 2 @ 4ohms / 125 x 2 @ 2ohms) for crisp, Road Glide®, ’14-’17 FXDL, and ’18-later FXFB, FXFBS, FXLR,
clear sound quality at any volume. Overcomes bike, environ- and FXLRS models.
ment, and helmet sound-limiting variables at all speeds
76200037 I. HEADLAMP TRIM RING – GLOSS BLACK
Fits ’22-later FXLRST models. Finish the sinister look by replacing the Original Equipment
chrome headlamp trim ring with sinister black. Easy to install,
B. FAT BOY® NACELLE KIT the ring’s rich black surface matches the stock headlamp shell
Take your Fat Boy® model in a new styling direction. finish for a unified look.
Manufactured from Original Equipment components for a 61400573 7" Headlamp.
perfect fit, these Nacelle Kits are a direct replacement for Fits ’18-later FLDE, FLHC, FLHCS, FLSB and FLSL models.
the stock satin chrome nacelle. Available in gloss black finish,
these kits are just the start on your journey to build a one-of-a- B. FAT BOY NACELLE KIT – GLOSS BLACK C. FAT BOY NACELLE HEADLAMP BEZEL – G. COIL COVER – BLACK MACHINE CUT G. COIL COVER – BLACK MACHINE CUT
J. CONSOLE KIT – CHROME
kind custom ride. Add matching lower fork sliders, upper fork (SHOWN WITH BLACK HEADLAMP BEZEL) GLOSS BLACK
SOFTAIL
Dress up your ride. Designed in the style of the Fat Boy®
slider covers and axle nut covers to complete the conversion. model’s console with perforated tank strap, this mirror
The 3-piece kit includes nacelle housing and two back panels. chrome-finished Console Kit includes the major compo-
Black Headlamp Bezel P/N 61400509 is sold separately. nents required to change the black or satin chrome console
61300811 Gloss Black. to a bright custom look. Easy to install, this Chrome Console
Fits ’18-later FLFB and FLFBS models. Kit instantly transforms the view over the tank. Manufactured
from Original Equipment components for superior fit and
C. FAT BOY NACELLE HEADLAMP BEZEL – GLOSS BLACK finish, the kit includes polished chrome instrument console,
Complete the transition to the dark side. This gloss black tank strap, console insert and installation hardware.
Headlamp Bezel replaces the Original Equipment chrome 70900816
bezel, and is the perfect match for the Fat Boy Nacelle Kit P/N Fits ’18-later FLFB, FLFBS, and FLSB models.
61300811.
61400509 K. CONSOLE KIT – GLOSS BLACK
Fits ’18-later FLFB and FLFBS models. Lead the way to the dark side. This blacked-out Console
Kit includes the major components required to change the
D. UPPER FORK SLIDER COVERS – CHROME chrome or satin chrome console to a dark custom look. Easy
When used with H-D® Genuine Motor Accessory Chrome to install, this Black Console Kit instantly transforms the view
Lower Fork Sliders, you’ve got a front end that’s completely over the tank. Manufactured from Original Equipment compo-
chromed and an appearance that’s utterly impressive. Kit nents for superior fit and finish, the kit includes black instru-
includes left and right cover. ment console, tank strap, console insert and installation
45800133 Chrome. hardware.
Fits ’18-later FLFB and FLFBS models. 70900817
D. UPPER FORK SLIDER COVERS – CHROME E. UPPER FORK SLIDER COVERS – H. DEFIANCE GAUGE TRIM – BLACK ANODIZED I. HEADLAMP TRIM RING – Fits ’18-later FLFB, FLFBS, and FLSB models.
E. UPPER FORK SLIDER COVERS – GLOSS BLACK GLOSS BLACK 7" GLOSS BLACK
When combined with matching Lower Fork Sliders, these
Gloss Black Upper Fork Slider Covers complete the blacked-
out transformation. Manufactured from Original Equipment
components for superior fit, the black finish matches the
available black fork sliders and nacelle kit for a unified look.
Kit includes left and right cover.
45800134 Gloss Black.
Fits ’18-later FLFB and FLFBS models.
SOFTAIL
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08-’17 FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB,
Dyna, ’07-later Softail (except Springer, FLSTNSE, FXCW, FLFBS, FLSB, FXBR, FXBRS and FXDRS ).
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and
41706-09A Chrome.
’08-later Touring and Trike models. ’18-later FLDE, FLFB,
FLFBS, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXBR, FXBRS,
FXLR and FXST models require separate purchase of Front
F. REAR AXLE NUT COVERS – H-D MOTOR CO. LOGO
Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW,
Axle Adapter Kit P/N 43000090. ’19-’20 FXDRS, ’18-later
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB,
FLSB, FXFB and FXFBS and ’20-later FXLRS and FXLRST
FLFBS, FLSB, FXBR, FXBRS and FXDRS).
models require separate purchase of Front Axle Adapter Kit
P/N 43000159. 41704-09 Chrome.
7. 43000096 Black. 6 43000178 Gloss Black.
5
8. 43163-08A Chrome.
Brass Collection
9. 43000046 E. REAR AXLE NUT COVERS – CHROME E. REAR AXLE NUT COVERS – GLOSS BLACK
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-’20 XG,
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08-
’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB,
FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE,
FXSE, FXST-Aus, and FXSTD) and ’08-later Touring and Trike
models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL,
FXBB, FXBBS, FXBR, FXBRS, FXLR and FXST models require
separate purchase of Front Axle Adapter Kit P/N 43000090.
’19-’20 FXDRS, ’18-later FLSB, FXFB and FXFBS and ’20-later 8
FXLRS and FXLRST models require separate purchase of 7
Front Axle Adapter Kit P/N 43000159.
D. FRONT AXLE NUT COVERS F. REAR AXLE NUT COVERS – F. REAR AXLE NUT COVERS –
H-D MOTOR CO. LOGO, CHROME H-D MOTOR CO. LOGO, GLOSS BLACK
144 CRUISER CRUISER 145
Chassis Trim – Rear End Tank Trim
A. REAR FENDER SUPPORTS D. FLUSH-MOUNT FUEL CAP AND LEFT SIDE TANK
Make a bold statement on the rear of your bike by swapping CAP KIT
out the stock Fender Supports for these chrome or black Emphasize the long and lean look of the fuel tank. This Flush-
versions. Manufactured from Original Equipment compo- Mount Fuel Cap and Left Side Tank Cap Kit offers a pop-up
nents to ensure superior fit and finish, these Fender Supports filler design that when installed and sealed looks identical to
continue your styling direction to the back of the bike. These the flush mount cap. A simple push and the fuel filler cap pops
Fender Supports are the ideal finishing touch and the perfect up to provide ample grip, even while wearing gloves. The Left
complement to available gloss black or chrome passenger Side Tank Cap is a decorative piece that replaces the Original
sissy bars and luggage racks. Equipment trim. The complete kit includes fuel cap, left side
59500769 Chrome. tank cap and two trim rings.
Fits ’18-later FLHC and FLHCS models. Fits ’18-’21 FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL,
59500770 Gloss Black. FXLR and FXLRS models.
Fits ’18-later FLDE, FLHC and FLHCS models.
61100131 Chrome.
59500766 Gloss Black.
61100132 Gloss Black.
Fits ’18-later FLFB and FLFBS models.
59500767 Gloss Black. D. FLUSH-MOUNT FUEL CAP AND LEFT SIDE TANK CAP – CHROME
E. FLUSH-MOUNT FUEL CAP
Fits ’18-later FXLR and FXLRS models. Emphasize the long and lean look of the fuel tank. This Flush-
59500771 Gloss Black. Mount Fuel Cap Kit offers a pop-up filler design that replaces
Fits ’18-’21 FLSB models. the Original Equipment twist-on fuel cap. A simple push and
the fuel filler cap pops up to provide ample grip, even while
B. THE BRASS COLLECTION REAR AXLE NUT COVERS wearing gloves. Easy to install, the cap assembly screws into
Artistically manufactured from solid brass, these compo- position and the self-adhesive decorative ring finishes the look.
nents feature a natural antique finish that will age and patina Complete kit includes pop-up cap and matching trim ring.
when exposed to the elements. Brass Collection Rear Axle Nut A. REAR FENDER SUPPORTS – CHROME
Covers complement the matching Front Axle Nut covers. Easy- Fits ’18-later FXBB, FXBBS, FXBR, FXBRS and FXST models..
to-install kits include all necessary mounting hardware. Sold 61100133 Chrome.
in pairs. 61100134 Gloss Black.
43000050
Fits ’18-later FXFB and FXFBS models.
Fits ’08-’17 Dyna® and ’08-later Softail® models (except
FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later 61100136 Gloss Black.
FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).
Fits ’20 FXDRS models.
C. THE BRASS COLLECTION SWINGARM PIVOT BOLT 61100158 Gloss Black.
COVERS
Styled to complement the complete Brass Collection, these F. CUSTOM FUEL CAPS AND TANK TRIM
easy to install components hide the swingarm pivot bolt is Add a custom touch to your tank. Styled to reflect your atti-
classic style. Manufactured from solid brass, these heritage- tude, these elegantly constructed fuel caps are the perfect
finished covers feature a natural antique finish that will age match for your ride. The Right Side Fuel Cap is easy to install
and patina when exposed to the elements. Kit includes mount- and features a ratcheting design to ensure that the design
ing hardware. D. FLUSH-MOUNT FUEL CAP AND LEFT SIDE TANK CAP – GLOSS BLACK
faces the correct direction. And the Left Side Decorative Fuel
SOFTAIL
61400346 Pair. Tank Caps mirror the fuel cap design for a symmetrical view
Fits ’08-’17 Softail models (except FXCW, FXCWC, FXSB, over the tank.
FXSBSE, FXSE and FXST-Aus. and models equipped with
Passenger Footboard Kits). Right Side Fuel Caps
Fits ’92-later XL, ’92-’17 Dyna® (except ’04-later FXD and
61400344 Left Side Only.
FXDX, ’05-’06 FXDC and ’07 FXDSE), ’00-later Softail®,
Fits ’14-later XL and ’18-later Softail models. Does not fit with
(except ’18-later FXFB and FXFBS, FXSTD and ’07-’08
Passenger Footpeg Support Kit P/N 50500769 or 50500771
FXSTSSE), ’94-later Road King® and ’15-later Freewheeler®
on ’18-later Softail models.
models. Does not fit models equipped with Original Equipment
locking or tethered fuel caps. Use on ’13-’14 FXSBSE requires
removal of stock flush mount trim ring..
61100180 Machine Cut.
61100107A Dominion™ Gloss Black.
61100106 Dominion Bronze.
A. REAR FENDER SUPPORTS – GLOSS BLACK 61100093B Gloss Black.
61100076 Brass Collection.
61100126A Diamond Black.
61100103A Black Skull.
61100125A Chrome Skull.
B. REAR AXLE NUT COVERS – BRASS C. SWINGARM PIVOT BOLT COVERS – F. CUSTOM FUEL CAP AND TANK TRIM – F. CUSTOM FUEL CAP AND TANK TRIM –
COLLECTION BRASS COLLECTION BLACK SKULL CHROME SKULL
146 CRUISER CRUISER 147
Windshields – FX Softail® & Springer™ 19" 19" 23" Windshields – FL Softail®
A. QUICK-RELEASE COMPACT WINDSHIELD 16" D. KING-SIZE H-D® DETACHABLES™ WINDSHIELD FOR
21"
Combine the classic Harley-Davidson® windshield shape with FL SOFTAIL® MODELS – POLISHED BRACES
a revolutionary attachment system and you have the best of Styled to complement the beefy FL Softail® front headlamp,
style and function. this windshield can be installed or removed in seconds with-
out tools, keeping your bike ready for the open road or for a
Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-’20 18"
run down Main Street. The windshield is formed from hard-
FXBR and FXBRS models. coated polycarbonate to resist scratching and abrasion and is
58387-06 18" Clear – Polished Braces. available with traditional polished braces and mounting brack-
Windshield dimensions: Overall height – 26.8"; width – 19.5". ets to blend with your customizing style. Mounting brackets
58444-06 14" Light Smoke – Polished Braces. are supported by molded-rubber bushings for improved isola-
Windshield dimensions: Overall height – 22.8"; width – 19.5". tion. Windshield kit includes all the hardware.
Fits ’93-’05 FXDWG and ’86-’15 FXST, FXSTB and FXSTC Fits ’86-’99 FLSTC, ’90-’17 FLS, FLSS, FLSTF, FLSTFB and
models. FLSTFBS, ’06 FLST and ’93-’96 FLSTN models without auxil-
iary lamps. Does not fit Springer™ models.
59802-05 19" Clear – Polished Braces.
Windshield dimensions: Overall height – 23.8"; width – 21.4". 58243-95 21" Clear – Polished Braces.
57199-05 16" Light Smoke – Polished Braces. Windshield dimensions: Overall height – 26.3"; width – 23.1".
Windshield dimensions: Overall height – 20.8"; width – 21.4". 58278-95 18" Light Smoke – Polished Braces.
Windshield dimensions: Overall height – 23.4"; width – 23.1".
Also available:
Fits ’00-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
FRONT TURN SIGNAL RELOCATION KIT
FLSTFBS models equipped with auxiliary lighting. Does not
58742-05 fit with Custom Auxiliary Lighting Kit P/N 68000051. Includes
Fits ’93-’05 FXDWG, ’86-’15 FXST, FXSTB and FXSTC and mounting hardware.
’00-’07 FXSTD models. A. QUICK-RELEASE COMPACT WINDSHIELD – A. QUICK-RELEASE COMPACT WINDSHIELD – 57400114 23" Clear – Polished Braces.
POLISHED BRACES GLOSS BLACK BRACES Windshield dimensions: Overall height – 28.3"; width – 23.1".
B. QUICK-RELEASE SUPER SPORT WINDSHIELD (SHOWN WITH TURN SIGNAL RELOCATION KIT)
Reduces the pounding wind and shower of bugs, but keeps the 57400112 21" Clear – Polished Braces.
wind-in-the-hair feeling. Windshield dimensions: Overall height – 26.3"; width – 23.1".
57301-06 . 57400115 18" Clear – Polished Braces.
Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-’20 Windshield dimensions: Overall height – 23.4"; width – 23.1".
FXBR and FXBRS models. Windshield dimensions: Overall Fits ’00-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
height – 25.0"; width – 20.1". FLSTFBS models equipped with auxiliary lighting. ’00-’17 FLS,
FLSS, FLST, FLSTF, FLSTFB and FLSTFBS models require
C. H-D® DETACHABLES™ SUPER SPORT WINDSHIELD separate purchase of Docking Hardware Kit P/N 91800025.
The windshield mounts to the fork tubes with H-D® Does not fit with Custom Auxiliary Lighting Kit P/N 68000051.
Detachables™ Docking Hardware (sold separately) for easy
57061-09 18" Clear – Polished Braces.
on-and-off convenience and a quick return to a sporting profile.
Windshield dimensions: Overall height – 23.4"; width – 23.1".
57965-97A 18" Light Smoke.
Fits ’93-’05 FXDWG, ’80-’86 FXWG and ’84-’15 FXST, FXSTB Fits ’86-’99 FLSTC, ’90-’99 FLSTF and FLSTFB and ’93-’96
and FXSTC models. Use Docking Hardware Kit D. KING-SIZE H-D DETACHABLES WINDSHIELD FOR FL SOFTAIL MODELS – POLISHED BRACES FLSTN models with auxiliary lighting. Includes mounting hard-
SOFTAIL
P/N 58350-96. Windshield dimensions: Overall height – ware. Does not fit Springer models.
22.3"; width – 17.8". 58240-95 21" Clear – Polished Braces.
Windshield dimensions: Overall height – 26.3"; width – 23.1".
Shown with:
DOCKING HARDWARE FOR H-D DETACHABLES 21" E. KING-SIZE H-D DETACHABLES WINDSHIELD FOR FL
WINDSHIELDS SOFTAIL MODELS – BLACK BRACES
58907-96B Springer™ – Polished. Designed to be installed or removed without tools in seconds,
Required for installation of H-D Detachables Windshields on a detachable windshield gives you the freedom to define your
and ’93-’09 FXSTS, FXSTSB and ’09 FXSTSSE, ’97-’11 FLSTS, 18" ride at the drop of a hat. Ride across the country protected
FLSTSB and FLSTSC models. from the elements, then quickly remove the windshield to
58350-96 For 41mm Forks. hit the streets in style. This one-piece windshield is formed
Required for installation of H-D Detachables Windshields on from hard-coated polycarbonate material to resist scratching.
’93-’05 FXDWG, ’80-’86 FXWG and ’84-’15 FXST, FXSTB and The shield is attached to stainless steel mounting brackets
FXSTC models. supported by molded-rubber bushings for improved isola-
tion. Windshields are available with contemporary gloss black
58397-00 For Softail® Deuce™. B. QUICK-RELEASE SUPER SPORT WINDSHIELD C. H-D DETACHABLES SUPER SPORT braces and mounting brackets and in a variety of heights to
Required for installation of H-D Detachables Windshields on WINDSHIELD match your size and riding style.
’00-’07 FXSTD models. Does not fit FXSTDSE models.
Fits ’00-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
D. H-D DETACHABLES COMPACT WINDSHIELD FOR FLSTFBS models equipped with auxiliary lighting. Does not
SOFTAIL® SPRINGER™ MODELS fit with Custom Auxiliary Lighting Kit P/N 68000051. Includes
mounting hardware.
Fits ’97-’03 FLSTS, ’05-’07 FLSTSC and ’93-’09 FXSTS,
FXSTSB and ’09 FXSTSSE models. Installation requires the 57400110 21" Clear – Black Braces.
separate purchase of Windshield Docking Hardware Kit Windshield dimensions: Overall height – 26.3"; width – 23.1".
P/N 58907-96B (chrome) or 58165-09 (black). (Will fit with or 57400111 18" Light Smoke – Black Braces.
without auxiliary lighting.) Will not fit with Chrome Billet Mini Windshield dimensions: Overall height – 23.4"; width – 23.1".
Tach Mounts.
Fits ’86-’99 FLSTC, ’90-’17 FLS, FLSS, FLSTF, FLSTFB and
58770-96 18" Clear – Polished Braces. FLSTFBS, ’06 FLST and ’93-’96 FLSTN models without auxil-
Windshield dimensions: Overall height – 26.8"; width – 19.9". iary lamps. Does not fit Springer models.
Fits ’08-’11 FLSTSB models. Installation requires separate 57688-10 21" Clear – Black Braces.
purchase of Windshield Docking Hardware Kit P/N 58907-96B Windshield dimensions: Overall height – 26.3"; width – 23.1".
(chrome) or 58165-09 (black).
58073-09 15" Clear – Black Braces.
Windshield dimensions: Overall height – 26.8"; width – 19.7".
Shown with:
DOCKING HARDWARE FOR H-D DETACHABLES
WINDSHIELDS
Required for installation of H-D Detachables Windshields
on ’97-’11 FLSTS, FLSTSB and FLSTSC and ’93-’09 FXSTS,
FXSTSB and ’09 FXSTSSE models.
58907-96B Springer™ – Polished.
58165-09 Springer – Black.
D. H-D DETACHABLES COMPACT WINDSHIELD – D. H-D DETACHABLES COMPACT WINDSHIELD – E. KING-SIZE H-D DETACHABLES WINDSHIELD FOR FL SOFTAIL MODELS – BLACK BRACES
POLISHED BRACES GLOSS BLACK BRACES
148 CRUISER 21" CRUISER 149
Windshields – FL Softail® Windshield Accessories
18"
A. KING-SIZE NOSTALGIC H-D® DETACHABLES™ E. FORK-MOUNT WIND DEFLECTORS – CHROME
WINDSHIELD FOR FL SOFTAIL® MODELS Dress your bike for comfort and style. Wind Deflectors extend
Formed from hard-coated polycarbonate to resist scratch- the windshield’s coverage for superior protection in any
ing, this one-piece windshield features a nostalgic horseshoe- weather. The scooped Deflectors are shaped to channel the
shaped outer brace with stylized Bar & Shield logo. The highly airflow and direct the rush of air and turbulence around the
polished mounting brackets attach easily with the included rider. Deflectors attach to the fork brackets for a clean, inte-
mounting hardware and after initial installation, the windshield grated look and the chrome finish is the perfect complement
can be removed and re-attached without tools in seconds. to polished or chrome front end components. Easy-to-install
H-D® Detachables™ Windshields are available in 21" and 18" kit includes all required mounting hardware.
versions to match your need for wind protection. 57400143
Fits ’05-’17 FLS, FLSS and FLSTN, ’86-’17 FLSTC, ’00-’17 FLSTF, Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
FLSTFB, FLSTFBS, and ’06 FLST models with or without auxil- FLSTFBS, ’93-’96 FLSTN and ’10-’12 FLSTSE models
iary lamps. Does not fit with Custom Auxiliary Lighting Kit equipped with Harley-Davidson® King-Size Windshield and/
P/N 68000051. Additional mounting hardware not required. or Passing Lamp Kits. Does not fit Springer™ models.
57140-05 21" Clear. F. REPLACEMENT WINDSHIELD SCREEN
Windshield dimensions: Overall height – 26.3"; width – 23.1". Tailor your existing windshield for your riding preference.
57141-05 18" Light Smoke. Replace the original windshield with a screen sized to improve
Windshield dimensions: Overall height – 23.4"; width – 23.1". wind protection. Uses your existing mounting brackets and
hardware for an easy, economical conversion.
B. KING-SIZE H-D DETACHABLES WINDSHIELD FOR
NACELLE-EQUIPPED MODELS WITHOUT AUXILIARY Fits ’86-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS,
LIGHTING ’06 FLST and ’93-’96 FLSTN equipped with a H-D™
This one-piece polycarbonate windshield is designed with a Detachables™ King-Size Windshield. Does not fit Springer
A. KING-SIZE NOSTALGIC H-D DETACHABLES WINDSHIELD FOR FL SOFTAIL MODELS E. FORK-MOUNT WIND DEFLECTORS – CHROME models.
larger diameter opening to wrap around the contour of the
Freight Train Headlamp Nacelle Kit. Full length windshield will 57754-04 23" Clear.
not fit with Original Equipment or accessory Auxiliary Lamp 57975-99 21" Light Smoke.
Kits.
58277-95 18" Light Smoke.
Fits ’86-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, 19"
Fits ’86-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS,
’06 FLST and ’93-’96 FLSTN models equipped with the Freight 23" ’06 FLST and ’93-’96 FLSTN models equipped with the
Train Headlamp Nacelle Kit. Does not fit models equipped with Chrome Headlamp Nacelle Kit P/N 67907-96B.
Auxiliary Lamp Kits. 16" 21"
58657-97A 19" Clear.
58652-97A 19" Clear.
Windshield dimensions: Overall height – 26.3"; width – 23.1". 18"
G. WINDSHIELD ACORN NUT KIT
58653-97A 16" Light Smoke. Kit contains 10 chrome-plated low crown 12-24 acorn nuts.
Windshield dimensions: Overall height – 23.4"; width – 23.1".
94111-95
Also available: Fits Compact, King-Size, Convertible and Road King®
KING-SIZE H-D DETACHABLES WINDSHIELD FOR windshields. (Pkg. of 10.)
NACELLE-EQUIPPED MODELS WITH AUXILIARY
SOFTAIL
LIGHTING H. MID-FRAME AIR DEFLECTOR
This one-piece polycarbonate windshield is designed with a Improve rider comfort during the summer riding season.
larger diameter opening to wrap around the contour of the Designed for severe duty and extreme temperature appli-
Freight Train Headlamp Nacelle Kit. Windshield is shaped to cations, these inconspicuous black deflectors attach to the
accept Original Equipment or accessory Auxiliary Lamp Kits. frame and surround the top of the rear cylinder head. The
scoop shape captures the moving air and uses the flow to
Fits ’86-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, direct the heat down and away from the rider to improve
’06 FLST and ’93-’96 FLSTN models equipped with the Freight comfort. Kit includes all required mounting hardware.
Train Headlamp Nacelle Kit and Auxiliary Lamps. 29200008A
58649-97A 19" Clear. Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB,
Windshield dimensions: Overall height – 26.3"; width – 23.1". FXSBSE and FXSE).
C. WIND SPLITTER VENTED WINDSHIELD D. KING-SIZE H-D DETACHABLES WINDSHIELD H. MID-FRAME AIR DEFLECTOR H. MID-FRAME AIR DEFLECTOR
FOR HERITAGE SPRINGER MODELS – 18" CLEAR
150 CRUISER CRUISER 151
Seating – Reach® & Tallboy® Seating – Sundowner™
SOFTAIL
51470-06A G. SUNDOWNER SEAT – BLACKLINE™ & SOFTAIL SLIM®
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB and ’06-’15 MODELS
FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. The smooth vinyl cover features elegant top-stitching to
Does not fit FLSTSE models. FLSTSB models require complement most Harley-Davidson® saddlebags and luggage.
separate purchase of Passenger Footpeg Mounting Kit
P/N 50932-08 and passenger footpegs. Seat width 13.5"; 52000011
passenger pillion width 10.0". Fits ’11-’17 FLS, FLSS and ’11-’13 FXS models. Installation
requires separate purchase of Passenger Footpeg Mounting
D. TALLBOY® SEAT Kit P/N 50932-08 and passenger footpegs. Seat width 15.5";
The correct riding position can help a tall rider sit comfortably passenger pillion width 12.0".
on the bike and avoid leg cramps and back strain during a long
day in the saddle. For riders with a longer inseam, a Tallboy® H. SUNDOWNER SOLO SEAT – FXSB SOFTAIL®
Seat will put you on the road to fatigue-free riding. Designed This Sundowner Solo Seat is styled to match the Softail
to move the rider up and back from the stock seating position, Breakout® model’s Original Equipment seat and features a
a Tallboy Seat can eliminate the knees-high riding position and textured vinyl inlay and Harley-Davidson® medallion insert.
effectively places the body for a natural arm and leg reach to For a two-up ride, combine the solo seat with the match-
the controls. Tallboy Seats feature a bucket-shaped design ing Sundowner Passenger Pillion P/N 52400066 (sold
for added support and a wide seating surface to reduce pres- separately).
sure on the tailbone. This Tallboy Seat moves the rider back 52000098
2.0" and up 3.0" as compared to the Original Equipment seat. Fits ’13-’17 FXSB, FXSBSE and ’16-’17 FXSE models. Seat
The new position allows additional leg and arm movement for width 16.0".
the long-limbed rider and a comfortable seating space for the
open road. The Tallboy Seat features a smooth vinyl surface Shown with:
C. REACH SEAT G. SUNDOWNER SEAT – BLACKLINE & SLIM
that complements many motorcycle models and a wide pillion SUNDOWNER PASSENGER PILLION – FXSB SOFTAIL
for added passenger comfort. Bring a passenger along for the ride. This easy-to-install
51469-06A detachable Passenger Pillion is styled to complement the
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, and ’06-’15 Sundowner Solo Seat P/N 52000098. Includes grab strap.
FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. 52400066
Does not fit FLSTSE models. FLSTSB models require Fits ’13-’17 FXSB, FXSBSE and FXSE models equipped with
separate purchase of Passenger Footpeg Mounting Kit Sundowner Solo Seat P/N 52000098 (does not fit with
P/N 50932-08 and passenger footpegs. Seat width 16.5"; original equipment solo seats). Pillion width 12".
pillion width 12.5".
Also available:
SUNDOWNER SEAT – SOFTAIL® DEUCE™
This Sundowner Seat gives you added touring comfort without
sacrificing the Deuce™ style that has heads turning. Styled to
match the Softail Deuce model with an embroidered H-D logo.
51112-00B
Reach Seats
Fits ’00-’07 FXSTD models. Seat width 14.0"; passenger
pillion width 11.0".
Tallboy Seats
D. BADLANDER SEAT
Clean smooth covers, subtle top-stitching and a frame-
hugging profile add up to a statement only Harley could create.
The low design delivers a reduced seat height that is ideal for
SOFTAIL
riders who want the shortest possible reach to the ground,
and the long and lean shape allows tall riders to move back
from the hand and foot controls without sitting higher on the
bike. Kit includes grab strap and all mounting hardware.
51397-06A
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS and FLSTSB, ’06-’15
FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models.
Does not fit FLSTSE models. FLSTSB models require
separate purchase of Passenger Footpeg Mounting Kit
P/N 50932-08 and passenger footpegs. Seat width 12.0";
passenger pillion width 6.5".
52292-00A
Fits ’00-’17 FLST, FLSTC, FLSTNSE, FLSTSC, ’00-’06 FLSTF
and ’00-’05 FX Softail® models (except FXSTD). Also fits
A. SIGNATURE SERIES SEAT WITH RIDER BACKREST – FLSTC STYLING C. LEATHER BADLANDER SEAT FLSTN models with removal of stock luggage rack. Seat
features embroidered Harley-Davidson script logo. Seat
width 12.0"; passenger pillion width 6.5".
52292-94B
Fits ’84-’99 Softail models (except FLSTS). Seat features
embroidered Harley-Davidson script logo. Seat width 12.0";
passenger pillion width 6.5".
Also available:
SPRING SADDLE INSTALLATION KIT
The torsion-style springs are designed for the optimum
balance between spring suspension and support. Required
for installation of Solo Saddle Kit P/N 52000277, 52000279,
52000278, 52000275, 52000276, 52000180, 54072-10,
A. TOURING PASSENGER PILLION – SOFTAIL DELUXE STYLING
54373-10, 52000114 and 52000113. Kit includes springs,
SOFTAIL
mounting brackets, frame cover and hardware.
54376-10B
Fits ’08-’17 FLSTC and FLSTN models.
Also available:
SOLO SEAT BRACKET/SPRING KIT
This kit is required to install Touring Solo Saddle P/N 51481-08,
Deluxe Leather Solo Saddle P/N 52006-47B or Leather Solo
Saddle P/N 52004-25.
51902-09
Fits ’08-’15 FLSTSB, FXST, FXSTB and FXSTC models.
B. PASSENGER PILLION – SOFTAIL SLIM STYLING E. STANDARD LEATHER SOLO SPRING SADDLE F. DELUXE LEATHER SOLO SPRING SADDLE
WITH NOSTALGIC SKIRT
156 CRUISER CRUISER 157
Seating Accessories Seating Accessories
A. ROAD ZEPPELIN® SEAT PAD D. TANK KNEE PAD KIT
Experience ultimate comfort. Designed to ensure hours of These self-adhesive rubber knee pads provide a touch of old
comfort in the saddle, Road Zeppelin® Seat Pads are equipped school style. The rich black rubber pads feature tapered ribs
with a unique air bladder system that allows your weight to be and a raised Bar & Shield logo to protect the surfaces where
supported evenly across the entire seating surface. Whether your legs contact the tank. The compact pads measure 7.0" by
you have a low-profile seat or a larger more comfortable seat, 2.75", and are flexible enough to fit many tank profiles. Sold in
you will feel the benefits. This air bladder system is designed matched pairs.
to reduce pressure points, provide shock absorption and 57300065
reduce vibration. Unlike other mouth-inflated seat pads, the Fits fuel tanks on many Harley-Davidson Street®, Sportster®,
Road Zeppelin Pad features an easy-to-reach integrated hand Dyna® and Softail® models. May cover a portion of fuel tank
pump and metered air release valve that permits quick and graphics. Check placement before adhering to tank.
controllable adjustment. You can easily adjust the comfort
and support while seated on the pad. The UV-stable and snag- E. REAR FENDER BIB
resistant mesh cover allows air to circulate beneath the rider’s Complete the stripped-down solo look by replacing the
body, reducing the temperature trapped between the rider Original Equipment passenger pillion with this decorative
and seat. Shaped to conform to most Harley-Davidson® seats, fender cover. Form-fitted to hug the contour of the rear fender,
the pads feature adjustable mounting straps and a non-skid D. TANK KNEE PAD KIT
this decorative fender cover hides the passenger pillion
surface to keep them in place. The hand-washable seat pad mounting holes that are exposed when riding with a solo seat.
can be deflated and rolled for compact storage. Styled to match the Original Equipment solo seat, the Fender
52000327 Rider. Bib features a textured leather insert to complete the custom
Fits rider position on all models equipped with Original look. The molded base is finished with a soft felt underliner
Equipment or accessory seats. Also fits passenger position designed to protect the fender’s painted surface.
on Touring models with large pillion area. Pad width – 14.0". 52018-08 Softail® Deluxe Model Styling.
52400162 Passenger. A. ROAD ZEPPELIN SEAT PAD Fits ’05-’17 FLSTN models equipped with Original Equipment
Fits Original Equipment and accessory passenger pillions. rider seat.
Pad length – 12.0"; width – 9.0". 52038-08 Fat Boy® Styling.
Fits ’07-’17 FLSTF, FLSTFB and FLSTFBS models equipped
B. CIRCULATOR SEAT AND BACKREST PADS with Original Equipment rider seat.
Keep comfortable on your next long ride. These breathable
Circulator Pads feature 3D construction that promotes air F. QUICK-RELEASE SEAT HARDWARE KIT
movement and reduces heat buildup where the rider’s body This Quick-Release Hardware Kit allows the rider to remove
touches the seat or backrest. Designed to keep the rider one-piece Harley-Davidson® seats quickly and easily. The
cool by reducing the perspiration buildup between you and knurled knob is easy to install or remove without tools, and
the seating surface, the Circulator Pad can be installed and the nylon washer keeps the finger tightened knob in place and
removed in seconds for easy cleaning. The low-profile design rattle free. A raised-logo Harley-Davidson emblem finishes the
minimizes seat-height change compared to inflatable pads, look. SAE 1/4"-20 thread.
while enhancing comfort with its shock-absorbing construc-
tion. Manufactured of UV-stable materials, these seat pads Fits ’97-later XG, XL, Dyna, Softail (except ’12-’17 FLS models
resist fading when exposed to the sun. Elastic under-seat equipped with Original Equipment seat), Touring and Trike
strap and non-slip base provide secure installation and the E. REAR FENDER BIB – E. REAR FENDER BIB – models equipped with SAE 1/4"-20 seat mount hardware.
available Circulator Passenger Pillion Pad attaches to the rider SOFTAIL DELUXE MODELS FAT BOY MODELS Does not fit seats equipped with spring-loaded rear seat
SOFTAIL
pad with hook-and-loop tabs. bracket.
51076-10 Large Seat Pad. 51676-97A Chrome.
Fits Softail®, Touring and Trike models with Original 10500093 Gloss Black.
Equipment and accessory seats. Will not fit Bobber or Road
Zeppelin seats. Pad width – 16.0". G. SEAT MOUNTING NUTS – GLOSS BLACK
51078-10 Passenger Pillion Pad. When blacking-out your bike, don’t miss the details. These
Fits Original Equipment and accessory passenger pillions. gloss black Seat Mounting Nuts take the hassle out of remov-
Pad width – 13.0". ing your two-piece seat and complete the blacked out look.
52300103 Wide Backrest Pad. These rich black caps dress up the seat mounting tab and the
Fits wide profile rider and passenger backrest pads up to knurled knob makes fastening and unfastening the seat easy
12.0" wide and 9.0" tall. work. No tools required. Sold in pairs.
10400049
C. RAIN COVERS* Fits all Softail and Touring models with Original Equipment or
Featuring a handy storage sack, this black nylon, water-resis- Genuine Motor Accessory 2-piece seat and knurled seat
tant, Cordura® cover packs easily and shelters your seat from B. CIRCULATOR SEAT AND WIDE BACKREST PADS
mounting nuts.
the storm.
51638-97 Solo Seat. H. CHROME SCREWS FOR FLST SEAT BRACKET
Fits H-D® solo seats (except XR and FLSTS). 94289-94T
51639-97 Two-Up. Fits ’87-’99 FLSTC, FLSTF and FLSTN models.
Fits VRSC™, XG, XL, Dyna® and Softail models with Two-Up
seats. Does not fit Touring and Trike models. Does not fit with I. BILLET SEAT MOUNTING BRACKET – CHROME
Rider Backrests. F. QUICK-RELEASE SEAT HARDWARE KIT – F. QUICK-RELEASE SEAT HARDWARE KIT – The highly stylized design of this bracket adds a stunning look
CHROME GLOSS BLACK to the back of most seats.
51804-02
Replaces Bolt-On Seat Brackets P/N 51798-00, 51740-10,
52467-00, 51652-97A and 51652-83B used on most Original
Equipment and accessory seats and pillions.
C. RAIN COVER – SOLO SEAT C. RAIN COVER – TWO-UP SEAT G. SEAT MOUNTING NUTS – GLOSS BLACK I. BILLET SEAT MOUNTING BRACKET – CHROME
158 CRUISER CRUISER 159
Backrests & Racks
A. H-D® DETACHABLES™ SIDEPLATES
In the time it takes for a traffic light to change, you can
transform your motorcycle from a city cruiser to a cross-
country hauler. Start with Harley-Davidson® Detachables™
Sideplates, and add your choice of sissy bar upright and pad
B U I L D I N G A BAC K R E ST to make removing the passenger backrest a simple slide and
click operation. Manufactured and tested to rigorous Harley-
Davidson standards, installation requires separate purchase
of model-specific Docking Hardware Kit.
Fits ’00-’17 FLST, FLSTF, FLSTFB, FLSTFBS, FLSTN, FLSTNSE,
FLSTSB, FLSTSC, FLSTSE, FXSB, FXSBSE, FXST, FXSTB,
A sissy bar upright and passenger backrest are the starting point to build a complete touring machine. The backrest FXSTS, FXSTSSE and ’06 FLSTFSE models with or without
saddlebags (except Heritage Saddlebags P/N 90876-05).
provides long-range comfort and support and adds a feeling of control and confidence for the passenger. Requires separate purchase of Docking Hardware Kit and
may require Directional Relocation Kit. See chart for your
Start by selecting model-specific Docking Hardware, then choose a finish that matches your styling direction, A. H-D DETACHABLES SIDEPLATES application.
53810-00C Chrome.
determine the desired sissy bar height and finally select a backrest pad that complements your seat. 54258-10A Gloss Black.
Fits ’00-’17 FLSTC and ’00-’03 FLSTS models. Also fits ’05-’15
FLST and FLSTSC models with Heritage Saddlebag P/N
90876-05. Requires separate purchase of Docking Hardware
D O C K I N G H A R DWA R E SIDE PLA TES Kit and may require Directional Relocation Kit. See chart for
your application.
53815-00A Chrome.
SOFTAIL
’84-’05 Softail® (except FXSTD) and ’06-’17 FL Softail models
(except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE
and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.
52300022 Chrome.
52300024 Gloss Black.
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FLSTSE and
FXSTC, ’06 FLSTFSE, ’06-’17 FXST, FXSTB and FXSTS and
’07-’08 FXSTSSE models with appropriate sideplates. ’07-’10
2000-later Softail® Docking Hardware for H-D® Detachables™ Racks, Tour Pak® Racks & Sideplates FXSTC models require separate purchase of Fender Mounted
SE L EC T T H E D O C K I N G H A R DWA R E Docking hardware fitment is dependent on vehicle model and saddlebag configuration. Seat.
51477-06 Chrome.
H-D Detachables Accessory Available to fit: Docking Hardware Directional Relocation Kit 54256-10 Gloss Black.
No Saddlebags Detachable Sideplates 53810-00C (Chrome), 2003-2017 FXST, FXSTB, FXSTS, FXSTSSE, Fits ’13-’17 FXSB and FXSBSE, ’16-’17 FXSE and ’09 FXSTSSE
53959-06 Chrome
53857-00B (Wrinkle Black), 54258-10A (Gloss Black), Solo Detach FXSTC, FLSTF, FLSTFB, FLSTFBS, FLSTSB, 53932-03A models with appropriate H-D Detachables sideplates.
54268-10 Black
Rack 53649-05A (Chrome), 53612-08, 53652-05 (Black), 2006 FLSTFSE
One-Piece Detach Sissy Bar Upright P/N 53618-05 (Chrome),
FXSTSSE models require separate purchase of Hardware Kit
52729-08 (Black), FXS One-Piece Sissy Bar P/N 52828-11, 2005-2017 FLSTN, FLST 53932-03A Not Required P/N 52300306.
52760-11, Solo Detach Tour-Pak® Rack 53559-04B or Two-Up 53959-06 Chrome 52540-09A Chrome.
Detachable Tour-Pak Rack 54051-08A, 53066-00D. 2005-2007 FLSTSC 53932-03A
54268-10 Black
52300401 Gloss Black.
2011-2017 FLS, FLSS, FXS 53932-03A 54296-11
2013-2017 FXSB, FXSBSE, 2016-later FXSE 52300239 Not Required C. STANDARD SISSY BAR UPRIGHT
B. LOW SISSY BAR UPRIGHT – CHROME B. LOW SISSY BAR UPRIGHT – GLOSS BLACK Give your passenger additional back support with a Standard
With P&A Saddlebags Detachable Sideplates 53810-00C
(Chrome), 53857-00B (Wrinkle Black), 54258-10A (Gloss Black), (52540-09A SHOWN) (52300401 SHOWN) Sissy Bar Upright designed to accept a wide variety of back-
Solo Detach Rack 53649-05A (Chrome), 53612-08, 53652-05 rest pads.
2006 FLSTFSE, 2003-2017 FLSTF, FLSTFB,
(Black), One-Piece Detach Sissy Bar Upright P/N 53618-05 53959-06 Chrome
FLSTFBS, FLSTSB, FXST, FXSTB, FXSTC, FXSTS, 53930-03B Fits ’04-later XL models with H-D Detachables sideplates,
(Chrome), 52729-08 (Black), Solo Detach Tour-Pak Rack 54268-10 Black
2007-2008 FXSTSSE
53559-04B, Two-Up Detachable Tour-Pak Rack 54051-08A, ’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG),
53066-00D. ’84-’05 Softail (except FXSTD) and ’06-’17 FL Softail models
(except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE
With P&A Saddlebags 53015-05, 53061-00A, 88237-07,
88238-07, 88263-07, 88286-07, 90058-05, 90114-00A, 2005-2017 FLST, FLSTN 53930-03B Not Required and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.
90119-00A, 90130-00B, 90133-06B, 90200765, 90200816, 52300018 Chrome.
90201389, 90320-00B, 90384-04, 90384-06, 90388-04, 53959-06 Chrome
90419-08, 91536-00A, 91537-00A, 91555-01A, 92000-00B and
2005-2007 FLSTSC 53930-03B
54268-10
52300020 Gloss Black.
Black
92015 03.
92015-03.
With Original Equipment Saddlebags Detachable Sideplates 2003-2017 FLSTC 53931-03A Not Required
53815-00A (Chrome), Adjustable Sideplates 52300001 (Chrome), Chrome
53959-06
Solo Detach Rack 53649-05A (Chrome), 53652-05 (Black), Solo 2003 FLSTS 53931-03A
54268-10 Black
Detach Tour Pak Rack 53559-04B or Two-Up Detachable Tour Pak
Rack 54051-08A, 53066-00D with Original Equipment Saddlebags 53959-06 Chrome
2005-2007 FLSTSC 53931-03A
or with P&A Saddlebags P/N 90876-05. 54268-10 Black
2006 FLST 53931-03A Not Required
B. ONE-PIECE H-D DETACHABLES SISSY BAR – SOFTAIL® Fits Low Medallion Style Sissy Bar Upright P/N 52655-84,
BLACKLINE® & SOFTAIL SLIM® MODELS 52909-02, 52754-04, 51851-09, Standard Medallion Style
Sweeping curves and a sleek gloss black finish add a custom Sissy Bar Upright P/N 52735-85 or 52877-08, Standard
look to this detachable Sissy Bar. Featuring a slotted base and Square Bar Mini Medallion Style Sissy Bar Upright P/N 53281-
1 2 06 or 53407-06, Standard Heritage Style Sissy Bar Upright
beefy solid bar upright, the one-piece design incorporates
exclusive cam lock H-D Detachables hardware that allows you P/N 52731-00 and Standard Round Bar Sissy Bar Upright
to install or remove the passenger backrest in seconds. Just P/N 52300018 or 52300020.
add a backrest pad to complete the system. 1. 52612-95 Smooth Top-Stitched.
52760-11 Standard-Height, Gloss Black. 2. 52412-79A Embossed Bar & Shield Logo.
Fits ’11-’17 FLS and FLSS and ’11-’13 FXS models. Requires 3. 52348-97 Heritage Classic Bucket.
separate purchase of appropriate Docking Hardware 4. 52347-97 Fat Boy® Bucket.
P/N 53932-03A and Turn Signal Relocation Kit P/N 54296-11.
5. 51132-98 Smooth Bucket.
Models equipped with Side-Mount License Plate require
Relocation Kit P/N 67900127A. Models equipped with a
center-mount license plate and fender-mounted reflectors E. BACKREST PADS
require installation of additional components (sold A. ONE-PIECE H-D DETACHABLES TALL SISSY BAR UPRIGHT – GLOSS BLACK Sized to fit medallion and mini medallion-style sissy bar
(SHOWN WITH PASSENGER BACKREST PAD) uprights. Pad mounts with single center screw and bolt-on
SOFTAIL
separately): Red Reflector Kit P/N 67900223 or Amber
Reflector Kit P/N 67900224. mounting strap. Includes chrome-plated mounting hardware.
Fits Low Medallion Style Sissy Bar Upright P/N 52754-04
Also available:
or 51851-09, Low Square Bar Mini-Medallion Style Sissy Bar
PASSENGER BACKREST PAD – SOFTAIL® BLACKLINE™ Upright P/N 53282-06, Standard Square Bar Mini Medallion
MODEL Style Sissy Bar Upright P/N 53281-06 or 53407-06, Standard
Styled to complement the FXS Original Equipment or acces- Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98,
sory seats, these compact Backrest Pads are the perfect 52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style
match for Softail Blackline™ motorcycle. Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage
52300038 Smooth. Style Sissy Bar Upright P/N 52731-00 and Low Round Bar
Fits ’11-’17 FLS and FLSS and ’11-’13 FXS models. Requires 4 Sissy Bar Upright P/N 52300022 or 52300024.
3 5
Fits ’11-’17 FLS, FLSS and ’11-’13 FXS models equipped with 1. 52652-04 Smooth.
Sissy Bar P/N 52760-11 or 52828-11.
2. 52626-04 Smooth Top-Stitched.
D. BACKREST PADS
1 2
B. ONE-PIECE H-D DETACHABLES SISSY BAR – BLACKLINE & SLIM E. BACKREST PADS
AND PASSENGER BACKREST PAD
162 CRUISER CRUISER 163
Backrests & Racks Backrests & Racks
A. AIR FOIL PREMIUM LUGGAGE RACK* D. H-D® DETACHABLES™ SOLO RACKS*
The low-profile aerodynamic styling defines the look of this Add touring capabilities to your solo seat Softail® model in
Luggage Rack. Available in mirror chrome or rich gloss black less than 60 seconds. This detachable Solo Rack fits over
finish, the die-cast rear “Air Foil” grabs your attention and the the fender when the passenger pillion is removed. The rack
Bar & Shield insert adds a signature touch. The elegant round features brazed hand-polished tubing and the chrome or black
tube rack features inlayed rubber runners for added grip finish adds a stylish flair. Requires Docking Hardware. Easily
and dedicated bungee mounting points to simplify luggage interchangeable with detachable Passenger Sissy Bar Upright
tie-down. Kit includes all necessary mounting hardware. For and Sideplates.
added visibility, the rack is designed to incorporate the inter- 50300099A Gloss Black.
nal wiring of the Air Foil Rack LED Light Kit P/N 68000076 Fits ’12-’17 FLS and FLSS and ’11-’13 FXS models. Requires
(red) for a clean look. separate purchase of appropriate Docking Hardware
Fits ’04-later XL models equipped with H-D® Detachables™ P/N 53932-03A and Turn Signal Relocation Kit P/N 54296-11.
Sideplates, ’06-’17 Dyna® models (except FXDF, FXDFSE and Models equipped with Side-Mount License Plate require
’10-’17 FXDWG) equipped with Detachable Sideplates, ’84-’05 Relocation Kit P/N 67900127A. Models equipped with a
Softail® (except FLSTN and FXSTD) and ’06-’17 FLST, FLSTC, center-mount license plate and fender-mounted reflectors
FLSTNSE and FLSTSC and ’06 FLSTF models equipped with require installation of additional components (sold
Detachable Sideplates. separately): Red Reflector Kit P/N 67900223 or Amber
Reflector Kit P/N 67900224.
54290-11 Chrome.
54291-11 Gloss Black. E. FIVE BAR SPORT LUGGAGE RACK – CHROME*
This rack brings touring flexibility to your motorcycle. Can
B. LED LIGHT KIT** be used with H-D Detachables or Rigid Mount Sissy Bar
This fast-acting LED Light Kit operates as a supplemental rear Sideplates.
running light and brake light. The high, center-mount position 53862-00
A. AIR FOIL PREMIUM LUGGAGE RACK – CHROME D. H-D DETACHABLES SOLO RACK – E. FIVE BAR SPORT LUGGAGE RACK –
places the light in the line-of-sight of following vehicles and Fits ’04-later XL models (except XL1200CX) equipped with
GLOSS BLACK CHROME
the bright, fast-acting LED lamps get you noticed. Wiring is Detachable Sideplates, ’06-’17 Dyna® models (except FXDF,
(50300099A SHOWN)
concealed inside the rack tubes for a clean, custom installa- FXDFSE and ’10-’17 FXDWG) equipped with Detachable
tion. Available with red lens. Sideplates, ’84-’05 Softail® (except FLSTN and FXSTD), ’06-
68000076 Red Lens. ’17 FLST, FLSTC and FLSTSC and ’06 FLSTF models equipped
Fits Air Foil Luggage Rack P/N 54290-11, 54291-11 and Air with Detachable Sideplates. Does not fit with Round Bar
Wing Sissy Bar Upright P/N 52300146 and 52300147. Uprights P/N 52300018, 52300020, 52300022 and
Installation requires separate purchase of model-specific 52300024.
Wiring Harness Kit.
F. LOCKING H-D DETACHABLES LATCH KIT
Also available: This unique lock replaces the cam lock on your Harley-
LED LIGHT KIT WIRING HARNESS Davidson® Detachables™ accessories, providing additional
Required for installation of LED Light Kit on Air Foil Luggage security and peace of mind when parking your vehicle. The kit
Rack P/N 54290-11 or 54291-11. includes two extended-reach barrel-style keys for easy access
73415-11 to the lock. Key registration and replacement service is avail-
Fits ’06-’17 Dyna (except FXDF, FXDFSE, ’14-’17 FXDL, ’16-’17 able. Sold in pairs.
FXDLS and ’10-’17 FXDWG), ’84-’05 Softail (except FLSTN
SOFTAIL
Fits all models equipped with detachable Sideplates, Racks
and FXSTD), ’06-’17 FLST, FLSTC and FLSTSC and ’06 FLSTF and Tour-Pak® Luggage Carriers (except ’18-later Softail
models with Air Foil Luggage LED Light Kit P/N 68000076 or models with HoldFast™ racks and uprights or ’09-later Touring
68000077. models equipped with detachable Solo Tour-Pak Rack).
C. CUSTOM TAPERED SPORT LUGGAGE RACK* 90300087 Chrome.
Smooth sweeping curves and the brilliant chrome or gloss 90300086 Black.
black finish define the look of this Sport Luggage Rack.
Designed to complement both round and square bar Sissy Bar G. H-D DETACHABLES LATCH KIT – CHROME
Uprights, this sleek rack adds a practical and stylish touch to Decorative chrome latches are the perfect way to enhance
the motorcycle. the appearance of your detachable accessories. Meticulously
polished and chrome-plated, these easy-to-install Rotary
Fits ’04-later XL models (except XL1200CX) equipped with Latches are a direct replacement for the Original Equipment
H-D Detachables Sideplates, ’06-’17 Dyna models (except satin black parts and are a simple way to add a finishing touch
FXDF, FXDFSE and ’10-’17 FXDWG) equipped with Detachable to your ride. Latches feature an easy-to-pull finger release to
Sideplates, ’84-’05 Softail (except FLSTN and FXSTD) and A. AIR FOIL PREMIUM LUGGAGE RACK – B. LED LIGHT KIT – AIR FOIL RACK F. LOCKING H-D DETACHABLES LATCH KIT – F. LOCKING H-D DETACHABLES LATCH KIT – simplify access in hard-to-reach areas.
’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC and ’06 FLSTF GLOSS BLACK CHROME BLACK 12600036
models equipped with Detachable Sideplates.
Fits all models equipped with detachable Sideplates, One-
50300030 Chrome. Piece Sissy Bar Uprights, Racks, and Tour-Pak Luggage
50300031 Gloss Black. Mounting Racks (except ’18-later Softail models with
HoldFast racks and uprights).
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FLSTSE and
FXSTC, ’06 FLSTFSE, ’06-’15 FXST, FXSTB and FXSTS and
H. REAR DOCKING HARDWARE COVER KIT
’07-’08 FXSTSSE models with Detachable Sideplates and
Disguise the rear docking hardware with these easy-to-install
Sissy Bar Uprights. FXSTC models require separate purchase
covers. The caps slide over the exposed docking points and
of Fender Mounted Seat.
are held in place by a strong magnetic pull. The caps are easy
53953-06 Chrome. to remove when you wish to reinstall detachable accessories.
54263-10 Gloss Black. Covers are available with brilliant chrome or durable gloss
black finish to match your bike’s attitude. Sold in pairs.
Fits many accessory docking hardware kits. Refer to the
fitment matrix in this P&A Catalog Page 543 or the Parts &
H. REAR DOCKING HARDWARE COVER KIT – Accessories section of www.harley-davidson.com for details.
BLACK
48218-10 Short Chrome (pair).
48220-10 Large Chrome (pair).
48035-09 Small Chrome (pair).
*WARNING: Do not use this rack as a seat. Do not
48221-10 Short Black (pair).
exceed the fender rack weight capacity. Using as seat 48223-10 Large Black (pair).
or exceeding this capacity could cause handling prob- 48225-10 Small Black (pair).
lems, which could result in loss of control and death or
serious injury.
*WARNING: Do not use this rack as a seat. Do not
exceed the fender rack weight capacity. Using as seat
**WARNING: Disconnecting your DOT-required tail, or exceeding this capacity could cause handling prob-
brake and turn signal lighting could reduce your visibil- lems, which could result in loss of control and death or
ity to others and result in death or serious injury. serious injury.
C. CUSTOM TAPERED SPORT LUGGAGE RACK – C. CUSTOM TAPERED SPORT LUGGAGE RACK – G. H-D DETACHABLES LATCH KIT – H. REAR DOCKING HARDWARE COVER KIT –
CHROME (53953-06 SHOWN) GLOSS BLACK (54263-10 SHOWN) CHROME CHROME
164 CRUISER CRUISER 165
Saddlebags & Luggage Saddlebags & Luggage
A. LOCKING LEATHER COVERED RIGID SADDLEBAGS E. H-D® DETACHABLES™ LEATHER SADDLEBAGS –
These saddlebags offer a premium leather look with an extra- FAT BOY® MODEL LACING
durable construction. The blow-molded core keeps the bag Styled to complement the ’07-’11 Fat Boy® model. These large-
rigid and prevents sagging, while the unique lids open outward capacity detachable saddlebags are completely removable
for added flair. Bags feature locks for additional security. with the simple pull of the internal handle, leaving your bike
Luggage capacity: 1800 cubic inches total. clean and ready to cruise the boulevard. The handsome leather
53061-00B bags feature hidden quick-release clips behind the traditional
Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTNSE, strap and buckle. When removed, the large-capacity bags
FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and FXSTD). Also leave behind two simple, inconspicuous docking points. The
fits ’09 FXSTSSE models. FXSTC models require separate bags are compatible with both rigid and H-D® Detachables™
purchase of Hardware Kit P/N 90573-07. Fits ’84-’99 Softail accessories when installed with the appropriate docking hard-
models with separate purchase of Directional Relocation Kit ware kits. Luggage capacity: 2400 cubic inches total.
P/N 53692-96. (FLST, FLSTC and FLSTS models do not 88306-07A
require this Directional Relocation Kit). (Does not fit ’84-’99 Fits ’07-’17 FLSTF, FLSTFB and FLSTFBS models. Models
models equipped with H-D® Detachables™ accessories). equipped with detachable accessories require separate
Does not fit with Rear Axle Covers, Wide Tire Kit P/N 43684- purchase of Docking Hardware Kit P/N 88256-07. Models
A. LOCKING LEATHER COVERED RIGID SADDLEBAGS
99 or Flat Lens Turn Signal Kit P/N 68431-95. FLSTFBS without detachable accessories require separate purchase of
models require the removal of Original Equipment Rear Axle Docking Hardware Kit P/N 53932-03A. Models equipped
Covers. with Rigid Accessories require separate purchase of Docking
Note: Installation of these saddlebags with the following seats Hardware Kit P/N 88298-07. All models require separate
requires the use of Spacer Kit P/N 90976-01A: seats with rider purchase of Rear Directional Relocation Kit P/N 69929-07 or
backrests, Sundowner™ seats, stock FLSTF seat, stock FLSTC, 73369-10. Does not fit with Passenger Footboards or Rear
FXSTC seat and any other seats that contact the lid of the Axle Covers. FLSTFBS models require the removal of Original
saddlebag. Spacer Kit not required if mounting with Harley- Equipment Rear Axle Covers.
E. H-D DETACHABLES LEATHER SADDLEBAGS – FAT BOY LACING
Davidson® Detachables Racks or Sideplates.
F. LEATHER SADDLEBAGS – FAT BOY STYLING
Carry your essentials in style with these premium heavy
B. LOCKING RIGID SADDLEBAGS – SOFTAIL DELUXE
leather saddlebags. They feature a reinforced tub and lid to
STYLING
retain their shape for the long haul, leather straps and chrome
Styled to complement the nostalgic look of the Softail Deluxe
buckles that hide quick-release clips. They are also highly
model, these saddlebags with pleated leather panels are
stylized with a leather embossed lid that features decorative
anything but traditional. The rigid core allows the bag to retain
chrome spots and Spanish lacing to match the ’07 Fat Boy®
its shape even after years of use. The hinged locking lid tilts
model. Luggage capacity: 1700 cubic inches total.
outward for easy access and the embossed weave pattern,
braided edging and chrome concho trim echo the Softail 88286-07
Deluxe seat and pillion for a coordinated look. Luggage capac- Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTC,
ity: 1900 cubic inches total. FLSTNSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and
FXSTD). Also fits ’09 FXSTSSE models. FXSTC models
53015-05B
require separate purchase of Hardware Kit P/N 90573-07.
Fits ’05-’17 FLSTN models. Does not fit FLSTNSE. Does not fit
Also fits ’84-’99 FLSTF, FXST, FXSTC and FXSTS models
with Rear Axle Covers.
B. LOCKING RIGID SADDLEBAGS – SOFTAIL DELUXE STYLING without H-D® Detachables™ accessories when installed with
Directional Relocation Kit P/N 53692-96. Does not fit with
SOFTAIL
C. HERITAGE SOFTAIL® MODEL SADDLEBAGS
Rear Axle Covers, Wide Tire Kit P/N 43684-99A or Flat Lens
Original Equipment on the ’06-’08 Heritage Softail Classic
Turn Signal Kit P/N 68431-95. FLSTFBS models require the
model, these top grade cowhide saddlebags feature rein-
removal of Original Equipment Rear Axle Covers.
forced rim and sides to help maintain their shape. The bags
are decorated with chrome studs and a chrome-plated brass
medallion coined with the Harley-Davidson logo. Saddlebag
G. UNIVERSAL SADDLEBAG LOCK KIT
Keep the contents of your existing soft-sided saddlebags safe
tops have rivet-reinforced corners and are secured with heavy
from the grab-and-go thief. This unique kit features two extra-
leather straps that conceal quick-release hardware. Luggage
small barrel locks that can replace existing saddlebag snaps
capacity: 2200 cubic inches total.
to perform double duty as locks or as snaps when you don’t
90876-05 need to lock your bags. Can be keyed to match your barrel-
Fits ’00-’17 FLSTC models. Also fits ’00-’17 FLST models style ignition key. Sold in pairs.
(except FLSTN, FLSTNSE, and ’10-’12 FLSTSE) with the
separate purchase of Saddlebag Hardware Kit P/N 79304-06. Fits most soft-sided leather and vinyl saddlebags. Does not fit
FLHRC and FLHRS.
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING 90300003 Keyed To Match.
F. LEATHER SADDLEBAGS – FAT BOY STYLING
Styled to complement the ’00-’06 Fat Boy® motorcycle with 90300017 Random Key Code.
the distinctive Fat Boy concho, wider is definitely better when
it comes to these bags, the widest available for Softail models.
Luggage capacity: 1550 cubic inches total.
90320-00D
Fits ’00-’17 Softail models (except FLS, FLSS, FLSTC,
FLSTNSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and
FXSTD). Also fits ’09 FXSTSSE models. FXSTC models C. HERITAGE SOFTAIL STYLE SADDLEBAGS
require separate purchase of Hardware Kit P/N 90573-07.
Also fits ’84-’99 FLSTF, FXST, FXSTC and FXSTS models
without H-D Detachables accessories when installed with
Directional Relocation Kit P/N 53692-96. Does not fit with
Rear Axle Covers, Wide Tire Kit P/N 43684-99A or Flat Lens
Turn Signal Kit P/N 68431-95. FLSTFBS models require the
removal of Original Equipment Rear Axle Covers.
NOTE: Some Harley-Davidson® saddlebags are made of NOTE: Some Harley-Davidson® saddlebags are made of
leather. Fine leathers or other natural materials WILL gain leather. Fine leathers or other natural materials WILL gain
“character,” such as wrinkles or wear, with age. This is normal. “character,” such as wrinkles or wear, with age. This is normal.
A fine, aged patina and character wrinkles are a sign of the A fine, aged patina and character wrinkles are a sign of the
extremely high-quality materials used to construct your extremely high-quality materials used to construct your
saddlebags. The appearance of scars or marks on the leather saddlebags. The appearance of scars or marks on the leather
are a result of using natural leather panels and should not be are a result of using natural leather panels and should not be
thought of as an imperfection. Please use Harley-Davidson® thought of as an imperfection. Please use Harley-Davidson®
Leather Protectant P/N 93600034 to protect your investment. Leather Protectant P/N 93600034 to protect your investment.
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING G. UNIVERSAL SADDLEBAG LOCK KIT
166 CRUISER CRUISER 167
Saddlebags & Luggage Saddlebags & Luggage
A. HERITAGE SOFTAIL® CLASSIC QUICK-DETACH SINGLE-SIDED SWINGARM BAG
SADDLEBAG CONVERSION KIT Less is more. With enough room for the essentials, these styl-
Leave your baggage behind with this innovative set of quick- ish Swingarm Bags eliminate the need to stuff your pockets
detach hardware. This kit converts your Original Equipment or bungee a bag across the passenger pillion. Shaped to hug
fixed-mount Heritage Softail® Classic saddlebags to bags that the contour of your bike’s frame, these compact bags add an
can be removed in just seconds. Just reach inside the bag, pull old-school look. Bags are constructed of heavyweight leather
and twist the locking handle and slide the bags off. You’re left and feature a pouch-style flap lid that is secured with two
with a clean, stripped-down custom look that’s ready to prowl. traditional straps and buckles. The semi rigid-backed bag is
Exclusive 3-point mounting system distributes the load to secured to the left side of the bike with easy-to-install adjust-
minimize flex and bounce and retains the Original Equipment able straps. Luggage capacity: 450 cubic inches total.
weight capacity.
90200641A C. SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN
Fits ’03-’17 FLSTC models equipped with Original Equipment LEATHER
Heritage Softail Classic saddlebags. Installation requires Crafted from supple brown pull-up leather, this classic
separate purchase of appropriate Docking Hardware Kit. Swingarm Bag will gain character and a well-worn authen-
Models equipped with detachable accessories and tic look with use. The flip-open lid is secured with traditional
saddlebags require Docking Kit P/N 90200670. Does not fit straps and buckles, and the bag features antique hardware
with Passenger Footboards, Rear Saddlebag Guards or Rear that complements the old-school look.
Axle Covers. 90201568
Fits ’00-later Softail® models (except FLSTC, FLSTNSE,
Also available: FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
DOCKING HARDWARE KIT equipped with left-hand tool box, passenger footboards,
Required for installation of Quick-Detach Saddlebag Kit chrome swingarm covers, saddlebags, or saddlebag guards.
P/N 90200641 on FLSTC models.
A. HERITAGE CLASSIC QUICK-DETACH SADDLEBAG CONVERSION KIT C. SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN LEATHER
90200670 With Detachable Accessories. D. SINGLE-SIDED SWINGARM BAG – BLACK LEATHER
Fits ’03-’17 FLSTC models equipped with Quick-Detach Constructed with heavy boot-grade leather, this rich black
Saddlebag Kit P/N 90200641A and detachable accessories. Swingarm Bag is the perfect complement to any paint color
or customizing style. The flip-open lid is secured with quick-
B. HERITAGE FLAT TOP & LOCK KIT disconnect clips hidden behind the traditional leather straps
Unique saddlebag structure incorporates a barrel-style lock to and brushed nickel-finished buckles.
secure your Heritage Softail Saddlebags and offers an unob- 90201567
trusive internal reinforcement bracket that adds rigidity and Fits ’00-later Softail models (except FLSTC, FLSTNSE,
preserves the original shape after extended periods of expo- FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
sure to the weather. A custom-shaped plastic inner lid mounts equipped with left-hand tool box, passenger footboards,
easily to the inside of the leather lid to add additional support. chrome swingarm covers, saddlebags, or saddlebag guards.
Barrel-style locks are sold separately and can be ordered
keyed to match your ignition switch. Kit includes reinforce E. BLACK STANDARD LINE SWINGARM BAG
ment bracket, plastic inner lid and all necessary installation Made of ultra-durable leather-like synthetic featuring a
hardware for the left and right side bags. debossed H-D #1 logo, the Black Standard Collection Bags
88373-10A have a simple, black on black style that complements many
styling directions and budgets. An internal reinforcement
SOFTAIL
Fits ’00-’15 FLSTC Original Equipment saddlebags and
Heritage Style Saddlebag Kit P/N 90876-05. Requires system maintains the bag’s shape over time. The “MOLLE-
separate purchase of Keyed-to-Match Barrel Lock Kit P/N style” system of mounting loops accommodate hook and loop
90300010. See instruction sheet for additional installation straps and allow for multiple mounting locations and orienta-
supplies required. tions. The bags feature either matte black enamel buckles with
hidden quick-detach snaps or a hook and loop flap closure.
Also available: This Swingarm Bag features matte black buckles with hidden,
LOCKSET – KEYED TO MATCH quick-release buckles underneath. Straight and perpendicu-
Barrel style lock kit includes 2 locks and 2 keys. lar mounting loops provide versatile and easy mounting. This
90300010 bag is great for storing a small set of tools or additional layers
For use with Heritage Flat Top & Lock Kit P/N 88373-10A. of riding gear. Bag dimensions: 11" W x 11" H x 3.25" D. Internal
capacity: 250CI. Weight/Carrying Capacity: 5 lbs.
90201768
Fits ’00-’17 Softail models (except FLSTC, FLSTNSE, FLSTSE,
FXCW, and FXCWC models). Does not fit models equipped
A. HERITAGE CLASSIC QUICK-DETACH SADDLEBAG CONVERSION KIT D. SINGLE-SIDED SWINGARM BAG – BLACK LEATHER with rear axle covers, left-hand tool box, passenger
footboards, chrome swingarm covers or saddlebag guards.
FLSS and FLSTFBS models require removal of Original
Equipment Rear Axle Covers.
SOFTAIL
E. H-D DETACHABLES SOLO TOUR-PAK LUGGAGE
MOUNTING RACK
Install the Sport or Leather Tour-Pak carrier in a comfortable
back-supporting position. The rack is designed to position the
Tour-Pak Luggage for solo riding and is adjustable over a .75"
range. Simply remove the Tour-Pak Luggage from the conve-
nient detachable hardware, add a Passenger Pillion and the
bike is ready for two-up riding. Tour-Pak, Passenger Backrest
Pad and Docking Hardware sold separately.
53559-04B
Fits ’00-’05 Softail models (except FXSTD). Fits ’06 FLST,
FLSTF and ’06-’17 FLSTC, FLSTN, FLSTSC models. Designed
to accept Color-Matched Sport Tour-Pak or Leather Tour-Pak
D. H-D DETACHABLES TWO-UP TOUR-PAK LUGGAGE MOUNTING RACK Luggage System. Requires separate purchase of appropriate
(SHOWN WITH HERITAGE SOFTAIL CLASSIC TOUR-PAK) Docking Hardware. Some models require separate purchase
of Directional Relocation Kit. See matrix for specific
application. Some EU registration plates may interfere with
the Tour-Pak Rack. Models with rear fender tip trim can be
adapted with the separate purchase of License Plate
Relocation Kit P/N 60095-00A.
SOFTAIL
33876-07 34016-08 Satin Black.
Fits ’86-’17 FL Softail, ’88-’16 Touring and ’08-’16 Trike
models. H. HALF-MOON RIDER FOOTBOARDS
The traditional Harley-Davidson® rubber insert features a
D. HEEL/TOE SHIFTER SHAFT COVER vibration-isolation design for a long, comfortable ride. Kit
Conceal the splined end of the shifter shaft when you remove includes left and right footboard pans and matching rubber
the heel shift lever. The easy-to-install chrome-plated alumi- inserts.
num billet cap is held in place with a flush Allen® screw for a
Fits ’86-’17 FL Softail models.
clean look.
51345-08 Polished Stainless Steel.
35471-05
Fits ’82-’17 FL Softail®, and ’82-later Touring and Trike 51400-08 Gloss Black.
models equipped with heel/toe shift levers. Installation
requires removal of heel shift lever. I. RIDER FOOTBOARD HEEL GUARD
This Heel Guard mounts to the right-side rider footboard and
E. HEEL/TOE SHIFTER SHAFT COVER WITH INSERT protects your boot from contact with the hot exhaust shield.
Conceal the splined shifter shaft when you remove the heel Kit includes chrome guard with cutaway Bar & Shield logo and
shift lever. The kit includes a cover for the shaft end and an all mounting hardware.
insert that conceals the casting and nylon spacer inboard of 50500225
the shift lever. Manufactured from billet aluminum, these easy- Fits ’12-’16 FLD, ’86-’17 FL Softail, ’86-later Touring and ’09-
to-install chrome-plated covers are held in place with flush later Trike models equipped with Traditional and Swept Wing
Allen screws for a clean appearance. footboards. Does not fit models equipped with Half-Moon,
35495-06 B. BILLET STYLE HEEL/TOE SHIFT LEVER – C. FOLDING HEEL SHIFTER G. BILLET STYLE SHIFT LEVER – H. HALF-MOON RIDER FOOTBOARDS Tapered, Airflow, Defiance, Dominion™ or Burst footboards,
Fits ’00-’17 FL Softail models (except FLSTSE) equipped with STANDARD LENGTH, SATIN BLACK SATIN BLACK Extended Reach Rider Footboards P/N 50409-04 or 54145-
heel/toe shift levers. Installation requires removal of heel 10, Rider Running Boards P/N 50500158 or Screamin’ Eagle®
shift lever. Fat Exhaust Shield.
D. HEEL/TOE SHIFTER SHAFT COVER E. HEEL/TOE SHIFTER SHAFT COVER I. RIDER FOOTBOARD HEEL GUARD
WITH INSERT
172 CRUISER CRUISER 173
Foot Controls Foot Controls
A. GEAR SHIFTER LINKAGE COVER D. PASSENGER FOOTPEG MOUNT KIT
A simple and inexpensive way to detail your Softail® model. A necessary addition when converting your solo seat model to
This easy-to-install chrome-plated cover conceal the stock a two-up passenger-carrying ride. Kit includes black mount-
shifter linkage for a brilliant finish. Kit includes all necessary ing brackets and all necessary mounting hardware. Footpegs
mounting hardware. sold separately.
46302-01 Harley-Davidson Script. 50932-08
Fits ’99-’17 Softail® models (except FLSTSE) with stock Fits ’12-’17 FLS, FLSS and ’08-’11 FLSTSB models.
shifter linkage.
E. PASSENGER FOOTBOARD AND MOUNT KITS
B. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS Add passenger comfort and support. These complete kits
BLACK include specially designed mounting stud/brackets for conve-
Add the finishing touch to your blacked-out ride. This Gloss nient bolt-on installation. Footboards fold up when not in
Black Shift Linkage is easy to install and includes a transmis- use. Available in your choice of Original Equipment or mirror-
sion lever cover and decorative acorn nuts and bolts for a chrome finish, these kits include footboard pans, rubber pads,
complete custom look. mounting hardware and matching chrome or black footboard
33600259 A. GEAR SHIFTER LINKAGE COVER – HARLEY-DAVIDSON SCRIPT supports. NOTE: Passenger Footboard Kits cannot be used
Fits ’86-later Softail (except ’18-later FXBB, FXLR, FXLRS and with Pivot Bolt Covers.
’20-later FXST), Touring and Trike models. (Does not fit ’97- Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTF, FLSTFB,
’99 FLSTS or models equipped with Softail Extended Reach FLSTFBS, FLSTN, FLSTNSE, FLSTS, FLSTSB, FLSTSC, FLSTSE,
Forward Controls.) FXS, FXSBSE, FXCW, FXCWC and FXSTD). ’00-’15 FLSTC
models require Saddlebag Bracket Relocation Kit P/N
C. CUSTOM GEAR SHIFT LINKAGES 90238-00.
Kick your custom into gear with this collection of high-qual-
ity custom shift linkages. Available in a variety of designs to 50602-00A Black.
D. PASSENGER FOOTPEG MOUNT KIT
match your bike’s style, these linkages feature aircraft-qual- 52715-04A Chrome.
ity rod ends for easy adjustment and smooth operation. The
easy-to-install linkage kit also includes a transmission lever F. PASSENGER FOOTBOARD SUPPORT KITS
cover for ’86-’17 Softail and ’86-’16 Touring and Trike models, Add the comfort and convenience of passenger footboards
and decorative acorn nuts and bolts for a complete custom to your Softail motorcycle. These support kits are designed
look. to allow installation of traditional D-shaped, Swept Wing,
Tapered or Old-Style Passenger Footboards (sold separately)
Fits ’86-later Softail (except ’18-later FXBB, FXLR, FXLRS and on Softail models. Kit includes left and right supports, foot-
’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 board mount hinge pins and installation hardware.
FLSTS or models equipped with Softail Extended Reach
Forward Controls.) Fits ’00-’17 Softail models (except FLS, FLSS, FLSTF, FLSTFB,
1. 34018-08 Slotted Black Anodized. FLSTFBS, FLSTN, FLSTNSE, FLSTS, FLSTSB, FLSTSC,
FLSTSE, FXS, FXSBSE, FXCW, FXCWC and FXSTD). ’00-’15
2. 34850-09 Skull. FLSTC models require Saddlebag Bracket Relocation Kit P/N
3. 33801-09 Harley-Davidson Script. 90238-00.
4. 33760-09 Slotted with Bar & Shield Logo. 50459-06 Black.
B. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS BLACK
5. 33814-98A Round. 50460-06 Chrome.
SOFTAIL
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FXS and FXSTD models.
50399-07A Black.
E. PASSENGER FOOTBOARD AND MOUNT KIT – E. PASSENGER FOOTBOARD AND MOUNT KIT –
2
BLACK CHROME
C. CUSTOM GEAR SHIFT LINKAGES F. PASSENGER FOOTBOARD SUPPORT KIT – F. PASSENGER FOOTBOARD SUPPORT KIT –
BLACK (50459-06 SHOWN) CHROME (50460-06 SHOWN)
174 CRUISER CRUISER 175
Foot Controls Engine Guards
A. MINI FOOTBOARD KITS E. MUSTACHE ENGINE GUARD*
Fits rider position: Combine classic shape and modern function for a unique twist
’02-’17 VRSC™ models with forward controls (except on engine protection. The flow of this engine guard comple-
VRSCDX and VRSCF), ’06-earlier XL, ’07-’10 XL883, XL883C, ments the bike’s traditional style while the gracefully curved
XL883R, XL1200C and XL1200R, ’07-’11 XL1200L, ’91-’17 upper section incorporates highway pegs into the shape. The
Dyna® (except FLD), and ’84-’17 Softail® models with forward integrated rubber pads offer a comfortable and slip-resistant
controls (except FXCW, FXCWC, FXS, FXSB, FXSBSE and cushion for your feet while traveling the open road. One-piece
FXSE). 3" Chrome engine guard kit includes all required mounting hardware.
4" Chrome
Fits passenger position: Fits ’00-’17 FL Softail® models.
All models with H-D® male-mount passenger peg mounts 49140-05B Chrome.
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier 49440-10 Gloss Black.
Dyna and Softail models equipped with Shotgun exhaust).
’84-’17 Softail models require separate purchase of Support F. ENGINE GUARD – CHROME*
Kit PN 50454-09. Does not fit passenger position on ’18-later Protect your bike without sacrificing ground clearance or style.
Softail models. The one-piece engine guard is designed to complement the
Fits highway peg position: lines of the motorcycle and the bright chrome finish adds the
All models with frame-mount or engine guard-mount perfect finishing touch.
highway pegs (except Whiskers Adjustable Highway Bar 49004-00A
P/N 50855-09 and 50865-09). 3" Gloss Black Fits ’00-’17 FL Softail models.
50500139 Small 3" – Chrome. 4" Gloss Black 49200-07A
50500144 Small 3" – Gloss Black. Fits ’00-’17 FX Softail models (except models equipped with
50500109 Large 4" – Chrome. Extended Reach Forward Control Kit P/N 49171-04 or 49223-
A. MINI FOOTBOARD KIT E. MUSTACHE ENGINE GUARD – CHROME E. MUSTACHE ENGINE GUARD – GLOSS BLACK 04). FXSE models require the removal of the stock Original
50500124 Large 4" – Gloss Black.
Equipment Chin Spoiler.
Also available: 49004-90
PASSENGER FOOTBOARD SUPPORT KIT Fits ’86-’99 FL Softail models.
Required for installation of Mini Footboards in the passenger
position on many Softail motorcycles. G. ENGINE GUARD – GLOSS BLACK*
A serious finish for serious riders. Before a black powder coat,
50454-09
these engine guards get an extra layer of protection from an
Required for installation of Mini Footboards P/N 50451-09,
E-Coat dip. So go on and install Engine Guard Mount Footpegs
50500109, 50500124, 50500139, 50500144 on ’08-’17
because this finish will go the distance.
Softail models. Does not fit FLS, FLSS, FLSTF, FLSTFB,
FLSTFBS, FLSTN, FLSTSB, FXS, FXSBSE, FXSTD and Softail 49023-02A
models with shotgun exhaust. FLSTC and FLSTS models Fits ’00-’17 FL Softail models.
require the separate purchase of Saddlebag Bracket
Relocation Kit P/N 90238-00. H. NOSTALGIC CURVED ENGINE GUARD – CHROME*
The nostalgic curved shape adds classic style to function-
B. WHISKERS ADJUSTABLE HIGHWAY BAR* ality. Reminiscent of the vintage 1940s style, the one-piece
Fits ’00-’17 Softail® models (except FXCW, FXCWC, FXS, FXSB, chrome Engine Guard complements the lines of the classic
SOFTAIL
FXSBSE and FXSE) without ABS. Also fits ’14-’15 FLSTNSE style Softail Deluxe, Heritage Softail® Classic and FL Springer™
when Original Equipment engine guard is removed. Does models.
not fit with Boom!™ Audio Cruiser Amp and Speaker Kit 49037-05A
P/N 76262-08A, 76320-08A, 76321-09A, Heel Raiser Footpeg Fits ’00-’17 FL Softail models. Compatible with Engine
Kit P/N 50178-09 or Mini Footboard Kits P/N 50500109, Footpeg Mount Kit P/N 49102-86T or 49144-86.
50500124, 50500139, 50500144 or 50451-09.
50855-09 Chrome. I. SOFT LOWERS
50865-09 Gloss Black. Extend your riding season. Full-coverage Soft Lowers provide
wind and mud protection for the rider’s legs and boots and
C. REAR SADDLEBAG GUARDS – CHROME* minimize cold updrafts as the weather changes. Covers are
Saddlebag guards provide a style borrowed from the past that custom shaped to hug the engine guard to minimize flap-
makes a unique statement here and now. Includes mounting ping and they simply clip in place for speedy installation as
hardware and instructions. the weather changes. Two-way zippered outer edge accom-
modates guard-mounted highway pegs in almost any posi-
49261-00A tion. Reflective piping provides added visibility and the rigid
B. WHISKERS ADJUSTABLE HIGHWAY BAR – B. WHISKERS ADJUSTABLE HIGHWAY BAR F. ENGINE GUARD – CHROME G. ENGINE GUARD – GLOSS BLACK
Fits ’00-’17 FLST and FLSTC and ’00-’05 FXST, FXSTB and inner panel provides ample clearance around the foot controls.
GLOSS BLACK
FXSTS models. FLSTC models require Saddlebag Relocation
57100213
Kit P/N 90238-00.
Fits ’86-’17 FL Softail models equipped with Engine Guard
Also available: P/N 49004-90 or 49004-00A. Does not fit Mustache or
SADDLEBAG BRACKET RELOCATION KIT (not shown) Nostalgic Engine Guards. Does not fit models with forward
Required for installation of FLSTS Rear Saddlebag Guards P/N controls, Extended Reach Brake Lever or Extended Reach
49258-00A and FLSTC Rear Saddlebag Guard P/N 49261-00. Shift Lever.
90238-00
Fits ’00-’17 FLSTC, FLSTS and FLSTSB models.
C. REAR SADDLEBAG GUARDS – CHROME D. ERGO JIFFY STAND H. NOSTALGIC CURVED ENGINE GUARD – I. SOFT LOWERS
(49261-00A SHOWN) CHROME
176 CRUISER CRUISER 177
Chassis Trim – Front End Suspension
A. FRONT END KIT – CHROME D. PROFILE® LOW FRONT SUSPENSION*
The front forks on a Harley-Davidson® motorcycle set the Designed by Harley-Davidson to lower the front fork approx-
tone for the bike and can lead the way to a full-bore custom imately 1.0" while preserving ride quality. The kit includes
statement. So start customizing by adding chrome where it springs that are progressively wound for a compliant, yet
will have the most noticeable impact on the overall look of the controlled ride. Must only be installed on vehicles equipped
bike, the front end. A perfect addition during the installation of with low-profile rear suspension.
Premium Ride or Profile® Low Front suspension components, 54758-07
this kit includes components necessary to completely chrome Fits ’07-’17 FLS, FLSS, FLSTC and FLSTN, ’08-’17 FLSTF,
the front forks. Kit includes some or all of the following (Kit FLSTFB, FLSTFBS and ’14-’17 FLSTNSE models. FLSTC, FLS
components vary depending on your model): Chrome Fork (AUS/BRZ/APC), FLSTF and FLSTF Special (Europe/UK)
Sliders, Oil Seals, Chrome Fork Axle Retainer Nut Kit, Chrome models must also be equipped with Profile® Low Rear
Fork Slider Drain Screw Kit, Classic Chrome Front Axle Nut Suspension Kit P/N 54651-05, 54652-05 or 54001-04A.
Cover Kit and Chrome Upper Fork Nut Covers. Chrome Front
End Package price does not include labor or supplies. E. REAR LOWERING KIT*
45400006 Provides low cost alternative to buying complete shocks. This
Fits ’12-’17 FLS, FLSS, FLSTF, FLSTFB and FLSTFBS, kit is for the rider who simply wants to lower his or her bike
’09-’17 FLSTC and ’07-’17 FLSTN models. Also fits ’07-’08 inexpensively and have some ride height adjustability. Kit will
FLSTC with separate purchase of front fork cover lower seat height up to 1.0".
P/N 67830-09. 54001-04A
Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTFB,
B. LOWER FORK SLIDERS – CHROME FLSTFBS, FLSTFSE, FLSTN, FLSTNSE, FLSTSB, FLSTSE,
Competitively priced, these chrome-plated Lower Fork FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD and
Sliders give your bike upfront style. To ensure proper fitment FXSTSSE). Also fits ’12-’17 FLS models in AUS, BRZ and APC
and function, these sliders are manufactured from Original markets. Does not fit models equipped with Profile Lowering
A. FRONT END KIT – CHROME (FAT BOY SHOWN) D. PROFILE LOW FRONT SUSPENSION –
Equipment components. Form follows function, with polished, Kits P/N 54651-05, 54588-94 or 54652-05.
FL SOFTAIL
chrome plating and a stamped Harley-Davidson logo for prod-
uct identification. A perfect addition during the installation of F. PROFILE LOW REAR SUSPENSION*
Premium Ride or Profile Low Front suspension components, This suspension lowers the seat height approximately .75"
this kit includes right and left sliders and the bottom axle while preserving ride quality. Spring and damping rates are
retainer. ’07-later model kits also include chrome drain screws, tailored for Softail models to ensure a controlled ride. Shocks
axle retainer bolts and oil seals. feature multi-staged damping to ensure optimal performance
45500014 under varying conditions. Compatible with Profile Low Front
Fits ’07-’17 FLS, FLSS, FLSTC and FLSTN and ’08-’17 FLSTF, Suspension.
FLSTFB and FLSTFBS models. 54651-05 Chrome.
46482-00 Fits ’00-’17 FLSTC, FLSTB, FLSTF, FLSTS, FXST, FXSTB,
Fits ’00-’06 FLST, FLSTC, FLSTF and FLSTN models. FXSTC and FXSTS models. Also fits ’10-’17 Fat Boy® Special
45310-98 model in UK, Europe, Brazil and select international markets
Fits ’86-’99 FLSTC, FLSTF and FLSTN models. that are factory-equipped with standard-height rear
46477-00 suspension.
Fits ’00-’05 FXDWG and ’00-’06 FXST and FXSTB models.
SOFTAIL
G. COMFORT FLEX REAR SHOCKS*
Also available: For the rider willing to exchange the low-profile, slammed look
FRONT FENDER HARDWARE KIT – CHROME for improved ride comfort. Standard-length shocks raise the
Finish the show-winning look with brilliant chrome hardware. seat height of a factory-lowered bike approximately 1.0" and
Manufactured to Original Equipment specifications, this kit deliver an improved ride through a longer stroke. Spring rates
replaces the zinc-plated exposed front fender mounting bolts and damping are tailored to ensure a controlled ride and opti-
with chrome-plated socket head cap screws. mal performance under varying conditions.
94415-05 54000041
Fits ’93-’05 FXDWG and ’91-’17 Softail® models (except Fits ’05-’17 FLS, FLSS, FLSTFB, FLSTFBS, FLSTN, FLSTNSE,
Springer™, FXCW, FXCWC, FXSB, FXSBSE, FXSE and FXSTD). ’05-’06 FLSTFSE, ’08-’11 FLSTSB, ’10-’12 FLSTSE, ’07-’09
Does not fit with Billet Fork Slider Kit or Inverted Front End FXSTSSE, ’03 FXSTDSE, ’04 FXSTDSE and ’07 FXSTD. Stock
Kit. on ’00-’17 FL and FX models equipped with standard height
rear shocks. Cannot be used on models equipped with Profile
C. LOWER FORK SLIDERS – GLOSS BLACK Low Front Suspension Kits.
These gloss black coated sliders are the ultimate extension B. LOWER FORK SLIDERS – CHROME E. REAR LOWERING KIT F. PROFILE LOW REAR SUSPENSION – CHROME
of your bike’s “dark side” and make a perfect custom addition
to your blacked-out FL Softail® model. Manufactured to
Original Equipment specifications, the durable black coating is
a great match to other H-D® black components. Add matching
Gloss Black Upper Fork Slider Covers P/N 45591-02 for a
complete look. A perfect addition during the installation of
Premium Ride or Profile Low Front suspension components,
this includes right and left sliders, bottom axle retainers, drain
screws, axle retainer bolts and oil seals.
45500015
Fits ’07-’17 FLS, FLSS, FLSTC, FLSTN and FLSTNSE, ’08-’17
FLSTF, FLSTFB, FLSTFBS and ’10-’12 FLSTSE models.
SOFTAIL
45963-97 93500006
Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF Fits ’02-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS,
(except ’07), FLSTFB, FLSTFBS and FLSTN and ’80-’13 ’95-later FLHR and FLHRC, ’95-’13 FLHT, FLHTC and FLHX,
Touring and Trike models. Stock on FLSTNSE and FLSTSE ’10-’13 FLHTCU and FLHTK , ’10-’12 FLHXSE and ’10-’12
models. FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models
without a windshield require separate purchase of Hardware
E. UPPER FORK SLIDER COVERS – GLOSS BLACK Kit P/N 91800030.
The classic Harley-Davidson® motorcycle color is black. It
shows your attitude, your feelings and your desire to be Shown with:
different from the rest. These gloss black accessories are TIE-DOWN BRACKET HARDWARE KIT
the ultimate extension of the Harley-Davidson philosophy. Kit includes 4 button-head bolts required for installation
Manufactured from Original Equipment components, these of Chrome Tie-Down Brackets P/N 93500006 on specified
parts provide superior fit and finish. models.
45591-02 91800030
Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF J. FORK COVER SIDE PANELS – CHROME K. FORK COVER ACCENT STRIP KIT – CHROME Required for installation of Chrome Tie-Down Bracket Kit P/N
(except ’07), FLSTFB, FLSTFBS, FLSTNSE and FLSTN, ’10-’12 93500006 on ’00-’17 FLS, FLSS, FLSTF, FLSTFB and
FLSTSE and ’80-’13 Touring and Trike models. FLSTFBS models without windshields.
F. TEARDROP FRONT FORK ROCKER COVER KIT M. FORK COVER ACCENT STRIPS – GLOSS BLACK
Nostalgic chrome-plated styling that seems to be in constant These strips are designed to add the ultimate complement to
motion. Easily installs on Heritage Springer™ models without the Gloss Black Fork Cover Kit. Finished in matching rich black,
removing wheel. these extruded aluminum pieces fill the gap between the front
43161-97 E. UPPER FORK SLIDER COVERS – F. TEARDROP FRONT FORK and rear covers that is created when the passing lamps are
Fits ’97-’03 FLSTS and ’05-’07 FLSTSC models. GLOSS BLACK ROCKER COVER KIT removed. Strips are sold individually and two are required for
a complete installation.
G. ABS FRONT WHEEL SPACERS 68055-10BHP
It is all in the details. Complete your total front end with these Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
wheel spacers in mirror chrome finish. Manufactured to the FLSTFBS ’93-’96 FLSTN models with Gloss Black Fork Cover
Original Equipment tolerances, they deliver the exact fitment Kit P/N 48608-09. (Does not fit with passing lamps or
and custom shine. Chrome is Original Equipment on FLSTNSE windshields.)
43300010 Chrome.
Shown with:
Fits ’11-’17 FLS, FLSS, FLSTF, FLSTC and FLSTN models with
ABS brakes. FLSTC and FLSTN models require removal of HEADLAMP SHELL – GLOSS BLACK
Original Equipment hub cap. Add to the sinister look of your blacked-out Softail® motor-
cycle. Manufactured from Original Equipment components,
H. ABS HARNESS COVER – CHROME this gloss black headlamp housing replaces the chrome head-
Dress your ABS-equipped Softail model in style. Shaped to lamp shell for a custom look. Shell includes wiring harness
conceal the ABS wheel speed sensor harness, this bracket and connector and accepts the Original Equipment headlamp,
mounts to the brake caliper tabs on the lower fork sliders. The trim ring and mounting hardware.
mirror chrome finish complements the Original Equipment 73294-10
satin polished sliders or serves as the final finishing touch to a Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
complete chrome front end. FLSTFBS and FLSTN models in domestic and right-hand
32700002
drive markets.
Fits ’11-’17 Softail® models (except FXCWC, FXSB and
FXSBSE) equipped with ABS.
G. ABS FRONT WHEEL SPACERS – CHROME H. ABS HARNESS COVER – CHROME L. TIE-DOWN BRACKETS – CHROME M. FORK COVER ACCENT STRIPS –
GLOSS BLACK
180 CRUISER CRUISER 181
Chassis Trim – Front End Chassis Trim – Front End
FRONT AXLE NUT COVERS C. DOMINION™ COLLECTION FORK NUT COVERS
Cover the front axle in style. Available in your choice of Top it off with style. These easy-to-install Fork Stem Covers top
styles, these custom Axle Nut Covers look great with Original of the triple tree for a cohesive look. A perfect complement
Equipment satin-finish fork sliders or add the finishing touch to other Dominion™ Collection Accessories, these Fork Nut
to a complete chrome or blacked-out front end. Easy-to-install Covers provide the finishing touch to your bike’s front end.
kits include all necessary mounting hardware. Sold in pairs. Sold in pairs.
Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-’20 Fits ’06-’17 Dyna® models (except FXDB and FXDSE) and
XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except ’18-later Softail® models (except FXDRS, FXFB, FXFBS,
Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXLRS, FXLRST and FLSB). Also fits ’88-’13 XL (except
FXST-Aus, and FXSTD) and ’08-later Touring and Trike models. XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL,
’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, ’16-later FXDLS, ’94-’05 FXDS-CONV, ’90-’17 FLS, FLSS, FLSTF,
FXBBS, FXBR, FXBRS and FXLR models require separate FLSTFB, FLSTFBS and FLSTN, and ’86-’17 FLSTC models.
purchase of Front Axle Adapter Kit P/N 43000090. ’19-’20 45800117 Gloss Black.
FXDRS, ’18-later FXFB and FXFBS and ’20-later FXLRS and
FXLRST models. require separate purchase of Front Axle D. DEFIANCE COLLECTION UPPER FORK STEM COVERS
Adapter Kit P/N 43000159. A. DOMINION FRONT AXLE NUT COVERS – A. DOMINION FRONT AXLE NUT COVERS – Top it off with style. These easy-to-install Fork Stem Covers
GLOSS BLACK BRONZE continue the Defiance Collection to the top of the triple tree
A. DOMINION™ COLLECTION for a cohesive look. The deep radial grooves define the style
Express your bold, renegade attitude. The machined alumi- of the Defiance Collection, and the choice of chrome, black
num Dominion™ Collection Front Axle Nut Covers add style to or machine cut finishes complement your bike’s polished,
the front of the bike and are the perfect complement to other chrome or blacked-out front end components. Sold in pairs.
Dominion Collection accessories.
43000124 Gloss Black. Fits ’06-’17 Dyna models and ’18-later Softail models (except
C. DOMINION FORK NUT COVERS – GLOSS BLACK FXDRS, FXFB, FXFBS, FXLRS, FXLRST and FLSB). Also Fits
43000123 Bronze. ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05
3 FXD, ’93-’05 FXDL, ’16-later FXDLS, ’94-’05 FXDS-CONV and
B. FRONT AXLE NUT COVERS ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and
1. 44117-07A Chrome – Die-cast. ’86-’17 FLSTC models.
44116-07A Chrome – Billet. 45500514 Chrome.
2. 43000026 Gloss Black – Die-cast. 45500515 Gloss Black.
43428-09 Gloss Black – Billet. 2
45500516 Black Machine Cut.
3. 43000177 H-D Motor Co. – Black.
4. 44148-07A H-D Motor Co. – Chrome. E. UPPER FORK NUT COVERS – CHROME
5. 44114-07 Aluminator. Highlighted with a unique Bar & Shield logo, these polished
triple chrome-plated covers add an additional clean looking
Also available: 1 appearance to your upper fork. Kit comes complete with three
covers, mounting hardware and wrench for easy, on-the-spot
Willie G Skull installation.
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later
XG, ’08-later XL (except ’16-later XL1200X and XL1200XS), 46129-98B
Fits ’06-’17 Dyna models (except FLD, FXDB and FXDSE),
SOFTAIL
’08-‘17 Dyna, ’07-later Softail (except Springer, FLSTNSE,
FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) ’88-’13 XL (except XL883C, XL1200C and XL1200S), ’95-’05
and ’08-later Touring and Trike models. ’18-later FLDE, FLFB, FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV and
FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and
6
and FXST models require separate purchase of Front Axle ’86-’17 FLSTC models.
Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS,
’19-later FXDRS and ’18-later FXFB and FXFBS models require
separate purchase of Front Axle Adapter Kit P/N 43000159.
6. 43000096 Black.
7. 43163-08A Chrome.
Brass Collection
5
8. 43000046
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later XG,
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08- D. DEFIANCE COLLECTION UPPER FORK STEM D. DEFIANCE COLLECTION UPPER FORK STEM
’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB, COVERS – CHROME COVERS – GLOSS BLACK
FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE,
FXSE, FXST-Aus, and FXSTD) and ’08-later Touring and Trike 4
models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL,
FXBB, FXBR, FXBRS, FXLR and FXST models require
separate purchase of Front Axle Adapter Kit P/N 43000090.
’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS and ’18-
later FLSB, FXFB and FXFBS models require separate
purchase of Front Axle Adapter Kit P/N 43000159.
B. FRONT AXLE NUT COVERS D. DEFIANCE COLLECTION UPPER FORK STEM E. UPPER FORK NUT COVERS – CHROME
COVERS – BLACK MACHINE CUT
182 CRUISER CRUISER 183
Chassis Trim – Brakes Chassis Trim – Brakes
1
A. BRAKE BLEEDER AND BANJO BOLT COVERS F. BRAKE CALIPER KIT – RED
Dress your bike in the latest high-performance look. Brilliant
1. Brake Bleeder Screw Cover
red calipers make a powerful visual statement and set your
This cover adds chrome to the unfinished bleeder valve on all bike apart from the ordinary. Manufactured from Original
stock H-D® calipers. Package of two. Equipment components for proven performance, these cali-
43834-98 2 pers will add a stylish touch to the stock bike or add the
Fits ’84-later stock calipers (except XG and XR models). perfect finish to a complete custom equipped with chrome or
blacked-out wheels, rotors and fork sliders.
2. Chrome Banjo Bolt Cover
Die-cast chrome cover provides a custom look to your stock 41300152 Front – Single Disc.
banjo bolts. Fits banjo bolts on front and rear brake master Fits ’15-later Softail® models (except FXLRS, FXDRS, FXFB,
cylinders and front and rear calipers. Installs in seconds. FXFBS, FXSE). Kit includes brake pads.
32715-98
Fits ’84-later models with stock master cylinders and G. BRAKE CALIPER KIT – CHROME
calipers. (Does not fit VRSC™ Rear Master Cylinder, ’06-’17 Add the shine of chrome to your front end with this highly
VRSC calipers, ’15-later XG, ’04-later XL, or ’08-later Dyna®, polished Chrome Front Brake Caliper Kit. Manufactured from
Softail®, Touring and Trike models.) A. BRAKE BLEEDER AND BANJO BOLT COVERS Original Equipment components for proven performance,
these calipers are a great addition to the stock front end or
add the finishing touch to a complete custom with chrome
B. FORK AXLE RETAINER NUT KIT – CHROME
wheels, rotors and chrome fork sliders.
It’s the details that count. Complete the chrome transforma-
tion by adding this finishing touch to your chrome fork sliders. 41300148 Front – Single Disc.
This Axle Retainer Nut Kit includes the stylish chrome-plated Fits ’15-later Softail models (except FXDRS, FXFB, FXFBS,
nuts and chrome lockwashers necessary to replace the stock FXSE). Kit includes brake pads.
hardware. 44395-08 Front – Single Disc.
45813-03 F. FRONT BRAKE CALIPER KIT – RED Fits ’08-’17 Dyna® (except FXDF, FXDLS and ’14-’17 FXDL)
Fits ’91-’05 FXDWG, ’86-’07 FLST, FLSTC, FLSTF and FLSTN, (41300152 SHOWN) and ’08-’14 Softail models (except Springer) equipped with
’91-’07 FXST and FXSTB, and ’84-’13 Touring and Trike single disc front brakes. Brake pads sold separately.
models. 44395-00A Front – Single Disc.
Fits ’00-’03 XL, ’00-’07 Dyna and ’00-’07 Softail models
C. FORK SLIDER DRAIN SCREW KIT – CHROME (except Springer™) equipped with single disc front brakes.
It’s the details that count. Complete the chrome transforma- Brake pads sold separately.
tion by adding this finishing touch to your chrome fork sliders. 42047-08 Rear.
This Fork Slider Drain Screw Kit includes two chrome-plated Fits ’08-’17 Dyna and Softail models. Brake pads sold
drain screws and the seals required to replace the stock separately.
hardware.
45848-03 Shown with:
Fits ’93-’05 FXDWG, ’87-’17 Softail (except Springer™, FXCW, REAR CALIPER BRACKET – CHROME
FXCWC, FXSB, FXSBSE, FXSE and FXSTD) and ’87-’13 Complete a chrome rear brake conversion. This Rear Caliper
Touring and Trike models. Bracket sets your ride apart from the others by replacing the
painted black mount with brilliant chrome. Manufactured from
B. FORK AXLE RETAINER NUT KIT – CHROME C. FORK SLIDER DRAIN SCREW KIT – CHROME the Original Equipment components for exact fit, this mount
D. CUSTOM CALIPER BOLT COVER KIT
SOFTAIL
Cover your 12-point caliper bolts in chrome. These easy-to- will bolt to the existing mounting location.
install chrome covers are held firmly in place with a steel 42048-08 Fits ’08-’17 Softail models.
spring clip and are styled to match the Chrome Rocker Box
Bolt and Headbolt Covers.
40955-05 Four Large and Two Small Covers.
Fits ’00-later front brake calipers (except Springer models,
’06-later VRSC, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-
later Softail, ’08-later Touring and Trike and models equipped
with caliper covers). Also fits rear calipers on ’06-’17 Softail
models (except FXCW, FXSE).
40959-05 Three Large and Two Small Covers.
Fits ’00-later rear brake calipers (except Springer, ’06-later
VRSC, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-later
Softail, ’08-later Touring and Trike and models equipped with
caliper covers). Also fits rear calipers on ’06-’17 Softail G. FRONT BRAKE CALIPER KIT – CHROME G. FRONT BRAKE CALIPER KIT – CHROME
models (except FXCW, FXSE). (41300148 SHOWN WITH (44395-08 SHOWN WITH
CLASSIC CHROME CALIPER INSERT ) CLASSIC CHROME CALIPER INSERT)
E. BRAKE CALIPER INSERTS
Easy-to-install inserts add a finishing touch to the front and
rear brake calipers. Select a style that follows your custom
direction. Self-adhesive backing.
Fits ’00-later front and rear brake calipers on all models D. CUSTOM CALIPER BOLT COVER KIT
(except Springer front, ’06-later VRSC, ’15-later XG, ’04-later (40955-05 SHOWN)
XL, ’18-later Softail rear caliper, and ’08-later Touring and
Trike).
44477-99 Classic Chrome.
44476-99 Harley-Davidson Script.
E. BRAKE CALIPER INSERT – CLASSIC CHROME E. BRAKE CALIPER INSERT – G. FRONT BRAKE CALIPER KIT – CHROME G. REAR BRAKE CALIPER KIT – CHROME
HARLEY-DAVIDSON SCRIPT (44395-08 SHOWN) (SHOWN WITH
CHROME REAR CALIPER BRACKET)
184 CRUISER CRUISER 185
Chassis Trim – Rear End Chassis Trim – Rear End
A. CONTOURED FRAME INSERTS H. UPPER BELT GUARD – CHROME
These Contoured Frame Inserts are shaped to fill the frame Hand-polished and chrome-plated to replace your factory-
recesses that surround the swingarm pivot bolt. Adhesive equipped painted upper belt guard.
backed for easy installation. 60867-08
48211-08 Chrome. Fits ’07-’17 FLS, FLSS, FLSTFB, FLSTFBS, FLSTSB, FLSTSC,
Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB and FXCW, FXS, FXSB, FXSE, FXST and FXSTB models. Stock on
FXSBSE). many ’07-’17 Softail® models.
48212-08 Chrome.
Fits ’08-’17 FXCW, FXCWC, FXSB and FXSBSE and ’16-later I. SHOR’TEE UPPER BELT GUARD – GLOSS BLACK
FXSE models. Give your Softail motorcycle a unique stylish look. Designed
as a direct replacement for the Original Equipment upper belt
B. SOFTAIL® FRAME TRIM SET guard, this slotted steel guard adds a minimalistic “bobbed”
These easy-to-install chrome-plated trim plates fit into the look to the bike’s profile. With its cut-down length and turned-
recesses at the rear of the Softail frame and add a bright up tail, this Upper Belt Guard is the ultimate extension of your
finishing touch. To complete the look, add a set of chrome bike’s personality. Kit includes all required mounting hardware.
Swingarm Pivot Bolt Covers (sold separately). A. CONTOURED FRAME INSERTS B. SOFTAIL FRAME TRIM SET 60300004
47300-88T Fits ’08-’17 Softail models.
Fits ’84-’17 Softail models (except ’00-’17 FLSTF, FLSTFB,
FLSTFBS, FLSTN, FLSTSB and FXSTD models equipped with J. LOWER BELT GUARD
shotgun exhaust). This handsome formed steel guard replaces the Original
Equipment plastic debris deflector, providing a rich smooth
C. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT surface that complements the swingarm and frame. Available
Chrome rear frame inserts get you going on the road toward in chrome or gloss black finish, this complete kit includes all
the perfect Softail. Kit includes Swingarm Pivot Bolt Covers H. UPPER BELT GUARD – CHROME required mounting hardware.
and Frame Inserts. Easy installation kit.
Fits ’07-’17 FLS, FLSS, FLSTC, FLSTN, FLSTNSE, FXS, FXSB,
48452-00 FXSBSE, FXSE and FXSTD models.
Fits ’00-’07 FLSTF, FLSTN and FXSTD models. Does not fit
60654-07A Chrome.
FXSTDSE.
57100179 Gloss Black.
D. SWINGARM PIVOT BOLT COVERS Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FXST, FXSTB
Cover your swingarm pivot bolt with distinctive styling. and FXSTC, ’14-’15 FLSTNSE, ’10-’12 FLSTSE, ’16-’17 FXSE and
Available in your choice of mirror chrome or gloss black finish, ’07-’08 FXSTSSE. Chrome version stock on ’14-’15 FLSTNSE,
this kit includes set screws and Allen® wrench for easy instal- ’10-’12 FLSTSE and ’07-’08 FXSTSSE models.
lation (sold in pairs).
60655-07A Chrome.
Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB,
Fits ’00-’06 Softail models (except ’06 FXST, FXSTB and
FXSBSE, FXSE and FXST-Aus) and models equipped with
FXSTS).
Passenger Footboard Kits.
60316-00A Chrome with H-D Script Logo.
47660-09 Chrome – Die-cast.
C. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT D. SWINGARM PIVOT BOLT COVERS –
47612-08 Chrome – Billet. CHROME
SOFTAIL
47649-09 Gloss Black – Billet.
Fits ’00-’07 Softail models (except FLSTF, FXSTD and models
with Passenger Footboard Kit).
43462-00 Chrome – Die-cast.
Fits ’84-’99 Softail models (except FLSTS).
43897-86B Chrome – Die-cast.
F. SWINGARM PIVOT BOLT COVERS – G. SWINGARM PIVOT BOLT COVERS – BRASS J. LOWER BELT GUARD – CHROME J. LOWER BELT GUARD – GLOSS BLACK
HARLEY-DAVIDSON MOTOR CO. LOGO COLLECTION (60654-07A SHOWN) (57100179 SHOWN)
186 CRUISER CRUISER 187
Chassis Trim – Rear End Chassis Trim – Rear End
REAR AXLE NUT COVERS G. DOMINION™ COLLECTION REAR AXLE NUT COVERS
Cover your rear axle nut in the most traditional way. These Express your bold, renegade attitude. The machined alumi-
Rear Axle Cover Kits complement the matching Front Axle num Dominion™ Collection Rear Axle Nut Covers add style to
Nut covers. Easy to install, these cover kits include necessary the front of the bike and are the perfect complement to other
mounting hardware. Sold in pairs. Dominion Collection accessories.
43000129 Gloss Black.
A. REAR AXLE NUT COVERS Fits ’08-’17 Dyna® and ’08-later Softail® models (except
Fits ’08-’17 Dyna® and ’08-later Softail® models (except FXCW, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-AUS and ’18-later
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).
FLFBS, FLSB, FXBR, FXBRS and FXDRS).
41705-09 Chrome – Die-cast. H. BAR & SHIELD REAR AXLE COVERS
43422-09 Gloss Black – Billet. Add a sweep of chrome to the rear of the swingarm. This
mirror-finished cover hides the axle head and the rear of the
Fits ’00-’07 Softail models (except FLSTS and FLSTSC). (Will swingarm (sold in pairs).
not fit with saddlebags.) 42069-08
44256-01 Chrome – Die-cast. A. REAR AXLE NUT COVERS – A. REAR AXLE NUT COVERS – Fits ’08-’17 Softail models (except FLSTF, FLSTFB, FLSTFBS,
CHROME (44256-01 SHOWN) GLOSS BLACK (43422-09 SHOWN) FXCW, FXCWC, FXSB, FXSBSE and FXSE). Will not fit with
Fits ’09-’11 FXCW and FXCWC, ’13-’17 FXSB and FXSBSE, and
saddlebags.
’16-’17 FXSE models.
44345-09
43000051 Chrome – Billet. Fits ’08-’11 FXCW and FXCWC models. Will not fit with
43000052 Gloss Black – Billet. saddlebags.
B. REAR AXLE NUT COVERS – SATIN CHROME I. REAR AXLE COVERS – CHROME
Cover your rear axle nut in the most traditional way. Finished G. DOMINION REAR AXLE NUT COVERS – Traditional wedge-shaped rear axle covers follow the triangu-
in rich satin chrome, these easy-to-install rear axle covers are GLOSS BLACK lar lines of the Softail swingarm and conceal the swingarm
a subtle addition to blacked-out finishes. Kit includes neces- tail for a clean, custom look. This kit includes left and right
sary mounting hardware. Sold in pairs. covers, complementing trim discs and all required mounting
43000110 hardware.
Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW, 47596-91B
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus and ’18-later FLFB, Fits ’87-’07 Softail models (except FLSTS). Will not fit with
FLFBS, FLSB, FXBR, FXBRS and FXDRS). saddlebags.
C. REAR AXLE NUT COVERS – BRASS COLLECTION J. REAR AXLE ADJUSTER HARDWARE – CHROME
Cover your rear axle nut in the most traditional way. Artistically Highly polished and chrome-plated hex-head bolts replace
manufactured from solid brass, these components feature a the standard hardware for a custom look. Manufactured to
natural antique finish that will age and patina when exposed to Original Equipment specifications to ensure fit and perfor-
the elements. Brass Collection Rear Axle Nut Covers comple- mance, this kit is the perfect addition to a chrome or painted
ment the matching Front Axle Nut covers. Easy-to-install kits swingarm.
include all necessary mounting hardware. Sold in pairs.
A. REAR AXLE NUT COVERS – B. REAR AXLE NUT COVERS – 41202-08 Fits ’08-’17 Softail models.
43000050
GLOSS BLACK (43000052 SHOWN) SATIN CHROME
SOFTAIL
Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW,
FXCWC, FXSB, FXSBSE, FXST-Aus and ’18-later FLFB, FLFBS,
FLSB, FXBR, FXBRS and FXDRS).
E. REAR AXLE NUT COVERS – F. REAR AXLE NUT COVERS – I. REAR AXLE COVERS – J. REAR AXLE ADJUSTER HARDWARE –
H-D MOTOR CO. LOGO, CHROME H-D MOTOR CO. LOGO, GLOSS BLACK CHROME CHROME
188 CRUISER CRUISER 189
Chassis Trim Chassis Trim – Fenders
A. BAR & SHIELD LOGO COIL COVER E. FRONT FENDER TRIM
Featuring a radical open-face design with a Bar & Shield logo Add a sweeping dash of chrome to the front fender. Chrome-
silhouette, this chrome coil cover matches chrome Voltage plated tapered spear features a stepped design that accentu-
Regulator Covers P/N 74597-01, for an integrated custom look. ates the flowing fender lines. Self-adhesive backing simplifies
Includes all mounting hardware. installation.
74616-04 14100618
Fits ’04-’17 EFI Dyna® and ’01-’17 EFI equipped Softail® Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later
models (except FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike
and FXST-Aus). models.
B. VOLTAGE REGULATOR – CHROME F. BAR & SHIELD LOGO FRONT FENDER SPEAR
Original Equipment voltage regulators with a sparkling triple- This chrome-plated trim spear adds a sweeping dash of
plated chrome finish. Hand-buffed, then copper-, nickel- and chrome to the front fender. Featuring a raised Bar & Shield
chrome-plated, these brilliant chrome-plated regulators are logo set against a textured black field, this self-adhesive
the perfect highlight for any Harley-Davidson® motorcycle. medallion is easy to install.
74567-11 Fits ’11-’17 Softail models. E. FRONT FENDER TRIM 91195-04 Large.
74610-08 Fits ’08-’10 Softail models. Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later
Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike
C. VOLTAGE REGULATOR COVER – CHROME models.
With a look that creates its own electricity, this chrome-plated 91194-04 Small.
cover features an embossed Bar & Shield logo and an open- Fits XL, XR, Dyna® (except FLD), FX Softail (except FXFB) and
center grill that allows air to flow right through for regulator ’18-later FLSL models.
cooling. Designed for easy installation. Chrome mounting
hardware included. A. BAR & SHIELD LOGO COIL COVER G. CONCHO FENDER SKIRT
74597-01 This decorative fender skirt features conchos inspired by the
Fits ’01-’17 Softail models (except FXSE). Will fit models Heritage Softail® Classic model.
equipped with Bullet Front Spoiler P/N 57039-XX. Will not fit 59147-96
with other Softail front spoilers. Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
and ’09-’13 Trike models equipped with Original Equipment
D. PREMIUM OIL COOLER KITS fender skirt.
This oil cooler was designed specifically for Harley-Davidson
to out-perform all other coolers in the industry. The cooler H. WILLIE G SKULL FENDER SKIRT
features a unique Turbulator system that evenly distributes This decorative chrome-plated fender skirt is a direct replace-
oil across the cooling chambers. The air fins are designed to ment for stock fender skirt. Features a three-dimensional
efficiently dissipate heat. The oil cooler has been designed sculptured concho with skull design set off with black accents.
to simplify installation and enhance performance. The large Mounting hardware included.
heat exchanger provides excellent cooling efficiency. The kit 59582-02A
features a one-piece adapter plate with integrated thermo- Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
stat that allows oil lines to connect to the oil filter bracket. and ’09-’13 Trike models equipped with Original Equipment
Thermostat activates at 185°F (85°C). Kit comes complete
F. BAR & SHIELD LOGO FRONT FENDER SPEAR F. BAR & SHIELD LOGO FRONT FENDER SPEAR
(LARGE SHOWN) (SMALL SHOWN) fender skirt.
SOFTAIL
with mounting hardware and precut oil lines.
26157-07A Center Mount. I. BAR & SHIELD FENDER SKIRT
Fits ’13-’17 FXSBSE and ’00-’17 Softail models (except FXSB) This rigid-steel fender skirt, designed to replace the origi-
without ABS. Does not fit ’11 FXCWC. ’08-’10 FXCW and nal factory-equipped aluminum trim, is formed, polished
FXCWC models require separate purchase of Horn and chrome-plated. Its ribbed pattern offers a unique styl-
Relocation Kit for Oil Cooler P/N 69015-08. Does not fit with ing element and adds rigidity. Subtle but distinctive brushed
Softail Front Spoiler Kits, or DEFINITIVE5 Filtration System aluminum Bar & Shield logos are framed by a stamped-in
Kits. Fits with all H-D® Engine Guards. Includes Chrome Oil ribbed outline on both sides.
Cooler Cover. 59228-91
26157-11A Side Mount. Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
Fits ’11-’17 Softail models. Fits with all H-D Engine Guards. Kit and ’09-’13 Trike models equipped with Original Equipment
includes Gloss Black Oil Cooler Cover. fender skirt.
D. PREMIUM OIL COOLER KIT – D. PREMIUM OIL COOLER KIT – I. BAR & SHIELD FENDER SKIRT J. FRONT FENDER EXTENSION – CHROME
’00-’17 SOFTAIL WITHOUT ABS ’11-’17 SOFTAIL WITH ABS
CENTER MOUNT SIDE MOUNT
190 CRUISER CRUISER 191
Chassis Trim – Fenders Chassis Trim – Fenders
A. FRONT FENDER TRIM KIT – CHROME F. HERITAGE FRONT FENDER RAIL – CHROME*
Replace the Original Equipment stainless steel fender trim A stylish re-creation of a popular Hydra Glide model accessory
with a splash of chrome. Kit includes left and right side trim direct from the Harley-Davidson® 1959 accessories catalog.
strip. Ornate, jet, twin-tube design sweeps smartly back along the
59209-91T front fender. Sparkling chrome-plating and years-ahead styl-
Fits ’86-’17 FLSTC and FLSTN and ’82-’13 Touring models ing make it a hit for all Heritage and FLSTN owners.
(except Road Glide® and Road King® Custom). Does not fit 91080-93
models equipped with clean front fender. Fits ’87-’17 FLST, FLSTC and ’93-’96 FLSTN models.
(Does not fit Springer™ models.)
B. FENDER TIP LENS KIT WITH SKULL LOGO
This chrome-plated fender tip lens kit adds a little attitude to G. HERITAGE REAR FENDER RAIL – CHROME*
your ride. The kit features front and rear lenses with a trans- A perfect match to Heritage Chrome Front Fender Rail
lucent illuminated skull silhouette. The easy-to-install kit P/N 91080-93. Designed to fit with stock FLSTC, FLSTN
includes an amber front lens and red rear lens. saddlebags or Genuine Harley-Davidson® Fat Boy® leather
59651-01 saddlebags.
Fits ’86-’17 FLSTC, ’93-’96 FLSTN and ’80-’08 Electra Glide®, A. FRONT FENDER TRIM KIT – CHROME 91402-00
Tour Glide and Road King® models (except FLHRC and Fits ’00-’17 FLST and FLSTC models.
FLHRS).
H. HERITAGE SOFTAIL® CLASSIC REAR FENDER
C. BAR & SHIELD LOGO FENDER TIP LENS KIT LEATHER MUD FLAP
Chrome-plated polycarbonate construction features trans- Get nostalgic with top-grain cowhide decorated with bright
lucent Bar & Shield emblems. The kit includes front and spots and a Heritage-style concho. A perfect match with your
rear lenses. Front lens features an amber Bar & Shield logo, Heritage saddlebags. Kit includes installation hardware and
rear lens features a red Bar & Shield logo. Quick and easy F. HERITAGE FRONT FENDER RAIL – CHROME template.
installation. 59071-98 Fits ’86-’17 FLSTC models.
59081-96 Front and Rear.
Fits ’86-’17 FLSTC, ’93-’96 FLSTN and ’80-’08 FLHR, FLHS, I. HERITAGE SPRINGER™ LEATHER MUD FLAP
FLHT and FLT models. (Does not fit Springer™, FLHRS or WITH FRINGE
FLTR.) Made from premium, plated leather with black trim, these
flaps have fringe and an ’97-’03 FLSTS concho and black
D. H-D® CLASSIC FENDER TIP trim. Includes chrome hardware, support bracket and fender
Stock on Road King Classic models, these nostalgic-look mounting template.
fender tips are also available for other models. Replaces 59027-99
fender lamp assembly. Fits ’97-’03 FLSTS models front or rear fender. Also fits
59002-98 Front. ’86-’17 FLSTC, ’86-’06 FLSTF and ’93-’96 FLSTN models.
Fits ’80-’13 FL, ’86-’08 FLSTC, ’94-’13 FLHR and ’09-’13
FLHTCUTG models.
59052-98 Rear.
Fits ’80-’08 FL and FLHR models and ’86-’99 FLSTC models. A. FRONT FENDER TRIM KIT – CHROME
(Does not fit FLSTF and FLTR models.)
SOFTAIL
E. EAGLE WING FENDER TRIM FOR FAT BOY® MODELS
Classic Eagle Wing logo in gold & chrome with black accent.
Matches Eagle Wing headlamp, tail lamp and turn signal visors.
Fits ’90-’06 FLSTF models.
1. 59369-97 Rear, Gold & Chrome.
Fits ’90-’17 FLSTF, FLSTFB and FLSTFBS models.
2. 59367-97 Front, Gold & Chrome.
B. FENDER TIP LENS KIT WITH SKULL LOGO C. BAR & SHIELD LOGO FENDER TIP LENS KIT
D. H-D CLASSIC FENDER TIP E. EAGLE WING FENDER TRIM FOR H. HERITAGE SOFTAIL CLASSIC REAR FENDER I. HERITAGE SPRINGER LEATHER MUD FLAP
FAT BOY MODELS LEATHER MUD FLAP WITH FRINGE
152 CRUISER CRUISER 153
Seating – Signature Series® Seating – Low Profile
A. SIGNATURE SERIES® SEAT WITH RIDER BACKREST B. BRAWLER® SOLO SEAT
A perfect combination of foam density and shape has created When it’s time to go it alone, go in style. These premium quality
our most comfortable seat for long-haul touring. Both rider cowhide leather solo saddles feature a smooth, sleek design
and passenger will be extra comfy riding to Sturgis and back that hugs the frame rails for a true custom look. The Brawler®
with the wide seating areas. When you reach your destina- seat’s design places the rider “in” the bike for a low-slung
tion, city driving will be easier with the narrow nose that helps riding position, and features a “kick-up” in the rear to hold
keep your legs together. Seat features an easily removable the rider in place. The seating position is generally lower than
adjustable rider backrest that folds down for easier passenger stock, but not as far back as Badlander® or other low-profile
mounting. Rider backrest has a 5-position height adjustment seats. The top-grain leather seating surface and contoured
with 1.5" range and a wide range of forward/back angle adjust- foam padding provide a firm but luxurious feel. Seat does not
ment with a quick twist of the control knob. fit with passenger pillions.
51985-08 Smooth. 52000267
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, and ’06-’15 Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, ’06-’15 FXST,
FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. Does
Does not fit FLSTSE models. FLSTSB models require not fit FLSTSE models. Seat width 12.5".
separate purchase of Passenger Footpeg Mounting Kit
P/N 50932-08 and passenger footpegs. Seat width 16.0"; C. LEATHER BADLANDER® SEAT
passenger pillion width 14.0". The traditional Badlander seat's low and lean style sets the
51998-08 Smooth. stage for your minimalist custom ride. The frame-hugging
Fits ’00-’17 FLST, FLSTC, FLSTNSE, FLSTSC, ’00-’06 FLSTF rider seat and the slim tapered passenger pillion visually
and ’00-’05 Softail® models (except FXSTD). Also fits FLSTN stretch the bike and enhance the slammed look. The seat
models with removal of stock luggage rack. ’00-’06 FLST, shape stays low along its entire length and follows the lines of
FLSTC, FLSTF, FLSTSC and ’00-’05 FX Softail models require the bike with minimal disruption, and delivers a riding position
separate purchase of Seat Bracket P/N 51949-09. Seat width that is lower and generally farther back than the stock seat.
A. SIGNATURE SERIES SEAT WITH RIDER BACKREST – SMOOTH B. BRAWLER SOLO SEAT
16.0"; passenger pillion width 14.0". Ideal for both short riders needing to be closer to the ground,
51922-09 FLSTC Styling with Studs. or for tall riders who want to move back in the bike without
Fits ’00-’17 FLST, FLSTC, FLSTNSE, FLSTSC, ’00-’06 FLSTF sitting higher. This seat is wrapped in supple top-grain leather
and ’00-’05 Softail models (except FXSTD). Also fits FLSTN and finished with an embroidered Harley-Davidson script. Kit
models with removal of stock luggage rack. ’00-’06 FLST, includes leather grab strap and mounting hardware.
FLSTC, FLSTF, FLSTSC and ’00-’05 FX Softail models require 52000254
separate purchase of Seat Bracket P/N 51949-09. Seat width Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, ’06-’15 FXST,
16.0”; passenger pillion width 14.0”. FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. Does
not fit FLSTSE models. FLSTSB models require separate
purchase of Passenger Footpeg Mounting Kit P/N 50932-08
and passenger footpegs. Seat width 12.0"; passenger pillion
width 6.5".
D. BADLANDER SEAT
Clean smooth covers, subtle top-stitching and a frame-
hugging profile add up to a statement only Harley could create.
The low design delivers a reduced seat height that is ideal for
SOFTAIL
riders who want the shortest possible reach to the ground,
and the long and lean shape allows tall riders to move back
from the hand and foot controls without sitting higher on the
bike. Kit includes grab strap and all mounting hardware.
51397-06A
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS and FLSTSB, ’06-’15
FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models.
Does not fit FLSTSE models. FLSTSB models require
separate purchase of Passenger Footpeg Mounting Kit
P/N 50932-08 and passenger footpegs. Seat width 12.0";
passenger pillion width 6.5".
52292-00A
Fits ’00-’17 FLST, FLSTC, FLSTNSE, FLSTSC, ’00-’06 FLSTF
and ’00-’05 FX Softail® models (except FXSTD). Also fits
A. SIGNATURE SERIES SEAT WITH RIDER BACKREST – FLSTC STYLING C. LEATHER BADLANDER SEAT FLSTN models with removal of stock luggage rack. Seat
features embroidered Harley-Davidson script logo. Seat
width 12.0"; passenger pillion width 6.5".
52292-94B
Fits ’84-’99 Softail models (except FLSTS). Seat features
embroidered Harley-Davidson script logo. Seat width 12.0";
passenger pillion width 6.5".
Also available:
SPRING SADDLE INSTALLATION KIT
The torsion-style springs are designed for the optimum
balance between spring suspension and support. Required
for installation of Solo Saddle Kit P/N 52000277, 52000279,
52000278, 52000275, 52000276, 52000180, 54072-10,
A. TOURING PASSENGER PILLION – SOFTAIL DELUXE STYLING
54373-10, 52000114 and 52000113. Kit includes springs,
SOFTAIL
mounting brackets, frame cover and hardware.
54376-10B
Fits ’08-’17 FLSTC and FLSTN models.
Also available:
SOLO SEAT BRACKET/SPRING KIT
This kit is required to install Touring Solo Saddle P/N 51481-08,
Deluxe Leather Solo Saddle P/N 52006-47B or Leather Solo
Saddle P/N 52004-25.
51902-09
Fits ’08-’15 FLSTSB, FXST, FXSTB and FXSTC models.
B. PASSENGER PILLION – SOFTAIL SLIM STYLING E. STANDARD LEATHER SOLO SPRING SADDLE F. DELUXE LEATHER SOLO SPRING SADDLE
WITH NOSTALGIC SKIRT
156 CRUISER CRUISER 157
Seating Accessories Seating Accessories
A. ROAD ZEPPELIN® SEAT PAD D. TANK KNEE PAD KIT
Experience ultimate comfort. Designed to ensure hours of These self-adhesive rubber knee pads provide a touch of old
comfort in the saddle, Road Zeppelin® Seat Pads are equipped school style. The rich black rubber pads feature tapered ribs
with a unique air bladder system that allows your weight to be and a raised Bar & Shield logo to protect the surfaces where
supported evenly across the entire seating surface. Whether your legs contact the tank. The compact pads measure 7.0" by
you have a low-profile seat or a larger more comfortable seat, 2.75", and are flexible enough to fit many tank profiles. Sold in
you will feel the benefits. This air bladder system is designed matched pairs.
to reduce pressure points, provide shock absorption and 57300065
reduce vibration. Unlike other mouth-inflated seat pads, the Fits fuel tanks on many Harley-Davidson Street®, Sportster®,
Road Zeppelin Pad features an easy-to-reach integrated hand Dyna® and Softail® models. May cover a portion of fuel tank
pump and metered air release valve that permits quick and graphics. Check placement before adhering to tank.
controllable adjustment. You can easily adjust the comfort
and support while seated on the pad. The UV-stable and snag- E. REAR FENDER BIB
resistant mesh cover allows air to circulate beneath the rider’s Complete the stripped-down solo look by replacing the
body, reducing the temperature trapped between the rider Original Equipment passenger pillion with this decorative
and seat. Shaped to conform to most Harley-Davidson® seats, fender cover. Form-fitted to hug the contour of the rear fender,
the pads feature adjustable mounting straps and a non-skid D. TANK KNEE PAD KIT
this decorative fender cover hides the passenger pillion
surface to keep them in place. The hand-washable seat pad mounting holes that are exposed when riding with a solo seat.
can be deflated and rolled for compact storage. Styled to match the Original Equipment solo seat, the Fender
52000327 Rider. Bib features a textured leather insert to complete the custom
Fits rider position on all models equipped with Original look. The molded base is finished with a soft felt underliner
Equipment or accessory seats. Also fits passenger position designed to protect the fender’s painted surface.
on Touring models with large pillion area. Pad width – 14.0". 52018-08 Softail® Deluxe Model Styling.
52400162 Passenger. A. ROAD ZEPPELIN SEAT PAD Fits ’05-’17 FLSTN models equipped with Original Equipment
Fits Original Equipment and accessory passenger pillions. rider seat.
Pad length – 12.0"; width – 9.0". 52038-08 Fat Boy® Styling.
Fits ’07-’17 FLSTF, FLSTFB and FLSTFBS models equipped
B. CIRCULATOR SEAT AND BACKREST PADS with Original Equipment rider seat.
Keep comfortable on your next long ride. These breathable
Circulator Pads feature 3D construction that promotes air F. QUICK-RELEASE SEAT HARDWARE KIT
movement and reduces heat buildup where the rider’s body This Quick-Release Hardware Kit allows the rider to remove
touches the seat or backrest. Designed to keep the rider one-piece Harley-Davidson® seats quickly and easily. The
cool by reducing the perspiration buildup between you and knurled knob is easy to install or remove without tools, and
the seating surface, the Circulator Pad can be installed and the nylon washer keeps the finger tightened knob in place and
removed in seconds for easy cleaning. The low-profile design rattle free. A raised-logo Harley-Davidson emblem finishes the
minimizes seat-height change compared to inflatable pads, look. SAE 1/4"-20 thread.
while enhancing comfort with its shock-absorbing construc-
tion. Manufactured of UV-stable materials, these seat pads Fits ’97-later XG, XL, Dyna, Softail (except ’12-’17 FLS models
resist fading when exposed to the sun. Elastic under-seat equipped with Original Equipment seat), Touring and Trike
strap and non-slip base provide secure installation and the E. REAR FENDER BIB – E. REAR FENDER BIB – models equipped with SAE 1/4"-20 seat mount hardware.
available Circulator Passenger Pillion Pad attaches to the rider SOFTAIL DELUXE MODELS FAT BOY MODELS Does not fit seats equipped with spring-loaded rear seat
SOFTAIL
pad with hook-and-loop tabs. bracket.
51076-10 Large Seat Pad. 51676-97A Chrome.
Fits Softail®, Touring and Trike models with Original 10500093 Gloss Black.
Equipment and accessory seats. Will not fit Bobber or Road
Zeppelin seats. Pad width – 16.0". G. SEAT MOUNTING NUTS – GLOSS BLACK
51078-10 Passenger Pillion Pad. When blacking-out your bike, don’t miss the details. These
Fits Original Equipment and accessory passenger pillions. gloss black Seat Mounting Nuts take the hassle out of remov-
Pad width – 13.0". ing your two-piece seat and complete the blacked out look.
52300103 Wide Backrest Pad. These rich black caps dress up the seat mounting tab and the
Fits wide profile rider and passenger backrest pads up to knurled knob makes fastening and unfastening the seat easy
12.0" wide and 9.0" tall. work. No tools required. Sold in pairs.
10400049
C. RAIN COVERS* Fits all Softail and Touring models with Original Equipment or
Featuring a handy storage sack, this black nylon, water-resis- Genuine Motor Accessory 2-piece seat and knurled seat
tant, Cordura® cover packs easily and shelters your seat from B. CIRCULATOR SEAT AND WIDE BACKREST PADS
mounting nuts.
the storm.
51638-97 Solo Seat. H. CHROME SCREWS FOR FLST SEAT BRACKET
Fits H-D® solo seats (except XR and FLSTS). 94289-94T
51639-97 Two-Up. Fits ’87-’99 FLSTC, FLSTF and FLSTN models.
Fits VRSC™, XG, XL, Dyna® and Softail models with Two-Up
seats. Does not fit Touring and Trike models. Does not fit with I. BILLET SEAT MOUNTING BRACKET – CHROME
Rider Backrests. F. QUICK-RELEASE SEAT HARDWARE KIT – F. QUICK-RELEASE SEAT HARDWARE KIT – The highly stylized design of this bracket adds a stunning look
CHROME GLOSS BLACK to the back of most seats.
51804-02
Replaces Bolt-On Seat Brackets P/N 51798-00, 51740-10,
52467-00, 51652-97A and 51652-83B used on most Original
Equipment and accessory seats and pillions.
C. RAIN COVER – SOLO SEAT C. RAIN COVER – TWO-UP SEAT G. SEAT MOUNTING NUTS – GLOSS BLACK I. BILLET SEAT MOUNTING BRACKET – CHROME
158 CRUISER CRUISER 159
Backrests & Racks
A. H-D® DETACHABLES™ SIDEPLATES
In the time it takes for a traffic light to change, you can
transform your motorcycle from a city cruiser to a cross-
country hauler. Start with Harley-Davidson® Detachables™
Sideplates, and add your choice of sissy bar upright and pad
B U I L D I N G A BAC K R E ST to make removing the passenger backrest a simple slide and
click operation. Manufactured and tested to rigorous Harley-
Davidson standards, installation requires separate purchase
of model-specific Docking Hardware Kit.
Fits ’00-’17 FLST, FLSTF, FLSTFB, FLSTFBS, FLSTN, FLSTNSE,
FLSTSB, FLSTSC, FLSTSE, FXSB, FXSBSE, FXST, FXSTB,
A sissy bar upright and passenger backrest are the starting point to build a complete touring machine. The backrest FXSTS, FXSTSSE and ’06 FLSTFSE models with or without
saddlebags (except Heritage Saddlebags P/N 90876-05).
provides long-range comfort and support and adds a feeling of control and confidence for the passenger. Requires separate purchase of Docking Hardware Kit and
may require Directional Relocation Kit. See chart for your
Start by selecting model-specific Docking Hardware, then choose a finish that matches your styling direction, A. H-D DETACHABLES SIDEPLATES application.
53810-00C Chrome.
determine the desired sissy bar height and finally select a backrest pad that complements your seat. 54258-10A Gloss Black.
Fits ’00-’17 FLSTC and ’00-’03 FLSTS models. Also fits ’05-’15
FLST and FLSTSC models with Heritage Saddlebag P/N
90876-05. Requires separate purchase of Docking Hardware
D O C K I N G H A R DWA R E SIDE PLA TES Kit and may require Directional Relocation Kit. See chart for
your application.
PAGE XXX PAGE XXX
53815-00A Chrome.
SOFTAIL
’84-’05 Softail® (except FXSTD) and ’06-’17 FL Softail models
(except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE
and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.
52300022 Chrome.
52300024 Gloss Black.
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FLSTSE and
FXSTC, ’06 FLSTFSE, ’06-’17 FXST, FXSTB and FXSTS and
’07-’08 FXSTSSE models with appropriate sideplates. ’07-’10
2000-later Softail® Docking Hardware for H-D® Detachables™ Racks, Tour-Pak® Racks & Sideplates FXSTC models require separate purchase of Fender Mounted
SE L EC T T H E D O C K I N G H A R DWA R E Docking hardware fitment is dependent on vehicle model and saddlebag configuration. Seat.
51477-06 Chrome.
H-D Detachables Accessory Available to fit: Docking Hardware Directional Relocation Kit 54256-10 Gloss Black.
No Saddlebags Detachable Sideplates 53810-00C (Chrome), 2003-2017 FXST, FXSTB, FXSTS, FXSTSSE, Fits ’13-’17 FXSB and FXSBSE, ’16-’17 FXSE and ’09 FXSTSSE
53959-06 Chrome $50.95
53857-00B (Wrinkle Black), 54258-10A (Gloss Black), Solo Detach FXSTC, FLSTF, FLSTFB, FLSTFBS, FLSTSB, 53932-03A $50.95 models with appropriate H-D Detachables sideplates.
54268-10 Black $50.95
Rack 53649-05A (Chrome), 53612-08, 53652-05 (Black), 2006 FLSTFSE
One-Piece Detach Sissy Bar Upright P/N 53618-05 (Chrome),
FXSTSSE models require separate purchase of Hardware Kit
52729-08 (Black), FXS One-Piece Sissy Bar P/N 52828-11, 2005-2017 FLSTN, FLST 53932-03A $50.95 Not Required P/N 52300306.
52760-11, Solo Detach Tour-Pak® Rack 53559-04B or Two-Up 53959-06 Chrome $50.95 52540-09A Chrome.
Detachable Tour-Pak Rack 54051-08A, 53066-00D. 2005-2007 FLSTSC 53932-03A $50.95
54268-10 Black $50.95
52300401 Gloss Black.
2011-2017 FLS, FLSS, FXS 53932-03A $50.95 54296-11 $50.95
2013-2017 FXSB, FXSBSE, 2016-later FXSE 52300239 $50.95 Not Required C. STANDARD SISSY BAR UPRIGHT
B. LOW SISSY BAR UPRIGHT – CHROME B. LOW SISSY BAR UPRIGHT – GLOSS BLACK Give your passenger additional back support with a Standard
With P&A Saddlebags Detachable Sideplates 53810-00C
(Chrome), 53857-00B (Wrinkle Black), 54258-10A (Gloss Black), (52540-09A SHOWN) (52300401 SHOWN) Sissy Bar Upright designed to accept a wide variety of back-
Solo Detach Rack 53649-05A (Chrome), 53612-08, 53652-05 rest pads.
2006 FLSTFSE, 2003-2017 FLSTF, FLSTFB,
(Black), One-Piece Detach Sissy Bar Upright P/N 53618-05 53959-06 Chrome $50.95
FLSTFBS, FLSTSB, FXST, FXSTB, FXSTC, FXSTS, 53930-03B $50.95 Fits ’04-later XL models with H-D Detachables sideplates,
(Chrome), 52729-08 (Black), Solo Detach Tour-Pak Rack 54268-10 Black $50.95
2007-2008 FXSTSSE
53559-04B, Two-Up Detachable Tour-Pak Rack 54051-08A, ’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG),
53066-00D. ’84-’05 Softail (except FXSTD) and ’06-’17 FL Softail models
(except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE
With P&A Saddlebags 53015-05, 53061-00A, 88237-07,
88238-07, 88263-07, 88286-07, 90058-05, 90114-00A, 2005-2017 FLST, FLSTN 53930-03B $50.95 Not Required and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.
90119-00A, 90130-00B, 90133-06B, 90200765, 90200816, 52300018 Chrome.
90201389, 90320-00B, 90384-04, 90384-06, 90388-04, 53959-06 Chrome $50.95
90419-08, 91536-00A, 91537-00A, 91555-01A, 92000-00B and
2005-2007 FLSTSC 53930-03B $50.95
54268-10 $50.95
52300020 Gloss Black.
Black
9 0 5 03
92015-03.
With Original Equipment Saddlebags Detachable Sideplates 2003-2017 FLSTC 53931-03A $50.95 Not Required
53815-00A (Chrome), Adjustable Sideplates 52300001 (Chrome), Chrome $50.95
53959-06
Solo Detach Rack 53649-05A (Chrome), 53652-05 (Black), Solo 2003 FLSTS 53931-03A $50.95
54268-10 Black $50.95
Detach Tour Pak Rack 53559-04B or Two-Up Detachable Tour Pak
Rack 54051-08A, 53066-00D with Original Equipment Saddlebags 53959-06 Chrome $50.95
2005-2007 FLSTSC 53931-03A $50.95
or with P&A Saddlebags P/N 90876-05. 54268-10 Black $50.95
2006 FLST 53931-03A $50.95 Not Required
B. ONE-PIECE H-D DETACHABLES SISSY BAR – SOFTAIL® Fits Low Medallion Style Sissy Bar Upright P/N 52655-84,
BLACKLINE® & SOFTAIL SLIM® MODELS 52909-02, 52754-04, 51851-09, Standard Medallion Style
Sweeping curves and a sleek gloss black finish add a custom Sissy Bar Upright P/N 52735-85 or 52877-08, Standard
look to this detachable Sissy Bar. Featuring a slotted base and Square Bar Mini Medallion Style Sissy Bar Upright P/N 53281-
1 2 06 or 53407-06, Standard Heritage Style Sissy Bar Upright
beefy solid bar upright, the one-piece design incorporates
exclusive cam lock H-D Detachables hardware that allows you P/N 52731-00 and Standard Round Bar Sissy Bar Upright
to install or remove the passenger backrest in seconds. Just P/N 52300018 or 52300020.
add a backrest pad to complete the system. 1. 52612-95 Smooth Top-Stitched.
52760-11 Standard-Height, Gloss Black. 2. 52412-79A Embossed Bar & Shield Logo.
Fits ’11-’17 FLS and FLSS and ’11-’13 FXS models. Requires 3. 52348-97 Heritage Classic Bucket.
separate purchase of appropriate Docking Hardware 4. 52347-97 Fat Boy® Bucket.
P/N 53932-03A and Turn Signal Relocation Kit P/N 54296-11.
5. 51132-98 Smooth Bucket.
Models equipped with Side-Mount License Plate require
Relocation Kit P/N 67900127A. Models equipped with a
center-mount license plate and fender-mounted reflectors E. BACKREST PADS
require installation of additional components (sold A. ONE-PIECE H-D DETACHABLES TALL SISSY BAR UPRIGHT – GLOSS BLACK Sized to fit medallion and mini medallion-style sissy bar
(SHOWN WITH PASSENGER BACKREST PAD) uprights. Pad mounts with single center screw and bolt-on
SOFTAIL
separately): Red Reflector Kit P/N 67900223 or Amber
Reflector Kit P/N 67900224. mounting strap. Includes chrome-plated mounting hardware.
Fits Low Medallion Style Sissy Bar Upright P/N 52754-04
Also available:
or 51851-09, Low Square Bar Mini-Medallion Style Sissy Bar
PASSENGER BACKREST PAD – SOFTAIL® BLACKLINE™ Upright P/N 53282-06, Standard Square Bar Mini Medallion
MODEL Style Sissy Bar Upright P/N 53281-06 or 53407-06, Standard
Styled to complement the FXS Original Equipment or acces- Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98,
sory seats, these compact Backrest Pads are the perfect 52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style
match for Softail Blackline™ motorcycle. Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage
52300038 Smooth. Style Sissy Bar Upright P/N 52731-00 and Low Round Bar
Fits ’11-’17 FLS and FLSS and ’11-’13 FXS models. Requires 4 Sissy Bar Upright P/N 52300022 or 52300024.
3 5
Fits ’11-’17 FLS, FLSS and ’11-’13 FXS models equipped with 1. 52652-04 Smooth.
Sissy Bar P/N 52760-11 or 52828-11.
2. 52626-04 Smooth Top-Stitched.
D. BACKREST PADS
1 2
B. ONE-PIECE H-D DETACHABLES SISSY BAR – BLACKLINE & SLIM E. BACKREST PADS
AND PASSENGER BACKREST PAD
162 CRUISER CRUISER 163
Backrests & Racks Backrests & Racks
A. AIR FOIL PREMIUM LUGGAGE RACK* D. H-D® DETACHABLES™ SOLO RACKS*
The low-profile aerodynamic styling defines the look of this Add touring capabilities to your solo seat Softail® model in
Luggage Rack. Available in mirror chrome or rich gloss black less than 60 seconds. This detachable Solo Rack fits over
finish, the die-cast rear “Air Foil” grabs your attention and the the fender when the passenger pillion is removed. The rack
Bar & Shield insert adds a signature touch. The elegant round features brazed hand-polished tubing and the chrome or black
tube rack features inlayed rubber runners for added grip finish adds a stylish flair. Requires Docking Hardware. Easily
and dedicated bungee mounting points to simplify luggage interchangeable with detachable Passenger Sissy Bar Upright
tie-down. Kit includes all necessary mounting hardware. For and Sideplates.
added visibility, the rack is designed to incorporate the inter- 50300099A Gloss Black.
nal wiring of the Air Foil Rack LED Light Kit P/N 68000076 Fits ’12-’17 FLS and FLSS and ’11-’13 FXS models. Requires
(red) for a clean look. separate purchase of appropriate Docking Hardware
Fits ’04-later XL models equipped with H-D® Detachables™ P/N 53932-03A and Turn Signal Relocation Kit P/N 54296-11.
Sideplates, ’06-’17 Dyna® models (except FXDF, FXDFSE and Models equipped with Side-Mount License Plate require
’10-’17 FXDWG) equipped with Detachable Sideplates, ’84-’05 Relocation Kit P/N 67900127A. Models equipped with a
Softail® (except FLSTN and FXSTD) and ’06-’17 FLST, FLSTC, center-mount license plate and fender-mounted reflectors
FLSTNSE and FLSTSC and ’06 FLSTF models equipped with require installation of additional components (sold
Detachable Sideplates. separately): Red Reflector Kit P/N 67900223 or Amber
Reflector Kit P/N 67900224.
54290-11 Chrome.
54291-11 Gloss Black. E. FIVE BAR SPORT LUGGAGE RACK – CHROME*
This rack brings touring flexibility to your motorcycle. Can
B. LED LIGHT KIT** be used with H-D Detachables or Rigid Mount Sissy Bar
This fast-acting LED Light Kit operates as a supplemental rear Sideplates.
running light and brake light. The high, center-mount position 53862-00
A. AIR FOIL PREMIUM LUGGAGE RACK – CHROME D. H-D DETACHABLES SOLO RACK – E. FIVE BAR SPORT LUGGAGE RACK –
places the light in the line-of-sight of following vehicles and Fits ’04-later XL models (except XL1200CX) equipped with
GLOSS BLACK CHROME
the bright, fast-acting LED lamps get you noticed. Wiring is Detachable Sideplates, ’06-’17 Dyna® models (except FXDF,
(50300099A SHOWN)
concealed inside the rack tubes for a clean, custom installa- FXDFSE and ’10-’17 FXDWG) equipped with Detachable
tion. Available with red lens. Sideplates, ’84-’05 Softail® (except FLSTN and FXSTD), ’06-
68000076 Red Lens. ’17 FLST, FLSTC and FLSTSC and ’06 FLSTF models equipped
Fits Air Foil Luggage Rack P/N 54290-11, 54291-11 and Air with Detachable Sideplates. Does not fit with Round Bar
Wing Sissy Bar Upright P/N 52300146 and 52300147. Uprights P/N 52300018, 52300020, 52300022 and
Installation requires separate purchase of model-specific 52300024.
Wiring Harness Kit.
F. LOCKING H-D DETACHABLES LATCH KIT
Also available: This unique lock replaces the cam lock on your Harley-
LED LIGHT KIT WIRING HARNESS Davidson® Detachables™ accessories, providing additional
Required for installation of LED Light Kit on Air Foil Luggage security and peace of mind when parking your vehicle. The kit
Rack P/N 54290-11 or 54291-11. includes two extended-reach barrel-style keys for easy access
73415-11 to the lock. Key registration and replacement service is avail-
Fits ’06-’17 Dyna (except FXDF, FXDFSE, ’14-’17 FXDL, ’16-’17 able. Sold in pairs.
FXDLS and ’10-’17 FXDWG), ’84-’05 Softail (except FLSTN
SOFTAIL
Fits all models equipped with detachable Sideplates, Racks
and FXSTD), ’06-’17 FLST, FLSTC and FLSTSC and ’06 FLSTF and Tour-Pak® Luggage Carriers (except ’18-later Softail
models with Air Foil Luggage LED Light Kit P/N 68000076 or models with HoldFast™ racks and uprights or ’09-later Touring
68000077. models equipped with detachable Solo Tour-Pak Rack).
C. CUSTOM TAPERED SPORT LUGGAGE RACK* 90300087 Chrome.
Smooth sweeping curves and the brilliant chrome or gloss 90300086 Black.
black finish define the look of this Sport Luggage Rack.
Designed to complement both round and square bar Sissy Bar G. H-D DETACHABLES LATCH KIT – CHROME
Uprights, this sleek rack adds a practical and stylish touch to Decorative chrome latches are the perfect way to enhance
the motorcycle. the appearance of your detachable accessories. Meticulously
polished and chrome-plated, these easy-to-install Rotary
Fits ’04-later XL models (except XL1200CX) equipped with Latches are a direct replacement for the Original Equipment
H-D Detachables Sideplates, ’06-’17 Dyna models (except satin black parts and are a simple way to add a finishing touch
FXDF, FXDFSE and ’10-’17 FXDWG) equipped with Detachable to your ride. Latches feature an easy-to-pull finger release to
Sideplates, ’84-’05 Softail (except FLSTN and FXSTD) and A. AIR FOIL PREMIUM LUGGAGE RACK – B. LED LIGHT KIT – AIR FOIL RACK F. LOCKING H-D DETACHABLES LATCH KIT – F. LOCKING H-D DETACHABLES LATCH KIT – simplify access in hard-to-reach areas.
’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC and ’06 FLSTF GLOSS BLACK CHROME BLACK 12600036
models equipped with Detachable Sideplates.
Fits all models equipped with detachable Sideplates, One-
50300030 Chrome. Piece Sissy Bar Uprights, Racks, and Tour-Pak Luggage
50300031 Gloss Black. Mounting Racks (except ’18-later Softail models with
HoldFast racks and uprights).
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FLSTSE and
FXSTC, ’06 FLSTFSE, ’06-’15 FXST, FXSTB and FXSTS and
H. REAR DOCKING HARDWARE COVER KIT
’07-’08 FXSTSSE models with Detachable Sideplates and
Disguise the rear docking hardware with these easy-to-install
Sissy Bar Uprights. FXSTC models require separate purchase
covers. The caps slide over the exposed docking points and
of Fender Mounted Seat.
are held in place by a strong magnetic pull. The caps are easy
53953-06 Chrome. to remove when you wish to reinstall detachable accessories.
54263-10 Gloss Black. Covers are available with brilliant chrome or durable gloss
black finish to match your bike’s attitude. Sold in pairs.
Fits many accessory docking hardware kits. Refer to the
fitment matrix in this P&A Catalog Page 543 or the Parts &
H. REAR DOCKING HARDWARE COVER KIT – Accessories section of www.harley-davidson.com for details.
BLACK
48218-10 Short Chrome (pair).
48220-10 Large Chrome (pair).
48035-09 Small Chrome (pair).
*WARNING: Do not use this rack as a seat. Do not
48221-10 Short Black (pair).
exceed the fender rack weight capacity. Using as seat 48223-10 Large Black (pair).
or exceeding this capacity could cause handling prob- 48225-10 Small Black (pair).
lems, which could result in loss of control and death or
serious injury.
*WARNING: Do not use this rack as a seat. Do not
exceed the fender rack weight capacity. Using as seat
**WARNING: Disconnecting your DOT-required tail, or exceeding this capacity could cause handling prob-
brake and turn signal lighting could reduce your visibil- lems, which could result in loss of control and death or
ity to others and result in death or serious injury. serious injury.
C. CUSTOM TAPERED SPORT LUGGAGE RACK – C. CUSTOM TAPERED SPORT LUGGAGE RACK – G. H-D DETACHABLES LATCH KIT – H. REAR DOCKING HARDWARE COVER KIT –
CHROME (53953-06 SHOWN) GLOSS BLACK (54263-10 SHOWN) CHROME CHROME
164 CRUISER CRUISER 165
Saddlebags & Luggage Saddlebags & Luggage
A. LOCKING LEATHER COVERED RIGID SADDLEBAGS E. H-D® DETACHABLES™ LEATHER SADDLEBAGS –
These saddlebags offer a premium leather look with an extra- FAT BOY® MODEL LACING
durable construction. The blow-molded core keeps the bag Styled to complement the ’07-’11 Fat Boy® model. These large-
rigid and prevents sagging, while the unique lids open outward capacity detachable saddlebags are completely removable
for added flair. Bags feature locks for additional security. with the simple pull of the internal handle, leaving your bike
Luggage capacity: 1800 cubic inches total. clean and ready to cruise the boulevard. The handsome leather
53061-00B bags feature hidden quick-release clips behind the traditional
Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTNSE, strap and buckle. When removed, the large-capacity bags
FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and FXSTD). Also leave behind two simple, inconspicuous docking points. The
fits ’09 FXSTSSE models. FXSTC models require separate bags are compatible with both rigid and H-D® Detachables™
purchase of Hardware Kit P/N 90573-07. Fits ’84-’99 Softail accessories when installed with the appropriate docking hard-
models with separate purchase of Directional Relocation Kit ware kits. Luggage capacity: 2400 cubic inches total.
P/N 53692-96. (FLST, FLSTC and FLSTS models do not 88306-07A
require this Directional Relocation Kit). (Does not fit ’84-’99 Fits ’07-’17 FLSTF, FLSTFB and FLSTFBS models. Models
models equipped with H-D® Detachables™ accessories). equipped with detachable accessories require separate
Does not fit with Rear Axle Covers, Wide Tire Kit P/N 43684- purchase of Docking Hardware Kit P/N 88256-07. Models
A. LOCKING LEATHER COVERED RIGID SADDLEBAGS
99 or Flat Lens Turn Signal Kit P/N 68431-95. FLSTFBS without detachable accessories require separate purchase of
models require the removal of Original Equipment Rear Axle Docking Hardware Kit P/N 53932-03A. Models equipped
Covers. with Rigid Accessories require separate purchase of Docking
Note: Installation of these saddlebags with the following seats Hardware Kit P/N 88298-07. All models require separate
requires the use of Spacer Kit P/N 90976-01A: seats with rider purchase of Rear Directional Relocation Kit P/N 69929-07 or
backrests, Sundowner™ seats, stock FLSTF seat, stock FLSTC, 73369-10. Does not fit with Passenger Footboards or Rear
FXSTC seat and any other seats that contact the lid of the Axle Covers. FLSTFBS models require the removal of Original
saddlebag. Spacer Kit not required if mounting with Harley- Equipment Rear Axle Covers.
E. H-D DETACHABLES LEATHER SADDLEBAGS – FAT BOY LACING
Davidson® Detachables Racks or Sideplates.
F. LEATHER SADDLEBAGS – FAT BOY STYLING
Carry your essentials in style with these premium heavy
B. LOCKING RIGID SADDLEBAGS – SOFTAIL DELUXE
leather saddlebags. They feature a reinforced tub and lid to
STYLING
retain their shape for the long haul, leather straps and chrome
Styled to complement the nostalgic look of the Softail Deluxe
buckles that hide quick-release clips. They are also highly
model, these saddlebags with pleated leather panels are
stylized with a leather embossed lid that features decorative
anything but traditional. The rigid core allows the bag to retain
chrome spots and Spanish lacing to match the ’07 Fat Boy®
its shape even after years of use. The hinged locking lid tilts
model. Luggage capacity: 1700 cubic inches total.
outward for easy access and the embossed weave pattern,
braided edging and chrome concho trim echo the Softail 88286-07
Deluxe seat and pillion for a coordinated look. Luggage capac- Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTC,
ity: 1900 cubic inches total. FLSTNSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and
FXSTD). Also fits ’09 FXSTSSE models. FXSTC models
53015-05B
require separate purchase of Hardware Kit P/N 90573-07.
Fits ’05-’17 FLSTN models. Does not fit FLSTNSE. Does not fit
Also fits ’84-’99 FLSTF, FXST, FXSTC and FXSTS models
with Rear Axle Covers.
B. LOCKING RIGID SADDLEBAGS – SOFTAIL DELUXE STYLING without H-D® Detachables™ accessories when installed with
Directional Relocation Kit P/N 53692-96. Does not fit with
SOFTAIL
C. HERITAGE SOFTAIL® MODEL SADDLEBAGS
Rear Axle Covers, Wide Tire Kit P/N 43684-99A or Flat Lens
Original Equipment on the ’06-’08 Heritage Softail Classic
Turn Signal Kit P/N 68431-95. FLSTFBS models require the
model, these top grade cowhide saddlebags feature rein-
removal of Original Equipment Rear Axle Covers.
forced rim and sides to help maintain their shape. The bags
are decorated with chrome studs and a chrome-plated brass
medallion coined with the Harley-Davidson logo. Saddlebag
G. UNIVERSAL SADDLEBAG LOCK KIT
Keep the contents of your existing soft-sided saddlebags safe
tops have rivet-reinforced corners and are secured with heavy
from the grab-and-go thief. This unique kit features two extra-
leather straps that conceal quick-release hardware. Luggage
small barrel locks that can replace existing saddlebag snaps
capacity: 2200 cubic inches total.
to perform double duty as locks or as snaps when you don’t
90876-05 need to lock your bags. Can be keyed to match your barrel-
Fits ’00-’17 FLSTC models. Also fits ’00-’17 FLST models style ignition key. Sold in pairs.
(except FLSTN, FLSTNSE, and ’10-’12 FLSTSE) with the
separate purchase of Saddlebag Hardware Kit P/N 79304-06. Fits most soft-sided leather and vinyl saddlebags. Does not fit
FLHRC and FLHRS.
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING 90300003 Keyed To Match.
F. LEATHER SADDLEBAGS – FAT BOY STYLING
Styled to complement the ’00-’06 Fat Boy® motorcycle with 90300017 Random Key Code.
the distinctive Fat Boy concho, wider is definitely better when
it comes to these bags, the widest available for Softail models.
Luggage capacity: 1550 cubic inches total.
90320-00D
Fits ’00-’17 Softail models (except FLS, FLSS, FLSTC,
FLSTNSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and
FXSTD). Also fits ’09 FXSTSSE models. FXSTC models C. HERITAGE SOFTAIL STYLE SADDLEBAGS
require separate purchase of Hardware Kit P/N 90573-07.
Also fits ’84-’99 FLSTF, FXST, FXSTC and FXSTS models
without H-D Detachables accessories when installed with
Directional Relocation Kit P/N 53692-96. Does not fit with
Rear Axle Covers, Wide Tire Kit P/N 43684-99A or Flat Lens
Turn Signal Kit P/N 68431-95. FLSTFBS models require the
removal of Original Equipment Rear Axle Covers.
NOTE: Some Harley-Davidson® saddlebags are made of NOTE: Some Harley-Davidson® saddlebags are made of
leather. Fine leathers or other natural materials WILL gain leather. Fine leathers or other natural materials WILL gain
“character,” such as wrinkles or wear, with age. This is normal. “character,” such as wrinkles or wear, with age. This is normal.
A fine, aged patina and character wrinkles are a sign of the A fine, aged patina and character wrinkles are a sign of the
extremely high-quality materials used to construct your extremely high-quality materials used to construct your
saddlebags. The appearance of scars or marks on the leather saddlebags. The appearance of scars or marks on the leather
are a result of using natural leather panels and should not be are a result of using natural leather panels and should not be
thought of as an imperfection. Please use Harley-Davidson® thought of as an imperfection. Please use Harley-Davidson®
Leather Protectant P/N 93600034 to protect your investment. Leather Protectant P/N 93600034 to protect your investment.
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING G. UNIVERSAL SADDLEBAG LOCK KIT
166 CRUISER CRUISER 167
Saddlebags & Luggage Saddlebags & Luggage
A. HERITAGE SOFTAIL® CLASSIC QUICK-DETACH SINGLE-SIDED SWINGARM BAG
SADDLEBAG CONVERSION KIT Less is more. With enough room for the essentials, these styl-
Leave your baggage behind with this innovative set of quick- ish Swingarm Bags eliminate the need to stuff your pockets
detach hardware. This kit converts your Original Equipment or bungee a bag across the passenger pillion. Shaped to hug
fixed-mount Heritage Softail® Classic saddlebags to bags that the contour of your bike’s frame, these compact bags add an
can be removed in just seconds. Just reach inside the bag, pull old-school look. Bags are constructed of heavyweight leather
and twist the locking handle and slide the bags off. You’re left and feature a pouch-style flap lid that is secured with two
with a clean, stripped-down custom look that’s ready to prowl. traditional straps and buckles. The semi rigid-backed bag is
Exclusive 3-point mounting system distributes the load to secured to the left side of the bike with easy-to-install adjust-
minimize flex and bounce and retains the Original Equipment able straps. Luggage capacity: 450 cubic inches total.
weight capacity.
90200641A C. SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN
Fits ’03-’17 FLSTC models equipped with Original Equipment LEATHER
Heritage Softail Classic saddlebags. Installation requires Crafted from supple brown pull-up leather, this classic
separate purchase of appropriate Docking Hardware Kit. Swingarm Bag will gain character and a well-worn authen-
Models equipped with detachable accessories and tic look with use. The flip-open lid is secured with traditional
saddlebags require Docking Kit P/N 90200670. Does not fit straps and buckles, and the bag features antique hardware
with Passenger Footboards, Rear Saddlebag Guards or Rear that complements the old-school look.
Axle Covers. 90201568
Fits ’00-later Softail® models (except FLSTC, FLSTNSE,
Also available: FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
DOCKING HARDWARE KIT equipped with left-hand tool box, passenger footboards,
Required for installation of Quick-Detach Saddlebag Kit chrome swingarm covers, saddlebags, or saddlebag guards.
P/N 90200641 on FLSTC models.
A. HERITAGE CLASSIC QUICK-DETACH SADDLEBAG CONVERSION KIT C. SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN LEATHER
90200670 With Detachable Accessories. D. SINGLE-SIDED SWINGARM BAG – BLACK LEATHER
Fits ’03-’17 FLSTC models equipped with Quick-Detach Constructed with heavy boot-grade leather, this rich black
Saddlebag Kit P/N 90200641A and detachable accessories. Swingarm Bag is the perfect complement to any paint color
or customizing style. The flip-open lid is secured with quick-
B. HERITAGE FLAT TOP & LOCK KIT disconnect clips hidden behind the traditional leather straps
Unique saddlebag structure incorporates a barrel-style lock to and brushed nickel-finished buckles.
secure your Heritage Softail Saddlebags and offers an unob- 90201567
trusive internal reinforcement bracket that adds rigidity and Fits ’00-later Softail models (except FLSTC, FLSTNSE,
preserves the original shape after extended periods of expo- FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models
sure to the weather. A custom-shaped plastic inner lid mounts equipped with left-hand tool box, passenger footboards,
easily to the inside of the leather lid to add additional support. chrome swingarm covers, saddlebags, or saddlebag guards.
Barrel-style locks are sold separately and can be ordered
keyed to match your ignition switch. Kit includes reinforce E. BLACK STANDARD LINE SWINGARM BAG
ment bracket, plastic inner lid and all necessary installation Made of ultra-durable leather-like synthetic featuring a
hardware for the left and right side bags. debossed H-D #1 logo, the Black Standard Collection Bags
88373-10A have a simple, black on black style that complements many
styling directions and budgets. An internal reinforcement
SOFTAIL
Fits ’00-’15 FLSTC Original Equipment saddlebags and
Heritage Style Saddlebag Kit P/N 90876-05. Requires system maintains the bag’s shape over time. The “MOLLE-
separate purchase of Keyed-to-Match Barrel Lock Kit P/N style” system of mounting loops accommodate hook and loop
90300010. See instruction sheet for additional installation straps and allow for multiple mounting locations and orienta-
supplies required. tions. The bags feature either matte black enamel buckles with
hidden quick-detach snaps or a hook and loop flap closure.
Also available: This Swingarm Bag features matte black buckles with hidden,
LOCKSET – KEYED TO MATCH quick-release buckles underneath. Straight and perpendicu-
Barrel style lock kit includes 2 locks and 2 keys. lar mounting loops provide versatile and easy mounting. This
90300010 bag is great for storing a small set of tools or additional layers
For use with Heritage Flat Top & Lock Kit P/N 88373-10A. of riding gear. Bag dimensions: 11" W x 11" H x 3.25" D. Internal
capacity: 250CI. Weight/Carrying Capacity: 5 lbs.
90201768
Fits ’00-’17 Softail models (except FLSTC, FLSTNSE, FLSTSE,
FXCW, and FXCWC models). Does not fit models equipped
A. HERITAGE CLASSIC QUICK-DETACH SADDLEBAG CONVERSION KIT D. SINGLE-SIDED SWINGARM BAG – BLACK LEATHER with rear axle covers, left-hand tool box, passenger
footboards, chrome swingarm covers or saddlebag guards.
FLSS and FLSTFBS models require removal of Original
Equipment Rear Axle Covers.
SOFTAIL
E. H-D DETACHABLES SOLO TOUR-PAK LUGGAGE
MOUNTING RACK
Install the Sport or Leather Tour-Pak carrier in a comfortable
back-supporting position. The rack is designed to position the
Tour-Pak Luggage for solo riding and is adjustable over a .75"
range. Simply remove the Tour-Pak Luggage from the conve-
nient detachable hardware, add a Passenger Pillion and the
bike is ready for two-up riding. Tour-Pak, Passenger Backrest
Pad and Docking Hardware sold separately.
53559-04B
Fits ’00-’05 Softail models (except FXSTD). Fits ’06 FLST,
FLSTF and ’06-’17 FLSTC, FLSTN, FLSTSC models. Designed
to accept Color-Matched Sport Tour-Pak or Leather Tour-Pak
D. H-D DETACHABLES TWO-UP TOUR-PAK LUGGAGE MOUNTING RACK Luggage System. Requires separate purchase of appropriate
(SHOWN WITH HERITAGE SOFTAIL CLASSIC TOUR-PAK) Docking Hardware. Some models require separate purchase
of Directional Relocation Kit. See matrix for specific
application. Some EU registration plates may interfere with
the Tour-Pak Rack. Models with rear fender tip trim can be
adapted with the separate purchase of License Plate
Relocation Kit P/N 60095-00A.
SOFTAIL
33876-07 34016-08 Satin Black.
Fits ’86-’17 FL Softail, ’88-’16 Touring and ’08-’16 Trike
models. H. HALF-MOON RIDER FOOTBOARDS
The traditional Harley-Davidson® rubber insert features a
D. HEEL/TOE SHIFTER SHAFT COVER vibration-isolation design for a long, comfortable ride. Kit
Conceal the splined end of the shifter shaft when you remove includes left and right footboard pans and matching rubber
the heel shift lever. The easy-to-install chrome-plated alumi- inserts.
num billet cap is held in place with a flush Allen® screw for a
Fits ’86-’17 FL Softail models.
clean look.
51345-08 Polished Stainless Steel.
35471-05
Fits ’82-’17 FL Softail®, and ’82-later Touring and Trike 51400-08 Gloss Black.
models equipped with heel/toe shift levers. Installation
requires removal of heel shift lever. I. RIDER FOOTBOARD HEEL GUARD
This Heel Guard mounts to the right-side rider footboard and
E. HEEL/TOE SHIFTER SHAFT COVER WITH INSERT protects your boot from contact with the hot exhaust shield.
Conceal the splined shifter shaft when you remove the heel Kit includes chrome guard with cutaway Bar & Shield logo and
shift lever. The kit includes a cover for the shaft end and an all mounting hardware.
insert that conceals the casting and nylon spacer inboard of 50500225
the shift lever. Manufactured from billet aluminum, these easy- Fits ’12-’16 FLD, ’86-’17 FL Softail, ’86-later Touring and ’09-
to-install chrome-plated covers are held in place with flush later Trike models equipped with Traditional and Swept Wing
Allen screws for a clean appearance. footboards. Does not fit models equipped with Half-Moon,
35495-06 B. BILLET STYLE HEEL/TOE SHIFT LEVER – C. FOLDING HEEL SHIFTER G. BILLET STYLE SHIFT LEVER – H. HALF-MOON RIDER FOOTBOARDS Tapered, Airflow, Defiance, Dominion™ or Burst footboards,
Fits ’00-’17 FL Softail models (except FLSTSE) equipped with STANDARD LENGTH, SATIN BLACK SATIN BLACK Extended Reach Rider Footboards P/N 50409-04 or 54145-
heel/toe shift levers. Installation requires removal of heel 10, Rider Running Boards P/N 50500158 or Screamin’ Eagle®
shift lever. Fat Exhaust Shield.
D. HEEL/TOE SHIFTER SHAFT COVER E. HEEL/TOE SHIFTER SHAFT COVER I. RIDER FOOTBOARD HEEL GUARD
WITH INSERT
172 CRUISER CRUISER 173
Foot Controls Foot Controls
A. GEAR SHIFTER LINKAGE COVER D. PASSENGER FOOTPEG MOUNT KIT
A simple and inexpensive way to detail your Softail® model. A necessary addition when converting your solo seat model to
This easy-to-install chrome-plated cover conceal the stock a two-up passenger-carrying ride. Kit includes black mount-
shifter linkage for a brilliant finish. Kit includes all necessary ing brackets and all necessary mounting hardware. Footpegs
mounting hardware. sold separately.
46302-01 Harley-Davidson Script. 50932-08
Fits ’99-’17 Softail® models (except FLSTSE) with stock Fits ’12-’17 FLS, FLSS and ’08-’11 FLSTSB models.
shifter linkage.
E. PASSENGER FOOTBOARD AND MOUNT KITS
B. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS Add passenger comfort and support. These complete kits
BLACK include specially designed mounting stud/brackets for conve-
Add the finishing touch to your blacked-out ride. This Gloss nient bolt-on installation. Footboards fold up when not in
Black Shift Linkage is easy to install and includes a transmis- use. Available in your choice of Original Equipment or mirror-
sion lever cover and decorative acorn nuts and bolts for a chrome finish, these kits include footboard pans, rubber pads,
complete custom look. mounting hardware and matching chrome or black footboard
33600259 A. GEAR SHIFTER LINKAGE COVER – HARLEY-DAVIDSON SCRIPT supports. NOTE: Passenger Footboard Kits cannot be used
Fits ’86-later Softail (except ’18-later FXBB, FXLR, FXLRS and with Pivot Bolt Covers.
’20-later FXST), Touring and Trike models. (Does not fit ’97- Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTF, FLSTFB,
’99 FLSTS or models equipped with Softail Extended Reach FLSTFBS, FLSTN, FLSTNSE, FLSTS, FLSTSB, FLSTSC, FLSTSE,
Forward Controls.) FXS, FXSBSE, FXCW, FXCWC and FXSTD). ’00-’15 FLSTC
models require Saddlebag Bracket Relocation Kit P/N
C. CUSTOM GEAR SHIFT LINKAGES 90238-00.
Kick your custom into gear with this collection of high-qual-
ity custom shift linkages. Available in a variety of designs to 50602-00A Black.
D. PASSENGER FOOTPEG MOUNT KIT
match your bike’s style, these linkages feature aircraft-qual- 52715-04A Chrome.
ity rod ends for easy adjustment and smooth operation. The
easy-to-install linkage kit also includes a transmission lever F. PASSENGER FOOTBOARD SUPPORT KITS
cover for ’86-’17 Softail and ’86-’16 Touring and Trike models, Add the comfort and convenience of passenger footboards
and decorative acorn nuts and bolts for a complete custom to your Softail motorcycle. These support kits are designed
look. to allow installation of traditional D-shaped, Swept Wing,
Tapered or Old-Style Passenger Footboards (sold separately)
Fits ’86-later Softail (except ’18-later FXBB, FXLR, FXLRS and on Softail models. Kit includes left and right supports, foot-
’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 board mount hinge pins and installation hardware.
FLSTS or models equipped with Softail Extended Reach
Forward Controls.) Fits ’00-’17 Softail models (except FLS, FLSS, FLSTF, FLSTFB,
1. 34018-08 Slotted Black Anodized. FLSTFBS, FLSTN, FLSTNSE, FLSTS, FLSTSB, FLSTSC,
FLSTSE, FXS, FXSBSE, FXCW, FXCWC and FXSTD). ’00-’15
2. 34850-09 Skull. FLSTC models require Saddlebag Bracket Relocation Kit P/N
3. 33801-09 Harley-Davidson Script. 90238-00.
4. 33760-09 Slotted with Bar & Shield Logo. 50459-06 Black.
B. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS BLACK
5. 33814-98A Round. 50460-06 Chrome.
SOFTAIL
Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FXS and FXSTD models.
50399-07A Black.
E. PASSENGER FOOTBOARD AND MOUNT KIT – E. PASSENGER FOOTBOARD AND MOUNT KIT –
2
BLACK CHROME
C. CUSTOM GEAR SHIFT LINKAGES F. PASSENGER FOOTBOARD SUPPORT KIT – F. PASSENGER FOOTBOARD SUPPORT KIT –
BLACK (50459-06 SHOWN) CHROME (50460-06 SHOWN)
174 CRUISER CRUISER 175
Foot Controls Engine Guards
A. MINI FOOTBOARD KITS E. MUSTACHE ENGINE GUARD*
Fits rider position: Combine classic shape and modern function for a unique twist
’02-’17 VRSC™ models with forward controls (except on engine protection. The flow of this engine guard comple-
VRSCDX and VRSCF), ’06-earlier XL, ’07-’10 XL883, XL883C, ments the bike’s traditional style while the gracefully curved
XL883R, XL1200C and XL1200R, ’07-’11 XL1200L, ’91-’17 upper section incorporates highway pegs into the shape. The
Dyna® (except FLD), and ’84-’17 Softail® models with forward integrated rubber pads offer a comfortable and slip-resistant
controls (except FXCW, FXCWC, FXS, FXSB, FXSBSE and cushion for your feet while traveling the open road. One-piece
FXSE). 3" Chrome engine guard kit includes all required mounting hardware.
4" Chrome
Fits passenger position: Fits ’00-’17 FL Softail® models.
All models with H-D® male-mount passenger peg mounts 49140-05B Chrome.
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier 49440-10 Gloss Black.
Dyna and Softail models equipped with Shotgun exhaust).
’84-’17 Softail models require separate purchase of Support F. ENGINE GUARD – CHROME*
Kit PN 50454-09. Does not fit passenger position on ’18-later Protect your bike without sacrificing ground clearance or style.
Softail models. The one-piece engine guard is designed to complement the
Fits highway peg position: lines of the motorcycle and the bright chrome finish adds the
All models with frame-mount or engine guard-mount perfect finishing touch.
highway pegs (except Whiskers Adjustable Highway Bar 49004-00A
P/N 50855-09 and 50865-09). 3" Gloss Black Fits ’00-’17 FL Softail models.
50500139 Small 3" – Chrome. 4" Gloss Black 49200-07A
50500144 Small 3" – Gloss Black. Fits ’00-’17 FX Softail models (except models equipped with
50500109 Large 4" – Chrome. Extended Reach Forward Control Kit P/N 49171-04 or 49223-
A. MINI FOOTBOARD KIT E. MUSTACHE ENGINE GUARD – CHROME E. MUSTACHE ENGINE GUARD – GLOSS BLACK 04). FXSE models require the removal of the stock Original
50500124 Large 4" – Gloss Black.
Equipment Chin Spoiler.
Also available: 49004-90
PASSENGER FOOTBOARD SUPPORT KIT Fits ’86-’99 FL Softail models.
Required for installation of Mini Footboards in the passenger
position on many Softail motorcycles. G. ENGINE GUARD – GLOSS BLACK*
A serious finish for serious riders. Before a black powder coat,
50454-09
these engine guards get an extra layer of protection from an
Required for installation of Mini Footboards P/N 50451-09,
E-Coat dip. So go on and install Engine Guard Mount Footpegs
50500109, 50500124, 50500139, 50500144 on ’08-’17
because this finish will go the distance.
Softail models. Does not fit FLS, FLSS, FLSTF, FLSTFB,
FLSTFBS, FLSTN, FLSTSB, FXS, FXSBSE, FXSTD and Softail 49023-02A
models with shotgun exhaust. FLSTC and FLSTS models Fits ’00-’17 FL Softail models.
require the separate purchase of Saddlebag Bracket
Relocation Kit P/N 90238-00. H. NOSTALGIC CURVED ENGINE GUARD – CHROME*
The nostalgic curved shape adds classic style to function-
B. WHISKERS ADJUSTABLE HIGHWAY BAR* ality. Reminiscent of the vintage 1940s style, the one-piece
Fits ’00-’17 Softail® models (except FXCW, FXCWC, FXS, FXSB, chrome Engine Guard complements the lines of the classic
SOFTAIL
FXSBSE and FXSE) without ABS. Also fits ’14-’15 FLSTNSE style Softail Deluxe, Heritage Softail® Classic and FL Springer™
when Original Equipment engine guard is removed. Does models.
not fit with Boom!™ Audio Cruiser Amp and Speaker Kit 49037-05A
P/N 76262-08A, 76320-08A, 76321-09A, Heel Raiser Footpeg Fits ’00-’17 FL Softail models. Compatible with Engine
Kit P/N 50178-09 or Mini Footboard Kits P/N 50500109, Footpeg Mount Kit P/N 49102-86T or 49144-86.
50500124, 50500139, 50500144 or 50451-09.
50855-09 Chrome. I. SOFT LOWERS
50865-09 Gloss Black. Extend your riding season. Full-coverage Soft Lowers provide
wind and mud protection for the rider’s legs and boots and
C. REAR SADDLEBAG GUARDS – CHROME* minimize cold updrafts as the weather changes. Covers are
Saddlebag guards provide a style borrowed from the past that custom shaped to hug the engine guard to minimize flap-
makes a unique statement here and now. Includes mounting ping and they simply clip in place for speedy installation as
hardware and instructions. the weather changes. Two-way zippered outer edge accom-
modates guard-mounted highway pegs in almost any posi-
49261-00A tion. Reflective piping provides added visibility and the rigid
B. WHISKERS ADJUSTABLE HIGHWAY BAR – B. WHISKERS ADJUSTABLE HIGHWAY BAR F. ENGINE GUARD – CHROME G. ENGINE GUARD – GLOSS BLACK
Fits ’00-’17 FLST and FLSTC and ’00-’05 FXST, FXSTB and inner panel provides ample clearance around the foot controls.
GLOSS BLACK
FXSTS models. FLSTC models require Saddlebag Relocation
57100213
Kit P/N 90238-00.
Fits ’86-’17 FL Softail models equipped with Engine Guard
Also available: P/N 49004-90 or 49004-00A. Does not fit Mustache or
SADDLEBAG BRACKET RELOCATION KIT (not shown) Nostalgic Engine Guards. Does not fit models with forward
Required for installation of FLSTS Rear Saddlebag Guards P/N controls, Extended Reach Brake Lever or Extended Reach
49258-00A and FLSTC Rear Saddlebag Guard P/N 49261-00. Shift Lever.
90238-00
Fits ’00-’17 FLSTC, FLSTS and FLSTSB models.
C. REAR SADDLEBAG GUARDS – CHROME D. ERGO JIFFY STAND H. NOSTALGIC CURVED ENGINE GUARD – I. SOFT LOWERS
(49261-00A SHOWN) CHROME
176 CRUISER CRUISER 177
Chassis Trim – Front End Suspension
A. FRONT END KIT – CHROME D. PROFILE® LOW FRONT SUSPENSION*
The front forks on a Harley-Davidson® motorcycle set the Designed by Harley-Davidson to lower the front fork approx-
tone for the bike and can lead the way to a full-bore custom imately 1.0" while preserving ride quality. The kit includes
statement. So start customizing by adding chrome where it springs that are progressively wound for a compliant, yet
will have the most noticeable impact on the overall look of the controlled ride. Must only be installed on vehicles equipped
bike, the front end. A perfect addition during the installation of with low-profile rear suspension.
Premium Ride or Profile® Low Front suspension components, 54758-07
this kit includes components necessary to completely chrome Fits ’07-’17 FLS, FLSS, FLSTC and FLSTN, ’08-’17 FLSTF,
the front forks. Kit includes some or all of the following (Kit FLSTFB, FLSTFBS and ’14-’17 FLSTNSE models. FLSTC, FLS
components vary depending on your model): Chrome Fork (AUS/BRZ/APC), FLSTF and FLSTF Special (Europe/UK)
Sliders, Oil Seals, Chrome Fork Axle Retainer Nut Kit, Chrome models must also be equipped with Profile® Low Rear
Fork Slider Drain Screw Kit, Classic Chrome Front Axle Nut Suspension Kit P/N 54651-05, 54652-05 or 54001-04A.
Cover Kit and Chrome Upper Fork Nut Covers. Chrome Front
End Package price does not include labor or supplies. E. REAR LOWERING KIT*
45400006 Provides low cost alternative to buying complete shocks. This
Fits ’12-’17 FLS, FLSS, FLSTF, FLSTFB and FLSTFBS, kit is for the rider who simply wants to lower his or her bike
’09-’17 FLSTC and ’07-’17 FLSTN models. Also fits ’07-’08 inexpensively and have some ride height adjustability. Kit will
FLSTC with separate purchase of front fork cover lower seat height up to 1.0".
P/N 67830-09. 54001-04A
Fits ’00-’17 Softail® models (except FLS, FLSS, FLSTFB,
B. LOWER FORK SLIDERS – CHROME FLSTFBS, FLSTFSE, FLSTN, FLSTNSE, FLSTSB, FLSTSE,
Competitively priced, these chrome-plated Lower Fork FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD and
Sliders give your bike upfront style. To ensure proper fitment FXSTSSE). Also fits ’12-’17 FLS models in AUS, BRZ and APC
and function, these sliders are manufactured from Original markets. Does not fit models equipped with Profile Lowering
A. FRONT END KIT – CHROME (FAT BOY SHOWN) D. PROFILE LOW FRONT SUSPENSION –
Equipment components. Form follows function, with polished, Kits P/N 54651-05, 54588-94 or 54652-05.
FL SOFTAIL
chrome plating and a stamped Harley-Davidson logo for prod-
uct identification. A perfect addition during the installation of F. PROFILE LOW REAR SUSPENSION*
Premium Ride or Profile Low Front suspension components, This suspension lowers the seat height approximately .75"
this kit includes right and left sliders and the bottom axle while preserving ride quality. Spring and damping rates are
retainer. ’07-later model kits also include chrome drain screws, tailored for Softail models to ensure a controlled ride. Shocks
axle retainer bolts and oil seals. feature multi-staged damping to ensure optimal performance
45500014 under varying conditions. Compatible with Profile Low Front
Fits ’07-’17 FLS, FLSS, FLSTC and FLSTN and ’08-’17 FLSTF, Suspension.
FLSTFB and FLSTFBS models. 54651-05 Chrome.
46482-00 Fits ’00-’17 FLSTC, FLSTB, FLSTF, FLSTS, FXST, FXSTB,
Fits ’00-’06 FLST, FLSTC, FLSTF and FLSTN models. FXSTC and FXSTS models. Also fits ’10-’17 Fat Boy® Special
45310-98 model in UK, Europe, Brazil and select international markets
Fits ’86-’99 FLSTC, FLSTF and FLSTN models. that are factory-equipped with standard-height rear
46477-00 suspension.
Fits ’00-’05 FXDWG and ’00-’06 FXST and FXSTB models.
SOFTAIL
G. COMFORT FLEX REAR SHOCKS*
Also available: For the rider willing to exchange the low-profile, slammed look
FRONT FENDER HARDWARE KIT – CHROME for improved ride comfort. Standard-length shocks raise the
Finish the show-winning look with brilliant chrome hardware. seat height of a factory-lowered bike approximately 1.0" and
Manufactured to Original Equipment specifications, this kit deliver an improved ride through a longer stroke. Spring rates
replaces the zinc-plated exposed front fender mounting bolts and damping are tailored to ensure a controlled ride and opti-
with chrome-plated socket head cap screws. mal performance under varying conditions.
94415-05 54000041
Fits ’93-’05 FXDWG and ’91-’17 Softail® models (except Fits ’05-’17 FLS, FLSS, FLSTFB, FLSTFBS, FLSTN, FLSTNSE,
Springer™, FXCW, FXCWC, FXSB, FXSBSE, FXSE and FXSTD). ’05-’06 FLSTFSE, ’08-’11 FLSTSB, ’10-’12 FLSTSE, ’07-’09
Does not fit with Billet Fork Slider Kit or Inverted Front End FXSTSSE, ’03 FXSTDSE, ’04 FXSTDSE and ’07 FXSTD. Stock
Kit. on ’00-’17 FL and FX models equipped with standard height
rear shocks. Cannot be used on models equipped with Profile
C. LOWER FORK SLIDERS – GLOSS BLACK Low Front Suspension Kits.
These gloss black coated sliders are the ultimate extension B. LOWER FORK SLIDERS – CHROME E. REAR LOWERING KIT F. PROFILE LOW REAR SUSPENSION – CHROME
of your bike’s “dark side” and make a perfect custom addition
to your blacked-out FL Softail® model. Manufactured to
Original Equipment specifications, the durable black coating is
a great match to other H-D® black components. Add matching
Gloss Black Upper Fork Slider Covers P/N 45591-02 for a
complete look. A perfect addition during the installation of
Premium Ride or Profile Low Front suspension components,
this includes right and left sliders, bottom axle retainers, drain
screws, axle retainer bolts and oil seals.
45500015
Fits ’07-’17 FLS, FLSS, FLSTC, FLSTN and FLSTNSE, ’08-’17
FLSTF, FLSTFB, FLSTFBS and ’10-’12 FLSTSE models.
SOFTAIL
45963-97 93500006
Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF Fits ’02-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS,
(except ’07), FLSTFB, FLSTFBS and FLSTN and ’80-’13 ’95-later FLHR and FLHRC, ’95-’13 FLHT, FLHTC and FLHX,
Touring and Trike models. Stock on FLSTNSE and FLSTSE ’10-’13 FLHTCU and FLHTK , ’10-’12 FLHXSE and ’10-’12
models. FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models
without a windshield require separate purchase of Hardware
E. UPPER FORK SLIDER COVERS – GLOSS BLACK Kit P/N 91800030.
The classic Harley-Davidson® motorcycle color is black. It
shows your attitude, your feelings and your desire to be Shown with:
different from the rest. These gloss black accessories are TIE-DOWN BRACKET HARDWARE KIT
the ultimate extension of the Harley-Davidson philosophy. Kit includes 4 button-head bolts required for installation
Manufactured from Original Equipment components, these of Chrome Tie-Down Brackets P/N 93500006 on specified
parts provide superior fit and finish. models.
45591-02 91800030
Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF J. FORK COVER SIDE PANELS – CHROME K. FORK COVER ACCENT STRIP KIT – CHROME Required for installation of Chrome Tie-Down Bracket Kit P/N
(except ’07), FLSTFB, FLSTFBS, FLSTNSE and FLSTN, ’10-’12 93500006 on ’00-’17 FLS, FLSS, FLSTF, FLSTFB and
FLSTSE and ’80-’13 Touring and Trike models. FLSTFBS models without windshields.
F. TEARDROP FRONT FORK ROCKER COVER KIT M. FORK COVER ACCENT STRIPS – GLOSS BLACK
Nostalgic chrome-plated styling that seems to be in constant These strips are designed to add the ultimate complement to
motion. Easily installs on Heritage Springer™ models without the Gloss Black Fork Cover Kit. Finished in matching rich black,
removing wheel. these extruded aluminum pieces fill the gap between the front
43161-97 E. UPPER FORK SLIDER COVERS – F. TEARDROP FRONT FORK and rear covers that is created when the passing lamps are
Fits ’97-’03 FLSTS and ’05-’07 FLSTSC models. GLOSS BLACK ROCKER COVER KIT removed. Strips are sold individually and two are required for
a complete installation.
G. ABS FRONT WHEEL SPACERS 68055-10BHP
It is all in the details. Complete your total front end with these Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
wheel spacers in mirror chrome finish. Manufactured to the FLSTFBS ’93-’96 FLSTN models with Gloss Black Fork Cover
Original Equipment tolerances, they deliver the exact fitment Kit P/N 48608-09. (Does not fit with passing lamps or
and custom shine. Chrome is Original Equipment on FLSTNSE windshields.)
43300010 Chrome.
Shown with:
Fits ’11-’17 FLS, FLSS, FLSTF, FLSTC and FLSTN models with
ABS brakes. FLSTC and FLSTN models require removal of HEADLAMP SHELL – GLOSS BLACK
Original Equipment hub cap. Add to the sinister look of your blacked-out Softail® motor-
cycle. Manufactured from Original Equipment components,
H. ABS HARNESS COVER – CHROME this gloss black headlamp housing replaces the chrome head-
Dress your ABS-equipped Softail model in style. Shaped to lamp shell for a custom look. Shell includes wiring harness
conceal the ABS wheel speed sensor harness, this bracket and connector and accepts the Original Equipment headlamp,
mounts to the brake caliper tabs on the lower fork sliders. The trim ring and mounting hardware.
mirror chrome finish complements the Original Equipment 73294-10
satin polished sliders or serves as the final finishing touch to a Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and
complete chrome front end. FLSTFBS and FLSTN models in domestic and right-hand
32700002
drive markets.
Fits ’11-’17 Softail® models (except FXCWC, FXSB and
FXSBSE) equipped with ABS.
G. ABS FRONT WHEEL SPACERS – CHROME H. ABS HARNESS COVER – CHROME L. TIE-DOWN BRACKETS – CHROME M. FORK COVER ACCENT STRIPS –
GLOSS BLACK
180 CRUISER CRUISER 181
Chassis Trim – Front End Chassis Trim – Front End
FRONT AXLE NUT COVERS C. DOMINION™ COLLECTION FORK NUT COVERS
Cover the front axle in style. Available in your choice of Top it off with style. These easy-to-install Fork Stem Covers top
styles, these custom Axle Nut Covers look great with Original of the triple tree for a cohesive look. A perfect complement
Equipment satin-finish fork sliders or add the finishing touch to other Dominion™ Collection Accessories, these Fork Nut
to a complete chrome or blacked-out front end. Easy-to-install Covers provide the finishing touch to your bike’s front end.
kits include all necessary mounting hardware. Sold in pairs. Sold in pairs.
Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-’20 Fits ’06-’17 Dyna® models (except FXDB and FXDSE) and
XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except ’18-later Softail® models (except FXDRS, FXFB, FXFBS,
Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXLRS, FXLRST and FLSB). Also fits ’88-’13 XL (except
FXST-Aus, and FXSTD) and ’08-later Touring and Trike models. XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL,
’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, ’16-later FXDLS, ’94-’05 FXDS-CONV, ’90-’17 FLS, FLSS, FLSTF,
FXBBS, FXBR, FXBRS and FXLR models require separate FLSTFB, FLSTFBS and FLSTN, and ’86-’17 FLSTC models.
purchase of Front Axle Adapter Kit P/N 43000090. ’19-’20 45800117 Gloss Black.
FXDRS, ’18-later FXFB and FXFBS and ’20-later FXLRS and
FXLRST models. require separate purchase of Front Axle D. DEFIANCE COLLECTION UPPER FORK STEM COVERS
Adapter Kit P/N 43000159. A. DOMINION FRONT AXLE NUT COVERS – A. DOMINION FRONT AXLE NUT COVERS – Top it off with style. These easy-to-install Fork Stem Covers
GLOSS BLACK BRONZE continue the Defiance Collection to the top of the triple tree
A. DOMINION™ COLLECTION for a cohesive look. The deep radial grooves define the style
Express your bold, renegade attitude. The machined alumi- of the Defiance Collection, and the choice of chrome, black
num Dominion™ Collection Front Axle Nut Covers add style to or machine cut finishes complement your bike’s polished,
the front of the bike and are the perfect complement to other chrome or blacked-out front end components. Sold in pairs.
Dominion Collection accessories.
43000124 Gloss Black. Fits ’06-’17 Dyna models and ’18-later Softail models (except
C. DOMINION FORK NUT COVERS – GLOSS BLACK FXDRS, FXFB, FXFBS, FXLRS, FXLRST and FLSB). Also Fits
43000123 Bronze. ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05
3 FXD, ’93-’05 FXDL, ’16-later FXDLS, ’94-’05 FXDS-CONV and
B. FRONT AXLE NUT COVERS ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and
1. 44117-07A Chrome – Die-cast. ’86-’17 FLSTC models.
44116-07A Chrome – Billet. 45500514 Chrome.
2. 43000026 Gloss Black – Die-cast. 45500515 Gloss Black.
43428-09 Gloss Black – Billet. 2
45500516 Black Machine Cut.
3. 43000177 H-D Motor Co. – Black.
4. 44148-07A H-D Motor Co. – Chrome. E. UPPER FORK NUT COVERS – CHROME
5. 44114-07 Aluminator. Highlighted with a unique Bar & Shield logo, these polished
triple chrome-plated covers add an additional clean looking
Also available: 1 appearance to your upper fork. Kit comes complete with three
covers, mounting hardware and wrench for easy, on-the-spot
Willie G Skull installation.
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later
XG, ’08-later XL (except ’16-later XL1200X and XL1200XS), 46129-98B
Fits ’06-’17 Dyna models (except FLD, FXDB and FXDSE),
SOFTAIL
’08-‘17 Dyna, ’07-later Softail (except Springer, FLSTNSE,
FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) ’88-’13 XL (except XL883C, XL1200C and XL1200S), ’95-’05
and ’08-later Touring and Trike models. ’18-later FLDE, FLFB, FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV and
FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and
6
and FXST models require separate purchase of Front Axle ’86-’17 FLSTC models.
Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS,
’19-later FXDRS and ’18-later FXFB and FXFBS models require
separate purchase of Front Axle Adapter Kit P/N 43000159.
6. 43000096 Black.
7. 43163-08A Chrome.
Brass Collection
5
8. 43000046
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later XG,
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08- D. DEFIANCE COLLECTION UPPER FORK STEM D. DEFIANCE COLLECTION UPPER FORK STEM
’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB, COVERS – CHROME COVERS – GLOSS BLACK
FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE,
FXSE, FXST-Aus, and FXSTD) and ’08-later Touring and Trike 4
models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL,
FXBB, FXBR, FXBRS, FXLR and FXST models require
separate purchase of Front Axle Adapter Kit P/N 43000090.
’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS and ’18-
later FLSB, FXFB and FXFBS models require separate
purchase of Front Axle Adapter Kit P/N 43000159.
B. FRONT AXLE NUT COVERS D. DEFIANCE COLLECTION UPPER FORK STEM E. UPPER FORK NUT COVERS – CHROME
COVERS – BLACK MACHINE CUT
182 CRUISER CRUISER 183
Chassis Trim – Brakes Chassis Trim – Brakes
1
A. BRAKE BLEEDER AND BANJO BOLT COVERS F. BRAKE CALIPER KIT – RED
Dress your bike in the latest high-performance look. Brilliant
1. Brake Bleeder Screw Cover
red calipers make a powerful visual statement and set your
This cover adds chrome to the unfinished bleeder valve on all bike apart from the ordinary. Manufactured from Original
stock H-D® calipers. Package of two. Equipment components for proven performance, these cali-
43834-98 2 pers will add a stylish touch to the stock bike or add the
Fits ’84-later stock calipers (except XG and XR models). perfect finish to a complete custom equipped with chrome or
blacked-out wheels, rotors and fork sliders.
2. Chrome Banjo Bolt Cover
Die-cast chrome cover provides a custom look to your stock 41300152 Front – Single Disc.
banjo bolts. Fits banjo bolts on front and rear brake master Fits ’15-later Softail® models (except FXLRS, FXDRS, FXFB,
cylinders and front and rear calipers. Installs in seconds. FXFBS, FXSE). Kit includes brake pads.
32715-98
Fits ’84-later models with stock master cylinders and G. BRAKE CALIPER KIT – CHROME
calipers. (Does not fit VRSC™ Rear Master Cylinder, ’06-’17 Add the shine of chrome to your front end with this highly
VRSC calipers, ’15-later XG, ’04-later XL, or ’08-later Dyna®, polished Chrome Front Brake Caliper Kit. Manufactured from
Softail®, Touring and Trike models.) A. BRAKE BLEEDER AND BANJO BOLT COVERS Original Equipment components for proven performance,
these calipers are a great addition to the stock front end or
add the finishing touch to a complete custom with chrome
B. FORK AXLE RETAINER NUT KIT – CHROME
wheels, rotors and chrome fork sliders.
It’s the details that count. Complete the chrome transforma-
tion by adding this finishing touch to your chrome fork sliders. 41300148 Front – Single Disc.
This Axle Retainer Nut Kit includes the stylish chrome-plated Fits ’15-later Softail models (except FXDRS, FXFB, FXFBS,
nuts and chrome lockwashers necessary to replace the stock FXSE). Kit includes brake pads.
hardware. 44395-08 Front – Single Disc.
45813-03 F. FRONT BRAKE CALIPER KIT – RED Fits ’08-’17 Dyna® (except FXDF, FXDLS and ’14-’17 FXDL)
Fits ’91-’05 FXDWG, ’86-’07 FLST, FLSTC, FLSTF and FLSTN, (41300152 SHOWN) and ’08-’14 Softail models (except Springer) equipped with
’91-’07 FXST and FXSTB, and ’84-’13 Touring and Trike single disc front brakes. Brake pads sold separately.
models. 44395-00A Front – Single Disc.
Fits ’00-’03 XL, ’00-’07 Dyna and ’00-’07 Softail models
C. FORK SLIDER DRAIN SCREW KIT – CHROME (except Springer™) equipped with single disc front brakes.
It’s the details that count. Complete the chrome transforma- Brake pads sold separately.
tion by adding this finishing touch to your chrome fork sliders. 42047-08 Rear.
This Fork Slider Drain Screw Kit includes two chrome-plated Fits ’08-’17 Dyna and Softail models. Brake pads sold
drain screws and the seals required to replace the stock separately.
hardware.
45848-03 Shown with:
Fits ’93-’05 FXDWG, ’87-’17 Softail (except Springer™, FXCW, REAR CALIPER BRACKET – CHROME
FXCWC, FXSB, FXSBSE, FXSE and FXSTD) and ’87-’13 Complete a chrome rear brake conversion. This Rear Caliper
Touring and Trike models. Bracket sets your ride apart from the others by replacing the
painted black mount with brilliant chrome. Manufactured from
B. FORK AXLE RETAINER NUT KIT – CHROME C. FORK SLIDER DRAIN SCREW KIT – CHROME the Original Equipment components for exact fit, this mount
D. CUSTOM CALIPER BOLT COVER KIT
SOFTAIL
Cover your 12-point caliper bolts in chrome. These easy-to- will bolt to the existing mounting location.
install chrome covers are held firmly in place with a steel 42048-08 Fits ’08-’17 Softail models.
spring clip and are styled to match the Chrome Rocker Box
Bolt and Headbolt Covers.
40955-05 Four Large and Two Small Covers.
Fits ’00-later front brake calipers (except Springer models,
’06-later VRSC, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-
later Softail, ’08-later Touring and Trike and models equipped
with caliper covers). Also fits rear calipers on ’06-’17 Softail
models (except FXCW, FXSE).
40959-05 Three Large and Two Small Covers.
Fits ’00-later rear brake calipers (except Springer, ’06-later
VRSC, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-later
Softail, ’08-later Touring and Trike and models equipped with
caliper covers). Also fits rear calipers on ’06-’17 Softail G. FRONT BRAKE CALIPER KIT – CHROME G. FRONT BRAKE CALIPER KIT – CHROME
models (except FXCW, FXSE). (41300148 SHOWN WITH (44395-08 SHOWN WITH
CLASSIC CHROME CALIPER INSERT ) CLASSIC CHROME CALIPER INSERT)
E. BRAKE CALIPER INSERTS
Easy-to-install inserts add a finishing touch to the front and
rear brake calipers. Select a style that follows your custom
direction. Self-adhesive backing.
Fits ’00-later front and rear brake calipers on all models D. CUSTOM CALIPER BOLT COVER KIT
(except Springer front, ’06-later VRSC, ’15-later XG, ’04-later (40955-05 SHOWN)
XL, ’18-later Softail rear caliper, and ’08-later Touring and
Trike).
44477-99 Classic Chrome.
44476-99 Harley-Davidson Script.
E. BRAKE CALIPER INSERT – CLASSIC CHROME E. BRAKE CALIPER INSERT – G. FRONT BRAKE CALIPER KIT – CHROME G. REAR BRAKE CALIPER KIT – CHROME
HARLEY-DAVIDSON SCRIPT (44395-08 SHOWN) (SHOWN WITH
CHROME REAR CALIPER BRACKET)
184 CRUISER CRUISER 185
Chassis Trim – Rear End Chassis Trim – Rear End
A. CONTOURED FRAME INSERTS H. UPPER BELT GUARD – CHROME
These Contoured Frame Inserts are shaped to fill the frame Hand-polished and chrome-plated to replace your factory-
recesses that surround the swingarm pivot bolt. Adhesive equipped painted upper belt guard.
backed for easy installation. 60867-08
48211-08 Chrome. Fits ’07-’17 FLS, FLSS, FLSTFB, FLSTFBS, FLSTSB, FLSTSC,
Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB and FXCW, FXS, FXSB, FXSE, FXST and FXSTB models. Stock on
FXSBSE). many ’07-’17 Softail® models.
48212-08 Chrome.
Fits ’08-’17 FXCW, FXCWC, FXSB and FXSBSE and ’16-later I. SHOR’TEE UPPER BELT GUARD – GLOSS BLACK
FXSE models. Give your Softail motorcycle a unique stylish look. Designed
as a direct replacement for the Original Equipment upper belt
B. SOFTAIL® FRAME TRIM SET guard, this slotted steel guard adds a minimalistic “bobbed”
These easy-to-install chrome-plated trim plates fit into the look to the bike’s profile. With its cut-down length and turned-
recesses at the rear of the Softail frame and add a bright up tail, this Upper Belt Guard is the ultimate extension of your
finishing touch. To complete the look, add a set of chrome bike’s personality. Kit includes all required mounting hardware.
Swingarm Pivot Bolt Covers (sold separately). A. CONTOURED FRAME INSERTS B. SOFTAIL FRAME TRIM SET 60300004
47300-88T Fits ’08-’17 Softail models.
Fits ’84-’17 Softail models (except ’00-’17 FLSTF, FLSTFB,
FLSTFBS, FLSTN, FLSTSB and FXSTD models equipped with J. LOWER BELT GUARD
shotgun exhaust). This handsome formed steel guard replaces the Original
Equipment plastic debris deflector, providing a rich smooth
C. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT surface that complements the swingarm and frame. Available
Chrome rear frame inserts get you going on the road toward in chrome or gloss black finish, this complete kit includes all
the perfect Softail. Kit includes Swingarm Pivot Bolt Covers H. UPPER BELT GUARD – CHROME required mounting hardware.
and Frame Inserts. Easy installation kit.
Fits ’07-’17 FLS, FLSS, FLSTC, FLSTN, FLSTNSE, FXS, FXSB,
48452-00 FXSBSE, FXSE and FXSTD models.
Fits ’00-’07 FLSTF, FLSTN and FXSTD models. Does not fit
60654-07A Chrome.
FXSTDSE.
57100179 Gloss Black.
D. SWINGARM PIVOT BOLT COVERS Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FXST, FXSTB
Cover your swingarm pivot bolt with distinctive styling. and FXSTC, ’14-’15 FLSTNSE, ’10-’12 FLSTSE, ’16-’17 FXSE and
Available in your choice of mirror chrome or gloss black finish, ’07-’08 FXSTSSE. Chrome version stock on ’14-’15 FLSTNSE,
this kit includes set screws and Allen® wrench for easy instal- ’10-’12 FLSTSE and ’07-’08 FXSTSSE models.
lation (sold in pairs).
60655-07A Chrome.
Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB,
Fits ’00-’06 Softail models (except ’06 FXST, FXSTB and
FXSBSE, FXSE and FXST-Aus) and models equipped with
FXSTS).
Passenger Footboard Kits.
60316-00A Chrome with H-D Script Logo.
47660-09 Chrome – Die-cast.
C. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT D. SWINGARM PIVOT BOLT COVERS –
47612-08 Chrome – Billet. CHROME
SOFTAIL
47649-09 Gloss Black – Billet.
Fits ’00-’07 Softail models (except FLSTF, FXSTD and models
with Passenger Footboard Kit).
43462-00 Chrome – Die-cast.
Fits ’84-’99 Softail models (except FLSTS).
43897-86B Chrome – Die-cast.
F. SWINGARM PIVOT BOLT COVERS – G. SWINGARM PIVOT BOLT COVERS – BRASS J. LOWER BELT GUARD – CHROME J. LOWER BELT GUARD – GLOSS BLACK
HARLEY-DAVIDSON MOTOR CO. LOGO COLLECTION (60654-07A SHOWN) (57100179 SHOWN)
186 CRUISER CRUISER 187
Chassis Trim – Rear End Chassis Trim – Rear End
REAR AXLE NUT COVERS G. DOMINION™ COLLECTION REAR AXLE NUT COVERS
Cover your rear axle nut in the most traditional way. These Express your bold, renegade attitude. The machined alumi-
Rear Axle Cover Kits complement the matching Front Axle num Dominion™ Collection Rear Axle Nut Covers add style to
Nut covers. Easy to install, these cover kits include necessary the front of the bike and are the perfect complement to other
mounting hardware. Sold in pairs. Dominion Collection accessories.
43000129 Gloss Black.
A. REAR AXLE NUT COVERS Fits ’08-’17 Dyna® and ’08-later Softail® models (except
Fits ’08-’17 Dyna® and ’08-later Softail® models (except FXCW, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-AUS and ’18-later
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).
FLFBS, FLSB, FXBR, FXBRS and FXDRS).
41705-09 Chrome – Die-cast. H. BAR & SHIELD REAR AXLE COVERS
43422-09 Gloss Black – Billet. Add a sweep of chrome to the rear of the swingarm. This
mirror-finished cover hides the axle head and the rear of the
Fits ’00-’07 Softail models (except FLSTS and FLSTSC). (Will swingarm (sold in pairs).
not fit with saddlebags.) 42069-08
44256-01 Chrome – Die-cast. A. REAR AXLE NUT COVERS – A. REAR AXLE NUT COVERS – Fits ’08-’17 Softail models (except FLSTF, FLSTFB, FLSTFBS,
CHROME (44256-01 SHOWN) GLOSS BLACK (43422-09 SHOWN) FXCW, FXCWC, FXSB, FXSBSE and FXSE). Will not fit with
Fits ’09-’11 FXCW and FXCWC, ’13-’17 FXSB and FXSBSE, and
saddlebags.
’16-’17 FXSE models.
44345-09
43000051 Chrome – Billet. Fits ’08-’11 FXCW and FXCWC models. Will not fit with
43000052 Gloss Black – Billet. saddlebags.
B. REAR AXLE NUT COVERS – SATIN CHROME I. REAR AXLE COVERS – CHROME
Cover your rear axle nut in the most traditional way. Finished G. DOMINION REAR AXLE NUT COVERS – Traditional wedge-shaped rear axle covers follow the triangu-
in rich satin chrome, these easy-to-install rear axle covers are GLOSS BLACK lar lines of the Softail swingarm and conceal the swingarm
a subtle addition to blacked-out finishes. Kit includes neces- tail for a clean, custom look. This kit includes left and right
sary mounting hardware. Sold in pairs. covers, complementing trim discs and all required mounting
43000110 hardware.
Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW, 47596-91B
FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus and ’18-later FLFB, Fits ’87-’07 Softail models (except FLSTS). Will not fit with
FLFBS, FLSB, FXBR, FXBRS and FXDRS). saddlebags.
C. REAR AXLE NUT COVERS – BRASS COLLECTION J. REAR AXLE ADJUSTER HARDWARE – CHROME
Cover your rear axle nut in the most traditional way. Artistically Highly polished and chrome-plated hex-head bolts replace
manufactured from solid brass, these components feature a the standard hardware for a custom look. Manufactured to
natural antique finish that will age and patina when exposed to Original Equipment specifications to ensure fit and perfor-
the elements. Brass Collection Rear Axle Nut Covers comple- mance, this kit is the perfect addition to a chrome or painted
ment the matching Front Axle Nut covers. Easy-to-install kits swingarm.
include all necessary mounting hardware. Sold in pairs.
A. REAR AXLE NUT COVERS – B. REAR AXLE NUT COVERS – 41202-08 Fits ’08-’17 Softail models.
43000050
GLOSS BLACK (43000052 SHOWN) SATIN CHROME
SOFTAIL
Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW,
FXCWC, FXSB, FXSBSE, FXST-Aus and ’18-later FLFB, FLFBS,
FLSB, FXBR, FXBRS and FXDRS).
E. REAR AXLE NUT COVERS – F. REAR AXLE NUT COVERS – I. REAR AXLE COVERS – J. REAR AXLE ADJUSTER HARDWARE –
H-D MOTOR CO. LOGO, CHROME H-D MOTOR CO. LOGO, GLOSS BLACK CHROME CHROME
188 CRUISER CRUISER 189
Chassis Trim Chassis Trim – Fenders
A. BAR & SHIELD LOGO COIL COVER E. FRONT FENDER TRIM
Featuring a radical open-face design with a Bar & Shield logo Add a sweeping dash of chrome to the front fender. Chrome-
silhouette, this chrome coil cover matches chrome Voltage plated tapered spear features a stepped design that accentu-
Regulator Covers P/N 74597-01, for an integrated custom look. ates the flowing fender lines. Self-adhesive backing simplifies
Includes all mounting hardware. installation.
74616-04 14100618
Fits ’04-’17 EFI Dyna® and ’01-’17 EFI equipped Softail® Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later
models (except FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike
and FXST-Aus). models.
B. VOLTAGE REGULATOR – CHROME F. BAR & SHIELD LOGO FRONT FENDER SPEAR
Original Equipment voltage regulators with a sparkling triple- This chrome-plated trim spear adds a sweeping dash of
plated chrome finish. Hand-buffed, then copper-, nickel- and chrome to the front fender. Featuring a raised Bar & Shield
chrome-plated, these brilliant chrome-plated regulators are logo set against a textured black field, this self-adhesive
the perfect highlight for any Harley-Davidson® motorcycle. medallion is easy to install.
74567-11 Fits ’11-’17 Softail models. E. FRONT FENDER TRIM 91195-04 Large.
74610-08 Fits ’08-’10 Softail models. Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later
Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike
C. VOLTAGE REGULATOR COVER – CHROME models.
With a look that creates its own electricity, this chrome-plated 91194-04 Small.
cover features an embossed Bar & Shield logo and an open- Fits XL, XR, Dyna® (except FLD), FX Softail (except FXFB) and
center grill that allows air to flow right through for regulator ’18-later FLSL models.
cooling. Designed for easy installation. Chrome mounting
hardware included. A. BAR & SHIELD LOGO COIL COVER G. CONCHO FENDER SKIRT
74597-01 This decorative fender skirt features conchos inspired by the
Fits ’01-’17 Softail models (except FXSE). Will fit models Heritage Softail® Classic model.
equipped with Bullet Front Spoiler P/N 57039-XX. Will not fit 59147-96
with other Softail front spoilers. Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
and ’09-’13 Trike models equipped with Original Equipment
D. PREMIUM OIL COOLER KITS fender skirt.
This oil cooler was designed specifically for Harley-Davidson
to out-perform all other coolers in the industry. The cooler H. WILLIE G SKULL FENDER SKIRT
features a unique Turbulator system that evenly distributes This decorative chrome-plated fender skirt is a direct replace-
oil across the cooling chambers. The air fins are designed to ment for stock fender skirt. Features a three-dimensional
efficiently dissipate heat. The oil cooler has been designed sculptured concho with skull design set off with black accents.
to simplify installation and enhance performance. The large Mounting hardware included.
heat exchanger provides excellent cooling efficiency. The kit 59582-02A
features a one-piece adapter plate with integrated thermo- Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
stat that allows oil lines to connect to the oil filter bracket. and ’09-’13 Trike models equipped with Original Equipment
Thermostat activates at 185°F (85°C). Kit comes complete
F. BAR & SHIELD LOGO FRONT FENDER SPEAR F. BAR & SHIELD LOGO FRONT FENDER SPEAR
(LARGE SHOWN) (SMALL SHOWN) fender skirt.
SOFTAIL
with mounting hardware and precut oil lines.
26157-07A Center Mount. I. BAR & SHIELD FENDER SKIRT
Fits ’13-’17 FXSBSE and ’00-’17 Softail models (except FXSB) This rigid-steel fender skirt, designed to replace the origi-
without ABS. Does not fit ’11 FXCWC. ’08-’10 FXCW and nal factory-equipped aluminum trim, is formed, polished
FXCWC models require separate purchase of Horn and chrome-plated. Its ribbed pattern offers a unique styl-
Relocation Kit for Oil Cooler P/N 69015-08. Does not fit with ing element and adds rigidity. Subtle but distinctive brushed
Softail Front Spoiler Kits, or DEFINITIVE5 Filtration System aluminum Bar & Shield logos are framed by a stamped-in
Kits. Fits with all H-D® Engine Guards. Includes Chrome Oil ribbed outline on both sides.
Cooler Cover. 59228-91
26157-11A Side Mount. Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
Fits ’11-’17 Softail models. Fits with all H-D Engine Guards. Kit and ’09-’13 Trike models equipped with Original Equipment
includes Gloss Black Oil Cooler Cover. fender skirt.
D. PREMIUM OIL COOLER KIT – D. PREMIUM OIL COOLER KIT – I. BAR & SHIELD FENDER SKIRT J. FRONT FENDER EXTENSION – CHROME
’00-’17 SOFTAIL WITHOUT ABS ’11-’17 SOFTAIL WITH ABS
CENTER MOUNT SIDE MOUNT
190 CRUISER CRUISER 191
Chassis Trim – Fenders Chassis Trim – Fenders
A. FRONT FENDER TRIM KIT – CHROME F. HERITAGE FRONT FENDER RAIL – CHROME*
Replace the Original Equipment stainless steel fender trim A stylish re-creation of a popular Hydra Glide model accessory
with a splash of chrome. Kit includes left and right side trim direct from the Harley-Davidson® 1959 accessories catalog.
strip. Ornate, jet, twin-tube design sweeps smartly back along the
59209-91T front fender. Sparkling chrome-plating and years-ahead styl-
Fits ’86-’17 FLSTC and FLSTN and ’82-’13 Touring models ing make it a hit for all Heritage and FLSTN owners.
(except Road Glide® and Road King® Custom). Does not fit 91080-93
models equipped with clean front fender. Fits ’87-’17 FLST, FLSTC and ’93-’96 FLSTN models.
(Does not fit Springer™ models.)
B. FENDER TIP LENS KIT WITH SKULL LOGO
This chrome-plated fender tip lens kit adds a little attitude to G. HERITAGE REAR FENDER RAIL – CHROME*
your ride. The kit features front and rear lenses with a trans- A perfect match to Heritage Chrome Front Fender Rail
lucent illuminated skull silhouette. The easy-to-install kit P/N 91080-93. Designed to fit with stock FLSTC, FLSTN
includes an amber front lens and red rear lens. saddlebags or Genuine Harley-Davidson® Fat Boy® leather
59651-01 saddlebags.
Fits ’86-’17 FLSTC, ’93-’96 FLSTN and ’80-’08 Electra Glide®, A. FRONT FENDER TRIM KIT – CHROME 91402-00
Tour Glide and Road King® models (except FLHRC and Fits ’00-’17 FLST and FLSTC models.
FLHRS).
H. HERITAGE SOFTAIL® CLASSIC REAR FENDER
C. BAR & SHIELD LOGO FENDER TIP LENS KIT LEATHER MUD FLAP
Chrome-plated polycarbonate construction features trans- Get nostalgic with top-grain cowhide decorated with bright
lucent Bar & Shield emblems. The kit includes front and spots and a Heritage-style concho. A perfect match with your
rear lenses. Front lens features an amber Bar & Shield logo, Heritage saddlebags. Kit includes installation hardware and
rear lens features a red Bar & Shield logo. Quick and easy F. HERITAGE FRONT FENDER RAIL – CHROME template.
installation. 59071-98 Fits ’86-’17 FLSTC models.
59081-96 Front and Rear.
Fits ’86-’17 FLSTC, ’93-’96 FLSTN and ’80-’08 FLHR, FLHS, I. HERITAGE SPRINGER™ LEATHER MUD FLAP
FLHT and FLT models. (Does not fit Springer™, FLHRS or WITH FRINGE
FLTR.) Made from premium, plated leather with black trim, these
flaps have fringe and an ’97-’03 FLSTS concho and black
D. H-D® CLASSIC FENDER TIP trim. Includes chrome hardware, support bracket and fender
Stock on Road King Classic models, these nostalgic-look mounting template.
fender tips are also available for other models. Replaces 59027-99
fender lamp assembly. Fits ’97-’03 FLSTS models front or rear fender. Also fits
59002-98 Front. ’86-’17 FLSTC, ’86-’06 FLSTF and ’93-’96 FLSTN models.
Fits ’80-’13 FL, ’86-’08 FLSTC, ’94-’13 FLHR and ’09-’13
FLHTCUTG models.
59052-98 Rear.
Fits ’80-’08 FL and FLHR models and ’86-’99 FLSTC models. A. FRONT FENDER TRIM KIT – CHROME
(Does not fit FLSTF and FLTR models.)
SOFTAIL
E. EAGLE WING FENDER TRIM FOR FAT BOY® MODELS
Classic Eagle Wing logo in gold & chrome with black accent.
Matches Eagle Wing headlamp, tail lamp and turn signal visors.
Fits ’90-’06 FLSTF models.
1. 59369-97 Rear, Gold & Chrome.
Fits ’90-’17 FLSTF, FLSTFB and FLSTFBS models.
2. 59367-97 Front, Gold & Chrome.
B. FENDER TIP LENS KIT WITH SKULL LOGO C. BAR & SHIELD LOGO FENDER TIP LENS KIT
D. H-D CLASSIC FENDER TIP E. EAGLE WING FENDER TRIM FOR H. HERITAGE SOFTAIL CLASSIC REAR FENDER I. HERITAGE SPRINGER LEATHER MUD FLAP
FAT BOY MODELS LEATHER MUD FLAP WITH FRINGE
ROAD KING ®
HARLEY-DAVIDSON® TOURING
FLHR | GAUNTLET GRAY/VIVID BLACK
HARLEY-DAVIDSON® TOURING
FLHRXS | MINERAL GREEN DENIM
HARLEY-DAVIDSON® TOURING
FLHX | MIDNIGHT CRIMSON
HARLEY-DAVIDSON® TOURING
FLHXS | REDLINE RED
HARLEY-DAVIDSON® TOURING
FLHXST | GUNSHIP GRAY
HARLEY-DAVIDSON® TOURING
FLTRX | REEF BLUE
HARLEY-DAVIDSON® TOURING
FLTRXS | WHITE SAND PEARL
HARLEY-DAVIDSON® TOURING
FLTRXST | GUNSHIP GRAY
HARLEY-DAVIDSON® TOURING
FLTRK | REEF BLUE/VIVID BLACK
HARLEY-DAVIDSON® TRIKE
FLRT | MIDNIGHT CRIMSON/VIVID BLACK
HARLEY-DAVIDSON® TRIKE
FLHTCUTG | GAUNTLET GRAY METALLIC/VIVID BLACK
Take the pressure off with an easy-to-install detachable windshield. Fits ’94-later Road King® models. ’04-’07 FLHRS and ’17-later
FLHRXS models require additional purchase of Mounting
Shaped to divert air, rain and road debris around the rider, a windshield can add hours of riding comfort. Hardware Kit P/N 58221-04.
57995-96 22" Clear – Polished.
Windshield dimensions: Overall height – 29.0"; width – 23.1".
58325-06 18" Clear – Polished.
Windshield dimensions: Overall height – 25.0"; width – 23.1".
57981-97 16" Light Smoke – Polished.
E XT ENDED COV E R AGE Windshield dimensions: Overall height – 23.0"; width – 23.1".
57400380 20" Clear – Black.
Windshield dimensions: Overall height – 27.2"; width – 23.1".
57400381 18" Clear – Black.
Windshield dimensions: Overall height – 25.0"; width – 23.1".
TALL 22"
57400383 16" Light Smoke – Black.
18" Windshield dimensions: Overall height – 23.0"; width – 23.1".
16"
STANDARD HEIGHT Also available:
14"
ROAD KING WINDSHIELD DOCKING HARDWARE KIT
Kit includes the hardware required to install a H-D®
LOW PROFILE Detachables™ Road King Windshield on the Road King
Custom and Special models.
58221-04 Fits ’04-later FLHRS and ’17-later
FLHRXS models.
Also available:
A. H-D DETACHABLES WINDSHIELD – POLISHED BRACES
REPLACEMENT WINDSHIELD SCREEN
Formed of polycarbonate and available in a size that suits
your riding needs. Kit includes screen, cross brace tape and
instructions.
Fits ’94-later Road King models (except ’13-’14 FLHRSE).
58433-96 22" Clear.
20" 58135-94 20" Light Smoke.
58195-94 16" Light Smoke.
18"
16"
TOURING
WIN D SPLIT T ER
Wind Splitter windshields are shaped for SCRATCH-RESISTANT
effective airflow management and HARD-COATED
POLYCARBONATE SHIELD
wow styling. The sweeping design adds
height over a traditional low-profile
wind deflector in the center where it counts.
Also available:
ROAD KING 11" H-D DETACHABLES WIND DEFLECTOR
Keep the wind and glare out of your eyes with this Smoked
Wind Deflector. This dark smoke detachable mini-shield 14"
follows the form of a traditional Harley-Davidson® Road King®
windshield, but its much smaller size adds a touch of low-
down attitude.
58163-02 11" Dark Smoke. 11"
Fits ’94-later Road King models. ’04-’07 FLHRS and ’17-later
TOURING
FLHRXS models require additional purchase of Mounting
Hardware Kit P/N 58221-04. Stock on ’08 FLHRSE models.
Windshield dimensions: Overall height – 18.0"; width – 19.4".
Touring
B. ROAD KING 14" H-D DETACHABLES WIND DEFLECTOR D. FORK-MOUNT WIND DEFLECTORS – CHROME
222 TOURING & TRIKE TOURING & TRIKE 223
Windshields — Electra Glide® Windshields — Electra Glide®
A. WIND SPLITTER WINDSHIELD – BATWING FAIRING B. 7" WIND SPLITTER ST WINDSHIELD – BATWING
In the world of functional performance, size does matter. FAIRING
After all, it’s simple to understand that the larger the wind- Combine functional performance and custom style with this
shield area, the greater the amount of wind deflection. The gold-tone Wind Splitter Windshield. This Wind Splitter wind-
Wind Splitter Windshield is a great look for all Touring models shield is a great look for all Street Glide® models and is shaped
and is shaped for the perfect combination of effective airflow for the perfect combination of effective airflow management
management and “wow” styling. The sweeping design comple- and wow styling. Sweeping design complements the shape
ments the shape of the fairing and the inner dash panel and of the fairing and the inner dash panel, and adds height over
adds height over a traditional low-profile wind deflector in the a traditional low-profile wind deflector in the center where it
center where it counts. The shape decreases wind noise and counts Shape decreases wind noise and improves your abil-
improves your ability to hear the motorcycle’s sound system. ity to hear the motorcycles sound system. Easy-to-install and
The rich smoked finish does not interfere with your forward features a center-mount Bar & Shield logo for a distinctive
view and looks great against any paint color. The easy-to- finishing touch.
install Wind Splitter features a center-mount Bar & Shield 57400528
medallion for a distinctive finishing touch. Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited™
Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and and Tri Glide® models.
4.5" DARK SMOKE 7" DARK SMOKE 10" LIGHT SMOKE B. 7" WIND SPLITTER ST WINDSHIELD - BATWING FAIRING
Tri Glide® models.
C. BATWING FAIRING WINDSHIELDS
57400204 4.5" Dark Smoke. Tailor your bike to your size and riding style. For the best
Does not fit with Windshield Bags or Pouches. compromise between adequate protection from the elements
57400205 7" Dark Smoke. and a clear view of the road ahead, select a windshield that
Does not fit with Windshield Bags or Pouches. tops out just below eye level. This reduces helmet buffet-
57400206 10" Light Smoke. ing while allowing a view unobstructed by dirt, bugs and rain
drops. Harley-Davidson® windshields are formed of hard-
Fits ’96-’13 Electra Glide, Street Glide and Trike models. Does coated polycarbonate for strength and scratch resistance
not fit with fairing mounted zu–mo® GPS Navigator, Windshield
and are available in a variety of heights and tints to suit your
Bags or Pouches. riding needs.
57400091 4.5" Dark Smoke.
Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and Tri
57164-10 7" Dark Smoke. Glide models.
57400092 10" Light Smoke.
57400224 15" Clear.
57400228 12" Clear.
57400226 12" Light Smoke.
57400227 10" Clear.
57400225 10" Light Smoke.
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
58314-97 15" Clear.
58187-96 12" Clear.
A. WIND SPLITTER WINDSHIELD – BATWING FAIRING C. BATWING FAIRING WINDSHIELD – 15"
(4.5" DARK SMOKE SHOWN) 58302-96 12" Light Smoke.
58301-96 10" Clear.
58303-96 10" Light Smoke.
TOURING
A. WIND SPLITTER WINDSHIELD – BATWING FAIRING C. BATWING FAIRING WINDSHIELD – 12"
(7" DARK SMOKE SHOWN)
TOURING
B. BATWING FAIRING WIND DEFLECTOR – LOW PROFILE E. ADJUSTABLE AIR DEFLECTOR KIT
Dark Smoke
Light Smoke
TOURING
C. EDGE CUT WINDSHIELD TRIM G. ILLUMINATED WINDSHIELD TRIM – CHROME
D. BAR & SHIELD WINDSHIELD TRIM G. ILLUMINATED WINDSHIELD TRIM – GLOSS BLACK
228 TOURING & TRIKE TOURING & TRIKE 229
Windshields — Road Glide® Windshields — Road Glide®
A. WIND SPLITTER WINDSHIELD – ROAD GLIDE® MODEL C. ROAD GLIDE® ST 6” WIND DEFLECTOR
In the world of functional performance, size does matter. Roll with custom style. This 6-inch Wind Deflector accentuates
After all, it’s simple to understand that the larger the wind- the curvaceous shape of the Road Glide® model’s fairing, and
shield area, the greater the amount of wind deflection. The hugs the contours of the splitstream vent.
Wind Splitter Windshield is a great look for all Touring models 57400526 $224.95
and is shaped for the perfect combination of effective airflow Fits ‘15-later Road Glide® models.
management and “wow” styling. The sweeping design comple-
ments the shape of the fairing and the inner dash panel and D. ROAD GLIDE 4" LOW-PROFILE WINDSCREEN
adds height over a traditional low-profile wind deflector in the Sometimes, it’s all about style. This minimalistic Low-Profile
center where it counts. The shape decreases wind noise and Windscreen accentuates the curvaceous shape of the Road
improves your ability to hear the motorcycle’s sound system. Glide model’s fairing, and hugs the contours of the splitstream
The rich smoked finish does not interfere with your forward vent. The opaque black finish defines the transition from the
view and looks great against any paint color. The easy-to- inner to the outer fairing surfaces, and provides a low, lean
install Wind Splitter features a center-mount Bar & Shield look to your custom ride.
medallion for a distinctive finishing touch.
57400310 Black.
Fits ’15-later Road Glide® models. A. 12" WIND SPLITTER WINDSHIELD – (57400271 SHOWN) C. GOLD ROAD GLIDE® 6” WIND DEFLECTOR C. GOLD ROAD GLIDE® 6” WIND DEFLECTOR Fits ’15-later Road Glide models. Does not fit with Road Glide
57400271 12" Light Smoke. Fairing Pouch P/N 93300097.
57400270 15" Light Smoke.
E. ROAD GLIDE 6" CONTOURED WIND DEFLECTOR –
Fits ’98-’13 Road Glide models. BLACK
Go low with this Road Glide model windshield that is contoured
57400093 9" Dark Smoke.
for a unique style.
57166-10A 12" Dark Smoke.
57400280 Black.
B. ROAD GLIDE® WINDSHIELDS Fits ’15-later Road Glide models.
Tailor your bike to your size and riding style. For the best
compromise between adequate protection from the elements F. ROAD GLIDE 5" WIND DEFLECTOR – BLACK
and a clear view of the road ahead, select a windshield that Opaque black deflector provides radical styling for the ulti-
tops out just below eye level. This reduces helmet buffet- mate custom cruiser.
ing while allowing a view unobstructed by dirt, bugs and rain 57957-98A
drops. Harley-Davidson® windshields are formed of hard- Fits ’98-’13 Road Glide models. Will fit with Road Glide
coated polycarbonate for strength and scratch resistance and Windshield Trim P/N 58519-07.
are available in a variety of heights to suit your riding needs.
Fits ’15-later Road Glide® models.
57400279 19" Clear.
57400281 15.5" Clear.
A. 15" WIND SPLITTER WINDSHIELD – (57400270 SHOWN) D. ROAD GLIDE 4" LOW-PROFILE WINDSCREEN
TOURING
A. 9" WIND SPLITTER WINDSHIELD – A. 12" WIND SPLITTER WINDSHIELD – E. ROAD GLIDE 6" CONTOURED WIND DEFLECTOR – BLACK
(57400093 SHOWN) (57166-10A SHOWN)
TOURING
C. ROAD GLIDE WINDSHIELD TRIM – GLOSS BLACK
(SHOWN WITH WIND SPLITTER WINDSHIELD)
B. ROAD GLIDE SPLIT WINDSHIELD TRIM – SATIN BLACK D. ROAD GLIDE COMPARTMENT LINERS (76000539 SHOWN)
232 TOURING & TRIKE TOURING & TRIKE 233
Fairing – Accessories Fairing – Accessories
A. THREE-POCKET BATWING FAIRING POUCH – D. ROAD GLIDE® FAIRING POUCH
’14-LATER MODELS This two-pocket Fairing Pouch is ideal for storing mobile
Convenient storage space at your fingertips. Designed to devices, sunglasses and other small items. Contoured for a
complement H-D® Wind Deflectors and Windshields, this fair- custom fit, the dash pad and pouch system fits perfectly with
ing pouch is ideal for storing mobile devices, sunglasses and Harley-Davidson® wind deflectors and windshields. The sturdy
other small items. The sturdy plastic pouches are wrapped molded pouches are wrapped in supple UV-resistant vinyl for
in supple UV-resistant vinyl for a premium look and feel and a premium look and feel, and the magnetic closures keep your
the magnetic closures keep your items within reach without items within reach. The left pouch provides easy access to the
detracting from the tastefully smooth styling. Road Glide model’s Splitstream vent control button.
93300054B 93300097
Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and Fits ’15-later Road Glide® models. Does not fit with Road
Tri Glide® models with windshields. Not for use with Wind Glide® Low-Profile Windscreen P/N 57400310. CVO Road
Splitter Windshields P/N 57400204 or 57400205. Not for Glide® requires installation of windshield.
use with Illuminated Windshield Trim P/N 57000394 or
57000395. E. TWO-POCKET WINDSHIELD POUCH
A. THREE-POCKET BATWING FAIRING POUCH – ’14-LATER MODELS Add convenient storage space up front where you need it. This
B. THREE-POCKET BATWING FAIRING POUCH – easy-to-install windshield pouch features two easily accessi-
’96-’13 MODELS ble storage pockets sized for cell phones, glasses and other
Convenient storage space at your fingertips. Designed to small items. Hook-and-loop closures allow easy one-handed
complement H-D Wind Deflectors and Windshields, this fair- opening. Both pouches are accented with an embossed
ing pouch is ideal for storing cell phones, sunglasses and Harley-Davidson logo for a finishing touch.
other small items. The sturdy plastic pouches are wrapped 57203-07
in supple UV-resistant vinyl for a premium look and feel and Fits King-Size or Compact windshields. Does not fit FXDWG,
the magnetic closures keep your items within reach, while FLSTSB or FXSTD models. Does not fit Rigid-Mount, Super
D. ROAD GLIDE FAIRING POUCH
not detracting from the tastefully smooth styling. The left- Sport, Nostalgic or Flamed windshields.
hand pouch can be easily removed to accommodate your fair-
ing-mounted GPS unit. Attractive Harley-Davidson script is F. EMBOSSED BAR & SHIELD LOGO LEATHER
featured on the front center pouch and on the outboard-facing WINDSHIELD BAG
side, visible through the windshield. Black domestic steerhide bag features an embossed Bar &
58900-11 Shield logo.
Fits ’96-’13 Electra Glide, Street Glide and Trike models. Not 58308-95
for use with Fairing Dash Pads. Models equipped with Fits King-Size and Compact windshields (except FXSTD,
Illuminated Windshield Molding P/N 57335-08 requires Flame and Skull with Wings). Does not fit 100th Anniversary
separate purchase of Screws P/N 4456 (Qty 3), Bar & Shield logo windshields, models equipped with handlebar mount
Windshield Molding P/N 59133-99 requires separate gauges or Road Tech™ Riser Mount Radio.
purchase of Screws P/N 94386-92T (Qty 3), Chrome
Windshield Trim P/N 59213-96 requires separate purchase of G. ROAD KING® CLASSIC LEATHER WINDSHIELD BAG
Screws P/N 94397-91T (Qty 3). Leather bag features textured leather insert, H-D® concho and
a turnbuckle closure.
C. THREE-POCKET WINDSHIELD POUCH B. THREE-POCKET BATWING FAIRING POUCH – ’96-’13 MODELS
Add convenient storage space up front where you need it. This 58189-98
easy-to-install windshield pouch features three easily acces- Fits King-Size and Compact windshields (except FXSTD,
sible storage pockets sized for cell phones, glasses and other Flame and Skull with Wings). Does not fit 100th Anniversary
small items. The center pouch is accented with an embossed logo windshields, models equipped with handlebar mount
Harley-Davidson script for a finishing touch. gauges or Road Tech Riser Mount Radio.
58904-03
Fits King-Size (except Springer™ and Rigid- Mount King Size)
and Road King® windshields (except Wind Deflector and
Adjustable Height).
TOURING
D. ROAD GLIDE FAIRING POUCH – OPEN
C. THREE-POCKET WINDSHIELD POUCH E. TWO-POCKET WINDSHIELD POUCH G. ROAD KING CLASSIC LEATHER
WINDSHIELD BAG
234 TOURING & TRIKE TOURING & TRIKE 235
Fairing Lowers Air Deflectors
A. FAIRING LOWER FITTED GLOVE BOX LINER KIT E. MID-FRAME AIR DEFLECTOR – SMOKED
Protect your belongings and reduce noise and rattles on the Our new smoked Lexan Mid-Frame Air Deflector improves
road. Soft-touch felt finish liner is formed to the fairing glove style and comfort. Fits perfectly between your Harley-
box interior for a perfect fit. Molded base and sides maximize Davidson® Touring or Trike frame and side panels to direct
the interior room and one-piece design allows easy removal for engine heat away from the rider and improve comfort on
cleaning and maintenance. hot summer rides. Designed and tested for severe duty and
57100270 extreme temperature applications. Durable smoked Lexan
Fits ’14-later Touring and Trike models equipped with Original material adds subtle style. Easy to install and includes
Equipment or accessory Vented Fairing Lowers. Does not fit required mounting hardware
Twin-Cooled™ models. 57200356
Fits ‘09-later Touring and Trike models. Not compatible with
B. FLT AND FLHT FAIRING LOWER GLOVE BOXES ‘17-later models equipped with Cool Flow™ Fan P/N
Offers a convenient place to store riding gloves, sunglasses, 26800120, 26800121 and 26800128. Stock on ‘20-later
etc. The snap-on door cover (included) is embossed with CVO™ models.
Bar & Shield logo. Available in black only.
58684-89B Right Side. F. MID-FRAME AIR DEFLECTOR
A. FAIRING LOWER FITTED GLOVE BOX LINER KIT
Fits ’04-earlier Original Equipment non-vented style FLHT Designed for severe duty and extreme temperature applica-
Ultra Classic® Fairing Lowers. tions. These black deflectors attach to the frame below the
seat and direct heat away from the rider to improve comfort.
C. FAIRING LOWER QUICK-RELEASE HARDWARE KIT Kit includes all necessary hardware.
Beat the summer heat and prepare for around-town cruising 58002-09A
by removing the fairing lowers on your Ultra Classic® Electra Fits ’09-later Touring and Trike models. Not compatible with
Glide® model. This kit includes highly polished stainless steel ’17-later models equipped with CoolFlow™ Fan
clamps that are detachable without the need for tools. E. MID-FRAME AIR DEFLECTOR F. MID-FRAME AIR DEFLECTOR – P/N 26800120, 26800121 and 26800128.
47200240 – SMOKED – (58002-09A SHOWN) 57200157
Fits ’14-later FLHTCU and FLHTCUL models. Also fits ’14-later (58002-09A SHOWN) Fits ’17-later Touring and Trike models equipped with
Touring models equipped with Accessory Fairing Lowers. CoolFlow Fan P/N 26800120, 26800121 and 26800128.
Does not fit Twin-Cooled models or models equipped with 58022-07A
fairing lower speakers. Fits ’01-’08 Touring models. Does not fit ’01-’07 models
58146-07 equipped with Adjustable Rider Backrests.
Fits ’05-’13 Touring and Trike models equipped with Vented
Fairing Lowers and ’88-later Touring and Trike models G. MID-FRAME AIR DEFLECTOR TRIM
equipped with Vented Fairing Lower Kit 58854-YYXXX. Does This injection-molded trim adds a touch of chrome to the
not fit models equipped with fairing lower speakers. Mid-Frame Air Deflectors on touring vehicles. These chrome
accents blend the look of chrome from the engine and help
D. SOFT LOWERS make the deflectors look integrated with the bike.
Extend your riding season. Full-coverage Soft Lowers provide 61400028
wind and mud protection for the rider’s legs and boots and Fits ’09-later Touring and Trike models with Original
minimize cold updrafts as the weather changes. Covers are Equipment Mid-Frame Air Deflectors. Also fits models
custom shaped to hug the engine guard to minimize flap- B. FLT AND FLHT FAIRING LOWER GLOVE BOXES
equipped with Mid-Frame Air Delectors P/N 58002-09. Does
ping and they simply clip in place for speedy installation as not fit ’17-later models equipped with CoolFlow Fan Kits.
the weather changes. Two-way zippered outer edge accom-
modates guard-mounted highway pegs in almost any posi- H. ROAD GLIDE® WIND DEFLECTOR KIT
tion. Reflective piping provides added visibility and convenient Easy to install, these snap-fit Wind Deflectors reduce and redi-
zippered pockets provide additional storage for maps or other rect the airflow that rises between the fairing and fork tubes.
small items. The resulting reduction in updraft can dramatically reduce
57100210 buffeting for many riders.
Fits ’80-later Touring and Trike models equipped with engine 57000510
guards. Does not fit with Original Equipment or accessory Fits ’15-later Road Glide® models (except ’18-later FLTRXSE
Color-Matched Fairing Lowers. Does not fit Mustache or models, ’21-later FLTRXS and ’22-later FLTRXST models).
Chopped Engine Guards. Does not fit models with Extended Stock on ’15-later FLTRUSE and ’20 FLTRK. Does not fit with
Reach Brake Lever or Extended Reach Shift Lever. FLHXXX Chopped Engine Guards P/N’s 49000105A or 49000114A.
TOURING
models require separate purchase of engine guards.
57000063
Fits ’98-’13 Road Glide models. (Will not fit models equipped
F. MID-FRAME AIR DEFLECTOR – G. MID-FRAME AIR DEFLECTOR TRIM with the Fuel Tank retrofit mounting kit.) Stock on ’11-’13
(57200157 SHOWN) CVO™ Road Glide models.
H. WIND DEFLECTOR –
(57000510 SHOWN)
D. SOFT LOWERS – FRONT VIEW D. SOFT LOWERS – REAR VIEW H. ROAD GLIDE WIND DEFLECTOR KIT H. WIND DEFLECTOR –
(57000063 SHOWN)
236 TOURING & TRIKE TOURING & TRIKE 237
Rider Comfort Oil Coolers
A. COOLFLOW™ FAN C. MILWAUKEE-EIGHT® ENGINE OIL COOLER FAN
Unlike traditional fan kits that try to cool the engine by blowing Traffic jam? This Oil Cooler Fan can help keep Milwaukee-Eight
air across the cylinders and often onto your legs, the CoolFlow Engine oil temperature under control if you find yourself idling
Fan Kit keeps the riders comfortable by pulling air away from or moving slowly in traffic, especially in hot weather. Fan auto-
the rear cylinder and exhaust pipe, and directing it toward the matically engages to lower oil temperature up to 50 degrees
ground. compared to an oil cooler without a fan. Weather-proof for
durability. Perfect addition to a bike equipped with high perfor-
The CoolFlow Fan features switched On/Off/Auto operation mance components. Ideal for bikes that see parade duty and
on ’17-later models and On/Off on ’09-’16 models. In the “ON” other low speed or continuous idle situations. Fan automat-
mode, the fan is active at low speeds, and will turn off when ically engages when the engine oil temperature rises. When
the bike reaches 40mph. As speed drops, the fan turns back in operation the Oil Cooler Fan can provide up to a 50 degree
on at 35 mph. This logic program prevents the fan from cycling drop in oil temperature compared to an oil cooler without a
on and off during low speed changes. On ’17-later models, the fan. The Harley-Davidson® Oil Cooler Fan utilizes weather-
AUTO setting operates based on a combination of speed rated fans and electronics that are designed for reliable
parameters and specific engine and ambient temperatures. service in the harsh motorcycle environment. Engineered for
Built to withstand the harsh motorcycle environment, the all- bolt-on installation and plug-and-play compatibility with your
weather CoolFlow Fan is 100% waterproof and includes every- bike’s wiring harness without unhooking messy oil lines. ECM
thing you need for installation. The plug-and-play design is reprogramming by a Harley-Davidson® Dealer is required to
integrated with the vehicle electronics, so “On/Off/Auto” fan complete the installation. No splicing or rewiring is required
operation is indicated in the odometer screen. Your dealer will
enable this function in the Electronic Control Module (ECM) 26800195
and you’re ready to roll. Odometer fan status display feature Fits ’17-later Touring models equipped with air/oil-cooled
availability varies by model and may not be available for your Milwaukee-Eight® engines. Does not fit models equipped
vehicle. with Twin-Cooled™ engines, or Trike and Police models
equipped with fan assisted oil coolers. Not compatible with
26800121 A. COOLFLOW FAN C. MILWAUKEE-EIGHT® ENGINE OIL COOLER FAN
Oil Cooler Cover P/N 25700633 or 25700634.
Fits ’17-later FLHR, FLHRC, FLHRXS, FLHP and FLRT models.
Does not fit with Starter End Cover P/N 31400088 and D. PREMIUM OIL COOLER KITS – TOURING
31400090. FLHRC Brazil configurations and FLHP (all This oil cooler was designed specifically for Harley-Davidson
regions) require separate purchase of Mid-Frame Air to out-perform all other coolers in the industry. The cooler
Deflector P/N 57200151. Separate purchase of Mid-Frame Air features a unique “Turbulator” system that evenly distributes
Deflector Kit P/N 57200157 is recommended for maximum oil across the cooling chambers. The air fins are designed to
performance on all other vehicles. Dealer Digital Technician efficiently dissipate heat. The oil cooler has been designed
update is required to display fan status. to simplify installation and enhance performance. The large
26800120 heat exchanger provides excellent cooling efficiency. The kit
Fits ’17-later FLHT, FLHXS, FLHXST, FLHXSE, FLTRX, FLTRXS features a one-piece adapter plate with integrated thermo-
and FLTRXST models. models. Does not fit with Starter End stat that allows oil lines to connect to the oil filter bracket.
Cover P/N 31400088 and 31400090. FLHXS and FLHXSE Thermostat activates at 185°F (85°C). Kit comes complete
Brazil configurations require separate purchase of Mid- with mounting hardware and precut oil lines.
Frame Air Deflector P/N 57200151. Separate purchase of
Mid-Frame Air Deflector Kit P/N 57200157 is recommended
Inside View of Inside View of
for maximum performance on all other vehicles. Dealer Conventional Oil Cooler
Premium Oil Cooler
Digital Technician™ update is required to display fan status. With Turbulators Without Turbulators
26800128
OIL FLOW OIL FLOW
Fits ’17-later FLHTCU, FLHTCUTG, FLHTCUTGSE, FLHTK,
FLHTKL, FLHTKSE, FLHTP, FLTRK and FLTRU models. Does
not fit with Starter End Cover P/N 31400088 and 31400090.
FLHTCUTG (HDI, ENG, HDJ configurations only), FLHTP and HOT
FLTRU models require separate purchase of Switch Pack Cooling Fins OIL
TOURING
Fits ’09-’16 Touring and Trike models with or without Original (Inside cooler)
Equipment Mid-Frame Air Deflectors. Separate purchase of
Mid-Frame Air Deflector Kit P/N 58002-09A is Turbulators disperse and mix Coolers without the
A. COOLFLOW FAN (26800120 SHOWN) A. COOLFLOW FAN (26800128 SHOWN) D. PREMIUM OIL COOLER KIT – ’09-’10 TOURING oil inside cooler to provide Turbulator system allow oil to
recommended for maximum performance if not equipped. (26155-09A SHOWN) more efficient cooling capa- flow only in a straight path.
’15-’16 FLRT models require separate purchase of Switch
bilities. The cooler oil is not Oil does not mix and the
Pack P/N 71522-08. allowed to remain along the cooler oil remains along the
boundaries of the flow tube outer boundaries, while the
B. FAN ASSISTED OIL COOLER as in conventional coolers. hotter oil remains along the
Keep your cool. This easy-to-install Oil Cooler features a ther- Rear center path of flow. Without
mostatically controlled fan that provides continuous flow of the mixing effects of the
cooling air – even while the bike is idling in traffic or moving Turbulators, the conventional
at low speed. Ideal for bikes that see parade duty and other oil cooler provides less effi-
low speed or continuous idle situations, the Fan Assisted Oil cient cooling capabilities.
Cooler is also the perfect addition to a bike modified with high- 26155-09A Horizontal Mount.
performance components. The fan automatically engages Fits ’09-’10 Touring models. Does not fit with Voltage
when the engine oil temperature rises, and when in operation, Regulator Cover P/N 74538-09, DEFINITIVE5™ Filtration
the Fan Assisted Oil Cooler can provide up to a 50-degree System Kit or models equipped with a sidecar.
drop in oil temperature. And unlike other models, the Harley-
Davidson® Fan Assisted Oil Cooler utilizes weather-rated 26082-05C Horizontal Mount.
fans and electronics that are designed for the harsh motor- Fits ’99-’06 Touring models. Does not fit with Chrome
cycle environment. Engineered as a bolt-on replacement for Display Stand P/N 99002-97A, Voltage Regulator Cover
the Original Equipment oil cooler, the Fan Assisted Oil Cooler P/N 74538-09, DEFINITIVE5 Filtration System Kit or models
is plug-and-play compatible with your bike’s wiring harness. equipped with a sidecar.
No splicing or rewiring is required. ECM reprogramming by a
Harley-Davidson Dealer is required to complete the
installation.
62700204 Front
Fits ’17-later Touring models equipped with air/oil-cooled
Milwaukee-Eight® engines. Does not fit models equipped
with Twin-Cooled™ engines. Not compatible with Oil Cooler
Cover P/N 25700633 or 25700634. Original Equipment on
oil-cooled Police and Freewheeler® models.
B. FAN ASSISTED OIL COOLER D. PREMIUM OIL COOLER KIT – ’09-’10 TOURING D. PREMIUM OIL COOLER KIT
(26155-09A SHOWN) (26082-05C SHOWN)
238 TOURING & TRIKE TOURING & TRIKE 239
C OM F O R T IS K I N G E N J OY THE R I D E
The ability to spend hours behind the handlebars and rack up hundreds of miles without stopping is dictated by how you The relationship between the seat, the handlebar and the foot controls has an enormous impact on
feel on your bike. The shape of the seat, the reach to the handlebars and the location of your feet are all major the comfort, control and confidence you feel when riding your motorcycle. Once you’ve
factors in how far you can travel in a day. But don’t forget your passenger’s needs — he or she has a stake in this ride as well. picked the bike, it’s time to choose the options that match your ride to your personal dimensions.
T H E R I D E R & PA S S E N G E R E N V I R O N M E N T For shorter riders, consider tailoring your fit by changing to a Reach® For taller riders, consider altering your ride by changing to a
Seat, Standard Foot Controls and lowered suspension height. Tallboy® Seat and Extended Foot Controls.
Accessories that impact the rider and passenger’s physical contact with the motorcycle and the management of wind,
temperature and road conditions should be your first consideration in building the ultimate touring machine.
12 REACH ® APE
9 5
2 11 LOW-PROFILE
13
3
TALLBOY™
4
TALLBOY ®
10
REACH ®
14
8 15 7 6
EXTENDED REACH
REAR BRAKE LEVER
16
EXTENDED REACH
FOOTBOARD PANS
LOW HEIGHT
R I D E R / PA S S E N G E R C O N T A C T P O I N T S PA G E # R I D E R / PA S S E N G E R E N V I R O N M E N T PA G E #
TOURING
– Original Equipment 2016 Electra Glide Low model seat –
.500" lower, .500" rearward
52000253 B. REACH SOLO SEAT E. REACH TWO-UP SEAT – ’08 MODELS
Fits ’09-later Touring models. Does not fit Trike models. Does
not fit models equipped with Passenger Grab Rails. Does not
accept rider backrest or passenger pillion. Seat width 15.0".
Reach Seats
C. REACH TWO-UP SEAT – ’14-LATER MODELS F. REACH TWO-UP SEAT – ’97-’07 MODELS
242 TOURING & TRIKE TOURING & TRIKE 243
Seating – Tallboy® Seating – Signature & Sun Ray®
TALLBOY® SEATS D. SIGNATURE SERIES® SOLO SEAT WITH
The correct riding position can help a tall rider sit comfortably RIDER BACKREST
on the bike and avoid leg cramps and back strain during a long The perfect combination of foam density and shape has
day in the saddle. For riders with a longer inseam, a Tallboy® resulted in our most comfortable seat for long-haul tour-
Seat will put you on the road to fatigue-free riding. Designed ing. The seat is shaped with a wide seating area to spread the
to move the rider up and back from the stock seating position, pressure across the broad surface and a narrow nose area to
a Tallboy Seat can eliminate the knees-high riding position and keep your legs together for a shorter reach to the ground. The
effectively places the body for a natural arm and leg reach to Signature Series® Solo Seat features a built-in, fully adjustable
the controls. Tallboy Seats feature a bucket-shaped design for and removable rider backrest for added support. The back-
added support and a wide seating surface to reduce pressure rest provides a 5-position height adjustment with 1.5" range
on the tailbone. and a wide range of forward/back adjustment with a quick
twist of the control knob. The backrest pad features a sleek
A. TALLBOY SEAT – ’14-LATER MODELS shape that provides full lower back support without push-
This Tallboy Seat moves the rider back 1.5"* to provide much- ing the rider forward. When combined with the comfortable
needed arm and leg room for the long-limbed rider. The seat is Passenger Pillion P/N 52000133 or 51770-09 (sold sepa-
sculpted to provide superior support and comfort, with a slight rately), the slim profile of the rider backrest offers the passen-
bucket shape to provide room to vary your riding position fore ger a few more inches of space and the fold-down design
and aft. The seat’s level seating surface does not pitch the rider permits easy passenger mounting/dismounting. The rich vinyl
forward, and the overall ride height is similar to stock Electra seating surface is easy to clean and maintain and features an
Glide® and Road Glide® Ultra seating. Passenger comfort will embossed Bar & Shield logo on the side skirts for a finishing
be maximized with the Tour-Pak® Luggage mounted in the rear touch.
most position. Tallboy seats can be equipped with an optional 51700-09
rider backrest (except Adjustable Style) for additional tour- Fits ’08-later Touring models. Seat width 16.5".
ing comfort.
A. TALLBOY SEAT – ’14-LATER MODELS D. SIGNATURE SERIES SOLO SEAT WITH RIDER BACKREST Shown with:
*Measurements based on Original Equipment Electra Glide (SHOWN WITH MATCHING PASSENGER PILLION)
SIGNATURE SERIES PASSENGER PILLION
seat.
This easy-to-install pillion is designed for long-range passen-
52000252 ger comfort. The wide seating surface and specific-density
Fits ’14-later Touring and Trike models. Not compatible with padding reduce pressure points and spread the weight for
Adjustable Rider Backrest kits. Seat width 16.5"; passenger superior support. The smooth cover matches the Signature
pillion width 15.0". Series Solo Seat and the embossed Bar & Shield logo on the
rear shows everyone that you are riding in style. Add a match-
B. TALLBOY SEAT – ’08-’13 MODELS ing Smooth Passenger Backrest for the complete look.
This Tallboy Seat moves the rider back* to provide much- 52000133
needed arm and leg room for the long-limbed rider. The seat Fits ’14-later Touring models equipped with Solo Seat P/N
height is similar to stock and the slight bucket shape offers 51700-09. Pillion width 15.0".
additional lower back support. Passenger comfort will be
maximized with the Tour-Pak Luggage mounted in the rear- 51770-09
most position. Accepts rider backrest (except Adjustable Fits ’08-’13 Touring models equipped with Solo Seat P/N
Style) for additional touring comfort. 51700-09. Also fits ’14-later Touring models not equipped
with Tour-Pak® Luggage Carrier. Installation on ’12-later
*Measurements based on Original Equipment CVO™ models requires removal of fender trim strips.
Electra Glide seat: Passenger Pillion width 15.0".
’08-’13 models – stock height, 2.0" rearward
’14-later models – stock height, 1.5" rearward E. SUN RAY® HEATED SEAT – ’14-LATER MODELS
52099-09A Chase away the chill on long fall and winter rides. This second-
Fits ’08-’13 Touring and Trike models. Also fits ’14-later generation heated seat features dual-zone heated rider and
Touring models not equipped with Tour-Pak. Does not fit passenger positions with separate high/low/off toggle
models equipped with Adjustable Rider Backrest Kits or controls for personal comfort selection. The one-piece seat
Passenger Grab Rails. Installation on ’12-later CVO™ models with integrated heat pad and control system is simple to install
requires removal of fender trim strips. Seat width 16.0"; and the heating element is switched on/off with the ignition to
passenger pillion width 14.0". avoid draining the battery. Smooth styling complements any
Touring model. Can be used with optional Rider Backrest Kits.
52000135 Vinyl.
TOURING
C. TALLBOY SEAT – ’97-’07 MODELS
This Tallboy one-piece seat moves the rider back .5" and up Fits ’14-later Touring and Tri Glide® models. ’14-’16 models
1.25" compared to the Original Equipment seat. The new posi- require separate purchase of Electrical Harness Extension
tion allows additional leg and arm movement for the long- B. TALLBOY SEAT – ’08-’13 MODELS E. SUN RAY HEATED SEAT – ’14-LATER MODELS P/N 69200722. ’17-later models require Electrical Harness
limbed rider and a comfortable seating space for the open Extension P/N 69201599A. Seat width 15.0"; passenger
road. The bucket design of the Tallboy Seat provides addi- pillion width 15.0".
tional rider back support and the wide raised pillion places the
passenger for maximum comfort and commanding view. Can F. SUN RAY HEATED SEAT – ’97-’07 MODELS
also be used with Rider Backrest Kits. Chase away the chill on long fall and winter rides. This Sun
52975-05 Ray® Heated Seat features dual-zone heated rider and
Fits ’97-’07 Electra Glide® (except FLHX) and Road Glide® passenger positions with separate high/low/off toggle
models. Seat width 17.5"; passenger pillion width 15.0". controls for personal comfort selection. The durable leather
seating surface with embossed ostrich skin pattern covers a
52976-05 deep bucket rider seat and a supportive passenger pillion for
Fits ’97-’07 Road King® and FLHX models. Also fits ’97-’07 cross-country comfort. The one-piece seat with integrated
Electra Glide and Road Glide models equipped with Fuel Tank heat pad and control system is simple to install and the heat-
Console P/N 71288-03A or Trim Piece P/N 52447-96. Seat ing element is switched on/off with the ignition to avoid drain-
width 17.0"; passenger pillion width 16.0". ing the battery. Can be used with Rider Backrest Kits.
51718-06 Leather.
Fits ’97-’07 Electra Glide® (except FLHX) and ’98-’07 Road
Glide® models. Seat width 17.0"; passenger pillion width 16.0".
Tallboy Seats
C. TALLBOY SEAT – ’97-’07 MODELS F. SUN RAY HEATED SEAT – ’97-’07 MODELS
244 TOURING & TRIKE TOURING & TRIKE 245
Seating – Harley® Hammock Seating – Harley® Hammock
ROAD ZEPPELIN® AIR ADJUSTABLE SEATS B. HARLEY® HAMMOCK RIDER AND PASSENGER
The open road. That’s where we developed and tested the revo- TOURING SEAT
lutionary comfort of the Road Zeppelin® Seat. This remarkable Protect the backside of both rider and passenger from harsh
seat removes pressure points and hot spots by adjusting the road conditions. With its revolutionary suspension systems,
amount of air contained in each bladder within the seat. Easy- this Harley® Hammock Rider and Passenger Touring Seat
to-reach rocker switches on the side of the seat control the offers increased isolation from sharp road impacts. For the
built-in compressor, adding and bleeding off air with the quick rider, sling-like fabric suspension system acts like a hammock
push of a button to help relieve stress from the lower back, tail- to reduce impacts and the 2" of traditional foam on top
bone or lower extremities. On a long run, occasionally inflating provides additional support. For the passenger, a multiple
and deflating the air bladders reduces the “numb butt” effect spring-board style suspension system along with 2" of tradi-
by improving the blood flow to the extremities. So grab a seat. tional foam provides 15% improvement in passenger comfort.
And enjoy the ride. When compared to the Hammock Seat offered on select
’14-later CVO™ models, this Hammock Seat reduces the
A. ROAD ZEPPELIN AIR ADJUSTABLE SEAT bucket shape to accommodate a wide variety of rider sizes
The Road Zeppelin seat’s ergonomically friendly design and allows fore-and-aft movement to vary the position on
combines a narrow front nose for ease of touching the ground a long ride. Available with or without dual-zone heated rider
at a stop with a wide seating surface for long-range rider and and passenger seating areas, this seat’s vinyl surface is easy
passenger comfort. The easy-to-clean vinyl seat is finished to clean and maintain. Can be equipped with Rider Backrest
with an embroidered Road Zeppelin logo that lets everyone (sold separately) on most models.
see that you take riding comfort seriously. The slotted seat Standard Harley Hammock Seat
accepts an optional rider backrest or passenger grab rail for
52000566 Without Heat.
additional touring comfort.
Fits ’14-laterTouring and Tri Glide® models. Installation on ’14-
52000201 ’20 Tri Glide models requires removal of grab rail. Seat width
Fits ’08-later Touring and ’09-later Tri Glide® models. ’14-’16 B. HARLEY HAMMOCK RIDER AND PASSENGER TOURING SEAT – 17.0"; passenger pillion width 15.0"
models require separate purchase of Electrical Harness ’14-LATER MODELS 52000567 Without Heat.
Extension P/N 69200722. ’17-later models require Electrical Fits ’09-’13 Touring and Trike models. Also fits ’14-later
Harness Extension P/N 69201599A. Installation on some ’12- Touring models not equipped with Tour-Pak® luggage. Trike
’13 CVO™ models requires removal of fender trim strips. Seat models require separate purchase of Paint Guard Kit P/N
width 20.0"; passenger pillion width 14.5". 52000013. Does not fit models equipped with Passenger
Grab Rail. Installation on ’12-’20 CVO™ models requires
Passenger Zone removal of fender trim strips. Seat width 17.5"; passenger
Press the 3rd button pillion width 15.0".
to inflate and deflate 52000072 Without Heat.
the passenger area, Fits ’97-’07 Electra Glide® and Road Glide® models. Seat
providing maximum width 18.0"; passenger pillion width 15.5".
comfort to the
52000075 Without Heat.
backbone and support
Fits ’97-’07 Road King® and FLHX models. Seat width 18.0";
to the thigh area.
passenger pillion width 15.5".
A.ROAD ZEPPELIN AIR ADJUSTABLE SEAT Heated Harley Hammock Seat
Heated Harley Hammock seats feature switch-activated dual-
zone controls for rider and passenger.
52000564 With Heat.
Fits ’14-later Touring® and Tri Glide models. ’14-’16 models
require separate purchase of Electrical Harness Extension
P/N 69200722. ’17-later models require Electrical Harness
Extension P/N 69201599A. Installation on ’14-’20 Tri Glide
models requires removal of grab rail. Seat width 17.0";
One-piece design
Easy-care top grade accepts rider backrests passenger pillion width 15.0".
Dual-density contoured
vinyl seating surface foam padding 52000565 With Heat.
Fits ’09-’13 Touring and Trike models. Also fits ’14-’20 Touring
Frame-hugging models not equipped with Tour-Pak® luggage. ’14-’16 models
TOURING
composite seat pan require separate purchase of Electrical Harness Extension
P/N 69200722. ’17-later models require Electrical Harness
Lower Back Zones Thigh Zones Extension P/N 69201599A. Trike models require separate
Press the 2nd button (rider Press the 1st button to adjust B. HARLEY HAMMOCK RIDER AND PASSENGER TOURING SEAT – purchase of Paint Guard Kit P/N 52000013. Does not fit
only) to adjust the support in pressure in the two thigh zone
’97-’13 MODELS models equipped with Passenger Grab Rail. Installation on
the lower back zone cham- chambers, improving blood ’12-’20 CVO™ models requires removal of fender trim strips.
bers, relieving pressure flow to lower extremities and Seat width 17.5"; passenger pillion width 15.0".
points in the lower back. adding support to thighs.
C. HARLEY HAMMOCK RIDER TOURING SEAT
This Harley Hammock Seat coddles the rider and supports
his or her weight with a wide seating surface and the revo-
lutionary sling-like fabric suspension system. The passenger
rides on a generous pillion of dual-density foam, shaped for
B. HARLEY® HAMMOCK TOURING SEATS support and long-haul comfort. The Harley Hammock Seat’s
Stay in the saddle all day. These Harley® Hammock Seats vinyl surface is easy to clean and maintain and is finished with
feature broad seating surfaces and a shallow bucket shape a Harley-Davidson raised script logo. Can be equipped with
to distribute the weight and reduce pressure points. Beneath Rider Backrest (sold separately) on most models.
the 2" of traditional dual-density foam, the rider’s weight is 53051-09
supported by a revolutionary fabric suspension system. The Fits ’08 Touring models equipped with Tour-Pak luggage.
sling-like suspension system is integrated into the seat and Flexible Truss
“spring-board” suspension Does not fit models equipped with Passenger Grab Rail. Seat
acts like a hammock, providing 2" of suspension above the width 17.5"; passenger pillion width 15.0".
increases passenger comfort
seat pan. This internal system prevents bottoming out and (some models)
provides a 30% improvement in comfort and endurance over
the long haul by sheltering the rider from pothole and highway
expansion joint impacts. The generous seat length permits
freedom of movement on long rides, making this seat a perfect
option for taller riders.
Dymetrol® elastomer fabric 2" sling suspension travel
support sling provides 12% improvement in
road shock isolation
B. HARLEY HAMMOCK RIDER AND PASSENGER TOURING SEAT C. HARLEY HAMMOCK RIDER TOURING SEAT –
’08 MODELS
246 TOURING & TRIKE TOURING & TRIKE 247
Seating – Heated & Cooled Seating – Heated & Cooled
A. HARLEY® HAMMOCK HEATED & COOLED SEAT B. SUNDOWNER® HEATED & COOLED SEAT
Extend and optimize your riding season thanks to cooling and Extend and optimize your riding season thanks to cool-
heating technology built into this premium seat for Touring ing and heating technology built into this premium seat for
and Trike models. The electronic heating/cooling system is Touring and Trike models. Clever engineering has maintained
self-contained within the seat. The seat can be easily removed the same footprint as the existing Sundowner seats, even
after unplugging a single cord. This seat offers industry-lead- with cooling & heating functionality. The seat can be easily
ing cooling performance, and the heating function has been removed after unplugging a single connection. This seat
improved to reach its selected temperature twice as fast offers industry-leading cooling performance, and the heat-
as previous heated seats. The Hammock seat is our most- ing function has been improved to reach its selected temper-
premium touring seat design, created for the rider who wants ature twice as fast as previous heated seats. The two-up
the ultimate in long-haul comfort. For the rider it features a Sundowner™ Seat is engineered to provide the maximum in
sling-like fabric suspension system that acts like a hammock, long-riding comfort. The deep-bucket design puts most riders
providing two inches of suspension above the seat pan, in an ideal touring posture, and the generous padding makes
topped with an additional two inches of traditional foam cush- it comfortable for both the rider and passenger as the miles
ioning. This internal suspension prevents “bottoming out” and are adding up. Greater comfort reduces fatigue and extends
provides an improvement in comfort and endurance by isolat- the riding season in any climate. In testing with a baseline
ing the rider from harsh road conditions. The passenger posi- ambient temperature of 85 degrees the seat cover will cool
tion features a multiple spring-board style suspension system down by 25 degrees in about 30 minutes, from your 98-degree
along with two inches of traditional foam. This seat really body temperature to about 76 degrees. As you ride, the cool-
improves comfort and reduces fatigue on long rides. Greater ing function draws heat away from your body, which makes
comfort reduces fatigue and extends the riding season in you feel cooler. Dual Zone Control: Rider passenger seating
any climate. In testing with a baseline ambient temperature positions must use the same temperature mode (heat or cool)
of 85 degrees the seat cover will cool down by 25 degrees in but can adjust the level to individual preference or switch the
about 30 minutes, from your 98-degree body temperature to function off. Redesigned heating element reaches selected
about 76 degrees. As you ride, the cooling function draws heat A. HAMMOCK HEATED & COOLED SEAT B. SUNDOWNER® HEATED & COOLED SEAT temperature in only seven minutes. Seam-sealed construc-
away from your body, which makes you feel cooler. Dual Zone tion prevents rain or wash water from infiltrating the seat foam.
Control: Rider passenger seating positions must use the same No riding for hours on a squishy seat. Compatible with Rider
temperature mode (heat or cool) but can adjust the level to Backrest Mounting Kit (P/N 52589-09A)
individual preference or switch the function off. Redesigned 52000463
heating element reaches selected temperature in only seven Fits ‘14-later Touring and Tri Glide® models. ’14-’16 models
minutes. Seam-sealed construction prevents rain or wash require separate purchase of Electrical Harness extension
water from infiltrating the seat foam. No riding for hours on P/N 69200722. ’17-later models require separate purchase of
a squishy seat. Compatible with Rider Backrest Mounting Kit Electrical Harness P/N 69201599A. Installation on 14’-later
(P/N 52589-09A) Tri Glide models require separate purchase of Trike Support
52000462 Bracket P/N 52100063.
Fits ‘14-later Touring and Tri Glide® models. ’14-’16 models
require separate purchase of Electrical Harness extension C. HEATED & COOLED SEAT SUPPORT BRACKET
P/N 69200722. ’17-later models require separate purchase of Support bracket required for installing Harley Hammock
Electrical Harness P/N 69201599A. Installation on ’14-later Heated & Cooled Seat or Sundowner Heated & Cooled Seat
Tri Glide models require separate purchase of Trike Support on Tri Glide models.
Bracket P/N 52100063. 52100063
Fits ‘14-later Tri Glide models. Required for installation of
Harley® Hammock Heated & Cooled Seat P/N 52000462 or
Sundowner Heated & Cooled Seat P/N 52000463.
TOURING
A. HARLEY-DAVIDSON® HAMMOCK HEATED & COOLED SEAT B. SUNDOWNER® HEATED & COOLED SEAT
A. HARLEY-DAVIDSON® HAMMOCK HEATED B. SUNDOWNER® HEATED & COOLED SEAT C. HEATED & COOLED SEAT SUPPORT BRACKET
& COOLED SEAT
248 TOURING & TRIKE TOURING & TRIKE 249
Seating – Sundowner™ Seating – Low Profile
SUNDOWNER™ SEATS E. DRAG SEAT
The Sundowner™ Seat provides the maximum in long-riding For those who live for the moment red lights turn green, the
comfort. The deep-bucket design puts your body in the Drag Seat is destined to keep the rider firmly planted in the
proper touring position and the generous padding makes it bike under hard acceleration and maneuvering. The raised
comfortable for both the rider and passenger as the miles pillion of the Drag Seat provides increased support when you
are adding up. The dished shape provides added rider back need it most. Structural ridges of foam provide increased
support and the wide passenger pillion is shaped to minimize grip without compromising comfort. The exposed light-
pressure points. weight aluminum seat pan provides a rigid foundation for the
seat and offers better rider feedback from the vehicle under
A. SUNDOWNER SEAT – SMOOTH aggressive maneuvering. Seat Width: 12.33” Pillion Width: 9.74”
The smooth cover complements any Touring model. Seat
Fits ’14-later Touring models. Does not fit Trike models. Does
accepts rider backrest for additional touring comfort.
not fit models equipped with Passenger Grab Rails or vehicles
52000128 equipped with Tour-Pak® luggage carrier.
Fits ’14-later Touring and Tri Glide® models. Seat width 14.5";
52000461 Gloss Black Base.
passenger pillion width 13.0".
52000452 Brushed Aluminum Base.
52093-08A A. SUNDOWNER SEAT – SMOOTH E. DRAG SEAT – GLOSS BLACK BASE
Fits ’08-’13 Touring and Trike models. Also fits ’14-later (52000128 SHOWN)
Touring models not equipped with Tour-Pak® luggage.
Installation on ’12-later CVO™ models requires removal of
fender trim strips. Seat width 16.0"; passenger pillion width
14.0".
51726-05
Fits ’97-’07 Road King® and FLHX models. Also fits ’97-’07
Electra Glide® and Road Glide® models equipped with Fuel
Tank Console P/N 71288-03A or Trim Piece P/N 52447-96.
Seat width 15.0"; passenger pillion width 12.0".
51542-01B
Fits ’97-’07 Electra Glide (except FLHX) and Road Glide
models. Seat width 16.0"; passenger pillion width 13.5".
C. SUNDOWNER SEAT – ROAD KING® CLASSIC B. SUNDOWNER SEAT – FREEWHEELER E. DRAG SEAT – GLOSS BLACK BASE
BASKETWEAVE
Decorated with a pleated leather valance and chrome Road
King Classic concho, the seat stays true to Road King Classic
styling. Accepts rider backrest for additional touring comfort.
51615-09A
Fits ’08-’13 Touring and Trike models. Also fits ’14-later
Touring models not equipped with Tour-Pak. Installation on
’12-later CVO models requires removal of fender trim strips.
Seat width 16.0"; passenger pillion width 14.0".
51615-99C
Fits ’97-’07 Road King and FLHX models. Also fits ’97-’07
Electra Glide and Road Glide models equipped with Fuel Tank
Console P/N 71288-03A or Trim Piece P/N 52447-96. Seat
TOURING
width 15.0"; passenger pillion width 12.0".
D. SUNDOWNER SEAT – ’06-’10 STREET GLIDE STITCHING E. DRAG SEAT – BRUSHED ALUMINUM BASE
(51630-09A SHOWN)
250 TOURING & TRIKE TOURING & TRIKE 251
Seating – Low Profile Seating – Low Profile
A. BRAWLER® SOLO SEAT LOW-PROFILE SOLO TOURING SEATS AND PILLIONS
When it’s time to go it alone, go in style. These premium quality Set your custom bagger apart with a Low-Profile Solo Seat that
cowhide leather solo saddles feature a smooth, sleek design combines street-rod style with a surprising touch of comfort.
that hugs the frame rails for a true custom look. The Brawler® Start with a shape that distributes your weight across a wide
seat’s design places the rider “in” the bike for a low-slung surface area to reduce pressure points. Then, add a tapered
riding position, and features a “kick-up” in the rear to hold nose that brings the legs closer together to shorten the reach
the rider in place. The seating position is generally lower than to the ground. The result is the slammed custom seat that
stock, but not as far back as Badlander or other low-profile you crave, with enough comfort and support to let you actu-
seats. The top-grain leather seating surface and contoured ally spend time in the saddle. Finish the look with your choice
foam padding provide a firm but luxurious feel. Seat does not of matching passenger pillion, sissy bar pad and Tour-Pak®
fit with passenger pillions. carrier backrest pad.
52000268
Fits ’08-later Touring models. Does not fit Trike models. Does E. LOW-PROFILE SOLO TOURING SEAT – SMOOTH VINYL
not fit models equipped with Passenger Grab Rails. Does not Wrapped in supple black vinyl, this Low-Profile Solo Seat is
accept rider backrest. Seat width 13.0". shaped to hug the frame and place the rider “in” the bike –
not on top of it. The slight bucket shape cradles the rider, and
A. BRAWLER SOLO SEAT keeps him or her from sliding rearward during acceleration.
B. LEATHER BADLANDER® SEAT
The traditional Badlander® seat’s low and lean style sets the 52000249
stage for your minimalist custom ride. The frame-hugging Fits ’09-later Touring models. Does not fit Trike models. Does
rider seat and the slim tapered passenger pillion visually not accept Rider Backrest. Seat width 15.0".
stretch the bike and enhance the slammed look. The seat
shape stays low along its entire length and follows the lines of Shown with:
the bike with minimal disruption, and delivers a riding position LOW-PROFILE PASSENGER PILLION – SMOOTH VINYL
that is lower and generally farther back than the stock seat. Enveloped in smooth black vinyl, this Passenger Pillion is the
E. LOW-PROFILE SOLO TOURING SEAT – SMOOTH VINYL
Ideal for both short riders needing to be closer to the ground, perfect complement to the Smooth Vinyl Low-Profile Solo
(SHOWN WITH LOW-PROFILE PASSENGER PILLION)
or for tall riders that want to bove back in the bike without Seat. Easy on-and-off installation lets you change from a
sitting higher. This seat is wrapped in supple top-grain leather two-up tourer to a stripped-down cruiser in seconds. Includes
and finished with an embroidered Harley-Davidson script. Kit matching grab strap.
includes leather grab strap and mounting hardware. 52400141
52000257 Fits ’09-later Touring models equipped with Solo Seat
Fits ’08-later Touring models. Does not fit Trike models. P/N 52000249. Pillion width 11.0". Does not fit Trike models.
Installation on ’12-later CVO™ models requires removal of
fender trim strips. Seat width 13.0"; passenger pillion width F. LOW-PROFILE SOLO TOURING SEAT –
6.0". BLACK DIAMOND
Swathed in textured black vinyl, this Low-Profile Solo Seat
C. BADLANDER SEAT features a custom diamond-pleated seating surface high-
Clean smooth covers, subtle top-stitching and a frame- lighted with double-row toast-colored accent stitching. The
hugging profile add up to a statement only Harley could create. rich materials add an elegant finish to your custom bagger.
The low design delivers a reduced seat height that is ideal for 52000248
riders that want the shortest possible reach to the ground, and B. LEATHER BADLANDER SEAT Fits ’09-later Touring models. Does not fit Trike models. Does
the long and lean shape allows tall riders to move back from not accept Rider Backrest. Seat width 15.0".
the hand and foot controls without sitting higher on the bike.
Kit includes grab strap and all mounting hardware. Does not Shown with:
accept a rider backrest. LOW-PROFILE PASSENGER PILLION –
52067-08A BLACK DIAMOND
Fits ’08-later Touring models. Does not fit Trike models. Layered in a combination of smooth and textured black vinyl,
Installation on ’12-later CVO models requires removal of this Passenger Pillion is the perfect complement to the Black
fender trim strips. Seat width 13.0"; passenger pillion width Diamond Low-Profile Solo Seat. Easy on-and-off installation
6.0". lets you change from a two-up tourer to a stripped-down
52066-97C cruiser in seconds. Includes matching grab strap.
Fits ’97-’07 Road King® (except FLHRS) and FLHX models. 52400140
Also fits ’97-’07 Electra Glide® and Road Glide® models Fits ’09-later Touring models equipped with Solo Seat
TOURING
equipped with Fuel Tank Console P/N 71288-03A or Trim P/N 52000248. Pillion width 11.0". Does not fit Trike models.
Piece P/N 52447-96. Seat width 12.25"; passenger pillion
width 4.5". G. LOW-PROFILE SOLO TOURING SEAT –
F. LOW-PROFILE SOLO TOURING SEAT – BLACK DIAMOND
52265-01A MAHOGANY BROWN
(SHOWN WITH LOW-PROFILE PASSENGER PILLION)
Fits ’97-’07 Electra Glide (except FLHX) and Road Glide Finished with a rich textured mahogany-brown vinyl and
models. Seat width 12.5"; passenger pillion width 4.5". upholstered in a custom diamond-pleat pattern with comple-
menting double-row gold stitching, this Low-Profile Solo Seat
D. LEATHER LOW-PROFILE BUCKET SEAT brings a non-traditional look to your Touring model.
A custom-look low and slammed seat, with a bucket contour 52000057
for added support. Features embroidered logo and an opening Fits ’09-later Touring models. Does not fit Trike models. Does
that receives a matching Rider Backrest. not accept Rider Backrest. Seat width 15.0".
C. BADLANDER SEAT
52095-08A
Fits ’08-later Touring and Tri Glide models. Installation on Shown with:
’12-later CVO models requires removal of fender trim strips. LOW-PROFILE PASSENGER PILLION –
Seat width 15.0"; passenger pillion width 8.5". MAHOGANY BROWN
52918-98B Dressed in rich textured brown vinyl and finished with elegant
Fits ’97-’07 Road King® (except FLHRS) and FLHX models. gold stitching, this Passenger Pillion is the perfect comple-
Also fits ’97-’07 Electra Glide and Road Glide models ment to the Mahogany Brown Solo Seat. Easy on-and-off
equipped with Fuel Tank Console P/N 71288-03A or Trim installation lets you change from a two-up tourer to a stripped-
Piece P/N 52447-96. Seat width 15.7"; passenger pillion down cruiser in seconds. Includes matching grab strap.
width 6.5". 52400040
Fits ’09-later Touring models equipped with Solo Seat
P/N 52000057. Pillion width 11.0". Does not fit Trike models.
3 4 5
TOURING
B. RIDER BACKRESTS (SHOWN WITH MOUNTING KIT)
3 4
A. ADJUSTABLE RIDER BACKRESTS (SHOWN WITH MOUNTING KIT) C. RIDER BACKREST ORGANIZER
254 TOURING & TRIKE TOURING & TRIKE 255
Seating – Accessories Seating – Accessories
A. PASSENGER ARMRESTS B. PASSENGER GRAB RAIL
If your passenger is happy, you’ll be happy. Premium passen- Add comfort and confidence for your riding companion. This
ger armrests have been ergonomically designed to provide the easy-to-install handrail provides a convenient hand grip
ultimate in passenger comfort. The soft pads provide excel- for your passenger and a secure tie-down point for pillion-
lent forearm support on a long ride and eliminate the passen- mounted touring luggage.
ger’s “what do I do with my hands” dilemma. Both armrests
conveniently swing out of the way for easy mounting and Fits ’14-later Touring and Tri Glide® models. Does not fit models
dismounting and the pads and arms can be oriented in multi- equipped with Tallboy® Seat P/N 52000134 or Passenger
ple positions for increased comfort. The armrest pads feature Armrest Kit P/N 52400073 or FLHTKSE and FLTRUSE models
spring-loaded hinged storage compartments that can easily with Original Equipment seat.
hold your compact personal items. The high-quality black 52400090 Chrome.
vinyl upholstered pads and support arms blend beautifully 52400091 Gloss Black.
with Original Equipment seats and speaker pods. Complete
kit includes all required installation hardware. C. PASSENGER HANDRAIL COVERS
52400073 Beef up the look of the passenger handrail with these easy-to-
Fits ’14-later Touring models equipped with Hard Tour-Pak® install chrome-plated grips. The thick diameter offers a firm
Luggage (except CVO™ models). Also fits with H-D® and comfortable hand hold for your passenger and features
Detachables™ Tour-Pak Mounting Racks. Does not fit Trike jet black rubber inserts, ball-milled grooves and Bar & Shield
models or vehicles with saddlebag lid rails or passenger logo for added style. Kit includes right and left grip and stain-
grab rail. less steel mounting hardware.
52400106 91668-05
Fits ’09-later FLHTCUTG models. Not compatible with Fits ’99-’13 Touring models equipped with Passenger Grab
Boom!™ Audio Trike Body-Mount Speaker Kit P/N 76000618. Rails.
B. PASSENGER GRAB RAIL – CHROME B. PASSENGER GRAB RAIL – GLOSS BLACK
(52400090 SHOWN) (52400091 SHOWN) D. QUICK-RELEASE SEAT HARDWARE KIT
This Quick-Release Hardware Kit allows the rider to remove
one-piece Harley-Davidson® seats quickly and easily. The
knurled knob is easy to install or remove without tools, and
the nylon washer keeps the finger tightened knob in place and
rattle free. A raised-logo Harley-Davidson® emblem finishes
the look. SAE 1/4"-20 thread.
Fits ’97-later XG, XL, Dyna®, Softail® (except ’12-’17 FLS
models equipped with Original Equipment seat), Touring and
Trike models equipped with SAE 1/4"-20 seat mount hard-
ware. Does not fit seats equipped with spring-loaded rear seat
bracket.
51676-97A Chrome.
10500093 Gloss Black.
TOURING
A. PASSENGER ARMRESTS (52400073 SHOWN) B. PASSENGER GRAB RAIL C. PASSENGER HANDRAIL COVERS
A. PASSENGER ARMRESTS – A. PASSENGER ARMRESTS D. QUICK-RELEASE SEAT HARDWARE KIT – E. SEAT MOUNTING NUTS – GLOSS BLACK
STORAGE COMPARTMENT (52400073 SHOWN) GLOSS BLACK
256 TOURING & TRIKE TOURING & TRIKE 257
Seating Accessories Seating Accessories
A. ROAD ZEPPELIN® SEAT PAD B. CIRCULATOR SEAT AND BACKREST PADS
Experience ultimate comfort. Designed to ensure hours of Keep comfortable on your next long ride. These breathable
comfort in the saddle, Road Zeppelin® Seat Pads are equipped Circulator Seat and Backrest Pads feature 3D construc-
with a unique air bladder system that allows your weight to be tion that promotes air movement and reduces heat buildup
supported evenly across the entire seating surface. Whether where the rider’s body touches the seat or backrest. Designed
you have a low-profile seat or a larger, more comfortable seat, to keep the rider cool by reducing the perspiration buildup
you will feel the benefits. This air bladder system is designed between you and the seating surface, the Circulator Pad can
to reduce pressure points, provide shock absorption and be installed and removed in seconds for easy cleaning. The
reduce vibration. Unlike other mouth-inflated seat pads, the low-profile design minimizes seat-height change compared
Road Zeppelin Pad features an easy-to-reach integrated hand to inflatable pads, while enhancing comfort with its shock-
pump and metered air release valve that permits quick and absorbing construction. Manufactured of UV-stable materi-
controllable adjustment. You can easily adjust the comfort als, these seat and backrest pads resist fading when exposed
and support while seated on the pad. The UV-stable and snag- to the sun. Elastic under-seat strap and non-slip base provide
resistant mesh cover allows air to circulate beneath the rider’s secure installation and the available Circulator Passenger
body, reducing the temperature trapped between the rider Pillion Pad attaches to the rider pad with hook-and-loop tabs.
and seat. Shaped to conform to most Harley-Davidson® seats, 51076-10 Large Seat Pad.
the pads feature adjustable mounting straps and a non-skid A. ROAD ZEPPELIN SEAT PAD
Fits Softail®, Touring and Trike models with Original
surface to keep them in place. The hand-washable seat pad Equipment and accessory seats. Will not fit Bobber or Road
can be deflated and rolled for compact storage. Zeppelin® seats. 16.0" wide.
52000327 Rider. 51078-10 Passenger Pillion Pad.
Fits rider position on all models equipped with Original Fits Original Equipment and accessory passenger pillions.
Equipment or accessory seats. Also fits passenger position 13.0" wide.
on Touring models with large pillion area. Pad width – 14.0".
52300103 Wide Backrest Pad.
52400162 Passenger. B. CIRCULATOR SEAT PADS (ROAD KING SHOWN) Fits wide profile Rider and Passenger Backrest Pads up to
Fits Original Equipment and accessory passenger pillions. 12.0" wide and 9.0" tall.
Pad length – 12.0"; width – 9.0".
52300105 Tour-Pak® Wrap Around Backrest.
Fits Tour-Pak Wrap Around Passenger Backrest Pads.
C. RAIN COVERS*
Featuring a handy storage sack, this black nylon, water-resis-
tant, Cordura® cover packs easily and shelters your seat from
the storm.
51638-97 Solo Seat.
Fits H-D® solo seats (except XR and FLSTS).
52952-97 Seat with Rider Backrest.
Fits H-D Touring and Trike seats. Fits with accessory rider
backrest.
A. ROAD ZEPPELIN SEAT PAD A. ROAD ZEPPELIN SEAT PAD D. FLHT/FLTR TRIM PIECE
This top-stitched trim piece opens a new world to the Standard
Electra Glide® and Road Glide® model owners, allowing fitment
of Road King® seats.
12 air pockets are designed to reduce 52447-96 Fits ’94-’07 FLHT and FLTR models.
Mesh cover permits air circulation to pressure points and spread the rider’s
reduce temperature trapped between the weight across a wide surface.
rider and the seat.
TOURING
Hand-washable seat pad can be interconnected to create a
deflated and rolled for compact balanced air cushion for
storage. optimal support. B. CIRCULATOR BACKREST PAD – WIDE B. CIRCULATOR BACKREST PAD –
WRAP AROUND
TOURING
Two-Up Tour-Pak Rack P/N 53276-04A 53804-06 1&2
A. QUICK-RELEASE SISSY BAR UPRIGHT – FREEWHEELER MODELS D. H-D DETACHABLES DOCKING HARDWARE KIT – ’97-’08 TOURING MODELS Solo Luggage Rack P/N 53048-06 53803-06 3&4
GLOSS BLACK
E. LOCKING H-D DETACHABLES LATCH KIT
This unique lock replaces the camlock on your H-D
Detachables accessories, providing additional security and
peace of mind when parking your vehicle. The kit includes two
extended-reach barrel-style keys for easy access to the lock.
Key registration and replacement service is available.
Fits all models equipped with detachable Sideplates, Racks
and Tour-Pak Luggage Carriers (except ’18-later Softail®
models with HoldFast™ racks and uprights or ’09-later Touring
models equipped with detachable Solo Tour-Pak Rack).
90300087 Chrome.
90300086 Black.
B. AIR WING LUGGAGE RACK – FREEWHEELER MODELS E. LOCKING H-D DETACHABLES LATCH KIT F. H-D DETACHABLES LATCH KIT –
CHROME
260 TOURING & TRIKE TOURING & TRIKE 261
Backrests & Racks Backrests & Racks
A. H-D® DETACHABLES™ SISSY BAR UPRIGHT B. PREMIUM H-D® DETACHABLES™ BACKREST WITH
A sissy bar and passenger backrest pad is the starting point for ADJUSTABLE RECLINE
building a complete touring machine. The backrest provides Enhance your passenger’s ride with an adjustable passen-
long-range comfort and support and adds a feeling of confi- ger backrest. This adjustable backrest allows the passenger
dence and control for the passenger. Available in your choice to change the recline angle for maximum comfort. Simply
of height, these H-D® Detachables™ One-Piece Uprights can turn the glove-friendly locking knobs and adjust the upright to
be installed or removed in seconds to add versatility to your one of three different recline settings. The 3 position settings
ride. A wide variety of Backrest Pads are available for sepa- provide 16 degrees of adjustment, with the mid position that
rate purchase. matches a standard backrest recline. The exclusive cam
lock H-D® Detachables™ design lets you add or remove the
Fits ’09-later Touring models equipped with required Docking passenger backrest assembly in seconds. Available in chrome
Hardware Kits. ’09-later Touring models equipped with rigid- and gloss black finishes.
mount Tour-Pak® luggage require purchase of appropriate H-D
Detachables Tour-Pak Conversion Kit. Fits ’09-later Touring models equipped with required Docking
52610-09A Short – Chrome. Hardware Kits (except models equipped with Stealth Detach
Luggage Rack). ’09-later Touring models equipped with rigid-
54248-09A Short – Gloss Black.
mount Tour-Pak® luggage require purchase of appropriate H-D
52627-09A Standard-Height – Chrome. Detachables Tour-Pak Conversion Kit.
54247-09A Standard-Height – Gloss Black. 52300257 Standard-Height – Chrome.
Fits ’97-’08 Road King®, FLHT, FLHX and FLTR models 52300258 Standard-Height – Gloss Black.
equipped with required Docking Kits. Fits ’06-’08 FLHTC
models equipped with H-D Detachables Tour-Pak Rack
Mounting Kit P/N 53303-07A and Docking Hardware Kit
P/N 53803-06.
A. H-D DETACHABLES SISSY BAR UPRIGHT – B. PREMIUM H-D DETACHABLES BACKREST WITH ADJUSTABLE RECLINE
52933-97C Standard-Height – Chrome. ’09-LATER TOURING MODELS
52723-06A Tall – Chrome.
TOURING
A. SHORT H-D DETACHABLES SISSY BAR A. STANDARD-HEIGHT H-D DETACHABLES B. PREMIUM H-D DETACHABLES BACKREST WITH ADJUSTABLE RECLINE – CHROME
UPRIGHT – GLOSS BLACK SISSY BAR UPRIGHT – CHROME
Tall 13.5"
Standard-Height 12"
Standard 11.5"
Short 9"
A. H-D DETACHABLES SISSY BAR UPRIGHT – A. H-D DETACHABLES SISSY BAR UPRIGHT – B. PREMIUM H-D DETACHABLES BACKREST WITH ADJUSTABLE RECLINE – GLOSS BLACK
’09-LATER MODELS ’97-’08 MODELS
262 TOURING & TRIKE TOURING & TRIKE 263
Backrests & Racks Backrests & Racks
A. PASSENGER BACKREST PAD – COMPACT D. SHORT PASSENGER BACKREST PAD – SMOOTH LOOK
Sized to complement low-profile custom seats, this Compact Smooth top-stitched pad complements most seating surfaces.
Passenger Backrest Pad combines practical passenger 51579-05A
support with custom compact style. Pads include mounting Fits Short H-D® Detachables™ Passenger Sissy Bar Upright
bracket and hardware required for attachment to sissy bar P/N 52935-04A, 52610-09A or 54248-09A. Also fits ’18-later
upright. Softail® models equipped with Short or Standard Height
Fits ’18-later Softail® models equipped with Short or Standard HoldFast™ Sissy Bar Uprights. Will not fit seats with tall
Height HoldFast™ Sissy Bar Uprights. Also fits Touring models passenger pillion pads. Pad height 6.5"; width 10.5".
equipped with Short H-D® Detachables™ Passenger Sissy Bar
Upright P/N 52935-04A, 52610-09A or 54248-09A. Will not fit E. SHORT PASSENGER BACKREST PAD –
seats with tall passenger pillion pads. Pad height 3.75"; width MAHOGANY BROWN
6.5". Dressed in rich textured brown vinyl and finished with elegant
gold stitching, this Short Passenger Backrest Pad is the
52300559A Smooth Black Vinyl. perfect complement to the Mahogany Brown Seat and Pillion
52300558A Fat Bob Styling. collection. Styled to match the ’12 FLTRXSE model.
52300556A Fat Boy Styling. A. PASSENGER BACKREST PAD – COMPACT D. SHORT PASSENGER BACKREST PAD – E. SHORT PASSENGER BACKREST PAD – 52300141A
(52300559A SHOWN) SMOOTH LOOK MAHOGANY BROWN Fits Short H-D Detachables Passenger Sissy Bar Upright
B. PASSENGER BACKREST PAD – MID-SIZED P/N 52935-04A, 52610-09A or 54248-09A. Will not fit seats
Sized to fit both Low and Standard-Height HoldFast Sissy with tall passenger pillion pads. Also fits ’18-later Softail®
Bar Uprights, these Mid-Sized Backrest Pads feature a gentle models equipped with Short or Standard Height HoldFast™
curved shape that cradles the spine and provides hours of Sissy Bar Uprights. Pad height 6.5"; width 10.5".
passenger comfort. Pad height 7.0"; width 6.5".
F. SHORT PASSENGER BACKREST PAD – CVO™ STREET
Fits ’18-later Softail models equipped with Standard Height
GLIDE® & CVO ROAD GLIDE® MODEL STYLING
HoldFast Sissy Bar Uprights. Also fits Touring models
Matches ’18 or ’19 CVO™ styling.
equipped with Standard-Height H-D Detachables Passenger
Sissy Bar Uprights P/N 52300324, 52627-09A, 54247-09A, Fits Short H-D Detachables Passenger Sissy Bar Upright
52933-97C or 52805-97B, Tall H-D Detachables Passenger P/N 52935-04A, 52610-09A or 54248-09A. Also fits ’18-later
Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Softail models equipped with Short or Standard Height
Sissy Bar Upright 52300257 or 52300258. HoldFast Sissy Bar Uprights. Will not fit seats with tall passen-
52300560 Smooth Black Vinyl. ger pillion pads. Pad height 6.5"; width 10.5"
52300557 Low Rider Styling. 52300573 ’19 CVO models.
52300566 ’18 CVO models.
C. COMPACT PASSENGER BACKREST PAD
Sized to complement low-profile custom seats, this Compact G. SHORT PASSENGER BACKREST PAD – CVO ROAD
Leather Backrest Pad combines practical passenger support GLIDE® CUSTOM STYLING
with custom compact style. The leather cover with smooth Matches ’13 CVO Road Glide® Original Equipment seat. (except
insert complements both synthetic and leather seating the 110th Anniversary edition CVO ’13 FLTRXSE).
surfaces.
52300300
52408-07A A. COMPACT PASSENGER BACKREST PAD A. COMPACT PASSENGER BACKREST PAD F. SHORT PASSENGER BACKREST PAD – F. SHORT PASSENGER BACKREST PAD – Fits Short H-D Detachables Passenger Sissy Bar Upright
Fits Short H-D Detachables Passenger Sissy Bar Upright P/N (52300558A SHOWN) (52300556A SHOWN) ’19 CVO STYLING ’18 CVO STYLING
P/N 52935-04A, 52610-09A or 54248-09A. Will not fit seats
52935-04A. Also fits H-D Detachables Passenger Sissy Bar with tall passenger pillion pads. Also fits ’18-later Softail
Upright P/N 52610-09A or 54248-09A with purchase of Billet models equipped with Short or Standard Height HoldFast
Backrest Pad Mount P/N 53086-04 or Styled Backrest Pad Sissy Bar Uprights. Pad height 6.5"; width 10.5".
Mount P/N 52825-05. Also fits ’18-later Softail models
equipped with Short or Standard Height HoldFast™ Sissy Bar H. SHORT PASSENGER BACKREST PAD – CVO STREET
Uprights. Will not fit seats with tall passenger pillion pads. GLIDE CUSTOM STYLING
Pad height 6.5"; width 10.5". Matches ’15 CVO Street Glide® Original Equipment seat.
52300361
Fits Short H-D Detachables Passenger Sissy Bar Upright
P/N 52935-04A, 52610-09A or 54248-09A. Will not fit seats
with tall passenger pillion pads. Also fits ’18-later Softail
TOURING
models equipped with Short or Standard Height HoldFast
Sissy Bar Uprights. Pad height 6.5"; width 10.5".
TOURING
Upright P/N 52723-06A, Premium H-D Detachables Sissy or 52300147.
Bar Upright 52300257 or 52300258. Also fits ’18-later Softail
models equipped with Short or Standard Height HoldFast
Sissy Bar Uprights. Pad height 9.5"; width 13.5". H. ADJUSTABLE TWO-UP LUGGAGE RACK – H. ADJUSTABLE TWO-UP LUGGAGE RACK –
CHROME (CLOSED) CHROME (OPEN)
F. OVERSIZED PASSENGER BACKREST PAD – SMOOTH
Smooth top-stitched pad complements most seating surfaces.
52886-98D
F. OVERSIZED PASSENGER BACKREST PAD – G. OVERSIZED PASSENGER BACKREST PAD – H. ADJUSTABLE TWO-UP LUGGAGE RACK – I. LED LIGHT KIT
SMOOTH STUDDED GLOSS BLACK (OPEN)"
266 TOURING & TRIKE TOURING & TRIKE 267
Backrests & Racks Backrests & Racks
A. AIR WING H-D® DETACHABLES™ TWO-UP C. KING H-D® DETACHABLES™ TWO-UP LUGGAGE RACK*
LUGGAGE RACK* This stylish oversized King Two-Up Luggage Rack adds extra
The low-profile aerodynamic styling defines the look of capacity for your cross-town or cross-country ride. The classic
this Luggage Rack. Designed to work with or without H-D® harp-shaped rack is constructed of large diameter steel rod,
Detachables™ Passenger Backrests, this rack can be installed welded and perfectly polished for an elegant look. This rack is
or removed from the Docking Hardware in seconds, creating first in class with an increased load capacity up to 30 pounds.
a truly versatile ride. Available in mirror chrome or rich gloss The large rack with side extensions offers a versatile flat load
black finish, the rack draws your eye with its sleek lines and the surface and the slotted side plates provide options for secur-
engraved Harley-Davidson script adds a signature touch. The ing soft or rigid carrying bags. Designed to work with or with-
die-cast wing and lightweight steel tubing are hand-polished out a H-D® Detachables™ Passenger Backrest, the rack can be
before finishing for long-lasting beauty. For added visibility, the installed or removed from the bike in seconds.
rack is designed to incorporate the internal wiring of the Air
Wing Rack Light Kit (sold separately) for a clean look. Fits ’09-later Touring models equipped with 4-point Docking
Hardware Kits. ’09-later Touring models equipped with rigid-
Fits ’09-later Touring models equipped with 4-point Docking mount Tour-Pak® luggage require purchase of appropriate
Hardware Kits. ’09-later Touring models equipped with rigid- H-D Detachables Tour-Pak Conversion Kit. FLHX, FLHXS, FLTR
mount Tour-Pak® luggage require purchase of appropriate H-D and FLTRX models require separate purchase of Antenna
Detachables Tour-Pak Conversion Kit. FLHX, FLHXS, FLHXST, Relocation Kit or Hidden Antenna Kit. Some FLHRC EU regis-
FLTR, FLTRX and FLTRXST models require separate purchase tration plates may interfere with rack.
of Antenna Relocation Kit or Hidden Antenna Kit. Some 50300054A Chrome.
FLHRC EU registration plates may interfere with rack.
50300058A Gloss Black.
54283-09A Chrome.
50300008A Gloss Black. D. STEALTH H-D DETACHABLES TWO-UP LUGGAGE
RACK*
B. LED LIGHT KIT** A. AIR WING H-D DETACHABLES TWO-UP LUGGAGE RACK – CHROME C. KING H-D DETACHABLES TWO-UP C. KING H-D DETACHABLES TWO-UP Style and practicality in one. This classic four-bar H-D
Fast-acting LED Light Kit operates as a supplemental rear
LUGGAGE RACK – CHROME LUGGAGE RACK – GLOSS BLACK Detachables Luggage Rack flows with the long and lean
running light and brake light. The high, center-mount position lines of today’s custom rides. The rails and curving support
places the light in the line-of-sight of following vehicles and blend together for an integrated floating look and the “stealth”
the bright, fast-acting red LED lamps get you noticed. Wiring hidden hardware adds to the clean design.
is concealed inside the rack for a clean, custom installation.
Available with red or smoked lens. Fits ’09-later Touring models equipped with 4-point Docking
Hardware Kits (except ’09-later Touring models equipped with
Fits ’14-later Touring models equipped with Air Wing H-D Premium H-D Detachables Backrest with Adjustable Recline
Detachables Luggage Rack P/N 54283-09A and 50300008A P/N 523000257 and 523000258). ’09-later Touring models
and Adjustable Two-Up Luggage Rack P/N 50300044B or equipped with rigid-mount Tour-Pak luggage require purchase
50300076B. Does not fit CVO™ models. of appropriate H-D Detachables Tour-Pak Conversion Kit.
68000111 Red Lens. FLHX, FLHXS, FLTR and FLTRX models require separate
purchase of Antenna Relocation Kit or Hidden Antenna Kit.
68000116 Smoked Lens. Some FLHRC EU registration plates may interfere with rack.
Also available: 53472-09A Chrome.
LED LIGHT KIT WIRING HARNESS 53566-09A Gloss Black.
Required for installation of optional LED Light Kit on Luggage
Racks and Passenger Backrests. E. H-D DETACHABLES TWO-UP LUGGAGE RACK*
69200772 Smooth sweeping curves and a brilliant chrome finish defines
Fits ’14-later Touring and Trike models equipped with the look of this Luggage Rack. Available in chrome or gloss
Adjustable Luggage Rack P/N 50300044B or 50300076B, black finish, this sleek and functional rack is an elegant solu-
Air Wing Racks P/N 54283-09A, 50300008A, 79179-08 or tion for carrying your luggage across the country. Designed to
53000062 and Air Wing Passenger Backrests P/N 52300146 work with or without H-D Detachables Passenger Backrests,
or 52300147. this rack can be installed or removed from the Docking
Hardware in seconds, creating a truly versatile ride.
Fits ’09-later Touring models equipped with 4-point Docking
Hardware Kits. ’09-later Touring models equipped with rigid-
mount Tour-Pak luggage require purchase of appropriate H-D
TOURING
Detachables Tour-Pak Conversion Kit. FLHX, FLHXS, FLHXST,
FLTR, FLTRX and FLTRXST models require separate purchase
A. AIR WING H-D DETACHABLES TWO-UP LUGGAGE RACK – GLOSS BLACK D. STEALTH H-D DETACHABLES LUGGAGE D. STEALTH H-D DETACHABLES LUGGAGE of Antenna Relocation Kit or Hidden Antenna Kit. Some
RACK – CHROME RACK – GLOSS BLACK FLHRC EU registration plates may interfere with rack.
54215-09A Chrome.
50300042A Gloss Black.
A. AIR WING LUGGAGE RACK B. LED LIGHT KIT E. H-D DETACHABLES TWO-UP LUGGAGE F. H-D DETACHABLES TWO-UP LUGGAGE
(SHOWN WITH LED LIGHT KIT) RACK – CHROME RACK – GLOSS BLACK
268 TOURING & TRIKE TOURING & TRIKE 269
Tour-Pak® Accessories Tour-Pak® Accessories
A. RAZOR-PAK LUGGAGE CHOPPED TOUR-PAK® LUGGAGE BACKREST PADS
The ultimate in touring style. The slim but surprisingly roomy Chopped Tour-Pak® Luggage Backrest Pads provide deep
Razor-Pak Luggage is designed to add convenient luggage- padded support for your passenger and a low-profile shape
carrying capacity without distracting from the lean look of that complements the low, lean look of your Tour-Pak luggage.
your custom bagger. Ideal size to carry a briefcase, laptop Easy to install, the floating design of the integrated mounts
computer or a change of clothes, the locking Razor-Pak top reduce the contact between the pad and the Tour-Pak carrier
case can actually swallow compact half helmets and some to minimize paint scuffing. Chopped Backrest Pads are avail-
lightweight riding gear. So, get in a good day at the office, able in a wide variety of styles to match most seating surfaces.
change your gear and hit Main Street in style. Razor-Pak
Luggage can be mounted to rigid or H-D® Detachables™ Tour- D. CHOPPED TOUR-PAK LUGGAGE BACKREST PAD –
Pak® mounting racks and accepts many of the lid racks, trim, SMOOTH
spoilers and other accessories available for Chopped and King Clean, smooth styling complements most seating surfaces.
Tour-Pak Luggage. Capacity 1,900 cubic inches
52300319
79175-10DH Vivid Black. Fits ’14-later Touring and Tri Glide® models equipped with
Fits ’97-’13 Touring and Trike models. FLHTCUTG models Chopped Tour-Pak luggage.
require addition of Spacer Kit P/N 83294-10. FLHXXX 52898-98A
models require addition of Tour-Pak Rack Kit P/N 54144-10 Fits ’97-’13 Touring models equipped with Chopped
and Spacer Kit P/N 83294-10. Tour-Pak luggage.
Shown with:
E. CHOPPED TOUR-PAK BACKREST PAD – ’19 CVO™
RAZOR-PAK BACKREST PAD – SMOOTH MODELS STYLING
Clean, smooth styling complements most seating surfaces. Matches ’19 CVO™ Original Equipment seat.
79192-10
52300572
Fits ’97-’13 models equipped with Razor-Pak luggage. A. RAZOR-PAK LUGGAGE D. CHOPPED TOUR-PAK BACKREST PAD – E. CHOPPED TOUR-PAK BACKREST PAD – Fits ’14-later Touring and Tri Glide models equipped with
(SHOWN WITH H-D DETACHABLES TWO-UP TOUR-PAK RACK AND BACKREST PAD) SMOOTH ’19 CVO STYLING Chopped Tour-Pak luggage.
B. TOUR-PAK® LUGGAGE ’14-LATER MODELS
Add cross-county luggage capacity to your ride with accessory F. CHOPPED TOUR-PAK BACKREST PAD – CVO STREET
Tour-Pak® Luggage. A cavernous interior will hold one full-face GLIDE® & CVO ROAD GLIDE® MODELS STYLING
helmet or two half helmets. Kit includes backrest pad, inte- Matches ’18 CVO Street Glide® and Road Glide® Original
rior rubber mat, hardware and instructions. Luggage capac- Equipment seat.
ity: 2,500 cubic inches. Dimensions: 18.5" W x 17.0" D x 13.0" H.
Racks and docking kits sold separately. International models 52300567
may require separate purchase of License Plate Relocation Fits ’14-later Touring models equipped with Chopped Tour-
Kit P/N 60095-00A. Pak luggage.
Fits ’04-later XL (except XL883N, XL1200C, XL1200CX, G. CHOPPED TOUR-PAK BACKREST PAD – CVO STREET
XL1200N and XL1200T) equipped with Solo Tour-Pak Rack, GLIDE STYLING
’00-’17 Softail® (except FLS, FLSS, FLSTNSE, FLSTSE, FXCW, Matches ’15-’16 CVO™ Street Glide Original Equipment seat.
FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD and ’09 FXSTSSE) 52300359
equipped with H-D Detachables Solo or Two-Up Tour-Pak Rack Fits ’14-later Touring and Tri Glide models equipped with
and ’97-’13 Touring models equipped with H-D Detachables Chopped Tour-Pak luggage.
Two-Up or Solo Tour-Pak Racks.
53147-98C H. RAZOR-PAK BACKREST PAD – SMOOTH
Road King Classic Leather Styling. Clean, smooth styling complements most seating surfaces.
53690-06A 79192-10
Smooth Vinyl. Fits ’97-’13 models equipped with Razor-Pak luggage.
TOURING
lation hardware. Special order keyed-to-match lock sets are
available for models with barrel-type keys. Contact your Dealer
with your vehicle key code. B. ROAD KING CLASSIC LEATHER TOUR-PAK LUGGAGE F. CHOPPED TOUR-PAK BACKREST PAD – G. CHOPPED TOUR-PAK BACKREST PAD –
54360-05 ’18 CVO STYLING ’15 CVO STREET GLIDE STYLING
Fits models equipped with Leather or Synthetic Leather Tour-
Pak Luggage (except P/N 79189-06, 53000570, 53000598
or 53000599).
B. SMOOTH VINYL TOUR-PAK LUGGAGE C. LEATHER TOUR-PAK LOCK SET H. RAZOR-PAK BACKREST PAD – SMOOTH
270 TOURING & TRIKE TOURING & TRIKE 271
Tour-Pak® Luggage Accessories Tour-Pak® Luggage Accessories
KING TOUR-PAK® LUGGAGE BACKREST PADS D. KING TOUR-PAK® LUGGAGE BACKREST PAD – ’19
Wrap-around King Tour-Pak® Luggage Backrest Pads are CVO™ MODELS STYLING
shaped to surround your passenger in comfort. The curved Matches ’19 CVO™ Original Equipment seat.
shape cradles the back and the integrated side wings fit natu- 52300574
rally beneath your passenger’s arms for added support. These Fits ’14-later Touring and Tri Glide® models equipped with
backrests feature easy-to-install isolation mounts to reduce King Tour-Pak® Luggage.
contact between the pad and the Tour-Pak luggage. King
Backrest Pads are available in a variety of styles to match most E. KING TOUR-PAK LUGGAGE BACKREST PAD – CVO
seating surfaces. STREET GLIDE STYLING
Matches ’15-’16 CVO Street Glide® Original Equipment seat.
A. SUN RAY® HEATED KING TOUR-PAK® LUGGAGE
52300360
BACKREST PAD
Fits ’14-later Touring and Tri Glide models equipped with King
Take the chill out of cool spring days and brisk fall nights
Tour-Pak Luggage.
with a heated wrap-around backrest pad. The Sun Ray® Pad
features a convenient high/low/off toggle control that directs
two levels of soothing warmth right where you need it. This F. KING TOUR-PAK LUGGAGE BACKREST PAD – CVO
one-piece pad with integrated heat element and thermostatic ROAD KING® MODEL STYLING
control system is simple to install and the heating element Matches ’14 CVO Road King® Original Equipment seat.
is switched off with the ignition to avoid draining the battery. 52300334
Available in Smooth or Comfort Stitch styles, this pad can be Fits ’14-later Touring and Tri Glide models equipped with
teamed with a Sun Ray or Harley® Hammock Heated Seat for King Tour-Pak Luggage.
the ultimate in back and bottom comfort.
52300317 Comfort Stitch.
Fits ’14-later Touring and Tri Glide® models equipped with A. SUN RAY HEATED KING TOUR-PAK BACKREST PAD – COMFORT STITCH D. KING TOUR-PAK BACKREST PAD – ’19 CVO STYLING
King Tour-Pak® luggage. ’14-’16 models require separate ’14-LATER MODELS
purchase of Electrical Harness Extension P/N 69200722. ’17-
later models require Electrical Harness Extension P/N
69201599A.
TOURING
B. KING TOUR-PAK BACKREST PAD – B. KING TOUR-PAK BACKREST PAD – E. KING TOUR-PAK BACKREST PAD –
COMFORT STITCH COMFORT STITCH ’15 CVO STREET GLIDE STYLING
’14-LATER MODELS ’97-’13 MODELS
C. KING TOUR-PAK BACKREST PAD – C. KING TOUR-PAK BACKREST PAD – F. KING TOUR-PAK BACKREST PAD –
SMOOTH SMOOTH LEATHER ROAD ZEPPELIN STYLING
’14-LATER MODELS ’97-’13 MODELS
272 TOURING & TRIKE TOURING & TRIKE 273
Tour-Pak® Racks Tour-Pak® Racks
H-D® DETACHABLES™ TOUR-PAK® LUGGAGE B. H-D® DETACHABLES™ TWO-UP TOUR-PAK® LUGGAGE
MOUNTING RACKS MOUNTING RACK*
Fully loaded, stripped down or anywhere in between, you can Change your riding style in less than 60 seconds. The ulti-
tailor your Harley-Davidson® Touring motorcycle to meet the mate in touring flexibility, this Tour-Pak® Luggage Rack makes
demands of the highway. With H-D® Detachables™ docking the convenience and protection of a Razor-Pak, Chopped,
hardware, you can transform your ride in the blink of an eye. King or Leather Tour-Pak Luggage System a simple on-and-
Switch from a comfortable passenger backrest to load-haul- off proposition. Simple turn latches mount the rack to the
ing Tour-Pak® luggage in seconds. You can easily remove the bike’s docking points and allow you to replace the Tour-Pak
Tour-Pak luggage for easy maneuverability around town and luggage with a detachable sissy bar upright for around-town
reinstall it for an epic ride across the country. It’s your choice cruising. The mounting rack positions a Tour-Pak behind the
and Harley-Davidson provides the flexibility to do it your way. passenger pillion and allows the passenger to use the luggage
as a supporting backrest. Adjustable over a .75" range, the
A. H-D DETACHABLES SOLO TOUR-PAK LUGGAGE Tour-Pak can be located for maximum passenger room and
MOUNTING RACK* comfort. Tour-Pak, Passenger Backrest Pad and Docking
The Solo Tour-Pak luggage Rack moves a Razor-Pak, Chopped Hardware Kit sold separately.
or King Tour-Pak luggage forward to a comfortable back-
Fits ’14-later FLHR, FLHRC, FLHRXS, FLHRSE, FLHT, FLHX,
supporting position. The rack is designed to position the Tour-
FLHXS, FLHXSE, FLHXST, FLTRXST, FLTRX and FLTRXS
Pak luggage for solo riding and is adjustable over a .75" range.
models. Requires separate purchase of Docking Hardware
Simply remove the Tour-Pak luggage from the convenient H-D®
Kit. Street Glide® and Road Glide® models require Hidden AM/
Detachables™ docking hardware, add a passenger pillion and
FM/WB Antenna P/N 76000862 or Antenna Relocation Kit
the bike is ready for two-up riding. Tour-Pak, Backrest Pad and
P/N 76000582. Does not work with Boom!™ Audio Stage II
Docking Hardware sold separately.
Tour-Pak Speaker Kit P/N 76000526A.
53000225 Chrome.
53000221 Chrome.
Fits ’14-later Touring models equipped with a solo seat. All RACK INSTALLED RACK REMOVED B. H-D DETACHABLES TWO-UP TOUR-PAK MOUNTING RACK – CHROME
models require separate purchase of Docking Hardware Kit 53000459 Gloss Black.
and Hidden AM/FM/WB Antenna P/N 76000862. Vehicles Fits ’09-’13 FLHR, FLHRC, FLHT, FLHX, FLHXSE, FLTR, FLTRX
with stock Tour-Pak require purchase of Tour-Pak Luggage and FLTRXSE and ’09 FLTRSE models. Requires separate
Conversion Kit P/N 53000291A. Chopped Tour-Pak luggage purchase of 2-Point or 4-Point Docking Hardware Kit. FLHX
requires separate purchase of Tour-Pak Spacer Kit P/N and FLTR models require separate purchase of Hidden AM/
53000461. Not for use with Three-Pocket Fairing Pouch P/N FM/WB Antenna Kit P/N 76000863. ’10-’12 FLHXSE, ’09
93300054B if used with Docking Kit P/N 52300131. Does not FLTRSE and ’12-’13 FLTRXSE models require separate
work with Boom! Audio Stage II Tour-Pak Speaker Kit P/N purchase of Hidden AM/FM/WB Antenna Kit P/N 76000863.
76000526A.
53276-09B Chrome.
53260-09B Chrome.
Fits ’09-’13 FLHR, FLHRC, FLHT, FLHX, FLHXSE, FLTR, FLTRX Fits ’97-’08 Road King®, FLHT, FLHX and FLTR models
and FLTRXSE, ’13 FLHRSE and ’09 FLTRSE models. Requires equipped with required docking hardware. FLTR and FLHX
separate purchase of 2-Point or 4-Point Docking Hardware models require Antenna Relocation Kit P/N 76326-00A. Does
Kit. FLHX and FLTR models require separate purchase of not fit with Layback License Plate Mounting Kit P/N 53385-00.
Tour-Pak Antenna Relocation Kit P/N 76556-09. ’13 FLHRSE, Some EU registration plates may interfere with Tour-Pak Rack.
’10-’12 FLHXSE, ’09 FLTRSE and ’12-’13 FLTRXSE models Models with rear fender tip trim can be adapted with the sepa-
require separate purchase of Hidden AM/FM/WB Antenna rate purchase of License Plate Relocation Kit P/N 60095-00A.
Kit P/N 76000863. 53276-04A Chrome.
TOURING
A. H-D DETACHABLES SOLO TOUR-PAK MOUNTING RACK B. H-D DETACHABLES TWO-UP TOUR-PAK MOUNTING RACK – GLOSS BLACK
*WARNING: Do not use this rack as a seat. Do not *WARNING: Do not use this rack as a seat. Do not
exceed the fender rack weight capacity. Using as seat exceed the fender rack weight capacity. Using as seat
or exceeding this capacity could cause handling prob- or exceeding this capacity could cause handling prob-
lems, which could result in loss of control and death or lems, which could result in loss of control and death or
serious injury. serious injury.
A. H-D DETACHABLES SOLO TOUR-PAK A. H-D DETACHABLES SOLO TOUR-PAK B. H-D DETACHABLES TWO-UP TOUR-PAK B. H-D DETACHABLES TWO-UP TOUR-PAK
MOUNTING RACK – ’14-LATER MODELS MOUNTING RACK – ’09-’13 MODELS MOUNTING RACK – ’09-’13 MODELS MOUNTING RACK – ’97-’08 MODELS
274 TOURING & TRIKE TOURING & TRIKE 275
Tour-Pak® Racks Tour-Pak® Racks
A. H-D DETACHABLES TOUR-PAK® LUGGAGE CARRIER C. AIR WING TOUR-PAK® LUGGAGE RACK*
CONVERSION KIT The low-profile aerodynamic styling of the Air Wing Tour-Pak®
This kit includes everything needed to convert the rigid-mount Luggage Rack enhances the look of any Razor-Pak, Chopped
Tour-Pak® luggage carrier to an easy on-and-off detach- or King Tour-Pak lid. Available in mirror chrome or rich gloss
able version, and includes a Turn Signal Relocation Kit using black finish, the rack draws your eye with its sleek lines and
the Signature LED Saddlebag Run/Brake/Turn lamps. This the engraved Harley-Davidson script adds a signature touch.
complete kit also includes a Docking Hardware Kit, H-D® This full-sized rack protects both Tour-Pak carrier's lid and
Detachables™ Two-Up Tour-Pak® luggage carrier Mounting passenger backrest from scratches. The die-cast wing and
Rack, and License Plate Relocation Kit. This kit is offered with lightweight steel tubing are hand-polished before finishing for
either Chrome or Black mounting hardware. long-lasting beauty. Kit includes all necessary mounting hard-
ware. For added visibility, the rack is designed to incorporate
Fits ’14-Later FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE, the internal wiring of the Air Wing Rack Light Kit (sold sepa-
FLTRU, and FLTRUSE models. Models equipped with CB rately) for a clean look.
require separate purchase of CB antenna relocation kit P/N
76000308. CVO models require purchase of lighting module Fits King, Chopped and Razor-Pak Tour-Pak carrier lids.
P/N 69200949. Does not fit models equipped with Boom! Mounting hole pattern matches Premium Tour-Pak Luggage
Audio Stage II Tour Pak luggage carrier speaker kits. Not Rack P/N 53665-87.
compatible with Air Wing or Stealth Detachable Luggage racks. 79179-08 Chrome.
53000916 Black. 53000063 Gloss Black.
53000917 Chrome.
D. AIR WING RACK LED LIGHT KIT
B. H-D DETACHABLES TOUR-PAK LUGGAGE Custom fit to the Air Wing Tour-Pak Rack, this fast-acting LED
CONVERSION KIT 1 – ’97-’13 Light Kit operates as a supplemental rear running light and
Transform your Electra Glide model for around-town cruising. brake light. The high, center-mount position places the rear
This kit includes everything needed to convert the rigid-mount A. H-D DETACHABLES TOUR-PAK® LUGGAGE CARRIER CONVERSION KIT C. AIR WING TOUR-PAK LUGGAGE RACK – CHROME light in the line-of-sight of following vehicles and the bright,
Tour-Pak to an easy on-and-off detachable version. Complete fast-acting LED lamps get you noticed. Wiring is concealed
kit includes two-up docking hardware kit, H-D Detachables inside the rack tubes for a clean, custom installation.
Two-Up Tour-Pak Rack, chrome license plate holder, reflector
and AM/FM antenna relocation hardware. Fits ’14-later Touring and Tri Glide® models equipped with Air
Wing Tour-Pak Luggage Rack P/N 79179-08 or 53000063.
53246-09C Also fits ’14-later FLHTKSE and ’15-later FLTRUSE models with
Fits ’09-’13 FLHTC, FLHTCU, FLHTK and FLTRU models. Original Equipment Tour-Pak Rack.
FLHTCU and FLHTK require separate purchase of Wiring
Harness P/N 70032-09. FLTRU models require separate 68000113 Smoked Lens.
purchase of Wiring Harness P/N 69200181. 68000112 Red Lens.
53303-07A Fits ’97-’13 Touring models equipped with Air Wing Tour-Pak
Fits ’97-’08 FLHTC models. ’97-’05 models require separate Luggage Rack P/N 79179-08 or 53000063. Also fits ’09-’13
purchase of Light Harness Kit P/N 70113-08. FLHTCUSE models with Original Equipment Touring Rack.
Also available: 68250-08A Red Lens.
TOUR-PAK QUICK-DISCONNECT HARNESS FOR
ULTRA MODELS
Wiring Harness Kit allows the installation of Detachable Tour-
Pak Rack Kit on specified models.
70032-09
Fits ’09-’13 FLHTCU and FLHTK models equipped with
Detachable Tour-Pak Rack Kit P/N 53246-09A.
69200181
Fits ’11-’13 FLTRU models equipped with Detachable
Tour-Pak Rack Kit P/N 53246-09A.
70113-08
Fits ’97-’05 FLHTC models equipped with Detachable
Tour-Pak Kit P/N 53303-07A.
TOURING
A. H-D DETACHABLES TOUR-PAK® LUGGAGE A. H-D DETACHABLES TOUR-PAK® LUGGAGE C. AIR WING TOUR-PAK LUGGAGE RACK – GLOSS BLACK
CARRIER CONVERSION KIT – CHROME CARRIER CONVERSION KIT – GLOSS BLACK
1
WARNING: Do not use this rack as a seat. Do not
exceed the fender rack weight capacity. Using as seat
or exceeding this capacity could cause handling prob-
lems, which could result in loss of control and death or
serious injury.
*WARNING: Do not use this rack as a seat. Do not
exceed the fender rack weight capacity. Using as seat
2
WARNING: Disconnecting your DOT-required brake or exceeding this capacity could cause handling prob-
lamp could reduce your visibility to others and result in lems, which could result in loss of control and death or
death or serious injury. serious injury.
B. H-D DETACHABLES TOUR-PAK CONVERSION B. H-D DETACHABLES TOUR-PAK CONVERSION D. AIR WING RACK LED LIGHT KIT – RED LENS
KIT – ’09-’13 MODELS KIT – ’97-’08 MODELS
276 TOURING & TRIKE TOURING & TRIKE 277
Tour-Pak® Racks Saddlebag Lid Rails
A. STEALTH TOUR-PAK® LUGGAGE RACK* E. TOURING SADDLEBAG LID RAILS
Style and practicality in one. This classic six-bar Tour-Pak® Protect your saddlebag lids from scratches and boot marks.
luggage rack flows with the long and lean lines of today’s Elegant welded rails are formed of high-quality tubing, and are
custom rides. The cantilevered aerodynamic rails appear to beautifully polished and chrome plated to a mirror-like finish.
float above the center spar, imparting a lighter-than-air profile. The rails are shaped to wrap down the front of the saddlebag
Hidden hardware adds to the clean design. The Stealth Rack lid, and are designed to accept model-specific medallions
mounts in the same position as the Original Equipment (sold separately) for a custom touch. The three-point mount
Ultra Limited rack or the accessory Premium and Air Wing simplifies installation, and the complete kit includes left and
Tour-Pak luggage racks, so no additional drilling is required right rails, and mounting hardware.
on those models. Use Bungee Cord Soft-Hook Extensions 90200876 Chrome.
P/N 52300140 to keep your luggage firmly in place. Fits ’14-later Touring models with Color-Matched Hard
Fits King, Chopped and Razor-Pak Tour-Pak® carrier lids. Does Saddlebags. Does not fit FLHXSE or models with saddlebag
not fit with Color-Matched Tour-Pak® Spoiler kits. lid speakers or Passenger Armrest Kit P/N 52400073.
90200737 Chrome.
53000242 Chrome.
Fits ’93-’13 Touring models with Color-Matched Hard
53000247 Gloss Black. Saddlebags. Does not fit models with leather covered bags or
models equipped with Saddlebag Wing Tips P/N 53826-00B
B. PREMIUM TOUR-PAK LUGGAGE RACK* or models equipped with Saddlebag Speaker Kit P/N
This full-sized rack is especially designed to complement Tour- 76000202.
Pak lids with armrest-style passenger backrests. Protects both
Tour-Pak carrier's lid and passenger backrest from scratches. F. AIR WING FENDER RAIL FOR TRIKE – CHROME
Lightweight steel tubing incorporates high-quality welded The low-profile aerodynamic shape of the Air Wing Fender
joints and is hand-polished and chrome-plated using copper Rail enhances the look and protects the surface of your
as a base coat followed by nickel and chrome to provide long- Trike’s rear fenders. The mirror chrome rails follow the sleek
lasting beauty. Comes complete with all necessary mounting A. STEALTH TOUR-PAK LUGGAGE RACK – A. STEALTH TOUR-PAK LUGGAGE RACK – E. TOURING SADDLEBAG LID RAILS – CHROME F. AIR WING FENDER RAIL FOR TRIKE –
CHROME GLOSS BLACK CHROME contours of the fenders, and the slim rails and die-cast rear
hardware. wings complement the available Air Wing Tour-Pak® Luggage
53665-87 Rack. Kit includes left and right rail and all necessary mount-
Fits King, Chopped and Razor-Pak Tour-Pak® carrier lids. ing hardware.
61400058
C. TOUR-PAK ACCENT RAIL – CHROME Fits ’09-later FLHTCUTG, FLHTCUTGSE and ’10-’11 FLHXXX
Fabricated from highly polished steel tubing, these premium models. Does not fit with Trike Fender Bra P/N 57892-11.
quality chrome-plated Accent Rails frame the wrap-around
Tour-Pak carrier's lights for a custom look. The rails provide an G. AIR WING SADDLEBAG LID RAIL KIT
added level of protection from pass-by contact. Kit includes all The low-profile aerodynamic styling of the Air Wing Saddlebag
necessary mounting hardware. Lid Rail enhances the look and protects the lid of your Color-
53000229 Matched Hard Saddlebags. Available in mirror chrome or gloss
Fits ’14-later FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRK, black finish, the rails cascade down the front of the saddlebag
FLTRU, FLHTCUTG, FLTRXSE and models equipped with to protect the paint from a misplaced boot heel, and the die-
accessory King Tour-Pak® and LED Wrap-Around Light. Does cast wing design at the rear complements the style of the Air
not fit CVO™ FLHTKSE or FLTRUSE models. Wing Luggage Rack. Kit includes all necessary mounting hard-
ware. For added visibility, add the available Air Wing Light Kit
D. SADDLEBAG GUARD RAILS (sold separately).
Bolt on style and protection. These Saddlebag Guard Rails
surround and protect the lower portion of the bag, and add a Fits ’14-later Touring models with Color-Matched Hard
traditional look to your Touring bike. The thick-walled chrome- Saddlebags. Does not fit FLHXSE or models with saddlebag
plated tubing and the elegant cast mounts clamp securely lid speakers or Passenger Armrest Kit P/N 52400073.
to the Original Equipment saddlebag guards for a seamless 90200792 Chrome.
look. Offered in Chrome or Gloss Black finish to match any 90200793 Gloss Black.
bike style.
Fits ’93-’13 Touring models with Color-Matched Hard
Fits ’14-later Touring models (except FLHRC, FLHRSE, FLHXSE, Saddlebags. Does not fit models with leather covered bags
and FLTRXSE). FLHT, FLHRXS, FLHX, FLHXS, FLHXST, FLTRX, or models equipped with Saddlebag Wing Tips P/N 53826-
FLTRXS and FLTRXST require separate purchase of Saddlebag 00B or models equipped with Saddlebag Speaker Kit P/N
TOURING
Guard and Support Kit P/N 90200787 or 90200788. Does not 76000202.
fit with stretched side covers or CVO style rear fender system. 88299-09 Chrome.
90201903 Chrome. B. PREMIUM TOUR-PAK LUGGAGE RACK C. TOUR-PAK ACCENT RAIL – CHROME G. AIR WING SADDLEBAG LID RAIL KIT – G. AIR WING SADDLEBAG LID RAIL KIT –
90201902 Gloss Black. CHROME GLOSS BLACK H. AIR WING RAIL LED LIGHT KIT*
Custom fit to the Air Wing Rails, this fast-acting LED Light Kit
Also available: operates as a supplemental rear running light and brake light.
TWIN RAIL CHROME SADDLEBAG GUARD KIT The high and outside mounting position places the lights in the
Kit comes with rear saddlebag guards, side rails, mounting line-of-sight of following vehicles, and the bright, fast-acting
hardware and instructions for easy installation. LED lamps get you noticed. Wiring is concealed inside the rack
tubes for a clean, custom installation.
90892-09
Fits ’09-’13 FLHR, FLHT, FLHTK, FLTR and FLTRU models. Fits ’14-later Touring models equipped with Air Wing
Stock on ’09-’13 FLHTC and FLHTCU models. FLTR and Saddlebag Rails P/N 90200792 or 90200793.
FLTRU models require separate purchase of Saddlebag
68000115 Red.
Supports P/N 49194-09A, 90781-09A, Nut P/N 7531 (Qty 2)
and Antenna Mounting Bracket P/N 76516-09. 68000114 Smoked.
91216-97 Fits ’93-’13 Touring models equipped with the Air Wing
Fits ’97-’08 FLHR, FLHT, ’06-’08 FLHTCUSE and ’98-’08 Saddlebag Lid Rails P/N 88299-09, 90200391 and ’09-’13
FLTR models. ’04-’08 FLTR models require the separate Trike models equipped with Air Wing Trike Fender Rails P/N
purchase of Saddlebag Supports P/N 49194-85 and 90781- 61400058.
93, Nut P/N 7686 (Qty 2) and Screw P/N 3601 (Qty 2).
68388-10 Red.
D. SADDLEBAG GUARD RAILS – CHROME D. SADDLEBAG GUARD RAILS – GLOSS BLACK H. AIR WING RAIL LED LIGHT KIT
278 TOURING & TRIKE TOURING & TRIKE 279
Saddlebag Guards Saddlebag Guards
A. SADDLEBAG SUPPORT KIT C. REAR SADDLEBAG GUARDS – GLOSS BLACK*
Complete the stripped-down look by eliminating the rear Add a sinister look to your ride. Designed to replace the
saddlebag guards. This kit replaces the Original Equipment Original Equipment chrome-plated guards featured on many
loop saddlebag guard and support with an inconspicuous Touring models, the blacked-out finish minimizes the look
bolt-on bar that supports the saddlebag for a clean, custom without a reduction in protection.
appearance. Kit includes left and right support and all neces- 90200791
sary mounting hardware. Fits ’14-later FLHR, FLHRC, FLHTCU, FLHTCUL, FLHTK,
90200981 FLHTKL, FLHTKSE, FLRTK, FLTRU and ’20-later FLTRK and
Fits ’14-later FLH, FLHR, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRKSE models. Installation requires reuse of Original
FLHTKSE, FLTRK, FLTRKSE and FLTRU models. Stock on ’14- Equipment saddlebag supports.
later FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXSE, 49283-09
FLHXST, FLTRK, FLTRUSE, FLTRX, FLTRXS and FLTRXST Fits ’09-’13 Touring models. FLHX, FLTR, FLTRU, FLTRX,
models. Stock on ’20-later FLTRXSE. FLTRXSE, ’13 FLHRSE, ’10-’12 FLHXSE and ’09 FLTRSE
90881-09A models require separate purchase of Saddlebag Supports
Fits ’09-’13 Touring models (except FLHRC and FLHTCUSE). P/N 49194-09A and 90781-09A, Nut P/N 7531 (Qty 2) and
Stock on ’09-’13 FLHX, FLHXSE, FLTR, FLTRU, FLTRX, A. SADDLEBAG SUPPORT KIT (’14-LATER MODELS) Antenna Mounting Bracket P/N 76516-09.
FLTRXSE, ’13 FLHRSE and ’09 FLTRSE models. Does not fit 46548-03
with Saddlebag Filler Strip Kits. Fits ’97-’08 Touring models. (’04-’08 FLTR, FLHX and
46565-04 FLHRS models require the separate purchase of Saddlebag
Fits ’97-’08 Touring (except FLHRC) models. Stock on FLHRS, Supports P/N 49194-85 and 90781-93 and two
FLHX and ’04-’08 FLTR models. P/N 3601 and 7686.)
B. REAR SADDLEBAG GUARD AND SUPPORT KIT* D. COMFORT PROFILE REAR SADDLEBAG GUARD KIT*
Add protection and style to your ride. Complete kit replaces the C. REAR SADDLEBAG GUARDS – GLOSS BLACK The unique profile of these chrome-plated Rear Saddlebag
under-saddlebag support found on some Touring models with (’14-LATER MODELS) Guards gives your passenger more leg room. A perfect
loop-style saddlebag guards for a traditional look. Featured as replacement for the Original Equipment saddlebag guards.
Original Equipment on many Touring models, these chrome- 49179-09
plated guards protect the leading edge of the saddlebag, and Fits ’09-’13 Touring models (except FLHTC, FLHTCU and
are shaped to accept Saddlebag Guard Bags (sold separately) FLHTCUSE). ’09-’13 FLHX, FLHXSE, FLTR, FLTRU, FLTRX and
for added storage. Kit includes saddlebag supports, left and FLTRXSE, ’13 FLHRSE and ’09 FLTRSE models require
right guards and all necessary mounting hardware. separate purchase of Saddlebag Supports P/N 49194-09A
90200787 Chrome. and 90781-09A, Nut P/N 7531 (Qty 2) and Antenna Mounting
Fits ’14-later FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXST, Bracket P/N 76516-09. FLHRC models require separate
FLHXSE, FLTRU, FLTRUSE, FLTRX, FLTRXS, FLTRXST and purchase of reflectors P/N 59370-98 and 59371-98.
FLTRXSE models. Stock on ’14-later FLH, FLHR, FLHRC, 49087-01
FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE, FLTRK and Fits ’97-’08 FLHR, FLTR, FLHX and FLHT models. FLHRCI
FLTRKSE models. models require separate purchase of Reflector
90200788 Gloss Black. P/N 59370-98 and 59371-98. ’04-’08 FLTR, FLHX and FLHRS
Fits ’14-later FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXST, models require separate purchase of Saddlebag Supports
FLHXSE, FLTRU, FLTRUSE, FLTRX, FLTRXS, FLTRXST and
A. SADDLEBAG SUPPORT KIT (’09-’13 MODELS) P/N 49194-85 and 90781-93 and two each of P/N 3601 and
FLTRXSE models. Stock on ’14-later FLH, FLHR, FLHRC, 7686. (Will not fit Saddlebag Guard Bags.)
FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE, FLTRK and
FLTRKSE models.
49282-09B Chrome.
Fits ’09-’13 FLHX, FLHXSE, FLTR, FLTRU, FLTRX, FLTRXSE,
’13 FLHRSE and ’09 FLTRSE models.
49291-07 Chrome.
Fits ’04-’08 FLHRS, FLHX, FLTR and ’05 FLHTCSE models.
TOURING
C. REAR SADDLEBAG GUARDS – GLOSS BLACK
(’09-’13 MODELS)
*WARNING: These guards may provide limited leg *WARNING: These guards may provide limited leg
and cosmetic vehicle protection under unique circum- and cosmetic vehicle protection under unique circum-
stances (fall over while stopped, very low speed slide). stances (fall over while stopped, very low speed slide).
They are not made nor intended to provide protection They are not made nor intended to provide protection
from bodily injury in a collision with another vehicle or from bodily injury in a collision with another vehicle or
any other object. any other object.
B. REAR SADDLEBAG GUARD AND B. REAR SADDLEBAG GUARD AND D. COMFORT PROFILE REAR SADDLEBAG GUARD KIT
SUPPORT KIT – GLOSS BLACK SUPPORT KIT – CHROME
’14-LATER MODELS ’09-’13 MODELS
280 TOURING & TRIKE TOURING & TRIKE 281
Luggage Accessories Luggage Accessories
A. PREMIUM TOUR-PAK® LUGGAGE FITTED LINING C. TOUR-PAK® LID FITTED LINING WITH ORGANIZER –
Line your Touring bike’s luggage to protect your belongings PREMIUM BLACK
and reduce noise and rattles on the road. Soft-touch felt-finish Equip the Tour-Pak® lid to protect and store your belongings.
liner is formed to the interior for a perfect fit. Molded base and This Premium Lid Lining features a soft-touch black felt finish
sides maximize the interior room, and one-piece design allows to reduce noise, and a convenient series of storage pouches
easy removal for cleaning and maintenance. that provide easy access to all your essentials. Four flap
53000323 King Tour-Pak® luggage. pouches and one mesh and one clear pocket provide plenty
Fits ’14-later Touring and Tri Glide® models equipped with of storage and a great way to keep keys, cell phones, glasses
King Tour-Pak luggage. and papers handy. Hook-and-loop fasteners secure the one-
piece formed lining to the lid, and allow easy removal for clean-
53301-06 King Ultra Tour-Pak luggage.
ing and maintenance.
Fits ’93-’13 Touring (except FLHTK and ’10-later CVO™
models) and Trike models equipped with King Tour-Pak 53000392
luggage with incandescent wrap-around Tail Lamp Kit. Does Fits ’14-later Touring and Tri Glide® models equipped with
not fit with Tour-Pak bottom tub mounted accessories. King or Chopped Tour-Pak luggage.
53302-07 King Classic Tour-Pak luggage.
Fits ’93-’13 Touring and Trike models equipped with King C. TOUR-PAK LID FITTED LINING WITH ORGANIZER – PREMIUM BLACK D. TOUR-PAK LID FITTED LINING WITH
Tour-Pak luggage without incandescent wrap-around Tail ORGANIZER – GRAY
Lamp Kit. Does not fit with Tour-Pak bottom tub mounted Add practical storage to your Tour-Pak luggage. This Lid Lining
accessories. features a convenient six pocket organizer to keep smaller
items conveniently at hand, and is shaped to fit the contours
53000322 Chopped Tour-Pak luggage. of the Tour-Pak lid for a finished look. The organizer features
Fits ’14-later Touring and Tri Glide models equipped with four enclosed pouches, one mesh pouch and one clear mobile-
Chopped Tour-Pak luggage. Does not fit with Tour-Pak device pouch. The soft gray finish is the perfect match for the
bottom tub mounted accessories. Does not fit Tri-Glide Original Equipment Tour-Pak bottom liner, and the hook-and-
models or models with Original Equipment King T-Paks. A. PREMIUM TOUR-PAK LUGGAGE FITTED A. PREMIUM TOUR-PAK LUGGAGE FITTED
loop fasteners permit easy removal for cleaning.
LINING – KING ULTRA ’93-’13 MODELS LINING – KING ULTRA ’93-’13 MODELS
B. PREMIUM FITTED SADDLEBAG LINING 53000302
Protect your belongings and reduce noise and rattles on the Fits ’14-later Touring and Tri Glide models equipped with King
road. Premium soft-touch felt-finish liner is formed to the hard or Chopped Tour-Pak luggage.
saddlebag interior for a perfect fit. Molded base and sides
maximize the interior room, and one-piece design allows easy E. TOUR-PAK LID ORGANIZER
removal for cleaning and maintenance. A true innovation in storage convenience and efficiency, this
ingenious lid organizer helps keep smaller items conveniently
90200918 located under your Tour-Pak lid for easy access. The organizer
Fits ’14-later Touring models equipped with Color-Matched features five different-sized nylon-meshed pockets, as well as
Hard Saddlebags (except FLHTKSE, FLHXSE, FLTRKSE and two flaps for additional storage. A great way to keep keys, cell
FLTRXSE). phones, glasses and papers handy.
92189-06
53249-01B
Fits ’93-’13 Touring models equipped with Original
Fits ’93-’13 Touring and Trike models equipped with a King,
Equipment Color-Matched Hard Saddlebags. Does not fit
Ultra, Chopped or Razor-Pak Tour-Pak. Does not fit ’08-later
Police model saddlebags. D. TOUR-PAK LID ORGANIZER/LINER – GRAY CVO™ Ultra models with Power Locks, or models equipped
with Tour-Pak Spoiler Kit P/N 53149-series, Tour-Pak Light
P/N 54302-98A, Mini Tour-Pak Lid Rack P/N 53100-96 or
Contoured Tour-Pak Luggage Rack P/N 79148-06A.
TOURING
luggage for maximum organization.
93300001
A. PREMIUM TOUR-PAK LUGGAGE FITTED A. PREMIUM TOUR-PAK LUGGAGE FITTED Fits ’09-later FLHTCUTG and ’10-’11 FLHXXX models.
LINING – KING ’14-LATER MODELS LINING – CHOPPED ’14-LATER MODELS
B. PREMIUM FITTED SADDLEBAG LINING – B. PREMIUM FITTED SADDLEBAG LINING – F. TRUNK DOOR ORGANIZER
’14-LATER MODELS ’93-’13 MODELS
282 TOURING & TRIKE TOURING & TRIKE 283
Luggage Accessories Luggage Accessories
A. TOUR-PAK® WALL ORGANIZER D. PREMIUM TRAVEL-PAKS
Convenient storage system wraps the interior walls of your This collection of fitted luggage provides convenient storage
King Tour-Pak® luggage for easy access to keys, cell phones, for your next long ride. The bags are manufactured of water
maps and gloves. The organizer features a variety of mesh and resistant ballistic nylon that matches the premium luggage
enclosed pockets, sized perfectly to keep small items close at collection. The exterior features comfortable carrying handles,
hand. Easily installed with included hook-and-loop tabs. heavy-duty glove-friendly zippers, a zippered pocket, D-rings
53000303 for optional carrying straps. The padded interior features a
Fits ’14-later Touring and Tri Glide® models (except CVO™ variety of convenient storage pockets and plenty of open stor-
models) equipped with King Tour-Pak Luggage. age. Saddlebag right-hand bag features an internal padded
laptop pocket and plenty of smart storage spaces.
54014-05
Fits ’93-’13 Touring and Trike models equipped with Ultra or 93300072 King Tour-Pak® luggage.
King Tour-Pak luggage. Does not fit with Chopped or Razor- Fits ’93-later Touring and Trike models equipped with King
Pak Tour-Pak. Tour-Pak luggage.
93300070 Hard Saddlebags.
B. SADDLEBAG WALL ORGANIZER Fits ’93-later Touring models equipped with Hard Saddlebags.
Convenient storage system equips the interior wall of your A. TOUR-PAK WALL ORGANIZER – ’14-LATER MODELS D. PREMIUM TRAVEL-PAK – KING TOUR-PAK Sold in pairs.
Color-Matched Saddlebags for easy access to keys, cell
phones, maps and gloves. The organizer features a combi- E. TRAVEL-PAKS
nation of mesh and enclosed pouches and pockets that are Simplify packing and unpacking your motorcycle. These well-
sized for safe, rattle-free packing. The organizer features a constructed, water-resistant bags are designed to fit perfectly
rigid backing that easily attaches to the wall of the saddlebag into Touring model luggage systems. The soft sides conform
with the Original Equipment quick-release saddlebag fasten- to the interior of the luggage to help use every available inch
ers. Kit includes left- and right-hand organizer. of space. Styled with a Bar & Shield logo, they feature heavy-
90200882 duty zippers and convenient carrying handles.
Fits ’14-later Touring models equipped with Color-Matched 53605-97 King Tour-Pak luggage.
Hard Saddlebags. Does not fit with Saddlebag Speaker Kits. Fits ’93-later Touring and Trike models equipped with King
Audio Saddlebag Speaker Kit P/N 76000489. and Ultra Tour-Pak luggage.
88232-06 91885-97A Hard Saddlebags.
Fits ’93-’13 Touring models equipped with Hard Saddlebags. Fits ’93-later Touring models equipped with Color-Matched
Hard Saddlebags and ’09-’17 VRSCF models equipped with
C. TRIKE SADDLEBAGS Rigid Saddlebags P/N 91172-09. Sold in pairs.
Add storage at your fingertips. These vinyl-wrapped rigid side 91887-98 Leather Saddlebags.
bags are a perfect match to either the Original Equipment or Fits ’98-later FLHRC and FLHRS models. Sold in pairs.
accessory seats and are contoured to fit comfortably under
the passenger’s legs. Featuring an easy-to-grip chrome-plated F. SADDLEBAG COOLER
finger pull with Bar & Shield Logo, the forward-opening bags Keep beverages and snacks cold right in your saddlebag on
snap shut with a strong magnetic closure. The interior can those hot summer rides. This zippered bag is fully lined and
accommodate 2 soda cans or water bottles side by side and insulated, and fits the full length of your saddlebag.
is the ideal spot for sunscreen, glasses and your cell phone.
A. TOUR-PAK WALL ORGANIZER – ’93-’13 MODELS D. PREMIUM TRAVEL-PAK – E. TRAVEL-PAK – 90200991
Luggage capacity: 700 cubic inches total.
HARD SADDLEBAGS KING TOUR-PAK Fits ’93-later Touring models equipped with Color-Matched
84031-11 Hard Saddlebags.
Fits ’09-later FLHTCUTG and ’10-’11 FLHXXX models.
TOURING
B. SADDLEBAG WALL ORGANIZER – (’14-LATER MODELS SHOWN) E. TRAVEL-PAK – E. TRAVEL-PAK –
HARD SADDLEBAGS LEATHER SADDLEBAGS
TOURING
E. TANK BRA F. TRIKE REAR FENDER BRA
B. SADDLEBAG GUARD BAG WITH WATER BOTTLE HOLDER – BAR & SHIELD LOGO
C. SADDLEBAG GUARD BAG – BAR & SHIELD LOGO G. TRIKE SCUFF GUARDS — BODY & FENDER G. TRIKE SCUFF GUARDS — BODY
286 TOURING & TRIKE TOURING & TRIKE 287
Foot Controls Foot Controls
A. EXTENDED REACH RIDER FOOTBOARD PANS F. FOLDING HEEL SHIFTER
This kit extends the rider footboard forward of the stock loca- Give your left foot a little extra room. The Folding Heel Shifter
tion by 1", providing the tall rider a comfortable riding posi- permits the rider to move the rear shift peg out of the way
tion. When paired with Extended Reach Brake and Shift Levers, when on the open road, while retaining heel/toe shift function-
these pans allow riders with large boot sizes ample room to ality around town. Positive detent holds the peg in the selected
reposition their feet during a long ride. Available in traditional position, and can be adjusted while riding. Easy to install, the
D-shape or Swept Wing design, Extended Reach footboard replacement rear lever is chrome-plated, and shaped to
pans accept Original Equipment or accessory rider footboard match the Original Equipment toe shift lever. Lever accepts
inserts. The kit includes left and right footboard pans. stock or accessory shifter peg.
Fits ’02-later Touring (except FLHTCUL and FLHTKL) and 33876-07
Before Fits ’86-’17 FL Softail®, ’88-’16 Touring and ’08-’16 Trike
Trike models. Also fits ’97-’01 Touring models equipped with
Extended Reach Billet Style Brake Lever P/N 42638-03. models.
50409-04 Traditional Shape. After
G. HEEL/TOE SHIFTER SHAFT COVER
54145-10 Swept Wing. Conceal the splined end of the shifter shaft when you remove
A. EXTENDED REACH RIDER FOOTBOARD PANS – TRADITIONAL SHAPE SHOWN F. FOLDING HEEL SHIFTER – G. HEEL/TOE SHIFTER SHAFT COVER the heel shift lever. The easy-to-install chrome-plated alumi-
B. BLACK RIDER FOOTBOARD PANS num billet cap is held in place with a flush Allen® screw for a
RETRACTED POSITION
Complete the blacked-out transformation. Replace the clean look.
Original Equipment chrome footboard pans with sinister 35471-05
gloss black. Kit includes both the right and left pan, and is Fits ’82-’17 FL Softail, and ’82-later Touring and Trike models
installed using the Original Equipment hardware and insert equipped with heel/toe shift levers. Installation requires
pad. Custom footboard inserts are sold separately. removal of heel shift lever.
Fits ’12-’16 FLD and ’86-’17 FL Softail® (except FLS, FLSS,
FLSTFB and FLSTFBS), ’86-later Touring (except FLHTCUL, H. SHIFTER SHAFT LEVER – GLOSS BLACK
FLHTCUL TC and FLHTKL) and Trike models. The perfect companion to black or edge-cut heel and toe shift
levers and shift linkages, this Gloss Black Shifter Shaft Lever
51322-08 Traditional Shape.
creates an uninterrupted blacked-out look from the front of
51060-08 Swept Wing Shape. the engine to the rear. Manufactured from Original Equipment
components, this lever is an exact replacement for the factory-
C. JIFFY STAND EXTENSION installed chrome-plated part.
Jiffy Stand Extension Kits have been ergonomically designed
33900186
to simplify the deployment and retraction of the jiffy stand.
Fits ’93-’16 Touring and Trike models.
The extension is shaped to simplify locating the tab with your
boot, and aid in swinging the jiffy stand into position. The
I. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS
move feels natural, and adds confidence when parking your
BLACK
motorcycle in a tight spot. Kit mounts to Original Equipment
Add the finishing touch to your blacked-out ride. This Gloss
jiffy stand, and includes all required mounting hardware.
Black Shift Linkage is easy to install and includes a transmis-
Fits ’91-later Touring models. Does not fit models equipped sion lever cover and decorative acorn nuts and bolts for a
with Defiance footboards, Burst footboards, or Rider Running complete custom look.
Boards P/N 50500158. B. BLACK RIDER FOOTBOARD PANS – B. BLACK RIDER FOOTBOARD PANS – H. SHIFTER SHAFT LEVER – GLOSS BLACK I. CUSTOM GEAR SHIFT LINKAGE – ROUND
33600259
TRADITIONAL SHAPE SWEPT WING SHAPE GLOSS BLACK
50000263 Gloss Black. Fits ’86-later Softail (except ’18-later FXBB, FXBBS, FXLR,
50000023 Chrome. FXLRS, FXLRST and ’20-later FXST), Touring and Trike
models. (Does not fit ’97-’99 FLSTS or models equipped with
D. JIFFY STAND AND MOUNT KIT – GLOSS BLACK Softail Extended Reach Forward Controls.)
With this beautiful gloss black jiffy stand kit, your Dark Custom 1
Touring model won’t just stand on its own – it will stand out. J. CUSTOM GEAR SHIFT LINKAGES
Using the Original Equipment jiffy stand and mount to ensure Kick your custom into gear with this collection of high-qual-
quality and fitment, these pieces are finished in rich gloss ity Custom Shift Linkages. Available in a variety of designs
black to blend into the frame and help disguise this very 2 to match your bike’s style, these aluminum linkages feature
visual component on the vehicle. Installation reuses Original aircraft-quality rod ends for easy adjustment and smooth
Equipment spring and hardware. operation. The easy-to-install linkage kit also includes a trans-
mission lever cover for ’86-’17 Softail and ’86-’16 Touring
50000122
TOURING
3 and Trike models, and decorative acorn nuts and bolts for a
Fits ’09-’16 Touring models (except FLHTCUL and FLHTKL). complete custom look.
E. RIDER FOOTBOARD HEEL GUARD Fits ’86-later Softail (except ’18-later FXBB, FXBBS, FXLR,
Avoid damaged boots and hours of cleaning melted rubber 4 FXLRS and FXLRST and ’20-later FXST), Touring and Trike
scuff marks from your exhaust shield. This Heel Guard mounts models. (Does not fit ’97-’99 FLSTS or models equipped with
to the right-side rider footboard and protects your boot from Softail Extended Reach Forward Controls.)
contact with the hot exhaust shield. The subtle curved shape 5 1. 34018-08 Slotted – Black Anodized.
keeps the boot heel away without restricting fore-and-aft
2. 34850-09 Skull.
movement of the rider’s foot. Kit includes chrome guard with
cutaway Bar & Shield logo and all mounting hardware. 3. 33801-09 Harley-Davidson Script.
50500225
C. JIFFY STAND EXTENSION – CHROME C. JIFFY STAND EXTENSION – GLOSS BLACK J. CUSTOM GEAR SHIFT LINKAGES 4. 33760-09 Slotted with Bar & Shield Logo.
Fits ’12-’16 FLD, ’86-’17 FL Softail, ’86-later Touring and ’09- 5. 33814-98A Round.
later Trike models equipped with Traditional and Swept Wing
footboards. Does not fit models equipped with Half-Moon, K. GEAR SHIFT LINKAGE COVERS
Tapered, Airflow, Defiance, Dominion™ or Burst footboards, A simple and inexpensive way to detail your Touring bike.
Extended Reach Rider Footboards P/N 50409-04 or 54145- These easy-to-install chrome-plated covers conceal the stock
10, Rider Running Boards P/N 50500158 or Screamin’ Eagle® gear shifter linkage for a brilliant finish. Kit includes all neces-
Fat Exhaust Shields. sary mounting hardware.
Fits ’99-’16 Touring and Trike models with stock gear shift
1 linkage.
1. 46303-01 Harley-Davidson Script.
2. 46305-01 Engraved Harley-Davidson.
D. JIFFY STAND AND MOUNT KIT – E. RIDER FOOTBOARD HEEL GUARD K. GEAR SHIFT LINKAGE COVERS
GLOSS BLACK
288 TOURING & TRIKE TOURING & TRIKE 289
Foot Controls Foot Controls
A. BOARD-TO-PEG CONVERSION KIT D. ENDGAME COLLECTION SHIFT LEVER
Add an aggressive look to your Touring motorcycle. These Styled to complement the Endgame Collection controls, this
support kits are designed to allow installation of mini foot- Shift Lever features a slotted design that will give your bike a
boards and footpegs. Kit Includes left and right mounting high-tech, industrial look.
brackets and all necessary installation hardware. Mini foot-
boards and footpegs sold separately. Fits ’86-later FL Softail®, ’88-later Touring and ’08-later Trike
models.
Fits ’09-later Touring models (except ’18-later FLTRXSE). 33600301 Black.
Requires separate purchase of ’18-later Original Equipment or
33600292 Graphite.
accessory Softail Standard rider footpegs.
50501642 E. BILLET STYLE HEEL/TOE SHIFT LEVER –
EXTENDED REACH
B. ENDGAME COLLECTION BRAKE LEVER Stretch out in style. Both the heel and toe sections of this Shift
Styled to complement the Endgame Collection controls, this Lever are 1.0" longer than traditional levers, separating the
Rear Brake Lever features a slotted design that will give your distance between the heel/toe shift by 2.0" total. This added
bike an industrial look. space provides a comfortable riding position for a tall rider,
A. BOARD-TO-PEG CONVERSION KIT A. BOARD-TO-PEG CONVERSION KIT D. ENDGAME COLLECTION SHIFT LEVER – D. ENDGAME COLLECTION SHIFT LEVER – and allows a rider with a large boot extra room to move. Styled
Fits ’14-later Touring and Trike models. BLACK GRAPHITE to complement our billet style mirror stems, these Billet Style
41600305 Black. $184.95 Shift Levers are forged, machined and polished for a beauti-
41600304 Graphite. $184.95 ful, custom look. When combined with the available Extended
Reach Brake Lever, long-limbed riders can straighten their
C. BILLET STYLE REAR BRAKE LEVER legs and ride in comfort. Kit includes a front and rear lever and
Styled to complement our billet style mirror stems and shift mounting hardware.
levers, these Billet Style Rear Brake Levers are forged from 33600001 Chrome.
billet aluminum, then machined and polished for a beau- Fits ’86-’17 FL Softail®, ’88-later Touring and ’08-later Trike
tiful, custom look. Available in your choice of finishes. Lever models.
matches the length of the Original Equipment brake lever.
Brake pedal pads sold separately. F. BILLET STYLE HEEL/TOE SHIFT LEVER –
Fits ’14-later Touring and Trike models. STANDARD LENGTH
Styled to complement our billet style mirror stems, these Billet
41600082 Chrome. Style Shift Levers are forged from 7075-T6 aluminum, then
41600079 Edge Cut. machined and polished for a beautiful, custom look. Available
41600208 Satin Black. in your choice of mirror chrome, satin black powder coat or
edge cut black anodized and machined aluminum finishes. Kit
Fits ’08-’13 Touring and Trike models. includes a front and rear lever and chrome hardware.
42638-08A Chrome.
Fits ’86-’17 FL Softail, ’88-later Touring and ’08-later Trike
D. AIRFLOW COLLECTION REAR BRAKE LEVER models.
Forged from billet aluminum, this brake lever makes its own 34535-00B Chrome.
custom statement. Featuring a deep groove that runs the B. ENDGAME COLLECTION BRAKE LEVER – B. ENDGAME COLLECTION BRAKE LEVER – E. BILLET STYLE HEEL/TOE SHIFT LEVER – F. BILLET STYLE HEEL/TOE SHIFT LEVER – 34045-10 Edge Cut.
length of the arm, the swept shape of the lever adds a strong BLACK GRAPHITE EXTENDED REACH STANDARD LENGTH, CHROME 34023-08 Satin Black.
visual element to the bike’s profile. Designed to match the
Airflow collection, this lever complements your contemporary
G. AIRFLOW COLLECTION HEEL/TOE SHIFT LEVER
or classic styling direction. Airflow lever matches the Original
Styled to complement the Airflow Collection, this forged billet
Equipment length to maintain the factory riding position.
aluminum shift lever adds a custom touch to your bike. The
Brake pedal pads sold separately.
lever features a deep groove that catches light and draws your
41600280 Gloss Black. eye. The separate front and rear levers can be easily adjusted
Fits ’14-later Touring and Trike models. for convenient shifting, and the extended-length rear lever
provides additional space for larger boots. Kit includes a front
and rear lever and mounting hardware. Lever accepts stock or
accessory shifter pegs.
33600076 Chrome.
TOURING
Fits ’86-’17 FL Softail, ’88-later Touring and ’08-later Trike
models.
H. HEEL SHIFTER
Add the convenience of a heel shifter to your footboard-
equipped Touring model. This traditional motorcycle Heel
Shifter Lever permits you to upshift with a downward tap
of your boot heel – eliminating the need to wedge your toe
under the forward lever and reducing wear on the top of your
boot. Kit includes the chrome plated heel shift lever, extended
shifter shaft, shifter peg and mounting hardware.
C. BILLET STYLE REAR BRAKE LEVER – C. BILLET STYLE REAR BRAKE LEVER – F. BILLET STYLE HEEL/TOE SHIFT LEVER – F. BILLET STYLE HEEL/TOE SHIFT LEVER –
CHROME EDGE CUT STANDARD LENGTH, EDGE CUT STANDARD LENGTH, SATIN BLACK Fits ’01-later Touring and Trike models. Stock on ’84-’19
Touring and Trike. Stock on ’20-later CVO™ models only..
33600345 Gloss Black.
33600325 Chrome.
C. BILLET STYLE REAR BRAKE LEVER – D. AIRFLOW COLLECTION REAR BRAKE LEVER G. AIRFLOW COLLECTION HEEL/TOE H. HEEL SHIFTER
SATIN BLACK SHIFT LEVER
290 TOURING & TRIKE TOURING & TRIKE 291
Foot Controls Foot Controls
A. PASSENGER MINI FOOTBOARD MOUNT KIT F. ADJUSTABLE AUXILIARY PASSENGER
This mount kit permits replacement of the Original Equipment FOOTPEG MOUNTS
passenger footboards with footpegs or mini footboards, and These 3-position adjustable passenger footpeg mounts will
moves the passenger’s foot rearward and inward to give the keep your companion happy over the long haul. Push-button
rider more space between the rider footboard and the passen- adjustment lets the passenger reposition their feet to keep
ger foot support. The new position clears the path for your feet blood flowing in all the lower extremities. When combined with
to ease walking the bike in and out of parking spaces. When the standard footboard, both short- and long-limbed passen-
folded, the pegs are tighter to the bike to reduce the chance of gers should be able to find a comfortable riding position. Pegs
contacting the passenger foot support with your calf. Original can also be pivoted fully rearward to allow the rider the room
equipment on FLHTCUL and FLHTKL model. Kit includes left to get his or her feet on the ground when walking the bike in
and right mount, and required installation hardware. Male- and out of parking spaces. Kit includes beautifully chromed
mount style passenger footpegs or mini-footboards sold left- and right-side adjustable mounts and all installation hard-
separately. ware. Complete the custom look with your choice of footpegs
50500403A (sold separately).
Fits ’93-later Touring models. Does not fit Trike models. 54157-10
Fits ’10-later Touring models with Original Equipment
A. PASSENGER MINI FOOTBOARD MOUNT KIT F. ADJUSTABLE AUXILIARY PASSENGER FOOTPEG MOUNTS –
B. PASSENGER FOOTPEG MOUNT – GLOSS BLACK passenger footboards (except CVO™ models or models
FORWARD & MID POSITION
Manufactured from Original Equipment components for equipped with Adjustable Passenger Footboard Mount Kit
proper fit and proven strength, these footpeg supports P/N 50768-07A). Also fits ’93-later Touring models equipped
replace the factory chrome-finished mounts for a clean, with Passenger Footboard Kit P/N 50378-07B, 50379-07B or
custom look. When installed with blacked-out accessory foot- 53070-00A. Does not fit Trike models or models equipped
pegs, these gloss black footpeg supports tie the pegs to the with sidecars. Will not fit with Footpeg P/N 49117-77TB,
bike for a seamless, no-contrast look. Kit includes right and 49110-98, 91821-85, 50643-82, 50647-82, 49500-92T,
left hand mount. 49234-98, 50978-99, 50976-99, 50911-08, 50113-10, 50695-
50500578 08, 49128-82, 50056-10, 50039-10, 49312-10, 50451-09 and
Fits ’93-later Touring models. Does not fit Trike models. 50178-09.
C. PASSENGER FOOTPEG MOUNT KIT – CHROME G. ADJUSTABLE PASSENGER FOOTBOARD MOUNT KIT
Designed specifically for the sport-touring rider, this chrome- Maximize your passenger’s riding comfort. These chrome
plated kit allows passenger footboards to be removed and 5-position adjustable mounts raise and lower the passenger
replaced with a variety of male mount-style Harley-Davidson® footboard. The lowest position is 2.0" forward from stock, and
footpegs. The kit has 3 adjustable height positions and the highest position is 2.5" higher than stock. Easy to adjust
includes all hardware. with a common hex wrench. Kit includes left and right adjust-
able support assembly and all required mounting hardware.
50198-97C Footboard pans and inserts sold separately.
Fits ’93-later Touring models. Does not fit Trike models.
50768-07A
D. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT Fits ’93-later Touring models. Does not fit Trike models.
Maximize your passenger’s riding comfort. Proper foot posi-
tion reduces the cramped or stretched-out feeling, and H. REACH PASSENGER FOOTBOARD MOUNT KIT
relieves pressure on the knees and the tailbone. These adjust- B. PASSENGER FOOTPEG MOUNT – GLOSS BLACK F. ADJUSTABLE AUXILIARY PASSENGER FOOTPEG MOUNTS – Kit raises the height of your passenger footboards by approx-
able mounts raise and lower the passenger footpeg to accom- REAR POSITION imately 2.25" for increased passenger comfort. Especially
modate taller and shorter passengers. Easy to adjust with desirable on ’97-later Touring models due to the frame and
common tools, the mount adjusts through a 360° range saddlebag guard change. Includes mounting hardware.
(depending on model), allowing both fore and aft and up and 50789-99B
down height adjustment. Kit includes left and right adjust- Fits ’93-later Touring models. Does not fit Trike models. Does
able support assembly and all required mounting hardware. not fit with saddlebag guard bags.
Footpegs sold separately.
50763-09
Fits models with H-D® male mount-style passenger
footpeg supports (except Softail® models). Does not fit with
Heel Raiser Footpeg Kit P/N 50178-09. Does not fit the
rider position.
TOURING
E. PASSENGER FOOTBOARD SUPPORTS
Add the comfort and convenience of passenger footboards to
your Touring motorcycle. These supports are designed to allow
installation of traditional D-shaped, Swept Wing, Tapered or
Old-Style Passenger Footboards (sold separately) on Touring
models. Kit includes left and right supports and installation
hardware. Add your choice of passenger footboard pan design
and footboard insert to complete your custom look.
Fits ’93-later Touring and Trike models.
C. PASSENGER FOOTPEG MOUNT KIT – D. ADJUSTABLE PASSENGER G. ADJUSTABLE PASSENGER FOOTBOARD MOUNT KIT
50500042 Black.
CHROME FOOTPEG MOUNT KIT
53070-00A Chrome.
After
Before
E. PASSENGER FOOTBOARD SUPPORTS – E. PASSENGER FOOTBOARD SUPPORTS – H. REACH PASSENGER FOOTBOARD MOUNT KIT
BLACK CHROME
292 TOURING & TRIKE TOURING & TRIKE 293
Foot Controls Foot Controls
A. PASSENGER FOOTBOARD AND MOUNT KIT G. HALF-MOON PASSENGER FOOTBOARD
Convenient bolt-on installation. Includes specially designed PANS AND INSERTS
mounting stud/brackets for proper installation. Footboards Styled to match the Half-Moon Rider Footboards, these clas-
fold up when not in use. Kit includes Original Equipment-style sic passenger footboards add both style and comfort to your
aluminum footboards, rubber pads, mounting hardware and nostalgic ride. Available in mirror-finish chrome or gloss black
passenger footboard supports. finish, the kit includes left and right footboard pan and vibra-
50379-07B tion-isolation footboard inserts. Model-specific footboard
Fits ’93-later Touring and Trike models. mounts are sold separately.
Fits ’06-’17 Dyna®, ’00-later Softail® (except FXDRS, FXFB and
B. STREAMLINER PASSENGER FOOTBOARD AND FXFBS) and ’86-later Touring models equipped with passen-
MOUNT KIT ger footboard supports. Does not fit Trike models.
Styled to match the rider footboards on the Road King®
Custom, Road Glide® Custom and Street Glide® models, these 50807-08 Chrome.
Swept Wing Passenger Footboards feature a Streamliner-style 50810-08 Gloss Black.
rubber pad surrounded by a chrome accent. The smooth
Swept Wing footboard pan is chrome-plated throughout to H. ROAD KING® CLASSIC PASSENGER
A. PASSENGER FOOTBOARD AND MOUNT KIT B. STREAMLINER PASSENGER FOOTBOARD G. HALF-MOON PASSENGER G. HALF-MOON PASSENGER
add a custom touch, even in the folded position. Designed FOOTBOARD COVERS
AND MOUNT KIT FOOTBOARD PANS – CHROME FOOTBOARD PANS – GLOSS BLACK
for convenient bolt-on installation, the complete kit includes The latest in the family of Road King® Classic-inspired acces-
chrome-plated aluminum footboards, rubber pads, mounting sories, this chrome-plated steel footboard cover features
hardware and passenger footboard supports. a chrome die-cast Road King Classic medallion with black
50378-07B accents and a stylish leather accent piece. Mounting hard-
Fits ’93-later Touring models. Does not fit Trike models. ware included.
50246-00
C. PASSENGER FOOTBOARD PANS – CHROME Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
Replace the factory black painted passenger footboard with Trike models equipped with traditional D-shaped aluminum
the custom look of smooth chrome. These chrome-plated passenger footboards.
Footboard Pans are ready to install using your Original
Equipment hardware and the kit includes left- and right-side I. V-LOGO PASSENGER FOOTBOARD COVERS
Footboard Pans. Just add your choice of Footboard Insert for V-Logos are die-cast aluminum integrated with the cover, then
the finishing touch. Footboard Supports sold separately. chrome-plated for a desirable shine. Includes all mounting
hardware.
Fits ’06-’17 Dyna®, ’18-later Softail® (except FXDRS, FXFB and
50194-96
FXFBS) and ’86-later Touring models equipped with passen-
Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
ger footboard supports. Does not fit Trike models.
Trike models equipped with traditional D-shaped aluminum
50501144 Classic Style. passenger footboards.
50501147 Contemporary Style.
J. CONCHO PASSENGER FOOTBOARD COVERS
D. PASSENGER FOOTBOARD PANS – BLACK Heritage Softail® Classic model-inspired conchos make these
Complete the blacked-out transformation. Replace your covers look great whether footboards are up or down.
chrome Passenger Footboard Pans with sinister black. Kit C. PASSENGER FOOTBOARD PANS – CHROME, C. PASSENGER FOOTBOARD PANS – CHROME, H. ROAD KING CLASSIC PASSENGER FOOTBOARD COVERS 50193-96
includes left- and right-side Footboard Pans and is installed CLASSIC STYLE CONTEMPORARY STYLE Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
using the Original Equipment hardware. Custom Footboard Trike models equipped with traditional D-shaped aluminum
Inserts and Footboard Supports sold separately. passenger footboards.
Fits ’06-’17 Dyna, ’18-later Softail (except FXDRS, FXFB and
FXFBS) and ’86- later Touring models equipped with passen- K. HARLEY-DAVIDSON® SCRIPT PASSENGER
ger footboard supports. Does not fit Trike models. FOOTBOARD COVERS
These easy-to-install chrome covers are formed to fit over the
50501610 Classic Style. stock footboard pan to add a touch of style to the profile of
50501611 Contemporary Style. your bike. The simple, clean design features a deep embossed
Harley-Davidson script for a finishing touch. Kit includes
E. TRADITIONAL STYLE PASSENGER FOOTBOARD chrome mounting hardware.
PANS – CHROME 50782-91
TOURING
Replace the factory black painted passenger footboard with Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
the custom look of smooth chrome. The kit includes left- and Trike models equipped with traditional D-shaped aluminum
right-hand traditional D-shaped footboard pans, chrome- passenger footboards.
plated, and ready to install with your Original Equipment
hardware. Footboard inserts and footboard supports sold
separately.
50752-04
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
FXFBS) and ’86-later Touring and Trike models equipped
with passenger footboard supports.
D. PASSENGER FOOTBOARD PANS – D. PASSENGER FOOTBOARD PANS – I. V-LOGO PASSENGER J. CONCHO PASSENGER
F. SWEPT WING PASSENGER FOOTBOARD PANS GLOSS BLACK, CLASSIC STYLE GLOSS BLACK, CONTEMPORARY STYLE FOOTBOARD COVERS FOOTBOARD COVERS
These unique Swept Wing Passenger Footboard pans comple-
ment the Swept Wing Rider Footboard shape, and allow you
to replace the Original Equipment passenger footpegs on
certain models with footboards. When folded, the footboard
displays a mirror chrome surface in your choice of smooth or
ball-milled, grooved design. Footboard inserts and footboard
supports sold separately.
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB
and FXFBS) and ’86-later Touring models equipped with
passenger footboard supports. Does not fit Trike models.
50716-04 Chrome – Smooth.
50357-04 Chrome – Grooved.
E. PASSENGER FOOTBOARD PANS – CHROME F. SWEPT WING PASSENGER FOOTBOARD K. HARLEY-DAVIDSON SCRIPT
PANS – CHROME SMOOTH OR GROOVED PASSENGER FOOTBOARD COVERS
294 TOURING & TRIKE TOURING & TRIKE 295
Engine Guards Engine Guards
A. MUSTACHE ENGINE GUARD* E. CHOPPED ENGINE GUARD*
Combine classic shape and modern function for a unique twist Create a sleek, slammed look on your custom bagger with the
on engine protection. The flow of this engine guard comple- Chopped Engine Guard. This guard offers a slim, low-profile
ments the bike’s traditional style while the gracefully curved design that retains function while delivering a unique styling
upper section incorporates highway pegs into the shape. The twist. The upper mounts connect midway up the downtube, 11"
integrated rubber pads offer a comfortable and slip-resistant lower than the stock guard. The minimalistic look reduces the
cushion for your feet while traveling the open road. One-piece visual mass of the bike, while the mounting point lowers the
engine guard kit includes all required mounting hardware. bike’s visual center of gravity. The 1.25" Engine Guard features
a slightly forward sweep that provides plenty of room around
Fits ’09-later Touring and Trike models (except Road Glide®). the brake and shift levers. Easy to install.
Does not fit models equipped with fairing lowers. ’15-later
FLRT models require the separate purchase of Bracket P/N Fits ’14-later Touring models (except Road Glide® and models
45700054. ’10-’11 FLHXXX models require the separate equipped with fairing lowers).
purchase of Bracket P/N 83865-09. 49000105A Chrome.
49155-09B Chrome. 49000114A Gloss Black.
49442-10A Gloss Black.
Fits ’14-later Road Glide models (except models equipped
Fits ’97-’08 Touring models (except Road Glide). Does not fit with fairing lowers). Kit includes replacement fairing mount
models equipped with fairing lowers. brackets.
49155-05B Chrome. 49000235 Chrome.
49000117A Gloss Black.
B. ENGINE GUARD – CHROME*
Protect your bike without sacrificing ground clearance or style. F. ENGINE GUARD MOUNTING BRACKET – GLOSS
The one-piece engine guard is designed to complement the BLACK
lines of the motorcycle, and the bright chrome finish adds the A. MUSTACHE ENGINE GUARD – CHROME A. MUSTACHE ENGINE GUARD – GLOSS BLACK E. CHOPPED ENGINE GUARD – CHROME
(49000105A SHOWN) This bracket locates the steering damper and clutch cable
perfect finishing touch. mount when an engine guard is mounted on a FLRT model.
49184-09A 45700054
Fits ’09-later Touring and Trike models (except ’18-later Fits ’15-later FLRT models.
FLTRXSE and ’21-later FLTRXS or ’22-later FLTRXST). ’15-
later FLRT models require the separate purchase of bracket
P/N 45700054. ’10-’11 FLHXXX models require the separate
purchase of Bracket P/N 83865-09.
D. CENTER STAND
Lifting your bike upright and off the side stand is ideal for
cleaning and servicing, and reduces the space required for
parking – handy where space is at a premium in a crowded
TOURING
garage, a small parking spot or at a ride-in bike show. The
robust chrome Center Stand attaches directly to the frame
and does not reduce the lean angle. Designed to work with B. ENGINE GUARD – CHROME C. ENGINE GUARD – GLOSS BLACK E. CHOPPED ENGINE GUARD – GLOSS BLACK
all Original Equipment suspension configurations and with (49000117A SHOWN)
Profile® suspension lowering kits, the adjustable feet can be
set to lift the rear tire clear of the pavement, or to keep the
rear tire on the ground for reduced lifting effort. The lifting
lever is inconspicuously tucked away, and fits with all Harley-
Davidson® Original Equipment and accessory footboards.
Kit includes chrome stand, black mounting brackets and all
necessary installation hardware.
91573-09A
Fits ’09-later Touring models (except FLHTKSE, FLTRUSE,
’07-’11 FLHTCUSE and models equipped with Adjustable
Passenger Footboard Mount Kit P/N 50768-07) with Original
Equipment or Profile® Low Suspension.
*WARNING: Engine guards may provide limited leg *WARNING: Engine guards may provide limited leg
and cosmetic vehicle protection under unique circum- and cosmetic vehicle protection under unique circum-
stances (fall over while stopped, very low speed slide). stances (fall over while stopped, very low speed slide).
They are not made nor intended to provide protection They are not made nor intended to provide protection
from bodily injury in a collision with another vehicle or from bodily injury in a collision with another vehicle or
any other object. any other object.
*WARNING: Do not use engine guard footpegs under *WARNING: Do not use engine guard footpegs under
normal stop and go operating conditions. Doing so normal stop and go operating conditions. Doing so
could result in death or serious injury. could result in death or serious injury.
*WARNING: Do not use highway pegs under normal *WARNING: Do not use highway pegs under normal
stop and go operating conditions. Doing so could result stop and go operating conditions. Doing so could result
in death or serious injury. in death or serious injury.
D. CENTER STAND E. CHOPPED ENGINE GUARD – CHROME F. ENGINE GUARD MOUNTING BRACKET –
GLOSS BLACK
296 TOURING & TRIKE TOURING & TRIKE 297
Suspension Suspension
PR E M I U M ADJ U S TA B LE A. SCREAMIN' EAGLE®/ÖHLINS® REMOTE RESERVOIR
REAR SHOCKS
Upgrade to Screamin’ Eagle® Factory Race Team suspension
P E R FO R M A N C E S U S P E N S I O N with these performance rear shocks. These high-performance
rear shocks for Touring models were designed with Öhlins®
specifically for Screamin’ Eagle® Factory Team race bikes. Now
you can experience the ultimate in handling and ride qual-
ity with these Screamin’ Eagle®/Öhlins® Remote Reservoir
Step up to the ultimate in handling and ride quality. Screamin' Eagle®/Öhlins® Remote Reservoir Rear Shocks for Rear Shocks. These mono tube remote reservoir shocks are
completely adjustable to match your riding style. Set the sag
Harley-Davidson ® Touring models were designed for Screamin' Eagle® Factory Team race bikes and it's what the Wymans with the adjustable preload then fine tune the response with
had on their Road Glide ® Special motorcycles. Fully adjustable for preload and compression/rebound damping, with a remote adjustable compression and rebound damping. These shocks
perform great and add a performance style with a remote
reservoir for optimal performance and style. Use these shocks to dial in your ideal combination of handling and ride, reservoir and exposed adjusters.
- Get a perfect factory fit. Reservoir brackets are designed to
for the street or the track. Ride like a winner. accommodate all Harley-Davidson® accessories
- Expertly tuned by Ohlins and Screamin’ Eagle for the
aggressive performance bagger rider in mind
- Preload setting on both shocks allows suspension
adjustment based on rider, passenger, and gear weight for
optimal performance
- No tools required for compression and rebound damping
adjustments so changes can be made quickly and easily
- High-performance style: Exposed remote reservoirs with
stainless steel lines and
Screamin’ Eagle/Öhlins branding
- Progressive rate springs stiffen quickly for improved control
when you pick up the pace
- Standard Height with +8/-2 mm of length adjustment
- High-pressure nitrogen gas-charged design resists heat
fading
- Low-friction shaft/seal head design for smooth performance
- 36mm piston diameter
- Includes billet aluminum preload adjustment tool
Fully serviceable and rebuildable
Fits ’14-later Touring models (except FLHTKL and FLHTCUL).
54000193
A. SCREAMIN' EAGLE®/ÖHLINS® REMOTE RESERVOIR REAR SHOCKS
TOURING
1 C OMP RESSION 2 REBOUND ADJUSTER 3 PRELOAD ADJUSTER
A DJ UST ER Fine-tunes the downward wheel Critical to setting the proper
Fine-tunes suspension to control movement after riding over bumps suspension travel to soak up large
the upward wheel movement or potholes potholes and absorb large bumps
when hitting a bump Adjusts the speed at which the Adjusts for rider sag–the amount
suspension returns from extension the suspension drops under the 1
Adjusts the speed at which the
suspension compresses weight of the rider and cargo
Critical for balancing ride quality and
Critical for balancing ride quality suspension bounce
and suspension bottoming
4 REMOTE R E S E R V O I R 5 LENGTH
Remote reservoir keeps the shock The shock length is adjustable
from +8mm or -2mm over the 3
oil cooler to maintain damping
performance standard height.
2
4
TOURING
dive, improves cornering and enhances bottoming control. later models.
The kit includes fork pipes, cartridges, fork bolts, main springs
and oil seals. I. PROFILE® LOW TOURING AIR SHOCKS*
C. PREMIUM RIDE FRONT FORK KIT – TRIKE D. PREMIUM RIDE DOUBLE CARTRIDGE G. PREMIUM RIDE HAND-ADJUSTABLE TOURING H. PREMIUM RIDE HAND-ADJUSTABLE SHOCKS Lower the seat height of your Touring model without compro-
45500106 Standard-Height. MODELS FORK KIT SHOCKS – LOW – TRIKE MODELS
Fits ’09-’13 Touring models. Does not fit Trike models. mising the ride. The Profile® Low Touring Shocks have been
re-valved for a comfortable ride while lowering the seat height
E. PROFILE LOW TOURING FRONT LOWERING KIT1,2 by up to .75". The kit maintains the air adjustability feature of
Place the rider’s feet firmly on the ground. This kit utilizes the stock shocks.
components designed to provide a 1.0" decrease in ride height. 54635-09
54564-09 Fits ’09-’16 Touring models. Does not lower ’09-’16 FLHX,
Fits ’09-’13 Touring models (except FLHR, FLHRC, FLHRSE, FLHXS, FLTRX, FLTRXS, FLHTCUL, FLHTKL, FLHRSE, FLTRSE
FLHXSE, FLTRSE and FLTRXSE models). Does not fit Trike and FLTRXSE models. Does not fit Trike models.
models. Must only be installed on vehicles equipped with 54631-02B
Profile® Low Touring Shocks P/N 54635-09 or Premium Ride Fits ’97-’08 Touring models (except ’07-’08 FLHRSE). Does
Low Shocks P/N 54000091. Can be installed on FLHX and not lower FLHRS or FLHX models.
FLTRX models with Original Equipment rear shocks.
J. ANALOG TOURING SUSPENSION AIR PUMP
Aluminum housing is compact, lightweight and durable, and
1 fits easily into your bag for on-the-road adjustments. The high-
WARNING: Installation of any accessory
suspension components may affect corner-
quality 0-60 psi gauge ensures accurate air pressure.
ing clearance and jiffy stand operation. This 54630-03A
could distract the rider, causing loss of control For use with Touring air suspension components.
and death or serious injury.
2
WARNING: The Profile Low Front Suspension
cannot be used independently and must
be used with the appropriate lowered rear
suspension kit. Installation of any accessory
*
suspension components may affect corner- WARNING: Installation of any accessory suspension
ing clearance and jiffy stand operation. This components may affect cornering clearance and jiffy
could distract the rider, causing loss of con- stand operation. This could distract the rider, causing
trol and death or serious injury. loss of control and death or serious injury.
E. PROFILE LOW TOURING FRONT LOWERING KIT I. PROFILE LOW TOURING AIR SHOCKS* J. ANALOG TOURING SUSPENSION AIR PUMP
300 TOURING & TRIKE TOURING & TRIKE 301
Front Forks Front Forks
A. LOWER FORK SLIDERS – CHROME C. FRONT END KIT – CHROME
Competitively priced, these chrome-plated Lower Fork Sliders The front forks on a Harley-Davidson® motorcycle set the
give your bike upfront style. To ensure proper fitment and func- tone for the bike, and can lead the way to a full-bore custom
tion, these sliders are manufactured from Original Equipment statement. So start customizing by adding chrome where it
components. A perfect addition during the installation of will have the most noticeable impact on the overall look of the
Premium Ride or Profile® Low Front suspension components, bike: the front end. A perfect addition during the installation of
the kit features polished, triple chrome-plating and stamped Premium Ride or Profile® Low Front suspension components.
Harley-Davidson logo. This package includes components necessary to completely
45500171 chrome the front forks and includes Chrome Fork Sliders,
Fits ’14-later Touring models. Does not fit Trike models. Chrome Upper Fork Slider Covers and Classic Chrome Front
Axle Nut Covers (kit components vary depending on model).
45500200
Fits ’14-later Trike models. 45800037
Fits ’14-later Touring models.
45500167 45500171
Fits ’00-’13 Touring models. 45800035
Fits ’08-’13 Touring models (except models with ABS option).
B. LOWER FORK SLIDERS – GLOSS BLACK 45800034
These gloss black coated sliders are the ultimate extension of Fits ’08-’13 Touring models with ABS option.
your bike’s “dark side” and make a perfect custom addition to 45800036
your blacked-out ride. Manufactured to Original Equipment Fits ’00-’07 Touring models.
specifications, the durable black coating is a great match to
other H-D® black components. A perfect addition during the D. FRONT END KIT – GLOSS BLACK
installation of Premium Ride or Profile Low front suspension Lead the way to the dark side. This complete blacked-out
components, this includes right and left sliders. Front End Kit includes all the major components required to
45500172B C. FRONT END KIT – CHROME D. FRONT END KIT – GLOSS BLACK convert the Original Equipment satin-finished front end to a
Fits ’14-later Touring models. Does not fit Trike models. ’14-LATER MODELS ’14-LATER MODELS dark custom style. A perfect addition during the installation of
46546-03 Premium Ride or Profile Low Front suspension components.
Fits ’00-’13 Touring models. This package includes Gloss Black Fork Sliders, Gloss Black
Upper Fork Slider Covers, Gloss Black Front Axle Nut Covers
and Gloss Black Outer Fairing Skirt.
45800038B
Fits ’14-later Touring models (except Road King® and Road
Glide® models)
45800022
Fits ’08-’13 Electra Glide® and Street Glide® models.
TOURING
different from the rest. These gloss black accessories are
the ultimate extension of the Harley-Davidson philosophy.
E. UPPER FORK SLIDER COVERS – CHROME F. UPPER FORK SLIDER COVERS – GLOSS Manufactured from Original Equipment components, these
BLACK parts provide superior fit and finish.
45600023
Fits ’14-later Touring and Trike models.
45500172B 45591-02
Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF
(except ’07), FLSTFB, FLSTFBS, FLSTNSE and FLSTN, ’10-’12
FLSTSE and ’80-’13 Touring and Trike models.
B. LOWER FORK SLIDERS – GLOSS BLACK G. EDGE CUT UPPER FORK SLIDER COVERS G. EDGE CUT UPPER FORK SLIDER COVERS
302 TOURING & TRIKE TOURING & TRIKE 303
Suspension Trim & Brakes Brake Trim
A. FRONT FORK AIR BAFFLE – CHROME H. FORK AXLE RETAINER NUT KIT – CHROME
Deflect the cold night wind rushing between the fork tubes It’s the details that count. Complete the chrome transforma-
of your Touring model. This stylish chrome air baffle replaces tion by adding this finishing touch to your chrome fork sliders.
the Original Equipment black baffle on ’00-earlier models. This Axle Retainer Nut Kit includes the stylish chrome-plated
Includes chrome mounting hardware. nuts and chrome lockwashers necessary to replace the stock
58520-79TC hardware.
Fits ’80-’13 FLHR, FLHT, FLHX and FLT models. 45813-03
Does not fit Trike models. Fits ’91-’05 FXDWG, ’86-’07 FLST, FLSTC, FLSTF and FLSTN,
’91-’07 FXST and FXSTB and ’84-’13 Touring and Trike models.
B. BRAKE CALIPER KIT – RED
Dress your bike in the latest high-performance look. Brilliant Also available:
red calipers make a powerful visual statement, and set your FORK SLIDER DRAIN SCREW KIT – CHROME
bike apart from the ordinary. Manufactured from Original It’s the details that count. Complete the chrome transforma-
Equipment components for proven performance, these cali- tion by adding this finishing touch to your chrome fork sliders.
pers will add a stylish touch to the stock bike, or add the This Fork Slider Drain Screw Kit includes two chrome-plated
perfect finish to a complete custom equipped with chrome or drain screws and the seals required to replace the stock
A. FRONT FORK AIR BAFFLE – CHROME H. FORK AXLE RETAINER NUT KIT – CHROME
blacked-out wheels, rotors and fork sliders. hardware.
41300116 Front – Dual Disc. 45848-03
Fits ’06-’17 VRSC™, ’08-later Touring and ’09-’13 and ’19- Fits ’93-’05 FXDWG, ’87-’17 Softail® (except Springer™,
later Trike models. Brake pads sold separately. FXCW, FXCWC, FXSB, FXSBSE, FXSE and FXSTD) and ’87-’13
Touring and Trike models.
C. BRAKE CALIPER KIT – CHROME
Add the shine of chrome to your bike with these highly I. CUSTOM CALIPER BOLT COVER KIT
polished Chrome Brake Caliper Kits. Manufactured from Cover your 12-point caliper bolts in chrome. These easy-to-
Original Equipment components for proven performance, install chrome covers are held firmly in place with a steel
these calipers are a great addition to the stock bike, or add the spring clip, and are styled to match the Chrome Rocker Box
finishing touch to a complete custom equipped with chrome Bolt and Headbolt Covers.
wheels, rotors and fork sliders. 40955-05 Four Large and Two Small Covers.
42012-06A Front – Dual Disc. Fits ’00-later front brake calipers (except Springer, ’06-later
Fits ’06-’17 VRSC, ’08-later Touring and ’09-’13 and ’19-later VRSC™, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-later
Trike models. Brake pads sold separately. Softail, ’08-later Touring and Trike and models equipped with
41300181 Front – Dual Disc. caliper covers). Also fits rear calipers on ’06-’17 Softail
Fits ’14-later Trike models. Brake pads sold separately. models (except FXCW and FXSE).
40959-05 Three Large and Two Small Covers.
D. CALIPER SCREEN INSERT – CHROME Fits ’00-later rear brake calipers (except Springer, ’06-later
These chrome-plated Caliper Inserts replace the Original VRSC, ’04-later XL, ’15-later XG, ’16-’17 FXDLS, ’18-later
Equipment satin-finish screens featured on Brembo® brake Softail, ’08-later Touring and Trike and models equipped with
calipers. Easy pop-in installation. Sold individually. caliper covers). Also fits rear calipers on ’06-’17 Softail
42054-05 Front. models (except FXCW, FXSE).
B. FRONT BRAKE CALIPER KIT – RED C. FRONT BRAKE CALIPER KIT – CHROME I. CUSTOM CALIPER BOLT COVER KIT – (40955-05 SHOWN)
Fits ’06-’17 VRSC, ’08-later Touring and ’09-’13 and ’19-later (41300116 SHOWN) (42012-06A SHOWN)
Trike models. J. 1. BRAKE BLEEDER SCREW COVER
This cover adds chrome to the unfinished bleeder valve on all
E. CALIPER SCREEN INSERT – GLOSS BLACK stock H-D® calipers. Package of two.
Complete the blacked-out transformation. Gloss black inserts 43834-98
replace the satin-finish screens featured on Harley-Davidson® Fits ’84-later stock calipers (except XG and XR models).
Original Equipment Brembo® brakes, and add a rich comple-
2. BANJO BOLT COVER
ment to the wrinkle black caliper finish. Easy pop-in installa-
Die-cast chrome cover provides a custom look to your stock
tion. Sold individually. 1
banjo bolts. Fits banjo bolts on front and rear brake master
41300154 Front. cylinders and front and rear calipers. Installs in seconds.
Fits ’06-’17 VRSC, ’08-later Touring and ’09-’13 and ’19-later
32715-98
Trike models.
Fits ’84-later models with stock master cylinders and
TOURING
calipers. (Does not fit VRSC Rear Master Cylinder, ’06-’17
F. FRONT WHEEL SPACERS – CHROME VRSC calipers, ’15-later XG, ’04-later XL, or ’08-later Dyna®,
There’s always more room for chrome with these highly Softail, Touring and Trike models).
polished chrome wheel spacers. They are manufactured to
the Original Equipment tolerances, so you get exact product
K. CALIPER HARDWARE KIT – CHROME
fitment and quality.
2 Chrome-plated hardware is a great finishing touch to Chrome
41371-08 Domed. Brake Calipers. This kit replaces the Original Equipment black
Fits ’08-later Touring models with ABS brakes. 12-point bolts on a single caliper.
44473-02A
G. FRONT WHEEL SPACERS – GLOSS BLACK Fits ’00-’07 models (except Springer front caliper, ’06-’07
It is all in the details. Complete your total front end with these VRSC, ’04-’07 XL, and ’06-’07 FX Softail rear calipers).
wheel spacers in gloss black. Manufactured to the Original D. CALIPER SCREEN INSERT – CHROME E. CALIPER SCREEN INSERT – GLOSS BLACK J. BLEEDER SCREW AND BANJO BOLT COVERS K. CALIPER HARDWARE KIT – CHROME
Equipment tolerances, they deliver the exact fitment and
L. BRAKE CALIPER INSERTS
custom shine.
Easy-to-install inserts add a finishing touch to the front and
42400016 Domed. rear brake calipers. Select a style that follows your custom
Fits ’08-later Touring models with ABS brakes. direction. Self-adhesive backing.
1 1
Fits ’00-later front and rear brake calipers on all models
(except Springer front, ’06-later VRSC, ’15-later XG, ’04-later
XL, ’18-later Softail rear caliper, and ’08-later Touring and
Trike).
1. 44477-99 Classic Chrome.
2
2 2. 44476-99 Harley-Davidson Script.
F. FRONT WHEEL SPACERS – G. FRONT WHEEL SPACERS – L. BRAKE CALIPER INSERTS M. BRAKE CALIPER TRIM DISCS
CHROME, DOMED GLOSS BLACK, DOMED
304 TOURING & TRIKE TOURING & TRIKE 305
Front Axle Nut Covers Front Axle Nut Covers
FRONT AXLE NUT COVERS FRONT AXLE NUT COVERS
Cover the front axle in style. Available in your choice of Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-’20 XG,
styles, these custom Axle Nut Covers look great with Original ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except
Equipment satin-finish fork sliders or add the finishing touch Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE,
to a complete chrome or blacked-out front end. Easy to install FXST-Aus, and FXSTD) and ’08-later Touring and Trike
kits include all necessary mounting hardware. Sold in pairs. models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB,
FLSL, FXBB, FXBBS, FXBR, FXBRS and FXLR models require
Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-’20 separate purchase of Front Axle Adapter Kit P/N 43000090.
XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except ’19-’20 FXDRS, ’18-later FXFB and FXFBS and ’20-later
Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXLRS and FXLRST models. require separate purchase of
FXST-Aus, and FXSTD) and ’08-later Touring and Trike models. Front Axle Adapter Kit P/N 43000159.
’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB,
FXBBS, FXBR, FXBRS and FXLR models require separate F. H-D MOTOR CO. LOGO FRONT AXLE NUT COVERS –
purchase of Front Axle Adapter Kit P/N 43000090. ’19-’20 GLOSS BLACK
FXDRS, ’18-later FXFB and FXFBS and ’20-later FXLRS and Cover the front axle in style. Drenched in gloss black and
FXLRST models. require separate purchase of Front Axle trimmed with deep cut, silver-filled Harley-Davidson Motor
Adapter Kit P/N 43000159. F. H-D MOTOR CO. LOGO FRONT AXLE NUT G. H-D MOTOR CO. LOGO FRONT AXLE NUT Co. lettering, these Axle Nut Covers are an aggressive twist on
COVERS – GLOSS BLACK COVERS – CHROME a classic style. The covers look great with Original Equipment
A. DOMINION™ COLLECTION FRONT AXLE NUT COVERS satin-finish fork sliders or are the perfect finishing touch to
Express your bold, renegade attitude. The machined alumi- complete a blacked-out front or rear end. These easy-to-
num Dominion™ Collection Front Axle Nut Covers add style to install kits include all necessary mounting hardware. Sold in
the front of the bike and are the perfect complement to other pairs.
Dominion Collection accessories.
43000177 Gloss Black.
43000124 Gloss Black.
A. DOMINION FRONT AXLE NUT COVERS – A. DOMINION FRONT AXLE NUT COVERS –
43000123 Bronze. G. H-D MOTOR CO. LOGO FRONT AXLE NUT COVERS –
GLOSS BLACK BRONZE
CHROME
B. MACHINE CUT FRONT AXLE NUT COVERS Die-cast, chrome-plated covers feature the Harley-Davidson
Add some edgy custom detail to the front end and express big Motor Co. logo in black. Includes Allen®-head set screws and
attitude with contrasting style. wrench for easy installation.
43000212 Black Machine Cut. $59.95 44148-07A
C. CHROME FRONT AXLE NUT COVERS H. WILLIE G SKULL FRONT AXLE NUT COVERS
44117-07A Die-cast. Penned at the hand of Willie G, the famous Skull Collection
adds a little attitude to your ride. Completely drenched in
44116-07A Billet.
black or chrome with black filled accents, the raised skull and
surrounding Harley-Davidson Motorcycle script adds a subtle
D. GLOSS BLACK FRONT AXLE NUT COVERS ominous touch to your ride. The Axle Nut Covers are easy to
43000026 Die-cast. install and include all necessary mounting hardware. Sold in
43428-09 Billet. pairs.
H. WILLIE G SKULL FRONT AXLE NUT COVERS – H. WILLIE G SKULL FRONT AXLE NUT COVERS – 43000096 Black.
E. ALUMINATOR® FRONT AXLE NUT COVERS GLOSS BLACK CHROME 43163-08A Chrome.
Chrome-plated billet aluminum axle covers feature a clas-
sic Bar & Shield logo insert. Includes all necessary mounting
I. FRONT AXLE NUT COVERS – BRASS COLLECTION
hardware for easy installation.
Cover the front axle in style. Artistically manufactured from
44114-07 solid brass, these components feature a natural antique finish
that will age and patina when exposed to the elements. Brass
Collection Axle Nut Covers look great with Original Equipment
satin-finish fork sliders or as the finishing touch to a blacked-
out front end. Easy-to-install kits include all necessary mount-
ing hardware. Sold in pairs.
43000046
Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-’20 XG,
TOURING
’08-later XL (except ’16-later XL1200X and XL1200XS), ’08-
’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB,
B. MACHINE CUT FRONT AXLE NUT COVERS C. CHROME FRONT AXLE NUT COVERS FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE,
FXSE, FXST-Aus, and FXSTD) and ’08-later Touring and Trike
models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL,
FXBB, FXBBS, FXBR, FXBRS, FXLR and FXST models require
separate purchase of Front Axle Adapter Kit P/N 43000090.
’19-’20 FXDRS, ’18-later FLSB, FXFB and FXFBS and ’20-later
FXLRS and FXLRST models require separate purchase of
Front Axle Adapter Kit P/N 43000159.
I. BRASS COLLECTION FRONT AXLE NUT COVERS
J. CHROME FRONT AXLE NUT COVERS
Fits ’04-’07 Dyna (except ’07 FXDSE and ’04-’05 FXDWG) and
’00-’07 Touring models.
43062-04 Chrome – Die-cast.
43061-04 Chrome – Billet.
Fits ’88-’07 XL, ’91-’03 FXD, FXDX, FXDXT, FXDL, FXDS-
CONV, ’93-’05 FXDWG, ’88-’07 FXR, ’87-later FLXR, FXRS-SP
and FXWG, ’84-’06 Softail (except Springer and FXSTD) and
’80-’99 Touring models.
43899-86A Chrome – Die-cast.
D. GLOSS BLACK FRONT AXLE NUT COVERS E. ALUMINATOR FRONT AXLE NUT COVERS J. CHROME FRONT AXLE NUT COVERS K. H-D MOTOR CO. LOGO FRONT AXLE NUT
COVERS
306 TOURING & TRIKE TOURING & TRIKE 307
Chassis Trim Custom Bagger – Bodywork
A. OIL COOLER COVER D. CUSTOM REAR FENDER SYSTEM – PRIMED
Dress the Touring oil cooler in style. This Oil Cooler Cover is This custom rear fascia and fender kit keeps the back of your
designed to hug the contours of the cooler body and does bike clean, classy and simple. Originally featured on CVO™
not interfere with the engine guard or voltage regulator. The Touring models, this kit smoothly blends the shape of the rear
forward-facing mesh screen adds a custom touch, and fender into the saddlebags and hides the saddlebag mount-
protects the oil cooler fins from road debris without disturb- ing structure.
ing the airflow across the surface. Available in your choice
of chrome or gloss black finish, the easy-to-install cover kit Fits ’14-later Touring models (except FLHRC and CVO™
includes all required mounting hardware. models). Does not fit models equipped with Saddlebag
Guard Rails P/N 9020056, 90201902 or 90201903. Requires
Fits ’17-later FLHR, FLHRC, FLHT, FLHX, FLHXS, FLHXST, Separate purchase of Rear Tail Light P/N 67801090 (U.S.
FLTRX, FLTRXS and FLTRXST models. Does not fit models Domestic) or 67801091 (HDI). Does not fit Canada models.
equipped with fairing lowers. Does not fit with Fan-Assisted 59500246A
Oil Cooler P/N 62700204 or Bolt-On Oil Cooler Fan P/N Domestic and HDI (except Canada).
26800195.
25700633 Chrome. Fits ’14-later Canadian Touring models (except FLHT,
FLHRC and CVO™ models). Does not fit models equipped
25700634 Gloss Black. with Saddlebag Guard Rails P/N 90200561,90201902 or
90201903.
B. OIL COOLER COVER KIT – CHROME
Dress the Touring Oil Cooler in style. This Chrome Oil Cooler 59500245A
Cover is designed to hug the contours of the cooler body Canada.
while allowing complete airflow across the surface. Includes Fits ’09-’13 Touring models (except FLHRC). FLHTC and
required mounting hardware. FLHTCU models require separate purchase of Saddlebag
63121-11A A. OIL COOLER COVER – CHROME A. OIL COOLER COVER – GLOSS BLACK Support Kit P/N 90881-09.
Fits ’11-’16 Touring and Trike models (except models 59500105BEO
equipped with Twin-Cooled™ engines). Domestic.
TOURING
B. OIL COOLER COVER KIT – CHROME
’11-’16 TOURING
C. WATER PUMP COVER – CHROME D. CUSTOM REAR FENDER SYSTEM – ’09-’13 DOMESTIC MODELS
308 TOURING & TRIKE TOURING & TRIKE 309
Headlamp & Fender Trim Headlamp & Fender Trim
A. STREET GLIDE® FRONT BULLET TURN SIGNAL G. FL TOURING CLEAN FRONT FENDER
MOUNT KIT – GLOSS BLACK With no holes, this fender provides the starting point for
Complement the lean, stripped-down look of your Street customization. Offered in primed finish and ready to bolt onto
Glide® model. Manufactured from Original Equipment compo- existing brackets.
nents, these rich gloss black Turn Signal Mounts replace the 59045-00B
factory-installed chrome mounts to complete the blacked- Fits ’94-’13 FLHR and ’89-’13 FLHT and FLT models.
out look. The brackets serve as stylized mounting points for
the Original Equipment or accessory LED bullet turn signals, H. FRONT FENDER ADAPTER KIT
and conceal the wiring for a clean, custom appearance. Kit Add a true custom style to your Touring model. This polished
includes left and right mounting bracket. and chrome-plated Adapter Kit will allow you to install the
67800706 smooth curving Fat Boy® or Street Stalker™ front fender on
Fits ’14-later FLHX, FLHXS and FLHXSE models. your Touring bike. Manufactured from 6061-T6 billet alumi-
num, this kit includes all necessary mounting hardware. See
B. ROAD GLIDE® FRONT BULLET TURN SIGNAL your Dealer for primed or color-matched fender options.
MOUNTS – GLOSS BLACK 58900085A
Complete the sinister look of your Road Glide® model. A. STREET GLIDE FRONT BULLET TURN SIGNAL B. ROAD GLIDE FRONT BULLET TURN SIGNAL G. FL TOURING CLEAN FRONT FENDER H. FRONT FENDER ADAPTER KIT – ’14-LATER Fits ’14-later Touring models (except models equipped with
Manufactured from Original Equipment components, these MOUNT KIT – GLOSS BLACK MOUNTS – GLOSS BLACK MODELS fairing lowers). Does not fit Trike models.
rich gloss black Turn Signal Mounts replace the factory-
installed chrome mounts, and continue the blacked-out I. VOLTAGE REGULATOR COVER – CHROME
look. The brackets serve as stylized mounting points for the This chrome-plated steel cover features an open-faced design
Original Equipment or accessory LED bullet turn signals, and to allow airflow through the voltage regulator. Chrome-plated
are the perfect complement to Gloss Black Fairing Support mounting hardware included.
P/N 47200278, a gloss black engine guard and gloss black
front end components. Kit includes right- and left-hand 74538-09
mounts. Fits ’09-’13 Touring (except models with oil coolers). Will not
fit models equipped with a sidecar.
67800707
Fits ’15-later Road Glide models. 74543-00
Fits ’97-’08 Electra Glide®, Road Glide® and Road King®
(except models with oil coolers). Will not fit ’07-later models
C. FRONT FENDER TRIM KIT – CHROME
equipped with a sidecar.
Replace the Original Equipment stainless steel fender trim
with a splash of chrome. Kit includes left and right side trim
strip. J. TIE-DOWN BRACKETS — CHROME
Simplify the process of securing your bike to a trailer or bike
59209-91T lift. These stylish chrome Tie-Down Brackets mount cleanly to
Fits ’86-’17 FLSTC and FLSTN and ’82-’13 Touring models the front fork cover and offer a secure method to connect tie-
(except Road Glide® and Road King® Custom). Does not fit down straps. Moving the tie-down point from the handlebar
models equipped with clean front fender. to the triple-tree area reduces wear on the handlebar bush-
ings and ensures a consistent easy-to-access mounting point.
D. AIR WING FRONT FENDER RAIL* Just add Harley-Davidson® Ratchet Straps and Soft Hooks
Shaped by the wind, this aerodynamic front fender rail features and you’re ready to go.
an inverted-wing tip and support rails that complement the C. FRONT FENDER TRIM KIT – CHROME I. VOLTAGE REGULATOR COVER – CHROME J. TIE-DOWN BRACKETS – CHROME
(’09-’13 MODELS SHOWN) 93500011
sweeping lines of the fender. As a stylish replacement for the
Fits ’14-later Touring models (except Road Glide® and Road
traditional rubber bumper and rails, the completed installa-
King®). Does not fit Trike models.
tion mirrors the design of the Original Equipment fender tip
and spears. The hidden hardware adds to the clean, custom 93500006
appearance. The mirror chrome surface and embossed Fits ’02-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS,
Harley-Davidson lettering finishes the look. ’95-later FLHR, FLHRC and FLHRXS, ’95-’13 FLHT, FLHTC
and FLHX, ’10-’13 FLHTCU and FLHTK, ’10-’12 FLHXSE and
59600022
’09-’12 FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS
Fits ’14-later FLHTCU, FLHTCUL, FLHTK and FLHTKL models.
models without a windshield require separate purchase of
Hardware Kit P/N 91800030.
E. V-LOGO FRONT FENDER RAIL*
A stylish re-creation of a popular Hydra Glide accessory, this
K. OUTER FAIRING SKIRT – GLOSS BLACK
twin tube design sweeps smartly back along the front fender. K. OUTER FAIRING SKIRT – ’14-LATER MODELS Add a sinister touch to your batwing fairing. This classic gloss
TOURING
Matching Touring V-Logo Rear Fender Rail P/N 91100-94 inte-
black skirt replaces the Original Equipment chrome or color-
grates the styling from front to rear. Includes mounting hard-
matched trim below the headlamp. The black skirt visu-
ware and installation instructions.
ally slims the fairing, and is the ideal finishing element on a
91099-94A blacked-out bike. Manufactured from Original Equipment
Fits ’80-’13 FLHR, FLHRC, FLHT, FLHTC, FLHTCU, FLHTK and components for superior fit and finish.
FLT, ’80-’93 FLHS and ’09-’13 FLHTCUTG models.
57100227
Fits ’14-later Electra Glide®, Street Glide® and Ultra Limited
F. V-LOGO REAR FENDER RAIL* models.
Designed with a similar styling theme to match our Touring
V-Logo Front Fender Rail P/N 91099-94A. Replaces the 46559-03
stock rear fender rail and rubber bumper on Touring models. Fits ’00-’13 FLHT, FLHTC, FLHTCU, FLHTK and FLHX models.
D. AIR WING FRONT FENDER RAIL K. OUTER FAIRING SKIRT – GLOSS BLACK K. OUTER FAIRING SKIRT – ’00-’13 MODELS Does not fit Trike models.
Chrome-plated twin tubes are crowned with a hand-polished
and chrome-plated cast V-Logo reminiscent of the Harley-
Davidson® 1953 Golden Anniversary medallion. Includes hard- L. ROAD GLIDE® FAIRING SUPPORT KIT – GLOSS BLACK
ware and installation instructions. Take your Road Glide in a different direction. Easy-to-install
Fairing Mount replaces the Original Equipment chrome edition,
91100-09 and forms a seamless gloss black transition between a black
Fits ’09-later FLHR, FLHRC, FLHRXS, FLHT, FLHTC, FLHTCU, engine guard and a dark color fairing. Kit includes gloss black
FLHTCUL, FLHTK, FLHTKL, FLTR, FLTRK and FLTRU models. left and right fairing support and matching engine guard
Does not fit with mud flaps. clamps.
47200278
Fits ’15-later Road Glide models.
E. V-LOGO FRONT FENDER RAIL F. V-LOGO REAR FENDER RAIL L. ROAD GLIDE FAIRING SUPPORT KIT – GLOSS BLACK
310 TOURING & TRIKE TOURING & TRIKE 311
Fender Trim Fender Trim
A. FRONT FENDER TRIM F. FRONT FENDER SKIRT
Add a sweeping dash of chrome to the front fender. Chrome- Designed as an easy-to-install replacement for the Original
plated tapered spear features a stepped design that accentu- Equipment fender trim, this formed steel fender skirt features
ates the flowing fender lines. Self-adhesive backing simplifies four raised accent ribs that wrap around the rear to add depth
installation. and texture. Available in your choice of mirror-finished chrome
14100618 or gloss black finishes, the skirt is the perfect complement to
Fits ’12-’16 FLD, ’86-’17 FL Softail® (except FLSTSB), ’18-later any styling direction. And for a distinctive look, the flat side
Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike panels are the perfect spot to place your choice of self-adhe-
models. sive medallions (sold separately). Kit includes mounting
hardware.
B. BAR & SHIELD LOGO FRONT FENDER SPEAR Fits ’14-later Touring and Tri Glide® models with Original
This chrome-plated trim spear adds a sweeping dash of Equipment fender skirts.
chrome to the front fender. Featuring a raised Bar & Shield
logo set against a textured black field, this self-adhesive 61400312 Chrome.
medallion is easy to install. 61400311 Gloss Black.
91195-04 Large. F. FRONT FENDER SKIRT – CHROME F. FRONT FENDER SKIRT – GLOSS BLACK
Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later G. FENDER SKIRT MEDALLIONS
Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike Personalize your fender skirts or almost any flat surface.
models. These heavy-weight cast three-dimensional medallions add a
distinctive look to your ride, and complement other available
Harley® accessory collections. Self-adhesive backing holds
C. BAR & SHIELD FENDER TIP LENS KIT 14100747 the medallion firmly in place. Medallions are approximately
Chrome-plated polycarbonate construction features trans-
1.5" diameter. Sold in pairs.
lucent Bar & Shield emblems. The kit includes front and rear
lenses. Front lens features an amber Bar & Shield, rear lens A. FRONT FENDER TRIM KIT B. BAR & SHIELD LOGO FRONT FENDER SPEAR 14100747 Bar & Shield.
features a red Bar & Shield. Quick and easy installation. 14100748 Classic H-D.
59081-96 Front and Rear. 14100749 Willie G Skull.
Fits ’86-’17 FLSTC, ’93-’96 FLSTN and ’80-’08 FLHR, FLHS, 14100748
FLHT and FLT models. (Does not fit Springer™, FLHRS or H. CONCHO FENDER SKIRT
FLTR models.) This decorative fender skirt features conchos inspired by the
Heritage Softail® Classic motorcycle.
D. FENDER TIP LENS KIT WITH SKULL LOGO 59147-96
This chrome-plated Fender Tip Lens Kit adds a little attitude to Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
your ride. The kit features front and rear lenses with a trans- and ’09-’13 Trike models equipped with Original Equipment
lucent illuminated skull silhouette. The easy-to-install kit fender skirt.
includes an amber front lens and red rear lens.
59651-01 14100749 I. WILLIE G SKULL FENDER SKIRT
Fits ’86-later FLSTC, ’93-’96 FLSTN and ’80-’08 Electra This decorative chrome-plated fender skirt is a direct replace-
Glide®, Tour Glide™ and Road King® models (except FLHRC ment for stock fender skirt. Features a three-dimensional
and FLHRS). sculptured concho with skull design set off with black accents.
G. FENDER SKIRT MEDALLIONS G. FENDER SKIRT MEDALLIONS
Mounting hardware included.
(BAR & SHIELD SHOWN)
E. H-D® CLASSIC FENDER TIP 59582-02A
Stock on Road King Classic models, these nostalgic-look Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
fender tips are also available for other models. Replaces and ’09-’13 Trike models equipped with Original Equipment
fender lamp assembly. fender skirt.
59002-98 Front.
Fits ’80-’13 FL, ’86-’08 FLSTC, ’94-’13 FLHR and ’09-’13 J. BAR & SHIELD FENDER SKIRT
FLHTCUTG models. This rigid-steel fender skirt, designed to replace the origi-
59052-98 Rear. nal factory-equipped aluminum trim, is formed, polished
Fits ’80-’08 FL and FLHR models and ’86-’99 FLSTC models. and chrome-plated. Its ribbed pattern offers a unique styl-
(Does not fit FLSTF and FLTR models.) ing element and adds rigidity. Subtle but distinctive brushed
aluminum Bar & Shield logos are framed by a stamped-in
ribbed outline on both sides.
TOURING
59228-91
Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring
C. BAR & SHIELD FENDER TIP LENS D. FENDER TIP LENS WITH SKULL LOGO and ’09-’13 Trike models equipped with Original Equipment
fender skirt.
Rear
E. H-D CLASSIC FENDER TIP E. H-D CLASSIC FENDER TIP J. BAR & SHIELD FENDER SKIRT K. ROAD KING CLASSIC FENDER SKIRT
312 TOURING & TRIKE TOURING & TRIKE 313
Fairing Trim Fairing Trim
A. GAUGE TRIM KIT – CHROME F. INNER FAIRING TRIM KIT – ROAD GLIDE®
A touch of chrome makes all the difference. These classic Add a touch of luxury and style to your dash. This complete
gauge bezels take just a few minutes to install, and add the kit dresses the inner fairing by surrounding the gauges, radio
beauty of chrome to your dash. Trim rings are formed to the faceplate and front speakers with chrome. Self-adhesive
gauge shapes and feature peel-and-stick adhesive backing for bezels are easy to install, and add a brilliant finish to matte or
permanent installation. No back plate is required for installa- gloss finish inner fairings. The 6-piece kit includes the Gauge
tion. The 4-piece kit includes two large and two small gauge Trim Kit, Radio Faceplate Trim and two Front Speaker Trim
bezels. Rings.
61400451 61400296 6-Piece Kit.
Fits ’14-later Electra Glide®, Street Glide™ model, Ultra Fits ’15-later Road Glide® models (except FLTRUSE). Does
Limited and Tri Glide® models. Fits with ’18-later CVO™ not fit models equipped with Boom!™ Audio Fairing
model backplate. Does not fit with Gauge Trim P/N Speakers.
61400328.
G. GAUGE TRIM KIT – ROAD GLIDE
B. RADIO TRIM BEZEL A touch of chrome makes all the difference. The classic gauge
This chrome faceplate trim accents the center section of the A. GAUGE TRIM KIT – CHROME B. RADIO TRIM BEZEL F. INNER FAIRING TRIM KIT – ROAD GLIDE bezels take just a few minutes to install, and add the beauty
inner fairing and highlights the radio. Trim is formed to the of chrome to your dash. Trim rings are formed to the gauge
radio surround and features peel-and-stick adhesive backing shapes and feature peel-and-stick adhesive backing for
for simple, permanent installation. permanent installation. The 3-piece kit includes speedo/tach
61400201 pod surround and 2 auxiliary gauge trim rings.
Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri 61400299 3-Piece Kit.
Glide® models. Fits ’15-later Road Glide models.
TOURING
2
3. Chrome Indicator Lamp Bezel Cover
74562-98
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
4. Radio and Gauge Faceplate Trim
74612-06
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
TOURING
B. GAUGE BEZEL KIT – GLOSS BLACK D. SPEAKER TRIM – FRONT D. SPEAKER TRIM – REAR
’96-’13 MODELS ’98-’13 MODELS
71400126A
25700870
C. IGNITION SWITCH & SWITCH PANEL TRIM – GLOSS BLACK E. BOOM! AUDIO STAGE I SPEAKER TRIM – E. BOOM! AUDIO STAGE I SPEAKER TRIM –
FRONT, ’14-LATER MODELS REAR, ’14-LATER MODELS
316 TOURING & TRIKE TOURING & TRIKE 317
Fairing Trim Fairing Trim
A. TAPERED FAIRING MOUNT MIRRORS E. SWITCH PANEL ACCENT
Reflect your personal style. These slim forged aluminum Dress for success. This handsome trim element frames the
Fairing Mount Mirrors minimize the profile at the edges ignition and flanking rocker switches in chrome. Simple to
of the Batwing Fairing for a clean custom look. The single- install with peel-and-stick adhesive, the kit also includes
stalk mount permits a wide range of adjustability and the inserts to cover inactive switch openings. Complete the
convex mirror face maximizes the field of view. The mirrors chrome look with optional Radio Trim P/N 74612-06 and
are designed as a direct replacement for the Street Glide® Chrome Gauge Bezels.
model’s Original Equipment mirrors, and can be installed on 61400001
other Batwing fairing-equipped models in place of handlebar- Fits ’96-’13 Electra Glide®, Street Glide® and Trike models.
mounted mirrors. Tapered Fairing Mirrors are available in your
choice of polished chrome or gloss black Edge Cut finish to F. FORK LOCK COVER
match your styling direction. This chrome-plated aluminum die-cast cover finishes the look
Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and of the Road King® fork lock. The protective cover adds a finish-
Tri Glide® models. ing touch to the handlebar cover and the smooth domed lid
flips up to provide access to the fork lock. Includes chrome-
56000098A Chrome. plated flush-mount hardware.
56000099A Edge Cut.
A. TAPERED FAIRING MOUNT MIRRORS – CHROME E. SWITCH PANEL ACCENT
71790-05 Fits ’94-later Road King models.
B. FAIRING MOUNT MIRRORS – BLACK
G. BULLSEYE CONSOLE NUT
Fairing Mount Mirrors offer a truly innovative look from the
Replace your plain stock chrome acorn nut with this special
traditional handlebar-mounted mirrors. Mounting just inside
chrome-plated Console Nut that features a machined Bullseye
the inner fairing, the molded plastic mirror housings comple-
design highlighted with black accent rings.
ment the contours of the batwing fairing. They provide a wide
range of adjustability and feature convex mirror glass that 94755-99
maximizes your field of view. The Bar & Shield logo is care- Fits ’93-’03 FXDWG, ’90-’95 and ’00-’17 Softail® (except
fully laser-etched on each mirror glass. Kit includes neces- FLSTSB, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXST-
sary hardware, instructions and mounting template for easy AUS, FXSTD and ’09-’17 FLS, FLSS and FLSTC) and ’94-’07
installation. Road King models.
56000076
H. GAUGE VISOR RING
Fits ’14-later Electra Glide, Ultra Limited and Tri Glide models.
A touch of chrome makes all the difference. These easy-to-
Original Equipment on Street Glide models (except
install trim rings feature an integrated eyebrow visor to shield
FLHTCUTG).
the gauge face from the sun’s glare. Self-adhesive backing for
91945-98B secure mount.
Fits ’96-’13 Electra Glide and Trike models. Original
equipment on Street Glide models. 74661-04 5" Gauge.
Fits ’12-’17 FLD, ’99-’08 FXDWG, ’15-’17 FXDF, ’99-’17 Softail
(except FLSTFSE, FLSTNSE, FXCW, FXCWC, FXS, FXSB,
C. FAIRING MOUNT MIRRORS – CHROME
FXSBSE, FXSE, FXST-Aus, FXSTD and models equipped with
Add a splash of chrome to the batwing inner fairing. These
Chrome Console P/N 67575-04), ’18-later FLSL, FLDE, FLHC
Fairing Mount Mirrors de-clutter the handlebar and add a
and FLHCS and ’99-’07 Road King models.
contemporary aero style to your ride. The attractive chrome A. TAPERED FAIRING MOUNT MIRRORS – EDGE CUT F. FORK LOCK COVER – CLOSED F. FORK LOCK COVER – OPEN
housing provides a custom look, and the convex mirror and
wide range of adjustment maximizes your field of view. A direct
bolt-on replacement for Original Equipment fairing mount
mirrors, the kit includes the hardware and mounting template
required for easy and accurate installation on many models.
56000077
Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri
Glide models. Original Equipment on Street Glide models
(except FLHTCUTG).
56000029
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
Original Equipment on ’12 FLHXSE models.
TOURING
D. ILLUMINATED FAIRING MOUNT MIRROR
COVERS – CHROME
Add auxiliary LED turn signals and a splash of chrome to the
inner fairing. The perfect finishing touch to a fully dressed
inner fairing, these chrome-plated mirror housings feature
fast-acting amber LED turn signals at the outer edge. Side
turn signals attract attention from the drivers around you, and
the plug-in, no-splice design simplifies installation.
56000084
Fits ’14-later Touring and Trike models with fairing-mount B. FAIRING MOUNT MIRRORS – BLACK C. FAIRING MOUNT MIRRORS – CHROME G. BULLSEYE CONSOLE NUT
mirrors. Does not fit with Split Vision Fairing Mount Mirrors
P/N 92085-10 or Tapered Fairing Mount Mirrors P/N
56000098A or 56000099A.
TOURING
I. LIVE TO RIDE FUEL TANK CONSOLE DOOR
B. FUEL TANK CONSOLE DOOR – C. PUSH-BUTTON FUEL TANK CONSOLE DOOR G. WILLIE G SKULL FUEL TANK CONSOLE H. WILLIE G SKULL FUEL TANK CONSOLE Live to Ride, Ride to Live. It has become the motto of the
GLOSS BLACK RELEASE DOOR – BLACK DOOR – CHROME Harley-Davidson nation, accompanying riders over millions
of miles of travel. This collection is a tribute to that way of
life. These easy-to-install Fuel Doors replace the stock door,
and reuse Original Equipment mounting hardware and lock.
Available in your choice of gold or chrome finish.
Fits ’08-later Electra Glide, Street Glide, Ultra Limited, Road
Glide and Tri Glide models with center fill tank.
61335-09A Gold.
61300049A Chrome.
Fits ’92-’07 Electra Glide, Tour Glide and Road Glide models
with center fill tank.
61286-92T Gold.
D. SMOOTH PUSH-BUTTON FUEL TANK D. SMOOTH PUSH-BUTTON FUEL TANK I. LIVE TO RIDE FUEL TANK CONSOLE DOOR – I. LIVE TO RIDE FUEL TANK CONSOLE DOOR –
CONSOLE DOOR RELEASE – GLOSS BLACK CONSOLE DOOR RELEASE – CHROME CHROME GOLD
320 TOURING & TRIKE TOURING & TRIKE 321
Tour-Pak® Trim Tour-Pak® Trim
A. TOUR-PAK® HINGE AND LATCH KIT – GLOSS BLACK F. TOUR-PAK® LATCHES – GLOSS BLACK
Upgrade the appearance of your Tour-Pak® luggage. These Add a custom touch to your Tour-Pak® luggage. Styled to
Original Equipment-style hinges and latch are polished and complement available gloss black Premium Tour-Pak Hinges,
finished in rich gloss black. The complete kit includes hinges, these Original Equipment-style latches are polished and
latch and all necessary hardware. finished in rich gloss black. The complete kit includes latches,
53000343 hasps and all necessary hardware.
Fits ’14-later Touring and Tri Glide® models equipped with 53000130
Chopped or King Tour-Pak Luggage. Fits ’88-’13 Touring and Trike models equipped with Razor-
Pak, Chopped or King Tour-Pak Luggage.
B. PREMIUM TOUR-PAK LATCHES
Styled to complement the Premium Tour-Pak Hinges, these G. EZ TOUR-PAK LID CATCH
die-cast latches provide a bold look to your ride. Designed Add the convenience of a self-aligning Tour-Pak lid to your
to eliminate the traditional catch and clamp design, these Touring bike. Simply close the lid and latch it down. This easy-
latches make access to the Tour-Pak luggage easier than ever. to-install kit eliminates the need to shift the position of the lid
Simply press down on the top of the lid to secure the latching because the latches line up perfectly every time.
mechanism. The self-aligning design positions the lid perfectly A. TOUR-PAK HINGE AND LATCH KIT – GLOSS BLACK F. TOUR-PAK LATCHES – GLOSS BLACK 53000195
for no-fuss closure. A simple push of the button releases the Fits ’85-’13 Touring and Trike models equipped with King,
lock and pops the lid open for convenience. Latches feature Ultra or Razor-Pak Tour-Pak Luggage. Does not fit Chopped,
hidden hardware for a clean appearance and the front latch Leather or Sport Tour-Pak luggage.
wraps around the Original Equipment lock for a custom touch.
Kit includes front and rear latch and all mounting hardware. H. TOUR-PAK LOCK COVER
Fits ’06-’13 Touring and Trike models equipped with King or This elegant die-cast cover with a Bar & Shield logo adds a
Ultra Tour-Pak Luggage. Does not fit with Leather, Razor-Pak custom touch to your Tour-Pak lock. Simply use your thumb to
or Chopped Tour-Pak Luggage. Does not fit models equipped rotate the domed cover to expose the Original Equipment lock.
with Tour-Pak Lock Covers P/N 53000217 or 53000218. A detent holds the cover in the open position and provides
unhindered access for your key. Easy to install, the protective
53000252 Chrome. cover is held firmly in place by the Original Equipment lock and
53000253 Gloss Black. lock mounting hardware.
C. PREMIUM TOUR-PAK HINGES Fits ’88-’13 Touring and Trike models equipped with King,
Upgrade the appearance of your Tour-Pak luggage with billet- Razor-Pak or Chopped Tour-Pak Luggage. Does not fit with
style premium hinges. Styled to complement the Original Premium Tour-Pak Latches P/N 53000252 or 53000253.
Equipment Tour-Pak latches, these hinges add a clean, bold 53000217 Chrome.
look with no exposed hardware. Available in mirror chrome or 53000218 Gloss Black.
gloss black finish, the complete kit includes two hinges and
all necessary hardware. Drill is required to remove the factory I. RETRACTABLE TOUR-PAK LID TETHER
installed hinge mounting rivets. Add the convenience of a Retractable Tether to your Tour-
Fits ’88-’13 Touring and Trike models equipped with Razor-Pak, Pak luggage. When extended to its full length, the strong cord
Chopped or King Tour Pak luggage. holds the lid open at least 10° past vertical for improved stabil-
B. PREMIUM TOUR-PAK LATCHES – B. PREMIUM TOUR-PAK LATCHES – G. EZ TOUR-PAK LID CATCH ity and easy packing. Then the device automatically coils the
79211-08A Chrome. CHROME GLOSS BLACK tether cord inside the housing to eliminate pinched cords
53000131 Gloss Black. when closing the lid. The attractive housing with Bar & Shield
logo attaches to the existing mounting points and replaces the
D. TOUR-PAK® REAR LIGHT TRIM Original Equipment cord.
Add a custom touch to the Original Equipment Tour-Pak® 54171-11
carrier's rear lighting. This mirror chrome trim covers the satin Fits ’97-’13 Touring and Trike models equipped with a King,
black surface and adds a brilliant finishing touch to the rear of Ultra, Chopped or Razor-Pak Tour-Pak luggage. Will not fit
the bike. Self-adhesive mounting simplifies installation. Leather or Sport Tour-Pak luggage.
53000329
Fits ’14-later FLHT, FLHTCU, FLHTCUL, FLHTK, FLHTKL, J. RETRACTABLE TRUNK DOOR TETHER
FLTRK, FLTRU, FLHTCUTG and models equipped with Add the convenience of a Retractable Tether to your Trike trunk
accessory King Tour-Pak and LED wrap-around tail lamp. door. The tethers easily mount to your trunk door and replace
Does not fit with Accent Rail P/N 53000229.
TOURING
the stock support cords. When you open the trunk door, the
tether smoothly deploys from the housing to support the door
E. TOUR-PAK SIDE MARKER LIGHT TRIM in the full open position. Then as you close the door, the device
Add a custom touch to the Original Equipment Tour-Pak carri- automatically coils the tether cord inside the housing to elim-
er's side lighting. Mirror chrome trim surrounds the side inate pinched cords. The attractive housing with Bar & Shield
marker lights for a bit of flash and the self-adhesive backing logo attaches to the existing mounting points. Sold in pairs.
simplifies installation. Kit includes left and right side trim. 53000237
53000330 Fits ’11-later Tri Glide® models.
Fits ’14-later FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRK,
FLTRU and FLHTCUTG models with Original Equipment King
Tour-Pak-mounted side lights. Also fits ’14-later models C. PREMIUM TOUR-PAK HINGES – C. PREMIUM TOUR-PAK HINGES – H. TOUR-PAK LOCK COVER – CHROME H. TOUR-PAK LOCK COVER – GLOSS BLACK
equipped with accessory King Tour-Pak and Side Marker CHROME GLOSS BLACK
Light Kits P/N 54352-09 or 69494-06.
D. TOUR-PAK REAR LIGHT TRIM E. TOUR-PAK SIDE MARKER LIGHT TRIM I. RETRACTABLE TOUR-PAK LID TETHER J. RETRACTABLE TRUNK DOOR TETHER
322 TOURING & TRIKE TOURING & TRIKE 323
Saddlebag Trim Chassis Trim – Rear End
A. SADDLEBAG LATCH AND HINGE KIT – GLOSS BLACK E. FENDER SUPPORT KIT – GLOSS BLACK
Gloss Black Saddlebag Hinge Covers and finger-operated Manufactured from Original Equipment components to
Latches are an easy way to give your Touring bike a unique ensure superior fit and finish, the gloss black Fender Support
monochrome look. These latches add a dark custom touch to Kit replaces the Original Equipment cast and chrome fender
the motorcycles’s profile, and complement almost any paint support system and continues the dark look to the area
combination. Easy to install with Original Equipment hardware between and behind the saddlebags. The ideal finishing touch
and reflectors. for your blacked-out Touring bike, these covers are the perfect
90200914 Latch Lever and Hinge Cover Kit. complement to the optional gloss black Passenger Sissy
Fits ’14-later Touring models (except FLHXSE and FLTRXSE) Bars, Luggage Racks, Tour-Pak® mounting racks and Docking
equipped with hard saddlebags. Hardware Kits. Kit includes gloss black left and right supports
and docking hardware slot fillers.
90201052 Latch Lever only.
Fits ’14-later Touring models (except FLHXSE and FLTRXSE) 90201206
equipped with hard saddlebags. Fits ’14-later Touring models.
B. SADDLEBAG LATCH PLATE – VIVID BLACK F. FENDER STRUT COVERS – GLOSS BLACK
Saddlebag Latch Plates are an easy way to give your Touring E. FENDER SUPPORT KIT – GLOSS BLACK Manufactured from Original Equipment components to
bike a unique monochrome look. Available in Vivid Black, these ensure superior fit and finish, the gloss black Fender Strut
latches add a splash of color to the motorcycle profile. Easy to Covers conceal the cast fender struts and continue the dark
install with Original Equipment hardware. look to the area behind the saddlebags. The ideal finishing
touch for your blacked-out Touring bike, these covers are the
Fits ’93-’13 Touring models equipped with Color-Matched perfect complement to the optional gloss black Passenger
Hard Saddlebags. HDI models require separate purchase of Sissy Bars, Stealth Luggage Rack and Docking Hardware Kits.
Reflectors P/N 59289-92 and 59290-92. 47498-09
90853-06DH Right Side. A. SADDLEBAG LATCH AND HINGE KIT – A. SADDLEBAG LATCH AND HINGE KIT – Fits ’09-’13 Touring models (except models equipped with
90857-06DH Left Side. GLOSS BLACK GLOSS BLACK rigid-mounted Tour-Pak luggage).
C. BILLET SADDLEBAG HINGE COVER KIT – EDGE CUT G. SADDLEBAG FILLER STRIPS
Dress your saddlebags in style. Edge Cut Saddlebag Hinge For those who seek perfection, these kits fill in the gaps
Covers feature a rich black finish that is machined to expose between the fender and the rear of the saddlebags, hiding the
the highlights of raw aluminum. The contrasting cut-back saddlebag mounting bracket. Choose between primed, highly
look makes a powerful visual statement, and works great with polished chrome, or color-matched to your sheet metal and
both traditional and contemporary customizing styles. These bags for a truly custom look.
covers replace the Original Equipment covers, but retain the
Fits ’14-later Touring (except FLHRXS, FLHX, FLHXS, FLTRX,
stock hinges and locks for easy installation. Kit includes left
FLHXSE, FLTRXS and FLTRXSE) models with hard saddlebags.
and right covers, mounting hardware and saddlebag-mounted
Does not fit with accessory Saddlebag Guard Rails.
red reflectors.
90200873 Solid – Chrome.
90200915
Fits ’14-later Touring (except FLHRC) models equipped with 90200872DH Solid – Vivid Black.
hard saddlebags. HDI models require separate purchase of Fits ’95-’08 Electra Glide® (except FLHX), ’94-’08 Road King®
amber Reflector P/N 59289-92 and 59290-92. E. FENDER SUPPORT KIT – GLOSS BLACK F. FENDER STRUT COVERS – GLOSS BLACK
(except FLHRS and FLHRSE) and ’93 FLHS models equipped
with Nostalgic Saddlebag Guard Rails P/N 90839-94. Also fits
D. BILLET SADDLEBAG HINGE COVER KIT – CHROME ’98 FLHRCI with Nostalgic Saddlebag Guard Rails P/N 91265-
GROOVED 98. (Will not fit models equipped with Leather Saddlebags
This sweep of chrome will set the tone for a very special Touring P/N 90652-94A, 90843-93 or Fender Rail P/N 91019-92A.
custom. Manufactured from billet aluminum, this polished and Will not fit ’98-’08 FLHRCI with H-D® Detachables™ Docking
plated cover replaces the Original Equipment saddlebag hinge Kit or ’98-’08 FLTR.)
for a striking look. The grooved ball-milled design and curved
leading and trailing edge add a feeling of forward motion, even 45896-98 Slotted – Chrome.
while parked on Main Street. Kit includes chrome-plated
mounting hardware and red saddlebag-mounted reflectors. H. LOWER BELT GUARD COVER – CHROME
Dress your lower belt guard in chrome. This polished and
90201084 chrome-plated metal guard is formed to fit over the Original
Fits ’14-later Touring (except FLHRC) models equipped with Equipment belt guard for easy installation.
TOURING
hard saddlebags. HDI models require separate purchase of
amber Reflector P/N 59289-92 and 59290-92. 60408-09
Fits ’07-later Touring models.
A. SADDLEBAG LATCH AND HINGE KIT – B. SADDLEBAG LATCH PLATE – VIVID BLACK
GLOSS BLACK
C. BILLET SADDLEBAG HINGE COVER KIT – D. BILLET SADDLEBAG HINGE COVER KIT – G. SADDLEBAG FILLER STRIPS – H. LOWER BELT GUARD COVER – CHROME
EDGE CUT CHROME GROOVED CHROME, SLOTTED ’95-’08 MODELS
(90200915 SHOWN) (90201084 SHOWN)
324 TOURING & TRIKE TOURING & TRIKE 325
Tour-Pak® & Saddlebag Lighting Tour-Pak® & Saddlebag Lighting
A. TOUR-PAK® SPOILER KIT SIGNATURE LED REAR LIGHTING
The combination of contoured styling and the practicality of an Signature LED Rear Lighting delivers modern style and func-
integrated auxiliary LED running/brake light blend form and tion that improves rider conspicuity to surrounding traffic. The
function into the Tour-Pak® Spoiler. light pipe around the perimeter diffuses light and is always
illuminated as a running light for eye-catching visibility. LED
Fits ’14-later Touring models equipped with King or Chopped Brake and Turn lights exceed the output of Original Equipment
Tour-Pak luggage. Installation requires separate purchase of rear lighting. These lamps offer easy plug-and-play installation
Tour-Pak Lid Spoiler Light Kit P/N 53000238 or 53000239. that requires no wiring splicing.
57200086BDK Primed.
57200086DH Vivid Black. D. SIGNATURE LED SADDLEBAG RUN/BRAKE/
TURN LAMP
Also available Add functional lighting to the rear of your Touring bike with
LED LIGHT KIT – TOUR-PAK SPOILERS these run/brake/turn lights. Lamps may act as a supplement
Custom fit to Tour-Pak Spoilers, these fast-acting LED Light to the Tour-Pak® luggage carrier mounted rear lighting, and
Kits operate as a supplemental rear running light and brake also permit the removal of the Tour-Pak® luggage carrier with
light. The high mounting position places the light in the line-of- a Detachable Mounting Kit.
sight of following vehicles, and the bright, fast-acting red LED D. SIGNATURE LED SADDLEBAG RUN/BRAKE/TURN LAMP
Fits ’14-later Touring models equipped with standard or
lamps get you noticed. Wiring is concealed for a clean, custom
stretched saddlebags.
installation. Available with red or smoked lens.
67801023 Red Lens.
Fits ’14-later Touring models and ’14-later Tri Glide® models 67801024 Smoked Lens.
equipped with Tour-Pak Spoiler Kit. FLHT, FLHX, FLHXS,
FLHXST, FLTRX, FLTRK, FLTRXS and FLTRXST models will
E. SIGNATURE LED KING TOUR-PAK® LUGGAGE CARRIER
require separate purchase of Wiring Harness P/N 69201157.
RUN/BRAKE/TURN LAMP KIT
Does not fit HDI models. A. TOUR-PAK SPOILER KIT – B. SADDLEBAG LID SPOILER KIT –
Sequential turn signal elements sweep outward from the
53000238 Red Lens. (SHOWN WITH LED LIGHT KIT) (SHOWN WITH LED LIGHT KIT)
center to grab the attention of other motorists and make the
53000239 Smoked Lens. motorcycle more conspicuous. Offered with Smoked or Red
lenses.
B. SADDLEBAG LID SPOILER KIT
Fits ’14-later Touring and Trike models equipped with King
Aero styling and a practical addition to rear visibility. Color-
Tour-Pak® luggage carrier.
Matched Saddlebag Lid Spoilers equipped with bright fast-
acting LED lamps that will get you noticed. 67801129 Red Lens.
67801128 Smoked Lens.
Fits ’14-later Touring models with hard saddlebags. Installation
requires separate purchase of Saddlebag Lid Spoiler Light Kit
F. SIGNATURE LED TOUR-PAK SIDE MARKER LIGHT KIT
P/N 90200735 or 90200736.
Replaces Original Equipment King Tour-Pak side marker lights
57200087BDK Primed. with brilliant LED elements to complement LED Signature
57200087DH Vivid Black. lighting to the rear of the motorcycle. Offered with Smoked
or Red lenses.
Also available E. SIGNATURE LED KING TOUR-PAK® LUGGAGE CARRIER RUN/BRAKE/TURN LAMP KIT –
LED LIGHT KIT – SADDLEBAG SPOILERS Fits ’14-later Touring and Trike models equipped with King
RED LENS
Custom fit to Saddlebag Lid Spoilers, these fast-acting LED Tour-Pak® luggage carrier.
Light Kits operate as a supplemental rear running light, brake 68000312 Red Lens.
light and turn signals. The bright, fast-acting red LED lamps 68000313 Smoked Lens.
get you noticed and the mounting position places the light
above the traditional rear fender-mounted lamps and closer
to the line-of-sight of following vehicles. Wiring is concealed for
a clean, custom installation. Available with red or smoked lens.
Fits ’14-later Touring models equipped with Saddlebag Spoiler
Kit (sold in pairs).
90200735 Red Lens.
90200736 Smoked Lens.
TOURING
C. SIGNATURE LED RUN/BRAKE/TURN LAMP
Nestled in the fender strut opening, these Keystone LED lamps C. SIGNATURE LED RUN/BRAKE/TURN LAMP
add stylish and practical lighting to the rear of the bike. When
the bike is parked, the dark lamps fill the gap between the
fender and saddlebags for a clean, uncluttered look. Lamps
are mounted in a sealed housing that slips into the opening
and are held in place with the saddlebag support hardware
and an adhesive pad.
Fits ’14-later FLHR, FLHTCU, FLHTCUL, FLHTK, FLHTKL, and E. SIGNATURE LED KING TOUR-PAK® LUGGAGE CARRIER RUN/BRAKE/TURN LAMP KIT –
FLTRU models. SMOKED LENS
67801080 Red Lens.
67801082 Smoked Lens.
*WARNING: Disconnecting your DOT-required tail, *WARNING: Disconnecting your DOT-required tail,
brake and turn signal lighting could reduce your visibil- brake and turn signal lighting could reduce your visibil-
ity to others and result in death or serious injury. ity to others and result in death or serious injury.
C. KEYSTONE AUXILIARY LED RUN/BRAKE/TURN LAMP F. SIGNATURE LED TOUR-PAK SIDE MARKER LIGHT KIT
326 TOURING & TRIKE TOURING & TRIKE 327
Rear Lighting Rear Lighting
A. LIGHT BAR WITH LED BULLET TURN SIGNALS* E. CURVED LICENSE PLATE FRAME WITH LED LIGHTING*
These Turn Signals feature fast-acting, extra-bright LEDs set in Dress up the rear of your Street Glide® or Road Glide® model
compact bullet-shaped die-cast housings. Available with red and add practical auxiliary lighting at the same time. Designed
or smoked lenses, these lamps glow a bright red color when to replace the Original Equipment black license plate bracket,
functioning as brake lamps, running lights and directional this curved license plate frame is shaped to hug the contours
indicators. The kit includes the Rear Light Bar with integrated of the rear fender. The mount attaches to the underside of
down-lighting for the license plate, bullet lamp housings and the rear turn signal bar, and the smooth license plate frame
wiring. Installation does not require installation of a control with signature Harley-Davidson script appears to float above
box or load equalizer and the turn signals attach directly to the fender for a custom look. The frame features two verti-
existing wiring without cutting or splicing. These LED signals cal LED halo lights that glow while in the run mode and burn
are the perfect match for the available LED Front Turn Signals. brightly when the brakes are applied. Kit includes all neces-
Meets DOT requirements. sary harnesses and connectors to enable complete installa-
tion – no drilling or wire splicing is required. Available in your
Fits ’17-later FLHRXS and ’14-later FLHT, FLHX, FLHXS, FLTRX, choice of chrome or gloss black finish.
and FLTRXS models with Original Equipment rear bullet stop/
turn/tail light bar. Fits ’10-later FLHRXS, FLHX, FLHXS, FLHXST, FLTRX, FLTRXS
67800493 Black – Red Lens. E. CURVED LICENSE PLATE FRAME WITH LED E. CURVED LICENSE PLATE FRAME WITH LED and FLTRXST models.
67800494 Black – Smoked Lens.
LIGHTING – CHROME LIGHTING – GLOSS BLACK 67900275 Chrome.
67800491 Chrome – Red Lens. 67900273 Gloss Black.
67800492 Chrome – Smoked Lens.
F. CURVED LICENSE PLATE FRAME – TOURING
Love the look of your bike but hate the appearance of your
B. BULLET REAR LIGHT BAR – GLOSS BLACK*
state-mandated license plate? This stylish Curved License
Complete the blacked-out treatment of your custom Touring
Plate Frame is shaped to hug the contour of the rear fender.
bike. This complete kit replaces the Original Equipment A. LIGHT BAR WITH LED BULLET TURN SIGNALS – Designed to replace the Original Equipment black license
chrome bar and lamps with a sinister black edition for a BLACK WITH SMOKED LENSES plate bracket, installation requires no drilling or rewiring. The
minimalistic look. The kit includes the Rear Light Bar with
front frame cover conceals the plate’s mounting holes and
integrated down-lighting for the license plate, bullet lamp
raw edges and the curved shape hides the unfinished rear
housings and wiring.
side of the plate. Available in chrome or gloss black finish, the
Fits ’10-later Street Glide®, ’10-later Road Glide®, ’17-later complete kit includes all required mounting hardware.
FLHRXS and ’19-later FLHT models with Original Equipment
Fits ’10-later FLHRXS, FLHX, FLHXS, FLHXST, FLTRX, FLTRXS
rear bullet turn signal light bar.
and FLTRXST models.
67800483 Domestic.
67900008 Chrome.
67800484 International.
67900058 Gloss Black.
C. TRI-BAR LIGHT UPGRADE – AUXILIARY RUNNING Fits ’09 FLHR, FLHT and FLTR and ’06-’08 FLHX models.
LIGHT/BRAKE LIGHT* 67900056 Chrome.
Upgrade the Original Equipment Tri-Bar fender light from a
single-mode running light to a dual-mode running and brake
F. CURVED LICENSE PLATE FRAME – F. CURVED LICENSE PLATE FRAME – G. TOUR-PAK® LUGGAGE AND SADDLEBAG
light. The three smoked light bands glow red in the running
TOURING, CHROME TOURING, GLOSS BLACK INTERIOR LIGHT KIT
mode and increase in intensity when the brakes are applied.
Don’t be left in the dark. This bright convenience lamp kit turns
68358-07A nighttime into day when you open your Tour-Pak® luggage or
Fits ’06-’09 FLHX models. saddlebag. A brilliant white LED light pod mounts inside the
67774-10 Tour-Pak luggage to illuminate the interior and the two avail-
Fits ’10-later FLHX and FLTRX models (except HDI models). able LED light pods mount to the bottom of the Tour-Pak
luggage to cast light inside the open saddlebags. Each LED
D. REAR FENDER TIP LIGHT – AUXILIARY RUNNING light pod features a soft-touch micro switch for ease of activa-
LIGHT/BRAKE LIGHT* tion and a 5-minute auto shutoff timer to prevent battery drain.
Upgrade your Touring model’s Original Equipment fender tip 3-Light Tour-Pak & Saddlebag Light Kit
light from a single-mode running light to a dual-mode running
68000151
and brake light. The brilliant lamp glows red in the running
Fits ’14-later Touring models equipped with rigid or
mode and increases in intensity when the brakes are applied.
detachable King Tour-Pak Luggage.
The available smoked or red lenses complement any styling
direction. Easy plug-in connection to the Original Equipment 1-Light Tour-Pak Light Kit
wiring harness. 68000152
A. LIGHT BAR WITH LED BULLET TURN B. BULLET REAR LIGHT BAR – GLOSS BLACK
59685-10 Red Lens. SIGNALS – CHROME WITH RED LENSES Fits ’14-later Touring models equipped with rigid or
Fits ’09-’16 FLHTC, FLHTCU, FLHTCUL, FLHTK, FLHTKL and detachable King Tour-Pak Luggage.
’16 FLTRU models.
H. TRUNK INTERIOR LIGHT KIT
Don’t be left in the dark. This bright convenience lamp kit
turns nighttime into day when you open your Trike’s trunk. Two
brilliant white LED light pods mount inside the trunk to illu-
G. TOUR-PAK LUGGAGE AND SADDLEBAG INTERIOR LIGHT KIT – ’14-LATER MODELS minate the interior and the included contact switch turns the
light on and off when you open and close the door. A 5-minute
auto shut-off timer prevents battery drain. Kit includes wiring
harness and installation hardware.
83946-11 Fits ’09-later FLHTCUTG models.
*WARNING: Disconnecting your DOT-required tail, *WARNING: Disconnecting your DOT-required tail,
brake and turn signal lighting could reduce your visibil- brake and turn signal lighting could reduce your visibil-
ity to others and result in death or serious injury. ity to others and result in death or serious injury.
C. TRI-BAR LIGHT UPGRADE – AUXILIARY D. REAR FENDER TIP LIGHT – AUXILIARY G. TOUR-PAK LUGGAGE AND SADDLEBAG H. TRUNK INTERIOR LIGHT KIT
RUNNING LIGHT/BRAKE LIGHT RUNNING LIGHT/BRAKE LIGHT INTERIOR LIGHT KIT (68000151 SHOWN)
328 TOURING & TRIKE TOURING & TRIKE 329
Electrical Accessories Electrical Accessories
A. AUXILIARY POWER PORT – HANDLEBAR MOUNT C. USB CHARGING ADAPTOR
Power your cell phone, GPS, portable music player or tire infla- Charge your cell phone, MP3 players and other hand-held
tor from this handy 12-volt power port. The elegant cast hous- devices while on the road. Compact Adaptor plugs into stan-
ing features a conventional style power outlet that accepts dard or accessory 12-volt power ports, and provides a stan-
most 12V automotive power adapter plugs and a pop-top dard USB-style outlet that accepts many phone and music
cover to protect the port while not in use. player power cords.
Fits ’15-’20 XG, ’14-later XL, ’12-’17 Dyna®, ’11-later Softail® 69200357
(except FXDRS, and FXFB and FXFBS models with stock For use with Original Equipment or accessory 12V Auxiliary
tapered bars), ’14-later Road King®, and models with Power Port. Does not fit Electric Vehicles.
either 1" or 7/8" diameter handlebars. ’17-later Road King®
requires separate purchase of Electrical Connection Kit AUXILIARY POWER PORTS
P/N 69201599A. ’18-later Softail® models require seperate Power your cell phone, GPS, portable music player or tire infla-
purchase or Electrical Connection Kit P/N 69201750. tor from this handy 12-volt power port. The conventional style
power outlet accepts most 12V automotive power adapter
69200971 Chrome. plugs, and features a pop-top cover to protect the port while
69200970 Black. not in use.
Fits ’12-’17 Dyna, ’11-later Softail (except FXDRS, and FXFB and
FXFBS models with stock tapered bars), and ’14-later Road D. AUXILIARY POWER PORT – TOUR-PAK® MOUNT
King models with 1-1/4" diameter handlebars. ’17-later Road Easy-access power port mounts to the wall of the Tour-Pak®
King requires separate purchase of Electrical Connection Kit luggage, allowing you to recharge music players and cell
P/N 69201599A. ’18-later Softail models require separate phones in a secure locked location.
purchase of Electrical Connection Kit P/N 69201750. 69200826
69200855 Chrome. Fits ’14-later FLHTCU, FLHTCUL and FLHTCUTG models.
A. AUXILIARY POWER PORT – HANDLEBAR MOUNT, CHROME C. USB CHARGING ADAPTOR Original Equipment on FLHTK, FLHTKL, FLTRK, and
69200854 Black.
FLHTCUTGSE models.
B. CIGARETTE LIGHTER AND SOCKET KIT 91671-10
Need a light? This complete kit is designed as a direct replace- Fits ’06-’13 FLHTC and FLTRU, ’96-’13 FLHTCU and ’09-’13
ment for stock fairing mounted 12V accessory outlet. Kit FLHTCUTG models. Also fits ’06-’13 Touring models with
includes heat-resistant fairing mounted receptacle, short accessory King Tour-Pak luggage and ’98-’13 Touring models
knob pop out lighter with weather skirt and wire connectors. with Tour-Pak mounted rear speaker pods. Not for use with
Not intended to be used as an accessory power outlet. Accessory Fitted Liners or Premier Liner.
69200605 E. AUXILIARY POWER PORT – SADDLEBAG MOUNT
Fits ’14-later Touring and Tri Glide® models equipped with This convenient power port mounts to the inside wall of the
fairing mounted 12V accessory outlet. saddlebag, allowing you to charge cell phones and music play-
ers in an out-of-sight location. Power port features a quick-
disconnect plug for use with detachable saddlebags.
69200091
Fits models equipped with 12-volt battery (except FXDRS,
VRSC™, XG models, or with Throw-Over or Swingarm Bags).
Not for use with accessory Fitted Liners or Premier Liner.
Requires separate purchase of Battery Charging Harness
P/N 94624-97B, if not already equipped.
TOURING
A. AUXILIARY POWER PORT – HANDLEBAR MOUNT, BLACK D. AUXILIARY POWER PORT – TOUR-PAK MOUNT
B. CIGARETTE LIGHTER AND SOCKET KIT E. AUXILIARY POWER PORT – SADDLEBAG MOUNT
330 TOURING & TRIKE TOURING & TRIKE 331
Electrical Accessories Electrical Accessories
A. AUXILIARY POWER SWITCH KIT – FAIRING MOUNT D. 54-AMP HIGH OUTPUT CHARGING SYSTEM
Styled to match the Original Equipment fairing dash panel The Harley-Davidson® High Output Charging System is engi-
switches. These Auxiliary Power switches allow you to control neered to provide 30% more power than the stock system at
additional fog lamps, auxiliary lighting, heated gear or elec- idle. With 54 amps of output at 4000 rpm, accessories will
trical accessories with the touch of a finger. Kit includes two operate at their peak performance – no more dimming lights,
auxiliary switches, wire harnesses and installation hardware. reduced audio performance or under-performing heated gear.
71400129 This is a recommended installation anytime a multi-amp audio
Fits ’17-later Electra Glide®, Street Glide®, Road Glide®, Ultra system is installed on the vehicle in order to achieve the full
Limited and Tri Glide® models. Does not fit CVO™ models. capability of your audio system. It is also recommended when
installing heated seats, heated gear and other higher-draw
71400106
powered accessories.
Fits ’14-’16 Electra Glide, Ultra Limited, Road Glide Ultra and
Tri Glide models. Stock on select CVO™ Touring models, the complete kit
71400105 includes high performance rotor, stator, voltage regulator and
Fits ’14-’16 Road Glide, Street Glide and Ultra Limited models. all gaskets and hardware required for installation.
Includes dash switch assembly mount. 29900028A
A. AUXILIARY POWER SWITCH KIT – FAIRING MOUNT (71400129 SHOWN) Fits ’11-’16 Touring, ’10-’16 CVO Touring and ’09-’16 Trike
B. ELECTRICAL CONNECTION UPDATE KIT – TOURING models. Stock on ’14-’16 FLHTKSE, FLHXSE and FLTRUSE.
Harness plugs into accessory connector to provide 12-volt
power leads. Required to install Heated Grips, XM Radio, E. 45-AMP CHARGING SYSTEM FOR ELECTRA GLIDE®
Cruiser Amp & Speaker Systems, zūmo® GPS, Digital Oil MODELS
Pressure Gauge, Garage Door Opener Kits, Heated Seats, Standard equipment on H-D® Touring-style Police motorcy-
decorative lighting or other electrical accessories. cles, this high-output charging system knows how to work
69201599A for a living. Add more electronics – including lights – on your
Fits ’18-later Softail® models and ’17-later Touring and Trike Electra Glide® model without worrying about whether you’ve
as a mid-bike connector (near the seat). got the juice to back it up.
69200722 29999-97B Fits ’99-’05 FLHT models.
Fits ’14-’16 Touring and Trike models.
Also available: (not shown)
C. SWITCHED CIRCUIT ADAPTER HARNESS 32-AMP HIGH-OUTPUT ALTERNATOR KIT
This harness allows two accessories to be connected to the Stock on all ’89-later carbureted 1340 models. 50% increase
switched accessory circuit featured on ’94-later Touring in amperage for the heavily accessorized motorcycle.
models. You then may switch two accessories on or off simul- 29985-87
taneously as required. Fits ’84-’88 FLT, FLHT, and FXR (wet clutch) models. (Will not
70264-94A fit ’84-’88 Softail®.) Stock on all ’89-’95 and some ’96-’97
Fits ’94-later Touring and Trike models. Required on ’14-later Evolution® 1340-equipped models.
Touring and Trike models when connecting multiple powered
accessories using Electrical Connection Kit P/N 69200722, F. VOLTAGE REGULATOR – CHROME
71400129, or 69201599A. Original Equipment voltage regulators with a sparkling triple-
69201706 A. AUXILIARY POWER SWITCH KIT – FAIRING MOUNT (71400105 SHOWN) D. 54-AMP HIGH OUTPUT CHARGING SYSTEM plated chrome finish. Hand-buffed, then copper-, nickel- and
Fits ’18-later Softail models and ’17-later Touring and Trike chrome-plated, these brilliant chrome-plated regulators are
models. Required when connecting the CoolFlow™ Fan and the perfect highlight for any Harley-Davidson® motorcycle.
another powered accessory using Electrical Connection Kit 74622-09
P/N 69201599A. Fits ’09-’16 Touring and Trike models (except ’14-later
FLHRSE and FLHTKSE and ’15-later FLHXSE and FLTRUSE).
Also available:
74622-06 Fits ’06-’08 Touring models.
ELECTRICAL ACCESSORY ADAPTER
Harness accommodates the addition of multiple electrical 74622-04 Fits ’04-’05 Touring models.
accessories to the main battery power circuit on specified
models.
70270-04A
Fits ’07-’17 VRSC™, ’04-’13 XL and XR, ’04-’11 Dyna®,
’04-’10 Softail and ’04-’13 Touring models. Also fits ’14-later
TOURING
Touring and Trike models when equipped with a third or
fourth pair of Boom!™ Audio Stage II speakers.
B. ELECTRICAL CONNECTION UPDATE KIT – B. ELECTRICAL CONNECTION UPDATE KIT – E. 45-AMP CHARGING SYSTEM FOR ELECTRA GLIDE MODELS
TOURING (69201599A SHOWN) TOURING (69200722 SHOWN)
70270-04A
70264-94A
TOURING
backed vinyl material and features a Bar & Shield logo. It is
tive yet functional look. The inset LED light bar glows as designed for easy installation and a custom fit.
a running lamp when the ignition is on and functions as an
auxiliary red lamp when the brakes are applied. Available with 57000307
smoked or red LED lens to match your customizing direction. Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and
Can be installed on models equipped with Trunk Guard. Tri Glide® models.
68000129 Red Lens. 57800-00
Fits ’14-later Tri Glide models. Does not fit CVO Tri Glide Fits ’96-’13 Electra Glide, Street Glide and Trike models.
models. Will not fit with Exhaust Trim P/N 83843-09. Requires separate purchase of Chrome Windshield
Trim P/N 59213-96.
E. TRUNK GUARD – TRI GLIDE E. TRUNK GUARD – FREEWHEELER F. TRANSPARENT PAINT GUARD KIT F. TRANSPARENT PAINT GUARD KIT
(83989-10A SHOWN) (11100125 SHOWN)
F. ILLUMINATED FASCIA ACCENT TRIM – RED LENS G. FAIRING BRA – BAT WING FAIRING G. FAIRING BRA – BAT WING FAIRING
(57000307 SHOWN) (57800-00 SHOWN)
SCREAMIN’ EAGLE ®
MOVE MORE AIR & FUEL GIVE IT A LIFT PUMP UP THE VOLUME TOP IT OFF
AN OVERVIEW OF WARRANTY & CAUTION: Harley-Davidson has the engineering CAUTION ICONS CALIFORNIA: These Screamin’ Eagle® products are street compliant for sale and use on DYNAMOMETER (DYNO) PERFORMANCE TESTING: Declared performance values in
expertise, sophisticated dyno lab and complete testing facilities to provide enthusiasts GO LIGHT: These Screamin’ Eagle® products are 50-State U.S. EPA compliant for sale and use pollution-controlled vehicles in the state of California. this catalog represent SAE J-1349 transient peak power output. Dynamometer settings, motorcycle
with a line of performance products designed to produce good, solid, reliable horsepower on all applicable vehicles, including those that are pollution controlled. See Genuine Motor condition, variation, climate and other factors can affect performance output, and results can vary
and torque. Engine-related performance parts are intended for the experienced rider only. Parts and Accessories or Screamin’ Eagle Accessories catalog for fitment information. CROSS FLAGS: This product may be intended for race use only applications. It may also from the performance values declared by Harley-Davidson.
Screamin’ Eagle Performance products are intended for the experienced rider only. be certified for use in a 50-State U.S. EPA compliant application or kit. Use of any incomplete Street-legal and/or street-compliant statements refer to product meeting 50-state emissions and
WARRANTY: Installation of Screamin’ Eagle® products and similar off-road or competition combination of certified kit products may not be legal for sale or use on U.S. market pollution- noise standards in the United States. The street legal and/or street compliant statements may not
products from other manufacturers, except some street-compliant offerings installed by STOP HAND: Harley-Davidson® motorcycles modified with some Screamin’ Eagle® Performance controlled vehicles and may be restricted to closed course competition use. See Genuine Motor apply to markets outside of the United States.
authorized Harley® dealers, may void your H-D® limited vehicle warranty. Installation of products must not be used on public roads and, in some cases, may be restricted to closed-course Parts and Accessories or Screamin’ Eagle® Accessories catalog for compliance, fitment and
a California performance kit on a 49-state model motorcycle or 49-state performance competition. These performance parts are 49-state U.S. EPA compliant but are NOT compliant for Not all products are available in all countries — please consult your dealer for details.
warranty information. Screamin’ Eagle® Performance products are intended for the
kit onto a California model motorcycle will void the manufacturer’s warranty, as it will not sale or use in California on pollution-controlled motor vehicles. California guidelines on tampering can experienced rider only. Stage upgrades retain the Motorcycle Original Equipment Manufacturer’s Warranty.
result in a street-compliant configuration. also lead to substantial fines and penalties. Screamin’ Eagle® Performance products are intended for
the experienced rider only. *Dynamometer settings, motorcycle condition, variation, climate and other factors
CAUTION: Harley-Davidson® motorcycles modified with some Screamin’ Eagle® can affect performance output, and results can vary from the performance values
high-performance engine parts must not be used on public roads and, in some declared by Harley-Davidson.
cases, may be restricted to closed-course competition.
338 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 339
FIRST THINGS FIRST: Next, the motorcycle Engine Control Module (ECM) Tuning adjusts the air-fuel ratio and other parameters The end result? A properly tuned performance machine
2 needs to be recalibrated. Screamin’ Eagle offers base 3 based on your performance upgrades. 4 that gets the most out of your performance upgrades.
You’ve built your dream pavement-pounding machine by selecting
one of the Screamin’ Eagle® Stage upgrades. calibrations specifically designed for the performance
components on your bike.
RICH
Horsepower
AIR
Torque
FUEL
LEAN
TTQ
STAGE I STAGE II STAGE III STAGE IV HHP
MAXIMUM PERFORMANCE
PRO STREET TUNER* COMPLETE MOTORCYCLE OPERATING RANGE MANUAL ADJUSTMENT FOR
Maximum Performance + Optimal Efficiency
• Offers base calibrations for your chosen
Throttle Position (%) for your bike
Screamin’ Eagle Stage upgrade PART-THROTTLE CRUISING RANGE
1 Load base calibration FULL-THROTTLE ACCELERATION
• Constantly monitors the engine operation in the
RANGE
SCREAMIN’ EAGLE
software, whether you are new to tuning or an experienced user. Available for VRSC™ and XR models No 41000445
• Smart Tune Live – a dynamic and visual method to track and capture engine Fits ’14-later XL, ’16-’17 Dyna® FXDLS, ’16-’20 Softail®, ’14-’20
data simply by running the vehicle through a range of RPM and throttle posi- Language Support English, Spanish, German, Touring and ’17-’20 Trike models. Installation requires exhaust
tions. This feature reduces the time to modify existing VE (Volumetric Efficiency) French, Japanese, Italian, modification to incorporate wide-band oxygen sensors.
tables, which are then analyzed and tuned. Smart Tune Live works on models with Portuguese, Dutch Some models require Oxygen Sensor Harness Extension. For
factory-installed O2 sensors only. model specific installation requirements see Installation
Also available: Instructions on H-D.com/shop. All models require ECM
• Adjustability to Spark Advance, Throttle Progressivity and Volumetric Efficiency to
custom tune the performance combination.
SCREAMIN’ EAGLE TUNER CABLE KIT 2 calibration with Screamin’ Eagle® Pro Street Tuner for proper
Cable kit provides all necessary connections between motorcycle, VCI and computer, installation. 50-State U.S. EPA Compliant.
• 50-State U.S. EPA compliant. and permits downloading calibrations with the Street Tuner and Super Tuner software.
Kit includes two cables: computer USB to VCI box and VCI box to vehicle. Also available: (not shown)
The Pro Street Tuner permits tunability to optimize performance and drivability OXYGEN SENSOR HARNESS EXTENSION
without compromising fuel efficiency, emission levels, engine durability, or 50-State 32184-08A
For use with ’01-’17 VRSC™, ’01-’13 EFI XL and XR, ’01-’11 EFI Dyna, ’01-’11 EFI Plug-in extension cable is wired to allow installation of the
U.S. EPA compliance. And unlike other race tuners or engine controllers, the Screamin’ Eagle Smart Tune PRO Automatic Tuning Module
Screamin’ Eagle Pro Street Tuner does not impact your Harley-Davidson® factory Softail, ’02-’13 EFI Touring and ’09-’13 Trike models. Also for use with VRXSE
Destroyer race bikes. hardware on specific models. No splicing or soldering is
warranty coverage. required.
41000008C 41000018
For use with ’15-’20 XG, ’14-later XL, ’12-’17 Dyna, ’11-’20 Softail, ’14-’20 Touring and 69201704
For use with ’17-’20 XG, ’14-later XL and ’07-’17 Dyna®, and ’07-later Softail and Touring Required for use of Screamin’ Eagle Smart Tune PRO
and ’17-later Trike models. Requires separate purchase of model-specific Tuner Cable. ’14-’20 Trike models. Screamin’ Eagle performance upgrades for FLSB are 49-state
U.S. EPA approved. Pending approval for use in California. Automatic Tuning Module hardware on, ’16-’17 Dyna and
Pending approval for use in California on ’21 -later models. Refer to H-D.com/shop for Softail models.
status. 41000979
For use with ’21-later Touring, Trike, Softail®,and CVO™ models. Does not work with
Sportster or Street models. 2
Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. A. SCREAMIN’ EAGLE SMART TUNE PRO AUTOMATIC TUNING MODULE
The street legal and/or street compliant statements may not apply to markets outside of the United States.
Tuning parameters may not be available in all markets. Check your local dealership for more information.
342 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 343
Milwaukee-Eight® Stage Upgrades Milwaukee-Eight® Stage Upgrades
STAGE II
®
MILWAUKEE-EIGHT POWERTRAIN STAGE I + CAM UPGRADE
Screamin’ Eagle® Stage upgrades offer complete street-compliant performance configurations Adding performance cams to a Stage I equipped bike is the next step to improved
performance. Cam choices allow you to tailor the engine’s performance to your specific
engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and needs. A torque cam offers on-demand throttle response from low- to mid-RPM at
trial-and-error testing normally associated with engine modifications, Stage upgrades include cruising speed. A power cam targets high-RPM, wide-open throttle response that keeps
everything you need to enhance your bike’s performance. Start with the foundation, the Stage I pulling right up to the redline. ECM calibration tuning is required to accommodate the
increased valve timing, and performance valve springs may be required for high-lift cams.
upgrade, then choose from Stage ll, lll or lV depending on your performance goals, budget
and riding style.
Stage II upgrade requires minor engine disassembly
to replace the cam. Adjustable pushrods allow
cam installation without removing the rocker box.
Special tools and ECM tuning are required.
STAGE III
STAGE I STAGE IV
INTAKE + EXHAUST + TUNING STAGE I + CAM, BIG BORE CYLINDERS, PISTONS, CYLINDER HEADS
SCREAMIN’ EAGLE
The easiest and most cost effective step to improve your motorcycle’s performance & THROTTLE BODY
is to increase the airflow into and out of the engine. A high-flow air cleaner and Stage I upgrade can be installed without engine To maximize the impact of the increased displacement gained with Stage III updates,
system-matched slip-on mufflers provide horsepower and torque improvements disassembly. No special tools are required. Requires the addition of free-flowing ported cylinder heads and a big bore throttle body top off
you can feel throughout the RPM range, and serve as the core components for ECM tuning.
the performance build. Designed to satisfy the high-RPM, throttle-twisting rider, the
all performance upgrades. ECM calibration is required to tune the fuel flow and Stage IV update delivers 20-30% increase in power that keeps pulling right up to the
timing required to accommodate the improved airflow. redline, without sacrificing mid-range torque. ECM calibration tuning is required to
add more fuel, and a higher-lift cam may be required to deliver maximum power.
Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States.
The street legal and/or street compliant statements may not apply to markets outside of the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.
344 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 345
Milwaukee-Eight® Stage Upgrades Milwaukee-Eight® Stage Upgrades
110 110
100 100
SOFTAIL® 107CI MODEL STAGE UPGRADES 90 90
80 80
70 70
Milwaukee-Eight® 107 Softail® Stage Kits – Milwaukee-Eight 107 Softail Stage Kits –
Horsepower Comparisons Torque Comparisons 60 60
Stock 107 TQ
130 130 50 50
Stock 107 HP
40 107-119 Stage III TQ 40
120 120 107-119 Stage III HP
30 107-128 Stage lV w/ Street Cannons TQ 30
Corrected Rear Wheel Horsepower (hp)
60 60
Stock 107 TQ
50 50
Stock 107 HP
40 114-122 Stage III TQ 40
114-122 Stage III HP
SOFTAIL 114CI MODEL STAGE UPGRADES 30 114-131 Stage lV w/ Street Cannons TQ 30
114-131 Stage IV w/ Street Cannons HP
Milwaukee-Eight 114 Softail Stage Kits – Milwaukee-Eight 114 Softail Stage Kits – 20 20
Horsepower Comparisons Torque Comparisons 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
150 150 Engine Speed (rpm x 1000)
SCREAMIN’ EAGLE
Corrected Rear Wheel Torque (lb-ft)
70 70 70
70
60 60
60 60
Stock 114CI (Ventilator A/C) Stock 114CI (Ventilator A/C) 50 Stock 117CI 50 Stock 117CI
50 Stage II 114CI – HP Cam, Extreme A/C, Street Cannons 50 Stage II 114CI – HP Cam, Extreme A/C, Street Cannons
40
Stage II 117CI – HP Cam, Ventilator A/C, Street Cannons
40
Stage II 117CI – HP Cam, Ventilator A/C, Street Cannons
Stage II 114CI – TQ Cam, Ventilator A/C, Street Cannons Stage II 114CI – TQ Cam, Ventilator A/C, Street Cannons Stage III 117CI – Heavy Breather A/C, Street Cannons Stage III 117CI – Heavy Breather A/C, Street Cannons
40 Stage III 114 to 122CI – Street Cannons 40 Stage III 114 to 122CI – Street Cannons 30 Stage IV 117CI – Ventilator A/C, High-Flow Exhaust 30 Stage IV 117CI – Ventilator A/C, High-Flow Exhaust
Stage IV 114 to 131CI – Heavy Breather, High-Flow Stage IV 114 to 131CI – Heavy Breather, High-Flow
20 20
30 30
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
20 20 Engine Speed (rpm x 1000) Engine Speed (rpm x 1000)
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) DYNAMOMETER (DYNO) PERFORMANCE TESTING: Declared performance values in this catalog represent SAE J-1349 transient peak power output.
Dynamometer settings, motorcycle condition, variation, climate and other factors can affect performance output and results can vary from the
performance values declared by Harley-Davidson.
Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States.
The street legal and/or street compliant statements may not apply to markets outside of the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.
346 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 347
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN’ EAGLE® HEAVY BREATHER 2 B. SCREAMIN’ EAGLE® HEAVY BREATHER 2
EXTREME AIR CLEANER ELITE AIR CLEANER - MILWAUKEE-EIGHT® ENGINE
We’ve taken the iconic Screamin’ Eagle® Heavy Breather Take a deep breath. This Screamin’ Eagle® Heavy Breather
Air Cleaner to the next level–an extreme performance Elite picks up where the past generation Milwaukee-Eight
level. Designed for maximum performance, this extra-large Heavy Breather left off with a 15% air flow improvement.
Screamin’ Eagle Heavy Breather Extreme Air Filter flows 42% Redesigned to support even more performance with engine
more air than a traditional Heavy Breather filter. Air moves builds pushing over 135hp. The iconic Heavy Breather Air
smoothly through the filter due to an interior bell-shape Cleaner features a forward-facing oiled cotton filter element
feature and then travels through a unique round to oval tran- that flows large volumes of clean air into the engine. The
sitioned tube to improve leg clearance while providing unob- short, low profile cast tube rams the charge directly into the
structed air to the throttle body. At speeds over 60 mph, the throttle body with little turbulence for increased power and
filter captures air from the front, forcing the air through a torque, and the intake tube mounts to a custom back plate
smaller area to create a RAM air effect, while the long intake that features integral breathers and covers the throttle body
tube enhances torque beyond other Ventilator and Round electronics for a finished look. The slanted compact filter
High-Flow Filters for enhanced acceleration. Designed to adds an aggressive performance look, and it is shaped to allow
feed a large displacement engine enough clean air that can installation on Touring bikes equipped with fairing lowers. This
support output of over 150hp. The cast aluminum intake tube Elite version includes an integrated cover manufactured from
and back plate are dressed in rich, gloss black or mirror-like forged aluminum and precision machined to further enhance
chrome. The back plate features a Screamin’ Eagle logo. Kit the stylized performance look while exposing a majority of the
includes all required mounting hardware. Optional Rain Sock filter to maximize airflow. Available in your choice of chrome
P/N 29400424 is available to protect the exposed element in or gloss black finish, the kit includes filter, cover, intake tube,
inclement weather. custom back plate, and all mounting hardware.
Fits ’18-later Softail®, ’17-later Touring (except models Fits ’18-later Softail® models and ’17-later Touring and Trike
equipped with Fairing Lowers) and ’17-later Freewheeler® A. SCREAMIN’ EAGLE HEAVY BREATHER EXTREME AIR CLEANER – CHROME B. SCREAMIN’ EAGLE® HEAVY BREATHER ELITE AIR CLEANER - models. All models require ECM calibration with Screamin’
models. Does not fit models equipped with Fairing Lower MILWAUKEE-EIGHT® ENGINE Eagle Pro Street Tuner for proper installation. Does not fit on
Glove Boxes, Fairing Lower Speakers or Road Glide® Fairing models equipped with fairing lower glove boxes or fairing lower
Spoilers. All models require ECM calibration with Screamin’ speakers. Pending approval for use in California on ’21-’22
Eagle Pro Street Tuner for proper installation. Pending models. Refer to H-D. com/shop for status.
approval for use in California on ’21-’22 models. Refer to H-D. 29400406 Chrome.
com/shop for status.
29400407 Gloss Black.
29400388 Chrome.
29400387 Gloss Black. Also available:
SCREAMIN’ EAGLE® HEAVY BREATHER ELITE AIR
CLEANER - FILTER
K&N® replacement air filters are engineered to improve airflow
for increased horsepower and quicker acceleration. K&N
filters provide excellent filtration, and because they are wash-
able and reusable, you can clean the filter whenever condi-
tions demand. Designed as direct replacements for specified
fitments.
29400405
Fits ’18-later Softail® and ’17-later Touring and Trike models
equipped with Heavy Breather Elite Air Cleaner P/N
29400406 or 29400407.
2
A. SCREAMIN’ EAGLE HEAVY BREATHER EXTREME AIR CLEANER – GLOSS BLACK B. SCREAMIN’ EAGLE® HEAVY BREATHER ELITE AIR CLEANER -
GLOSS BLACK
SCREAMIN’ EAGLE
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to products
product meeting 50-State emissions and noise standards meeting EPA (49-State) and/or California (50-State) emissions
in the United States. and noise standards in the United States as specified.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN’ EAGLE HEAVY BREATHER A. SCREAMIN’ EAGLE HEAVY BREATHER B. SCREAMIN’ EAGLE® HEAVY BREATHER ELITE AIR CLEANER -
EXTREME AIR CLEANER – CHROME EXTREME AIR CLEANER – GLOSS BLACK CHROME
348 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 349
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN’ EAGLE® VENTILATOR 2 E. SCREAMIN’ EAGLE® VENTILATOR AIR CLEANER 2
EXTREME AIR CLEANER KIT – MILWAUKEE-EIGHT® ENGINE
Let it breathe! The open-face filter design of the Screamin’ This low-profile oval air cleaner features an exposed filter
Eagle® Ventilator Extreme Air Cleaner Kit flows 39% more air element and a cast back plate designed to provide maximum
than a traditional perimeter high-flow filter. When combined airflow to the throttle body. This easy-to-install air cleaner
with an additional 1/2" of air filter thickness and the smooth produces significant performance gains, while the stylish
radius die-cast back plate, this open filter can feed a large cover is tapered for added leg clearance. This complete kit
displacement engine with an unobstructed flow of clean air includes low-profile air cleaner cover, high-flow filter element,
that can support output of over 150hp. Kit includes a die-cast cast aluminum back plate, diamond-cut Screamin’ Eagle®
back plate, and open-face, water-resistant, washable oiled- medallion and all required installation hardware. Protective
cotton filter element and all required installation gaskets and Rain Sock is included. 50-State U.S. EPA compliant.
hardware. Optional Rain Sock P/N 29400412 is available to
protect the exposed element in extreme weather. Choice Fits ’18-later Softail®, and ’17-later Touring and Trike models.
of either Gloss Black (P/N 61300994) or Chrome (P/N All models require ECM calibration with Screamin’ Eagle Pro
61300993) Cover Kit required to complete installation. Street Tuner for proper installation. ECE compliant on ’17-later
CVO™ Touring models. Pending approval for use in California
Fits ’ 18-later Softail® and ’17-later Touring and Trike models. A. SCREAMIN’ EAGLE VENTILATOR EXTREME AIR CLEANER – CHROME E. SCREAMIN’ EAGLE VENTILATOR AIR CLEANER KIT – on ’21-’22 models. Refer to H-D.com/shop for status.
Requires Ventilator Extreme Air Cleaner Cover Kit P/N (SHOWN WITH CHROME COVER P/N 61300993) MILWAUKEE-EIGHT – CHROME 29400299 Chrome.
61300993 or 61300994 to complete installation. All models
29400298 Gloss Black.
require ECM calibration with Screamin’ Eagle Pro Street Tuner
for proper installation. pending approval for use in California
on ’21-’22 models. Refer to H-D.com/shop for status. F. DEFIANCE COLLECTION VENTILATOR
AIR CLEANER TRIM – MILWAUKEE-EIGHT ENGINE
29400396 Chrome. This forged and machined Defiance Air Cleaner Trim kit adds a
29400397 Gloss Black. premium touch to the Milwaukee-Eight® Ventilator Air Cleaner.
The billet-style band with deep longitudinal lines and H-D logo
B. SCREAMIN’ EAGLE VENTILATOR EXTREME AIR wraps the center section of the Ventilator Air Cleaner face
CLEANER COVER plate for a contemporary look. The Defiance Air Cleaner Trim
The Ventilator Extreme Air Cleaner Cover trims the face of the is available in your choice of chrome, machine cut anodized
Screamin’ Eagle Ventilator Extreme filter in style and features black or full black finishes. Kit includes trim band and mount-
aggressive mounting lugs, polished stainless-steel custom ing hardware. Protective Rain Sock P/N 29400177 or 29762-
ARP fasteners and an inset Screamin’ Eagle medallion. The 09 is available separately.
cast aluminum, rich gloss black cover wraps the leading
edge of the filter element, covering the rubber gasket with- Fits ’18-later Softail, and ’17-later Touring and Trike models
out restricting airflow. This Air Cleaner Cover is required to equipped with Ventilator Air Cleaner P/N 29400298 or
complete installation of the Ventilator Extreme Air Cleaner Kit 29400299. Also fits ’18-later Softail models with 114CI engines
P/N 29400396 & 29400397. and ’17-later CVO touring models with Original Equipment
Ventilator Air Cleaner with separate purchase of Air Filter P/N
Fits Screamin’ Eagle Ventilator Extreme Air Cleaner Kits P/N 29400293.
29400396 and 29400397. Includes necessary ARP hardware. 2 61300768 Chrome.
Also fits standard Ventilator Air Cleaner Kits P/N 29400298
A. SCREAMIN’ EAGLE VENTILATOR EXTREME AIR CLEANER – GLOSS BLACK E. SCREAMIN’ EAGLE VENTILATOR E. SCREAMIN’ EAGLE VENTILATOR 61300769 Gloss Black Anodized.
and 29400299 with separate purchase of Extreme Ventilator
Air Filter P/N 29400400. (SHOWN WITH GLOSS BLACK COVER P/N 61300994) AIR CLEANER KIT – AIR CLEANER KIT – 61300770 Gloss Black with Highlights.
61300993 Chrome. MILWAUKEE-EIGHT – GLOSS BLACK MILWAUKEE-EIGHT – BLACK
61300994 Gloss Black.
SCREAMIN’ EAGLE
demand. B. SCREAMIN’ EAGLE VENTILATOR EXTREME B. SCREAMIN’ EAGLE VENTILATOR EXTREME F. DEFIANCE COLLECTION VENTILATOR F. DEFIANCE COLLECTION VENTILATOR
29400400 AIR CLEANER COVER – CHROME AIR CLEANER COVER – GLOSS BLACK AIR CLEANER TRIM – AIR CLEANER TRIM –
Fits Screamin’ Eagle Ventilator and Ventilator Extreme Air MILWAUKEE-EIGHT – CHROME MILWAUKEE-EIGHT – GLOSS BLACK
Cleaner Kits. Requires Ventilator Extreme Air Cleaner Cover
Kit P/N 61300993 or 61300994 to complete installation.
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
C. SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK D. SCREAMIN’ EAGLE VENTILATOR EXTREME F. DEFIANCE COLLECTION VENTILATOR F. DEFIANCE COLLECTION VENTILATOR
K&N AIR FILTER ELEMENT AIR CLEANER TRIM – MILWAUKEE-EIGHT – AIR CLEANER TRIM – MILWAUKEE-EIGHT
GLOSS BLACK WITH HIGHLIGHTS
350 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 351
Milwaukee-Eight® Stage I Upgrade High-Flow Round Air Cleaner Covers
A. SCREAMIN’ EAGLE® ROUND EXTREME-FLOW 2 D. SCREAMIN’ EAGLE® ROUND AIR CLEANER COVER –
AIR CLEANER – CENTER BOLT RATCHET
The open-face filter design of the Screamin’ Eagle® Extreme- The Ratchet Air Cleaner Cover trims the face of the Screamin’
Flow Air Cleaner Kit provides 60% more filtered surface area Eagle® Round Air Cleaner filter in style. Ideal for use with
to flow 11% more air than a traditional perimeter high-flow Extreme open face filters, the forged aluminum cover wraps
filter. When combined with the smooth radius die-cast back the leading edge of the filter element, covering the rubber
plate, this open filter can feed a large displacement engine gasket without restricting the airflow. The Ratchet Cover is
with an unobstructed flow of clean air. While sized to fit behind finished in rich black, and features a center bar with Screamin’
Original Equipment or accessory center-bolt air cleaner covers, Eagle script and a lugged outer ring. The kit includes a black
the deep open-face filter provides maximum airflow and style filler plate to cover the unfinished face of standard High Flow
when paired with a matching open-face air cleaner trim option. filter for a clean blacked-out appearance.
Kit includes the gloss-black finished die-cast back plate with STOCK FILTER HIGH FLOW FILTER EXTREME FLOW FILTER
61300845
laser-engraved Screaming Eagle logo, an open-face wash- Fits ’18-later Softail® and ’17-later Touring and Trike models
able oiled-cotton filter element, and all required installation equipped with Screamin’ Eagle round High Flow Air Cleaner.
gaskets and hardware. Optional Rain Sock P/N 29400363 is
available to protect the exposed element in inclement weather. E. SCREAMIN’ EAGLE ROUND AIR CLEANER COVER –
50-State U.S. EPA compliant (except FLSB). AIR CLEANER FILTER ELEMENT COMPARISON D. SCREAMIN’ EAGLE ROUND AIR CLEANER E. SCREAMIN’ EAGLE ROUND AIR CLEANER
COVER – RATCHET COVER – CALIBRE CALIBRE
29400357 Extreme Open-Face Filter. The unique open slot design of the Calibre Air Cleaner Cover
Fits ’18-later Softail® and ’17-later Touring and Trike models. maximizes style without compromising performance. Ideal for
’17-later Touring and Trike models require separate purchase use with Extreme open face filters, the forged aluminum cover
of accessory round air cleaner cover or trim. Not compatible wraps the leading edge of the filter element, covering the
with air cleaner cover on CVO™ Touring models. All models rubber gasket without restricting the airflow. The gloss black
require ECM calibration with Screamin’ Eagle Pro Street Calibre Cover features 3 radiused slots cut into the face and a
Tuner for proper installation. Pending approval for use in Screamin’ Eagle logo prominently on display. The kit includes
California on ’21-’22 models. Refer to H-D.com/shop for a black filler plate to cover the unfinished face of standard
status. High Flow filter for a clean blacked-out appearance.
61300846
B. SCREAMIN’ EAGLE ROUND HIGH-FLOW 2 Fits ’18-later Softail and ’17-later Touring and Trike models
AIR CLEANER – CENTER BOLT equipped with Screamin’ Eagle round High Flow Air Cleaner.
The Screamin’ Eagle High-Flow Air Cleaner Kit provides
increased airflow to boost the power of your Milwaukee- F. AIR CLEANER TRIM KITS
Eight® engine equipped model. The one-piece cast back plate The perfect blend of performance and style. Available in a
is system-matched to the throttle body to deliver a smooth wide variety of styles, this bolt-on Air Cleaner Trim is sized to
uninterrupted flow, and shaped to permit air to enter around cover the face of most Screamin’ Eagle Round High-Flow Air
the entire perimeter of the air cleaner housing. The back Cleaners. You can continue the look of your custom collection
plate is topped with a washable perimeter-flow oiled-cotton while maximizing air flow to the engine. Model-specific rain
filter element that captures debris while passing significantly socks are available to protect the open element during inclem-
more air than the stock filter. This High Flow Air Cleaner can
be dressed with most round Original Equipment or accessory
2 ent weather.
center-bolt air cleaner covers. Or choose to flaunt your perfor- Fits Evolution® 1340 models, ’99-’08 Dyna®, ’00-’15 Softail
A. SCREAMIN’ EAGLE ROUND EXTREME-FLOW AIR CLEANER – CENTER BOLT F. AIR CLEANER TRIM KITS – F. AIR CLEANER TRIM KITS –
mance gains with the open element look, and finish it off with (except FLS, FLSS, FLSTSB, and FXS) and ’99-’13 Touring and
BRASS COLLECTION DARK CUSTOM
custom Air Cleaner Trim from one of the Harley-Davidson® Trike models equipped with oval-shaped Original Equipment air
decorative collections. This kit includes air cleaner element, cleaner cover. Also fits models equipped with Screamin’ Eagle
gloss black back plate with laser-engraved Screaming Eagle Round High-Flow Air Cleaner Kits with separate purchase of
logo, breather and all required hardware. Optional Rain Sock Rain Sock Kit P/N 28728-10 or Air Cleaner Trim Installation
P/N 29400363 is available to protect the exposed element in Kit P/N 12400158.
inclement weather. 50-State U.S. EPA compliant. 61400339 Brass Collection.
29400355 61300057 Dark Custom™ Collection.
Fits ’18-later Softail® and ’17-later Touring and Trike models.
27956-10 Number One Skull Collection.
’17-later Touring and Trike models require separate purchase
of accessory round air cleaner cover or trim. Not compatible 29400366 Willie G Skull – Black.
with air cleaner cover on CVO™ Touring models. All models 29417-04 Willie G Skull – Chrome.
require ECM calibration with Screamin’ Eagle® Pro Street 61400323 Airflow Collection.
Tuner for proper installation. Pending approval for use in 29328-99 Live To Ride Collection – Gold.
California on ’21-’22 models. Refer to H-D.com/shop for
status. Also available: (not shown)
SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK
C. SCREAMIN’ EAGLE ROUND HIGH-FLOW 2 Protect your exposed-element air cleaner during inclement
AIR CLEANER – PERIMETER BOLT weather. This mesh cover stretches over the filter to repel
Feed your engine more air while maintaining the fresh-from- moisture that could damage the filter and be drawn into the
the-factory look. Designed to accept the Original Equipment engine. The breathable cover does not significantly reduce air
Softail perimeter-bolt air cleaner cover, this Screamin’ Eagle 2 flow to the engine.
High-Flow Air Cleaner Kit allows free breathing and unob-
SCREAMIN’ EAGLE
structed airflow to your Milwaukee-Eight® engine. The die-cast 29400363 For Round High-Flow Filter.
B. SCREAMIN’ EAGLE ROUND HIGH-FLOW AIR CLEANER – CENTER BOLT F. AIR CLEANER TRIM KITS – F. AIR CLEANER TRIM KITS – Fits ’18-later Softail and ’17-later Touring and Trike models
back plate is sized to permit airflow around the entire perim- #1 SKULL WILLIE G SKULL – CHROME
eter of the air cleaner. Your engine gets more air, and you feel equipped with Screamin’ Eagle High-Flow Air Cleaners with
more power throughout the rev range. The back plate features round perimeter flow air cleaner element.
5 threaded lugs that accept the perimeter-bolt air cleaner 29493-05A For Heavy Breather Filter.
cover, and a chamfered throat that allows smooth flow into Fits models equipped with Screamin’ Eagle Heavy Breather
the throttle body. The kit includes the gloss-black finished Air Cleaner Kits (except Compact Heavy Breather P/N 28716-
die-cast back plate, a perimeter-flow washable oiled-cotton 10, Heavy Breather Elite P/N 29400173, 29400172 or
filter element, all required installation gaskets and hardware 29400285, and Milwaukee-Eight® Heavy Breather
and a laser-engraved Screamin’ Eagle logo to finish the look. P/N 29400263 or 29400264).
Optional Rain Sock P/N 29400363 is available to protect the
exposed element in inclement weather. 50-State U.S. EPA
compliant.
29400356
Fits ’18-later FLFB, FLSB, FXBB, FXBR, FXBRS and FXFB and
’18-’19 FXBRS models with Original Equipment perimeter-
bolt air cleaner cover. Not recommended for use with center-
bolt air cleaner covers or trim. All models require ECM
calibration with Screamin’ Eagle® Pro Street Tuner for proper
Street legal and/or street compliant statements refer to
installation. Pending approval for use in California on ’21-’22
product meeting 50-State emissions and noise standards
models. Refer to H-D.com/shop for status. in the United States.
Street legal and/or street compliant statements refer to 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
product meeting 50-State emissions and noise standards in the
United States. C. SCREAMIN’ EAGLE ROUND HIGH-FLOW AIR CLEANER – PERIMETER BOLT F. AIR CLEANER TRIM KITS – F. AIR CLEANER TRIM KITS –
The street legal and/or street compliant statements may AIRFLOW LIVE TO RIDE
not apply to markets outside of the United States.
352 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 353
Round Air Cleaner Covers Milwaukee-Eight® Stage I Upgrade
A. DARK CUSTOM™ LOGO COLLECTION – E. SCREAMIN’ EAGLE® WEDGE HIGH-FLOW 2
AIR CLEANER TRIM AIR CLEANER
The famous Harley-Davidson #1 logo with a sinister twist. Screamin’ Eagle® High-Flow Air Cleaner Kits allow free
Styled to complement chrome or blacked-out motorcycles, breathing and unobstructed airflow to your Milwaukee-Eight®
this rich black air cleaner trim features a machined Dark engine–while maintaining a subtle Original Equipment look.
Custom #1 logo at its center. Formed from aluminum, this self- These kits feature a die-cast back plate sized to provide an
adhesive buckshot-hole cover fits perfectly into the recessed open-element function that permits airflow around the entire
face of the Original Equipment Softail® perimeter-bolt air perimeter of the air cleaner and through the ram air opening at
cleaner cover. the front. Your engine gets more air, and you feel more power
61300892 throughout the rev range. Kit includes the die-cast back plate,
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with a high-flow oiled-cotton filter element, all required installation
Original Equipment perimeter bolt air cleaner cover. gaskets and hardware and a diamond-cut Screamin’ Eagle
medallion to finish the look. Kits are available with your choice
B. AIR CLEANER TRIM – BAR & SHIELD of chrome or textured black back plate to match your custom-
Styled to complement polished or blacked-out engines, this izing style. 50-State U.S. EPA compliant.
rich black bullet-hole air cleaner trim features a simple etched Fits ’17-later Touring and Trike models equipped with wedge
Bar & Shield logo at its center. Easy to install, this self-adhe- style air cleaner. Not compatible with air cleaner cover on
sive formed aluminum trim fits perfectly into the recessed CVO™ Touring models. All models require ECM calibration
face of the Softail® models Original Equipment perimeter bolt with Screamin’ Eagle® Pro Street Tuner for proper instal-
air cleaner cover. lation. ECE compliant on ’17-later CVO™ Touring models.
61300891 Pending approval for use in California on ’21-’22 models.
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with 2 Refer to H-D.com/shop for status.
Original Equipment perimeter bolt air cleaner cover. 29400246A Chrome.
A. DARK CUSTOM LOGO COLLECTION – AIR B. AIR CLEANER TRIM – BAR & SHIELD E. SCREAMIN’ EAGLE WEDGE HIGH-FLOW AIR CLEANER 29400245A Black.
C. AIR CLEANER TRIM – BRUSHED ALUMINUM CLEANER TRIM
Show off your Milwaukee-Eight® engine’s displacement with Also available:
pride. Available for 107- and 114-cubic-inch engines, this
SCREAMIN’ EAGLE AIR CLEANER MEDALLION –
brushed aluminum and black trim is the perfect comple-
MILWAUKEE-EIGHT
ment to chrome or black engine finishes. This easy-to-install
Dress your factory air cleaner cover with a diamond-cut
self-adhesive formed aluminum trim fits perfectly into the
Screamin’ Eagle medallion. Lock patch holds the medal-
recessed face of the Softail models Original Equipment perim-
lion firmly in place and is easy to remove for access to the air
eter bolt air cleaner cover.
cleaner hardware.
61300788 107 Logo.
61300762
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with
Fits ’17-later Touring and Trike models equipped with Original
Original Equipment perimeter bolt air cleaner cover.
Equipment wedge air cleaner cover. Does not fit CVO models.
D. BOBBER-STYLE ROUND AIR CLEANER COVER
F. MILWAUKEE-EIGHT® ENGINE AIR CLEANER COVER –
Low-profile round air cleaner cover adds an attractive nostal-
GLOSS BLACK
gic look to any bike’s profile. This cover can be accented with
Complete the blacked-out look. This Gloss Black Air Cleaner
your choice of stylish air cleaner trim collections (sold sepa-
Cover adds a sinister touch without changing the signature
rately) for a personalized look. The cover features a cut-away
profile of your Milwaukee-Eight engine.
bottom design that exposes the filter element to maximize the
airflow when installed with a Screamin’ Eagle® High-Flow Air 61300828
Cleaner Kit. Fits ’17-later Touring (except CVO) and Trike models with
Original Equipment wedge style air cleaner or Screamin’
Fits ’12-’16 XL1200V and ’11-’15 FLS and FXS models with Eagle Wedge High-Flow Air Cleaner.
Original Equipment round air cleaner. Also fits models
equipped with Screamin’ Eagle Round High-Flow Air Cleaner
Kits.
61300120 Chrome.
61300128 Gloss Black.
2 2
C. AIR CLEANER TRIM – BRUSHED ALUMINUM E. SCREAMIN’ EAGLE WEDGE HIGH-FLOW AIR E. SCREAMIN’ EAGLE WEDGE HIGH-FLOW AIR
CLEANER – CHROME CLEANER – BLACK
SCREAMIN’ EAGLE
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
D. BOBBER-STYLE ROUND AIR CLEANER COVER D. BOBBER-STYLE ROUND AIR CLEANER COVER F. MILWAUKEE-EIGHT ENGINE AIR CLEANER COVER – GLOSS BLACK
– CHROME – GLOSS BLACK
354 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 355
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN' EAGLE HIGH-FLOW EXHAUST SYSTEM 5 B. SCREAMIN’ EAGLE® STREET CANNON 2
– SOFTAIL MODELS MUFFLERS – CHROME
The Screamin’ Eagle® High-Flow Exhaust for Softail® models Call attention to your ride without calling attention to your
provides bolt-on performance by reducing the catalyst restric- ride. Tuned to provide a deep bass exhaust note and great
tions and improving exhaust flow. This High-Flow Exhaust is rumble throughout the RPM range, these 3.5" Street Cannon
optimized for use with the Screamin’ Eagle 128/131 Stage IV mufflers deliver the famous Harley sound while preserving
Kits or 131 Crate Engine equipped for Softail® models with the peace with your neighbors. You get a nice bark when you
Milwaukee-Eight® engine. Maximize the horsepower and get on the throttle, and a deep mellow tone when cruising at
torque of your performance build when your bike needs it constant speed. The tuned baffles work with the internal high-
most, all while reducing the weight of your exhaust system by flow catalyst to strike the perfect balance required to deliver
over 20 percent. Offered in durable Satin Black or Stainless performance that you can feel in your gut. The large 3.5" diam-
finishes to complement your customization journey. Go ahead, eter Street Cannons provide free flow of exhaust gases with
let it rip! just the right amount of back pressure for a smooth-running
• Replaces the stock head pipe and mufflers with large ride. Mufflers include matching chrome end caps with subtle
diameter, free-flowing head pipes and matching muffler. engraved Screamin’ Eagle logo. Looking to black out your ride?
• Mandrel-bent and TIG welded stainless steel headers are Optional satin black wrap-around muffler shields and end
meticulously assembled with race shop precision for perfect caps are available to complete the look.
fitment on your motorcycle. 64900636 Short – Domestic.
• Maintains flat torque curve from cruising RPM to redline. Fits ’18-later FLDE, FLHC and FLHCS models. Includes
• 2-into-1 full exhaust system reduces weight and provides chrome muffler end caps. Installation requires separate
serious performance look. purchase of Muffler Clamps P/N 65900012 (Qty 2) and
• Pre-tapped for stock or wide-band O2 sensors for easy, 5 2 Exhaust Gaskets P/N 65900017 (Qty 2). All models require
ECM calibration with Screamin’ Eagle Pro Street Tuner (sold
emissions-compliant installation.
• Dial system to motorcycle by using the Screamin’ Eagle® separately). Pending approval for use in California on ’21-’22
A. SCREAMIN' EAGLE HIGH-FLOW EXHAUST SYSTEM – SOFTAIL MODELS B. SCREAMIN’ EAGLE STREET CANNON MUFFLERS – CHROME, SHORT
Street Performance Tuner to tune ECM specifically to match models. Refer to H-D.com/shop for status.
(SHOWN ON SOFTAIL DELUXE MODEL)
performance upgrades. 64901192 Short – ECE Certified.
Designed for International markets that require ECE
49-State U.S. EPA Compliant on select ’18-later Softail® certified mufflers. Fits ’21-later FLDE, FLHC and FLHCS
models. Refer to www.H-D.com/Shop for status. models. Includes chrome muffler end caps. Installation
requires separate purchase of Muffler Clamps P/N 65900012
Fits ’18-later Softail models (except FXDRS, FLFB, FLFBS, (Qty 2) and Exhaust Gaskets P/N 65900017 (Qty 2).
FXBR, and FXBRS). Compliant 49-State, Canada, Australia, 64900638 Short – ECE Certified.
and New Zealand. Also fits ’18-20 Softail models sold in Designed for International markets that require ECE certified
Mexico. Does not fit California models. mufflers. Fits ’18-’20 FLDE, FLHC and FLHCS models.
64900828 Satin Black. Includes chrome muffler end caps. Installation requires
64900829 Stainless. separate purchase of Muffler Clamps P/N 65900012 (Qty 2)
and Exhaust Gaskets P/N 65900017 (Qty 2).
64900690 Long – Domestic.
Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXBR,
FXBRS, FXLR, FXLRS, FXLRST and FXST models. Includes
chrome muffler end caps. Installation requires separate
purchase of Muffler Clamps P/N 65900012 (Qty 2) and
Exhaust Gaskets P/N 65900017 (Qty 2). All models require
ECM calibration with Screamin’ Eagle® Pro Street Tuner (sold
separately). Pending approval for use in California on ’21-’22
models. Refer to H-D.com/shop for status.
64901193 Long – ECE Certified.
Designed for International markets that require ECE
certified mufflers. Fits ’21-later FLFB, FLFBS, FLSL, FXBB,
FXBBS, FXBR, FXBRS, FXLR, FXLRS, FXLRST and FXST
models. Includes chrome muffler end caps. Installation
requires separate purchase of Muffler Clamps P/N 65900012
(Qty 2) and Exhaust Gaskets P/N 65900017 (Qty 2).
5 2 64900691 Long – ECE Certified.
Designed for International markets that require ECE certified
A. SCREAMIN' EAGLE® SOFTAIL® MODEL HIGH-FLOW EXHAUST SYSTEM – SOFTAIL MODELS, B. SCREAMIN’ EAGLE STREET CANNON MUFFLERS – CHROME, LONG mufflers. Fits ’18-’20 FLFB, FLFBS, FLSL, FXBB, FXBBS,
SATIN BLACK (SHOWN ON FAT BOY MODEL) FXBR, FXBRS, FXLR, FXLRS, FXLRST and FXST models.
Includes chrome muffler end caps. Installation requires
separate purchase of Muffler Clamps P/N 65900012 (Qty 2)
and Exhaust Gaskets P/N 65900017 (Qty 2).
SCREAMIN’ EAGLE
These easy-to-install caps allow you to finish your Softail®
3.5" Screamin Eagle Street Cannon mufflers your way. Sold
in pairs these Satin Black end caps feature a subtle engraved
Screamin’ Eagle script for a clean look. Installation hardware
included.
65100153
Fits ’18-later Softail® models equipped with Screamin’ Eagle
Street Cannon Mufflers P/N 64900636, 64900638,
64900690 or 64900691.
NOTE: There is no warranty on exhaust pipes and mufflers NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating, characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing. etc. and is not caused by defective manufacturing.
Street legal and/or street compliant statements refer to 65400460 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
5 2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN' EAGLE® SOFTAIL® MODEL HIGH-FLOW EXHAUST SYSTEM – SOFTAIL MODELS, B. STANDARD CHROME MUFFLER END CAPS C. SCREAMIN’ EAGLE SATIN BLACK MUFFLER
STAINLESS (INCLUDED WITH STREET CANNON MUFFLERS) END CAPS
356 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 357
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN’ EAGLE® STREET® CANNON 2 C. SATIN BLACK MUFFLER SHIELDS
MUFFLERS – SPORT GLIDE™ MODELS Complete the blacked-out look. These rich satin-black shields
Tuned to provide a deep bass exhaust note and great rumble wrap the chrome Street Cannon mufflers and complete the
throughout the RPM range, this 4.5" Street Cannon muffler conversion to a sinister look. Styled to hug the lines of the
delivers the famous Harley sound while preserving the peace mufflers, the blunt-cut shields are sized to expose the muffler
with your neighbors. You get a nice bark when you get on the end cap for a custom touch. Easy-to-install kit includes front
throttle, and a deep mellow tone when cruising at constant and rear shields and black mounting clamps.
speed. The tuned baffle works with the internal high-flow cata- 65400457 Short Shields.
lyst to strike the perfect balance required to deliver perfor- Fits ’18-later FLDE, FLHC and FLHCS models equipped with
mance that you can feel in your gut. The large 4.5" diameter Screamin’ Eagle® Street Cannon Mufflers P/N 64900636 or
Street Cannon provides free flow of exhaust gases with just 64900638.
the right amount of back pressure for a smooth-running ride
65400461 Long Shields.
and can be fitted with a wide variety of styled muffler end
Fits 18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXBR, FXBRS,
caps to provide the perfect finishing touch. Requires choice
FXLR, FXLRS, FXLRST and FXST models equipped with
of chrome or satin black muffler shield with laser etched logo.
Screamin’ Eagle® Street Cannon Mufflers P/N 64900690 or
Fits ’18-later FLSB models. Installation requires separate C. SATIN BLACK MUFFLER SHIELDS – SHORT 64900691.
purchase of Muffler Shield, Muffler End Cap, Muffler Clamp (SHOWN ON FLHC MODEL WITH SATIN BLACK EXHAUST SHIELDS)
P/N 65900007 (Qty 1) and Muffler Gasket P/N 65900040 D. SATIN BLACK EXHAUST SHIELD KIT
(Qty 1). Requires ECM calibration with Screamin’ Eagle Pro Extend the custom look along the bike’s entire profile. These
Street Tuner (sold separately). Pending approval for use in formed steel exhaust shields are available in a unique satin
California on ’21 models. Refer to H-D.com/shop for status. black ceramic finish that complements black Screamin’ Eagle
64900752 Chrome. 2 Street Cannon Muffler Shields. This exhaust shield kit has
survived stringent Harley-Davidson testing for durability and
64900754 Black. 65400458 65400472 corrosion resistance. Manufactured to Original Equipment
A. SCREAMIN’ EAGLE STREET CANNON MUFFLERS – SPORT GLIDE MODELS, BLACK
Designed for International markets that require ECE certi- (SHOWN WITH BLACK MUFFLER SHIELD) standards for exact fit, the easy-to-install kit includes front
fied mufflers. Fits ’21-later FLSB models. Installation and rear head pipe shields.
requires separate purchase of Muffler Shield, Muffler End 65400458
Cap, Muffler Clamp P/N 65900007 (Qty 1) and Muffler Gasket Fits ’18-later FLDE, FLHC and FLHCS models.
P/N 65900040 (Qty 1). 65400459 65400459
64901190 Chrome, Fits ’18-later FLSL, FXLR and FXST models.
64901191 Black, 65400460
Fits ’18-later FLFB, FLFBS, FXBR and FXBRS models.
Designed for International markets that require ECE certi-
65400472
fied mufflers. Fits ’18-’20 FLSB models. Installation requires
Fits ’18-later FLSB, FXFB, FXFBS and ’19-’20 FXDRS models.
separate purchase of Muffler Shield, Muffler End Cap, Muffler
Clamp P/N 65900007 (Qty 1) and Muffler Gasket P/N 65400480
65400460 Fits ’18-’21 FLSB models.
65900040 (Qty 1).
64900756 Chrome, ECE 65400481 Collector Shield.
Fits ’18-later FXFB and FXFBS models.
64900758 Black, ECE
D. SATIN BLACK EXHAUST SHIELD KITS
Shown with:
MUFFLER SHIELD
Styled to hug the lines of the uniquely shaped stepped muffler
design of the Screamin’ Eagle Street Cannon for Sport Glide®
models. Offered in both chrome and satin black and feature a
subtle engraved Screamin’ Eagle script for a clean look.
Fits ’18-later FLSB models equipped with Screamin’ Eagle
Street Cannon Mufflers P/Ns 64900752, 64900754,
64900756, 64900758.
65400466 Chrome.
65400468 Black.
2
B. MUFFLER END CAPS – 4.5"
Fits ’18-later FLSB and ’17-later Touring models equipped A. SCREAMIN’ EAGLE STREET CANNON MUFFLERS – SPORT GLIDE MODELS, CHROME
with 4.5" Screamin’ Eagle Street Cannon Mufflers. Does not fit (SHOWN WITH CHROME MUFFLER SHIELD)
CVO™ Touring mufflers. Sold Individually.
1. 65100165 Slash Cut – Chrome.
2. 65100166 Slash Cut – Black.
3. 65100216 Empire – Chrome. 3
4. 65100217 Empire – Black. 2
SCREAMIN’ EAGLE
5. 65100218 Empire – Machine Cut. D. SATIN BLACK EXHAUST SHIELD KIT
6. 65100160 Two-Piece – Chrome. 4
7. 65100161 Two-Piece – Black. 1
5 7
6
NOTE: There is no warranty on exhaust pipes and mufflers NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating, characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing. etc. and is not caused by defective manufacturing.
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
B. MUFFLER END CAPS D. SATIN BLACK COLLECTOR SHIELD – FAT BOB MODELS
358 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 359
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN’ EAGLE® STREET CANNON 2 C. TWO-PIECE MUFFLER END CAP KIT – 4.5"
PERFORMANCE SLIP-ON MUFFLERS – 4.5" Shaped to provide a complete finishing touch to the rear of
Dialed in to enhance the performance of the Milwaukee- your bike, these slash-cut end caps feature a reverse cone
Eight® engine, these slip-on mufflers feature a large inlet for rolled edge for a massive solid billet look. The reverse cone
improved airflow. When teamed with a free-flowing air cleaner, opening hugs the internal slotted flash suppressor-inspired
these Street Cannon mufflers deliver horsepower and torque barrel for a weapons-grade style.
gains you can feel. The large 4.5" diameter mufflers are tuned
to provide a rich exhaust note, a deep bass rumble and great Fits ’17-later Touring models equipped with 4.5" Screamin’
throaty sound when you roll on the throttle. But to strike a Eagle Street Cannon Mufflers and Screamin’ Eagle High-Flow
balance with your neighbors, the large internal volume and Exhaust Systems with 4.5" Street Cannon Mufflers.
strategically designed baffles help maintain the peace at 65100078 Chrome.
partial throttle. The large-diameter body adds a muscular look C. TWO-PIECE MUFFLER END CAP KIT – 4.5" – C. TWO-PIECE MUFFLER END CAP KIT – 4.5" – 65100076A Satin Black.
to your ride, and the newly designed mounts keep the mufflers CHROME SATIN BLACK
tucked in close to the bags for a clean profile and can be fitted D. MUFFLER END CAP KIT – 4.5"
with a wide variety of styled muffler end caps to provide the These easy-to-install performance end caps allow you to finish
perfect finishing touch. your 4.5” Screamin’ Eagle® Street Cannon mufflers your way.
Fits ’17-later Touring models. Does not fit Trike models. Sold in pairs. Installation hardware included.
Installation requires separate purchase of Muffler Clamps P/N Fits ’17-later Touring models equipped with 4.5" Screamin’
65900012 and 65900015. Requires separate purchase of end Eagle Street Cannon Mufflers and Screamin’ Eagle High-Flow
caps. All models require ECM calibration with Screamin’ Eagle® Exhaust Systems with 4.5" Street Cannon Mufflers.
Pro Street Tuner for proper installation. Pending approval for
use in California on ’21-’22 models. Refer to H-D.com/shop 2 65100196 Blunt/Stainless Steel.
for status. 65100205 Slash Up/Down/Out-Gloss Black.
64900552A Chrome. A. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE SLIP-ON MUFFLERS – 4.5" – CHROME
(SHOWN WITH CHROME TWO-PIECE END CAPS) E. EMPIRE COLLECTION MUFFLER END CAP KIT - 4.5"
64900553B Satin Black. Executed in durable cast and billet aluminum, these Empire™
Fits ’21-later Touring Models. Does not fit Trike models. Collection End Caps add a captivating custom detail that
Designed for International markets that require ECE-certified complements other matching accessories.
mufflers. Include matching Two-Piece Muffler end caps. Fits ’17-later Touring models equipped with 4.5" Screamin’
Installation requires separate purchase of Muffler Clamps P/N Eagle Street Cannon Mufflers and Screamin’ Eagle High-Flow
D. MUFFLER END CAP KIT – 4.5" – BLUNT - D. MUFFLER END CAP KIT – 4.5" – SLASH UP/
65900012 and 65900015. Exhaust Systems with 4.5" Street Cannon Mufflers.
STAINLESS DOWN - GLOSS BLACK
64901208 Chrome. 65100219 Chrome.
64901205 Satin Black. 65100221 Machine Cut.
Fits ’17-’20 Touring models. Does not fit Trike models. 65100220 Satin Black.
Designed for International markets that require ECE certi-
fied mufflers. Includes matching Two-piece Muffler end caps. F. BLUNT SLASH UP/DOWN/OUT MUFFLER
Installation requires separate purchase of Muffler Clamps P/N END CAP KIT – 4.5"
65900012 and 65900015. These easy-to-install slash-cut end caps allow you to finish
64900555A Chrome – ECE Certified. your 4.5" Screamin’ Eagle Street Cannon mufflers your way.
Sold in pairs. Installation hardware included.
64900554B Satin Black – ECE Certified.
Fits ’17-later Touring models equipped with 4.5" Screamin’
B. SATIN BLACK EXHAUST SHIELD KIT Eagle® Street Cannon mufflers. Does not fit CVO™ Touring
These formed steel exhaust shields feature a unique black mufflers. Also fits High-Flow Exhaust Systems P/N’s
coating that complements the finish of the Screamin’ Eagle 64800059, 64800062, 65600329, 65600330, 65600331
black slip-on mufflers. The rich black coating maintains and 65600332.
its uniform black finish and has survived stringent Harley-
65100085 Chrome.
Davidson testing for durability and corrosion resistance.
Manufactured to Original Equipment standards for exacting fit, 65100084A Satin Black.
E. EMPIRE COLLECTION E. EMPIRE COLLECTION
the easy-to-install kit includes front and rear head pipe shields. MUFFLER END CAP KIT – MUFFLER END CAP KIT –
65400285A CHROME MACHINE CUT
Fits ’17-later Touring and Trike models.
2
A. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE SLIP-ON MUFFLERS – 4.5" – SATIN BLACK
(SHOWN WITH SATIN BLACK TWO-PIECE END CAPS)
SCREAMIN’ EAGLE
E. EMPIRE COLLECTION E. EMPIRE COLLECTION
MUFFLER END CAP KIT – SATIN BLACK MUFFLER END CAPS
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
B. SATIN BLACK EXHAUST SHIELD KIT F. BLUNT SLASH UP/DOWN/OUT F. BLUNT SLASH UP/DOWN/OUT
MUFFLER END CAP KIT – 4.5" – CHROME MUFFLER END CAP KIT – 4.5" – SATIN BLACK
360 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 361
Milwaukee-Eight® Stage I Upgrade Milwaukee-Eight® Stage I Upgrade
A. SCREAMIN' EAGLE® HIGH-FLOW EXHAUST 5 B. SCREAMIN’ EAGLE® STREET CANNON 2
SYSTEM WITH STREET CANNON MUFFLERS PERFORMANCE SLIP-ON MUFFLERS
The Screamin’ Eagle® High-Flow Exhaust system provides Cue the orchestra. We tuned these mufflers to provide an
bolt-on performance by reducing the catalyst restrictions exhaust note with some extra deep bass. You get the rumble
and improving exhaust flow. This exhaust system is optimized you want and enhance that famous Harley sound, while
for use with Screamin’ Eagle Stage Kit-equipped Milwaukee preserving the peace with your neighbors. The tuned baffles
Eight® engines. The complete exhaust system starts with work with the large internal volume to strike the perfect
race-shop constructed oversized mandrel-bent and hand balance required to deliver performance that you can feel
TIG-welded stainless steel head pipes, and flows through a in your gut. The large 4.0" diameter Street Cannons provide
unique crossover to improve the flow of spent cylinder gasses. free flow of exhaust gases with just the right amount of back
The large inlet 4.5" Street Cannon mufflers feature baffles that pressure for a smooth-running ride. The die-cast Screamin’
are optimized for aggressive performance and sound under Eagle® medallion adds a rich touch to your bike’s profile and
acceleration, and deliver a rich mellow note. The combina- a large selection of end cap designs are available (sold sepa-
rately) to provide the perfect finishing touch. 50-State U.S.
tion of tuned-flow headers and Street Cannon mufflers with 5 EPA compliant.
relocated catalyst maximizes horsepower, maintains solid
midrange torque and manages heat. The proof is in the horse- Fits ’09-’16 Touring and ’09-later Trike models (except CVO™
A. SCREAMIN’ EAGLE HIGH-FLOW EXHAUST SYSTEM WITH STREET CANNON MUFFLERS
power and torque numbers. Dial the system to your motor- models and ’10 FLHX and FLTRX models). Installation requires
STAINLESS STEEL WITH SATIN BLACK MUFFLERS
cycle by using the Screamin’ Eagle Pro Street Tuner to tune separate purchase of 4" end caps and Muffler Clamps P/N
your ECM specifically to match your performance upgrades. 65296-95A (Qty 2). All models require ECM calibration for
The complete system includes exhaust headers pre-tapped for proper installation. ’17-later Trike models require recalibration
standard or Screamin’ Eagle wide-band O2 sensors, large 4.5" with Screamin’ Eagle Pro Street Tuner (sold separately).
diameter Street Cannon mufflers, and matching exhaust heat
shields. Complete the look with your choice of custom muffler
2 64900186B Chrome.
end caps (sold separately). This High-Flow Exhaust System 64900187B Jet Black.
B. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE SLIP-ON MUFFLERS
is designed to pair with a 128CI or 131CI Stage IV Kit or Crate
(SHOWN WITH SLASH UP/DOWN/OUT END CAPS) C. MUFFLER END CAPS – 4"
Engine to ensure maximum performance. 49-State U.S. EPA
compliant. Refer to www.H-D.com/Shop for status. These End Cap Kits allow you to personalize your Screamin’
Eagle Street Performance Touring Mufflers. Available in your
Fits ’17-later Touring models. Does not fit Trike models. Does choice of styles, these easy-to-install caps are dressed with
not fit with Dominion™ Transmission Side Covers. Separate the same finish as the mufflers and exhaust shields for a
purchase of Screamin’ Eagle 4.5" endcaps required. All models Short Slash Up/Down/Out consistent look front to back. Sold in pairs, the kit includes all
require ECM calibration with Screamin’ Eagle Pro Street Tuner Revolver required mounting hardware.
for proper installation. See Dealer for details. Does not fit
Fits ’09-’16 Touring and ’09-later Trike models equipped with
California models.
Screamin’ Eagle Street Cannon Touring 4" End Cap Mufflers.
65600329 Stainless Steel Does not fit 4" CVO Touring mufflers.
with Satin Black Mufflers.
65100062 Short Slash.
65600330 Gloss Black
with Gloss Black Mufflers. 5 65100016 Revolver.
65100019 Slash Up/Down/Out.
65600331 Chrome
with Chrome Mufflers. A. SCREAMIN’ EAGLE HIGH-FLOW EXHAUST SYSTEM WITH STREET CANNON MUFFLERS 65100017 Fishtail.
GLOSS BLACK WITH GLOSS BLACK MUFFLERS 65100028 Satin Black Anodized.
65600332 Satin Black
with Satin Black Mufflers. 80611-09 Blunt Revolver.
SCREAMIN’ EAGLE
A. SCREAMIN’ EAGLE HIGH-FLOW EXHAUST SYSTEM WITH STREET CANNON MUFFLERS
CHROME WITH CHROME MUFFLERS
NOTE: There is no warranty on exhaust pipes and mufflers NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating, characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing. etc. and is not caused by defective manufacturing.
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
5 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN’ EAGLE HIGH-FLOW EXHAUST SYSTEM WITH STREET CANNON MUFFLERS C. MUFFLER END CAPS – 4"
SATIN BLACK WITH SATIN BLACK MUFFLERS
362 SCREAMIN’ EAGLE® STAGE II STAGE II SCREAMIN’ EAGLE® 363
Milwaukee-Eight® Stage II Upgrade Milwaukee-Eight® Cams
C. MILWAUKEE-EIGHT® PERFORMANCE CAMS 2
Duration @ Screamin’ Eagle® SE8-447 Cam – Torque
SCREAMIN’ EAGLE
increase in torque can be felt immediately off the line and continues to build by up to power starts to build @ 3000 RPM and continues to build by up to 24% at redline. kits, this high-performance cam enhances efficient filling of
120 120 120 120
a 14% increase @ 4500 RPM – the ideal power band for passing slow-moving vehicles. Riding the bike aggressively will require downshifting to lower gears to keep the
Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States.
The street legal and/or street compliant statements may not apply to markets outside of the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.
364 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 365
Milwaukee-Eight® Stage II Upgrade
A. SCREAMIN’ EAGLE® PREMIUM TAPERED 2
QUICK-INSTALL ADJUSTABLE PUSHRODS
These premium pushrods are tapered for enhanced clear-
ance at the cylinder head, allowing the use of higher-lift cams.
The one-piece chrome moly tube adds rigidity and durabil-
ity and the threaded adjustment feature provides easy cam
installation without removing the cylinder heads or rocker
boxes. To simplify adjustment, the tube features six flats, with
one flat marked with a large dot for tracking the adjustment.
The threaded rod features 4 flats to reduce wrench swing. Kit
includes 4 pushrods and required pushrod tube covers.
Fits ’18-later Softail® and ’17-later Touring and Trike models.
17900073 With Black Covers.
17900058 With Chrome Covers.
2
A. SCREAMIN’ EAGLE PREMIUM TAPERED QUICK-INSTALL ADJUSTABLE PUSHRODS –
MILWAUKEE-EIGHT POWERTRAIN – CHROME COVERS
SCREAMIN’
SC
S RE
CR AMIIN
EAM EAGLE
N’ E AGLE
AG LE
Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards
in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2
B. SCREAMIN’ EAGLE PERFORMANCE VALVE SPRING KIT – MILWAUKEE-EIGHT POWERTRAIN
366 SCREAMIN’ EAGLE® STAGE III STAGE III SCREAMIN’ EAGLE® 367
Milwaukee-Eight® Stage III Upgrade Milwaukee-Eight® Stage III Upgrade
A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE 5 B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE 5
STAGE III KITS STAGE III KITS
This Stage III kit has been developed for the rider looking for This Stage III kit has been developed for the rider looking for
a solid “seat of the pants” increase you can feel every time a solid “seat of the pants” increase you can feel every time
you roll on the throttle. The bump up in displacement and you roll on the throttle. The bump up in displacement and
compression deliver a significant increase in torque and compression deliver a significant increase in torque and
power over stock, all the while restoring the sensation of riding power over stock, all the while restoring the sensation of riding
solo when you’re loaded down. The Stage III 107CI to 119CI solo when you’re loaded down. The Stage III 107CI to 119CI
upgrade delivers up to 23% more horsepower and 17% more upgrade delivers up to 23% more horsepower and 17% more
torque and the 114CI to 122CI upgrade increases power by up torque and the 114CI to 122CI upgrade increases power by up
to 15% and 13% more torque when compared to the Original to 15% and 13% more torque when compared to the Original
Equipment engine configurations. Plus there’s a one-year Equipment engine configurations. Plus there’s a one-year
manufacturer’s warranty and eligibility for coverage under manufacturer’s warranty and eligibility for coverage under
factory vehicle warranty when dealer-installed within 60 days factory vehicle warranty when dealer-installed within 60 days
of vehicle purchase. of vehicle purchase.
• Delivers increased response throughout the entire RPM • Delivers increased response throughout the entire RPM
range. range.
• Provides thrilling acceleration when twisting the throttle. • Produces flexible roll-on passing power without a required
• Maintains flat torque curve from cruising RPM to redline. downshift.
• Can be installed without removing the engine from chassis. • Delivers excellent stop-light to freeway speed on-ramp
acceleration.
49-State U.S. EPA Compliant on select ’18-later Softail® Models.
Refer to www.H-D.com/Shop for status. 49-State U.S. EPA Compliant on select ’18-later Softail and
’17-later Touring models. Refer to www.H-D.com/Shop for
Performance components include: status.
• Screamin’ Eagle® 4.155 Big Bore Bolt-On Cylinders
• Screamin’ Eagle® Forged 11.0:1 High-Compression Performance components include:
Pistons and Rings • Screamin’ Eagle® 4.155 Big Bore Bolt-On Cylinders
• Screamin’ Eagle SE8-447 Torque • Screamin’ Eagle® Forged 11.0:1 High-Compression
• Screamin’ Eagle High Capacity Tappets Pistons and Rings
• Screamin’ Eagle High Performance Cam Bearing • Screamin’ Eagle SE8-447 Torque Cam
• Screamin’ Eagle Stage III Timer Cover & Insert • Screamin’ Eagle High Capacity Tappets
• Multi-layer coated Head Gaskets • Screamin’ Eagle High Performance Cam Bearing
• Cylinder Base and Cam Cover Gaskets • Screamin’ Eagle Stage III Timer Cover & Insert
• Most necessary gaskets and seals • Multi-layer coated Head Gaskets
• Appropriate 119CI or 122CI Timer Cover Medallion and Timer • Cylinder Base and Cam Cover Gaskets
Cover Base • Most necessary gaskets and seals
5 5 • Appropriate 119CI or 122CI Timer Cover Medallion and Timer
SCREAMIN' EAGLE® STAGE III - 107CI TO 119CI KIT Cover Base
Fits '18-later Softail® models equipped with 107CI Milwaukee- A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE III KITS B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE III KITS
Eight engine. FXFB models require separate purchase of BLACK NON-HIGHLIGHTED
Screamin' Eagle® Softail High-Flow Exhaust System P/N's SCREAMIN' EAGLE® STAGE III - 107CI TO 119CI KIT
64900828 or 64900829. Requires separate purchase of Fits ’17-later Touring and ’18-later Softail® models equipped
Cam Drive Retention Kit P/N 25566-06. Installation may Milwaukee-Eight 107 Touring Stock vs. 107-to-119 Stage III Kit with 107CI Milwaukee-Eight® engine. Does not fit Trike models.
require Cam Spacer Kit P/N 25928-06. All models require Requires separate purchase of Cam Drive Retention Kit P/N
ECM calibration with Screamin' Eagle Pro Street Tuner for w/ Street Cannons & Ventilator A/C 25566-06. Installation may require Cam Spacer Kit P/N
proper installation. 25928-06. For ’17-’18 Touring models, installation of Oil Pump
Cover P/N 62400206 is recommended (sold separately).
92500083 Black Non-Highlighted. 150 150 ’17-’19 models require separate purchase of High-Capacity Oil
92500096 Black Highlighted. Pump P/N 62400247. All models require ECM calibration with
SCREAMIN' EAGLE STAGE III - 114CI OR 117CI TO
140 140 Screamin’ Eagle Pro Street Tuner for proper installation.
122CI KIT 92500084 Black Highlighted.
Fits ’18-later Softail® models equipped with 114 or 117CI 130 130
SCREAMIN’ EAGLE
92500097 Black Highlighted. Cover P/N 62400206 is recommended (sold separately).
90 90 ’17-’19 models require separate purchase of High-Capacity Oil
Pump P/N 62400247 for Oil-Cooled models or 62400248 for
80 80 Twin-Cooled models All models require ECM calibration with
Screamin’ Eagle Pro Street Tuner for proper installation. Does
not fit California models.
70 70 92500086 Black Highlighted.
60 60
50 Stock 107 TQ 50
Stock 107 HP
40 40
107-119 Stage III TQ
30 107-119 Stage III HP 30
Street legal and/or street compliant statements refer to 20 20 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 in the United States.
The street legal and/or street compliant statements may 5 The street legal and/or street compliant statements may
not apply to markets outside of the United States. Engine Speed (rpm x 1000) not apply to markets outside of the United States.
A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE III KITS
BLACK HIGHLIGHTED
368 SCREAMIN’ EAGLE® STAGE IV SCREAMIN’ EAGLE® 369
Milwaukee-Eight® Stage IV Upgrade
B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE 5
STAGE IV KIT – 107CI TO 128CI
This Stage IV Kit was designed to deliver maximum horse-
power – all the way to the redline. Features new CNC-ported
heads with 1mm bigger valves and fully machined combus-
tion chambers. Coupled with the kit’s high-lift SE8-517 cam,
high compression pistons and a 64mm throttle body and
intake manifold, this combination delivers a thrilling 126 ft-lb
of torque and 121 HP rear-wheel output when paired with
Screamin’ Eagle® Street Cannon Mufflers.. It’s designed to
run wide open at high-end RPMs and provide a significant
boost of torque from cruising speed. You’ll feel the difference
as soon as you twist the throttle. When installed by an autho-
rized Harley-Davidson® Dealer within 60 days of the vehicle
purchase, compliant kits do not impact the vehicle’s limited
warranty.
• Delivers increased response throughout the entire
RPM range
• Provides thrilling acceleration when twisting the throttle
• Maintains flat torque curve from cruising RPM to redline
• Can be installed without removing the engine from chassis
B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT Fits ’17-’18 Touring models equipped with air/Oil-Cooled
TWIN-COOLED -BLACK HIGHLIGHTED Milwaukee-Eight 107CI engine. Does not fit Trike models.
’17-’19 models require separate purchase of High-Capacity Oil
Pump P/N 62400248. ’17-’18 Screamin’ Eagle High-Capacity
Clutch Plate Kit P/N 37000258. All models require ECM recal-
ibration with the Pro Street Tuner for proper installation.
92500077 Twin-Cooled™
Black Highlighted.
92500078 Oil-Cooled
Black Highlighted.
SCREAMIN’ EAGLE
Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards
in the United States.
5 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT
OIL-COOLED -BLACK HIGHLIGHTED
370 SCREAMIN’ EAGLE® STAGE IV STAGE IV SCREAMIN’ EAGLE® 371
Milwaukee-Eight® Stage IV Upgrade Milwaukee-Eight® Stage IV Upgrade
A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE 5 A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE
STAGE IV KIT 114CI OR 117CI TO 131CI
Go big or go home. With the largest displacement of any
STAGE IV KIT 5
Oil-Cooled:
Harley-Davidson® Stage Kit, this 114CI to 131CI Stage IV Kit Fits ’17-later Touring models equipped with air/Oil-Cooled
was designed to deliver maximum horsepower – all the way Milwaukee-Eight® 114 or 117CI engine. Does not fit Trike
to the redline. Packaged with patent-protected cylinder tech- models. ’17-’19 models require separate purchase of High-
nology, it allows for the largest bolt-on engine upgrade to Capacity Oil Pump P/N 62400247. ’17-’18 Screamin’ Eagle®
any Milwaukee-Eight® motor. Features new CNC-ported High-Capacity Clutch Plate Kit P/N 37000258. All models
heads with 1mm bigger valves and fully machined combus- require ECM recalibration with the Pro Street Tuner for proper
tion chambers. Coupled with the kit’s high-lift SE8-517 cam, installation. Does not fit California models.
high compression pistons and a 64mm throttle body and
intake manifold, this combination delivers a thrilling 131 ft-lb 92500079 Black Highlighted.
of torque and 121 HP rear-wheel output when paired with 92500082 Black Granite.
Screamin’ Eagle® Street Cannon Mufflers.. It’s designed to
run wide open at high-end RPMs and provide a significant
boost of torque from cruising speed. You’ll feel the difference A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE
as soon as you twist the throttle. When installed by an autho- STAGE IV KIT 5
rized Harley-Davidson Dealer® within 60 days of the vehicle Twin-Cooled:
purchase, compliant kits do not impact the vehicle’s limited Fits ’17-later Touring models equipped with Twin-Cooled
warranty. Milwaukee-Eight 114 or 117CI engine. Does not fit Trike models.
• Delivers increased response throughout the entire RPM ’17-’19 models require separate purchase of High-Capacity Oil
range. Pump P/N 62400248. ’17-’18 Screamin’ Eagle High-Capacity
• Provides thrilling acceleration when twisting the throttle. Clutch Plate Kit P/N 37000258. All models require ECM
• Maintains flat torque curve from cruising RPM to redline. recalibration with the Pro Street Tuner for proper installation.
• Can be installed without removing the engine from chassis. Does not fit California models.
92500080 Black Highlighted.
49-State U.S. EPA Compliant on select ’18-later Touring Models. 92500081 Black Granite.
Refer to www.H-D.com/Shop for status.
140 140
130 130
100 100
90 90
80 80
70 70
SCREAMIN’ EAGLE
60 Stock 117CI TQ 60
Stock 117CI HP
50 131 Stage IV w/ 50
Street Cannons TQ
40 40
131 Stage IV w/
30 Street Cannons HP 30
20 20
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Engine Speed (rpm x 1000)
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to products
product meeting 50-State emissions and noise standards meeting EPA (49-State) and/or California (50-State) emissions
in the United States. and noise standards in the United States as specified.
The street legal and/or street compliant statements may 5 The street legal and/or street compliant statements may not
not apply to markets outside of the United States. apply to markets outside of the United States.
A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT – A. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT –
OIL-COOLED – BLACK GRANITE TWIN-COOLED – BLACK HIGHLIGHTED
372 SCREAMIN’ EAGLE® STAGE IV STAGE IV SCREAMIN’ EAGLE® 373
Milwaukee-Eight® Stage IV Upgrade Milwaukee-Eight® Stage IV Upgrade
SCREAMIN' EAGLE® MILWAUKEE-EIGHT® ENGINE 5
STAGE IV KITS B. SCREAMIN' EAGLE® STAGE IV - 114CI OR 117CI TO 5
Go big or go home. With the largest displacement of any 131CI KIT
Harley-Davidson® Stage Kit, this 107CI to 128CI or 114CI to Fits ’18-later Softail® 114CI or 117CI models. FXFBS requires
131CI Stage IV Kit is designed to deliver maximum horse- separate purchase of Screamin’ Eagle® Softail High Flow
power – all the way to the redline. Packaged with patent- Exhaust P/N’s 64900828 or 64900829. Requires sepa-
protected cylinder technology, it allows for the largest bolt-on rate purchase of Cam Drive Retention Kit P/N 25566-06.
engine upgrade to any Milwaukee-Eight motor. Features new Installation may require Cam Spacer Kit P/N 25928-06.
CNC-ported heads with 1mm bigger valves and fully machined ’18-’19 models require separate purchase of High-Capacity Oil
combustion chambers. Coupled with the kit’s high-lift SE8-517 Pump P/N 62400247. FXDR114 models require the separate
cam, high compression pistons and a 64mm throttle body and purchase of 65600300. All models require ECM calibration
intake manifold, this combination delivers a thrilling 135 ft-lb with Screamin’ Eagle Pro Street Tuner for proper installation.
of torque and 124 HP rear-wheel output when paired with Does not fit California models.
the Screamin’ Eagle Street Cannon Mufflers and Ventilator 92500095 114CI to 131CI
Air Cleaner. It’s designed to run wide open at high-end RPMs Black Highlighted.
and provide a significant boost of torque from cruising speed.
You’ll feel the difference as soon as you twist the throttle. When
installed by an authorized Harley-Davidson Dealer within 60
days of the vehicle purchase, compliant kits do not impact the
vehicle’s limited warranty.
• Delivers increased response throughout the entire RPM
range.
• Provides thrilling acceleration when twisting the throttle.
• Maintains flat torque curve from cruising RPM to redline.
• Can be installed without removing the engine from chassis.
SCREAMIN’ EAGLE
90 90 90 90
80 80 80 80
70 70 70 70
60 60 60 60
Street legal and/or street compliant statements refer to products 20 20 20 20 Street legal and/or street compliant statements refer to products
meeting EPA (49-State) and/or California (50-State) emissions meeting EPA (49-State) and/or California (50-State) emissions
and noise standards in the United States as specified. 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 and noise standards in the United States as specified.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) not apply to markets outside of the United States.
374 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 375
High Volume Oil Pump & Cam Support High Volume Oil Pump & Cam Support
A. SCREAMIN' EAGLE® PRO HIGH VOLUME OIL PUMP &
S C R E A M I N ' E AG L E ® H I G H VO L U M E O I L P U M P CAM SUPPORT PLATE KIT
A high-performance Milwaukee-Eight® engine deserves
high-performance oiling. This new kit(s) includes a Super
& CA M S U P P O R T P L AT E K I T Sucker oil pump to improve the oil flow rate to critical
engine components, and a CNC machined billet alumi-
num cam plate for precise alignment of high-performance
cam and chain. It’s the ideal component combination for
a tuned-up Milwaukee-Eight engine. Install and ride hard
with confidence.
A high-performance Milwaukee-Eight® engine deserves high-performance oiling. This new kit includes a Super Sucker oil pump • Heat-treated 6061 billet aluminum cam support plate with
an orange anodized finish is strong and rigid to provide supe-
to improve the oil flow rate to critical engine components, and a CNC machined billet aluminum cam plate for precise alignment rior strength, rigidity, and durability
of a high-performance cam and chain. It’s the ideal component combination for a tuned-up Milwaukee-Eight engine. • CNC-precision machining ensures precise dimensions
and constant material thickness across the plate, enabling
Install and ride hard with confidence. perfect alignment of cams and chains
• Pressed-in 660 bronze cam bushings provide enhanced
wear resistance under increased loads from high-perfor-
mance cams for miles of worry-free riding
2 • Oil pump features a 9% larger gerotor for increased flow at
idle and 33% more scavenge capacity compared to a 2020-
Later Original Equipment oil pump, for increased
1 4 performance, efficiency and engine durability
• The hub-and-spoke oil passage design improves oil flow
rate to critical engine components
• Upgraded filter protection promotes engine durability: Two
screens mounted in both pickups and a magnet in between
the pickups provide extra oil filtering to remove contami-
nants before they can reach critical upper end component
3 62400260
Fits ’17-later models equipped with an Air/Oil-Cooled
Milwaukee-Eight® engine.
62400264
Fits ’17-later models equipped with a Twin-Cooled™
Milwaukee-Eight® engine.
2
B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT®
A. SCREAMIN' EAGLE® PRO HIGH VOLUME OIL PUMP & CAM SUPPORT PLATE KIT – HEADBOLT KIT 2
Details matter when building a high-performance engine.
Details like these Screamin’ Eagle® Milwaukee-Eight® Head
Bolts – made from 8740 chromoly to be 23 percent stronger
than stock bolts. The ideal upgrade for big-displacement and
high-compression racing applications or Stage III or Stage IV
builds. Lock down your top end, for the long run.
• Black oxide finish with Screamin’ Eagle logo provides corro-
sion resistance and showcases performance.
• Premium 8740 chromoly steel bolts provide a 23% increase
in ultimate strength and 23% increase in yield strength
compared to Original Equipment head bolts for desirable
clamp load on a higher-compression engine.
• Cost savings – these bolts may be reused if the top end is
5 disassembled for upgrades or service
• Perfect upgrade during a Screamin’ Eagle® Stage III or
Stage IV installation.
10400069
Fits ’17-later Milwaukee-Eight® engines.
SCREAMIN’ EAGLE
1 6061 BILLET CAM PLATE 2 660 HI-PRO BUSHINGS 3 9% LARGER GEROTOR 4 HI-FLOW OIL PASSAGES 5 ENHANCED FILTERING
The cam support plate and Pressed-in 660 bronze cam and The Super Sucker oil pump The hub-and-spoke oil passage Two screens mounted in both
oil pump are made from heat- pinion shaft bushings provide features a 9% larger gerotor design improves oil flow rate to pickups and a magnet in
treated 6061 billet aluminum enhanced wear resistance under for increased flow at idle and critical engine components by between the pickups provide
with a surface-hardened orange increased loads from high- 33% more scavenge capacity minimizing restrictions extra oil filtering to remove
anodized finish. CNC machining performance cams for miles of compared to a 2020-Later from intersecting passages. potential contaminants before
ensures precise dimensions worry-free riding. Original Equipment oil pump, for they can reach critical upper
and constant material thickness increased performance, efficiency end components. This is key
across the plate and pump, and engine durability. to promoting long life in high-
enabling perfect alignment performance engines.
Street legal and/or street compliant statements refer to products
of components.
meeting EPA (49-State) and/or California (50-State) emissions
and noise standards in the United States as specified.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
B. SCREAMIN' EAGLE® MILWAUKEE-EIGHT® – HEADBOLT KIT
376 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 377
Milwaukee-Eight® Engine Trim Milwaukee-Eight® Engine Trim
A. SCREAMIN’ EAGLE® TIMER COVER INSERTS - STAGE B. SCREAMIN' EAGLE® DERBY COVERS - GLOSS BLACK
KIT LOGO Advertise the goods. This bold new Screamin’ Eagle® derby
Showcase your bike’s performance enhancements with the cover tells the world you’ve taken a Harley-Davidson®
Screamin’ Eagle® Stage Inserts. The Stage Inserts are made Milwaukee-Eight® engine beyond stock. Beautifully finished
to complement the Screamin’ Eagle Timer Cover Base (sold in chrome or gloss black, designed to fit many Touring, Trike
separately). and Softail® models.
Fits ’18-Later Softail® and ’17-later Touring and Trike models • High contrast paint fill pops against derby cover finish while
equipped with Screamin’ Eagle Timer Cover Base P/N red Bar & Shield provides a premium performance look
25600117. • Gloss Black finish matches other dark finishes
1. 25600118 107 Stage I. 25701403
2. 25600119 107 Stage II. Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
3. 25600132 114 Stage I. FLHTKL models. Also fits ’07-later Touring and Trike models
equipped with Narrow-Profile Outer Primary Cover P/N
4. 25600120 114 Stage II. 25700385 or 25700438.
5. 25600121 114 Stage III. 25701407
6. 25600122 114 Stage IV. Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18
7. 25600123 117 Stage II. Softail models equipped with Narrow Profile Primary Cover
8. 25600124 117 Stage III. P/Ns 25701077, 25700913, 25700937, 25700941, 25701039,
25701040 and 25701043.
9. 25600125 117 Stage IV.
10. 25600153 119 Stage III. C. SCREAMIN' EAGLE® DERBY COVERS - CHROME
11. 25600154 122 Stage III. Advertise the goods. This bold new Screamin’ Eagle® derby
12. 25600127 128 Stage IV. cover tells the world you’ve taken a Harley-Davidson®
13. 25600129 131 Stage IV. Milwaukee-Eight® engine beyond stock. Beautifully finished
in chrome or gloss black, designed to fit many Touring, Trike
Shown with: and Softail® models.
14. SCREAMIN’ EAGLE TIMER COVER BASE • Black paint fill pops against derby cover finish while Red Bar
Showcase your bike’s performance enhancements with the & Shield provides a premium performance look
Screamin’ Eagle Timer Cover Base. Start with this black Timer
• Chrome finish matches other bright finishes
Cover and then select a Screamin’ Eagle Stage Upgrade Insert
that matches your engine size and Stage upgrades. (Inserts 25701404
sold separately.) Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
FLHTKL models. Also fits ’07-later Touring and Trike models
25600117
equipped with Narrow-Profile Outer Primary Cover P/N
Fits ’18-later Softail and ’17-later Touring and Trike models.
25700385 or 25700438.
Requires separate purchase of Screamin Eagle Stage Insert.
25701408
2 Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18
Softail models equipped with Narrow Profile Primary Cover
A. SCREAMIN’ EAGLE STAGE INSERTS – 107 STAGE 1 B. SCREAMIN' EAGLE® DERBY COVERS - GLOSS BLACK P/Ns 25701077, 25700913, 25700937, 25700941, 25701039,
(SHOWN ON SCREAMIN’ EAGLE TIMER COVER BASE) 25701040 and 25701043
1 2 3
4 5 6
SCREAMIN’ EAGLE
7 8 9
10 11
14
12 13
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to products
product meeting 50-State emissions and noise standards meeting EPA (49-State) and/or California (50-State) emissions
in the United States. and noise standards in the United States as specified.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN’ EAGLE STAGE INSERTS & TIMER COVER BASE C. SCREAMIN' EAGLE® DERBY COVERS - CHROME
378 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 379
Twin Cam Stage Upgrades Twin Cam Stage Upgrades
STAGE II
TWIN CAM POWERTRAIN STAGE I + CAM UPGRADE
Screamin’ Eagle® Stage upgrades offer complete street-compliant performance configurations Adding performance cams to a Stage I equipped bike is the next step to improved
performance. Cam choices allow you to tailor the engine’s performance to your spe-
engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and cific needs. A torque cam offers on-demand throttle response from low to mid RPM
trial-and-error testing normally associated with engine modifications, Stage upgrades include at cruising speed. A power cam targets high-RPM, wide-open throttle response that
everything you need to enhance your bike’s performance. keeps pulling right up to redline. ECM calibration tuning is required to accommodate
the increased valve timing, and performance valve springs may be required for
high-lift cams.
STAGE III
STAGE I STAGE IV
INTAKE + EXHAUST + TUNING Twin Cam 103 HO Stock vs. 103 HO Stage I STAGE I + CAMS, BIG BORE CYLINDERS, PISTONS,
SCREAMIN’ EAGLE
The easiest and most cost-effective step to improve your motorcycle’s performance 130 130 CYLINDER HEADS & THROTTLE BODY
Corrected Rear Wheel Horsepower (hp)
is to increase the airflow into and out of the engine. A high-flow air cleaner and To maximize the impact of the increased displacement gained with Stage III updates,
120 120
Corrected Rear Wheel Torque (lb-ft)
system-matched slip-on muffles provide horsepower and torque improvements the addition of free-flowing ported cylinder heads and a big bore throttle body top off
you can feel throughout the RPM range, and serve as the core components for 110 110 the performance build. Designed to satisfy the high-RPM, throttle-twisting rider, the
all performance upgrades. ECM calibration is required to tune the fuel flow and Stage IV update delivers 20-30% increase in power that keeps pulling right up to the
100 100
timing required to accommodate the improved airflow. redline, without sacrificing mid-range torque. ECM calibration tuning is required to
90 90 add more fuel, and a higher-lift cam may be required to deliver maximum power.
A. SCREAMIN’ EAGLE HEAVY BREATHER ELITE PERFORMANCE AIR CLEANER KIT – B. SCREAMIN’ EAGLE HEAVY BREATHER PERFORMANCE AIR CLEANER KIT –
FULL GLOSS BLACK GLOSS BLACK
SCREAMIN’ EAGLE
2
B. SCREAMIN’ EAGLE HEAVY BREATHER
PERFORMANCE AIR CLEANER KIT – CHROME
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN’ EAGLE HEAVY BREATHER ELITE PERFORMANCE AIR CLEANER KIT B. SCREAMIN’ EAGLE HEAVY BREATHER AIR B. SCREAMIN’ EAGLE HEAVY BREATHER
CLEANER KIT – COMPACT PERFORMANCE AIR CLEANER KIT –
GLOSS BLACK
382 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 383
Twin Cam Stage I Upgrade Twin Cam Stage I Upgrade
A. SCREAMIN’ EAGLE® HEAVY BREATHER E. SCREAMIN’ EAGLE® VENTILATOR ELITE 2
FILTER COVER – TEARDROP AIR CLEANER KIT
Dress up the Heavy Breather Air Cleaner with this radical This low-profile oval air cleaner features a 360° exposed filter
cover. Manufactured from forged aluminum and precision element and a cast back plate designed to provide maxi-
CNC-machined and polished, these easy-to-install two-piece mum airflow to the throttle body. This easy-to-install air
covers add a rich custom look. Cover is available in mirror- cleaner produces significant performance gains, while the
chrome or cut back gloss black finish to match your custom- sleek center bar design cover with carbon fiber inserts add
izing direction. Kit includes water-repellent rain sock. a luxurious touch. This complete kit includes low-profile air
cleaner cover, high-flow filter element, back plate, diamond-
Fits models equipped with Screamin’ Eagle Heavy Breather cut Screamin’ Eagle® medallion, protective rain sock and all
Air Cleaner Kits on Twin-Cam and XL model. (except Compact required installation hardware. Street compliant when used
Heavy Breather P/N 28716-10A, Heavy Breather Elite P/N with stock mufflers. 50-State U.S. EPA compliant.
29400173, 29400172 or 29400285, and Milwaukee-Eight®
Heavy Breather P/N 29400263 or 29400264). Fits ’16-’17 FXDLS and Softail® and ’09-’16 Touring and Trike
29400061A Cut Back Gloss Black – Side Logo. models. Also fits ’11-’17 CVO™ Softail models. All EFI models
require ECM calibration for proper installation. ’17 models
28739-10A Cut Back Gloss Black – End Logo.
A. SCREAMIN’ EAGLE HEAVY BREATHER FILTER COVER – require recalibration with Screamin’ Eagle Pro Street Tuner
28740-10A Chrome – End Logo. TEARDROP, CUT BACK GLOSS BLACK – SIDE LOGO (sold separately).
29400217 Chrome.
B. SCREAMIN’ EAGLE HEAVY BREATHER DECORATIVE
ENDCAP – WILLIE G SKULL 29400218 Gloss Black.
Add a sinister touch to your Heavy Breather Air Cleaner. Fits ’16-’17 FXDLS and Softail, ’14-’17 CVO Softail and ’14-’16
Chrome-plated self-adhesive cover features a forward-facing Touring and Trike models equipped with Screamin’ Eagle
Willie G Skull medallion. 58mm Throttle Body. All models require ECM calibration
28720-10 E. SCREAMIN’ EAGLE VENTILATOR ELITE AIR CLEANER KIT – CHROME for proper installation. ’17 models require recalibration with
Fits models equipped with Screamin’ Eagle Heavy Breather Screamin’ Eagle Pro Street Tuner (sold separately).
Air Cleaner Kits (except Compact Heavy Breather P/N 28716- 29400219 Chrome.
10A, Heavy Breather Elite P/N 29400173, 29400172 or
29400230 Gloss Black.
29400285, and Milwaukee-Eight Heavy Breather P/N
29400263 or 29400264). Also available:
SCREAMIN’ EAGLE VENTILATOR ELITE
C. SCREAMIN’ EAGLE HEAVY BREATHER
AIR CLEANER COVER
DECORATIVE MEDALLION
Add a luxurious finishing touch to your Ventilator Air Cleaner.
Add the finishing touch to your Heavy Breather Air Cleaner
Designed as a direct replacement for the Screamin’ Eagle and
by installing this medallion. Featuring a bright chrome-plated
CVO Ventilator Air Cleaners, this easy-to-install cover features
die-cast base and contrasting black inlay with diamond-cut
a sleek center bar design surrounded with carbon fiber inserts.
Screamin’ Eagle script. Easy to install.
Kit includes low-profile cover, diamond-cut Screamin’ Eagle
29017-09 medallion and chrome mounting hardware.
Fits models equipped with Screamin’ Eagle Heavy Breather
Air Cleaner Kits (except Compact Heavy Breather P/N 28716- Fits ’10-’17 Dyna®, ’09-’16 Softail, ’09-’16 Touring and Trike
10A, Heavy Breather Elite P/N 29400173, 29400172 or A. SCREAMIN’ EAGLE HEAVY BREATHER FILTER A. SCREAMIN’ EAGLE HEAVY BREATHER FILTER models equipped with Ventilator Air Cleaner Kits. Also
29400285, and Milwaukee-Eight Heavy Breather COVER – TEARDROP, CHROME COVER – TEARDROP, CUT BACK GLOSS BLACK fits Dyna High Output 103 and CVO models with Original
P/N 29400263 or 29400264). Equipment Ventilator Air Cleaner.
61300516 Chrome.
D. THROTTLE BODY COVER 61300517 Gloss Black.
This cover dresses the area between the Twin Cam cylinders
for a custom look. The formed cover hugs the contour and
conceals the electronic control module throttle body for a
F. SCREAMIN’ EAGLE VENTILATOR 2
PERFORMANCE AIR CLEANER KIT
clean appearance. Available in your choice of mirror chrome Stylish low-profile exposed element air cleaner kit provides
or gloss black finish. Easy-to-install kit includes gaskets. increased airflow to boost the power of your fuel-injected
Fits ’14-’15 FLSTNSE, ’11-’12 FLSTSE, ’13-’14 FXSBSE, and engine. The track-inspired exposed element adds a purposeful
’16-’17 FXDLS and Softail®, ’08-’16 Touring and Trike models look to the bike and the included waterproof rain sock protects
equipped with Screamin’ Eagle Heavy Breather or Burst Air the filter during inclement weather. This easy-to-install kit
Cleaner Kit. 2 includes low-profile air cleaner cover, high-flow filter element,
back plate, Screamin’ Eagle badge, protective rain sock and all
61300109 Chrome. required installation hardware. 50-State U.S. EPA compliant.
61300110 Gloss Black.
E. SCREAMIN’ EAGLE VENTILATOR ELITE AIR E. SCREAMIN’ EAGLE VENTILATOR ELITE AIR
CLEANER KIT – GLOSS BLACK CLEANER KIT Fits ’10-’17 Dyna (except ’16-’17 FXDLS), and ’10-’15 Softail
models (except ’14-’15 FLSTNSE, ’11-’12 FLSTSE and ’13-’14
FXSBSE). All models require ECM calibration for proper instal-
lation. ’17 models require recalibration with Screamin’ Eagle
Pro Street Tuner (sold separately).
28721-10 Chrome.
SCREAMIN’ EAGLE
B. SCREAMIN’ EAGLE HEAVY BREATHER C. SCREAMIN’ EAGLE HEAVY BREATHER 28722-10 Gloss Black.
DECORATIVE ENDCAP – WILLIE G SKULL DECORATIVE MEDALLION
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
D. THROTTLE BODY COVERS F. SCREAMIN’ EAGLE VENTILATOR F. SCREAMIN’ EAGLE VENTILATOR
PERFORMANCE AIR CLEANER KIT – PERFORMANCE AIR CLEANER KIT –
CHROME GLOSS BLACK
384 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 385
Twin Cam Stage I Upgrade Twin Cam Stage I Upgrade
A. SCREAMIN’ EAGLE® HIGH-FLOW 2 B. SCREAMIN’ EAGLE® EXTREME BILLET 2
AIR CLEANER – TWIN CAM AIR CLEANER KIT
The High-Flow Air Cleaner Kit provides increased airflow to The forged billet aluminum cover tops off a cast back plate
boost the power of your fuel-injected model. Kit features a with integral breather for a smooth transition to the throttle
one-piece cast back plate with integral breather and mounting body. The race-inspired air cleaner is engineered to flow high
brackets for simplified installation and a synthetic washable volumes of air and the washable pleated element provides
air cleaner element that does not require oiling. Available with the ideal combination of efficiency and engine protection.
a brilliant chrome or black back plate, this round air cleaner Available in your choice of style and finish, this easy-to-install
element can be dressed with most Original Equipment or kit includes all mounting hardware and rain sock. 50-State U.S.
accessory air cleaner covers. Or choose to flaunt your perfor- EPA compliant.
mance gains with the open element look, and finish it off with
a Rain Sock Kit P/N 28728-10 and custom Air Cleaner Trim Fits ’16-’17 FXDLS and Softail® and ’08-’16 Touring and Trike
from one of the Harley-Davidson® decorative collections. This models with Original Equipment 50mm Throttle Body. All
kit includes air cleaner, back plate, breather and all required models require ECM calibration for proper installation. ’17
hardware. 50-State U.S. EPA compliant. models require recalibration with Screamin’ Eagle® Pro Street
Tuner (sold separately).
Fits ’16-’17 Softail® and ’14-’16 Touring and Trike models 29400064 Agitator – Chrome.
(except CVO™ Touring) with Original Equipment 50mm
29400063 Agitator – Cut Back Gloss Black.
Throttle Body. All models require ECM calibration for proper
installation. ’17 models require recalibration with Screamin’ 29400104 Chisel – Chrome.
Eagle® Pro Street Tuner (sold separately). 29400103 Chisel – Cut Back Gloss Black.
29400234 Chrome.
29400233 Texture Black.
2 Fits ’16-’17 FXDLS and Softail, ’14-’17 CVO™ Softail and ’14-’16
Touring and Trike models equipped with Screamin’ Eagle
58mm Throttle Body. All models require ECM calibration
Fits ’08-’15 Softail models (except CVO Softail). Also fits A. HIGH-FLOW AIR CLEANER KIT – CHROME A. HIGH-FLOW AIR CLEANER KIT – BLACK B. EXTREME BILLET AIR CLEANER KIT – B. EXTREME BILLET AIR CLEANER KIT – for proper installation. ’17 models require recalibration with
’08-’17 Dyna® models (except ’16-’17 FXDLS) equipped with (29400234 SHOWN) (29400233 SHOWN) AGITATOR, CHROME AGITATOR, CUT BACK GLOSS BLACK Screamin’ Eagle Pro Street Tuner (sold separately).
accessory Air Cleaner Cover. Also fits ’04-’07 EFI Dyna, ’01-’07
EFI Softail, and ’02-’07 EFI Touring. FXS, FLS, FLSTSB and 29400221 Chisel – Chrome.
’13-’17 FXDB models require separate purchase of Gasket P/N 29400220 Chisel – Cut Back Gloss Black.
29591-99 and Screw P/N 29703-00. All models require ECM
calibration for proper installation. ’17 models require recalibra- Fits ’08-’17 Dyna® (except ’16-’17 FXDLS), and ’08-’15 Softail
tion with Screamin’ Eagle Pro Street Tuner (sold separately). models (except ’14-’15 FLSTNSE, ’11-’12 FLSTSE and ’13-’14
FXSBSE). All models require ECM calibration for proper instal-
29400240 Chrome. lation. ’17 models require recalibration with Screamin’ Eagle
29400239 Texture Black. Pro Street Tuner (sold separately).
Fits ’08-’15 Dyna models with Original Equipment Teardrop Air 29400116 Chisel – Cut Back Gloss Black.
Cleaner Cover. All models require ECM calibration for proper 29400117 Chisel – Chrome.
installation.
NOTE: The washable and rechargeable filter uses a special
29400236 Chrome. coating to help filter fine particles from the incoming air. With
29400235 Texture Black. time, the oil in the filter will dissipate and the element will
begin to turn gray. The original red color can be restored with
Fits ’08-’13 Touring and Trike models (except CVO Touring)
an application of K&N® Air Filter Oil.
with Original Equipment 50mm throttle body. All models
require ECM calibration for proper installation.
29400238 Chrome.
29400237 Texture Black.
Fits ’16-’17 FXDLS and Softail, ’14-’17 CVO Softail, and ’14-’16
Touring and Trike models equipped with Screamin’ Eagle
58mm EFI Throttle Body. Requires separate purchase of an
Accessory Air Cleaner Cover. All models require ECM calibra-
tion for proper installation. ’17 models require recalibration
with Screamin’ Eagle Pro Street Tuner (sold separately).
29400222 Raw Aluminium. 2
A. HIGH-FLOW AIR CLEANER KIT – BLACK A. HIGH-FLOW AIR CLEANER KIT – CHROME B. EXTREME BILLET AIR CLEANER KIT – B. EXTREME BILLET AIR CLEANER KIT –
(29400239 SHOWN) (29400240 SHOWN) CHISEL, CHROME CHISEL, CUT BACK GLOSS BLACK
SCREAMIN’ EAGLE
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. HIGH-FLOW AIR CLEANER KIT – BLACK A. HIGH-FLOW AIR CLEANER KIT – CHROME B. EXTREME BILLET AIR CLEANER KIT B. EXTREME BILLET AIR CLEANER KIT
(29400235 SHOWN) (29400236 SHOWN) (SHOWN WITH RAIN SOCK)
386 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 387
Twin Cam Stage I Upgrade Twin Cam Stage I Upgrade
A. SCREAMIN’ EAGLE® AIR CLEANER TRIM D. SCREAMIN’ EAGLE® STREET PERFORMANCE 2
Dress your air cleaner in the traditional H-D orange and black. SLIP-ON MUFFLERS – DYNA® SHORTY DUAL
Easy-to-install trim features Screamin’ Eagle script set against Factory engineers tuned these pipes to satisfy the most
a gloss black background. discriminating Harley enthusiast. Mufflers feature high-
61300299 flowing internals to maximize performance and a rich, deep
Fits ’16-’17 Softail® (except FLSTFBS and FXSE) and ’14-’16 exhaust note that lets everyone know you’re around. With the
Touring and Trike models with Original Equipment air cleaner aggressive sound quality and performance comparable to
cover. Does not fit CVO™ models. Screamin’ Eagle® II race-use mufflers, it’s hard to believe they
are street compliant. Available in your choice of rich chrome
29503-07
or heat-resistant jet black ceramic finish. Jet black mufflers
Fits ’07 Dyna®, ’07-’15 Softail (except FLSTSB and FXS), ’07-
include matching muffler shield with a deep embossed
’13 Touring and Trike models models with Original Equipment
Screamin’ Eagle logo along the flank. Chrome mufflers allow
air cleaner cover.
for the reuse of stock muffler shields or the separate purchase
of Chrome “Screamin’ Eagle” Script Muffler Shields. 50-State
B. SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK U.S. EPA compliant.
Add the open-element look to your Screamin’ Eagle® High-
Flow style Air Cleaner. This easy-to-install kit allows you 80794-10A Jet Black w/ Muffler Shields.
D. SCREAMIN’ EAGLE STREET PERFORMANCE SLIP-ON SHORTY DUAL MUFFLERS –
to replace the traditional Original Equipment air cleaner Fits ’07-’17 FXDB, ’07-’10 FXD, ’07-’14 FXDC, ’07-’13 FXDL and
JET BLACK WITH MUFFLER SHIELDS (SHOWN WITH JET BLACK EXHAUST SHIELD KIT)
cover with custom inserts from one of the H-D® Decorative ’07-’08 FXDWG models with Shorty Dual exhaust. Installation
Collections. Kit includes a breathable mesh cover with clas- requires separate purchase of Muffler Clamps
sic Bar & Shield logo that stretches over the filter to maximize P/N 65296-95A (Qty 2). All models require ECM calibration
airflow while protecting the exposed element from the rain. for proper installation. ’17 models require recalibration with
Fits traditional cone-shaped air cleaner elements featured in Screamin’ Eagle Pro Street Tuner (sold separately).
many Screamin’ Eagle Twin Cam Stage Kits.
28728-10 A. SCREAMIN’ EAGLE AIR CLEANER TRIM A. SCREAMIN’ EAGLE AIR CLEANER TRIM E. SCREAMIN’ EAGLE® STREET CANNON SLIP-ON 2
(61300299 SHOWN) (29503-07 SHOWN) MUFFLERS – SOFTAIL® SHOTGUN
Fits Screamin’ Eagle Round High-Flow Air Cleaner Kits. These 3.25" street compliant high-flow mufflers have been
specifically tuned to deliver an aggressive exhaust note and
C. SCREAMIN’ EAGLE AIR CLEANER 2 improved performance while preserving the peace with your
BACK PLATE KITS neighbors. Available in your choice of rich chrome or heat
Finished in brilliant chrome or wrinkle black, these replace- resistant jet black ceramic finish. The Jet Black mufflers
ment back plates complement the finish of your engine. Cast include Screamin’ Eagle® muffler shields. Complete the look
back plate design features integral breather and mounting with your choice of 3.25" endcaps (sold separately). 50-State
brackets for simplified installation. U.S. EPA compliant.
Fits models equipped with Screamin’ Eagle High-Flow Air 64900334 Jet Black w/Muffler Shields.
Cleaner Kits. Installation may require separate purchase of Fits ’07-’17 FLS, FLSTN and FLSTSB models equipped with
(2) O-Ring P/N 11292, (2) Breather Tube P/N 29557-05 and Shotgun exhaust. Does not fit FLSS. Installation requires
(2) Breather Screw P/N 29465-99. See your Dealer for details. separate purchase of 3.25" End Caps and Muffler Clamps
P/N 65296-95A (Qty 2). All models require ECM calibration
Fits ’99-’07 Dyna, ’99-’15 Softail (except ’11-later CVO) and for proper installation. ’17 models require recalibration with
’02-’07 Touring models. Screamin’ Eagle Pro Street Tuner (sold separately).
E. SCREAMIN’ EAGLE STREET CANNON SLIP-ON MUFFLERS – SOFTAIL SHOTGUN, JET BLACK
29510-05 Chrome. (SHOWN WITH JET BLACK SLASH END CAPS AND EXHAUST SHIELDS) 64900341 Jet Black w/Muffler Shields.
29586-06 Wrinkle Black. Fits ’07-’17 FLSTF, FLSTFB and FXS models equipped with
Shotgun exhaust. Installation requires separate purchase of
Fits ’08-’15 Dyna®, ’08-’13 Touring and Trike models with 3.25" End Caps and Muffler Clamps P/N 65296-95A (Qty 2).
Original Equipment Teardrop Air Cleaner Cover. All models require ECM calibration for proper installation. ’17
29624-08 Chrome. models require recalibration with Screamin’ Eagle Pro Street
29319-08 Wrinkle Black. Tuner (sold separately).
SCREAMIN’ EAGLE
P/N 65296-95A (Qty 2). All models require ECM calibration
F. SCREAMIN’ EAGLE STREET CANNON SLIP-ON MUFFLERS – SOFTAIL SHORTY DUAL, JET BLACK for proper installation. ’17 models require recalibration with
(SHOWN WITH SATIN BLACK END CAPS AND JET BLACK EXHAUST SHIELDS) Screamin’ Eagle Pro Street Tuner (sold separately).
Street legal and/or street compliant statements refer to Multi-Fit ’08-’13 Touring ’08-’15 Dyna Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may 2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
C. SCREAMIN’ EAGLE AIR CLEANER BACK PLATE KITS G. MUFFLER END CAPS – 3.25"
388 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 389
Twin Cam Stage I Upgrade Twin Cam Stage I Upgrade
A. JET BLACK EXHAUST SHIELD KIT – G. SCREAMIN’ EAGLE® STREET CANNON 2
DYNA SHORTY DUAL PERFORMANCE SLIP-ON MUFFLERS – 4.0"
Extend the custom look along the bike’s entire profile. These Cue the orchestra. We tuned these mufflers to provide an
formed steel exhaust shields are available in a unique jet black exhaust note with some extra deep bass. You get the rumble
ceramic finish that complements jet black Screamin’ Eagle® you want and enhance that famous Harley sound, while
Street Performance Slip-On Mufflers. This exhaust shield kit preserving the peace with your neighbors. The tuned baffles
has survived stringent Harley-Davidson testing for durability work with the large internal volume to strike the perfect
and corrosion resistance. Manufactured to Original Equipment balance required to deliver performance that you can feel
standards for exact fit, the easy-to-install kit includes front in your gut. The large 4.0" diameter Street Cannons provide
and rear head pipe shields. free flow of exhaust gases with just the right amount of back
80821-10 $161.95 pressure for a smooth-running ride. The die-cast Screamin’
Fits ’06-’10 FXD, ’06-’17 FXDB, ’06-’14 FXDC, ’06-’13 FXDL Eagle® medallion adds a rich touch to your bike’s profile and
and ’06-’08 FXDWG models with shorty dual exhaust. a large selection of end cap designs are available (sold sepa-
rately) to provide the perfect finishing touch. 50-State U.S.
2 EPA compliant.
B. JET BLACK EXHAUST SHIELD KIT –
DYNA STAGGERED DUAL G. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE MUFFLERS – CHROME Fits ’09-’16 Touring and ’09-later Trike models (except CVO™
Add a custom touch to your ride. These formed steel exhaust (SHOWN WITH BILLET TAPERED SLASH END CAPS) models and ’10 FLHX and FLTRX models). Installation requires
shields are available in a tough jet black ceramic that looks separate purchase of 4" end caps and Muffler Clamps
just right when paired with jet black Screamin’ Eagle Street P/N 65296-95A (Qty 2). All models require ECM calibration
Performance Slip-On Mufflers. The jet-black coating adds a for proper installation. ’17-later Trike models require recalibra-
sinister look to your bike’s profile. The slotted “Tommy gun” tion with Screamin’ Eagle Pro Street Tuner (sold separately).
cutouts expose the head pipe for a raw, rebellious attitude.
Manufactured to Original Equipment standards for exact fit, 64900186B Chrome.
this easy-to-install kit includes front and rear head pipe shields. 64900187B Jet Black.
A. JET BLACK EXHAUST SHIELD KIT B. JET BLACK EXHAUST SHIELD KIT – DYNA
65247-09 STAGGERED DUAL
Fits ’08-’17 FXDF and ’10-’17 FXDWG models with forward H. MUFFLER END CAPS – 4"
controls. These End Cap Kits allow you to personalize your Screamin’
Eagle Street Performance Touring Mufflers. Available in your
choice of styles, these easy-to-install caps are dressed with
C. SCREAMIN’ EAGLE® SLASH CUT MUFFLER SHIELDS – the same finish as the mufflers and exhaust shields for a
SATIN BLACK consistent look front to back. Sold in pairs, the kit includes all
Shaped to mirror the slash down profile of available muffler required mounting hardware.
end caps, this set of rich satin black Muffler Shields is the
perfect complement to your blacked-out exhaust system. Fits ’09-’16 Touring and ’09-later Trike models equipped with
The rear shield features a subtle laser-etched Screamin’ Eagle Screamin’ Eagle Street Cannon 4" End Cap Mufflers. Does not
script. Easy-to-install kit includes front and rear shields and fit 4" CVO Touring mufflers.
black mounting hardware. 65100016 Revolver.
65400405 Satin Black. 2 65100019 Slash Up/Down/Out.
Fits ’07-later XL, ’07-’17 Dyna® (except ’08-’17 FLD, FXDF, 65100017 Fishtail.
FXDL, FXDLS and ’10-’17 FXDWG) and ’07-’17 Softail® models G. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE MUFFLERS – JET BLACK 65100028 Satin Black Anodized.
equipped with Screamin’ Eagle Street Performance mufflers. (SHOWN WITH BLUNT REVOLVER END CAPS) 80611-09 Blunt Revolver.
D. SCREAMIN’ EAGLE SLASH CUT MUFFLER SHIELDS –
I. SHORT SLASH UP/DOWN/OUT 4" MUFFLER
CHROME
END CAPS
Styled to complement the ballistic inlet shape of the Screamin’ Slash Up/
Fishtail These End Cap Kits allow you to personalize your Screamin’
Eagle Street Performance Slip-On Mufflers. The slash-cut rear Down/Out
Revolver Eagle® Street Performance Touring Mufflers. The Short Slash
shield features a laser-etched Screamin’ Eagle signature
Up/Down/Out End Caps are 2" shorter than our traditional
script. Easy-to-install kit includes front and rear shields and
Slash Cut End Caps, and keep the mufflers tucked in close to
mounting hardware.
the saddlebag or Trike model rear valance for a clean custom
65400464 Chrome. look. Sold in pairs, the kit includes all required mounting
Fits ’07-later XL, ’07-’17 Dyna (except ’08-’17 FLD, FXDF, hardware.
FXDL, FXDLS and ’10-’17 FXDWG) and ’07-’17 Softail models
65100062
equipped with Screamin’ Eagle Street Performance Mufflers.
Fits ’09-’16 Touring and ’09-later Trike models equipped with
Screamin’ Eagle Street Cannon 4" End Cap Mufflers. Does
E. SCREAMIN’ EAGLE MUFFLER SHIELDS not fit 4" CVO™ Touring mufflers.
Styled to complement the ballistic inlet shape of the Screamin’ C. SCREAMIN’ EAGLE SLASH CUT MUFFLER D. SCREAMIN’ EAGLE SLASH CUT MUFFLER Blunt Revolver Satin Black Anodized
Eagle Street Performance Slip-On Mufflers. The rear shield SHIELDS – SATIN BLACK SHIELDS – CHROME
J. MUFFLER BRACKET COVER KIT
features a deep embossed Screamin’ Eagle signature script. Stamped-steel cover conceals the Original Equipment exhaust
Available in chrome and jet black. Easy-to-install kit includes brackets. Contoured for a custom fit, these easy-to-install
front and rear shields and mounting hardware. covers add a distinctive finishing touch. Available in mirror-
65400078 Jet Black. chrome or black finish to match your customizing style (sold
Fits ’07-later XL, ’07-’17 Dyna (except ’08-’17 FLD, FXDF, FXDL in pairs).
SCREAMIN’ EAGLE
and ’10-later FXDWG) and ’07-’17 Softail models equipped 80716-08 Chrome.
with Screamin’ Eagle Street Performance Mufflers. H. MUFFLER END CAPS – 4"
Fits ’97-’13 Touring models. Fits Screamin’ Eagle Street
Performance Touring 4" Mufflers (except P/N 64900093 and
F. JET BLACK EXHAUST SHIELD KIT – TOURING 64900091). Does not fit with Fishtail 4.0" Muffler End Cap
Available for 2-into-1 and 2-into-2 exhaust systems, these P/N 65100017. Does not fit with Screamin’ Eagle 3.5"
formed steel exhaust shields feature a unique jet black Mufflers.
ceramic coating that complements the jet black Screamin’
Eagle Street Cannon Slip-On Mufflers. The jet black coating
maintains its uniform black finish and has survived stringent
Harley-Davidson testing for durability and corrosion resis-
tance. Manufactured to Original Equipment standards for
exacting fit, the easy-to-install kit includes front and rear head
pipe shields.
64981-09
Fits ’09-’16 Touring and Trike models (except ’10 NOTE: There is no warranty on exhaust pipes and mufflers
FLHX and FLTRX). with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
E. SCREAMIN’ EAGLE MUFFLER SHIELDS F. JET BLACK EXHAUST SHIELD KIT – TOURING I. SHORT SLASH UP/DOWN/OUT – J. MUFFLER BRACKET COVER KIT – CHROME
4" MUFFLER END CAPS
390 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 391
Twin Cam Stage II Upgrade
B. SCREAMIN’ EAGLE® PREMIUM TAPERED 2
QUICK-INSTALL ADJUSTABLE PUSHRODS
TWIN CAM STAGE II UPGRADE These premium pushrods are tapered for enhanced clearance
at the cylinder head, allowing the use of higher lift cams. The
one-piece chrome moly tube adds rigidity and durability and
the threaded adjustment feature provides easy cam instal-
Camshafts are a fundamental ingredient in the performance recipe, lation without removing the cylinder heads or rocker boxes.
because they control the timing and duration of all major engine To simplify adjustment, the tube features six flats, with one
flat marked with a large dot for tracking the adjustment. The
events. They are the primary means by which you can tune your threaded rod features 4 flats to reduce wrench swing. Each
engine’s horsepower and torque output. Every cam has unique lift pushrod features the Screamin’ Eagle logo and is marked for
“Intake” or “Exhaust.” Kit includes 4 pushrods and required
and overlap performance characteristics, which means you need pushrod tubes.
to select cams based on exactly the kind of power you’re looking for.
Fits ’99-’17 Twin Cam-equipped models.
17900032 With Gloss Black Covers.
18404-08 With Chrome Covers.
purchase of Performance Valve Spring Kit P/N 18013-03A. All models require ECM
calibration for proper installation. Labor cost not included. See Dealer for details. 110 110 in gloss black and the kit includes four bottom cover tubes
and the four upper clips. Installation retains the Original
100 100
Equipment chrome short center tube to create a high-contrast
SE-585 CAM KIT
This cam is a great match for riders of heavy Touring bikes looking for big torque at the low
90 90 2 2 accent. Cover Kit can be installed on engines already equipped
80 80 with Adjustable Pushrods or can be installed by removing
end. Just a quick downshift to fourth gear results in an effortless pass of that slow-moving
C. SCREAMIN’ EAGLE HIGH-CAPACITY TAPPETS D. SCREAMIN’ EAGLE PERFORMANCE rocker box covers, rocker arms and non-adjustable pushrods.
tractor-trailer ahead of you. This cam provides an early hit of torque at the low end of the 70 70 VALVE SPRING KIT Consult your dealer or service manual for installation.
RPM spectrum. A unique combination of lift, cam lobe duration and an enhanced cam profile
60 60 17900033 Covers Only.
ramp provides a performance boost you can feel. The cam’s QRD (Quiet Ramp Design) deliv-
ers high torque throughout the RPM range while reducing valve train noise. 50-State U.S. EPA 50 50 Fits ’99-’17 Twin Cam-equipped models. Requires prior
compliant. Stock 103CI TQ installation of Adjustable Pushrods or removal of rocker box
40 40
Stock 103CI HP covers, rocker arms and fixed-length pushrods.
25400117 103CI with SE259E TQ
30 30
For use on ’14-’16 Touring models with the use of a 58mm Throttle Body. Also fits ’14-’16
SCREAMIN’ EAGLE
103CI with SE259E HP F. PUSHROD TUBE COLLARS – GLOSS BLACK
CVO™ Touring models with or without the use of a 58mm Throttle Body. Does not fit Trike 20 20
models. Installation requires separate purchase of Performance Valve Spring Kit P/N 18013- 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Manufactured from Original Equipment components for
03A. All models require ECM calibration for proper installation. Labor cost not included. See perfect fit and function, these Pushrod Collars complete your
Engine Speed (rpm x 1000) Twin Cam engine’s conversion to the total blacked-out look.
Dealer for details.
Covers replace the chrome-finished factory covers, and fit
with stock or Screamin’ Eagle Quick-Install Pushrods.
Twin Cam HO103CI Stock vs. 17900076
103CI Stage II with SE-585 Cam
Fits ’84-’00 Evolution® 1340 and ’99-’17 Twin Cam-equipped
130 130 models. Installation requires use of Adjustable Pushrods or
Corrected Rear Wheel Horsepower (hp)
120 120 removal of rocker box covers, rocker arms and fixed-length
Corrected Rear Wheel Torque (lb-ft)
pushrods.
110 110
100 100
SCREAMIN’ EAGLE
models. FEATURES
Twin Cam 103HO Stock vs. 103CI High Compression Kits Twin Cam 103HO Stock vs. 103 to 110CI Stage III
with Cams & Street Cannon Mufflers with SE CVO Mufflers
130 130 130 130
90 90 90 90
SCREAMIN’ EAGLE
80 80 80 80
70 70 70 70
60 60 60 60
50 50 50 50
40
Stock 103HO TQ
40 40 Stock 103HOCI TQ 40
Stock 103HO HP Stock 103HOCI HP
103CI Stage III (SE585) TQ 30 110 Stage III (SE585) TQ 30
30 103CI Stage III (SE585) HP
30 110 Stage III (SE585) HP
20 20 20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
396 SCREAMIN’ EAGLE® STAGE III STAGE III SCREAMIN’ EAGLE® 397
Twin Cam Stage III Upgrade Twin Cam Stage III Upgrade
SCREAMIN’ EAGLE® TWIN CAM CONVERSION KIT SCREAMIN’ EAGLE® TWIN CAM CONVERSION 2
WITH CAMS – 96CI TO 103CI KIT – 96CI TO 103CI
The Stage II Big Bore Kit provides the parts you need to This Big Bore Kit lets you increase the displacement of your
increase the horsepower of your EFI-equipped model. The kit Twin Cam 96™ engine-equipped model from 96 cubic inches
increases the displacement of your Twin Cam-equipped model (1584cc) to 103 cubic inches (1690cc). A high-performance
from 96 cubic inches (1584cc) to 103 cubic inches (1690cc). clutch spring is included to provide the additional clutch
50-State U.S. EPA compliant. California kits are street compli- capacity required by the extra torque. 50-State U.S. EPA
ant on California pollution controlled vehicles when used with Compliant.
Original Equipment mufflers.
Kit includes:
Kit includes: Big Bore Cylinders
Big Bore Cylinders Big Bore Flat Top Pistons and Rings
Big Bore Flat Top Pistons and Rings High-Flow Air Cleaner with One-Piece Back Plate
SE-255 Cams Top End Gasket Kit
High-Flow Air Cleaner Kit with One-Piece Back Plate Heavy Duty Clutch Spring
Top End Gasket Kit
Heavy Duty Clutch Spring 29903-07A Black Highlighted.
Fits all ’07 Twin Cam and ’08-’11 Softail® models equipped
27543-08 Black Highlighted. with a Twin Cam 96™ engine. Installation requires separate
Fits ’10-’11 Softail® models equipped with a Twin Cam 96™ purchase of Primary Cover Gasket. Cam Drive Retention Kit
engine. Also fits ’08-’09 California Softail models. Installation P/N 25566-06. Cam Spacer Kit P/N 25928-06 is
requires separate purchase of Primary Cover Gasket. Cam recommended. All models require ECM calibration for proper
Drive Retention Kit P/N 25566-06. Cam Spacer Kit P/N installation.
25928-06 is recommended. All models require ECM 27539-08A Black Highlighted (not shown).
calibration for proper installation. 26 Fits ’08-’11 Touring models equipped with a Twin Cam 96
27557-08 Black Highlighted. engine. Installation requires separate purchase of Primary
Fits ’10-’11 Touring models equipped with Twin Cam 96 Cover Gasket. Cam Drive Retention Kit P/N 25566-06. Cam
engine. Also fits ’08-’09 California Touring models. ’10 FLHX Spacer Kit P/N 25928-06 is recommended. All models
and FLTRX models require separate purchase of 2-into-2 require ECM calibration for proper installation.
Head Pipe and mufflers. Installation requires separate
purchase of Primary Cover Gasket. Cam Drive Retention Kit
P/N 25566-06. Cam Spacer Kit P/N 25928-06 is NOTICE: Installation of automatic or manual compression
recommended. All models require ECM calibration for releases on large displacement engines is highly recommended.
proper installation. 26
27564-09A Black Highlighted.
Fits 49-state ’09 Touring models. Kit includes catalyst When installed by an authorized Harley-Davidson® Dealer
head pipe. Does not fit Trike models. Not street compliant in within 60 days of the vehicle purchase, compliant kits do
California. Installation requires separate purchase of Primary 26 2 not impact the vehicle’s limited warranty.
Cover Gasket. Cam Drive Retention Kit P/N 25566-06. Cam
Spacer Kit P/N 25928-06 is recommended. All models
require ECM calibration for proper installation. 5
NOTICE: Installation of a California performance kit onto a Twin Cam 96 Stock vs. 96 to 103CI Conversion
49-state model motorcycle or a 49-state performance with Street Use Exhaust Twin Cam 96 Stock vs. 96 to 103CI Conversion
kit onto a California model motorcycle will void
manufacturer’s warranty, as it will not result in a street 130 130 130 130
compliant configuration.
120 120 120 120
When installed by an authorized Harley-Davidson® Dealer
90 90 90 90
SCREAMIN’ EAGLE
80 80 80 80
70 70 70 70
60 60 60 60
50 50 50 50
Stock 96CI TQ Stock 96CI TQ
40 40 40 Stock 96CI HP
40
Stock 96CI HP
103CI Stage III (SE255) TQ 103CI Stage III TQ
30 103CI Stage III (SE255) HP
30 30 103CI Stage III HP 30
20 20 20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
398 SCREAMIN’ EAGLE® STAGE IV STAGE IV SCREAMIN’ EAGLE® 399
Twin Cam Stage IV Upgrade Twin Cam Stage IV Upgrade
SCREAMIN’ EAGLE® TWIN CAM TIRE 2 SCREAMIN’ EAGLE® TWIN CAM CONVERSION 2
SHREDDER KIT – 103CI TO 110CI KIT – 103CI TO 110CI
This comprehensive kit provides a complete package of Bring your Twin Cam motorcycle up to the same 110-cubic-
matched components that allow you to build a high-perfor- inch displacement and power output as the CVO™ Screamin’
mance 110CI Twin Cam without voiding the factory warranty. Eagle® models without expensive machining or removing the
The unique Screamin’ Eagle® 4.0" big bore cylinders are engi- engine from the chassis. This street compliant kit combines
neered to slip into the engine cases without case machining the proven SE-255 cams and cylinder heads of the CVO model
or modification, so the engine stays in the chassis during the with exclusive Screamin’ Eagle bolt-on 4.0" cylinders and
build. 50-State U.S. EPA compliant. system-matched pistons to deliver high torque and reliable
everyday performance. The automatic compression release-
Kit includes: equipped cylinder heads and the flat top forged pistons
Screamin’ Eagle 4.0" Bolt-On Cylinders combine to develop a 9.3:1 compression ratio for easy start-
Forged 10.2:1 High Compression Pistons and Rings ing, and the Screamin’ Eagle lifters ensure quiet reliable valve
Screamin’ Eagle 58mm Throttle Body train operation. 50-State U.S. EPA compliant.
High Flow Fuel Injectors (5.3 g/s)
Kit includes:
Screamin’ Eagle CNC-Ported Cylinder Heads
Screamin’ Eagle 4.0" Bolt-On Cylinders
SE-259E Cams
Forged 9.3:1 Compression Pistons and Rings
Perfect-Fit Pushrods
CVO 110 Cylinder Heads
Screamin’ Eagle High-Capacity Roller Tappets
SE-255 Cams
Top End and Cam Cover Gaskets
High-Capacity Roller Tappets
Heavy Duty Clutch Spring
Top End and Cam Cover Gaskets
92500038 Heavy Duty Clutch Spring
Fits ’14-’16 Touring models. Does not fit Twin-Cooled™ Cam Spacer Kit P/N 25928-06 is recommended
models. Does not fit Trike models, CVO™ 110 models or
models with engine cases that have been machined to 92500031 Black Highlighted.
accept large-bore cylinders. Requires separate purchase of Fits ’10-’16 Touring models (except ’14-’16 models with
accessory 58mm air cleaner and Cam Drive Retention Kit Twin-Cooled™ engines). Does not fit Trike models, CVO 110
P/N 25566-06. Cam Spacer Kit P/N 25928-06 is models, or models with engine cases that have been
recommended. All models require recalibration with machined to accept large bore cylinders. Requires separate
Screamin’ Eagle Pro Street Tuner (sold separately). purchase of Screamin’ Eagle high-flow air cleaner. ’10 FLHX
and FLTRX models require separate purchase of 2-into-2
Head Pipe Kit and Mufflers. ’11-’16 Touring models require
When installed by an authorized Harley-Davidson® Dealer installation of CVO Mufflers P/N 64768-09A and 64769-09A
within 60 days of the vehicle purchase, compliant kits do or FatShotz Muffler Kit P/N 80847-10 (sold separately). ’10-
not impact the vehicle’s limited warranty. ’11 Touring models require ACR Harness P/N 70623-08.
Installation requires separate purchase of Primary Cover
2 2
Gasket. Cam Drive Retention Kit P/N 25566-06. Cam Spacer
Kit P/N 25928-06 is recommended. All models require ECM
calibration for proper installation.
92500032 Black Highlighted.
Fits ’14-’16 FLHTCU, FLHTCUL, FLHTK, FLHTKL and FLTRU
models with Twin-Cooled engines. Does not fit Trike models,
CVO 110 models, or models with engine cases that have been
machined to accept large bore cylinders. Requires separate
purchase of Screamin’ Eagle high-flow air cleaner. Installation
requires separate purchase of Primary Cover Gasket. Cam
Drive Retention Kit P/N 25566-06. Cam Spacer Kit P/N
Twin Cam 103HO Stock vs. 103 to 110CI Tire Shredder Kit Twin Cam 103HO Stock vs. 103 to 25928-06 is recommended. All models require ECM
with Heavy Breather & Street Cannon Mufflers 110CI Stage IV Conversion Kit calibration for proper installation.
92500033 Black Highlighted.
130 130 130 130 Fits ’11-’17 Dyna® FXD, FXDB and FXDC models equipped
with Shorty Dual Exhaust. Installation requires separate
120 120 120 120 purchase of Muffler P/N 64895-09 (Qty 2). Also fits 50-state
’10-’17 FXDF and FXDWG models. FXDF and FXDWG models
SCREAMIN’ EAGLE
machined to accept large-bore cylinders.). Requires separate
80 80 80 80 purchase of Screamin’ Eagle high-flow air cleaner. ’11 Softail
models require ACR Harness P/N 70623-11. Installation
70 70 70 70
requires separate purchase of Primary Cover Gasket. Cam
Drive Retention Kit P/N 25566-06. Cam Spacer Kit P/N
25928-06 is recommended. All models require ECM
60 60 60 60 calibration for proper installation. ’17 models require
recalibration with Screamin’ Eagle Pro Street Tuner (sold
separately).
50 50 50 50
40 Stock 103HOCI TQ
40 Stock 103HOCI TQ
Stock 103HOCI HP
40 Stock 103HOCI HP
40 When installed by an authorized Harley-Davidson® Dealer
within 60 days of the vehicle purchase, compliant kits do
Stage IV Tire Shredder TQ 110CI Stage IV TQ not impact the vehicle’s limited warranty.
30 Stage IV Tire Shredder HP
30 30 30
110CI Stage IV HP
20 20 20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
400 SCREAMIN’ EAGLE® STAGE IV STAGE IV SCREAMIN’ EAGLE® 401
Twin Cam Stage IV Upgrade Twin Cam Stage IV Upgrade
SCREAMIN’ EAGLE® TWIN CAM STAGE IV KIT – 2 SCREAMIN’ EAGLE® TWIN CAM BOLT-ON 2
103CI TO 103CI 110CI TO 117CI KIT
This Street Performance kit provides the maximum horse- Turn your Original Equipment 110-cubic-inch model into a fast,
power output for a legal 103 Kit that will maintain the factory reliable 117-cubic-inch Twin Cam hauler without having to
warranty. The Air-Cooled Street Performance Kit produces 96 remove the motor from the chassis. This Street Performance
hp and 105 lbs-ft of torque. The Twin-Cooled™ engine version Kit combines system-matched Screamin’ Eagle® big bore
is rated at 93 hp and 100 lbs-ft of torque. 50-State U.S. EPA cylinders, forged pistons and performance cams and valve
compliant. train components with the Original Equipment cylinder heads
for a cost-effective boost in torque and performance. The
Kit includes: exclusive bolt-on 4.125" cylinders are engineered with high-
Forged 10.5:1 High Compression Pistons and Rings strength slim-wall spigots that slip into the factory 110CI
Screamin’ Eagle® 58mm Throttle Body crank case without any additional machining. The 4.125" flat
Screamin’ Eagle CNC Ported Cylinder Heads top pistons team with the stock cylinder heads to produce
SE-259E Cams a performance-enhancing 9.9:1 compression ratio, and the
Perfect-Fit Pushrods high-lift SE-259E cam produces a boost in torque throughout
Top End Gasket Kit the RPM range. 50-State U.S. EPA compliant.
Heavy Duty Clutch Spring Kit includes:
92500011 Black Highlighted. Screamin’ Eagle 4.125" Bolt-On Cylinders
Fits ’16-’17 Softail® (except FLSS, FLSTFBS and FXSE) and Forged 9.9:1 Compression Pistons and Rings
’10-’16 Touring models (except ’14-’16 models with Twin- Screamin’ Eagle 58mm Throttle Body
Cooled engines) equipped with a Twin Cam 103™ engine. Fits High Flow Fuel Injectors (5.3 g/s)
49-state ’10-’11 Touring models equipped with a Twin Cam SE-259E Cams
96™ engine with separate purchase of Screamin’ Eagle 3-7/8" Perfect-Fit Pushrods
Big Bore Cylinder Kit. ’10 FLHX and FLTRX requires dual Screamin’ Eagle High-Capacity Roller Tappets
exhaust. Does not fit Trike models. Installation requires Screamin’ Eagle Inner Cam Bearing Kit
separate purchase of Primary Cover Gasket. Cam Drive
Top End and Cam Cover Gaskets
Retention Kit P/N 25566-06. Cam Spacer Kit P/N 25928-06
is recommended. All models require ECM calibration for Fits ’14-’17 CVO™ 110CI Softail® and ’14-’16 CVO Touring
proper installation. ’17 models require recalibration with models. Also fits ’16-’17 110CI FLSS, FLSTFBS and FXDLS
Screamin’ Eagle Pro Street Tuner (sold separately). models. Requires purchase of accessory 58mm air cleaner
and Cam Drive Retention Kit P/N 25566-06 (except
models equipped with Screamin’ Eagle Heavy Breather
Elite Performance Air Cleaner Kits). Models equipped with
Ventilator Air Cleaner require separate purchase of 58mm Air
Cleaner Backplate P/N 29400038. All models require ECM
2 calibration for proper installation. ’16-’17 FXDLS and all ’17
models require recalibration with Screamin’ Eagle Pro Street
2 Tuner (sold separately).
92500055 Granite Finish.
When installed by an authorized Harley-Davidson® Dealer 92500054 Black Finish.
within 60 days of the vehicle purchase, compliant kits do
not impact the vehicle’s limited warranty.
When installed by an authorized Harley-Davidson® Dealer
within 60 days of the vehicle purchase, compliant kits do
not impact the vehicle’s limited warranty.
Air-Cooled Twin-Cooled™ Twin Cam CVO™ 110CI Stock vs 110 to 117CI Stage IV
Twin Cam 103HO Stock vs. 103CI Stage IV with Twin Cam 103HO Stock vs. 103CI Stage IV with
Heavy Breather & Street Cannon Mufflers Heavy Breather & Street Cannon Mufflers
with Ventilator Air Cleaner & SE CVO Mufflers
130 130 130 130 130 130
120 120 120 120 120 120
Corrected Rear Wheel Horsepower (hp)
110 110
80 80 80 80 90 90
SCREAMIN’ EAGLE
70 70 70 70 80 80
60 60 60 60 70 70
50 50 50 50
60 60
40 Stock 103HOCI TQ 40 40 Stock 103HOCI TQ 40
Stock 103HOCI HP Stock 103HOCI HP
103HOCI Stage IV TQ 103HOCI Stage IV TQ 50 Stock CVO 110CI TQ 50
30 30 30 30
103HOCI Stage IV HP 103HOCI Stage IV HP Stock CVO 110CI HP
20 20 20 20 40 40
117 Bolt-on Kit TQ
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
30 117 Bolt-on Kit HP 30
Engine Speed (rpm x 1000) Engine Speed (rpm x 1000)
20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
Engine Speed (rpm x 1000) The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
402 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 403
Sportster® Stage Upgrades Sportster® Stage Upgrades
STAGE II
®
SPORTSTER POWERTRAIN STAGE I + CAM UPGRADE
Screamin’ Eagle® Stage upgrades offer complete street-compliant performance configurations Adding performance cams to a Stage I equipped bike is the next step to improved
performance. Cam choices allow you to tailor the engine’s performance to your
engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and specific needs. A torque cam offers on-demand throttle response from low to
trial-and-error testing normally associated with engine modifications, Stage upgrades include mid RPM at cruising speed. A power cam targets high-RPM, wide-open throttle
everything you need to enhance your bike’s performance. response that keeps pulling right up to redline. ECM calibration tuning is required to
accommodate the increased valve timing, and performance valve springs may be
required for high-lift cams.
120 120
90 90
80 80
70 70
60 60
50 50
40 40
Stage II upgrade requires minor engine disassembly
30 30
to replace the cam. Special tools and ECM tuning
20 20 are required.
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Engine Speed (rpm x 1000)
STAGE IV
all performance upgrades. ECM calibration is required to tune the fuel flow and 1200 SE Stage I TQ
SCREAMIN’ EAGLE
timing required to accommodate the improved airflow. 1200 SE Stage I HP 130 130
100 100
120 120
90 90
70 70
80 80
60 60
70 70
50 50 60 60
40 40 50 50
Stage IV bolt-on upgrade requires removal of the
30 30 40 40 engine’s top end and opening the cam chest.
30 30 Engine remains in the chassis and no machining is
20 20 required. Special tools and ECM tuning are required.
20 20
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Street legal and/or street compliant statements refer to product meeting 50-State 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
emissions and noise standards in the United States. Engine Speed (rpm x 1000) Engine Speed (rpm x 1000) Street legal and/or street compliant statements refer to product meeting 50-State
The street legal and/or street compliant statements may not apply to markets emissions and noise standards in the United States.
* 14-later XL1200 Stage II with Heavy Breather A/C * 1200 Stage IV with High-Flow A/C
outside of the United States. The street legal and/or street compliant statements may not apply to markets
& Street Cannon Mufflers & Street Cannon Mufflers
outside of the United States.
404 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 405
Sportster® Stage I Upgrade Sportster® Stage I Upgrade
A. SCREAMIN’ EAGLE® HEAVY BREATHER 2 C. SCREAMIN’ EAGLE® PERFORMANCE 2
PERFORMANCE AIR CLEANER KIT AIR CLEANER KIT – RAIL COLLECTION
This high-flow forward-facing exposed element Air Cleaner Kit The look is bold and the performance exhilarating. This race-
is sure to turn heads at the starting line. Featuring a polished inspired air cleaner is engineered to flow through the perim-
elbow and exposed filter, this unique air cleaner system offers eter and the face of the air filter, providing high volumes of
improved performance and airflow when compared to the unrestricted airflow to the engine. The open-design face plate
stock or Screamin’ Eagle® High-Flow Air Cleaner. The wash- features a rich black finish with machined longitudinal strakes
able and rechargeable filter features a bright chrome end cap to expose the glowing aluminum below. Kit includes air cleaner
with a laser-engraved Screamin’ Eagle logo. Intake tube and trim, one-piece cast back plate, high-flow washable air filter
back plate are made from die-cast lightweight aluminum and element, rain sock and all required hardware. 50-State U.S.
are polished and chrome-plated or painted black for a brilliant EPA compliant.
finish. The back plate features integral breathers and sealed 29400232A
breather bolt plug. Kit includes a water-repellent rain sock and Fits ’07-later XL models with Original Equipment throttle
all mounting hardware. 50-State U.S. EPA compliant. body. All models require ECM calibration for proper
Fits ’08-later XL models with Original Equipment Throttle installation. ’17-later models require recalibration with
Body. All models require ECM calibration for proper instal- Screamin’ Eagle® Pro Street Tuner (sold separately). Pending
A. SCREAMIN’ EAGLE HEAVY BREATHER PERFORMANCE AIR CLEANER KIT – CHROME
lation. ’17-later models require recalibration with Screamin’ approval for use in California on ’21 models. Refer to H-D.
Eagle® Pro Street Tuner (sold separately). Pending approval com/shop for status.
for use in California on ’21 models. Refer to H-D.com/shop for
status. D. SCREAMIN’ EAGLE EXTREME BILLET 2
AIR CLEANER KIT
29264-08A Chrome.
29080-09A Gloss Black.
2 The bold styling of this intake system looks just as impres-
sive as the long patch of burnout rubber you just laid down.
The forged billet aluminum cover tops off a cast back plate
Fits ’14-later XL1200 model equipped with Screamin’ Eagle C. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER KIT – RAIL COLLECTION
with integral breather for a smooth transition to the throttle
High Flow 58mm Throttle Body. All models require ECM
body. The race-inspired air cleaner is engineered to flow high
calibration for proper installation. ’17-later models require
volumes of air and the washable pleated element provides
recalibration with Screamin’ Eagle Pro Street Tuner (sold
the ideal combination of efficiency and engine protection.
separately).
Available in your choice of style and finish, this easy-to-install
29400228A Chrome. kit includes all mounting hardware and rain sock. 50-State U.S.
29400227A Gloss Black. EPA compliant.
NOTE: The washable and rechargeable filter uses a special Fits ’07-later XL models with Original Equipment throttle body.
coating to help filter fine particles from the incoming air. With All models require ECM calibration for proper installation.
time, the oil in the filter will dissipate and the element will ’17-later models require recalibration with Screamin’ Eagle®
begin to turn gray. The original red color can be restored with Pro Street Tuner (sold separately). Pending approval for use
an application of K&N® Air Filter Oil. in California on ’21 models. Refer to H-D.com/shop for status.
29400128 Chisel – Chrome.
B. SCREAMIN’ EAGLE HEAVY BREATHER
29400127 Chisel – Cut Back Gloss Black.
FILTER COVER – TEARDROP
Dress up the Heavy Breather Air Cleaner with this radical A. SCREAMIN’ EAGLE HEAVY BREATHER PERFORMANCE AIR CLEANER KIT – GLOSS BLACK NOTE: The washable and rechargeable filter uses a special
cover. Manufactured from forged aluminum and precision coating to help filter fine particles from the incoming air. With
CNC-machined and polished, these easy-to-install two-piece time, the oil in the filter will dissipate and the element will
covers add a rich custom look. Cover is available in mirror- begin to turn gray. The original red color can be restored with
chrome or cut back gloss black finish to match your custom- an application of K&N® Air Filter Oil.
izing direction. Kit includes water-repellent rain sock.
Fits models equipped with Screamin’ Eagle Heavy Breather
Air Cleaner Kits on Twin-Cam and XL model. (except Compact
Heavy Breather P/N 28716-10A, Heavy Breather Elite P/N
29400173, 29400172 or 29400285, and Milwaukee Eight
Heavy Breather P/N 29400263 or 29400264).
29400061A Cut Back Gloss Black – Side Logo.
28739-10A Cut Back Gloss Black – End Logo.
2
28740-10A Chrome – End Logo.
D. EXTREME BILLET AIR CLEANER KIT – CHISEL, CHROME
SCREAMIN’ EAGLE
B. SCREAMIN’ EAGLE HEAVY BREATHER FILTER COVER –
TEARDROP, CUT BACK GLOSS BLACK – SIDE LOGO
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
B. SCREAMIN’ EAGLE B. SCREAMIN’ EAGLE D. EXTREME BILLET AIR CLEANER KIT – CHISEL, CUT BACK GLOSS BLACK
HEAVY BREATHER FILTER COVER – HEAVY BREATHER FILTER COVER –
TEARDROP, CHROME TEARDROP, CUT BACK GLOSS BLACK
406 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 407
Sportster® Stage I Upgrade Sportster® Stage I Upgrade
A. SCREAMIN’ EAGLE® OVAL HIGH-FLOW 2 D. SCREAMIN’ EAGLE® STREET CANNON SLIP-ON 2
AIR CLEANER MUFFLERS – SPORTSTER® SHORTY DUAL
The XL High-Flow Air Cleaner Kit provides increased airflow to These 3.25’’ street compliant high-flow mufflers have been
boost the power of your fuel-injected Sportster® model. The specifically tuned to deliver an aggressive exhaust note and
complete kit features a composite air cleaner back plate, air improved performance while preserving the peace with your
cleaner cover adapter, a high-flow washable synthetic media neighbors. Available in your choice of rich chrome or heat-
filter element that does not require oiling and a breather resistant jet black ceramic finish. Complete the look with your
system that routes gasses and excess oil directly into the choice of 3.25’’ endcaps and Screamin’ Eagle® Muffler shields
intake. Kit also includes cover trim and all mounting hardware. (sold separately).
Street compliant when used with stock mufflers. 50-State U.S.
EPA compliant. Fits ’14-later XL models. Installation requires separate
purchase of 3.25" End Caps and Muffler Clamps P/N
29782-07 65900012 (Qty 2). All models require ECM calibration for
Fits ’07-later XL models with Original Equipment throttle proper installation. ’17-later models require recalibration with
body and oval air cleaner cover. All models require ECM 2 Screamin’ Eagle® Pro Street Tuner (sold separately). Pending
calibration for proper installation. ’17-later models require approval for use in California on ’21 models. Refer to H-D.com/
recalibration with Screamin’ Eagle Pro Street Tuner (sold shop for status.
D. SCREAMIN’ EAGLE STREET CANNON SLIP-ON MUFFLERS –
separately). Pending approval for use in California on ’21
SPORTSTER SHORTY DUAL, CHROME 64900208A Chrome.
models. Refer to H-D.com/shop for status.
(SHOWN WITH CHROME SLASH END CAPS AND BUCKSHOT EXHAUST SHIELDS) 64900209A Jet Black.
B. SCREAMIN’ EAGLE ROUND HIGH-FLOW 2 Fits ’17-’20 XL1200 models. Designed for International
AIR CLEANER markets that require ECM certified mufflers. Mufflers include
The XL High-Flow Air Cleaner Kit provides increased airflow 2 2 matching slash down end caps. Installation requires separate
to boost the power of your fuel-injected Sportster model.
purchase of Muffler Clamps P/N 65900012 (Qty 2).
Available with brilliant chrome or gloss black back plate,
A. SCREAMIN’ EAGLE OVAL HIGH-FLOW AIR CLEANER 64900477 Chrome.
this Round Air Cleaner transforms the appearance of your
Evolution powerplant and allows you to replace the Original 64900476 Jet Black.
Equipment oval air cleaner cover with your choice of acces-
sory round covers. Or choose to flaunt your performance gains E. SCREAMIN’ EAGLE STREET PERFORMANCE 2
with the open element look, finished with custom Air Cleaner SLIP-ON MUFFLERS – SPORTSTER SHORTY DUAL
Trim from one of the Harley-Davidson® decorative collections. Street compliant high-flow mufflers are factory tuned to
Kit includes one-piece cast back plate, high-flow washable deliver an aggressive exhaust note and improved perfor-
air filter element and all required hardware. Street compliant mance comparable to Screamin’ Eagle II mufflers. Available in
when used with stock mufflers. 50-State U.S. EPA compliant. your choice of rich chrome or heat-resistant jet black ceramic
finish, these mufflers feature a deep embossed Screamin’
Fits ’07-later XL models with Original Equipment throttle Eagle logo along the flank. 50-State U.S. EPA compliant.
body and round air cleaner cover or round air cleaner Trim.
Proper installation with round air cleaner cover requires Fits ’07-’13 XL models. Installation requires separate purchase
separate purchase of Air Cleaner Filter Gasket P/N 25700127. of Muffler Clamps P/N 65296-95A (Qty 2).
All models require ECM calibration for proper installation. 2 80503-07 Chrome.
’17-later models require recalibration with Screamin’ Eagle®
Pro Street Tuner (sold separately). Pending approval for use D. SCREAMIN’ EAGLE STREET CANNON SLIP-ON MUFFLERS – 80726-09A Jet Black.
in California on ’21 models. Refer to H-D.com/shop for status. SPORTSTER SHORTY DUAL, JET BLACK
(SHOWN WITH JET BLACK SLASH END CAPS AND BUCKSHOT EXHAUST SHIELDS)
29000019A Chrome.
29000009A Black.
SCREAMIN’ EAGLE
E. SCREAMIN’ EAGLE STREET PERFORMANCE SLIP-ON SHORTY DUAL MUFFLERS – CHROME
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
C. SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK E. SCREAMIN’ EAGLE STREET PERFORMANCE SLIP-ON SHORTY DUAL MUFFLERS – JET BLACK
(SHOWN WITH #1 SKULL AIR CLEANER TRIM) (SHOWN WITH JET BLACK BUCKSHOT EXHAUST SHIELDS)
408 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 409
Sportster® Stage I Upgrade Sportster® Stage I Upgrade
A. MUFFLER END CAPS – 3.25" E. SLOTTED EXHAUST SHIELD KIT
These easy-to-install caps allow you to finish your 3.25" Add a custom touch to your ride. These formed steel exhaust
Screamin’ Eagle mufflers your way. Sold in pairs. Installation shields are available in tough heat-resistant satin black or
hardware included. bronze finishes that look just right when paired with black
Screamin’ Eagle® Street Cannon Slip-On Mufflers. The slotted
Fits ’14-later XL and ’07-’17 Softail® models equipped with cutouts are backed with textured stainless inserts to provide
Screamin’ Eagle 3.25" Street Cannon Mufflers. a raw, handcrafted look. Manufactured to Original Equipment
65100048A Satin Black Anodized. standards for exact fit, these easy-to-install kits include front
65100044 Chrome – Slash Up/Down/Out. and rear head pipe shields.
65100063 Jet Black – Slash Up/Down/Out. 65400422 Satin Black.
Fits ’14-later XL models.
B. JET BLACK HEADER PIPES
Hide the blue. These Original Equipment-style Header Pipes F. BUCKSHOT EXHAUST SHIELD KIT
have been finished with a unique jet black heat-resistant These custom shields feature a perforated “Buckshot” design
coating and are a great accent to both chrome and black that exposes the head pipe for a raw, rebellious look. Available
Buckshot exhaust shields. When exposed through the holes A. MUFFLER END CAPS – 3.25" in your choice of finishes, these exhaust shields are a perfect
in the Buckshot shields, the black header pipe provides a sinis- (SATIN BLACK ANODIZED SHOWN) match for Original Equipment or Screamin’ Eagle mufflers and
ter accent and hides the heat-tempered finish of the typical provide a consistent look from front to back. Manufactured
exhaust pipe. Easy to install using factory mounting hardware, to Original Equipment standards for exacting fit, the easy-to-
the kit includes front and rear header pipe. install kit includes front and rear head pipe shields.
65600155 65400137A Jet Black.
Fits ’14-later XL models. Does not fit international models. Jet Black Fits ’14-later XL models.
Chrome Slash Slash
C. SCREAMIN’ EAGLE® SLASH-CUT MUFFLER SHIELDS – E. SLOTTED EXHAUST SHIELD KIT – SATIN BLACK G. SCREAMIN’ EAGLE® MUFFLER SHIELDS
SATIN BLACK Styled to complement the ballistic inlet shape of the Screamin’
Shaped to mirror the slash down profile of available muffler Eagle Street Performance Slip-On Mufflers. The rear shield
end caps, this set of rich satin black Muffler Shields is the features a deep embossed Screamin’ Eagle signature script.
perfect complement to your blacked-out exhaust system. Available in chrome and jet black. Easy-to-install kit includes
The rear shield features a subtle laser-etched Screamin’ Eagle front and rear shields and mounting hardware.
script. Easy-to-install kit includes front and rear shields and 65400078 Jet Black.
black mounting hardware. Fits ’07-later XL, ’07-’17 Dyna® (except ’08-’17 FLD, FXDF,
65400405 Satin Black. FXDL and ’10-later FXDWG) and ’07-’17 Softail® models
Fits ’07-later XL, ’07-’17 Dyna® (except ’08-’17 FLD, FXDF, equipped with Screamin’ Eagle Street Performance Mufflers.
FXDL, FXDLS and ’10-’17 FXDWG) and ’07-’17 Softail® models
equipped with Screamin’ Eagle Street Performance mufflers. Satin Black
Anodized
D. SCREAMIN’ EAGLE SLASH-CUT MUFFLER SHIELDS –
CHROME
Styled to complement the ballistic inlet shape of the Screamin’
Eagle Street Performance Slip-On Mufflers. The slash-cut rear A. MUFFLER END CAPS – 3.25"
shield features a laser-etched Screamin’ Eagle signature
script. Easy-to-install kit includes front and rear shields and
mounting hardware.
65400464 Chrome.
Fits ’07-later XL, ’07-’17 Dyna® (except ’08-’17 FLD, FXDF,
FXDL, FXDLS and ’10-’17 FXDWG) and ’07-’17 Softail models
equipped with Screamin’ Eagle Street Performance Mufflers.
SCREAMIN’ EAGLE
B. JET BLACK HEADER PIPES
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may The street legal and/or street compliant statements may
not apply to markets outside of the United States. not apply to markets outside of the United States.
C. SCREAMIN’ EAGLE SLASH-CUT MUFFLER D. SCREAMIN’ EAGLE SLASH-CUT MUFFLER F. BUCKSHOT EXHAUST SHIELD KIT – G. SCREAMIN’ EAGLE MUFFLER SHIELDS
SHIELDS – SATIN BLACK SHIELDS – CHROME JET BLACK
(64924-09 SHOWN)
410 SCREAMIN’ EAGLE® STAGE II STAGE IV SCREAMIN’ EAGLE® 411
Sportster® Stage II Upgrade Sportster® Stage IV Upgrade
A. SCREAMIN’ EAGLE® PERFORMANCE II SE-585 SCREAMIN’ EAGLE® SPORTSTER® CONVERSION 2
CAM KIT– SPORTSTER® KIT – 883CC TO 1200CC*
The high-lift full throttle cam kit provides significant horse- Make your Iron 883™ model roar. This complete conversion
power gains when coupled with high-flowing exhaust and kit will alter the personality of your 883-equipped Sportster®
intake components, and is a great fit for full-throttle horse- model. Designed to bring your XL883 model up to XL1200
power junkies. 50-State U.S. EPA compliant. (exception below). specifications. No case machining is required for installation.
25400125 50-State U.S. EPA compliant.
Fits ’14-later XL1200 models. Requires installation of Kit includes:
Performance Cylinder Heads P/N 16500074 or 16500347, or
Sportster High-Flow Air Cleaner Kit
upgrade of Original Equipment heads with Performance
Valve Spring Kit P/N 18013-03A. All models require ECM XL1200 Cylinder Heads
calibration for proper installation. ’17-later models require XL1200 Cylinders
recalibration with Screamin’ Eagle® Pro Street Tuner (sold XL1200 Pistons and Rings
separately). Pending approval for use in California on '21- Heavy Duty Clutch Spring
later models. Top End Gasket Kit
2
Corrected Rear Wheel Torque (lb-ft)
Stock 1200 TQ
110 Stock 1200 HP 110
Stock 883 TQ
70 70 90 90
60 60
SCREAMIN’ EAGLE
50 50
80 80
40 40 70 70
30 30
20 20 60 60
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Engine Speed (rpm x 1000) 50 50
* 14-later XL1200 Stage II with Heavy Breather
A/C & Street Cannon Mufflers 40 40
30 30
20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. Engine Speed (rpm x 1000) in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
* 883 to 1200 Conversion with Street Cannon Mufflers
B. SCREAMIN’ EAGLE HIGH-CAPACITY TAPPETS C. SCREAMIN’ EAGLE PERFORMANCE
VALVE SPRING KIT
412 SCREAMIN’ EAGLE® STAGE IV SCREAMIN’ EAGLE® 413
Sportster® Stage IV Upgrade
SCREAMIN’ EAGLE® SPORTSTER® STAGE IV KIT – 2
1200CC TO 1200CC
Maximize the horsepower and torque available for your street
compliant Sportster® model. This complete engine package
includes all the components you need to build a high-perfor-
SCREAMIN’ EAGLE® MULTI-FIT ACCESSORIES
mance ride while still retaining the original factory warranty. When building a performance powertrain, don’t overlook the small stuff. After
Installation does not require removal of the powertrain
from the chassis. 50-State U.S. EPA compliant. Pending all, good clean air and a powerful spark are essential for maximum power
regulatory approval for ’20-’22 models. Refer to the prod- and engine life. Air cleaner covers and washable K&N® air filters are available
uct information at www.H-D.com/shop for status.
to dress your bike in style while maximizing the flow of air to your engine, and
Kit includes:
CNC-Ported Cylinder Heads with Performance Valve Springs Screamin’ Eagle® premium spark plugs and plug wires will keep the fire burning.
Screamin’ Eagle® XL SE-585 Cams
Forged Hi-Compression 10.5:1 Pistons and Rings
58mm Throttle Body and Intake Manifold
Top End Gasket Kit
Fits ’14-later XL1200 models. Requires separate purchase of
58mm compatible accessory air cleaner. All models require
ECM calibration for proper installation. ’17-later models
require recalibration with Screamin’ Eagle Pro Street Tuner
(sold separately). Pending approval for use in California on ’21
-later models. Refer to H-D.com/shop for status.
92500041 Black Highlighted Heads.
92500042 Black Non-Highlighted Heads.
130 130
120 120
Stock 1200 HP
1200 Stage IV TQ
100 1200 Stage IV HP 100
90 90
SCREAMIN’ EAGLE
80 80
70 70
60 60
50 50
40 40
30 30
20 20
Street legal and/or street compliant statements refer to 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
product meeting 50-State emissions and noise standards
in the United States. Engine Speed (rpm x 1000)
The street legal and/or street compliant statements may
not apply to markets outside of the United States. * 1200 Stage IV with 58MM Heavy Breather A/C
& Street Cannon Mufflers
414 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 415
Air Filters 1 2 3 Spark Plugs
2 2
Terminal Construction ensures solid
A. SCREAMIN’ EAGLE® HIGH-FLO K&N® B. SCREAMIN’ EAGLE® PERFORMANCE
watertight connection with standard or
REPLACEMENT AIR FILTER ELEMENT performance spark plug wires. SPARK PLUGS
K&N® replacement air filters are engineered to improve airflow Screamin’ Eagle® Spark Plugs feature double platinum coat-
for increased horsepower and quicker acceleration. K&N ing for superior erosion resistance and extended life. The “V”
filters provide excellent filtration, and because they are wash- trimmed ground electrode reduces shrouding of the flame
able and reusable, you can clean the filter whenever condi- front to promote flame propagation, and the fine wire center
tions demand. Designed as direct replacements for specified electrode enhances startups and ignitability. Screamin’
fitments. Eagle Plugs feature Ribbed Core Technology (RCT) that
1. 29400020 High-Flow – Multi-fit. provides resistance to fouling, and are designed with Original
Fits ’07-later XL, ’99-’07 Dyna®, ’00-’15 Softail® and ’99-’07 Built-In Suppressor/Resistor reduces Equipment-style noise suppression to prevent electrical inter-
radio noise and interference. ference with radios and CB communication equipment. Works
Touring models equipped with High-Flow Air Cleaner Kits.
Replacement for P/N 29442-99E. great in racing applications where rich air/fuel conditions are
required. Unique style with Screamin’ Eagle logo. Sold in pairs.
1. 29400358 High-Flow – Multi-fit. 4 5 6
Fits ’18-later Softail and ’17-later Touring and Trike models Standard Compression Applications
equipped with round High-Flow Air Cleaner P/N 29400355 or Designed for modified engines including performance carbu-
29400356. retors, high-flow air cleaners, camshafts, exhaust systems and
2. 29400021 High-Flow – Dyna. ignition systems in conjunction with stock compression ratios.
Fits ’08-’17 Dyna models equipped with High-Flow Air 31600106 Standard Compression Applications.
Cleaner Kits. Replacement for P/N 29385-08. Fits ’99-later Twin Cam-equipped models, and ’86-later
3. 29400019 High-Flow – Touring. Evolution® Sportster® 883, 1100 and 1200 models.
Fits ’16-’17 Softail and ’08-’16 Touring and Trike models Plated Jacket helps prevent 31600085 Standard Compression Applications.
equipped with High-Flow Air Cleaner Kits. Replacement for corrosion in harsh weather and Fits ’15-’20 XG models and ’17-later Milwaukee-Eight® engine
P/N 29244-08. temperature conditions. equipped models.
4. 29400247 High-Flow – Wedge
Milwaukee-Eight® Engine. High Compression Applications
Fits ’17-later Touring and Trike models equipped with Wedge These plugs are designed for high-performance applications
High-Flow Air Cleaner Kit P/N 29400245 or 29400246. 7 8 involving modifications in high-flow air cleaners, camshafts,
exhaust, performance heads, ignition components, higher
5. 29400065 Extreme Billet. compression ratios above Original Equipment configurations
Fits ’15-’20 XG, ’16-’17 Softail® and ’08-’16 Touring and Trike or engines specific for racing applications.
models equipped with Extreme Billet Agitator and Chisel Air
Cleaner Kits. 31600105 High Compression Applications.
Fits ’99-later Twin Cam-equipped models. ’86-later XL and
5. 29400359 Extreme.
XR and Evolution 1340 models equipped with Screamin’
Fits ’18-later Softail and ’17-later Touring and Trike models
Eagle Performance Cylinder Heads.
equipped with round High-Flow Air Cleaner P/N 29400357.
5. 29400118 Extreme Billet & Rail. C. SCREAMIN’ EAGLE 10MM PHAT SPARK PLUG WIRES –
Fits ’07-later XL, ’08-’17 Dyna and ’08-’15 Softail and models CUT TO LENGTH
equipped with Extreme Billet Chisel and Agitator or Rail 2 Fat 10mm plug wires add dimension and style to your ride.
Collection Air Cleaner Kits. Screamin’ Eagle boot design and suppression core wires
6. 29400109 Burst Collection. A. SCREAMIN’ EAGLE HIGH-FLO K&N REPLACEMENT AIR FILTER ELEMENT ensure solid connection and maximum voltage transfer
Fits ’08-’17 Dyna and Softail models, ’08-’16 Touring and RCT (Ribbed Core Technology) between coil and plugs. Screamin’ Eagle script printed along
Trike models equipped with Burst Collection Air Cleaner Kits. provides improved resistance to plug fouling. the wire to add style.
7. 29400022A Ventilator – Multi-fit. Fine Wire Center Electrode The rib’s proximity promotes spark discharge to
32095-98B Black.
Fits models equipped with Twin-Cam Ventilator and Extreme promotes ignitability and the shell on plugs that are starting to foul,
allowing the air/fuel charge in the cylinder to
Multi-Fit – Cut to length. Fits ’86-’03 XL models (except
Billet Ventilator Performance Air Cleaner Kits. Replacement enhances start-up.
ignite and clear the plug. XL1200S), ’91-’98 Dyna® models, ’85-’99 Softail® models
for P/N 29670-09. and ’80-’84 Touring models.
8. 29400293 Ventilator – 9 10 11
Milwaukee-Eight® Engine. Platinum Pads on both “V-trimmed” Ground Electrode
Fits ’18-later Softail, ’17-later Touring and Trike models electrodes reduce gap erosion for reduces shrouding to promote
equipped with Ventilator Air Cleaner P/N 29400298 or longer plug life. flame propagation.
29400299.
9. 29424-05B Heavy Breather – Multi-fit, Chrome.
Fits models equipped with Heavy Breather Kit P/N 29098-09, 2
29299-08, 29080-09 or 29264-08.
9. 29702-08B Heavy Breather – Touring, Chrome. B. SCREAMIN’ EAGLE PERFORMANCE SPARK PLUG
Fits models equipped with Heavy Breather Kit
P/N 29006-09B, 29253-08B, 29000065 or 29400105.
29400297 Heavy Breather – Touring, Black.
Fits ’16-’17 FXDLS and models equipped with Heavy Breather
Kit P/N 29006-09B, 29253-08B, 29000065 or 29400105. Also available in Black Also available in Black
10. 28714-10 Heavy Breather – Compact, Chrome.
2
SCREAMIN’ EAGLE
Fits ’08-’16 Touring and Trike models equipped with Compact
Heavy Breather Kit P/N 28716-10A. A. SCREAMIN’ EAGLE HIGH-FLO K&N REPLACEMENT AIR FILTER ELEMENT – HEAVY BREATHER
11. 29400141 Heavy Breather Elite, Chrome.
Fits models equipped with Screamin’ Eagle Heavy Breather
Elite Performance Air Cleaner Kit P/N 29400172 and
29400173.
27300139 Heavy Breather Elite, Black.
Replacement air filter for models equipped with Screamin’
Eagle Heavy Breather Elite Performance Air Cleaner Kit 12 13
P/N 29400285.
12. 29400276 Heavy Breather –
Milwaukee-Eight Engine, Black.
Fits ’18-later Softail, ’17-later Touring and Trike models
equipped with Heavy Breather Air Cleaner P/N 29400263 or
29400264.
13. 29400275 Heavy Breather –
Milwaukee-Eight Engine, Chrome.
Fits ’18-later Softail, ’17-later Touring and Trike models
equipped with Heavy Breather Air Cleaner P/N 29400263 or Street legal and/or street compliant statements refer to
29400264. product meeting 50-State emissions and noise standards
in the United States.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
A. SCREAMIN’ EAGLE HIGH-FLO K&N REPLACEMENT AIR FILTER ELEMENT – C. SCREAMIN’ EAGLE 10MM PHAT SPARK PLUG WIRES – CUT TO LENGTH
MILWAUKEE-EIGHT HEAVY BREATHER
416 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 417
Spark Plug Wires
A. SCREAMIN’ EAGLE® 10MM PHAT SPARK PLUG WIRES
Fat 10mm plug wires add dimension and style to your ride.
Screamin’ Eagle® boot design and suppression core wires
ensure solid connection and maximum voltage transfer
between coil and plugs. Screamin’ Eagle script printed along
SCREAMIN’ EAGLE®
the wire to add style.
Fits ’15-’20 XG models.
CRATE ENGINE & DRIVE TRAIN COMPONENTS
31600048A Black. Fresh from the factory, Harley-Davidson® Crate Engines are the ideal platform
31600051A Orange.
for building your high-performance ride. And once you’ve put your heart and
31600054A Red.
soul into achieving just the type of horsepower and torque numbers you crave,
Fits ’07-later XL models.
31901-08A Black.
we offer everything you need to get all that power to the pavement.
31902-08A Orange.
Fits ’04-’06 XL models.
31958-04B Black.
31956-04B Orange.
Fits ’86-’03 XL models (except XL1200S).
32092-98B Black.
31963-89B Orange.
A. SCREAMIN’ EAGLE 10MM PHAT SPARK PLUG WIRES – RED
Fits ’99-’17 Dyna® models.
31930-99C Black.
31944-99C Orange.
31937-99C Red.
Fits ’91-’98 Dyna, ’85-’99 Softail® and ’80-’84 Touring models.
32093-98B Black.
31964-89C Orange.
Fits ’18-later Softail models.
31600111 Black.
31600113 Orange.
31600112 Red.
Fits ’00-’17 Softail models (except FXCW, FXCWC, FXS and
’13-’16 FXSB models).
31907-08A Black.
32360-00C Orange.
32359-00C Red.
Fits ’08-’16 FXCW, FXCWC, FXS and FXSB models.
31965-08A Black.
31967-08A Red.
Fits ’17-later Touring and Trike models.
31600108 Black.
31600110 Orange.
31600109 Red.
Fits ’09-’16 Touring and Trike models.
32303-08A Black. A. SCREAMIN’ EAGLE A. SCREAMIN’ EAGLE
10MM PHAT SPARK PLUG WIRES – ORANGE 10MM PHAT SPARK PLUG WIRES – BLACK
32325-08A Orange.
32318-08A Red.
Fits ’99-’08 Touring models.
31932-99C Black.
31946-99C Orange.
SCREAMIN’ EAGLE
31939-99C Red.
SCREAMIN’ EAGLE
114 Black with Chrome Covers – Air/Oil-cooled 90 90 Black & Gloss Black.
Fits ’17-later Touring models. Original equipment on ’18 FLRT.
120 120 Twin Cam 103HO Stock vs. SE120ST Crate Motor
require Screamin’ Eagle Big Twin Compensator Kit P/N
40100061. All models require ECM calibration for proper
with Stock Exhaust installation. ’10-’13 Touring models can be programmed by
110 110
130 130 Dealer (sold separately). ’14-’16 Touring models can be
calibrated using the Screamin’ Eagle Pro Street Tuner (sold
100 100 120 120 separately).
SCREAMIN’ EAGLE
Corrected Rear Wheel Horsepower (hp)
110 110
37000121A
Fits ’99-’17 Evolution® 1340 and Twin Cam-equipped models.
Will not fit ’16-later Touring and Trike models, ’15-later
FLHTCUL or FLHTKL models or ’07-later Touring or Trike
models equipped with Narrow-Profile Outer Primary Cover
SCREAMIN’ EAGLE
P/N 25700385 or 25700438. Will not fit ’13-later CVO models
with hydraulic actuated clutch, ’16-’17 FXDLS, FLSS and
FLSTFBS, or ’14-later Touring and Trike models equipped
with Screamin’ Eagle A&S Clutch Kit P/N 37000026. Derby
Covers P/N 25001-03, 25441-04A, 25770-99, 25331-10,
25339-10, 25700250 and 25700062 require Spacer Kit
P/N 37000123. Does not fit Derby Covers P/N 25347-02 or
25345-01.
C. MILWAUKEE-EIGHT ENGINE
CLUTCH SPRINGS – 1275N
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
B. SCREAMIN’ EAGLE HIGH CAPACITY CLUTCH D. MILWAUKEE-EIGHT ENGINE F. SCREAMIN’ EAGLE VARIABLE PRESSURE CLUTCH
PLATE KIT – MILWAUKEE-EIGHT ENGINE CLUTCH SPRINGS – 1200N
424 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 425
Clutch & Drivetrain Shortblock Program
A. SCREAMIN’ EAGLE® TWIN CAM PERFORMANCE 2
ASSIST AND SLIP (A&S) CLUTCH KIT
Developed for the high-thrust 110CI engine featured as
SHORT & LONGBLOCK PROGRAM
Original Equipment on ’14-later CVO™ models, this A&S clutch When it comes time to repower your motorcycle, the first stop should be
your local Harley ® Dealer. They can set you up with a replacement short-
provides significantly increased torque-handling capacity
block or longblock engine that is manufactured from 100% new Original
(135lb/ft). Clutch is designed to improve engagement grip Equipment parts and subjected to the same rigorous testing as all Harley
and provides minor slippage during downshifting to reduce engines. Plus, all longblock engines feature a one-year factory warranty
shock to the power train. Reduces hand lever pull effort by and your original VIN stamped on the case.
over 1 pound. Complete kit features improved clutch plates for
enhanced wear resistance and is the perfect addition when F. SHORTBLOCK ASSEMBLY
installing a high-output Screamin’ Eagle® Stage Kit. The perfect starting point for building the engine of your
37000026 dreams. Engine shortblocks are manufactured and assembled
Fits ’14-’16 Touring and Trike models with hydraulic clutch on Harley-Davidson’s main engine assembly line for excep-
actuator. Original Equipment on FXDLS, FLSS, FLSTBS and tional quality and reliability. Shortblock cases, flywheels, bear-
FXSE models. ings and rods are preassembled and ready for your custom
build. Kit includes current spec Original Equipment cam plate,
B. SCREAMIN’ EAGLE PERFORMANCE 2 oil pump, cam drive components and the gaskets, seals and
CLUTCH FRICTION DISC KIT most of the hardware required to complete the engine and
Newly developed friction material delivers longer life than install it (not all components shown). You select your cylinders,
Original Equipment friction discs. Kit includes new precision- heads, cams, covers and other top-end components. Choose
machined flat steel plates. This Friction Disc Kit is a perfect one of the Screamin’ Eagle® Stage kits to incorporate reliable
match for the Screamin’ Eagle Twin Cam Performance Race 2 performance and pick from our decorative engine covers to
customize the look. Shortblock Assemblies are stamped with
Clutch Hub Kit P/N 37976-08.
a new VIN and include MSO (Manufacturers Statement of
37980-10 A. SCREAMIN’ EAGLE TWIN CAM PERFORMANCE ASSIST AND SLIP CLUTCH KIT Origin). The MSO is for Domestic only. Kits ship directly from
Fits ’99-’17 Twin Cam-equipped models and ’98-’99
the factory within 3-5 days. Assembly comes stamped with
Evolution® 1340-equipped models. Will not fit ’13-’16 CVO™
a new VIN on Twin-Cam Kits. (For VIN matching shortblock
Touring models with hydraulic actuated clutch or, ’15-’16
assemblies see the appropriate Service Parts Catalog.)
FLHTCUL and FLHTKL, ’16-’17 FXDLS, FLSS, FLSTFBS, FXSE
or ’13-’16 CVO Touring models with hydraulic actuated clutch, Twin Cam Engine
’15-’16 FLHTCUL and FLHTKL or ’14-’16 Touring and Trike
16200070 Black 96CI/103CI.
models equipped with Screamin’ Eagle A&S Clutch Kit
Fits ’07-’17 Dyna® (except FXDLS), and ’07-’16 Touring and
P/N 37000026.
Trike models (except CVO™).
C. HEAVY DUTY CLUTCH SPRING FOR 2 16200071 Black 96CI/103CI.
Fits ’07-’17 Softail® models (except FLSS, FLSTFBS and CVO).
STOCK CLUTCH
37951-98 Milwaukee-Eight® Engine (not shown)
Fits ’99-’17 Twin Cam-equipped models and ’98-’99 See your Dealer for details.
Evolution 1340-equipped models. Will not fit ’16-’17 FXDLS,
FLSS, FLSTFBS and FXSE or ’13-’16 CVO Touring models with
hydraulic actuated clutch, or ’15-’16 FLHTCUL and FLHTKL, F. TWIN CAM SHORTBLOCK ASSEMBLY – DYNA AND TOURING
’14-’16 Touring and Trike models equipped with Screamin’
Eagle A&S Clutch Kit P/N 37000026.
SCREAMIN’ EAGLE
reduced by 20% in 1130cc and 30% on 1250cc applications.
37938-08KA
Fits ’02-’07 VRSC™ models.
NOTE: Replacement engines must be re-fitted with
emission control devices and systems appropriate for the
vehicle model and model year in order to ensure emissions
compliance. Failure to do so constitutes tampering under
U.S. EPA guidelines and can lead to substantial fines and
penalties.
Legal for use on public roads only when installed in the
specified models. Not legal for use on public roads when
installed in models other than the ones specified and not
eligible for the P&A 24-month warranty when installed in
models other than the ones specified. Please see the
Parts and Accessories warranty statement and your
dealer for more information.
Street legal and/or street compliant statements refer to Street legal and/or street compliant statements refer to
product meeting 50-State emissions and noise standards product meeting 50-State emissions and noise standards
in the United States. in the United States.
The street legal and/or street compliant statements may
not apply to markets outside of the United States.
2 2 The street legal and/or street compliant statements may
not apply to markets outside of the United States.
D. SCREAMIN’ EAGLE PERFORMANCE E. SCREAMIN’ EAGLE PERFORMANCE SLIPPER F. TWIN CAM SHORTBLOCK ASSEMBLY – SOFTAIL
CLUTCH KIT CLUTCH FOR VRSC MODELS
426 SCREAMIN’ EAGLE® SCREAMIN’ EAGLE® 427
LongBlock Program LongBlock Program
LONGBLOCK PROGRAMAM
Your engine is the heart and soul of your
Harley-Davidson® motorcycle. When the Cam Chain
miles start to add up, a Harley-Davidson®
LongBlock can put the rumble back in High-Volume
your ride simply, quickly and affordably. Oil Pump
Valve Cover
Gaskets
Cam Cover
WHY SHOULD I CONSIDER A LONGBLOCK? Unlike an
Gasket
engine rebuild from the repair shop down the street, the
Harley-Davidson® LongBlock is manufactured from 100%
new Original Equipment components, and is built to the Billet Cam
latest factory specifications. Engine includes upgraded Timing Chain
& Gears Support Plate
Screamin’ Eagle® lefty crankcase bearing, Screamin’ Eagle
cam bearings and Screamin’ Eagle performance tappets to o
handle higher-stress loads and performance upgrades. In Rocker Arm
addition, ’99-’06 LongBlocks are upgraded with late-modell Shafts
hydraulic cam tensioners, high-volume oil pump and Rocker Arm
billet cam plate. ’07-’16 103CI and 110CI engines feature Supports
Rocker Arms
factory-installed Automatic Compression Releases.
SCREAMIN’ EAGLE
authorized dealership. They will remove the engine from the Valve Cover
’01-’06 EFI Softail models. ’03-’06 EFI Touring models.
frame, ship the left crankcase half to Harley-Davidson and Gaskets
16200093 Twin Cam 95 – Black.* 16200095 Twin Cam 103 – Black.* Cam Cover
in a short time, you will have a new LongBlock back, ready Gasket
16200094 Twin Cam 95 – Silver.* 16200096 Twin Cam 103 – Silver.*
for the dealer to reinstall in your bike. Your engine retains
its original vehicle identification number (VIN) for easy title ’07-’17 Softail models. ’07-’17 Dyna and ’07-’16 Touring models (Includes
exchange and registration. 16200104 Twin Cam 103 – Black.* ACR – Auto Compression Release). Cam Support
Timing Chain
16200108 Twin Cam 110™ – Black.* 16200103 Twin Cam 103 – Black.* Plate
& Gears
16200109 Twin Cam 110 – Granite.* 16200105 Twin Cam 110 – Black.*
*Displacement upgrades are available for vehicles previously 16200106 Twin Cam 110 – Granite.*
equipped with street compliant big bore kits only. ’99-’05 Dyna and ’99-’06 Touring models. Rocker Arm
16200085 Twin Cam 88 – Black. ’14-’16 Twin-Cooled™ Touring models. Shafts
16200086 Twin Cam 88 – Silver. 16200162 Twin Cam 103 – Black.* Rocker Arm
16200163 Twin Cam 110 – Black.* Supports
Rocker Arms
16200164 Twin Cam 110 – Granite.*
Breathers
EMPIRE™ COLLECTION EMPIRE COLLECTION EMPIRE COLLECTION DARK CUSTOM ™ NUMBER ONE SKULL BRASS
Black Machine Cut Chrome COLLECTION COLLECTION COLLECTION
SEE PAGE 432 & 478 SEE PAGE 432 & 477 SEE PAGE 432 & 476 SEE PAGE 438 SEE PAGE SEE PAGES
RIDE FREE™ COLLECTION HARLEY-DAVIDSON ® HARLEY-DAVIDSON K AHUNA ™ COLLECTION AIRFLOW LIVE TO RIDE
Chrome MOTOR CO. COLLECTION MOTOR CO. COLLECTION Gloss Black COLLECTION COLLECTION
Gloss Black Chrome Chrome
SEE PAGES 433 & 500 SEE PAGES SEE PAGE
SEE PAGE SEE PAGE SEE PAGE
DOMINION ™ COLLECTION K AHUNA ™ COLLECTION WILLIE G SKULL COLLECTION WILLIE G SKULL COLLECTION DOMINION COLLECTION ENDGAME COLLECTION
Gloss Black Anodized Chrome Black Chrome Bronze Powder Coated
SEE PAGES 442 & 484 SEE PAGES 435 & 493 SEE PAGES 436 & 488-489 SEE PAGES 437 & 490-491 SEE PAGES 442 & 485 SEE PAGES 480 & 483
432 ENGINE TRIM ENGINE TRIM 433
Derby, Timer & Air Cleaner Covers Derby, Timer & Air Cleaner Covers
A. EMPIRE™ COLLECTION — GLOSS BLACK
Raise the stakes. Deep grooves add eye-catching depth and D. RIDE FREE™ COLLECTION
detail to the rich black anodized finish on this complete collec- This collection celebrates our liberty to enjoy the freedom of
tion of hand and foot controls. Executed in durable cast and the open road, and calls us all to explore, discover and unite
billet aluminum, the Black Empire™ Collection adds captivat- with our love of motorcycling. Inspired by Willie G. Davidson’s
ing custom detail that complements other black and machine famous phrase, this collection continues in that tradition.
cut accessories. 1. 25701057 Derby Cover.
25701171 Derby Cover. Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
Fits ’16-later Touring and Trike and ’15-later FLTHCUL and FLHTKL models. Also fits ’07-later Touring and Trike models
FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N
equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.
25700385 or 25700438. 2. 25701063 Derby Cover.
25701177 Derby Cover. Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover
Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039,
P/N 25700900, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.
25701040 and 25701043. 3. 25701059 Derby Cover.
25600148 Timer Cover. Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail
Fits ’17-later Milwaukee-Eight® engine equipped models. (except FLSB) and ’99-’15 Touring and Trike models (except
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
B. EMPIRE™ COLLECTION — BLACK MACHINE CUT Narrow-Profile Outer Primary Cover P/N 25700385 or
Raise the stakes. Milled highlights reveal gleaming billet 25700438).
aluminum below the rich black anodized surface, while deep 4. 25701061 Derby Cover.
grooves add eye-catching depth and detail to each component A. EMPIRE COLLECTION DERBY COVER — A. EMPIRE COLLECTION TIMER COVER — D. RIDE FREE COLLECTION DERBY COVER Fits ’04-later XL and XR models.
in this complete collection of hand and foot controls. Executed GLOSS BLACK GLOSS BLACK 5. 25600138 Timer Cover.
in durable cast and billet aluminum, the Black Machine Cut Fits ’17-later Milwaukee-Eight® engine-equipped models.
Empire™ Collection adds captivating custom detail that 6. 25600140 Timer Cover.
complements black or machine cut accessories. Fits ’04-later XL and XR models
25701173 Derby Cover. 7. 61301025 Air Cleaner Trim.
Fits ’16-later Touring and Trike and ’15-later FLTHCUL and 1 2 3 4 Fits ’17-later Touring and Trike models with Original
FLHTKL models. Also fits ’07-later Touring and Trike models Equipment wedge shaped air cleaner cover. Does not fit
equipped with Narrow-Profile Outer Primary Cover P/N CVO™ models.
25700385 or 25700438. 8. 61301027 Air Cleaner Trim.
25701179 Derby Cover. Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 (except FLS, FLSS, FLSTSB, and FXS) and ’99-’13 Touring and
Softail models equipped with Narrow Profile Primary Cover Trike models equipped with oval-shaped Original Equipment
P/N 25700900, 25700913, 25700937, 25700941, 25701039, air cleaner cover. Also fits models equipped with Screamin’
25701040 and 25701043. Eagle® Round High-Flow Air Cleaner Kits with separate
25600152 Timer Cover. purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim
Fits ’17-later Milwaukee-Eight® engine equipped models Installation Kit P/N 12400158.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
C. EMPIRE COLLECTION DERBY COVER — C. EMPIRE COLLECTION TIMER COVER — E. HDMC DERBY COVER E. HDMC TIMER COVER
CHROME CHROME
434 ENGINE TRIM ENGINE TRIM 435
Derby, Timer & Air Cleaner Covers Derby, Timer & Air Cleaner Covers
A. HARLEY-DAVIDSON® MOTOR CO. COLLECTION – C. KAHUNA™ COLLECTION – GLOSS BLACK
GLOSS BLACK Understated but powerful, the Kahuna™ Collection’s rich,
An aggressive twist on a classic style. The Harley-Davidson® gloss black surface is interrupted by a powerful raised bridge
Motor Co. Collection personifies Harley style and features a that draws the eye from leading to trailing edge. A red Bar &
rich gloss black surface, trimmed with deep-cut silver-filled Shield logo adds the finishing touch.
lettering that surrounds a central groove. The clean design 1. 25700887 Derby Cover.
and the luxurious finish are the perfect match for blacked-out Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
engines. Includes black zinc hardware. FLHTKL models. Also fits ’07-later Touring and Trike models
1. 25701022 Derby Cover. equipped with Narrow-Profile Outer Primary Cover P/N
Fits ’16-later Touring and Trike and ’15-later FLHTCUL and 25700385 or 25700438.
FLHTKL. Also fits ’07-later Touring and Trike models 2. 25700988 Derby Cover.
equipped with Narrow-Profile Outer Primary Cover P/N Fits ’06-’17 Dyna®, ’07-’18 Softail® (except FLSB) and ’07-’15
25700385 or 25700438. Touring and Trike (except FLHTCUL and FLHTKL and ’07-’15
1. 25701023 Derby Cover. Touring and Trike models equipped with Narrow-Profile Outer
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Primary Cover P/N 25700385 or 25700438).
Softail models equipped with Narrow Profile Primary Cover 3. 25600109 Timer Cover.
P/N 25701077, 25700913, 25700937, 25700941, 25701039, Fits ’17-later Milwaukee-Eight® engine-equipped models.
25701040 and 25701043. 4. 25600108 Timer Cover.
1. 25701020 Derby Cover. Fits ’99-’17 Twin Cam-equipped models.
Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail 5. 61300928 Air Cleaner Trim
(except FLSB) and ’99-’15 Touring and Trike models (except Fits ’17-later Touring and Trike models with Original
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Equipment air cleaner cover. Does not fit CVO™ models.
Narrow-Profile Outer Primary Cover P/N 25700385 or
25700438). 6. 61300929 Air Cleaner Trim.
A. HARLEY-DAVIDSON MOTOR CO. B. HARLEY-DAVIDSON MOTOR CO C. KAHUNA COLLECTION DERBY COVER – D. KAHUNA COLLECTION DERBY COVER –
GLOSS BLACK CHROME Fits ’16-’17 Softail (except FLSTFBS) and ’14-’16 Touring and
2. 25701021 Derby Cover. COLLECTION DERBY COVER – GLOSS BLACK COLLECTION DERBY COVER – CHROME
Trike models with Original Equipment Air Cleaner Cover. Does
Fits ’04-later XL and XR models. not fit CVO models.
3. 25600135 Timer Cover.
Fits ’17-later Milwaukee-Eight® engine-equipped models. D. KAHUNA™ COLLECTION – CHROME
4. 25600133 Timer Cover. 1 1 2 Understated but powerful, the Kahuna™ Collection’s smooth,
2
Fits ’99-’17 Twin Cam equipped models. glass-like chrome surface is interrupted by a powerful raised
5. 25600134 Timer Cover. bridge that draws the eye from leading to trailing edge. A red
Fits ’04-later XL, XR and earlier models with horizontal holes Bar & Shield logo adds the finishing touch.
on timer cover. 1. 25700987 Derby Cover.
6. 61301005 Air Cleaner Trim. Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXLR and ’20-later FLHTKL models. Also fits ’07-later Touring and Trike models
FXST models with Original Equipment center bolt air cleaner equipped with Narrow-Profile Outer Primary Cover P/N
cover. 25700385 or 25700438.
2. 25700888 Derby Cover.
B. HARLEY-DAVIDSON® MOTOR CO. Fits ’06-’17 Dyna®, ’07-’18 Softail® (except FLSB) and ’07-’15
COLLECTION – CHROME 3 Touring and Trike (except FLHTCUL and FLHTKL and ’07-’15
This collection personifies Harley style. It had better, because Touring and Trike models equipped with Narrow-Profile Outer
4
we put our name on it–the Harley-Davidson® Motor Co. Primary Cover P/N 25700385 or 25700438).
Collection. 3 6
3. 25600115 Timer Cover.
1. 25700476 Derby Cover. 4 Fits ’17-later Milwaukee-Eight® engine-equipped models.
5
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and 4. 25600114 Timer Cover.
FLHTKL models. Also fits ’07-later Touring and Trike models 5 6 Fits ’99-’17 Twin Cam-equipped models.
equipped with Narrow-Profile Outer Primary Cover P/N 5. 61300991 Air Cleaner Trim.
25700385 or 25700438. Fits ’17-later Touring and Trike models with Original
1. 25700959 Derby Cover. Equipment air cleaner cover. Does not fit CVO™ models.
Fits ’18-later FLSB and ’19-later Softail® models. Also fits 6. 61301022 Air Cleaner Trim.
’18-later Softail models equipped with Narrow Profile Primary Fits ’16-’17 Softail (except FLSTFBS) and ’14-’16 Touring and
Cover P/N 25701077, 25700913, 25700937, 25700941, Trike models with Original Equipment Air Cleaner Cover. Does
25701039, 25701040 and 25701043. not fit CVO models.
1. 25338-99B Derby Cover. A. HARLEY-DAVIDSON MOTOR CO. COLLECTION – GLOSS BLACK C. HARLEY-DAVIDSON MOTOR CO. COLLECTION – GLOSS BLACK
Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail
(except FLSB) and ’99-’15 Touring and Trike models (except
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
Narrow-Profile Outer Primary Cover P/N 25700385 or
25700438).
1 2 2
2. 25130-04A Derby Cover. 1
Fits ’04-later XL and XR models. Includes chrome-plated
stainless steel mounting hardware.
3. 25600068 Timer Cover.
Fits ’17-later Milwaukee-Eight® engine-equipped models.
4. 32047-99A Timer Cover.
Fits ’99-’17 Twin Cam-equipped models. Includes chrome-
plated stainless steel mounting hardware. 8
5. 32668-98A Timer Cover.
Fits ’04-later XL, XR and earlier models with horizontal holes 3
on timer cover. Includes chrome-plated stainless steel
3
mounting hardware.
7
6. 61300658 Air Cleaner Trim. 4
Fits ’17-later Touring and Trike models with Original
Equipment air cleaner cover. Does not fit CVO™ models.
ENGINE TRIM
7. 61300254 Air Cleaner Trim.
Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16
5 5 6
Touring and Trike models with Original Equipment air cleaner 4 6
cover. Does not fit CVO models.
8. 61300792 Air Cleaner Trim – Center Bolt.
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXLR and ’20-later Model Family Fitment:
FXST models with Original Equipment center bolt air cleaner
cover. V-ROD SPORTSTER DYNA
SOFTAIL TOURING
B. HARLEY-DAVIDSON MOTOR CO. COLLECTION – CHROME D. HARLEY-DAVIDSON MOTOR CO. COLLECTION – CHROME
436 ENGINE TRIM ENGINE TRIM 437
Derby, Timer & Air Cleaner Covers Derby, Timer & Air Cleaner Covers
A. WILLIE G SKULL COLLECTION – BLACK B. WILLIE G SKULL COLLECTION – CHROME
Penned at the hand of Willie G. the famous Skull Collection Add a little attitude to your ride. Styled to complement
makes a shift to the dark side. Completely drenched in black, Harley-Davidson® Skull accessory items, the menacing raised
the raised skull and surrounding Harley-Davidson Motorcycle skull with black-filled eyes leaps from a field of chrome. The
script adds a subtle ominous touch to your ride. The finish surrounding Harley-Davidson Motorcycles script is the perfect
easily coexists alongside gloss black or wrinkle black surfaces. finishing touch. This complete collection of engine covers
The complete collection of components includes matching dresses your bike for a true custom look.
black hardware. 1. 25700469 Derby Cover.
1. 25700740 Derby Cover. Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and
Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models
FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover
equipped with Narrow-Profile Outer Primary Cover P/N P/N 25700385 or 25700438.
25700385 or 25700438. 1. 25700958 Derby Cover.
1. 25700976 Derby Cover. Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover
Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039,
P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.
25701040 and 25701043. 1. 25441-04A Derby Cover.
1. 25700742 Derby Cover. Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail
Fits ’99-’17 Dyna®, ’00-’18 Softail (except FLSB) and ’99-’15 (except FLSB) and ’99-’15 Touring and Trike models (except
Touring and Trike models (except ’15 FLHTCUL and FLHTKL FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
and ’07-’15 Touring and Trike models equipped with Narrow- Narrow-Profile Outer Primary Cover P/N 25700385 or
Profile Outer Primary Cover P/N 25700385 or 25700438). 25700438).
Installation on ’06-’17 Dyna and ’07-later Softail, and ’07-’15 2. 25440-04A Derby Cover.
Touring and Trike models requires separate purchase of Fits ’04-later XL and XR models. Includes chrome-plated
Gasket P/N 25416-99C. stainless steel mounting hardware.
2. 25700744 Derby Cover. 3. 25600066 Timer Cover.
Fits ’04-later XL and XR models. Fits ’17-later Milwaukee-Eight® engine-equipped models.
3. 25600085 Timer Cover. 4. 32975-04A Timer Cover.
Fits ’17-later Milwaukee-Eight® engine-equipped models. Fits ’99-’17 Twin Cam-equipped models. Includes chrome-
4. 25600087 Timer Cover. plated stainless steel mounting hardware.
Fits ’99-’17 Twin Cam models. 5. 32972-04A Timer Cover.
5. 25600089 Timer Cover. Fits ’04-later XL, XR and earlier models with horizontal holes
Fits ’04-later XL, XR and earlier models with horizontal holes on timer cover. Includes chrome-plated stainless steel
on timer cover. mounting hardware.
6. 29400345 Air Cleaner Trim. 6. 61300654 Air Cleaner Trim.
Fits ’17-later Touring and Trike models with Original Fits ’17-later Touring and Trike models with Original
Equipment wedge shaped air cleaner cover. Equipment air cleaner cover. Does not fit CVO™ models.
7. 29400366 Air Cleaner Trim. A. WILLIE G SKULL COLLECTION DERBY COVER – BLACK B. WILLIE G SKULL COLLECTION DERBY COVER – CHROME 7. 29417-04 Air Cleaner Trim.
Fits Evolution® 1340 models, ’99-’08 Dyna. ’00-’15 Softail Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail
(except FLS, FLSS, FLSTSB, and FXS) and ’99-’13 Touring and (except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and
Trike models equipped with oval-shaped Original Equipment Trike models with Original Equipment air cleaner cover. Also
air cleaner cover. Also fits models equipped with Screamin’ fits models equipped with Screamin’ Eagle® Round HIgh-
Eagle® Round High-Flow Air Cleaner Kits with separate Flow Air Cleaner Kits with separate purchase of Rain Sock Kit
purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim 1 P/N 28728-10 or Air Cleaner Trim Installation Kit P/N
Installation Kit P/N 12400158. 1 2 12400158.
8. 29400339 Air Cleaner Trim. 2 8. 61300217 Air Cleaner Trim.
Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16 Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16
Touring and Trike models with Original Equipment air cleaner Touring and Trike models with Original Equipment air cleaner
cover. Does not fit CVO™ models. cover. Does not fit CVO™ models.
9. 29400341 Air Cleaner Trim. 9. 29416-04 Air Cleaner Trim.
Fits ’04-later XL models equipped with Original Equipment Fits ’04-later XL models with Original Equipment oval air
oval air cleaner cover. cleaner cover.
8
3 7 3
8
7
6
4 6
4
ENGINE TRIM
5 5
9 9
SOFTAIL TOURING
A. WILLIE G SKULL COLLECTION – BLACK B. WILLIE G SKULL COLLECTION – CHROME
438 ENGINE TRIM ENGINE TRIM 439
Derby, Timer & Air Cleaner Covers Derby, Timer & Air Cleaner Covers
A. DARK CUSTOM™ LOGO COLLECTION B. NUMBER ONE SKULL COLLECTION
The famous Harley-Davidson #1 logo with a sinister twist. The sinister Harley-Davidson #1 Skull logo dresses for a night
Machined from billet aluminum, these covers feature domed on the town. This complete die-cast aluminum collection has
surfaces that are polished and black anodized to a rich been polished and chrome-plated to a brilliant shine, then
satin sheen, and then re-machined to expose the raw alumi- finished with a contrasting black-filled Dark Custom Skull logo.
num. The resulting high-contrast design complements both The black-filled race track stripe and recessed hardware pock-
polished and painted engine finishes. ets provide added depth and dimension. Includes chrome-
1. 25700434 Derby Cover – Billet. plated mounting hardware.
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and 1. 25700435 Derby Cover – Billet.
FLHTKL models. Also fits ’07-later Touring and Trike models Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and
equipped with Narrow-Profile Outer Primary Cover P/N FLHTKL models. Also fits ’07-later Touring and Trike models
25700385 or 25700438. equipped with Narrow-Profile Outer Primary Cover
1. 25700960 Derby Cover. P/N 25700385 or 25700438.
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 1. 25331-10 Derby Cover.
Softail models equipped with Narrow Profile Primary Cover Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail®
P/N 25701077, 25700913, 25700937, 25700941, 25701039, (except FLSB) and ’99-’15 Touring and Trike models (except
25701040 and 25701043. FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
1. 25562-09 Derby Cover – Billet. Narrow-Profile Outer Primary Cover P/N 25700385 or
Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail 25700438).
(except FLSB) and ’99-’15 Touring and Trike models (except 2. 25333-10 Derby Cover.
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Fits ’04-later XL models.
Narrow-Profile Outer Primary Cover P/N 25700385 or 3. 25600065 Timer Cover.
25700438). Fits ’17-later Milwaukee-Eight® engine-equipped models.
2. 25563-09 Derby Cover – Billet. 4. 32519-10 Timer Cover.
Fits ’04-later XL models. Fits ’99-’17 Twin Cam-equipped models.
3. 25600064 Timer Cover – Billet. 5. 32520-10 Timer Cover.
Fits ’17-later Milwaukee-Eight® engine-equipped models. Fits ’04-later XL, XR and earlier models with horizontal holes
4. 32414-09 Timer Cover – Billet. on timer cover.
Fits ’99-’17 Twin Cam-equipped models. 6. 61300657 Air Cleaner Trim.
5. 32415-09 Timer Cover – Billet. Fits ’17-later Touring and Trike models with Original
Fits ’04-later XL, XR and earlier models with horizontal holes Equipment air cleaner cover. Does not fit CVO™ models.
on timer cover. 7. 27956-10 Air Cleaner Trim.
6. 61300655 Air Cleaner Trim – Billet. Fits Evolution® 1340 models, ’99-’08 Dyna, ’00-’15 Softail
Fits ’17-later Touring and Trike models with Original (except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and
Equipment air cleaner cover. Does not fit CVO™ models. Trike models with Original Equipment air cleaner cover. Also
7. 61300057 Air Cleaner Trim – Billet. fits models equipped with Screamin’ Eagle® Round High-Flow
Fits Evolution® 1340 models, ’99-’08 Dyna, ’00-’15 Softail Air Cleaner Kits with separate purchase of Rain Sock Kit P/N
(except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and 28728-10 or Air Cleaner Trim Installation Kit P/N 12400158.
Trike models with Original Equipment air cleaner cover. Also A. DARK CUSTOM LOGO COLLECTION DERBY COVER B. NUMBER ONE SKULL COLLECTION DERBY COVER 8. 61300218 Air Cleaner Trim.
fits models equipped with Screamin’ Eagle® Round High-Flow Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16
Air Cleaner Kits with separate purchase of Rain Sock Kit Touring and Trike models with Original Equipment air cleaner
P/N 28728-10 or Air Cleaner Trim Installation Kit P/N cover. Does not fit CVO models.
12400158. 9. 60826-11 Transmission Trim.
8. 61300055 Air Cleaner Trim – Billet. Fits ’11-’16 models equipped with 103CI Twin Cam engine
Fits ’04-later XL models with Original Equipment oval air option.
cleaner cover. 2 1 2
1
4
4
3
3 7 7
5
5
9
6
ENGINE TRIM
8
6
SOFTAIL TOURING
A. DARK CUSTOM LOGO COLLECTION B. NUMBER ONE SKULL COLLECTION
440 ENGINE TRIM 1
ENGINE TRIM 441
Derby, Timer & Air Cleaner Covers Derby, Timer & Air Cleaner Covers
A. BRASS COLLECTION C. HARLEY-DAVIDSON® LIVE TO RIDE COLLECTION –
The authentic alternative to the typical chrome-covered or GOLD
blacked-out look, the Harley-Davidson® Brass Collection Live to Ride, Ride to Live. It has become the motto of the
delivers a warm, handcrafted look to your custom ride. These Harley-Davidson nation, accompanying riders over millions
minimalistic living finish components make a garage-built of miles of travel. This collection is a tribute to that way of life.
styling statement and are the ideal addition to your stripped- 1. 25700472 Derby Cover.
down bobber or café motorcycle. Artistically manufactured Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and
from solid brass, these components feature a natural antique FLHTKL models. Also fits ’07-later Touring and Trike models
finish that will age and patina when exposed to the elements. equipped with Narrow-Profile Outer Primary Cover
Unlike bright polished and plated brass trim, these heritage- P/N 25700385 or 25700438.
finished components are subtle additions to your ride and 3 1. 25700961 Derby Cover.
don’t compete for attention with the rest of the bike. Brass
2 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18
Collection components are factory treated with wax to slow
Softail models equipped with Narrow Profile Primary Cover
the aging process, and are shipped with cleaning and care
P/N 25701077, 25700913, 25700937, 25700941, 25701039,
instructions.
25701040 and 25701043.
1. 25700515 Derby Cover.
1. 25340-99A Derby Cover.
Fits ’06-’17 Dyna®, ’07-’18 Softail® (except FLSB), and ’07-’15
Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail
Touring, and Trike (except FLHTCUL and FLHTKL and ’07-’15
(except FLSB) and ’99-’15 Touring and Trike models (except
Touring and Trike models equipped with Narrow-Profile Outer
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
Primary Cover P/N 25700385 or 25700438). Does not fit
Narrow-Profile Outer Primary Cover P/N 25700385 or
with passenger footboards in the “medium” or “low” position
25700438).
when flipped up.
2. 25127-04A Derby Cover.
1. 25700967 Derby Cover.
Fits ’04-later XL and XR models. Includes chrome-plated
Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 A. BRASS COLLECTION DERBY COVER A. BRASS COLLECTION stainless steel mounting hardware.
Softail models equipped with Narrow Profile Primary Cover
P/N 25701077, 25700913, 25700937, 25700941, 25701039, 3. 25600067 Timer Cover.
25701040 and 25701043. Fits ’17-later Milwaukee-Eight® engine-equipped models.
2. 25600081 Timer Cover. 4. 32689-99A Timer Cover.
Fits ’18-later Softail and ’17-later Touring and Trike models Fits ’99-’17 Twin Cam-equipped models. Includes chrome-
equipped with Milwaukee-Eight® engines. plated stainless steel mounting hardware.
3. 61400339 Air Cleaner Trim. 5. 32585-90T Timer Cover.
Fits Evolution® 1340 models, ’99-’08 Dyna. ’00-’15 Softail Fits models with vertical mounting holes.
(except FLS, FLSS, FLSTSB, and FXS) and ’99-’13 Touring and 32581-90TB Timer Cover. (not shown)
Trike models equipped with oval-shaped Original Equipment Fits ’04-later XL, XR and earlier models with horizontal holes
air cleaner cover. Also fits models equipped with Screamin’ on timer cover. Includes chrome-plated stainless steel
Eagle® Round High-Flow Air Cleaner Kits with separate mounting hardware.
purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim 6. 61300656 Air Cleaner Trim.
Installation Kit P/N 12400158. Fits ’17-later Touring and Trike models with Original
Equipment air cleaner cover. Does not fit CVO™ models.
B. AIRFLOW COLLECTION C. HARLEY-DAVIDSON LIVE TO RIDE DERBY COVER – GOLD 7. 29328-99 Air Cleaner Trim.
Shaped to cheat the wind. The polished and mirror-chromed Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail
Airflow Collection features a raised bridge with 3 lami- (except FLS, FLSTSB and FXS) and ’99-’13 Touring and Trike
nar grooves that float over the recessed panels. The layered models with Original Equipment air cleaner cover. Also fits
surfaces capture light and shadows, and frame the subtle models equipped with Screamin’ Eagle® Round High-Flow Air
black-filled Harley-Davidson signature. This complete Cleaner Kits with separate purchase of Rain Sock Kit
collection sets the stage for your one-of-a-kind custom ride. P/N 28728-10 or Air Cleaner Trim Installation Kit P/N
Includes chrome-plated mounting hardware. 1
12400158.
1. 25700505 Derby Cover. 7
8. 61400455 Air Cleaner Trim – Center Bolt.
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXLR and ’20-later
FLHTKL models. Also fits ’07-later Touring and Trike models FXST models with Original Equipment center bolt air cleaner
equipped with Narrow-Profile Outer Primary Cover cover.
P/N 25700385 or 25700438. 2 9. 61300220 Air Cleaner Trim.
1. 25700969 Derby Cover. Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16
Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Touring and Trike models with Original Equipment air cleaner
Softail models equipped with Narrow Profile Primary Cover cover. Does not fit CVO models.
B. AIRFLOW COLLECTION DERBY COVER
P/N 25701077, 25700913, 25700937, 25700941, 25701039, 10. 29823-04 Air Cleaner Trim.
25701040 and 25701043. Fits ’04-later XL models with Original Equipment oval air
2. 25700504 Derby Cover. cleaner.
Fits ’99-’17 Dyna®, ’00-’18 Softail (except FLSB) and ’99-’15 8 11. 61400025 Transmission End Cover Trim.
Touring and Trike models (except FLHTCUL, FLHTKL and ’07- 3 Fits ’11-’16 Touring and Trike models equipped with 103CI
’15 Touring and Trike models equipped with Narrow-Profile 2
1 Twin Cam engine option.
Outer Primary Cover P/N 25700385 or 25700438).
Installation on ’06-later Dyna, ’07-’18 Softail and ’07-’15 3
Touring and Trike models require separate purchase of 4
Gasket P/N 25416-99C.
3. 25700506 Derby Cover.
Fits ’04-later XL models. 5
4. 25600099 Timer Cover.
Fits ’17-later Milwaukee-Eight® engine-equipped models. 11
5. 25600046 Timer Cover. 10
Fits ’99-’17 Twin Cam models. 7
6. 25600047 Timer Cover.
Fits ’04-later XL models.
7. 61400323 Air Cleaner Trim. 8
6
Fits Evolution® 1340 models, ’99-’08 Dyna. ’00-’15 Softail
ENGINE TRIM
(except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and 5 6
9
Trike models equipped with oval-shaped Original Equipment
air cleaner cover. Also fits models equipped with Screamin’
Eagle® Round High-Flow Air Cleaner Kits with separate
purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim 4
Installation Kit P/N 12400158. Model Family Fitment:
8. 61300542 Air Cleaner Trim.
Fits ’16-’17 Softail (except FLSTFBS and FXSE) and ’14-’16 V-ROD SPORTSTER DYNA
Touring and Trike models with Original Equipment Air Cleaner
Cover. Does not fit CVO™ models. SOFTAIL TOURING
B. AIRFLOW COLLECTION C. HARLEY-DAVIDSON LIVE TO RIDE COLLECTION – GOLD
442 ENGINE TRIM ENGINE TRIM 443
Milwaukee-Eight® Collections Milwaukee-Eight® Collections
A. DOMINION™ COLLECTION ENGINE TRIM – 61400598 C. DOMINION™ COLLECTION INSERTS – LARGE
GLOSS BLACK Make your bike a true custom of one. The Large Dominion™
Express your bold, renegade attitude. This complete collec- Inserts allow you to customize and personalize Dominion
tion of engine covers lets you set your own styling direction. Collection accessories, so your bike is truly one of a kind.
Crafted from aluminum, the Dominion™ Collection features
a gloss black anodized finish with machined, raw aluminum 61400602 Fits ’06-’17 Dyna®,’07-later Softail® and ’07-later Touring
surfaces. These surfaces can be left exposed or they come and Trike models equipped with Dominion Derby, Cam, or
ready to be filled with interchangeable brushed black, bronze Transmission Side Covers. Sold Individually.
powder-coated or brushed orange anodized inserts (sold 61400598 Brushed Black.
separately) that allow you to create your own look. Socket 61400606 61400602 Bronze.
head cap screws are included for added style.
61400606 Brushed Orange.
25700722 Cam Cover. 61400609 Brushed Black, HDMC.
Fits ’18-later Softail® and ’17-later Touring and Trike models.
34800047 Transmission Side Cover. 61400609 D. DOMINION COLLECTION INSERTS – SMALL
Fits ’18-later Softail models (except FLDE, FLHC and FLHCS). Make your bike a true custom of one. The Small Dominion
25800130 Transmission Side Cover. C. DOMINION COLLECTION INSERTS – LARGE C. DOMINION COLLECTION INSERTS – LARGE Inserts allow you to customize and personalize Dominion
Fits ’17-’20 Touring and Trike models. (BLACK HDMC SHOWN – MIDDLE INSERT) Collection accessories, so your bike is truly one of a kind.
25700779 Upper Rocker Covers.
Fits ’06-’17 Dyna, ’07-later Softail and ’07-later Touring and
Fits ’18-later Softail and ’17-later Touring and Trike models.
Trike models equipped with Dominion Derby or Cam covers.
Includes 2 covers.
Sold Individually.
25700768 Derby Cover.
61400599 Brushed Black.
Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
FLHTKL models. Also fits ’07-later Touring and Trike models 61400603 Bronze.
equipped with Narrow-Profile Outer Primary Cover P/N 61400607 Brushed Orange.
25700385 or 25700438. 61400599
25700965 Derby Cover. E. DOMINION COLLECTION INSERTS – ROCKER BOX
Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 Make your bike a true custom of one. The Dominion Upper
Softail models equipped with Narrow Profile Primary Cover Rocker Box Inserts allow you to customize the top of your
P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, bike’s engine case, making it a one-of-a-kind.
25701040 and 25701043.
61400603 Fits ’18-later Softail and ’17-later Touring and Trike models
equipped with Dominion Upper Rocker Box covers. Includes
B. DOMINION™ COLLECTION ENGINE TRIM – BRONZE
4 inserts.
Express your bold, renegade attitude. This complete collec-
tion of engine covers lets you set your own styling direction. 25700791 Brushed Black.
Crafted from aluminum, the Dominion™ Collection features 25700792 Bronze.
a bronze powder-coated finish with machined, raw aluminum 25700793 Brushed Orange.
surfaces. These surfaces can be left exposed or they come 61400607
ready to be filled with interchangeable brushed black, bronze F. DOMINION™ OUTER PRIMARY COVER
powder-coated or brushed orange anodized inserts (sold D. DOMINION COLLECTION INSERTS – SMALL Add visual interest and style to the primary side of your ride.
A. DOMINION COLLECTION ENGINE TRIM – GLOSS BLACK D. DOMINION COLLECTION INSERTS – SMALL
separately) that allow you to create your own look. Socket (ORANGE SHOWN – TOP AND BOTTOM) Crafted from forged aluminum, the Dominion Collection™
head cap screws are included for added style. Outer Primary Covers feature a gloss black anodized or bronze
25700777 Cam Cover. powder-coated finish. Match or complement other Dominion
Fits ’18-later Softail® and ’17-later Touring and Trike models. Collection Accessories when you cover the oil fill cavity with a
34800048 Transmission Side Cover. 25700791 Dominion Oil Fill Insert (required and sold separately). The Oil
Fits ’18-later Softail models (except FLDE, FLHC and FLHCS). Fill Inserts are available in brushed aluminum, brushed black,
bronze powder-coated or brushed orange anodized finishes to
25800132 Transmission Side Cover.
complement your styling direction.
Fits ’17-’20 Touring and Trike models.
25700780 Upper Rocker Covers. Fits ’18-later Softail (except FXBB, FXBBS, FXLR, FXLRS
Fits ’18-later Softail and ’17-later Touring and Trike models. FLRST and FXST). Requires separate purchase of Oil Fill Insert
Includes 2 covers. Kit P/Ns 25700804, 25700805, 25700806 or 25700807.
25700822 Derby Cover. 25700792 25700793 25700795 Gloss Black.
Fits ’16-later Touring and Trike and ’15-later FLHTCUL and
FLHTKL models. Also fits ’07-later Touring and Trike models G. DOMINION COLLECTION OIL FILL INSERT – OUTER
equipped with Narrow-Profile Outer Primary Cover P/N PRIMARY
25700385 or 25700438. Required when installing a Dominion Collection Outer Primary
25700966 Derby Cover. Cover, these interchangeable brushed black, bronze powder-
Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 coated, brushed orange anodized, or aluminum inserts allow
Softail models equipped with Narrow Profile Primary Cover you to customize the Primary Cover to match your styling
P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, direction.
25701040 and 25701043.
Fits ’18-later Softail models equipped with Dominion Outer
Primary Cover. Includes gasket and screws.
E. DOMINION COLLECTION INSERTS – E. DOMINION COLLECTION INSERTS –
ROCKER BOX (BRONZE SHOWN) ROCKER BOX 25700805 Brushed Black.
25700806 Bronze.
25700807 Brushed Orange.
25700804 Brushed Aluminum.
25700805
25700806
ENGINE TRIM
25700807
SOFTAIL TOURING
B. DOMINION COLLECTION ENGINE TRIM – BRONZE F. DOMINION COLLECTION PRIMARY COVER – G. DOMINION COLLECTION OIL FILL INSERTS –
BLACK (SHOWN WITH BRUSHED OUTER PRIMARY COVER
ORANGE INSERT)
444 ENGINE TRIM ENGINE TRIM 445
Milwaukee-Eight® Collections Milwaukee-Eight® Collections
A. GLOSS BLACK ENGINE COVER KIT – C. DEFIANCE COLLECTION – BLACK
MILWAUKEE-EIGHT® POWERTRAIN Show your complete disregard for the rules. Defined by sweep-
Upgrade your black and chrome Milwaukee-Eight® motor to ing curves, this complete assortment of engine covers feature
the sinister look of gloss black. Manufactured from Original a rich tuxedo black finish that is the perfect complement to
Equipment components, these richly finished engine covers your sinister ride. The design incorporates deep longitudinal
start your bike on its journey to the dark side. Critical gasket lines, and is finished with a contemporary H-D logo. Complete
surfaces are masked to provide a good sealing surface with the look with gloss black primary, lower rocker boxes and
the engine. The six-piece kit includes the primary cover, cam transmission top covers (sold separately).
cover, upper rocker box covers, transmission side cover and 25700710 Cam Cover.
transmission top cover. Rocker box lower housings, derby Fits ’18-later Softail® (except FLDE, FLHC and FLHCS) and
cover and timer cover are available separately. ’17-later Touring and Trike models. Does not fit FXDRS models
Kit includes: equipped with Screamin’ Eagle® Exhaust. Installation
requires separate purchase of model-specific cam cover
• Primary Cover
gasket.
• Cam Cover
25700712 Upper Rocker Covers.
• Upper Rocker Box Covers (2)
Fits ’18-later Softail and ’17-later Touring and Trike models.
• Transmission Side Cover with Insert
Installation requires separate purchase of model-specific
• Transmission Top Cover rocker cover gaskets. Sold in pairs.
92500059 Six Piece Engine Cover Kit. 25800087 Transmission Side Cover.
Fits ’17-’20 Touring and Trike models. Fits ’17-’20 Touring and Trike models.
B. MILWAUKEE-EIGHT ENGINE COVERS – GLOSS BLACK NOTE: Removing and installing engine covers may require
These engine covers are the perfect start in converting your purchase of new gaskets. See dealer for information.
powertrain to an elegant tuxedo black look. Manufactured
from Original Equipment components to ensure a perfect fit, Shown With:
these covers are coated with temperature-resistant paint to DEFIANCE COLLECTION VENTILATOR AIR CLEANER
ensure a long-lasting finish, and critical surfaces are masked TRIM – BLACK ANODIZED
to provide good gasket seal. Complete the look with matching This forged and machined Defiance Air Cleaner Trim kit adds a
primary covers, rocker housings, rocker covers, cam covers premium touch to the Milwaukee-Eight® Ventilator Air Cleaner.
and transmission covers (sold separately). The billet-style band with deep longitudinal lines and H-D logo
25700491 Primary Cover. wraps the center section of the Ventilator Air Cleaner face
Fits ’17-later Touring and Trike models. plate for a contemporary look. Kit includes trim band and
mounting hardware. Protective Rain Sock P/N 29400177 or
25700750 Primary Cover. 29762-09 is available separately.
Fits ’18 Softail® models (except FLSB, FXBB, FXBBS, , FXLR,
FXLRS, and FXLRST). 61300769 Black Anodized.
Fits ’18-later Softail and ’17-later Touring and Trike models
25700913 Narrow-Profile Primary Cover.
equipped with Ventilator Air Cleaner P/N 29400298 or
Fits ’18-later Softail models (except FXST, FXBB, FXBBS,
29400299. Also fits ’18-later Softail models with 114CI
FXLR, FXLRS and FXLRST). ’18 models (except FLSB) require
engines and ’17-later CVO™ touring models with Original
separate purchase of Softail Narrow Derby Cover and
A. GLOSS BLACK ENGINE COVER KIT – MILWAUKEE-EIGHT POWERTRAIN C. DEFIANCE ENGINE TRIM – BLACK Equipment Ventilator Air Cleaner with separate purchase of
required gaskets.
(SHOWN WITH DEFIANCE VENTILATOR AIR CLEANER TRIM) Air Filter P/N 29400293.
25700467 Cam Cover.
Fits ’18-later Softail and ’17-later Touring and Trike models.
25700520 Rocker Box Cover – Upper.
Fits ’18-later Softail and ’17-later Touring and Trike models (2
required).
25700638 Rocker Box Cover – Lower.
Fits ’18-later Softail and ’17-later Touring and Trike models (2
required).
25800055 Transmission Side Cover.
Fits ’17-’20 Touring and Trike models.
25800098 Transmission Side Cover
Fits ’18-later Softail and ’21-later Touring and Trike models
34800031 Transmission Top Cover.
Fits ’18-later Softail and ’17-later Touring and Trike models.
’18-later Softail models require separate purchase of gasket
P/N 25700453.
25700477 Derby Cover.
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and
FLHTKL models. Also fits ’07-later Touring and Trike models
equipped with Narrow-Profile Outer Primary Cover
P/N 25700385 or 25700438.
25700971 Derby Cover.
Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18
Softail models equipped with Narrow Profile Primary Cover
P/Ns 25701077, 25700913, 25700937, 25700941, 25701039,
25701040 and 25701043.
25600098 Timer Cover.
Fits ’17-later Milwaukee-Eight engine-equipped models.
NOTE: Removing and installing engine covers may require
purchase of new gaskets. See dealer for information.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
B. MILWAUKEE-EIGHT ENGINE COVERS – GLOSS BLACK C. DEFIANCE ENGINE TRIM – BLACK
446 ENGINE TRIM ENGINE TRIM 447
Milwaukee-Eight® Collections Milwaukee-Eight® Collections
DEFIANCE COLLECTION ENGINE TRIM B. DEFIANCE COLLECTION – CHROME
The Milwaukee-Eight® engine is the centerpiece of the modern Dare to be bold. Dressed in luxurious chrome, this complete
Harley-Davidson® motorcycle, so treat it to a unique contem- collection of engine covers raises the customization bar.
porary look. These Defiance Collection engine covers incor- Defined by sweeping curves and accented with deep longitu-
porate a unique forward-thrusting design that blends a retro dinal lines and a contemporary H-D logo, the Chrome Defiance
art-deco streamliner look with a modern contemporary twist. Collection design imparts a feeling of forward motion to the
Designed side-by-side with the Original Equipment compo- bike’s profile. Add the complete collection, or start with one
nents, these exquisitely engineered cast and billet parts are component and build your custom ride.
machined to fit the bike perfectly. Available in your choice of 25700661 Cam Cover.
chrome, gloss black or machine cut black finishes; you can Fits ’18-later Softail® (except FLDE, FLHC and FLHCS) and
select the look that defines your sense of style. ’17-later Touring and Trike models. Does not fit FXDRS models
equipped with Screamin’ Eagle® Exhaust. Installation
A. DEFIANCE COLLECTION – BLACK MACHINE CUT requires separate purchase of model-specific cam cover
Anything but traditional, this complete collection of engine gasket.
covers refuses to conform to everyday norms. The sweeping 25700663 Upper Rocker Covers.
aero curves define the look, and the rich contrasting finishes Fits ’18-later Softail and ’17-later Touring and Trike models.
set the tone. The machine-cut Defiance Collection features Installation requires separate purchase of model-specific
deep grooves milled into the black anodized surface that rocker cover gaskets. Sold in pairs.
exposes the shimmering aluminum below. Complete the look
with gloss black primary, lower rocker boxes and transmission 25800063 Transmission Side Cover
top covers (sold separately). Fits ’17-’20 Touring and Trike models.
25700602 Cam Cover. NOTE: Removing and installing engine covers may require
Fits ’18-later Softail® (except FLDE, FLHC and FLHCS) and purchase of new gaskets. See dealer for information.
’17-later Touring and Trike models. Does not fit FXDRS models
equipped with Screamin’ Eagle® Exhaust. Installation Shown With:
requires separate purchase of model-specific cam cover DEFIANCE COLLECTION VENTILATOR AIR CLEANER
gasket. TRIM – CHROME
25700604 Upper Rocker Covers. This forged and machined Defiance Air Cleaner Trim kit adds a
Fits ’18-later Softail and ’17-later Touring and Trike models. premium touch to the Milwaukee-Eight® Ventilator Air Cleaner.
Installation requires separate purchase of model-specific The billet-style band with deep longitudinal lines and H-D logo
rocker cover gaskets. Sold in pairs. wraps the center section of the Ventilator Air Cleaner face
25800065 Transmission Side Cover. plate for a contemporary look. Kit includes trim band and
Fits ’17-’20 Touring and Trike models. mounting hardware. Protective Rain Sock P/N 29400177 or
29762-09 is available separately.
NOTE: Removing and installing engine covers may require
61300768
purchase of new gaskets. See dealer for information.
Fits ’18-later Softail and ’17-later Touring and Trike models
equipped with Ventilator Air Cleaner P/N 29400298 or
Shown With: 29400299. Also fits ’18-later Softail models with 114CI
DEFIANCE COLLECTION VENTILATOR AIR CLEANER engines and ’17-later CVO™ touring models with Original
TRIM – BLACK ANODIZED MACHINE CUT A. DEFIANCE ENGINE TRIM – BLACK MACHINE CUT B. DEFIANCE ENGINE TRIM – CHROME Equipment Ventilator Air Cleaner with separate purchase of
This forged and machined Defiance Air Cleaner Trim kit adds a (SHOWN WITH DEFIANCE VENTILATOR AIR CLEANER TRIM) (SHOWN WITH DEFIANCE VENTILATOR AIR CLEANER TRIM) Air Filter P/N 29400293.
premium touch to the Milwaukee-Eight Ventilator Air Cleaner.
The billet-style band with deep longitudinal lines and H-D logo
wraps the center section of the Ventilator Air Cleaner face
plate for a contemporary look. Kit includes trim band and
mounting hardware. Protective Rain Sock P/N 29400177 or
29762-09 is available separately.
61300770
Fits ’18-later Softail and ’17-later Touring and Trike models
equipped with Ventilator Air Cleaner P/N 29400298 or
29400299. Also fits ’18-later Softail models with 114CI
engines and ’17-later CVO™ touring models with Original
Equipment Ventilator Air Cleaner with separate purchase of
Air Filter P/N 29400293.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
A. DEFIANCE ENGINE TRIM – BLACK MACHINE CUT B. DEFIANCE ENGINE TRIM – CHROME
448 ENGINE TRIM 2 ENGINE TRIM 449
Derby, Timer & Air Cleaner Covers Engine Covers – Milwaukee-Eight®
1 1
A. CLASSIC CHROME COVERS D. NARROW-PROFILE PRIMARY COVERS – FORWARD
From the design philosophy of less is more, we bring you this CONTROLS
collection of basic chrome accessories, which provides a clean, 3 Shaped to slim the bike’s left side profile, this Narrow-Profile
custom look that is guaranteed to turn heads. Primary Cover provide short-limbed riders a straight leg path
1. 25700388 Derby Cover. to the pavement. Original Equipment on ’19-later Softail®
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and models.
FLHTKL models. Also fits ’07-later Touring and Trike models Fits ’18-later Softail models (except FXST, FXBB, FXBBS, FXLR,
equipped with Narrow-Profile Outer Primary Cover 4 FXLRS and FXLRST). ’18 models (except FLSB) require sepa-
P/N 25700385 or 25700438. 2 rate purchase of Softail Narrow Derby Cover and required
1. 60766-06 Derby Cover. (not shown) gaskets.
Fits ’06-’17 Dyna® and ’07-’18 Softail® (except FLSB), ’07-’15 5 1. 25701077 Chrome.
Touring and Trike models (except FLHTCUL, FLHTKL or ’07-
’15 Touring or Trike models equipped with Narrow-Profile 2. 25700913 Gloss Black.
Outer Primary Cover P/N 25700385 or 25700438). Does not 6 3. 25701039 Polished.
fit with passenger footboards in the “medium” or “low” 4. 25701040 Satin Chrome.
position when flipped up.
7
5. 25701043 Wrinkle Black.
2. 34760-04 Derby Cover.
Fits ’04-later XL models. Also available:
3. 32584-88TA Timer Cover. 3 Fits ’18-later FXBB, FXBBS, FXLRS, FXLRST, FXLR and FXST
Fits ’04-later XL, XR and earlier models with horizontal holes models. ’18 models require separate purchase of Softail Derby
on timer cover. Includes chrome-plated stainless steel Cover and required gaskets.
mounting hardware. 25700937 Chrome.
4. 32679-99A Timer Cover. 25700941 Wrinkle Black.
Fits Twin Cam-equipped models. Includes chrome-plated A. CLASSIC CHROME COVERS
stainless steel mounting hardware. E. OE STYLE NARROW-PROFILE DERBY COVERS –
5. 25600097 Timer Cover. ’19-LATER SOFTAIL®
Fits ’17-later Milwaukee-Eight® engine-equipped models. Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18
34761-04A Chain Inspection Cover. (not shown) Softail models equipped with Narrow Profile Primary Cover
Fits ’04-later XL models. 4 P/Ns 25701077, 25700913, 25700937, 25700941, 25701039,
6. 60529-90A Chain Inspection Cover. 1 25701040 and 25701043.
Fits ’91-’05 Dyna models (except FXDWG). 1. 25700934 Polished.
7. 60572-86 Chain Inspection Cover. 2. 25700973 Chrome.
Fits ’93-’05 FXDWG and ’86-’06 FLST, FXST and FXSTS 3. 25700970 Black Denim.
models. 4. 25700971 Gloss Black.
5. 25700972 Wrinkle Black.
B. BLACK FIN COLLECTION
Finish the sinister black look of your motorcycle with the 6. 25700968 Black Fin.
Black Fin Collection from Harley-Davidson. The raised hori-
zontal lines on these die-cast covers echo the traditional cylin- 5
der fin look, and the wrinkle black finish is a perfect match More derby covers for Narrow-Profile Primary
for the blacked-out primary, cam cover and Finned Headbolt Covers can be found on pages 504-523 in the
Bridge Kit.
collections pages.
1. 25454-01 Derby Cover.
Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna, ’99-’18 Softail
(except FLSB) and ’99-’15 Touring and Trike models (except 2 3
FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with
Narrow-Profile Outer Primary Cover P/N 25700385 or
25700438).
2. 25600142 Timer Cover.
Fits ’17-later Milwaukee-Eight engine-equipped models.
3. 32677-01 Timer Cover.
Fits ’99-’17 Twin Cam-equipped models.
C. BLACK DERBY COVERS B. BLACK FIN COLLECTION D. NARROW-PROFILE PRIMARY COVERS – FORWARD CONTROLS
Available in your choice of wrinkle black or gloss black finish,
these simple Derby Covers add a finishing touch to your
blacked-out engine.
Fits ’06-’17 Dyna and ’07-’18 Softail (except FLSB), and ’07-’15
Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15
Touring or Trike models equipped with Narrow-Profile Outer
Primary P/N 25700385 or 25700438). Does not fit with Wrinkle Black 1 2 3
passenger footboards in the “medium” or “low” position when
flipped up.
60713-07 Wrinkle Black.
25700020 Gloss Black.
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL
and FLHTKL models. Also fits ’07-later Touring and Trike
models equipped with Narrow-Profile Outer Primary Cover
P/N 25700385 or 25700438.
25700477 Gloss Black.
Fits ’04-later XL models. 4 5 6
34790-05 Wrinkle Black.
ENGINE TRIM
Model Family Fitment:
Gloss Black
V-ROD SPORTSTER DYNA
SOFTAIL TOURING
C. BLACK DERBY COVERS E. OE STYLE NARROW-PROFILE DERBY COVERS – ’19-LATER SOFTAIL
450 ENGINE TRIM ENGINE TRIM 451
Engine Covers – Milwaukee-Eight® Engine Covers – Milwaukee-Eight®
A. INNER PRIMARY COVER TRIM E. PUSHROD COVER KIT – GLOSS BLACK
Get the look of a custom inner primary cover without tear- Complete the sinister look. These covers replace existing
ing apart the drive train. Designed to wrap the top surface of chrome covers to give your bike a blacked-out appearance
the wrinkle-painted inner primary cover, this die-cast shell down to the smallest detail. Pushrod covers are finished
provides a beefy finished look to the engine cases. Easy to in gloss black and the kit includes the four bottom cover
install, the cover is secured with the outer primary hard- tubes, four upper clips and four center collars. Cover Kit can
ware, and held in place at multiple points for quiet operation. be installed on engines already equipped with Adjustable
Available in your choice of brilliant chrome or gloss black finish, Pushrods or can be installed by removing rocker box covers,
the complete kit includes matching mounting hardware. rocker arms and non-adjustable pushrods. Consult your
dealer or service manual for installation.
Fits ’17-later Touring and Trike models.
17900081
25700631 Chrome. Fits ’17-later Milwaukee-Eight® engine-equipped models.
25700654 Gloss Black. Requires prior installation of Adjustable Pushrods or removal
of rocker box covers, rocker arms and fixed-length pushrods.
B. INNER PRIMARY COVER – CHROME
Chrome is king. Visually widen the look of the primary cover F. TAPPET COVERS – GLOSS BLACK
A. INNER PRIMARY COVER TRIM – CHROME E. PUSHROD COVER KIT – GLOSS BLACK
without adding width or bulk. This chrome-plated Inner Complete your Twin Cam engine’s conversion to a total
(SHOWN WITH TAPPET COVERS – GLOSS BLACK)
Primary completes the look of the powertrain and adds a blacked-out look. These gloss black tappet blocks replace the
custom touch that sets your bike apart from the others. stock bright-finished components for a sinister appearance,
Manufactured from Original Equipment components for exact- and are manufactured from Original Equipment components
ing fit, the visual surfaces of this cover have been polished and for perfect fit and function. Gasket surface has been masked
plated to the highest Harley-Davidson standards. Installation to ensure good oil seal. Kit comes complete with a front and
requires separate purchase of model-specific Primary Cover rear cylinder lifter covers and two base gaskets.
Gaskets. 25700890
36500131 Fit’s ’17-later Milwaukee-Eight engine-equipped models. Sold
Fits ’17-later Touring and Trike models. in pairs.
B. INNER PRIMARY COVER – CHROME C. CYLINDER BASE COVER – CHROME G. FRONT ENGINE MOUNT STABILIZER LINK
5800061
ENGINE TRIM
5800062 Model Family Fitment:
SOFTAIL TOURING
D. STARTER MOTOR END COVER – D. STARTER MOTOR END COVER – H. FINNED SPARK PLUG COVERS
CHROME GLOSS BLACK
452 ENGINE TRIM ENGINE TRIM 453
Engine Covers – Twin Cam Engine Covers – Twin Cam
A. TWIN CAM ENGINE COVERS – GLOSS BLACK B. TWIN CAM ENGINE COVERS – WRINKLE BLACK
These engine covers are the perfect start in converting your These black powder-coated engine covers are the perfect start
powertrain to an elegant tuxedo black look. Manufactured in converting your powertrain to a striking wrinkle black look.
from Original Equipment components to ensure a perfect fit, Manufactured from Original Equipment components, these
these covers are masked and coated with temperature-resis- covers are masked and painted on the factory production
tant paint to ensure a long-lasting finish. Complete the look paint line to ensure a matching wrinkle black or texture black
with matching primary covers, rocker housings, rocker covers, finish and a perfect fit. Complete the blacked-out look with
cam covers and transmission covers (sold separately). matching primary covers, rocker housings, rocker covers, cam
25700021A Primary Cover. covers and transmission covers (sold separately).
Fits ’06-’17 Dyna® models with mid-controls. 60758-06A Primary Cover.
60876-11A Primary Cover. Fits ’06-’17 Dyna® models with mid controls.
Fits ’07-’17 Softail® models. Also fits ’06-’17 FLD and Dyna 60717-07A Primary Cover.
models equipped with factory forward controls. Will not fit Fits ’07-’17 Softail® models. Also fits ’06-’17 FLD and Dyna
with Accessory Forward Controls. models equipped with factory forward controls.
60886-11A Primary Cover. 60706-09A Primary Cover.
Fits ’07-’15 Touring and Trike models (except FLHTCUL and Fits ’07-’15 Touring and Trike models (except FLHTCUL or
FLHTKL). FLHTKL).
25700438 Narrow Primary Cover. 60715-99B Primary Cover.
Fits ’07-’16 Touring and Trike models. Installation requires Fits ’99-’05 Dyna and ’99-’06 Softail models.
separate purchase of narrow derby cover, derby cover gasket 17620-99 Rocker Box Cover.
and primary gasket. Chrome is Original Equipment on ’15-’16 Fits ’99-’17 Dyna, ’00-’17 Softail and ’99-’16 Touring and Trike
FLHTCUL and FLHTKL and ’16 Touring and Trike models. models (2 required).
17707-11 Rocker Box Cover. 17618-99A Rocker Box Lower Housing.
Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and Fits ’99-’17 Dyna, ’00-’17 Softail and ’99-’16 Touring and Trike
Trike models (2 required). models (2 required).
17709-11 Rocker Box Lower Housing. 25364-01B Cam Cover.
Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and Fits ’01-’17 Dyna, Softail and ’01-’16 Touring and Trike models
Trike models (2 required). (except ’01 EFI Touring).
37198-11 Cam Cover. 37135-06 Transmission Side Cover.
Fits ’01-’17 Dyna, Softail and ’01-’16 Touring and Trike models Fits ’06-’17 Dyna, ’07-’17 Softail (except FLSS, FLSTFBS,
(except ’01 EFI Touring). FXCW, FXCWC, FXSB and FXSE), and ’07-’16 Touring and
37193-11 Transmission Side Cover. Trike models. Does not fit models equipped with a hydraulic
Fits ’06-’17 Dyna, and ’07-’17 Softail (except FLSS, FLSTFBS, clutch.
FXCW, FXCWC, FXSB and FXSE), and ’07-’16 Touring and 37189-99 Transmission Side Cover.
Trike models. Does not fit models equipped with a hydraulic Fits ’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models.
clutch.
34521-06B Transmission Top Cover.
25700180 Transmission Side Cover. Fits ’06-’17 Dyna and ’07-’17 Softail, ’07-’16 Touring and Trike
Fits ’13-’16 Touring and Trike models equipped with hydraulic models.
clutch. A. TWIN CAM ENGINE COVERS – GLOSS BLACK B. TWIN CAM ENGINE COVERS – WRINKLE BLACK
60713-07 Derby Cover.
37195-11 Transmission Top Cover. Fits ’06-’17 Dyna and ’07-’18 Softail (except FLSB), and ’07-
Fits ’06-’17 Dyna and ’07-later Softail and ’07-’16 Touring and ’15 Touring and Trike models (except FLHTCUL, FLHTKL or
Trike models. ’07-’15 Touring or Trike models equipped with Narrow-Profile
25700020 Derby Cover. Outer Primary Cover P/N 25700385 or 25700438).
Fits ’06-’17 Dyna and ’07-’18 Softail (except FLSB) and ’07- NOTE: Removing and installing engine covers may require
’15 Touring and Trike models (except FLHTCUL, FLHTKL or purchase of new gaskets. See dealer for information.
’07-’15 Touring or Trike models equipped with Narrow-Profile
Outer Primary Cover P/N 25700385 or 25700438).
25700477 Derby Cover.
Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and
FLHTKL models. Also fits ’07-later Touring and Trike models
equipped with Narrow-Profile Outer Primary Cover
P/N 25700385 or 25700438.
25600074 Timer Cover.
Fits ’99-’17 Twin Cam-equipped models.
NOTE: Removing and installing engine covers may require
purchase of new gaskets. See dealer for information.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
A. TWIN CAM ENGINE COVERS – GLOSS BLACK B. TWIN CAM ENGINE COVERS – WRINKLE BLACK
454 ENGINE TRIM ENGINE TRIM 455
Engine Covers – Twin Cam Engine Covers – Twin Cam
A. TWIN CAM ENGINE COVERS – CHROME B. INNER PRIMARY COVER TRIM – CHROME
Dress the engine of your Twin Cam-equipped model in chrome. Get the look of a chrome inner primary cover without tear-
These chrome-plated components are manufactured to ing apart the drive train. Designed to wrap the top surface of
Original Equipment specifications for exact fit and finish. the painted inner primary cover, this mirror chrome die-cast
shell provides a beefy finished look to the engine cases. Easy
Outer Primary Covers to install, the cover is secured with the outer primary hard-
60764-06A ware, and held in place at four points for quiet operation. Kit
Fits ’06-’17 Dyna® models with mid controls. includes required mounting hardware. For a complete custom
60782-06A look, consider adding a Chrome Cylinder Base Cover and
Fits ’06-’17 Dyna models with forward controls and Classic Chrome Socket Head Screw Covers (sold separately).
’07-’17 Softail® models. 60868-10
60553-07A Fits ’07-’17 Softail® models (except FLSTSC, FXCW, FXCWC,
Fits ’07-’15 Touring and Trike models (except FLHTKL and FXSB, FXSBSE and FXSE). Fits with Original Equipment shift
FLHTCUL). linkage and Polished Shift Linkage P/N 33814-98A.
25700385 Narrow-Profile. 60885-10
Fits ’07-’16 Touring and Trike models. Installation requires B. INNER PRIMARY COVER TRIM – CHROME Fits ’09-’16 Touring and Trike models. Also fits with Chrome
separate purchase of narrow derby cover, derby cover gasket (TOURING AND TRIKE SHOWN) Starter Cover P/N 66477-10.
and primary gasket. Chrome is Original Equipment on ’15-’16
FLHTCUL and FLHTKL and ’16 Touring and Trike models. C. CYLINDER BASE COVER – SMOOTH
60543-99B Add a finished chrome look to the left side of your Twin Cam
Fits ’99-’05 Dyna and ’99-’06 Softail models. engine. This easy-to-install kit includes all necessary mount-
60665-99B Softail ing hardware.
Fits ’99-’06 Touring models. Fits ’94-’98 Touring models 32042-07
when used with Clutch Cover P/N 60668-99 and Gasket Touring and Trike Fits ’07-’17 Softail models (except FLSS and FLSTFBS). Will
P/N 25416-99C. not fit CVO™ models and models equipped with 110-cubic-
inch engines.
Cam Covers
32077-07
25369-01B Fits ’06-’17 Dyna® (except FXDLS) and ’07-’16 Touring and
Fits ’01-’17 Dyna, Softail, and ’01-’16 Touring and Trike models. Trike models. Will not fit CVO models and models equipped
(except ’01 EFI Touring). with 110-cubic-inch engines.
Transmission Side Covers
37116-06 D. TAPPET BLOCK ACCENT
Fits ’06-’17 Dyna, and ’07-’17 Softail (except FLSS, FLSTFBS, Shaped to fill the gap between the tappet blocks, this unique
FXCW, FXCWC, FXSB and FXSE), and ’07-’16 Touring and cover adds a splash of chrome to the profile of your engine.
Trike models. Does not fit models equipped with a hydraulic The die-cast cover is polished and chrome-plated to a mirror
clutch. finish. Easy to install.
37105-99 61400002
Fits ’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models. Fits ’99-’17 Twin Cam-equipped models. Does not fit with
B. INNER PRIMARY COVER TRIM – CHROME C. CYLINDER BASE COVER – SMOOTH Lifter Block Covers P/N 18248-99, 18278-06 and 18262-00
Rocker and Tappet Covers A. TWIN CAM ENGINE COVERS – CHROME
or Billet Lifter Cover P/N 18088-02.
Fits ’99-’17 Dyna, ’00-’17 Softail and ’99-’16 Touring and Trike
models. E. GASKET KIT FOR BLACK INNER PRIMARY
17572-99 Rocker Cover. It’s the details that count. This gasket kit eliminates the silver
17573-99A Lower Rocker Housing. shadow line you see between the engine and primary. It’s
the perfect finishing touch any time the primary has been
17964-99 Tappet Cover, Front.
removed for engine service or during the installation of other
17966-99 Tappet Cover, Rear. accessories. Comprehensive kit contains all gaskets and
hardware required to reinstall the primary.
25700337
Fits ’06-’17 Dyna, ’07-’17 Softail, and ’07-’16 Touring and Trike
models.
Also available:
EVOLUTION® 1340 ENGINE COVERS – CHROME
Inspection Covers – with Shifter Hole
60529-90A
Fits ’91-’05 Dyna® models (except FXDWG).
Inspection Covers – without Shifter Hole
60572-86
Fits ’93-’05 FXDWG and ’86-’06 FLST, FXST and FXSTS
models.
D. TAPPET BLOCK ACCENT
Rocker Cover Spacer
Sold as separate pieces. Order two per vehicle.
17529-92
Fits ’92-’99 Evolution 1340-equipped models.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
A. TWIN CAM ENGINE COVERS – CHROME E. GASKET KIT FOR BLACK INNER PRIMARY E. GASKET KIT FOR BLACK INNER PRIMARY
456 ENGINE TRIM ENGINE TRIM 457
Engine Covers – Twin Cam Engine Covers – Twin Cam
A. ENGINE/TRANSMISSION INTERFACE COVER E. FRONT ENGINE MOUNT COMPONENTS – CHROME
Featuring a ribbed design for sharp surface contrasts, this A must-have for any chrome connoisseur, this chrome-plated
chrome Engine/Transmission Interface Cover provides a Front Engine Mount Bracket will set your custom apart from
custom option to conceal the space between the cam cover the rest. The chrome bracket is machined from premium
and the transmission. The cover stretches from the gearcase 6061-T6 aluminum, and is a direct bolt-on replacement for the
cover to the rear of the transmission, and frames the trans- Original Equipment bracket. Can be used with the stock stabi-
mission side cover with a band of chrome for a complete lizer link, or dressed up with the optional chrome Front Engine
custom look. Kit includes all necessary mounting hardware. Mount Stabilizer Link P/N 16213-10. Kit includes chrome
66543-08 mounting hardware.
Fits ’07-’17 Softail® models (except FLSS, FLSTFBS, 16205-10 Front Engine Mount Bracket.
FLSTNSE, FLSTSC, FXCW, FXCWC, FXSB, FXSBSE and FXSE). Fits ’08-’16 Touring models.
Does not fit models equipped with hydraulic clutch. 16213-10
Add a custom style to the front end with this brilliant chrome-
plated Engine Mount Stabilizer Link. This custom heim joint
B. STARTER COVER – CHROME
assembly complements the chrome Billet Front Engine
With the under-chassis exhaust crossover on the late model
Mount Bracket P/N 16205-10. Kit includes chrome mounting
Touring bikes, the painted starter motor is now easily seen A. ENGINE/TRANSMISSION INTERFACE COVER E. BILLET FRONT ENGINE MOUNT BRACKET hardware.
from both sides of the bike. This brilliantly chrome-plated
cover conceals the starter motor and starter solenoid for a 16213-10 Front Tie Link.
clean, custom look. Easy to install, this kit includes all required Fits ’09-later Touring and Trike models.
mounting hardware.
66477-10 F. FRONT ENGINE MOUNT COMPONENTS – BLACK
Fits ’09-’16 Touring and Trike models (except CVO™ and Perfect for installation on a blacked-out engine, these black
models with High Output Starter P/N 31621-06A or 16400056 engine mount components replace the factory silver-finished
31619-06A). parts and blend these functional items into the background.
Manufactured from Original Equipment components for
perfect fit and proven reliability.
C. HARLEY-DAVIDSON® GENUINE HIGH PERFORMANCE
1.4KW STARTER 16400056 Front Engine Mount Bracket.
This starter offers both great styling and increased perfor- Fits ’08-’16 Touring models.
mance, providing 15% greater torque than the stock replace- 16400055 Front Tie Link.
ment starter. Engineered and tested by Harley-Davidson from Fits ’09-later Touring models.
the ground up, this starter offers unparalleled reliability and
durability. No special battery or battery cable requirements. G. PUSHROD COVER KIT – GLOSS BLACK
Complete the Dark Custom look. These covers replace exist-
Fits ’06-’17 Dyna® (except ABS equipped models) and ’07-’17
ing chrome covers to give your bike a blacked-out appearance
Softail and ’07-’16 Touring and Trike models.
16400055 down to the smallest detail. Pushrod covers are finished in
31619-06A Black Finish. gloss black and the kit includes the four bottom cover tubes
31621-06A Chrome Finish. and the four upper clips. Installation retains the Original
Equipment chrome short center tube to create a high-contrast
Fits ’99-’00 FXR, ’94-’05 Dyna and ’94-’06 Softail and Touring accent. Cover Kit can be installed on engines already equipped
models. B. STARTER COVER – CHROME F. FRONT ENGINE MOUNT COMPONENTS – BLACK with Adjustable Pushrods or can be installed by removing
31335-03A Black Finish. rocker box covers, rocker arms and non-adjustable pushrods.
31559-99A Chrome Finish. Consult your dealer or service manual for installation.
17900033 Covers Only.
D. STARTER SOLENOID COVER KIT – CHROME Fits ’99-’17 Twin Cam-equipped models. Requires prior
Add chrome to an often overlooked area with this cover, installation of Adjustable Pushrods or removal of rocker box
featuring the same high-quality, bright finish used on most of covers, rocker arms and fixed-length pushrods.
our accessories.
31783-00 H. PUSHROD TUBE COLLARS – GLOSS BLACK
Fits ’94-later models (except ’02-’17 VRSC™, ’15-later XG, Manufactured from Original Equipment components for
’18-later Softail and ’17-later Touring and Trike models). perfect fit and function, these Pushrod Collars complete your
Twin Cam engine’s conversion to the total blacked-out look.
Covers replace the chrome-finished factory covers, and fit
with stock or Screamin’ Eagle® Quick-Install Pushrods.
17900076
Fits ’84-’00 Evolution® 1340 and ’99-’17 Twin Cam-equipped
models. Installation requires use of Adjustable Pushrods or
removal of rocker box covers, rocker arms and fixed-length
pushrods.
ENGINE TRIM
31400092
Fits ’08-’16 Touring and Trike models.
SOFTAIL TOURING
D. STARTER SOLENOID COVER KIT – CHROME I. TAPPET COVERS – BLACK J. STARTER MOTOR END COVER – GLOSS
BLACK (SHOWN WITH SPEED CHECK
TRANSMISSION DIPSTICK)
458 ENGINE TRIM ENGINE TRIM 459
Sportster® Engine & Transmission Trim Sportster® Engine & Transmission Trim
A. RAIL COLLECTION ENGINE COVERS B. WRINKLE BLACK ENGINE COVERS
Tough broad-shouldered attitude with an edge – that’s what These black powder-coated engine covers are the perfect start
you get when you finish your ride with the Rail Collection. We in converting your powertrain to a striking wrinkle black look.
start with factory engineered components to ensure perfect Manufactured from Original Equipment components, these
fit and function. Then we apply a rich durable gloss black covers are masked and painted on the factory production
finish to draw attention to the heart of the bike, and then add paint line to ensure a matching wrinkle black or texture black
machined longitudinal strakes to provide visual length to the finish and a perfect fit. Complete the blacked-out look with
powertrain. The resulting look is masculine and aggressive – matching primary covers, rocker housings, rocker covers, cam
and it mixes well with either café or urban assault styles. Start covers and transmission covers (sold separately).
with a couple of components, or go all the way.
1. Gearcase Cover
1. Gearcase Cover
25486-05 Fits ’04-later XL models.
25700533
Fits ’04-later XL models. 2. Transmission Sprocket Cover
34943-05 Fits ’04-later XL models.
2. Transmission Sprocket Cover
34800032 3. Rocker Box Lower Housing (each)
Fits ’04-later XL models. Does not fit models equipped with 17645-07A Fits ’07-later XL models.
Rear Set Foot Controls P/N 50700040.
4. Rocker Box Cover (each)
3. Rocker Box Covers – Upper 17655-05 Fits ’04-later XL models.
25700531
Fits ’04-later XL models. Sold in pairs. 5. Primary Cover
25307-06 Fits ’06-later XL models.
4. Primary Cover
25700532 6. Primary Chain Inspection Cover
Fits ’06-later XL models. Includes gloss black Chain 34794-05A Fits ’04-later XL models.
Inspection Cover.
7. Derby Cover
NOTE: Removing and installing engine covers may require 34790-05 Fits ’04-later XL models.
purchase of new gaskets. See dealer for information.
NOTE: Removing and installing engine covers may require
Shown with: purchase of new gaskets. See dealer for information.
SCREAMIN’ EAGLE® PERFORMANCE AIR 2 Shown with:
CLEANER KIT – RAIL COLLECTION
The look is bold and the performance exhilarating. This race- SCREAMIN’ EAGLE® EXTREME BILLET 2
inspired air cleaner is engineered to flow through the perim- AIR CLEANER KIT – CHISEL
eter and the face of the air filter, providing high volumes of The bold styling of this intake system looks just as impres-
unrestricted airflow to the engine. The open-design face plate sive as the long patch of burnout rubber you just laid down.
features a rich black finish with machined longitudinal strakes The forged billet aluminum cover tops off a cast back plate
to expose the glowing aluminum below. Kit includes air cleaner with integral breather for a smooth transition to the throttle
trim, one-piece cast back plate, high-flow washable air filter body. The race-inspired air cleaner is engineered to flow high
element, rain sock and all required hardware. 50-State U.S. A. RAIL COLLECTION ENGINE COVERS B. WRINKLE BLACK ENGINE COVERS volumes of air and the washable pleated element provides
EPA compliant. the ideal combination of efficiency and engine protection.
Available in your choice of style and finish, this easy-to-install
29400232A kit includes all mounting hardware and rain sock. 50-State U.S.
Fits ’07-later XL models with Original Equipment throttle EPA compliant.
body. All models require ECM calibration for proper
installation. ’17-later models require recalibration with 29400127 Cut Back Gloss Black.
Screamin’ Eagle® Pro Street Tuner (sold separately). Pending 2 1 Fits ’07-later XL models with Original Equipment throttle
approval for use in California on ’21 models. Refer to H-D. body. All EFI models require ECM calibration for proper
com/shop for status. 2 installation. ’17-later models require recalibration with
1 Screamin’ Eagle® Pro Street Tuner (sold separately). Labor
cost not included. See Dealer for details.
3 5
GO LIGHT These Screamin’ Eagle products are 50-state
street compliant for sale and use on all vehicles, including
4 those that are pollution-controlled. Complies with the re-
quirements of 40 CFR Part 86, subparts E and F. Street legal
ENGINE TRIM
and/or street compliant statements refer to product meeting
50-state emissions and noise standards in the United States.
GO LIGHT These Screamin’ Eagle products are 50-state
street compliant for sale and use on all vehicles, including
those that are pollution-controlled. Complies with the re-
quirements of 40 CFR Part 86, subparts E and F. Street legal Model Family Fitment:
and/or street compliant statements refer to product meeting
V-ROD SPORTSTER DYNA
50-state emissions and noise standards in the United States.
SOFTAIL TOURING
A. RAIL COLLECTION ENGINE COVERS B. WRINKLE BLACK ENGINE COVERS
460 ENGINE TRIM ENGINE TRIM 461
Sportster® Engine & Transmission Trim Sportster® Engine Trim
A. CHROME ENGINE COVERS B. PUSHROD COVER KIT – GLOSS BLACK
Dress the engine of your Sportster® model in chrome. These These Pushrod Covers add to your bike’s blacked-out look
polished and chrome-plated components are manufactured and are coated with durable, heat-resistant gloss black paint.
to Original Equipment specifications for exact fit and finish. The kit includes four bottom cover tubes and four upper clips.
1. Primary Cover Pushrod Covers are a great add-on when upgrading the top
end of your engine with Screamin’ Eagle® performance cylin-
25460-06 Fits ’06-later XL models. der heads.
25460-04 Fits ’04-’05 XL models.
17900083
2. Gearcase Cover Fits ’04-later XL and XR models. Includes 4 Pushrod covers.
25213-04 Fits ’04-later XL models. Requires removal of cylinder heads for installation.
ENGINE TRIM
5
SOFTAIL TOURING
A. CHROME ENGINE COVERS F. AIR CLEANER COVER – GLOSS BLACK
462 ENGINE TRIM ENGINE TRIM 463
Air Cleaner Covers Air Cleaner Covers
A. DARK CUSTOM™ LOGO COLLECTION – F. MILWAUKEE-EIGHT® ENGINE AIR CLEANER COVER –
AIR CLEANER TRIM GLOSS BLACK
The famous Harley-Davidson #1 logo with a sinister twist. Complete the blacked-out look. This Gloss Black Air Cleaner
Styled to complement chrome or blacked-out motorcycles, Cover adds a sinister touch without changing the signature
this rich black air cleaner trim features a machined Dark profile of your Milwaukee-Eight® engine.
Custom #1 logo at its center. Formed from aluminum, this self- 61300828
adhesive buckshot-hole cover fits perfectly into the recessed Fits ’17-later Touring (except CVO™) and Trike models with
face of the Original Equipment Softail® perimeter-bolt air Original Equipment air cleaner or Screamin’ Eagle Wedge
cleaner cover. High-Flow Air Cleaner.
61300892
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with G. NOSTALGIC BAR & SHIELD LOGO AIR
Original Equipment perimeter bolt air cleaner cover. CLEANER COVER
Get a polished look with an extra dose of heritage with the
B. AIR CLEANER TRIM – BAR & SHIELD Nostalgic Collection – chrome-plated air cleaner covers
Styled to complement polished or blacked-out engines, this featuring an original-style Bar & Shield logo and a stamped
rich black bullet-hole air cleaner trim features a simple etched “Made in U.S.A.” An easy-to-install trip down memory lane,
Bar & Shield logo at its center. Easy to install, this self-adhe- each cover is hand-polished and chrome-plated to a bril-
sive formed aluminum trim fits perfectly into the recessed liant finish. Available in oval and round configurations, the
face of the Softail models Original Equipment perimeter bolt air cleaner kit includes polished stainless steel mounting
air cleaner cover. hardware.
61300891 29765-01 Oval Twin Cam.
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with Fits ’04-’07 EFI Dyna®, ’01-’16 Softail® (except carbureted
Original Equipment perimeter bolt air cleaner cover. California and ’08-later FLS, FLSS, FLSTFBS, FLSTSB and
A. DARK CUSTOM LOGO COLLECTION – AIR B. AIR CLEANER TRIM – BAR & SHIELD F. MILWAUKEE-EIGHT ENGINE AIR CLEANER G. NOSTALGIC BAR & SHIELD LOGO AIR FXS) and ’02-’13 later Touring and Trike models (except
C. AIR CLEANER TRIM – BRUSHED ALUMINUM CLEANER TRIM COVER – GLOSS BLACK CLEANER COVER – OVAL TWIN CAM carbureted California). If installed with Screamin’ Eagle®
Show off your Milwaukee-Eight® engine’s displacement with High-Flow Air Cleaner Kits, requires the separate purchase of
pride. Available for 107- and 114-cubic-inch engines, this Gasket P/N 29591-99.
brushed aluminum and black trim is the perfect comple- 29138-91A Round.
ment to chrome or black engine finishes. This easy-to-install Fits ’90-’99 carbureted (CV) Evolution® 1340-equipped
self-adhesive formed aluminum trim fits perfectly into the models. Also fits ’07-later XL and ’99-’17 Twin Cam models
recessed face of the Softail models Original Equipment perim- equipped with Screamin’ Eagle High-Flow Air Cleaners
eter bolt air cleaner cover. (round filter) when installed with Gasket Kit P/N 29591-99
61300788 107 Logo. (sold separately).
Fits ’18-later FLFB, FLSB, FXBB, FXBR and FXFB models with
Original Equipment perimeter bolt air cleaner cover. H. SMOOTH AIR CLEANER COVER
Wrap your Screamin’ Eagle round air cleaner element in style.
D. AIR CLEANER COVER – GLOSS BLACK The mirror chrome low-profile Air Cleaner Cover shields the
Complete the blacked-out look. Original Equipment on the element and opens breathing space between the backing
FLSS model, this Gloss Black Air Cleaner Cover adds a sinis- plate and the cover. Cut-away bottom design exposes the air
ter touch without changing the signature profile of your late cleaner element to maximize the airflow. Easy to install, the
model Twin Cam motor. one-piece cover is the ideal complement to the Chrome Air
Cleaner Back Plate P/N 29510-05.
61300536
Fits ’16-’17 Softail (except FLSTFBS) and ’14-’16 Touring and 29153-07
Trike models (except CVO™) with Original Equipment Air Fits ’07-later XL models equipped with Screamin’ Eagle
Cleaner or models equipped with Screamin’ Eagle Round Round Filter Air Cleaner Kits and ’99-’17 Twin Cam models
High-Flow Air Cleaner P/N 29400233 or 29400234. equipped with Screamin’ Eagle Round High-Flow Air Cleaner
Kits.
E. SCREAMIN’ EAGLE® VENTILATOR ELITE AIR
CLEANER COVER I. BOBBER-STYLE ROUND AIR CLEANER COVER
Add a luxurious finishing touch to your Ventilator Air Cleaner. Low-profile round air cleaner cover adds an attractive nostal-
Designed as a direct replacement for the Screamin’ Eagle® gic look to any bike’s profile. The cover features a cut-away
and CVO™ Ventilator Air Cleaners, this easy-to-install cover bottom design that exposes the filter element to maximize
features a sleek center bar design surrounded with carbon the airflow when installed with a Screamin’ Eagle High-Flow
fiber inserts. Kit includes low-profile cover, diamond-cut Air Cleaner Kit.
Screamin’ Eagle medallion and chrome mounting hardware.
C. AIR CLEANER TRIM – BRUSHED ALUMINUM D. AIR CLEANER COVER – GLOSS BLACK G. NOSTALGIC BAR & SHIELD LOGO H. SMOOTH AIR CLEANER COVER Fits ’12-’16 XL1200V and ’11-’15 FLS and FXS models with
Fits ’10-’17 Dyna®, ’09-’16 Softail®, ’09-’16 Touring and Trike AIR CLEANER COVER – ROUND Original Equipment round air cleaner. Also fits models
models equipped with Ventilator Air Cleaner Kits. Also fits equipped with Screamin’ Eagle Round High-Flow Air Cleaner
Dyna HO103 and CVO™ models with Original Equipment Kits.
Ventilator Air Cleaner. 61300120 Chrome.
61300516 Chrome. 61300128 Gloss Black.
61300517 Gloss Black.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
E. SCREAMIN’ EAGLE VENTILATOR ELITE AIR E. SCREAMIN’ EAGLE VENTILATOR ELITE AIR I. BOBBER-STYLE ROUND AIR CLEANER I. BOBBER-STYLE ROUND AIR CLEANER
CLEANER COVER – CHROME CLEANER COVER – GLOSS BLACK COVER – CHROME COVER – GLOSS BLACK
464 ENGINE TRIM ENGINE TRIM 465
Oil Temp & Level Oil Level Dipsticks & Fuel Lines
A. OIL LEVEL AND TEMPERATURE DIPSTICK WITH C. CHROME OIL DIPSTICK
LIGHTED LCD READOUT Easy-to-install chrome-plated oil dipstick adds a finishing
New and improved capacitive level sensing technology touch and shows your attention to detail.
provides the highest degree of accuracy and durability. Now 62693-07A Fits ’07-later Touring models.
available in chrome and black, these dipsticks allow you to
62858-99 Fits ’99-’06 Touring models.
check your oil level and oil temperature with the push of a
button. Add function and style by replacing your stock dipstick
with this hard-working version. No more grabbing a rag to pull D. SPEED-CHECK TRANSMISSION DIPSTICK
your hot dipstick. No more oil drips on your pipes and on the This decorative and functional dipstick is hand-operated, elim-
garage floor. Simply push the button and this dipstick lights inating the need for a wrench. It has a Bar & Shield logo and
up with a brilliant backlight. Oil level is indicated by a four- is easy to install.
segment readout–it even reminds you to check your oil when 37103-08
it is hot. Designed to be waterproof, the LCD (liquid crystal Fits ’06-’17 Dyna (except models with ABS), ’07-’17 Softail®,
display) readout operates on a long-lasting, replaceable lith- and ’07-’16 Touring and Trike models. Will not fit Touring
ium coin-type battery (CR2032 3V, P/N 91800066). Display models equipped with Engine/Transmission Interface Cover
features a low battery indicator and press-and-hold feature to P/N 66532-07.
toggle between Fahrenheit and Celsius.
E. SPEED CHECK TRANSMISSION DIPSTICK –
Fits ’04-later XL and XR models. GLOSS BLACK
62700009 Chrome. This decorative and functional dipstick is hand-operated, elim-
62700011 Gloss Black. inating the need for a wrench. Finished in an elegant gloss-
black to complete the Dark Custom transition.
Fits ’06-’17 Dyna® models (except FLD).
62700192
63065-09A Gloss Black. Fits ’06-’17 Dyna (except models with ABS), ’07-’17 Softail,
A. OIL LEVEL AND TEMPERATURE DIPSTICK – A. OIL LEVEL AND TEMPERATURE DIPSTICK – C. OIL DIPSTICK – ’06-LATER DYNA D. SPEED-CHECK TRANSMISSION DIPSTICK – and ’07-’16 Touring and Trike models. Will not fit Touring
Fits ’00-’17 Softail® models (except FXCW, FXCWC, FXSB, CHROME (DYNA SHOWN) BLACK (DYNA SHOWN) (37103-08 SHOWN) models equipped with Engine/Transmission Interface Cover
FXSBSE, FXSE and ’09 FXSTSSE).
P/N 66532-07.
62955-09A Chrome.
63055-09A Gloss Black. F. FUEL TANK FITTING COVER
This classic chrome styled two-piece die-cast cover conceals
Fits ’08-’17 FXCW, FXCWC, FXSB, FXSBSE, FXSE and ’09
the EFI fuel line fitting below the tank. Easy to install, the kit
FXSTSSE models.
includes chrome-plated hardware and hex key wrench.
63002-09A Chrome.
62809-06
Fits ’17-later Touring models. Fits ’04-’07 fuel injected Dyna, ’02-’17 fuel injected Softail
62700180 Chrome. and ’03-’16 fuel injected Touring and Trike models.
62700194 Gloss Black. G. BRAIDED STAINLESS STEEL EFI FUEL LINE
Fits ’07-’16 Touring models (except models equipped with a Add a finishing touch to the fuel-injected Dyna with this
Sidecar). Will not fit Touring models equipped with Engine/ Braided Stainless Steel Fuel Line. Complete replacement line
Transmission Interface Cover P/N 66532-07. includes pre-installed fuel tank and EFI module connectors.
63004-09A Chome. 63020-04
63030-09A Gloss Black. Fits ’04-’05 EFI Dyna models.
Fits ’02-’06 Touring models (except models equipped H. BRAIDED STAINLESS STEEL FUEL CROSSOVER LINE
with a Sidecar). Also fits ’99-’01 Touring models equipped A beautifully Braided Stainless Steel Fuel Line accented with
with Chrome Oil Filler Spout P/N 62470-02, 62453-02 or highly polished chrome fittings for your front fuel tank cross-
62454-02A. over. Innovative fittings are designed to eliminate unsightly
62946-09A Chrome. hose clamps.
63131-09A Gloss Black. 63698-02 Fits ’97-’07 Touring models.
63692-00A
Fits ’09-’16 Trike models. Also fits ’09-’16 Touring models
Fits ’00-’17 Softail models (except FXCW, FXCWC and
equipped with a sidecar.
FXSTD).
62700005A Chrome.
Also available:
A. OIL LEVEL AND TEMPERATURE DIPSTICK – A. OIL LEVEL AND TEMPERATURE DIPSTICK – E. SPEED CHECK TRANSMISSION DIPSTICK F. FUEL TANK FITTING COVER
LCD DIPSTICK BATTERY AND SEAL KIT
Kit includes CR2032 3V Lithium Replacement Battery and
CHROME (SPORTSTER SHOWN) BLACK (SOFTAIL SHOWN)
waterproof seal kit.
91800066
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
B. OIL DIPSTICK WITH TEMPERATURE GAUGE B. OIL DIPSTICK WITH TEMPERATURE GAUGE G. BRAIDED STAINLESS STEEL EFI FUEL LINE H. BRAIDED STAINLESS STEEL
(SOFTAIL SHOWN) (’04-LATER SPORTSTER SHOWN) FUEL CROSSOVER LINE
466 ENGINE TRIM ENGINE TRIM 467
Cylinder Head Covers Docking Hardware Covers
A. FINNED HEADBOLT BRIDGE F. REAR DOCKING HARDWARE COVER KIT
This exclusive aluminum Finned Headbolt Bridge covers both Disguise the rear docking hardware with these easy-to-install
headbolts and the spark plug, filling out your cylinder fins all covers. The caps slide over the exposed docking points, and
the way to the rocker box. Featuring an engraved Bar & Shield are held in place by a strong magnetic pull. The caps are easy
emblem, the bridge is easy to install with unique headbolt to remove when you wish to reinstall detachable accessories.
mounts. All necessary mounting hardware included. Sold in Covers are available with brilliant chrome or durable gloss
pairs. black finish to match your bike’s attitude. Sold in pairs.
43859-00 Black Highlighted. Fits many accessory docking hardware kits. Refer to the
Fits ’99-’17 Twin Cam-equipped models with electronic fuel fitment matrix below or the Parts & Accessories section of
injection and ’00-later FXSTD models. www.harley-davidson.com for details.
61400148 CVO™ Granite Highlighted.
48218-10 Short Chrome (pair).
Fits ’99-’17 Twin Cam-equipped models with electronic fuel
injection and ’00-later FXSTD models. 48220-10 Large Chrome (pair).
61400176 Solid Black. 48035-09 Small Chrome (pair).
Fits ’04-later XL models. 48221-10 Short Black (pair).
A. FINNED HEADBOLT BRIDGE – BLACK A. FINNED HEADBOLT BRIDGE – CVO GRANITE F. REAR DOCKING HARDWARE COVER KIT – CHROME 48223-10 Large Black (pair).
B. HEADBOLT BRIDGE – CHROME HIGHLIGHTED HIGHLIGHTED 48225-10 Small Black (pair).
This exclusive Headbolt Bridge covers both the headbolts and
spark plug with a splash of chrome and an engraved Bar &
Shield emblem. Easy to install with unique headbolt mounts.
Kit includes all necessary mounting hardware. Sold in pairs.
43858-00
Fits ’99-’17 Twin Cam-equipped models. (Will not fit with
Screamin’ Eagle® heads or 110CI or 117CI engines.)
44432-04
Fits ’04-later XL and XR models.
C. SPARK PLUG COVER KITS Large Chrome Small Chrome Short Chrome
Quickly slips over spark plug for a secure fit.
32747-99 Classic Chrome.
Fits ’99-’17 Twin Cam-equipped models.
32745-99 H-D Motor Co. Logo.
Fits ’99-’17 Twin Cam-equipped models.
D. HEADBOLT COVERS
Precision-machined of high-quality aluminum and manu-
factured in the U.S.A. Hand-polished and chrome-plated.
Large Black Small Black Short Black
Available in a variety of styles to match your customizing
direction, these kits include 4 easy-to-install headbolt covers, A. FINNED HEADBOLT BRIDGE – B. HEADBOLT BRIDGE – CHROME F. REAR DOCKING HARDWARE COVER KIT – BLACK
set screws and an Allen® wrench for easy installation. SOLID BLACK
Fits ’86-later XL, ’08-’13 XR, ’85-’99 Evolution 1340 and ’99-’17
Twin Cam models. Large Small Short
1. 43822-01 Chrome. Docking Kit Chrome: 48220-10 Chrome: 48035-09 Chrome: 48218-10
Part Number Fitment Black: 48223-10 Black: 48225-10 Black: 48221-10
2. 43896-99 Gloss Black.
3. 43911-95 Chrome Bar & Shield Logo.
4. 43884-96 Chrome H-D Motor Co. Logo. XL Models
53529-04 Fits ’04-later XL (some black) models. — 1 1
E. CLASSIC CHROME ROCKER BOX BOLT COVERS 53532-02 Fits ’02-’03 XL (with bags) models. 1 — —
Matching the styling of our classic chrome headbolt covers,
these chrome-plated Rocker Box Bolt Covers add chrome to 90465-98A Fits ’94-’01 XL (with bags) models. 1 — —
your engine. Easy to install, the covers are held in place by a
spring steel clip. Sold in packages of four. Dyna® Models
43868-99 53961-06 Fits ’06-’17 Dyna® (FXD/L) models. — 1 1
Fits ’99-’17 Twin Cam-equipped models.
53964-06B Fits ’08-’17 FXDF, ’09-’10 FXDFSE and ’06-’08 FXDWG models. — 1 1
54097-10 Fits ’10-’17 FXDWG (black) models. — 1 1
53797-09 Fits ’09-’17 FXDB (black) models. — 1 1
53858-01 Fits ’96-’01 FXDWG (except FXDWG2) models. 1 — —
Touring Models
1 2 52300131 Fits ’14-later Touring (4pt) chrome models. — 2 —
52300353 Fits '14-later Touring (4pt) chrome models — 2 —
52300354 Fits '14-later Touring (4pt) black models — 2 —
54205-09 Fits ’09-’13 Touring (4pt) chrome models. — 2 —
54246-09 Fits ’09-’13 Touring (4pt) black models. — 2 —
54030-09 Fits ’09-’13 Touring (2pt) chrome models. — 1 —
ENGINE TRIM
54249-09 Fits ’09-’13 Touring (2pt) black models. — 1 —
3 4 53803-06 Fits ’97-’08 Touring (front) models. — 1 —
53804-06 Fits ’94-’08 Touring (rear) models. 1 1 —
53988-07 Fits ’07-’08 FLHRSE3/4 models. — 1 1
Model Family Fitment:
SOFTAIL TOURING
D. HEADBOLT COVERS E. CLASSIC CHROME ROCKER BOX BOLT
COVERS
468 ENGINE TRIM ENGINE TRIM 469
Hardware Covers Hardware Covers
A. CLASSIC COVERS KIT B. CHROME SOCKET HEAD SCREW COVER KIT
Customize your bike down to the last detail. These hardware Finish the show-winning look with these easy-to-install hard-
Cover Kits include the chrome-plated ABS caps and plugs in ware covers. These machined brass and chrome-plated covers
the sizes and styles required to dress the viewable hardware are corrosion resistant, and the internal spring steel retention
on the motorcycle. Classic Covers are available as complete clip resists vibration and thermal cycling to securely hold the
Bike Kits with the covers for both engine and chassis hardware, covers in place.
or as engine-only kits to dress the Twin Cam or XL engine. The 94830-02
kits are easy to install, with no tools required. Fits 1/4" socket head screws with hex drive (pkg. of 10).
94923-09 Bike Kit. 94832-02
Fits ’09-’17 Softail® models (except FLS, FLSS, FLSTSB, Fits 5/16" socket head screws with hex drive (pkg. of 4).
FXCW, FXCWC and FXSE).
94834-02
94924-09 Bike Kit. Fits 3/8" socket head screws with hex drive (pkg. of 4).
Fits ’09-’13 Touring and Trike models.
94943-07 Engine Kit. C. CHROME ALLEN® HOLE PLUGS
Fits Twin Cam-equipped models. 94130-93T 1/4" (pkg. of 10).
B. CHROME SOCKET HEAD SCREW COVER KIT
94131-93T 5/16" (pkg. of 10).
94132-93T 3/8" (pkg. of 10).
Intended Fastener Part Number 94923-09 94924-09 94943-07 H. CHROME DERBY COVER SCREW KIT
Dress up accessory derby covers by replacing the stock zinc-
1/4" socket head cap screw 94903-07 50 55 50 plated screws with brilliant chrome.
5/16" socket head cap screw 94904-07 11 8 7 25913-99
Fits ’99-later Dyna®, Softail, Touring and Trike models. Kit
5/16" socket head cap screw (plug) 94905-07 4 — — contains five chrome-plated button head Torx screws and
five stainless steel washers.
3/8" socket head cap screw 94906-07 6 3 3
94630-98 Fits Evolution 1340 models.
5/16" special hex screw (angled cap) 94907-07 8 8 8 Kit includes three button head Torx screws and oil seals.
94631-98 Fits ’94-’03 XL models.
5/16" T40 Torx® button head screw 94908-07 5 10 — 94207-04 Fits ’04-later XL models.
3/8" T45 Torx button head screw 94909-07 5 — —
ENGINE TRIM
5/16" hex bolt (1/2" hex) 94918-07 4 10 8
SOFTAIL TOURING
G. CHROME TIMER COVER SCREW KIT – H. CHROME DERBY COVER SCREW KIT –
TWIN CAM SHOWN TWIN CAM SHOWN
470 ENGINE TRIM ENGINE TRIM 471
Black Hardware Kits Chrome Hardware Kits
A. BLACK HARDWARE KITS – ENGINE B. CHROME HARDWARE KIT – PRIMARY COVER
Durable and easy to install, this gloss-black engine hardware Kit includes the hardware required to replace the visible set of
adds a custom touch to the blacked-out look of your motor- zinc-plated fasteners on the outer primary cover. Inspection
cycle. Kits include the hardware required to replace all of the and derby cover hardware included. Lock patch included
visible zinc-plated fasteners on the vehicle’s engine, primary, where required.
rocker boxes, derby or cam covers. Lock patch included where 94281-04 Fits ’04-later XL models.
required.
C. CHROME HARDWARE KIT – GEARCASE/FRONT
BLACK HARDWARE KIT – FULL ENGINE SPROCKET COVER
Includes the hardware required to replace the visible set of Kit includes the hardware required to replace the visible set of
zinc-plated fasteners on the primary cover, derby cover, trans- zinc-plated fasteners on the gearcase and front sprocket cover.
mission side and top covers, tappet covers, cam covers and Lock patch included where required.
rocker box covers.
94280-04 Fits ’04-later XL models.
12600251
Fits ’17-later Touring and Trike models. D. CHROME HARDWARE KIT – TRANSMISSION
12600256 A. BLACK HARDWARE KITS – FULL ENGINE Kit includes the hardware required to replace the visible set
Fits ’18-later Softail® models. ’18 models (except FLSB) (12600251 SHOWN) of zinc-plated fasteners on the transmission top cover, bear-
require additional purchase of Derby Cover Kit ing housing assembly and clutch release cover. Lock patch
P/N 12600255. included where required.
Includes the hardware required to replace the visible set of 94056-03 Fits ’99-’05 Dyna® models.
zinc-plated fasteners on the primary cover, derby cover, gear 94055-03 Fits ’00-’06 Softail® models.
case and transmission sprocket covers, tappet covers and 94054-03 Fits ’99-’06 Touring models.
rocker box covers. 34856-06A
B. CHROME HARDWARE KIT – PRIMARY COVER C. CHROME HARDWARE KIT –
12600260 (SPORTSTER SHOWN) GEARCASE/FRONT SPROCKET COVER Fits ’06-’17 Dyna and ’07-’17 Softail and Touring models.
Fits ’04-later XL models.
E. CHROME HARDWARE KIT – ROCKER BOX
BLACK HARDWARE KIT – PRIMARY COVER Kit includes the hardware required to replace the visible set
12600252 of zinc-plated fasteners on rocker box covers. Lock patch
Fits ’17-later Touring and Trike models. included where required.
12600257 94291-04A Fits ’04-later XL models.
Fits ’18-later Softail models. 94059-03
Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and
BLACK HARDWARE KIT – TRANSMISSION Trike models.
12600253
Fits ’18-later Softail and ’17-later Touring and Trike models. F. CHROME HARDWARE KIT – CAM COVER
Kit includes the hardware required to replace the visible set of
BLACK HARDWARE KIT – ROCKER BOX zinc-plated fasteners on the cam cover. Cam position sensor
12600254 cover hardware included. Lock patch included where required.
A. BLACK HARDWARE KIT – FULL ENGINE A. BLACK HARDWARE KIT – PRIMARY COVER
Fits ’18-later Softail and ’17-later Touring and Trike models. (12600251 SHOWN) (12600252 SHOWN) 94058-03
12600263 Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and
Fits ’04-later XL models. Trike models.
BLACK HARDWARE KIT – CAM COVER AND G. CHROME HARDWARE KIT – LIFTER/TAPPET BLOCK
TAPPET COVERS Kit includes the hardware required to replace the visible set
12600262 of zinc-plated fasteners on lifter block covers. Lock patch
Fits ’04-later XL models. included where required.
12600258 94068-03
Fits ’18-later Softail and ’17-later Touring and Trike models. Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and
Trike models.
BLACK HARDWARE KIT – DERBY COVER
12600259
Fits ’19-later Softail and ’18-later FLSB models.
12600255 D. CHROME HARDWARE KIT – TRANSMISSION E. CHROME HARDWARE KIT – ROCKER BOX
Fits ’06-’17 Dyna®, ’08-’18 Softail (except FLSB) and ’08-later (SOFTAIL SHOWN) (BIG TWIN SHOWN)
Touring and Trike models.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
A. BLACK HARDWARE KIT – CAM COVER AND A. BLACK HARDWARE KIT – DERBY COVER F. CHROME HARDWARE KIT – CAM COVER G. CHROME HARDWARE KIT – LIFTER/TAPPET
TAPPET COVERS (12600255 SHOWN) BLOCK (BIG TWIN SHOWN)
(12600258 SHOWN)
472 ENGINE TRIM ENGINE TRIM 473
Chrome Hardware Chrome Hardware
A. WINDSHIELD ACORN NUT KIT G. CHROME SMOOTH SOCKET HEAD SCREWS
Kit contains 10 chrome-plated low crown 12-24 acorn nuts. Available in 1/4-inch, 5/16-inch and 3/8-inch coarse and
94111-95 fine thread, up to 3 inches long. See your Dealer for more
Fits Compact, King-Size, Convertible and Road King® information.
windshields (pkg. of 10).
H. CHROME HEX HEAD SCREWS
B. CHROME ACORN NUT KITS Available in 1/4-inch, 5/16-inch and 3/8-inch coarse and
fine thread, up to 3 inches long. See your Dealer for more
94116-93T 10 – 32 thread (pkg. of 5).
information.
94117-93T 1/4" – 20 thread (pkg. of 5).
94119-93T 5/16" – 18 thread (pkg. of 4). I. CHROME 12-POINT SCREWS
94120-93T 5/16" – 24 thread (pkg. of 4). Available in 1/4-inch, 5/16-inch and 3/8-inch coarse thread,
94121-93T 3/8" – 16 thread (pkg. of 3). up to 2-1/4 inches long. Grade 8. See your Dealer for more
94122-93T 3/8" – 24 thread (pkg. of 3). information.
94124-93T 7/16" – 20 thread (pkg. of 2).
G. CHROME SMOOTH SOCKET HEAD SCREWS H. CHROME HEX HEAD SCREWS J. CHROME FLAT-HEAD SCREWS
94125-93T 1/2" – 13 thread (pkg. of 1). When the details matter, even your screws are chromed.
94126-93T 1/2" – 20 thread (pkg. of 1). These Grade 8 Hex Drive screws are available in 17 different
94127-93T 5/8" – 18 thread (pkg. of 1). sizes. See your Dealer for more information.
C. CHROME TORX® BUTTON HEAD SCREWS K. CHROME LOCK NUTS WITH NYLON INSERTS
Available in 1/4-inch, 5/16-inch and 3/8-inch coarse thread, Available in 10-24, 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch
up to 2-1/4 inches long. Grade 8. See your Dealer for more and 5/8-inch sizes, coarse and fine thread. See your Dealer
information. A. WINDSHIELD ACORN NUT KIT B. CHROME ACORN NUT KITS for more information.
ENGINE TRIM
Model Family Fitment:
SOFTAIL TOURING
E. CHROME TORX SOCKET HEAD SCREWS F. CHROME SOCKET HEAD SCREWS M. CHROME FLAT WASHERS N. CHROME LOCK WASHERS
CONTROLS
The most visual contact point you have with
your motorcycle is where your hands and feet
meet the controls. Choose a handlebar suitable
for your physical needs. Then select grips, hand
controls, footpegs and mirrors to underscore the
style of your ride.
476 CONTROLS CONTROLS 477
Hand & Foot Controls Collection Hand & Foot Controls Collection
EMPIRE™ COLLECTION - CHROME EMPIRE™ COLLECTION - BLACK MACHINE CUT
Raise the stakes. Brilliant chrome highlights the deep grooves Raise the stakes. Milled highlights reveal gleaming billet
that add eye-catching depth and detail to this complete aluminum below the rich black anodized surface, while deep
CONTROLS
collection of hand and foot controls. Executed in durable cast grooves add eye-catching depth and detail to each component
and billet aluminum, the Chrome Empire™ Collection adds in this complete collection of hand and foot controls. Executed
captivating custom detail that complements other chrome in durable cast and billet aluminum, the Black Machine Cut
accessories. Empire™ Collection adds captivating custom detail that
complements black or machine cut accessories.
A. EMPIRE COLLECTION HAND GRIPS – CHROME
56100427 F. EMPIRE COLLECTION HAND GRIPS – BLACK
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ’16-later MACHINE CUT
Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 56100429
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-later Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ’16-later
FLTRXSE) and Trike models. Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-later
B. EMPIRE COLLECTION FOOTBOARDS – CHROME A. EMPIRE HAND GRIPS – CHROME F. EMPIRE HAND GRIPS – MACHINE CUT FLTRXSE) and Trike models.
50501932 Rider.
Fits ’12-’16 FLD, ’00-’17 FL Softail®, ’00-later Touring (except G. EMPIRE COLLECTION FOOTBOARDS – BLACK
FLHTCUL and FLHTKL), and ’09-’13 Trike models. Installation MACHINE CUT
on ’00-’17 Softail® FLS, FLSS, FLSTFB, FLSTFBS and FLSTN 50501934 Rider.
models requires separate purchase of Jiffy Stand P/N Fits ’12-’16 FLD, ’00-’17 FL Softail®, ’00-later Touring (except
50087-07A. Not for use with Ergo Jiffy Stand P/N 50000091 FLHTCUL and FLHTKL), and ’09-’13 Trike models. Installation
or Jiffy Stand Extension Kit P/N 50233-00, 50000008 or on ’00-’17 Softail® FLS, FLSS, FLSTFB, FLSTFBS and FLSTN
50000023. models requires separate purchase of Jiffy Stand P/N
50501945 Rider. 50087-07A. Not for use with Ergo Jiffy Stand P/N 50000091
Fits ’18-later FL Softail models equipped with rider or Jiffy Stand Extension Kit P/N 50233-00, 50000008 or
footboards. 50000023.
50501950 Passenger. 50501939 Rider.
Fits ’06-’17 Dyna®, ’00-’17 Softail and ’86-later Touring Fits ’18-later FL Softail models equipped with rider
models equipped with passenger footboard support. Does footboards.
not fit Trike Models. 50501952 Passenger.
Fits ’06-’17 Dyna®, ’00-’17 Softail and ’86-later Touring
C. EMPIRE COLLECTION BRAKE PEDAL PADS – CHROME models equipped with passenger footboard support. Does
50600459 Small. not fit Trike Models.
Fits ’15-’20 XG models (except XG750A), ’14-later XL models
with Extended Reach Forward Control Kit P/N 50700030, H. EMPIRE COLLECTION BRAKE PEDAL PADS – BLACK
’93-‘17 Dyna® models with forward controls, and ’84-’17 FX MACHINE CUT
Softail® models (except FXSTDSE). Also fits ’18-later FXBR, 50600457 Small.
FXBRS, FLSB models and ’18-later Softail® models equipped B. EMPIRE RIDER FOOTBOARD – CHROME B. EMPIRE PASSENGER FOOTBOARD – CHROME G. EMPIRE RIDER FOOTBOARD – MACHINE CUT G. EMPIRE PASSENGER FOOTBOARD – Fits ’15-’20 XG models (except XG750A), ’14-later XL models
with Billet Style Rear Brake Lever for Forward Controls P/N MACHINE CUT with Extended Reach Forward Control Kit P/N 50700030,
41600218, 41600219 and 41600220 ’93-‘17 Dyna® models with forward controls, and ’84-‘17 FX
50600465 Large. Softail® models (except FXSTDSE). Also fits ’18-later FXBR,
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and FXBRS, FLSB models and ’18-later Softail® models equipped
Trike models. with Billet Style Rear Brake Lever for Forward Controls P/N
41600218, 41600219 and 41600220
50600468 Large.
Fits ’18-later FL Softail® models equipped with rider 50600463 Large.
footboards. Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
Trike models.
D. EMPIRE COLLECTION FOOTPEGS – CHROME 50600466 Large.
50501898 Rider. Fits ’18-later FL Softail® models equipped with rider
Fits ’18-later FXFB, FXFBS, and ’19-’20 FXDRS models in the footboards.
rider position.
50501855 Rider.
I. EMPIRE COLLECTION FOOTPEGS – BLACK MACHINE
Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXLR,
CUT
FXLRS, FXBR, FXBRS, and FXST models. 50501900 Rider.
Fits ’18-later FXFB, FXFBS, and ’19-’20 FXDRS models in the
50501830 Passenger.
rider position.
Fits ’18-later Softail® models in the passenger position.
50501857 Rider.
50502111 Passenger.
Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXLR,
Fits passenger position on ’10-later FLHX, FLHXS, FLHXST,
FXLRS, FXBR, FXBRS, and FXST models.
FLHXSE, FLTRX, FLTRXS, FLTRXST,and FLTRXSE.
50501832 Passenger.
50501895 Highway.
C. EMPIRE BRAKE PADS – CHROME D. EMPIRE RIDER FOOTPEGS – CHROME H. EMPIRE BRAKE PADS – MACHINE CUT I. EMPIRE RIDER FOOTPEGS – MACHINE CUT Fits ’18-later Softail® models in the passenger position.
Fits models using highway peg mounts and engine guard peg
mounts P/N 50957-02C, 54234-10A, 50829-07A, 50830- 50502113 Passenger.
07A, 50500167, 50500168, 50832-07A and 50964-98. Fits passenger position on ’10-later FLHX, FLHXS, FLHXST,
FLHXSE, FLTRX, FLTRXS, FLTRXST, and FLTRXSE models.
E. EMPIRE COLLECTION SHIFTER PEG – CHROME 50501897 Highway.
33600335 Fits models using highway peg mounts and engine guard peg
Fits all models (except ’06-’17 VRSC™ models with forward mounts P/N 50957-02C, 54234-10A, 50829-07A, 50830-
controls and ’08-’13 XR models). 07A, 50500167, 50500168, 50832-07A and 50964-98.
Fits all models (except ’06-’17 VRSC™ models with forward J. EMPIRE COLLECTION SHIFTER PEG – BLACK
controls and ’08-’13 XR models). MACHINE CUT
33600333
Fits all models (except ’06-’17 VRSC™ models with forward
controls and ’08-’13 XR models).
SOFTAIL TOURING
D. EMPIRE PASSENGER FOOTPEGS – CHROME E. EMPIRE SHIFTER PEG – CHROME I. EMPIRE PASSENGER FOOTPEGS – MACHINE J. EMPIRE SHIFTER PEG – MACHINE CUT
CUT
478 CONTROLS CONTROLS 479
Hand & Foot Controls Collection Hand & Foot Controls Collection
EMPIRE™ COLLECTION – BLACK F. 80GRIT™ RIDER FOOTBOARDS
Raise the stakes. Deep grooves add eye-catching depth and When the road bites, bite back. With durable cast aluminum
detail to the rich black anodized finish on this complete collec- and rugged style edges this BMX-inspired footboard grips your
CONTROLS
tion of hand and foot controls. Executed in durable cast and boot for unmatched stability and traction, giving you the confi-
billet aluminum, the Black Empire™ Collection adds captivat- dence to ride as hard as you like.
ing custom detail that complements other black and machine
cut accessories. Fits ’14-later Touring models.
50501602 Raw.
A. EMPIRE COLLECTION HAND GRIPS – BLACK 50501604 Black.
56100428
Fits ’18-later FL Softail® models equipped with rider
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ‘16-later
footboards.
Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-later 50501612 Raw.
FLTRXSE) and Trike models. 50501613 Black.
B. EMPIRE COLLECTION FOOTBOARDS – BLACK A. EMPIRE HAND GRIPS – BLACK F. 80GRIT RIDER FOOTBOARDS G. 80GRIT BRAKE PEDAL PAD
50501933 Rider. This BMX-inspired brake pedal pad features rugged styled
Fits ’12-’16 FLD, ’00-’17 FL Softail®, ’00-later Touring (except edges for superior grip and a bold, stripped-down look.
FLHTCUL and FLHTKL), and ’09-’13 Trike models. Installation Fits ’18-later FLSL, FLDE, FLFB, FLFBS, FLHC, and FLHCS
on ’00-’17 Softail® FLS, FLSS, FLSTFB, FLSTFBS and FLSTN models equipped with Endgame Brake Lever P/N 41600299
models requires separate purchase of Jiffy Stand P/N or 41600298 and ’14-later Touring models equipped with
50087-07A. Not for use with Ergo Jiffy Stand P/N 50000091 Endgame Brake Lever P/N 41600305 or P/N 41600304.
or Jiffy Stand Extension Kit P/N 50233-00, 50000008 or
50000023. 50600425 Raw.
50501938 Rider. 50600424 Black.
Fits ’18-later FL Softail models equipped with rider
footboards. H. 80GRIT™ FOOTPEGS
Combine form and function with the feel of an old-school
50501951 Passenger. BMX-style footpeg. The aluminum material with rugged styled
Fits ’06-’17 Dyna®, ’00-’17 Softail and ’86-later Touring edges is lightweight and grips the bottom of your boot, giving
models equipped with passenger footboard support. Does you an unmatched feeling of confidence. Black Anodized or
not fit Trike Models. Raw finishes provide custom options, while the HDMC “dog
tag”-style logo adds subtle authenticity to the bold, stripped-
C. EMPIRE COLLECTION BRAKE PEDAL PADS – BLACK down look.
50600458 Small. Rider
Fits ’15-’20 XG models (except XG750A), ’14-later XL models Fits rider position on ’20-later LiveWire®, ’18-later FXFB,
with Extended Reach Forward Control Kit P/N 50700030, FXFBS, and ’19-’20 FXDRS models.
’93-’17 Dyna® models with forward controls, and ’84-’17 FX
Softail® models (except FXSTDSE). Also fits ’18-later FXBR, 50501383 Black.
FXBRS, FLSB models and ’18-later Softail® models equipped B. EMPIRE RIDER FOOTBOARD – BLACK B. EMPIRE PASSENGER FOOTBOARD – BLACK G. 80GRIT BRAKE PEDAL PAD 50501390 Raw.
with Billet Style Rear Brake Lever for Forward Controls P/N
Rider with Wear Peg
41600218, 41600219 and 41600220
Fits ’11-later XL883L and XL1200C, ’16-later XL1200CX, ’12-’16
50600464 Large. XL1200V, ’10-later XL1200X, ’18-later XL1200XS, ’14-later
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and XL models equipped with Extended Reach Forward Control
Trike models. Conversion Kit P/N 50700030, ’08-’11 FXCW and FXCWC and
50600467 Large. ’11-’17 FXS and FXSB and ’16-’17 FXSE. Does not fit ’15-later
Fits ’18-later FL Softail® models equipped with rider XG models.
footboards. 50501387 Black.
50501394 Raw.
D. EMPIRE COLLECTION FOOTPEGS – BLACK
50501899 Rider. Fits ’17-’20 XG750A and ’09-later XL883N models.
Fits ’18-later FXFB, FXFBS, and ’19-’20 FXDRS models in the 50501385 Black.
rider position. 50501392 Raw.
50501856 Rider.
Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXLR, Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXBR,
FXLRS, FXBR, FXBRS, and FXST models. FXBRS, FXLR, FXLRS and FXST models. Also fits ’18 later
50501831 Passenger. FLDE, FLHC, FLHCS, FLSL, FLFB and FLFBS models equipped
Fits ’18-later Softail® models in the passenger position. with Footboard To Footpeg Conversion Kit P/N 50501640
and ’09-later Touring models equipped with Board-To-Peg
50502112 Passenger. Conversion Kit P/N 50501642.
Fits passenger position on ’10-later FLHX, FLHXS, FLHXST,
FLHXSE, FLTRX, FLTRXS, FLTRXST, and FLTRXSE models. 50501382 Black.
50501896 Highway. 50501389 Raw.
Fits models using highway peg mounts and engine guard peg C. EMPIRE BRAKE PEDAL PADS – BLACK D. EMPIRE RIDER FOOTPEGS – BLACK H. 80GRIT RIDER FOOTPEGS – BLACK H. 80GRIT RIDER FOOTPEGS – RAW Passenger
mounts P/N 50957-02C, 54234-10A, 50829-07A, 50830- Fits passenger position on ’20-later LiveWire and ’18-later
07A, 50500167, 50500168, 50832-07A and 50964-98. Softail® models.
50501388A Black.
E. EMPIRE COLLECTION SHIFTER PEG – BLACK
50501395A Raw.
33600334
Fits all models (except ’06-’17 VRSC™ models with forward
Fits models in passenger and highway peg positions. Does not
controls and ’08-’13 XR models).
fit the rider and passenger position for ’18-later Softail models.
50501603 Raw.
50501605 Black.
SOFTAIL TOURING
D. EMPIRE PASSENGER FOOTPEGS – BLACK E. EMPIRE SHIFTER PEG – BLACK H. 80GRIT PASSENGER FOOTPEGS – BLACK H. 80GRIT PASSENGER FOOTPEGS – RAW
480 CONTROLS CONTROLS 481
Hand & Foot Controls Collection Hand & Foot Controls Collection
ENDGAME COLLECTION - GRAPHITE D. ENDGAME COLLECTION BRAKE PEDAL PAD –
Push your custom style to the edge. The Endgame collec- GRAPHITE
tion is defined by its slotted design and high-tech, industrial Showcasing a slotted design and graphite finish, these
CONTROLS
look. The intense black rubber inserts on the controls are set easy-to-install brake pedal pads complement the Endgame
against a matte graphite finish that complements black or Collection controls to give your ride a custom industrial look.
bright finishes. 50600386
Fits ’18-later FLSL, FLDE, FLFB, FLFBS, FLHC, and FLHCS
A. ENDGAME COLLECTION HAND GRIPS – GRAPHITE models equipped with Endgame Brake Lever P/N 41600299
Featuring raised black rubber inserts with a graphite surround, or 41600298 and ’14-later Touring models equipped with
these 1.5" diameter grips deliver superior control and tough Endgame Brake Lever P/N 41600305 or P/N 41600304.
industrial styling. Easy-to-install glueless design allows you to
remove grips for service without damage. E. ENDGAME COLLECTION BRAKE LEVER – GRAPHITE
56100391 Styled to complement the Endgame Collection controls, this
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ’16-later Rear Brake Lever features a slotted design that will give your
Softail® models, ’14-’15 FLSTNSE, ’11-’12 FLSTSE, ’13-’14 bike an industrial look.
FXSBSE, and ’08-later Touring (except ’18-later FLTRXSE) A. ENDGAME COLLECTION HAND GRIPS – GRAPHITE D. ENDGAME COLLECTION BRAKE D. ENDGAME COLLECTION BRAKE PEDAL PAD – 41600298
and Trike models. PEDAL PAD – GRAPHITE GRAPHITE Fits ’18-later FL Softail® models equipped with Footboards.
41600304
B. ENDGAME COLLECTION FOOTPEGS – GRAPHITE Fits ’14-later Touring and Trike models.
Finish off the high-tech, industrial look with Endgame
Footpegs. Kit includes slotted left and right footpegs with
F. ENDGAME COLLECTION SHIFTER PEG – GRAPHITE
raised diamond-tread rubber grips to help keep your feet
With its slotted design, this easy-to-install shifter peg comple-
firmly in place.
ments the high-tech, industrial look of the Endgame Collection
50501641 Rider. footpegs and footboards
Fits ’18-later FLSB, FXBB, FXBBS, FXBR, FXBRS, FXLR and
33600295
FXLRS models.
Fits ’86-later FL Softail®, ’88-later Touring and ’08-later Trike
50501643 Passenger. models equipped with Endgame Collection Shift Levers.
Fits passenger position on ’20-later LiveWire® and ’18-later
Softail models. G. ENDGAME COLLECTION SHIFT LEVER – GRAPHITE
50501645 Styled to complement the Endgame Collection controls, this
Fits models with H-D® male mount style footpeg supports Shift Lever features a slotted design that will give your bike a
(except the rider position on ’15-later XG, ’07-’10 XL883L, ’07- high-tech, industrial look.
later XL883N, XL1200N, XL1200V and XL1200X, ’11-later 33600292
XL1200C and XL1200T, ’18-later XL1200NS and XL1200XS, Fits ’86-later FL Softail, ’88-later Touring and ’08-later Trike
’08-’13 XR and ’08-’17 FXCW, FXCWC, FXS, FXSB, FXSBSE models.
and FXSE and the rider and passenger position on ’18-later
Softail models).
B. ENDGAME COLLECTION FOOTPEGS – B. ENDGAME COLLECTION FOOTPEGS – E. ENDGAME COLLECTION BRAKE LEVER – F. ENDGAME COLLECTION SHIFTER PEG –
GRAPHITE GRAPHITE GRAPHITE GRAPHITE
SOFTAIL TOURING
C. ENDGAME COLLECTION RIDER C. ENDGAME COLLECTION RIDER G. ENDGAME COLLECTION SHIFT LEVER – GRAPHITE
FOOTBOARDS – GRAPHITE FOOTBOARDS – GRAPHITE (SHOWN WITH ENDGAME COLLECTION SHIFTER PEG)
482 CONTROLS CONTROLS 483
Hand & Foot Controls Collection Hand & Foot Controls Collection
ENDGAME COLLECTION - BLACK D. ENDGAME COLLECTION BRAKE PEDAL PAD –
Push your custom style to the edge. The Endgame collection is BLACK ANODIZED
defined by its slotted design and high-tech, industrial look. The Showcasing a slotted design and black finish, these easy-to-
CONTROLS
intense black rubber and matte black finish gives you a power- install brake pedal pads complement the Endgame Collection
ful new way to highlight your high-performance machine. controls to give your ride a custom industrial look.
50600401
A. ENDGAME COLLECTION HAND GRIPS – Fits ’18-later FLSL, FLDE, FLFB, FLFBS, FLHC, and FLHCS
BLACK ANODIZED models equipped with Endgame Brake Lever P/N 41600299
Featuring raised black rubber inserts with a black surround, or 41600298 and ’14-later Touring models equipped with
these 1.5" diameter grips deliver superior control and tough Endgame Brake Lever P/N 41600305 or P/N 41600304.
industrial styling. Easy-to-install glueless design allows you to
remove grips for service without damage. E. ENDGAME COLLECTION BRAKE LEVER – BLACK
56100394 Styled to complement the Endgame Collection controls, this
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ’16-later Rear Brake Lever features a slotted design that will give your
Softail® models, ’14-’15 FLSTNSE, ’11-’12 FLSTSE, ’13-’14 performance bike an industrial look.
FXSBSE, and ’08-later Touring (except ’18-later FLTRXSE) A. ENDGAME COLLECTION HAND GRIPS – BLACK ANODIZED D. ENDGAME COLLECTION BRAKE D. ENDGAME COLLECTION BRAKE PEDAL PAD – 41600299
and Trike models. PEDAL PAD – BLACK ANODIZED BLACK ANODIZED Fits ’18-later FL Softail® models equipped with Footboards.
41600305
B. ENDGAME COLLECTION FOOTPEGS – Fits ’14-later Touring and Trike models.
BLACK ANODIZED
Finish off the high-tech, industrial look with Endgame
F. ENDGAME COLLECTION SHIFTER PEG –
Footpegs. Kit includes slotted left and right footpegs with
BLACK ANODIZED
raised diamond-tread rubber grips to help keep your foot
With its slotted design, this easy-to-install shifter peg comple-
firmly in place.
ments the high-tech, industrial look of the Endgame Collection
50501684 Rider. footpegs and footboards.
Fits ’18-later FLSB, FXBB, FXBBS, FXBR, FXBRS, FXLR and
33600303
FXLRS models.
Fits ’86-later FL Softail®, ’88-later Touring and ’08-later Trike
50501644 Passenger. models equipped with Endgame Collection Shift Levers.
Fits passenger position on ’20-later LiveWire® and ’18-later
Softail models. G. ENDGAME COLLECTION SHIFT LEVER –
50501716 BLACK ANODIZED
Fits models with H-D® male mount style footpeg supports Styled to complement the Endgame Collection controls, this
(except the rider position on ’15-later XG, ’07-’10 XL883L, ’07- Shift Lever features a slotted design that will give your bike a
later XL883N, XL1200N, XL1200V and XL1200X, ’11-later high-tech, industrial look.
XL1200C and XL1200T, ’18-later XL1200NS and XL1200XS, 33600301
’08-’13 XR and ’08-’17 FXCW, FXCWC, FXS, FXSB, FXSBSE Fits ’86-later FL Softail, ’88-later Touring and ’08-later Trike
and FXSE and the rider and passenger position on ’18-later models.
Softail models).
C. ENDGAME COLLECTION RIDER FOOTBOARDS – B. ENDGAME COLLECTION FOOTPEGS – B. ENDGAME COLLECTION FOOTPEGS – E. ENDGAME COLLECTION BRAKE LEVER – BLACK ANODIZED
BLACK ANODIZED BLACK ANODIZED BLACK ANODIZED (SHOWN WITH ENDGAME COLLECTION BRAKE PEDAL PAD)
With their slotted design, these Endgame Footboards add a
custom industrial look to your ride. These footboards feature
four raised rubber pads for superior grip and Harley-Davidson
script for added style. Kit includes left and right footboards
50501679
Fits ’18-later FL Softail models equipped with rider
footboards.
50501680
Fits ‘09-later Touring models.
B. ENDGAME COLLECTION FOOTPEGS – B. ENDGAME COLLECTION FOOTPEGS – E. ENDGAME COLLECTION BRAKE LEVER – F. ENDGAME COLLECTION SHIFTER PEG –
BLACK ANODIZED BLACK ANODIZED BLACK BLACK
SOFTAIL TOURING
C. ENDGAME COLLECTION RIDER C. ENDGAME COLLECTION RIDER G. ENDGAME COLLECTION SHIFT LEVER – BLACK ANODIZED
FOOTBOARDS – BLACK ANODIZED FOOTBOARDS – BLACK ANODIZED (SHOWN WITH ENDGAME COLLECTION SHIFTER PEG)
484 CONTROLS CONTROLS 485
Hand & Foot Controls Collection Hand & Foot Controls Collection
DOMINION™ COLLECTION – BLACK DOMINION™ COLLECTION – BRONZE
Express your bold, renegade attitude. The Dominion™ Express your bold, renegade attitude. The Dominion™
Collection Rider and Passenger Controls let you set your own Collection Rider and Passenger Controls let you set your own
CONTROLS
styling direction. Crafted from aluminum, these hand and styling direction. Crafted from aluminum, these hand and
foot controls feature a rugged machined surface and the foot foot controls feature a rugged machined surface and the foot
controls allow for interchangeable inserts in brushed black, controls allow for interchangeable inserts in brushed black,
bronze powder-coated, brushed aluminum or brushed orange bronze powder-coated, brushed aluminum or brushed orange
anodized inserts (sold separately) that allow you to create anodized inserts (sold separately) that allow you to create
your own unique look. your own unique look.
A. DOMINION COLLECTION HAND GRIPS – BLACK F. DOMINION COLLECTION HAND GRIPS – BRONZE
56100233 56100235
Fits ’15-’20 XG models (except XG750A). Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna®
56100232 (except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna® and ’11-’12 FLSTSE) and ’96-’07 Touring models.
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE A. DOMINION HAND GRIPS – BLACK F. DOMINION HAND GRIPS – BRONZE 56100234
and ’11-’12 FLSTSE) and ’96-’07 Touring models. Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ’16-later
56100231 Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
Fits ’20-later LiveWire® , ’16-’17 Dyna FXDLS and ‘16-later FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 FLTRXSE) and Trike models.
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
FLTRXSE) and Trike models. G. DOMINION COLLECTION RIDER FOOTBOARD KIT –
BRONZE
B. DOMINION COLLECTION RIDER FOOTBOARD KIT – 50500872 Rider.
BLACK Fits ’18-later FL Softail models equipped with rider
50500869 Rider. footboards.
Fits ’18-later FL Softail models equipped with rider 50501295 Rider.
footboards. Fits ’12-’16 FLD, ’00-’17 FL Softail, ’00-later Touring (except
50501294 Rider. FLHTCUL and FLHTKL), and ’09-later Trike models.
Fits ’12-’16 FLD, ’00-’17 FL Softail®, ’00-later Touring (except
FLHTCUL and FLHTKL), and ’09-later Trike models.. H. DOMINION COLLECTION BRAKE PEDAL PADS –
BRONZE
C. DOMINION COLLECTION BRAKE PEDAL PADS – 50600269 Small.
BLACK Fits ’18-later FLSB, FXBR and FXBRS models. Also fits ’18-
50600267 Small. later Softail models equipped with Billet Style Rear Brake
Fits ’18-later FLSB, FXBR and FXBRS models. Also fits ’18- Lever for Forward Controls P/N 41600218, 41600219 and
later Softail models equipped with Billet Style Rear Brake 41600220.
Lever for Forward Controls P/N 41600218, 41600219 and 50600268 Large.
41600220. B. DOMINION RIDER FOOTBOARD – BLACK C. DOMINION BRAKE PEDAL PADS – BLACK G. DOMINION RIDER FOOTBOARD – BRONZE H. DOMINION BRAKE PEDAL PADS – BRONZE Fits ’18-later FL Softail models equipped with rider
50600266 Large. (SHOWN WITH LARGE BRAKE PEDAL PAD) (SHOWN WITH LARGE BRAKE PEDAL PAD) footboards.
Fits ’18-later FL Softail models equipped with rider 50600347 Large.
footboards. Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
50600346 Large. Trike models.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
50500947 I. DOMINION COLLECTION FOOTPEGS – BRONZE
Trike models. 50500949
50500949 With Removable Wear Peg.
D. DOMINION COLLECTION FOOTPEGS – BLACK Fits models with H-D® male mount-style footpeg supports
50500947 With Removable Wear Peg. (except rider position on ’17-later XG750A, ’07-’10 XL883L,
Fits models with H-D® male mount-style footpeg supports ’07-later XL883N, XL1200N, XL1200V and XL1200X, ’11-later
(except rider position on ’17-later XG750A, ’07-’10 XL883L, XL1200C and XL1200T, ’18-later XL1200NS and Xl1200XS,
’07-later XL883N, XL1200N, XL1200V and XL1200X, ’11-later ’08-’13 XR and ’08-’17 FXCW, FXCWC, FXS, FXSB, FXSE and
XL1200C and XL1200T, ’18-later XL1200NS and XL1200XS, FXSBSE models and the rider and passenger position on ’18-
’08-’13 XR and ’08-’17 FXCW, FXCWC, FXS, FXSB, FXSE and later Softail models).
FXSBSE models and the rider and passenger position on ’18- 50500873 Rider.
later Softail models). Fits rider position on ’20-later LiveWire, ’18-later FXFB,
50500870 Rider. FXFBS, and ’19-later FXDRS models.
Fits rider position on ’20-later LiveWire, ’18-later FXFB, 50500874 Rider.
FXFBS, and ’19-later FXDRS models. Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXBR,
50500871 Rider. 50500871 50500874 FXBRS, FXLR, FXLRS and FXST models. Also fits ’18 later
Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXBR, FLDE, FLHC, FLHCS, FLSL, FLFB and FLFBS models
FXBRS, FXLR, FXLRS and FXST models. Also fits ’18 later equipped with Footboard To Footpeg Conversion Kit P/N
FLDE, FLHC, FLHCS, FLSL, FLFB and FLFBS models 50501640 and ’09-later Touring models equipped with
D. DOMINION FOOTPEGS – BLACK D. DOMINION FOOTPEGS – BLACK I. DOMINION FOOTPEGS – BRONZE I. DOMINION FOOTPEGS – BRONZE
equipped with Footboard To Footpeg Conversion Kit P/N Board-To-Peg Conversion Kit P/N 50501642.
(50500870 SHOWN) (50500873 SHOWN)
50501640 and ’09-later Touring models equipped with 50501559 Passenger.
Board-To-Peg Conversion Kit P/N 50501642. Fits models in passenger and highway peg positions. Does
50501558 Passenger. not fit the rider and passenger position for ’18-later Softail
Fits models in passenger and highway peg positions. Does models.
not fit the rider and passenger position for ’18-later Softail 50501558 50500993 Passenger.
50501559
models. Fits passenger position on ’21-later Pan America™, ’20-later
50500992 Passenger. LiveWire and ’18-later Softail models.
Fits passenger position on ’21-later Pan America™, ’20-later
LiveWire and ’18-later Softail models. J. DOMINION COLLECTION SHIFTER PEG – BRONZE
33600214
E. DOMINION COLLECTION SHIFTER PEG – BLACK Fits all models (except ’06-’17 VRSC™ models with forward
33600180 controls and ’08-’13 XR models).
Fits all models (except ’06-’17 VRSC™ models with forward
controls and ’08-’13 XR models).
SOFTAIL TOURING
D. DOMINION FOOTPEGS – BLACK E. DOMINION SHIFTER PEG – BLACK I. DOMINION FOOTPEGS – BRONZE J. DOMINION SHIFTER PEG – BRONZE
486 CONTROLS CONTROLS 487
Hand & Foot Controls Collection Hand & Foot Controls
DOMINION™ COLLECTION FOOT CONTROL INSERTS D. VOLTAIC™ HAND GRIPS
Make your bike a true custom of one. The Dominion™ Inserts These sleek, premium hand grips feature high-quality rubber
allow you to customize and personalize Dominion Collection and metal construction to provide excellent grip for comfort-
CONTROLS
accessories, so your bike is truly one of a kind. able, confident riding. Designed to complement the lines of
your motorcycle, the Voltaic™ Grips enhance the overall style
A. DOMINION COLLECTION FOOTPEG TRIM PIECE of your bike with a look that’s light, fast and agile.
Fits Dominion Footpegs. Sold in sets of 2. 56100330
50500937 Brushed Black. Fits ’20-later LiveWire® (except Europe, India, China, and
50500938 Bronze. Vietnam markets), ’16-’17 Dyna® FXDLS and ‘16-later Softail®
models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 FXSBSE, ’16-
50500939 Brushed Orange. ’17 FXSE and ’08-later Touring (except ’18-’19 FLTRXSE) and
50500940 Brushed Aluminum. Trike models.
SOFTAIL TOURING
C. DOMINION BRAKE PEDAL TRIM C. DOMINION BRAKE PEDAL TRIM G. HARLEY-DAVIDSON® BY RIZOMA - FOOTPEGS
(BLACK SHOWN)
488 CONTROLS CONTROLS 489
Hand & Foot Controls Collection Hand & Foot Controls Collection
A. WILLIE G SKULL HAND GRIPS – BLACK D. WILLIE G SKULL SHIFTER PEG – BLACK
Contrasting the sinister Willie G Skull logo surrounded by Styled to complement the Willie G Skull Collection Foot
Harley-Davidson script, the raised rubber pads add positive Controls, this easy-to-install shifter peg can be rotated to a
CONTROLS
grip and comfort for the long haul. Easy to install, these grips comfortable position and the smooth back protects the toe of
feature a glueless design that allows removal without damage. your boot from wear while shifting.
56100364 33600258
Fits ’02-’17 VRSC™, ’96-later XL ’08-’13 XR, ’91-’17 Dyna® Fits all models (except ’06-’17 VRSC™ models with forward
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE controls and ’08-’13 XR).
and ’11-’12 FLSTSE) and ’96-’07 Touring models.
56100361 E. WILLIE G SKULL FOOTBOARD INSERTS – BLACK
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later Drenched in black and styled to match the Willie G Skull
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 Collection Accessories, these footboard inserts retain the
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 cast-in vibration isolation found on Original Equipment foot-
FLTRXSE) and Trike models. boards. The over-molded rubber provides both comfort and
traction while riding. Kit includes right and left insert.
B. WILLIE G SKULL BRAKE PEDAL PADS – BLACK A. WILLIE G SKULL HAND GRIPS – BLACK D. WILLIE G SKULL SHIFTER PEG – BLACK E. WILLIE G SKULL RIDER FOOTBOARD INSERTS 50501286 Rider – Swept Wing Style.
Available in two sizes to fit most Harley-Davidson® motor- – BLACK, SWEPT WING STYLE Fits ’12-’16 FLD and ’86-’17 Softail®, ’86-later Touring and
cycles, these easy-to-install brake pedal pads feature rich Trike models equipped with Swept Wing rider footboards.
black rubber for grip and traction and they complement 50501287 Rider – Traditional Style.
Willie G Skull Collection Footpegs and Footboard Inserts for Fits models with traditional style rider footboards. Does not
a complete look. fit ’18-later Softail models.
50600342 Small. 50501284 Rider – Classic Style.
Fits ’15-’20 XG models (except XG750A), ’14-later XL models Fits ’18-later FL Softail models equipped with classic style
with Extended Reach Forward Control Kit P/N 50700030, rider footboards.
’93-’17 Dyna models with forward controls, and ’84-’17 FX
50501283 Rider – Contemporary Style.
Softail models (except FXSTDSE).
Fits ’18-later FL Softail models equipped with contemporary
50600344 Small. style rider footboards.
Fits ’18-later FXBR, FXBRS and FLSB models. Also fits ’18-
50501285 Passenger – Traditional Style.
later Softail models equipped with Billet Style Rear Brake
Fits models equipped with traditional-style passenger
Lever for Forward Controls P/N 41600218, 41600219 and
footboards. Does not fit ’18-later Softail models.
41600220.
50501289 Passenger – Classic Style.
50600343 Large.
Fits models with classic-style passenger footboards.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
Trike models. 50501290 Passenger – Contemporary Style.
Fits models with contemporary-style passenger footboards.
50600345 Large.
Fits ’18-later FL Softail models equipped with rider
footboards.
C. WILLIE G SKULL FOOTPEGS – BLACK A. WILLIE G SKULL HAND GRIPS – BLACK WILLIE G SKULL COLLECTION FOOT CONTROLS E. WILLIE G SKULL RIDER FOOTBOARD INSERTS E. WILLIE G SKULL RIDER FOOTBOARD INSERTS
Styled to complement Willie G Skull Accessory items, these – BLACK – BLACK, TRADITIONAL STYLE – BLACK, CLASSIC STYLE
obsidian black Footpegs feature a raised Willie G Skull and
Harley-Davidson Motorcycles script surrounded by rich black
rubber for grip and traction. Footpeg rotation is adjustable for
position, so your feet ride on the rubber treads whether used
as a rider, passenger or highway peg. Kit includes left and right
peg.
50501288 Black.
Fits models with H-D® male mount-style footpeg supports
(except the rider position on ’15-later XG, ’07-’10 XL883L, ’07-
later XL883N, XL1200N, XL1200T, XL1200V and XL1200X,
’11-later XL1200C, ’16-later XL1200CX, ’17-later XL1200CP
and XL1200CA, ’08-’13 XR and ’08-’17 FXCW, FXCWC, FXS,
FXSB, FXSBSE and FXSE and the rider and passenger
position on ’18-later Softail models).
50501281 Rider Footpegs.
Fits ’18-later FLSB, FXBB, FXBBS, FXBR, FXBRS, FXLR,
FXLRS and FXST models. Also fits ’18 later FLDE, FLHC,
FLHCS, FLSL, FLFB and FLFBS models equipped with
Footboard To Footpeg Conversion Kit P/N 50501640 and
’09-later Touring models equipped with Board-To-Peg
Conversion Kit P/N 50501642.
50501282 Passenger Footpegs.
Fits passenger position on ’20-later LiveWire® and ’18-later B. WILLIE G SKULL BRAKE PEDAL PADS – BLACK C. WILLIE G SKULL FOOTPEGS – BLACK E. WILLIE G SKULL RIDER FOOTBOARD INSERTS E. WILLIE G SKULL PASSENGER FOOTBOARD
Softail models. (50501288 SHOWN) – BLACK, CONTEMPORARY STYLE INSERTS – BLACK, TRADITIONAL STYLE
SOFTAIL TOURING
C. WILLIE G SKULL FOOTPEGS – BLACK C. WILLIE G SKULL FOOTPEGS – BLACK E. WILLIE G SKULL PASSENGER FOOTBOARD E. WILLIE G SKULL PASSENGER FOOTBOARD
(50501281 SHOWN) (50501282 SHOWN) INSERTS – BLACK, CLASSIC STYLE INSERTS – BLACK, CONTEMPORARY STYLE
490 CONTROLS CONTROLS 491
Hand & Foot Controls Collection Hand & Foot Controls Collection
WILLIE G SKULL COLLECTION – CHROME D. WILLIE G SKULL SHIFTER PEG – CHROME
The deep black rubber pads are set against a brilliant polished This easy-to-install shifter peg can be rotated to a comfortable
and chrome-plated field to yield the dramatic appearance of position and the smooth back protects the toe of your boot
CONTROLS
the Skull Collection. from wear while shifting.
34689-04
A. WILLIE G SKULL HAND GRIPS – CHROME Fits all models (except ’06-’17 VRSC™ models with forward
Contrasting the chrome sinister skull logo surrounded by controls and ’08-’13 XR).
Harley-Davidson script, the raised rubber pads add positive
grip and comfort for the long haul. Easy to install, these grips E. WILLIE G SKULL FOOTBOARD INSERTS – CHROME
feature a glueless design that allows removal without damage. Easy-to-install footboard kits retain the Original Equipment
cast-in vibration isolation for a fatigue-free ride. Kit includes
Fits ’02-’17 VRSC™, ’96-later XL ’08-’13 XR, ’91-’17 Dyna®
left and right insert.
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE
and ’11-’12 FLSTSE) and ’96-’07 Touring models. 50704-04 Rider – Swept Wing Style.
Fits ’12-’16 FLD and ’86-’17 Softail®, ’86-later Touring and
56751-04 Small 1.3" Diameter.
Trike models equipped with Swept Wing-style rider
56740-04 Medium 1.5" Diameter. A. WILLIE G SKULL HAND GRIPS – CHROME D. WILLIE G SKULL SHIFTER PEG – CHROME E. WILLIE G SKULL RIDER FOOTBOARD INSERTS, footboards.
56741-04 Large 1.6" Diameter. CHROME – SWEPT WING STYLE 50710-04 Rider – Traditional Style.
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later Fits models with traditional-style rider footboards. Does not
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 fit ’18-later Softail models.
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 50500722 Rider – Classic Style.
FLTRXSE) and Trike models. Fits ’18-later FL Softail models equipped with classic style
56740-08 Medium 1.5" Diameter. rider footboards.
50500718 Rider – Contemporary Style.
B. WILLIE G SKULL BRAKE PEDAL PADS – CHROME Fits ’18-later FL Softail models equipped with contemporary
Available in two sizes to fit most Harley-Davidson® motorcy- style rider footboards.
cles, these easy-to-install brake pedal pads complement Willie 50713-04 Passenger – Traditional Style.
G Collection pegs and footboard inserts for a complete look. Fits models equipped with traditional-style passenger
42710-04 Small. footboards.
Fits ’15-’20 XG models (except XG750A), ’14-later XL models 50501142 Passenger – Classic Style.
with Extended Reach Forward Control Kit P/N 50700030, Fits models with classic-style passenger footboards.
’93-’17 Dyna models with forward controls, and ’84-’17 FX 50501145 Passenger – Contemporary Style.
Softail models (except FXSTDSE). Fits models with contemporary-style passenger footboards.
50600313 Small.
Fits ’18-later FXBR, FXBRS and FLSB models. Also fits ’18-
later Softail models equipped with Billet Style Rear Brake
Lever for Forward Controls P/N 41600218, 41600219 and
41600220.
42711-04 Large.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and A. WILLIE G SKULL HAND GRIPS – CHROME WILLIE G SKULL COLLECTION FOOT E. WILLIE G SKULL RIDER FOOTBOARD E. WILLIE G SKULL RIDER FOOTBOARD
Trike models. CONTROLS – CHROME INSERTS, CHROME – TRADITIONAL STYLE INSERTS, CHROME – CLASSIC STYLE
50600311 Large.
Fits ’18-later FL Softail models equipped with rider
footboards.
SOFTAIL TOURING
C. WILLIE G SKULL RIDER FOOTPEGS – CHROME C. WILLIE G SKULL PASSENGER FOOTPEGS – E. WILLIE G SKULL PASSENGER FOOTBOARD E. WILLIE G SKULL PASSENGER FOOTBOARD
(50500856 SHOWN) CHROME INSERTS, CHROME – CLASSIC STYLE INSERTS, CHROME – CONTEMPORARY STYLE
(50500858 SHOWN)
492 CONTROLS CONTROLS 493
Hand & Foot Controls Collection Hand & Foot Controls Collection
KAHUNA™ COLLECTION HAND AND FOOT KAHUNA™ COLLECTION HAND AND FOOT
CONTROLS – GLOSS BLACK CONTROLS – CHROME
Understated but powerful, the Kahuna™ Collection Controls Understated but powerful, the Kahuna™ Collection Controls
CONTROLS
feature a gloss black surfaces surrounded by rich, black feature a mirror-like chrome surface surrounded by rich,
rubber that provides grip and traction where needed. These black rubber that provides grip and traction where needed.
gloss black controls are styled to complement other Kahuna These chrome controls are styled to complement other
Collection Accessories and the Hand Grips and Rider Kahuna Collection Accessories and the Hand Grips and Rider
Footboards also feature a rich red Bar & Shield logo. Footboards also feature a rich red Bar & Shield logo.
D. KAHUNA BRAKE PEDAL PAD – GLOSS BLACK B. KAHUNA FOOTPEGS – GLOSS BLACK B./C. KAHUNA FOOTPEG AND SHIFTER PEG – G. KAHUNA FOOTPEGS – CHROME G./H. KAHUNA FOOTPEG AND SHIFTER PEG – I. KAHUNA BRAKE PEDAL PAD – CHROME
50600341 Large. GLOSS BLACK CHROME 50600340 Large.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
Trike models. Trike models.
C. KAHUNA SHIFTER PEG – GLOSS BLACK D. KAHUNA BRAKE PEDAL PAD – GLOSS BLACK H. KAHUNA SHIFTER PEG – CHROME I. KAHUNA BRAKE PEDAL PAD – CHROME
SOFTAIL TOURING
D. KAHUNA RIDER FOOTBOARDS KIT – GLOSS E. KAHUNA PASSENGER FOOTBOARD KIT – J. KAHUNA RIDER FOOTBOARDS KIT – CHROME J. KAHUNA PASSENGER FOOTBOARD KIT –
BLACK GLOSS BLACK CHROME
494 CONTROLS CONTROLS 495
Hand & Foot Controls Collection Hand & Foot Controls Collection
EDGE CUT COLLECTION D. EDGE CUT FOOTBOARD INSERT KITS
Live your life on the edge. The Edge Cut Collection features Machined from billet aluminum, these footboard inserts retain
a crisp anodized finish that is machined to expose the high- the cast-in vibration isolation found on Original Equipment
CONTROLS
lights of raw aluminum. The contrasting cut back look makes footboards. The over-molded rubber provides both comfort
a powerful visual statement and works great with both tradi- and traction while riding. Kit includes right and left insert.
tional and contemporary customizing styles. 54187-10 Rider – Traditional Style.
Fits models with traditional-style rider footboards. Does not
A. EDGE CUT HAND GRIPS fit ’18-later Softail® models.
The hand grips are a comfortable 1.5" diameter and the 50500729 Rider – Classic Style.
machined slots and narrow rubber bands offer plenty of trac- Fits ’18-later FL Softail models equipped with classic style
tion, with or without gloves. Glueless design permits removal rider footboards.
for servicing without damage.
54196-10 Passenger – Traditional Style.
56100083 Fits models equipped with traditional-style passenger
Fits ’15-’20 XG models (except XG750A). footboards.
57454-10 50501143 Passenger – Classic Style.
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna® A. EDGE CUT HAND GRIPS Fits models with classic-style passenger footboards.
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE
50501146 Passenger – Contemporary Style.
and ’11-’12 FLSTSE) and ’96-’07 Touring models.
Fits models with contemporary-style passenger footboards.
57457-10
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
FLTRXSE) and Trike models.
D. EDGE CUT RIDER FOOTBOARD INSERTS – D. EDGE CUT RIDER FOOTBOARD INSERTS –
B. EDGE CUT BRAKE PEDAL PADS TRADITIONAL STYLE (SHOWN WITH CLASSIC STYLE
Available in two sizes, the brake pedal pads feature deep LARGE EDGE CUT BRAKE PEDAL PAD)
surface grooves and narrow rubber bands for traction during
application.
42847-10 Small.
Fits ’15-’20 XG models (except XG750A), ’14-later XL models
with Extended Reach Forward Control Kit P/N 50700030,
’93-’17 Dyna models with forward controls, and ’84-’17 FX
Softail models (except FXSTDSE).
50600317 Small.
Fits ’18-later FXBR, FXBRS and FLSB models. Also fits ’18-
later Softail models equipped with Billet Style Rear Brake
Lever for Forward Controls P/N 41600218, 41600219 and
41600220.
41449-10 Large. A. EDGE CUT HAND GRIPS B. EDGE CUT BRAKE PEDAL PADS
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
Trike models.
50600318 Large.
Fits ’18-later FL Softail models equipped with rider
footboards.
SOFTAIL TOURING
C. EDGE CUT FOOTPEGS & SHIFTER PEG D. EDGE CUT PASSENGER FOOTBOARD D. EDGE CUT PASSENGER FOOTBOARD
INSERTS – CLASSIC STYLE INSERTS – CONTEMPORARY STYLE
496 CONTROLS CONTROLS 497
Hand & Foot Controls Collection Hand & Foot Controls Collection
AIRFLOW COLLECTION – GLOSS BLACK AIRFLOW COLLECTION – CHROME
Defined by a sleek surround, the deep hockey-stick groove Defined by a brilliant chrome border and smooth rubber trac-
and the smooth rubber traction strips, this delta wing-inspired tion strips, this delta wing-inspired collection is the perfect
CONTROLS
collection is the perfect match for your high-profile street match for your high-profile street machine. The rich black
machine. The rich black high-grip surfaces are divided by a surfaces are divided by a deep mirror-finished groove that
deep channel that draws your eye from the leading to the trail- draws your eye from the leading to the trailing edge.
ing edge.
F. AIRFLOW HAND GRIPS – CHROME
A. AIRFLOW HAND GRIPS – GLOSS BLACK Wrap your fingers around the chrome ridge for a sweet tactile
Wrap your fingers around the gloss black ridge for a sweet feel. These grips combine a traction-grip crosshatch rubber
tactile feel. These grips combine a traction-grip crosshatch surface with a comfortable 1.6" diameter for excellent control
rubber surface with a comfortable 1.6" diameter for excel- in wet or dry weather. The easy-to-install glueless design
lent control in wet or dry weather. The easy-to-install glue- allows you to remove the grips for service without damage
less design allows you to remove the grips for service without 56100112
damage. Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’96-’17 Dyna®
56100218 A. AIRFLOW HAND GRIPS – GLOSS BLACK F. AIRFLOW HAND GRIPS – CHROME (except FXDLS), ’95-’15 Softail® (except FLSTNSE, FLSTSE
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ‘16-later and FXSBSE and ’11-’12 FLSTSE) ’96-’07 Touring models.
Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 56100108
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later
FLTRXSE) and Trike models. Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
56100356 FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’96-’17 Dyna FLTRXSE) and Trike models.
(except FXDLS), ’95-’15 Softail (except FLSTNSE, FLSTSE
and FXSBSE and ’11-’12 FLSTSE) ’96-’07 Touring models. G. AIRFLOW FOOTPEGS – CHROME
These footpegs are adjustable for position and feature a rect-
B. AIRFLOW FOOTPEGS – GLOSS BLACK angular shape and a raised rubber surface for foot support
These footpegs are adjustable for position and feature a rect- and traction whether used as a rider, passenger or highway
angular shape and a raised rubber surface for foot support peg.
and traction whether used as a rider, passenger or highway 50500435
peg. Fits models with H-D® male mount-style footpeg supports
50500717 (except the rider position on ’17-later XG750A, ’07-’10
Fits models with H-D® male mount-style footpeg supports XL883L, ’07-later XL883N, XL1200N, XL1200T, XL1200V and
(except the rider position on ’17-later XG750A, ’07-’10 XL1200X, ’11-later XL1200C, ’16-later XL1200CX, ’18-later
XL883L, ’07-later XL883N, XL1200N, XL1200V and XL1200X, XL1200NS and XL1200XS, ’08-’13 XR and ’08-’17 FXCW,
’11-later XL1200C and XL1200T, ’18-later XL1200NS and FXCWC, FXS, FXSB, FXSBSE, FXSE and the rider and
XL1200XS, ’08-’13 XR, and ’08-’17 FXCW, FXCWC, FXS, FXSB, passenger position on ’18-later Softail models).
FXSBSE and FXSE and the rider and passenger position on
’18-later Softail models). H. AIRFLOW SHIFTER PEG – CHROME
This simple-to-install Shifter Peg complements the sweep-
C. AIRFLOW SHIFTER PEG – GLOSS BLACK B. AIRFLOW FOOTPEGS – GLOSS BLACK B./C. AIRFLOW FOOTPEG & SHIFTER PEG – G. AIRFLOW FOOTPEGS – CHROME G./H. AIRFLOW FOOTPEG & SHIFTER PEG – ing design of the Airflow Collection footpegs and footboards.
This simple-to-install Shifter Peg complements the sweep- (SHOWN WITH SMALL AIRFLOW BRAKE GLOSS BLACK (SHOWN WITH SMALL AIRFLOW CHROME Rotation is adjustable for comfortable shifting, and the rubber
ing design of the Airflow Collection footpegs and footboards. PEDAL PAD) BRAKE PEDAL PAD) back protects the top of your boot while downshifting.
Rotation is adjustable for comfortable shifting, and the rubber 33600075
back protects the top of your boot while downshifting. Fits all models (except ’06-’17 VRSC™ models with forward
33600154 controls, ’17-’20 XG750A and ’08-’13 XR models).
Fits all models (except ’06-’17 VRSC models with forward
controls, ’17-’20 XG750A and ’08-’13 XR). I. AIRFLOW BRAKE PEDAL PAD – CHROME
The Airflow Brake Pedal Pad features curving chrome
D. AIRFLOW BRAKE PEDAL PAD – GLOSS BLACK surrounding a deep black rubber pad, accented with a deep
The Airflow Brake Pedal Pad features curving gloss black center groove. Easy to install, this brake pedal pad comple-
surrounding a deep black rubber pad, accented with a deep ments the Airflow Collection for a complete custom look.
center groove. Easy to install, this brake pedal pad comple- 50600165 Small.
ments the Airflow Collection for a complete custom look. Fits ’15-’20 XG models (except XG750A), ’14-later XL models
50600232 Small. with Extended Reach Forward Control Kit P/N 50700030,
Fits ’15-’20 XG models (except XG750A), ’14-later XL models ’93-’17 Dyna models with forward controls, and ’84-’17 FX
with Extended Reach Forward Control Kit P/N 50700030, Softail models (except FXSTDSE).
’93-’17 Dyna models with forward controls, and ’84-’17 FX 50600159 Large.
Softail models (except FXSTDSE). Fits ’12-’16 FLD, ’86-’17 FL Softail, ’80-later Touring and Trike
50600338 Large. models.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
Trike models. J. AIRFLOW FOOTBOARD KITS – CHROME
Comfortable and stylish, these fighter-wing shaped foot-
E. AIRFLOW FOOTBOARD KITS – GLOSS BLACK C. AIRFLOW SHIFTER PEG – GLOSS BLACK D. AIRFLOW BRAKE PEDAL PAD – GLOSS BLACK H. AIRFLOW SHIFTER PEG – CHROME I. AIRFLOW BRAKE PEDAL PAD – CHROME boards add an elegant finish to your ride. The complete kit
Comfortable and stylish, these fighter-wing shaped foot- includes chrome delta wing-shaped footboard pans with
boards add an elegant finish to your ride. The complete kit vibration-isolated inserts for a fatigue-free ride. The black
includes gloss black delta wing-shaped footboard pans with rubber pads feature a deep embossed Bar & Shield logo and
vibration-isolated inserts for a fatigue-free ride. The black rear-sweeping traction grooves.
rubber pads feature a deep embossed Bar & Shield logo and 50500436 Rider.
rear-sweeping traction grooves. Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLS, FLSS, FLSTFB,
50501265 Rider. FLSTFBS and FXSE), ’86-later Touring (except FLHTCUL and
Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLS, FLSS, FLSTFB, FLHTKL) and ’08-later Trike models.
FLSTFBS and FXSE), ’86-later Touring (except FLHTCUL and 50500437 Passenger.
FLHTKL) and ’08-later Trike models. Fits ’06-’17 Dyna, ’18-later Softail (except FXDRS, FXFB and
50501266 Passenger. FXFBS) and ’86-later Touring models equipped with
Fits ’06-’17 Dyna, ’18-later Softail (except FXDRS, FXFB and passenger footboard supports. Does not fit Trike models.
FXFBS) and ’86-later Touring models equipped with
passenger footboard supports. Does not fit Trike models.
SOFTAIL TOURING
E. AIRFLOW RIDER FOOTBOARD KIT – GLOSS E. AIRFLOW PASSENGER FOOTBOARD KIT – J. AIRFLOW RIDER FOOTBOARD KIT – CHROME J. AIRFLOW PASSENGER FOOTBOARD KIT –
BLACK (SHOWN WITH LARGE AIRFLOW GLOSS BLACK (SHOWN WITH LARGE AIRFLOW CHROME
BRAKE PEDAL PAD) BRAKE PEDAL PAD)
498 CONTROLS CONTROLS 499
Hand & Foot Controls Collection Hand & Foot Controls Collection
STREAMLINER COLLECTION – CHROME STREAMLINER COLLECTION - BLACK
Inspired by the art-deco designs of the Streamliner era, this Inspired by the curved forms and long, horizontal lines of
collection reflects the simple lines and shapes that still remain Streamline Moderne architecture, the Black Streamliner™
CONTROLS
contemporary today. The rich black rubber features three Collection takes a contemporary spin on this classic Harley-
raised chrome tri-line bands for contrast and a rich chrome Davidson style. Featuring polished chrome bands surrounded
surround to finish the look. by a sea of rich black, the Black Streamliner Collection adds a
dark and aerodynamic look to your bike.
A. STREAMLINER HAND GRIPS – CHROME
Complement the Streamliner look with these matching grips. F. STREAMLINER HAND GRIPS – BLACK
The rich black rubber provides a positive grip while riding and Complement the Streamliner look with these matching grips.
the chrome tri-line design will provide just the right touch of The rich black rubber provides a positive grip when riding and
chrome. the chrome tri-lines add just the right touch of brightness.
56100048 56100411
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ‘16-later Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ’16-later
Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 Softail® models, ’14-’15 FLSTNSE, ’11-’12 FLSTSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 F. STREAMLINER HAND GRIPS – BLACK FXSBSE and ’08-later Touring (except ’18-later FLTRXSE)
FLTRXSE) and Trike models. and Trike models.
E. STREAMLINER PASSENGER FOOTBOARD INSERT B. STREAMLINER FOOTPEGS AND SHIFTER PEG C. STREAMLINER BRAKE PEDAL PAD K. STREAMLINER PASSENGER FOOTBOARD AND
KIT – SWEPT WING SHAPE MOUNT KIT – BLACK
Styled to match the Street Glide model’s Original Equipment Designed for convenient bolt-on installation, the complete
Streamliner Rider Footboards. Featuring vibration-isola- kit includes gloss black aluminum footboards, rubber pads,
tion rubber inserts with three polished bands, this insert is mounting hardware and passenger footboard supports.
designed to fit the Swept Wing shape passenger footboard
50501819
pan. Kit includes left and right side insert.
Fits ’93-later Touring models. Does not fit Trike models.
50420-05
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and I. STREAMLINER BRAKE J. STREAMLINER RIDER L. STREAMLINER COLLECTION PASSENGER
FXFBS) and ’86-later Touring models equipped with Swept PEDAL PAD – BLACK FOOTBOARDS – BLACK
FOOTBOARD INSERT KIT – BLACK
Wing-shaped passenger footboards. Does not fit Trike Featuring vibration-isolation rubber inserts with three
models. If installed on models equipped with Passenger polished chrome bands, this insert is designed to fit the Swept
Footboard Support kit P/N 50399-07A, footboards will not Wing shaper passenger footboard pan. Kit includes left and
remain in flipped up position. right insert.
50501796
Fits ’06-’17 Dyna, ’00-later Softail (except FXFB, FXFBS and
FXDRS) and ’86-later Touring models equipped with Swept
Wing-shaped passenger footboards. Does not fit Trike
models. If installed on models equipped with Passenger
Footboard Support kit P/N 50399-07A, footboards will not
remain in flipped up position.
SOFTAIL TOURING
D. STREAMLINER RIDER FOOTBOARD KIT E. STREAMLINER PASSENGER FOOTBOARD K. STREAMLINER PASSENGER FOOTBOARDS L. STREAMLINER PASSENGER FOOTBOARD
(SHOWN WITH BRAKE PEDAL PAD AND INSERTS – SWEPT WING SHAPE AND MOUNT KIT– BLACK INSERT KIT– BLACK
FOOTPEG KIT)
500 CONTROLS CONTROLS 501
Hand & Foot Controls Collection Hand & Foot Controls Collection
A. RIDE FREE COLLECTION HAND GRIPS CHROME AND RUBBER COLLECTION
This collection celebrates our liberty to enjoy the freedom of Chrome and rubber both have their distinct places in the
the open road, and calls us all to explore, discover and unite world of motorcycle styling. It seemed natural to bring the two
CONTROLS
with our love of motorcycling. Inspired by Willie G. Davidson’s together to create this unique collection.
famous phrase, this collection continues on that tradition.
A unique way to celebrate a legend and display your pride F. CHROME AND RUBBER HAND GRIPS
in owning an American icon. The comfortable 1.5" diameter Designed to match the Chrome and Rubber Footboard Inserts
grips are easy to install and incorporate a glueless design that and Brake Pedal Pads, these grips are made from an injected
allows you to remove the grips for service without damage. rubber molding process that combines chromed steel and
56100379 durable rubber.
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’96-’17 Dyna®
Fits ’02-’17 VRSC™, ’96-later XL ’08-’13 XR, ’91-’17 Dyna®
(except FXDLS), ’95-’15 Softail® (except FLSTNSE, FLSTSE
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE
and FXSBSE and ’11-’12 FLSTSE) ’96-’07 Touring models.
and ’11-’12 FLSTSE) and ’96-’07 Touring models.
56100378
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later 56246-96A Small.
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 56263-96A Large.
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later
FLTRXSE) and Trike models. Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
B. RIDE FREE COLLECTION FOOTBOARD INSERTS FLTRXSE) and Trike models.
This collection celebrates our liberty to enjoy the freedom of
the open road, and calls us all to explore, discover and unite 56246-08 Small.
with our love of motorcycling. Inspired by Willie G. Davidson’s 56263-08 Large.
famous phrase, these footboards and footboard inserts A. RIDE FREE HAND GRIPS F. CHROME AND RUBBER HAND GRIPS
feature a stylish and practical rubber and chrome design with G. CHROME AND RUBBER CUSTOM FOOTPEGS AND
the Ride Free logo and classic Harley-Davidson branding. A SHIFTER PEG
unique way to celebrate a legend and display your pride in Fits models with H-D® male mount-style footpeg supports
owning an American icon. (except the rider position on FXCW, FXCWC, FXS, FXSB,
Rider FXSBSE and FXSE, ’15-latter XG, ’06-’17 Dyna, ’03-later
Sportster®, and ’18-later Softail models).
50501396 Traditional Style.
Fits models with traditional-style rider footboards. Does not 50500-03 Oversize.
fit ’18-later Softail models. Fits models in passenger and highway peg positions. Does not
50501398 Classic Style. fit the rider and passenger position for ’18-later Softail models.
Fits ’18-later FL Softail models equipped with classic style 50130-95A Large.
rider footboards.
50131-95A Small.
50501400 Contemporary Style.
Fits ’18-later FL Softail models equipped with contemporary- Fits all models (except ’06-’17 VRSC™ models with forward
style rider footboards. controls and ’08-’13 XR).
50501401 Swept Wing. 34608-95 Shifter Peg.
Fits ’12-’16 FLD and ’86-’17 Softail, ’86-later Touring and Trike
models equipped with Swept Wing rider footboards. H. CHROME AND RUBBER BRAKE PEDAL PADS
Passenger 42478-95 Large.
Fits ’12-’16 FLD, ’86-’17 FL Softail and ’80-later Touring and
50501397 Passenger – Traditional Style.
Trike models.
Fits models equipped with traditional-style passenger
footboards. 42476-95 Small.
Fits ’15-’20 XG models (except XG750A), ’14-later XL models
50501399 Passenger – Classic Style.
with Extended Reach Forward Control Kit P/N 50700030,
Fits models with classic-style passenger footboards.
’93-’17 Dyna models with forward controls, and ’84-’17 FX
50501402 Passenger – Contemporary Style. Softail models (except FXSTDSE).
Fits models with contemporary-style passenger footboards.
50501403 Passenger – Swept Wing. I. CHROME AND RUBBER FOOTBOARD INSERTS
Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and 50176-95 Rider – Traditional Shape.
FXFBS) and ’86-later Touring models equipped with Swept Fits ’12-’16 FLD and ’86-’17 FL Softail, and ’86-later Touring
Wing-shaped passenger footboards. Does not fit Trike and Trike models equipped with traditional-shaped rider
models. If installed on models equipped with Passenger B. RIDE FREE FOOTBOARD INSERTS – B. RIDE FREE FOOTBOARD INSERTS – G. CHROME AND RUBBER CUSTOM FOOTPEGS H. CHROME AND RUBBER BRAKE PEDAL PADS
TRADITIONAL STYLE CLASSIC STYLE AND SHIFTER PEG footboards.
Footboard Support Kit P/N 50399-07A, footboards will not
remain in flipped up position. 50177-95 Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger
footboards.
SOFTAIL TOURING
B. RIDE FREE FOOTBOARD INSERTS – B. RIDE FREE FOOTBOARD INSERTS – I. CHROME AND RUBBER RIDER FOOTBOARD I. CHROME AND RUBBER PASSENGER
CONTEMPORARY STYLE SWEPT WING INSERTS – TRADITIONAL SHAPE FOOTBOARD INSERTS – TRADITIONAL SHAPE
(SHOWN WITH BRAKE PEDAL PAD)
502 CONTROLS CONTROLS 503
Hand & Foot Controls Collection Hand & Foot Controls Collection
BRASS COLLECTION D. BRASS COLLECTION FOOTPEGS
The authentic alternative to the typical chrome-covered or Shaped for correct foot position on specific models, these
blacked-out look, the Harley-Davidson® Brass Collection heavyweight solid brass footpegs feature three raised ribs and
CONTROLS
delivers a warm, handcrafted look to your custom ride. These a mushroom end to keep your boot in place.
minimalistic living finish components make a garage-built 50500988 Footpegs – Forward Control
styling statement and are the ideal addition to your stripped- Rider/Highway.
down bobber or café motorcycle. Artistically manufactured Fits models with forward control H-D® male mount-style
from solid brass, these components feature a natural antique footpeg supports (except the rider position on ’15-later XG,
finish that will age and patina when exposed to the elements. ’07-’10 XL883L, ’07-later XL883N, XL1200N, XL1200T,
Unlike bright polished and plated brass trim, these heritage- XL1200V and XL1200X, ’11-later XL1200C, ’16-later
finished components are subtle additions to your ride and XL1200CX, ’17 XL1200CP and XL1200CA, ’18-later
don’t compete for attention with the rest of the bike. Brass XL1200NS and XL1200XS, ’08-’13 XR and ’08-’17 FXCW,
Collection components are factory treated with wax to slow FXCWC, FXS, FXSB, FXSBSE and FXSE and rider and
the aging process, and are shipped with cleaning and care passenger position on ’18-later Softail® models).
instructions.
50500482 Footpegs with Styled Wear Peg –
Forward Controls.
A. BRASS COLLECTION HAND GRIPS Fits ’11-’18 XL1200C, ’12-’16 XL1200V, ’10-later XL1200X, ’18-
These rich natural brass 1.5” diameter grips are easy to install, later XL1200XS, ’14-later XL models with Extended Reach
and feature a glueless design that allows you to remove the Forward Control Conversion Kit P/N 50700030, ’08-’11
grips for service without damage. FXCW, FXCWC and ’11-’17 FXS, FXSB, and ’16-’17 FXSE.
56100133 Hand Grips. 50500787 Footpegs – Mid Controls/Passenger.
Fits ’20-later LiveWire®, ’16-’17 Dyna® FXDLS and ‘16-later Fits models with mid-control H-D male mount-style footpeg
Softail® models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14 supports (except the rider position on ’07-’10 XL883L, ’07-
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 A. BRASS COLLECTION HAND GRIPS D. BRASS COLLECTION FOOTPEGS D. BRASS COLLECTION FOOTPEGS – FORWARD later XL883N, XL1200N, XL1200T, XL1200V and XL1200X,
FLTRXSE) and Trike models. CONTROL RIDER/HIGHWAY ’11-later XL1200C, ’16-later XL1200CX ’18-later XL1200NS
(50500988 SHOWN) and XL1200XS, and ’08-’13 XR, ’08-’17 FXCW, FXCWC, FXS,
B. BRASS COLLECTION SHIFTER PEG FXSB, FXSBSE and FXSE, and rider and passenger position
Shifter peg features a lateral ribbed design and a flared on ’18-later Softail models).
endcap to complement the Brass Collection footpegs.
50500709 Rider Footpegs.
33600093 Shifter Peg. Fits rider position on ’18-later FLSB, FXBB, FXBBS, FXLR,
Fits all models (except ’06-’17 VRSC™ models with forward FXLRS and FXST models.
controls and ’08-’13 XR models). 50500781 Passenger Footpegs.
Fits passenger position on ’20-later LiveWire® and ’18-later
C. BRASS COLLECTION BRAKE PEDAL PAD Softail models.
Cast from solid brass, this natural finish brake pedal features
three ribs stretched across the block-shaped surface.
50600169 Brake Pedal Pad – Small.
Fits ’15-’20 XG models, ’14-later XL models with Extended
Reach Forward Control Kit P/N 50700030, ’93-’17 Dyna
models with forward controls, and ’84-’17 FX Softail models
(except FXSTDSE). Also fits ’18-later FXBR, FXBRS and FLSB
models and ’18-later Softail models equipped with Billet
Style Rear Brake Lever for Forward Controls P/N 41600218,
41600219 and 41600220.
A. BRASS COLLECTION HAND GRIPS B./C. BRASS COLLECTION SHIFTER PEG AND D. BRASS COLLECTION FOOTPEGS WITH D. BRASS COLLECTION FOOTPEGS – MID
BRAKE PEDAL PAD STYLED WEAR PEG – FORWARD CONTROLS CONTROLS/PASSENGER
(50500482 SHOWN) (50500787 SHOWN)
SOFTAIL TOURING
B. BRASS COLLECTION SHIFTER PEG C. BRASS COLLECTION BRAKE PEDAL PAD D. BRASS COLLECTION FOOTPEGS – RIDER D. BRASS COLLECTION FOOTPEGS –
(50500709 SHOWN) PASSENGER
(50500781 SHOWN)
504 CONTROLS CONTROLS 505
Hand & Foot Controls Collection Hand Grips
DIAMOND BLACK COLLECTION E. SMALL DIAMETER HAND GRIPS – BLACK RUBBER
Shroud your bike in mystery. This blacked-out hand and Original Equipment on the FLHTKL, Ultra Limited Low models,
foot control collection features distinctive knurled surfaces these Small Diameter Black Rubber Grips feature smooth
CONTROLS
that expose the raw billet aluminum for a dramatic contrast. surfaces and a clean design that complements any styling
Designed to age and “break in” like a pair of comfortable direction.
stone-washed jeans, the satin black finish will complement 56100355
both high-gloss and denim paint colors. The narrow rubber Fits ’08-later Touring and ’09-later Trike models.
bands and the knurled surfaces provide a positive grip.
F. GET-A-GRIP™ HAND GRIPS
A. DIAMOND BLACK HAND GRIPS Dressed in tactified rubber for superior traction, these elegant
Hand grips are a comfortable diameter and feature glueless hand grips provide a positive connection to the controls in wet
installation that can be easily removed for service without or dry weather. The soft touch cross-hatched rubber surface
damage. feels good against both gloved and bare skin and the “thicker
56100142 in the middle” profile forms a natural fit with your closed fist.
Fits ’15-’20 XG models (except XG750A). Shaped for maximum comfort, Get-A-Grip™ hand grips are
56405-08 E. SMALL DIAMETER HAND GRIPS available in your choice of standard or magnum diameters
Fits ’02-’17 VRSC™, ’96-later XL ’08-’13 XR, ’91-’17 Dyna® to comfortably accommodate almost any size hand. And you
(except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE don’t need to sacrifice style for comfort. Designed to accent
and ’11-’12 FLSTSE) and ’96-’07 Touring models. any customizing direction, the mirror chrome or gloss black
finishes complement both traditional and contemporary looks.
56746-08
The easy-to-install glueless design allows you to remove the
Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later
grips for service without damage.
Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19 Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna®
FLTRXSE) and Trike models. A. DIAMOND BLACK HAND GRIPS (except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE
and ’11-’12 FLSTSE) and ’96-’07 Touring models.
B. DIAMOND BLACK FOOTPEGS AND SHIFTER PEG 56100007 Chrome, Standard 1.5" Diameter.
The slim footpeg design allows a comfortable pivot point and
the wide surface and large diameter end cap keep your boot 56100009 Chrome, Magnum 1.6" Diameter.
in place. 56100008 Black, Standard 1.5" Diameter.
1. 50113-10 Footpegs – Large Diameter. 56100010 Black, Magnum 1.6" Diameter.
Fits models with H-D® male mount-style footpeg supports Fits ’20-later LiveWire®, ’16-’17 Dyna FXDLS and ‘16-later
(except the rider position on ’15-later XG, ’07-’10 XL883L, ’07- Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
later XL883N, XL1200N, XL1200T, XL1200V and XL1200X, FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
’11-later XL1200C, ’16-later XL1200CX, ’17-later XL1200CP 1 FLTRXSE) and Trike models.
and XL1200CA, ’18-later XL1200NS and XL1200XS, ’08-’13
XR and ’08-’17 FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE and 56100015 Chrome, Magnum 1.6" Diameter.
the rider and passenger position on ’18-later Softail models). 56100036 Black, Magnum 1.6" Diameter.
2. 50911-08A Footpegs – Small Diameter.
Fits models with H-D male mount-style footpeg supports G. NOSTALGIC HAND GRIPS
F. GET-A-GRIP HAND GRIPS – CHROME Comfortable hourglass style with a chrome accent ring and
(except the rider position on ’17-later XG750A, ’07-’10
XL883L, ’07-later XL883N, XL1200N, XL1200T, XL1200V and 2 5 a molded-in Harley-Davidson logo. These rubber grips were
XL1200X, ’11-later XL1200C, ’16-later XL1200CX, ’17-later inspired by Harley-Davidson® motorcycles of the 1940s.
XL1200CP and XL1200CA, ’08-’13 XR and ’08-’17 FXCW, 56275-96B
FXCWC, FXS, FXSB, FXSBSE and FXSE and the rider and Fits ’02-’17 VRSC, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna
passenger position on ’18-later Softail models). (except FXDLS), ’96-’15 Softail (except FLSTNSE, FXSBSE
3. 50695-08A Footpegs with Wear Peg. and ’11-’12 FLSTSE) and ’96-’07 Touring models.
Fits ’17-’20 XG750A, ’07-’10 XL883L, ’07-later XL883N, 56275-08
XL1200N, XL1200T and XL1200CA, ’18-later XL1200NS and Fits ’20-later LiveWire, ’16-’17 Dyna FXDLS and ‘16-later
’08-’13 XR models. 3 Softail models, ’11-’12 FLSTSE, ’14-’15 FLSTNSE, ’13-’14
4. 50500035 Footpegs with Styled Wear Peg. FXSBSE, ’16-’17 FXSE and ’08-later Touring (except ’18-’19
4
Fits ’11-later XL883L and XL1200C, ’16-later XL1200CX, FLTRXSE) and Trike models.
’12-’16 XL1200V, ’10-later XL1200X, ’18-later XL1200XS, ’14-
later XL models equipped with Extended Reach Forward
Control Conversion Kit P/N 50700030, ’08-’11 FXCW and
FXCWC, ’11-’17 FXS and FXSB, and ’16-’17 FXSE models. B. DIAMOND BLACK FOOTPEGS C. DIAMOND BLACK BRAKE PEDAL PADS
5. 34690-08 Shifter Peg. AND SHIFTER PEG
Fits all models (except ’06-’17 VRSC models with forward
controls and ’08-’13 XR).
SOFTAIL TOURING
D. DIAMOND BLACK RIDER FOOTBOARD D. DIAMOND BLACK PASSENGER FOOTBOARD G. NOSTALGIC HAND GRIPS
INSERT KIT – TRADITIONAL SHAPE INSERT KIT – TRADITIONAL SHAPE
(SHOWN WITH BRAKE PEDAL PAD)
506 CONTROLS CONTROLS 507
Hand Grips – Heated Hand Grips – Heated
HEATED HAND GRIPS D. HEATED HAND GRIPS – STREAMLINER
Keep comfortable on those cool mornings or frigid night rides. Complement the Streamliner look with these matching grips.
Warm hands have a major impact on overall body comfort The rich black rubber provides a positive grip while riding and
CONTROLS
and sometimes gloves just aren’t enough. These thermostati- the chrome tri-line design will provide just the right touch of
cally controlled grips feature variable heat settings controlled chrome. These grips have been thermally mapped to provide
with a military-grade resistor and use automatic tempera- more uniform heat and are designed to achieve a maximum
ture monitoring to adjust to ambient temperatures. With both operating temperature approximately 20° Fahrenheit warmer
hands on the grips, they will remain at a constant tempera- than previous accessory heated grips for added warmth
ture regardless of changes in outside temperature. The self- during cold rides.
contained control circuit and control knob means you have
no additional switches or controller boxes to mount and the Fits ’16-’17 Dyna® FXDLS, ’16-later Softail®, and ’08-later
grips are switched on/off with the ignition to avoid draining Touring and Trike models. Does not fit CVO™ models (except
your battery. The glueless grip design allows grip removal if FXSE). ’16-’17 Softail models require separate purchase
you change handlebars or motorcycles. of Electrical Connection Kit P/N 72673-11. ’14-’16 Touring
and Trike models require separate purchase of Electrical
Connection Kit P/N 69200722. ’18-later Softail and ’17-later
A. AIRFLOW HEATED HAND GRIPS
A. AIRFLOW HEATED HAND GRIPS – CHROME D. STREAMLINER HEATED HAND GRIPS – D. STREAMLINER HEATED HAND GRIPS – BLACK Touring and Trike models require Electrical Connection Kit
Fits ’16-’17 Dyna® FXDLS, ’16-later Softail®, and ’08-later
CHROME P/N 69201599A. Does not fit ’08-’13 models with internally
Touring and Trike models. Does not fit CVO™ models (except
wired handlebars. The power wires for these grips must be
FXSE). ’16-’17 Softail models require separate purchase
wired external of the handlebar. See accessory handlebars for
of Electrical Connection Kit P/N 72673-11. ’14-’16 Touring
specific heated hand grip exclusions.
and Trike models require separate purchase of Electrical
Connection Kit P/N 69200722. ’18-later Softail and ’17-later 56100255 Chrome.
Touring and Trike models require Electrical Connection Kit P/N 56100412 Black.
69201599A. Does not fit ’08-’13 models with internally wired
handlebars. The power wires for the Chrome grips must be E. HEATED HAND GRIPS – BLACK RUBBER
wired external of the handlebar. Gloss Black grip can be wired Original Equipment on the FLHTK Ultra Limited model, these
internally. See accessory handlebars for specific heated hand Black Rubber Heated Grips feature smooth surfaces and a
grip exclusions. clean design that complements any styling direction.
56100253 Chrome. 56100034
56100342 Gloss Black. Fits ’16-’17 Dyna® FXDLS, ’16-later Softail® and ’08-later
Touring and Trike models with Original Equipment Stainless
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’96-’17 Dyna Steel handlebars. Does not fit CVO™ models or models with
(except FXDLS) and ’96-’15 Softail (except FLSTSE, FLSTNSE, chrome handlebars. ’16-later Softail® models require
and FXSBSE) and ’96-’07 Touring models. ’14-later XL, ’12-’17 separate purchase of Electrical Connection Kit P/N 72673-11.
Dyna and ’11-’15 Softail models require separate purchase of ’14-’16 Touring and Trike models require separate purchase of
Electrical Connection Kit P/N 72673-11. Does not fit ’08-’13 Electrical Connection Kit P/N 69200722. ’17-later Touring
models with internally wired handlebars. The power wires and Trike models require Electrical Connection Kit P/N
for the Chrome grips must be wired internal of the handle- 69201599. Does not fit ’08-’13 models with internally wired
bar. Gloss Black grip can be wired internally. See accessory handlebars.
handlebars for specific heated hand grip exclusions.
A. AIRFLOW HEATED HAND GRIPS – BLACK B. KAHUNA HEATED HAND GRIPS – CHROME E. HEATED HAND GRIPS – BLACK RUBBER F. CONTOURED HEATED HAND GRIPS
56100256 Chrome. F. HEATED HAND GRIPS – COLLECTIONS
56100358 Gloss Black. Styled to complement Harley-Davidson® hand and foot
control collections, these thermostatically controlled heated
B. KAHUNA™ HEATED HAND GRIPS hand grips will keep you comfortable on a cool weather ride.
Fits ’16-’17 Dyna FXDLS, ’16-later Softail, and ’08-later Touring Fits ’16-’17 Dyna FXDLS, ’16-later Softail, and ’08-later Touring
and Trike models. ’16-’17 Softail models require separate and Trike models. Does not fit CVO models (except FXSE).
purchase of Electrical Connection Kit P/N 72673-11. ’18-later ’16-’17 Softail models require separate purchase of Electrical
Softail models require separate purchase of Electrical Connection Kit P/N 72673-11. ’14-’16 Touring and Trike models
Connection Kit P/N 69201750. ’14-’16 Touring and Trike require separate purchase of Electrical Connection Kit P/N
models require separate purchase of Electrical Connection 69200722. ’18-later Softail and ’17-later Touring and Trike
Kit P/N 69200722. ’17-later Touring and Trike models require models require Electrical Connection Kit P/N 69201599A.
Electrical Connection Kit P/N 69201599A. ’08-’09 models Does not fit ’08-’13 models with internally wired handlebars.
require separate purchase of Jumper Harness P/N 70415-08A, The power wires for these grips must be wired external of the
Connector P/N 72902-01BK, and Terminal Pin P/N 72990-01 handlebar. See accessory handlebars for specific heated hand
(Qty 2). See instruction sheet for details. Does not fit ’08-’13 grip exclusions.
models with internally wired handlebars. The power wires
for these grips must be wired internal of the handlebar. See 56100257 Contoured.
accessory handlebars for specific heated hand grip exclusions. 56100362 Willie G Skull – Black.
56100318 Chrome. 56100260 Willie G Skull – Chrome.
56100331 Gloss Black. 56100267 Chrome and Rubber – Small.
Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’91-’17 Dyna
C. EMPIRE HEATED GRIPS (except FXDLS) and ’96-’15 Softail (except FLSTSE, FLSTNSE,
Fits ’16-’17 Dyna® FXDLS, ’16-later Softail®, and’08-later and FXSBSE) and ’96-’07 Touring models. ’14-later XL, ’12-’17
Touring and Trike models. Does not fit CVO™ models (except B. KAHUNA HEATED HAND GRIPS – C. EMPIRE HEATED HAND GRIPS – BLACK F. WILLIE G SKULL HEATED HAND GRIPS – F. WILLIE G SKULL HEATED HAND GRIPS –
GLOSS BLACK BLACK CHROME Dyna and ’11-’15 Softail models require separate purchase of
FXSE). ’16-’17 Softail models require separate purchase Electrical Connection Kit P/N 72673-11. Does not fit ’96-’13
of Electrical Connection Kit P/N 72673-11. ’14-’16 Touring models with internally wired handlebars or FXDB models with
and Trike models require separate purchase of Electrical Original Equipment handlebars. The power wires for these
Connection Kit P/N 69200722. ’18-later Softail and ’17-later grips must be wired external of the handlebar. See accessory
Touring and Trike models require Electrical Connection Kit P/N handlebars for specific heated hand grip exclusions.
69201599A. Does not fit ’08-’13 models with internally wired
handlebars. The power wires for these grips must be wired 56100268 Contoured.
internal of the handlebar. See accessory handlebars for 56100363 Willie G Skull – Black.
specific heated hand grip exclusions. 56100259 Willie G Skull – Chrome.
56100437 Black. 56100266 Chrome and Rubber – Small.
56100436 Chrome. 56100264 Chrome and Rubber – Large.
56100438 Machine Cut. 56100261 Nostalgic.
SOFTAIL TOURING
C. EMPIRE HEATED HAND GRIPS – CHROME C. EMPIRE HEATED HAND GRIPS – F. CHROME AND RUBBER HEATED HAND GRIPS F. NOSTALGIC HEATED HAND GRIPS
MACHINE CUT
508 CONTROLS CONTROLS 509
Footpegs 1 Footpegs
A. MINI FOOTBOARD KIT C. CUSTOM FOOTPEGS AND SHIFTER PEG
This footboard kit can be installed in place of traditional This footpeg grouping is chrome-plated and features a zinc
footpegs and provides a little additional leg support and die-cast body with steel shaft. The black rubber pads have
CONTROLS
more options to move your legs around on a long ride. Mini Harley-Davidson graphics molded in for rich detail. Allen®
Footboards mount to the standard H-D® style footpeg 2 wrench included.
supports and can be used in many rider, passenger and high- 1. 50915-90T Footpegs – Large Diameter.
way peg applications. Sole-gripping rubber complements Fits models with H-D® male mount-style footpeg supports
Original Equipment or accessory footboards and footpegs and (except the rider position on ’15-later XG, ’08-’17 FXCW,
adds vibration isolation and a rich appearance. FXCWC, FXS, FXSB, FXSBSE and FXSE, ’07-’10 XL883L, ’07-
Fits rider position: later XL883N, XL1200N, XL1200T, XL1200V and XL1200X,
’02-’17 VRSC™ models with forward controls (except ’11-later XL1200C, ’16-later XL1200CX, ’17-later XL1200CP
VRSCDX and VRSCF), ’15-’20 XG models (except XG750A), and XL1200CA, ’18-later XL1200NS and XL1200XS, ’08-’13
’06-earlier XL, ’07-’10 XL883, XL883R, XL883C, XL1200C and 3 XR and the rider and passenger position on ’18-later Softail®
XL1200R and ’07-’11 XL1200L, ’91-’17 Dyna® (except FLD) models).
and ’84-’17 Softail® models with forward controls (except 2. 50916-90T Footpegs – Small Diameter.
FXCW, FXCWC, FXS, FXSB or FXSBSE). Fits models with H-D male mount-style footpeg supports
Fits passenger position: (except the rider position on FXCW, FXCWC, FXS, FXSB,
All models with H-D® male-mount passenger peg mounts FXSBSE and FXSE, ’15-later XG, ’06-’17 Dyna®, ’03-later
(except ’06-earlier VRSC, ’03-earlier XL, ’05-earlier Dyna and Sportster®, ’07-’10 XL883L, ’07-later XL883N, XL1200N,
Softail models equipped with Shotgun exhaust). ’84-’17 XL1200T, XL1200V and XL1200X, ’11-later XL1200C, ’16-later
Softail models require separate purchase of Support Kit XL1200CX, and ’17-later XL1200CP and XL1200CA and the
P/N 50454-09. Does not fit passenger position on ’18-later rider and passenger position on ’18-later Softail models).
Softail models. 3. 34635-90T Custom Shifter Peg.
A. MINI FOOTBOARD KIT – LARGE A. MINI FOOTBOARD KIT – LARGE C. CUSTOM FOOTPEGS AND SHIFTER PEG Fits all models (except ’06-’17 VRSC™ models with forward
Fits highway peg position: CHROME GLOSS BLACK controls and ’08-’13 XR).
All models with frame-mount or engine guard-mount
highway pegs (except Whiskers Adjustable Highway Bar D. O-RING FOOTPEGS AND SHIFTER PEG
P/N 50855-09 and 50865-09).
1. 49149-84A Shifter Peg.
50500139 Small 3.0" – Chrome. Fits all models (except ’06-’17 VRSC models with
50500144 Small 3.0" – Gloss Black. forward controls, ’08-’13 XR models ’06-’17 Dyna models
50500109 Large 4.0" – Chrome. with forward controls, FXSE, or LiveWire® models).
50500124 Large 4.0" – Gloss Black. 2. 49128-82 Footpegs.
Fits models with H-D male mount-style footpeg supports
B. ENGINE GUARD MOUNT FOOTPEGS* (except the rider position on FXCW, FXCWC, FXS, FXSB,
Custom engine guard mounted footpegs let you stretch your FXSBSE and FXSE, ’15-later XG, ’06-’17 Dyna, ’03-later
legs in style. Easy-to-install chrome-plated pegs clamp firmly Sportster, ’07-’10 XL883L, ’07-later XL883N, XL1200N,
to the guard. Sold in pairs. 1 XL1200T, XL1200V and XL1200X, ’11-later XL1200C, ’16-later
XL1200CX, and ’17-later XL1200CP and XL1200CA and the
Fits highway peg position on 1.0" and 1.25" engine guards 3" Chrome rider and passenger position on ’18-later Softail models).
(except VRSC). 4" Chrome
49102-86T Harley Script. E. LARGE CUSHIONED FOOTPEG KIT
49144-86 Rubber Inserts. Large-diameter footpegs feature cushioned rubber tread for
sure-footed comfort.
49110-98
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’17-later XG750A, ’07-’10
XL883L, ’07-later XL883N, XL1200N, XL1200T, XL1200V and
2 XL1200X, ’11-later XL1200C, ’16-later XL1200CX, ’18-later
XL1200NS and XL1200XS, ’08-’13 XR and ’08-’17 FXCW,
FXCWC, FXS, FXSB, FXSBSE, FXSE and the rider and
3" Black passenger position on ’18-later Softail models).
4" Black
CONTROLS
easily on your engine guard and lets you stretch your legs and locked in a wide range of positions to accommodate both
on cross-country rides. Available in your choice of chrome the tall and short rider. The chrome-plated clamp holds its
or gloss black finishes. Works with all H-D® style male-mount place on the engine guard and the arm locks the peg securely
footpegs. in position. Kit includes chrome-plated mount, arm and instal-
lation hardware. Footpegs sold separately.
Fits front engine guards with 1.25" diameter tubing (except
VRSC™ Engine Guard P/N 49267-01A, 49388-09, XL Engine 50832-07A 3.0" Short Offset.
Guard P/N 49060-04, 49287-11, 49215-07 or Softail® Fits 1.25" engine guards. Does not fit with Chopped Engine
Nostalgic Engine Guard P/N 49037-05A). Does not fit with Guards.
Chopped Engine Guards.
D. ENGINE GUARD FOOTPEG MOUNTING KIT*
50957-02C Chrome. Allows easy installation of any H-D® male mount-style foot-
54234-10A Gloss Black. pegs on to H-D front engine guards. All pieces necessary are
D. ENGINE GUARD FOOTPEG MOUNTING KIT included in the kit, with no extra hardware to buy.
C. ADJUSTABLE HIGHWAY PEG
B. ADJUSTABLE HIGHWAY PEG MOUNTING KIT – 50964-98
MOUNTING KIT – 360°
ANGLED* Fits 1.25" engine guards (except VRSC™ Guard
Stretch out for added comfort. This Adjustable Highway P/N 49267-01A, 49388-09, XL Engine Guard P/N 49060-04
Peg Mounting Kit can be set for shorter riders and it can be or 49215-07 or Softail® Nostalgic Engine Guard P/N 49037-
reversed to reach far forward for those with long legs. The 05A). Does not fit with Chopped Engine Guards.
angled design allows the arm to reach back and around to
clear fairing lowers. The arm can be raised and lowered for
E. ENGINE GUARD FOOTPEG MOUNT CHROME
a custom fit. The mounting clamp firmly grips the engine
A. BILLET ENGINE GUARD A. BILLET ENGINE GUARD HARDWARE KIT*
guard and the locking design secures the peg at the desired
FOOTPEG MOUNTING KIT – CHROME FOOTPEG MOUNTING KIT – GLOSS BLACK Jump from zinc to chrome with this chrome-plated hard-
angle. Available in mirror chrome or gloss black finishes, the
ware kit, which replaces the standard hardware in Engine
complete kit includes matching mounting hardware. Footpegs
Guard Footpeg Mounting Kit P/N 50964-98. Made to Original
sold separately.
Equipment standards for unmatched quality, the bolts bear
Fits 1.25" engine guards. Does not fit with Chopped Engine the Harley-Davidson mark to signify they’re the genuine article.
Guards. 94140-02
50829-07A 5.0" Long Angled – Chrome. Fits Engine Guard Footpeg Mounting Kit P/N 50964-98.
50830-07A 2.5" Short Angled – Chrome.
F. BULLET TIP FOOTPEG BOLT KIT – CHROME
50500167 5.0" Long Angled – Gloss Black. Put the final touch on a custom footpeg installation with this
50500168 2.5" Short Angled – Gloss Black. chrome Bullet Tip Footpeg Bolt Kit. Sold in pairs, this acces-
sory includes chrome button head bolts, washers and uniquely
styled nuts. All hardware is developed to Original Equipment
standards to ensure product quality.
94133-01
E. ENGINE GUARD FOOTPEG MOUNT CHROME F. BULLET TIP FOOTPEG BOLT KIT – CHROME
Fits male mount-style footpegs (except ’08-’13 XR models).
HARDWARE KIT
G. FOOTPEG MOUNTING HARDWARE KIT – CHROME
Polished and chrome-plated hex head bolts replace the
Original Equipment footpeg mounting hardware for a truly
finished look. Kit includes two chrome-plated bolts and lock
nuts with nylon inserts. The bolts carry a Harley-Davidson
Bar & Shield proof mark. All hardware is developed to Original
Equipment standards to ensure product quality.
94139-01
Fits male mount-style footpegs (except FLSTSE and ’08-’13
XR models).
CONTROLS
radically change the look, select footboard pans in a new the custom look of smooth chrome. The kit includes left- and
shape or finish and add coordinating inserts that highlight right-hand traditional D-shaped footboard pans, chrome-
your custom direction. plated and ready to install with your Original Equipment hard-
ware. Just add your choice of footboard insert for the finishing
A. SWEPT WING RIDER FOOTBOARD PANS touch. Footboard supports sold separately.
Add a sleek tapered look to your footboard-equipped model. 50752-04
These Swept Wing Pans are installed using the Original Fits ’06-’17 Dyna®, ’00-later Softail® (except FXDRS, FXFB
Equipment mounts and hardware. Add your choice of Swept- and FXFBS) and ’86-later Touring and Trike models equipped
Wing Shaped footboard inserts (sold separately). with passenger footboard supports.
Fits ’12-’16 FLD and ’86-’17 FL Softail® (except FLS, FLSS,
G. SWEPT WING PASSENGER FOOTBOARD PANS
FLSTFB and FLSTFBS), Touring (except FLHTCUL, FLHTKL
These unique Swept Wing Passenger Footboard Pans comple-
and FLHTCUL TC) and Trike models.
A. SWEPT WING RIDER FOOTBOARD B. BLACK RIDER FOOTBOARD PANS – F. PASSENGER FOOTBOARD PANS – CHROME G. SWEPT WING PASSENGER FOOTBOARD PANS ment the Swept Wing Rider Footboard shape and allow you
50683-04 Chrome Right. to replace the Original Equipment passenger footpegs on
PANS (CHROME SHOWN) TRADITIONAL STYLE (GROOVED SHOWN)
50688-04 Chrome Left. certain models with footboards. When folded, the footboard
51060-08 Black. displays a mirror chrome surface in your choice of smooth or
ball-milled grooved design. Footboard inserts and footboard
B. BLACK RIDER FOOTBOARD PANS supports sold separately.
Complete the blacked-out transformation. Replace the Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
Original Equipment chrome footboard pans with sinister FXFBS) and ’86-later Touring models equipped with passen-
gloss black. Kit includes both the right and left pan and is ger footboard supports. Does not fit Trike models.
installed using the Original Equipment hardware and insert
pad. Custom footboard inserts are sold separately. 50357-04 Chrome – Grooved.
51322-08 Traditional Shape. 50716-04 Chrome – Smooth.
Fits ’12-’16 FLD and ’86-’17 FL Softail (except FLS, FLSS,
FLSTFB and FLSTFBS), Touring (except FLHTCUL, FLHTKL H. HALF-MOON PASSENGER FOOTBOARD
and FLHTCUL TC) and Trike models. PANS AND INSERTS
Styled to match the Half-Moon Rider Footboards, these clas-
C. HALF-MOON RIDER FOOTBOARDS sic passenger footboards add both style and comfort to your
Combine the style of the ’40s with the comfort of today. The nostalgic ride. Available in mirror chrome or gloss black finish,
classic half moon-shaped rider footboards are available the kit includes left and right footboard pan and vibration-
in polished stainless steel or gloss black finish to comple- isolation footboard inserts. Model-specific footboard mounts
ment your styling direction. The traditional "Harley-Davidson" are sold separately.
rubber insert features a vibration-isolation design for a long, Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and
comfortable ride. Kit includes left and right footboard pans FXFBS) and ’86-later Touring models equipped with passen-
and matching rubber inserts. ger footboard supports. Does not fit Trike models.
C. HALF-MOON RIDER FOOTBOARDS – C. HALF-MOON RIDER FOOTBOARDS – GLOSS H. HALF-MOON PASSENGER FOOTBOARD H. HALF-MOON PASSENGER FOOTBOARD
Fits ’86-’17 FL Softail models. POLISHED STAINLESS STEEL BLACK PANS – CHROME PANS – GLOSS BLACK 50807-08 Chrome.
51345-08 Polished Stainless Steel. 50810-08 Gloss Black.
51400-08 Gloss Black.
I. CONCHO PASSENGER FOOTBOARD COVERS
D. PASSENGER FOOTBOARD PANS – CHROME Heritage Softail® Classic-inspired conchos make these covers
Replace the factory black painted passenger footboard with look great whether footboards are up or down.
the custom look of smooth chrome. These chrome-plated 50193-96
Footboard Pans are ready to install using your Original Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
Equipment hardware and the kit includes left- and right-side Trike models equipped with traditional D-shaped aluminum
Footboard Pans. Just add your choice of Footboard Insert for passenger footboards.
the finishing touch. Footboard Supports sold separately.
J. V-LOGO PASSENGER FOOTBOARD COVERS
Fits ’06-’17 Dyna®, ’18-later Softail (except FXDRS, FXFB and V-Logos are die-cast aluminum integrated with the cover,
FXFBS) and ’86-later Touring models equipped with passen- then chrome-plated for a desirable shine. Includes all
ger footboard supports. Does not fit Trike models. mounting hardware.
50501144 Classic Style. 50194-96
50501147 Contemporary Style. Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
Trike models equipped with traditional D-shaped aluminum
E. PASSENGER FOOTBOARD PANS – BLACK passenger footboards.
Complete the blacked-out transformation. Replace your
chrome Passenger Footboard Pans with sinister black. Kit K. ROAD KING® CLASSIC PASSENGER
includes left- and right-side Footboard Pans and is installed FOOTBOARD COVERS
using the Original Equipment hardware. Custom Footboard The latest in the family of Road King® Classic inspired acces-
D. PASSENGER FOOTBOARD PANS – CHROME, D. PASSENGER FOOTBOARD PANS – CHROME, I. CONCHO PASSENGER J. V-LOGO PASSENGER
Inserts and Footboard Supports sold separately. sories, this chrome-plated steel footboard cover features
CLASSIC STYLE CONTEMPORARY STYLE FOOTBOARD COVERS FOOTBOARD COVERS
a chrome die-cast Road King Classic medallion with black
Fits ’06-’17 Dyna, ’18-later Softail (except FXDRS, FXFB and accents and a stylish leather accent piece. Mounting hard-
FXFBS) and ’86- later Touring models equipped with passen- ware included.
ger footboard supports. Does not fit Trike models.
50246-00
50501610 Classic Style. Fits ’06-’17 Dyna, ’86-’17 FL Softail and ’87-later Touring and
50501611 Contemporary Style. Trike models equipped with traditional D-shaped aluminum
passenger footboards.
SOFTAIL TOURING
E. PASSENGER FOOTBOARD PANS – BLACK, E. PASSENGER FOOTBOARD PANS – BLACK, K. ROAD KING CLASSIC PASSENGER L. HARLEY-DAVIDSON SCRIPT PASSENGER
CLASSIC STYLE CONTEMPORARY STYLE FOOTBOARD COVERS FOOTBOARD COVERS
514 CONTROLS CONTROLS 515
Mirrors Mirrors
A. TAPERED FAIRING MOUNT MIRRORS* E. ROUND BAR END MIRROR – SATIN BLACK*
Reflect your personal style. These slim forged aluminum Complete the cut-down café bike look. These Bar End Mirrors
Fairing Mount Mirrors minimize the profile at the edges provide a clean, streamlined look when compared to tradi-
CONTROLS
of the Batwing Fairing for a clean custom look. The single- tional mirrors. These round convex mirrors plug into the
stalk mount permits a wide range of adjustability and the end of the handlebar to extend beyond the hand grip for an
convex mirror face maximizes the field of view. The mirrors improved field of view on the bike equipped with narrow bars.
are designed as a direct replacement for the Street Glide® When equipped with the Bar End Mirror Hand Grips (sold
model’s Original Equipment mirrors, and can be installed on separately), the mirrors are simply inserted into the end of
other Batwing fairing-equipped models in place of handlebar- the grip and tightened in place. The mirrors are adjustable for
mounted mirrors. Tapered Fairing Mirrors are available in your maximum rear visibility, and can be positioned above the bar
choice of polished chrome or gloss black Edge Cut finish to or, in some configurations, below the bar. When positioned
match your styling direction. below the bar, the left-hand mirror is used on the right, and
the right-hand mirror moves to the left side. Includes hardware
Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and required to fit both 7/8" or 1" bars. Right and left mirrors are
Tri Glide® models. sold separately.
56000098A Chrome.
A. TAPERED FAIRING MOUNT MIRRORS – CHROME Fits stock or accessory handlebars on ’15-’20 XG (except
56000099A Edge Cut.
models equipped with Drag Bar P/N 55800225 or 55800238),
’96-later VRSC™ (except VRSCF), XL, XR, Dyna® (except
B. FAIRING MOUNT MIRRORS – BLACK* FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE and
Fairing Mount Mirrors offer a truly innovative look from the ’11-’12 FLSTSE) and ’96-’07 Touring models. Installation
traditional handlebar-mounted mirrors. Mounting just inside requires separate purchase of Diamond-Black Hand Grip P/N
the inner fairing, the molded plastic mirror housings comple- 56100199 (1") or 56100202 (7/8").
ment the contours of the batwing fairing. They provide a wide
range of adjustability and feature convex mirror glass that 56000133A Right Hand (upright position).
maximizes your field of view. The Bar & Shield logo is care- E. ROUND BAR END MIRROR – SATIN BLACK 56000134 Left Hand (upright position).
fully laser-etched on each mirror glass. Kit includes neces-
sary hardware, instructions and mounting template for easy F. DIAMOND-BLACK HAND GRIPS – BAR END MIRRORS*
installation. Shroud your bike in mystery. This blacked-out hand and
56000076 foot control collection features distinctive knurled surfaces
Fits ’14-later Electra Glide, Ultra Limited and Tri Glide models that expose the raw billet aluminum for a dramatic contrast.
(except FLHTCUTG). Original Equipment on Street Glide Designed to age and break in like a pair of comfortable stone-
models. washed jeans, the satin black finish will complement both
high-gloss and denim paint colors. Designed for use with Bar
91945-98B
End Mirrors, these stripped-down Hand Grips feature glue-
Fits ’96-’13 Electra Glide and Trike models. Original
less installation that can be easily removed for service without
equipment on Street Glide models.
damage. Grip End Caps are sold separately.
C. FAIRING MOUNT MIRRORS – CHROME* 56100199 For 1" Diameter Bar.
Add a splash of chrome to the batwing inner fairing. These Fits ’96-later VRSC, XL, XR, Dyna (except FXDLS), ’96-’15
Fairing Mount Mirrors de-clutter the handlebar and add a Softail (except FLSTNSE, FXSBSE and ’11-’12 FLSTSE) and
contemporary aero style to your ride. The attractive chrome A. TAPERED FAIRING MOUNT MIRRORS – EDGE CUT ’96-’07 Touring models. Installation requires separate
housing provides a custom look and the convex mirror and purchase of Bar End Mirrors P/N 56000133 and 56000134
wide range of adjustment maximizes your field of view. A direct or End Caps P/N 55900114.
bolt-on replacement for Original Equipment fairing mount 56100202 For 7/8" Diameter Bar.
mirrors, the kit includes the hardware and mounting template Fits ’15-’20 XG models. Installation requires separate
required for easy and accurate installation. purchase of Bar End Mirrors P/N 56000133 and 56000134
56000077 or End Caps P/N 55900114.
Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri
Glide models (except FLHTCUTG). G. MIRRORS WITH AUXILIARY RUNNING LIGHT AND
DIRECTIONAL INDICATOR*
56000029
Function and style in one package. This forged mirror
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
combines a traditional swept shape with a contemporary
Original Equipment on ’12 FLHXSE models.
addition – forward-facing auxiliary lighting. Smoked lenses
hide bands of amber LED lamps that glow as running lamps
D. ILLUMINATED FAIRING MOUNT MIRROR when the ignition is on and add a fast-acting auxiliary direc-
COVERS – CHROME tional indicator when the turn signals are activated. The
Add auxiliary LED turn signals and a splash of chrome to the forward-facing eye-level lamps command additional atten-
inner fairing. The perfect finishing touch to a fully dressed E. ROUND BAR END MIRROR – SATIN BLACK F. DIAMOND-BLACK HAND GRIPS – BAR END
MIRRORS (56100199 SHOWN) tion from oncoming traffic. Both mirrors flash when the emer-
inner fairing, these chrome-plated mirror housings feature gency hazard lights are activated. The wiring is concealed in
fast-acting amber LED turn signals at the outer edge. Side the housing and stem and is easily connected to the Original
turn signals attract attention from the drivers around you and Equipment wiring harness. Available in mirror chrome or satin
the plug-in, no-splice design simplifies installation. black finish.
56000084
Fits ’14-later Touring and Trike models with fairing-mount Fits ’14-later Touring (except Road King® and Road Glide®) and
mirrors. Does not fit with Split Vision Fairing Mount Mirrors Tri Glide® models.
B. FAIRING MOUNT MIRRORS – BLACK C. FAIRING MOUNT MIRRORS – CHROME
P/N 92085-10 or Tapered Fairing Mount Mirrors 56000080 Chrome.
P/N 56000098A or 56000099A. 56000081 Satin Black.
Fits ’97-later models (except VRSCF, XG, XL1200X, XL1200XS,
FXDLS, FLSS, FLSTFBS, FXCWC, ’18-later Softail, and ’14-later
Touring). Also fits ’14-later Road King® and ’15-later FLRT
models.
92059-07A Chrome.
92068-08A Satin Black.
CONTROLS
and Revolution® Max models). Street Glide® models require and ’18-later FLTRXSE). Does not fit XL1200X with mirrors
separate purchase of Fairing Plug Kit P/N 57300063. Does not 1 1 mounted below the handlebar and RA1250, RA1250S and
fit XL1200X with mirrors mounted below the handlebar. RH1250S models.
91931-92T Short Stem, Left Side.
1. EMPIRE COLLECTION MIRRORS* 91930-92T Short Stem, Right Side.
56000305 Machine Cut.
56000301 Chrome. E. LIVE TO RIDE LOGO COLLECTION MIRRORS*
56000294 Black. Fits ’82-later models (except VRSCF, XG750A, ’14-’16 FLHR,
FLHRC and FLHRSE, ’11-’13 FLHTCUSE, ’14-later FLHTKSE
2. DOMINION™ COLLECTION MIRRORS* and ’18-later FLTRXSE). Does not fit XL1200X with mirrors
56000136 Gloss Black. mounted below the handlebar and RA1250, RA1250S and
RH1250S models.
56000137 Bronze.
1 2 2 D. ONE-PIECE ROUND MIRRORS E. LIVE TO RIDE LOGO COLLECTION 1. One-Piece Short Stem Mirrors
3. RIZOMA COLLECTION MIRRORS* MIRRORS – GOLD 91866-90T Gold, Left.
56000263 Black. $282.95 91864-90T Gold, Right.
CONTROLS
finish designed to match accessory chrome hand controls chrome, without compromising quality. This kit is manufac-
or complement Original Equipment-style black components. tured from Original Equipment components and includes a
Clutch anti-rattle clip and new pivot bushing included. Chrome Master Cylinder Cover. When combined with Chrome
Switch Housing Kit, Chrome Switch Caps and other Harley-
Fits ’14-later XL models. Davidson® Genuine Motor Accessories, this front brake
control kit provides a look that does more than stop your bike –
36700053A Chrome. it can stop traffic.
36700052 Black. 45284-99E
Fits ’96-’03 XL, ’96-’17 Dyna® (except ’16-’17 FXDLS), ’96-’14 Fits ’96-’03 XL, ’96-’05 Dyna® and Softail® models with
Softail® and ’96-’07 Touring models. Does not fit Police or single disc front brakes and cable-operated clutch.
models equipped with hydraulic clutch. 45281-99E
Fits ’96-’03 XL models, ’96-’05 Dyna and Softail and ’96-’04
45075-07 Chrome. Touring models with dual disc front brakes and cable
A. CHROME HAND CONTROL LEVERS B. CHROME CLUTCH BRACKET AND B. CHROME CLUTCH BRACKET AND MASTER
44994-07 Black. MASTER CYLINDER KIT – (45355-08 SHOWN) CYLINDER KIT – (42117-08A SHOWN) operated clutch.
55798-10A Edge Cut. 45355-08A
Fits ’08-’17 Dyna (except FXDF, FXDLS and ’14-’17 FXDL) and
Fits ’04-’13 XL and XR models. ’08-’14 Softail models equipped with single disc front brakes
46944-07A Black. a nd cable-operated clutch.
41700480
Fits ’06-’17 VRSC™ models.
Fits ’18-later Softail (except FXLRS, FXLRST, FXDRS, FXFB
42275-07A Black. and FXFBS) models.
Fits ’15-’17 Softail models (except FLSS, FLSTFBS and FXSE). 36700100
Fits ’15-’17 Softail models with cable-operated clutch.
36700104 Chrome. 45355-06B
36700105 Black. Fits ’06-’07 Dyna and Softail models equipped with single
disc front brakes and cable-operated clutch.
Fits ’18-later Softail models. Will slightly extend the brake lever
reach of FXFB, FXFBS, FXDRS and FXLRST models. 41701018
Fits ’21-later Touring and Trike models (except Road Glide®
36700209 Chrome. models) with cable-operated clutch.
36700210 Black. 41700440
36700211 Edge Cut. Fits ’17-’20 Touring (except Road Glide® models) and ’19-’20
Trike models.
Fits ’21-later Touring models. 41700263D
36700272 Chrome. Fit ’14-’16 Touring models (except Road Glide) with hydraulic
36700271 Black. clutch. Does not fit Trike models.
A. BLACK HAND CONTROL LEVERS B. CHROME CLUTCH AND BRAKE MASTER B. CHROME CLUTCH AND BRAKE MASTER 42117-08A
36700273 Edge Cut. CYLINDER KIT – (41700480 SHOWN) CYLINDER KIT – (41700263D SHOWN) Fits ’08-’16 Touring models with cable-operated clutch.
36700274 Slotted Chrome.
46418-05B
Fits ’17-’20 Touring and ’19-’20 Trike models. Fits ’05-’07 Touring models with cable-operated clutch.
41700422A Chrome. 41700441A
Fits ’17-’18 Trike models.
41700421A Black.
41700330A
41700424A Edge Cut. Fits ’14-’16 Trike models with hydraulic clutch.
41700425A Slotted Chrome. 41700463
Fits ’17-’20 Road Glide® models.
Fits ’14-’16 Touring models equipped with hydraulic clutch.
Does not fit Trike models. 41701019
Fits ’21-later Road Glide® models with cable-operated clutch.
36700065 Chrome.
36700064 Black.
36700067 Edge Cut.
Fits ’14-’16 FLHR and FLHRC and ’08-’13 Touring and Trike
models. Does not fit models equipped with hydraulic clutch.
38843-08 Chrome.
38845-08 Black.
36700004 Edge Cut.
Fits ’17-’18 Trike models. A. EDGE CUT HAND CONTROL LEVERS B. CHROME CLUTCH AND BRAKE MASTER B. CHROME CLUTCH AND BRAKE MASTER
CYLINDER KIT – (4701018 SHOWN) CYLINDER KIT – (4701019 SHOWN)
41700423A Chrome.
SOFTAIL TOURING
A. SLOTTED HAND CONTROL LEVER KIT B. CHROME CLUTCH AND BRAKE MASTER B. CHROME CLUTCH AND BRAKE MASTER
CYLINDER KIT – (41700440 SHOWN) CYLINDER KIT – (41700463 SHOWN)
520 CONTROLS CONTROLS 521
Hand Controls Hand Controls
A. SWITCH HOUSING KIT – CHROME C. TURN SIGNAL EXTENSION CAPS
Convert your handlebar switch housings from black to brilliant Make signaling simple. These Turn Signal Extension Caps
chrome. Complete kit includes left and right housings sets. No allow riders to easily reach and activate turn signals without
CONTROLS
switches or wiring required. repositioning or removing their hands from the grips. The
70222-96B one-piece design features a contoured thumb extension that
Fits ’02-’17 VRSC™, ’96-’13 XL, ’08-’12 XR, ’96-’11 Dyna®, and places the left- and right-hand signal control in a comfortable
Softail® (except FXSTDSE) and ’96-’13 Road King® (except position. Available in chrome and black, these Extension Caps
FLHRSE) models. replace the stock turn signal switch caps without re-wiring.
71826-11 Fits ’14-later XL, ’12-’17 Dyna® and ’11-later Softail® models
Fits ’14-later XL, ’12-’17 Dyna® and ’11-later Softail® models (except FLDE, FLHC, FLHCS, FLSB, FLSTSE, FXLRST and
not equipped with Cruise Control. FXSBSE).
71500442 71500177 Black.
Fits ’16-later Softail models equipped with cruise control.
71500178 Chrome.
71500185
Fits ’14-later Touring (except FLHRXS) and Trike models. Fits ’02-’17 VRSC™, ’96-’13 XL, ’08-’12 XR, ’96-’11 Dyna,
70228-96C A. SWITCH HOUSING KIT – CHROME (71500185 SHOWN) C. TURN SIGNAL EXTENSION CAPS – BLACK C. TURN SIGNAL EXTENSION CAPS – CHROME ’96-’10 Softail and ’96-’13 Touring and Trike models.
Fits ’96-’13 FLHTCU, FLHTK, FLTR and FLTRU, ’02-’13 FLHRC (71500179 SHOWN) (71500180 SHOWN) 71500179 Black.
and ’09-’13 FLHTCUTG models. Also fits ’02-’13 FLHR
Fits ’20-later FLHT, ’14-later Road King® and Freewheeler®
models equipped with cruise control.
models. Does not fit CVO™ models or Lighted Hand Control
71813-09 Switches P/N 71500561.
Fits ’96-’13 FLHT, FLHTC, FLHX and FLTRX and ’10-’11 Reverse cap for
FLHXXX models equipped with cruise control. Tri Glide models 71500285 Black.
Fits ’16-later Electra Glide® (except FLHT), Street Glide®,
B. HANDLEBAR RESERVOIR COVER SET Ultra Limited™, Road Glide® and FLHTCUTG models. Does
This kit includes a chrome-plated clutch bracket, handle- not fit CVO™ models or Lighted Hand Control Switches P/N
bar control clamps, master cylinder cover and hardware to 71500561.
completely finish chroming the hand controls. Combine with
71500286 Black.
chrome-plated Switch Housing Kit P/N 70222-96B to finish
the look. Cannot be used with Auxiliary Lighting Kits.
D. SWITCH CAP KIT – CHROME
46099-98 Not satisfied until everything you see is chrome? These
Fits ’96-’03 XL, ’96-’17 Dyna, ’96-’14 Softail and ’96-’07 Chrome Switch Cap Kits will add style to one of the most visi-
Touring models with dual disc front brakes. (Does not fit ble areas of your bike, the switches. Shaped for the same ergo-
VRSC models or models equipped with hydraulic clutch.) nomic feel as the Original Equipment hand control switches,
46098-98 these caps replace the stock black caps without re-wiring. The
Fits ’96-’03 XL, ’96-’17 Dyna and ’96-’14 Softail models with chrome switch caps complement other chrome hand control
single disc front brakes. (Does not fit models equipped with accessories (Chrome Master Cylinder Kit, Chrome Hand
hydraulic clutch.) Levers, Chrome Switch Housings and Chrome Master Cylinder
Cover) to complete the custom look.
A. SWITCH HOUSING KIT – CHROME (71500442 SHOWN) D. SWITCH CAP KIT – CHROME (71500187C SHOWN)
71500187C
Fits ’20-later FLTRK, ’19-later FLHTK and FLHTKL, ’16-later
FLHTCU, FLHTCUL, FLHX, FLHXS, FLHXST, FLTRU, FLTRX,
FLTRXS, FLTRXST and ’09-’18 FLHTCUTG models. Does not
fit CVO models.
Reverse cap for 71500186A
Freewheeler models Fits ’16-later Road King, ’20-later FLHT, and ’15-’18
Freewheeler models. Does not fit CVO models.
71500228C
Fits ’16-’18 FLHTK and FLHTKL models. Does not fit CVO
models.
71500515
Fits ’19-later FLHTCUTG models. Does not fit CVO models or
Lighted Hand Control Switches P/N 71500561.
71500517
Fits 19-later FLRT models. Does not fit with Lighted Hand
Control Switches P/N 71500561.
71500441
Fits ’14-later XL, ’12-’17 Dyna® and ’11-later Softail® models
(except FLDE). Kit includes switch cap for cruise-control
equipped models for ’16-later models. Does not fit models
with Auxiliary Lamps.
A. SWITCH HOUSING KIT – CHROME A. SWITCH HOUSING KIT – CHROME D. SWITCH CAP KIT – CHROME D. SWITCH CAP KIT – CHROME 71804-03
(70222-96B SHOWN) (70223-96B SHOWN) (71500515 SHOWN) (71500186A SHOWN) Fits ’02-’17 VRSC and ’96-’13 XL and XR, ’96-’11 Dyna, ’96-’13
FLHR and ’98-’01 FLHRC models. FLHR models equipped
with cruise control use Kit P/N 71808-03.
71500110
Fits ’14-later XL, ’12-’17 Dyna (except ’16-’17 FXDLS), and ’11-
’15 Softail models.
71802-03
Fits ’96-’13 FLHTCU, FLHTK, FLTR and FLTRU and ’09-’13
FLHTCUTG models.
71816-09
Fits ’96-’13 FLHT, FLHTC, FLHX and FLTRX and ’10-’11
FLHXXX models equipped with cruise control.
SOFTAIL TOURING
B. HANDLEBAR RESERVOIR COVER SET D. SWITCH CAP KIT – CHROME D. SWITCH CAP KIT – CHROME
(71500228C SHOWN) (71500441 SHOWN)
522 CONTROLS CONTROLS 523
Hand Controls Hand Controls
A. FRONT MASTER CYLINDER COVER — CHROME C. REAR MASTER CYLINDER COVER – CHROME
Includes chrome-plated cover, gasket and decal. Easily An easy way to add chrome to your bike is with this chrome-
installed with included stainless steel screws. plated version of the stock master cylinder cover.
CONTROLS
45078-96D Brake. 46425-05A 46463-08
Fits ’02-’05 VRSC™, ’96-’03 XL, ’96-’05 Dyna® and Softail® Fits ’08-later Touring models. Does not fit Trike models.
and ’96-’04 Touring models. 46425-05A
46424-05B Brake. Fits ’06-’17 Dyna® non-ABS models, ’06-’17 Softail® and ’05-
Fits ’06-’17 Dyna, ’06-’14 Softail and ’05-’07 Touring models. ’07 Touring models.
Also fits ’14-later Trike brake master cylinder and ’14-’16 Trike 45149-99C
clutch master cylinders. Fit ’00-’05 Softail and ’99-’04 Touring models.
42123-08 Brake.
45149-99C
Fits ’08-later Touring and ’09-’13 and ’19-later Trike models. D. BANJO BOLT KIT – CHROME
36700094A Clutch. Replace the Original Equipment zinc finish brake line hardware
Fits ’14-’16 Touring models equipped with hydraulic clutch. with brilliant chrome custom banjo bolts.
Does not fit Trike models. 41843-08
41700297 Brake. C. REAR MASTER CYLINDER COVER – CHROME C. REAR MASTER CYLINDER COVER – CHROME Fits ’06-’17 VRSC™, ’08-later Touring and ’09-’13 Trike
Fits ’15-’17 Softail models. (46463-08 SHOWN) models.
41700442 Clutch.
Fits ’17-’20 Touring and ’19-’20 Trike models. E. SWITCH HOUSING HARDWARE KIT
Complete the chrome conversion with this Chrome Hardware
B. EDGE CUT MASTER CYLINDER COVER Kit. Chrome-plated stainless steel hardware replaces the
The Edge Cut master cylinder cover features a crisp anodized Original Equipment black hardware on the hand control switch
finish that is machined to expose the highlights or raw alumi- housing, clutch and brake bracket clamps.
A. CHROME MASTER CYLINDER COVER A. CHROME MASTER CYLINDER COVER
num. The contrasting cut back look makes a powerful visual 45078-96D 46424-05B 91124-03A
statement, and works great with both traditional and contem- Fits ’96-later models (except 15-later XG, ’04-later XL and XR
porary customizing styles. This cover is a direct replace- and ’15-later Softail, Touring and Trike).
ment for the Original Equipment master cylinder cover. Easily
installed kit includes cover, gasket and black hardware. F. REDUCED EFFORT CLUTCH KIT
41700334 Brake. Kit includes a new clutch spring and inner/outer ramps that
Fits ’06-’17 VRSC, ’08-later Touring and ’09-’13 Trike models. significantly reduce clutch lever effort. Original Equipment on
’06-later Twin Cam-equipped models.
36700119 Clutch.
Fits ’06-’17 VRSC, and ’14-’16 Touring models equipped with 36808-05
hydraulic clutch. Fits ’99-’05 Twin Cam-equipped models. Stock on ’06-later
Twin Cam-equipped models. This kit is not for use with
Screamin’ Eagle® Performance Parts.
SOFTAIL TOURING
B. EDGE CUT MASTER CYLINDER COVER B. EDGE CUT MASTER CYLINDER COVER G. THROTTLE CABLE CLIP – CHROME
41700334 36700119
524 CONTROLS CONTROLS 525
Hand Controls Hand Controls
A. LIGHTED HAND CONTROL SWITCHES D. CRUISE CONTROL KIT
Add function and style to the Original Equipment hand controls. For long-distance runs, there’s nothing better than letting
Lighted Hand Controls feature soft white LED backlighting your bike do all the work. This Cruise Control Kit puts you just
CONTROLS
that illuminates the switch function icons for enhanced night- minutes away from true touring bliss. Unlike mechanical throt-
time visibility. You get at-a-glance identification and a modern tle controls or friction thumb wheels, this complete electronic
up-to-date look. Kit includes plug-in switch packs for left- and speed control allows you to set and maintain constant speed
right-hand controls, now including the Traction Control switch at the touch of a button. Your dealer will install the new hand
for ’20-later models. controls, enable the cruise control function in the Electronic
71500629 $272.95 Control Module (ECM) and you’re ready to roll. No splicing into
Fits ’21-later Touring models with Traction Control and ’21- the wiring harness to install. Kit includes updated switch hous-
later FLHTCUTG. Does not fit Road King® or FLHT models. ings and all necessary hardware.
Does not fit with Chrome Switch Cap Kits. 41000369
71500561 Fits ’16-later Softail® models. Original Equipment on ’16-’17
Fits ’20 Touring models with Traction Control and ’19-’20 FLSS, FLSTC, FLSTFBS, FLSTN and FXSE models and ’18-
FLHTCUTG. Does not fit with Chrome Switch Cap Kits. later FLHC, FLHCS and FLSB models. Dealer Digital
Technician™ software update is required.
71500248C A. LIGHTED HAND CONTROL SWITCHES D. CRUISE CONTROL KIT (41000369 SHOWN)
Fits ’14-’20 Touring models (without Traction Control) with a
Boom!™ Box audio system (for RDRS see P/N 71500561) E. HANDLEBAR SWITCH CONTROL KIT
and ’14-’18 FLHTCUTG models. Stock on ’14-’19 CVO™ Updated for use with ’07-later models equipped with clutch
Touring models. interlock system. This exclusive Harley-Davidson® kit simpli-
fies the switch to custom style handlebars. Kit features the
71500250B Original Equipment left and right switch housings, 60.0" wiring
Fits ’14-’16 FLHR and FLHRC models. harness and all necessary hardware.
B. CLUTCH FERRULE AND BANJO BOLT COVER KITS 70239-07
These chrome-plated die-cast covers provide a custom look Fits ’96-’13 XL, ’08-’13 XR, ’96-’11 Dyna® and ’96-’10 Softail
to your hand controls. The pair of tapered covers conceals the models (except ’07-’10 FLSTF). Also fits ’96-’13 Touring
brake banjo bolt cable and the clutch cable or hydraulic line models without cruise control or radio controls.
connections as they enter the hand controls. The two-piece
design is easy to install and adds a finishing touch to Original F. AUXILIARY ACCESSORY SWITCH HOUSING KIT
Equipment or braided lines and cables. Kits are available for Keep your eyes on the road and your hands on the grips with
models with cable- or hydraulic-operated clutch. these easy-to-reach Auxiliary Accessory Switch Housings.
Available for left and right hand control clusters, these hous-
41300061 Brake and Cable Clutch. ings will allow you to install up to six switches (when two hous-
Fits ’84-later models (except VRSC™, ’15-later XG, and ’08- ings are used) to control various electrical devices. Available in
later XR). Will not fit models equipped with hydraulic clutch. black to match Original Equipment switch housings or a bright
Some models may require rotation of the front master chrome finish to complement accessory Chrome Switch
cylinder banjo fitting. See the service manual for Brake Housing Kits. All necessary mounting hardware is included.
systems procedures. Switches sold separately.
41300062 Brake and Hydraulic Clutch.
Fits ’09-’17 VRSC™, ’14-’20 Touring (except Road Glide®), ’14- Fits ’96-later VRSC™, XL, XR, Dyna, Softail (except FLSB,
A. LIGHTED HAND CONTROL SWITCHES – A. LIGHTED HAND CONTROL SWITCHES – E. HANDLEBAR SWITCH CONTROL KIT
’20 Trike and ’08-’20 CVO models and bikes equipped with FLSTF, FLSTFB, FLSTFBS, FXDRS, FXSB and FXSE) and
(71500561 SHOWN) (71500248C SHOWN)
hydraulic clutch. Does not fit ’15-later Softail® models. Some Touring models (except ’15-later Road Glide® and FLHRXS).
models may require rotation of the front master cylinder Does not fit Trike models. Does not fit models equipped
banjo fitting. See the service manual for Brake systems with Large Diameter Handlebars, Handlebar-Mounted GPS,
procedures. Boom!™ Audio Cruiser Amp & Speaker Kits or Tour-Pak®
Mounted CD Changer P/N 77184-01. ’04-later XL and XR
C. CLUTCH FERRULE AND BANJO BOLT models require separate purchase of (2) Screw P/N 3832M.
COVER KIT – CHROME 70213-02C Chrome Left Side.
Die-cast chrome covers provide a custom look to your stock 70248-02B Black Left Side.
banjo bolts and handlebar clutch ferrule. Fits clutch ferrule on
handlebar and banjo bolts on brake master cylinders and cali- Fits ’96-later VRSC, XL, XR, Dyna, Softail (except FLSB, FLSTF,
pers. Installs in seconds. FLSTFB, FLSTFBS, FXDRS and FXSE) and Touring models
32714-98A B. BRAKE & CABLE CLUTCH (except ’15-later Road Glide and FLHRXS). Does not fit Trike
Fits ’84-later models with stock master cylinder and calipers models. Does not fit models equipped with Large Diameter
(except ’02-later VRSC, ’15-later XG, ’04-later XL, ’18-later Handlebars, Handlebar-Mounted GPS, Boom! Audio Cruiser
Softail and ’08-later Touring and Trike). Will not fit models Amp & Speaker Kits or Tour-Pak Mounted CD Changer P/N
equipped with hydraulic clutch. 77184-01. ’04-later XL and XR models require separate
purchase of (2) Screw P/N 3832M.
70255-02B Chrome Right Side.
SOFTAIL TOURING
C. CLUTCH FERRULE AND BANJO BOLT COVER KIT – CHROME F. AUXILIARY ACCESSORY SWITCH G. AUXILIARY ON/OFF SWITCH KIT
HOUSING KIT – BLACK
(SHOWN WITH AUXILIARY ON/OFF SWITCH)
526 CONTROLS CONTROLS 527
Every person is unique. Your overall height, arm reach, upper body length and riding style all dictate your relationship to 55800035A 1.00 29.25 3.80 0.00 9.00 3.14 Satin Black 55800715 1.00 31.60 7.20 7.03 9.84 3.14 Chrome
55800103 1.00 25.75 4.30 8.30 8.50 3.22 Satin Black 55800717 1.00 31.60 7.20 7.03 9.84 3.14 Black
the bike’s controls. Add in the desire for a unique, custom look and your handlebar options multiply exponentially.*
55800188 1.25 32.00 7.00 8.00 10.00 3.22 Chrome 55800719 1.00 34.64 10.33 4.97 13.05 3.14 Chrome
55800198 1.00 25.75 4.30 8.30 8.50 3.22 Chrome 55800721 1.00 34.64 10.33 4.97 13.05 3.14 Gloss Black
REACH ™ HANDLEBARS TALLBOY ™ HANDLEBARS
55800224 0.88 30.00 1.90 8.25 8.40 3.22 Satin Black 55800748 1.25 35.44 3.69 12.48 11.00 3.54 Gloss Black
Recommended for shorter riders, Reach™ Handlebars are Recommended for taller riders, Tallboy™ handlebars enable
shaped to position the hand controls closer to the rider for long-armed riders to more comfortably fit and maneuver 55800225 0.88 30.50 1.60 0.00 12.00 3.22 Satin Black 55800749 1.25 35.44 3.69 12.48 11.00 3.54 Chrome
optimized elbow and wrist position. the motorcycle.
55800237 0.88 30.00 1.90 8.25 8.40 3.22 Chrome 55800750 1.25 35.44 3.71 16.46 11.00 3.54 Chrome
55800238 0.88 30.50 1.60 0.00 12.00 3.22 Chrome 55800751 1.25 35.44 3.71 16.46 11.00 3.54 Gloss Black
YOUR R IDING PO SI T ION 55800252 1.25 33.75 7.25 10.25 10.00 3.22 Chrome 55800856 1 28.5 3 1.5 5.74 – Black Anodize
55800862 1.25** 35.25 5.25 10.50 16.00 3.50 Chrome 55800858 1.25 28.5 3 1.5 5.74 – Black Anodize
55800863 1.25** 35.25 5.25 10.50 16.00 3.50 Gloss Black 55800861 1 28.5 4 0 7.26 3.5 Gloss Black
55800341 1.00 30.75 5.00 -3.00 12.00 3.22 Chrome 55801003 1 32 6.5 8.75 10 3.14 Chrome
55800342 1.00 30.75 5.00 -3.00 12.00 3.22 Satin Black 55864-09 1.00 31.25 5.00 12.00 11.50 3.14 Satin Black
55800345 1.00 28.50 4.75 3.75 7.50 3.14 Satin Black 55914-98 1.00 30.75 7.50 12.25 15.00 3.50 Polished SST
55800386 1.25 31.25 7.25 11.25 9.63 3.20 Chrome 55919-82T 1.00 32.50 9.00 5.00 14.25 3.50 Chrome
55800388 1.25 31.25 7.25 11.25 9.63 3.20 Gloss Black 55954-00 1.00 30.00 9.00 9.50 13.75 3.14 Chrome
55800421 1.25** 27.50 4.00 12.00 9.50 3.00 Chrome 55967-08 1.25 35.50 11.50 4.75 12.25 3.50 Chrome
55800422 1.25** 27.50 4.00 12.00 9.50 3.00 Gloss Black 55975-08A 1.00 30.25 5.75 6.75 9.00 – Chrome
55800430 1.00 27.50 5.50 4.00 8.50 3.14 Chrome 55977-09A 1.25 30.50 7.00 0.00 6.50 3.50 Satin Black
55800431 1.00 27.50 5.50 4.00 8.50 3.14 Gloss Black 55985-10 1.00 30.25 5.75 6.75 9.00 – Satin Black
55800439 1.25 31.00 6.25 14.00 11.25 3.00 Chrome 56021-04B 1.00 31.00 5.75 6.00 8.75 4.25 Chrome
DR AG HA NDLEBAR * BEACH HA NDLEBAR * APE & TA LLBOY HANDLEBAR * 55800440 1.25 31.00 6.25 14.00 11.25 3.00 Gloss Black 56036-08 1.00 31.75 6.50 10.00 15.75 3.50 Chrome
Narrow, flat and more aggressive, drag bars provide Low and wide, a beach bar spreads your arms and Tall and wide, ape and Tallboy™ handlebars
55800548A 1.25 33.75 9.25 14.75 12.50 3.14 Chrome 56075-07 1.00 32.00 6.50 8.75 10.00 3.14 Satin Black
a straight elbow and neutral hand and wrist gives you room to breathe. Ideal for the rider with provide a classic “fists-in-the-wind” look and can
55800549A 1.25 33.75 9.25 14.75 12.50 3.14 Satin Black 56075-07A 1.00 32.00 6.50 8.75 10.00 3.14 Gloss Black
position. For maximum comfort, drag bars can long arms, beach bars can be a little too wide for many add long-haul comfort for riders with long arms. Because
55800550A 1.25 34.75 10.00 12.25 12.50 3.14 Chrome 56079-93T 1.00 32.00 6.50 8.75 10.00 3.14 Chrome
be positioned with curved or straight riders. While selecting a bar, make sure you can reach handlebar height is regulated in many areas,
risers to minimize stretch to the controls. the hand controls when the handlebar is fully turned. check local laws before installing a tall handlebar. 55800551A 1.25 34.75 10.00 12.25 12.50 3.14 Satin Black 56085-83T 1.00 31.00 5.75 6.00 7.75 3.14 Chrome
55800563 1.00 30.00 9.25 5.25 11.75 3.14 Polished SST 56166-08 1.00 32.00 5.50 11.25 13.00 3.14 Chrome
55800568 1.25 31.60 6.42 9.00 11.25 3.00 Chrome 56180-08 1.00 30.00 9.00 9.50 13.75 3.14 Chrome
55800569 1.25 31.60 6.42 9.00 11.25 3.00 Gloss Black 56558-95 1.00 27.00 4.00 0.00 8.50 3.14 Chrome
55800579 1.00 31.75 6.25 7.00 9.00 3.50 Gloss Black 56563-95 1.00 31.50 5.50 9.75 9.50 3.14 Chrome
CHI Z ELED HA NDL EBAR* 55800580 1.00 31.00 4.50 7.25 10.00 3.14 Chrome 56623-99A 1.00 31.25 5.00 12.00 11.50 3.14 Chrome
For cutting edge style, a Chizeled Bar combines the 55800587 1.00 31.00 4.50 7.25 10.00 3.14 Gloss Black 56760-04 1.25 35.50 4.75 12.00 12.25 4.75 Chrome
hands-up feel of a mini-ape with the narrow width of
55800589 1.00 30.81 13.09 6.63 15.14 3.48 Chrome 56857-05 1.25 32.60 6.60 9.01 9.00 3.14 Chrome
a drag bar. The bar’s shoulder-width design keeps the
55800590 1.00 30.81 13.09 6.63 15.14 3.48 Gloss Black 56902-08 1.00 31.25 5.00 12.00 11.50 3.14 Polished SST
elbows in and the arms straight ahead, and the wrist
and hands fall in a neutral palms-down grip. 55800591 1.00 32.39 6.03 11.17 16.16 3.48 Chrome 56943-10B 1.25** 33.54 7.45 12.17 11.00 3.50 Chrome
55800592 1.00 32.39 6.03 11.17 16.16 3.48 Gloss Black 57466-10 1.00 28.80 6.25 5.70 7.00 3.14 Satin Black
55800712 1.25 34.68 7.09 7.75 10.20 3.22 Chrome 57474-11 1.00 35.00 1.75 12.00 16.00 3.50 Chrome
55800714 1.25 34.68 7.09 7.75 10.20 3.22 Gloss Black 57485-11 1.00 35.00 1.75 12.00 16.00 3.50 Satin Black
Tip to Tip
CHOOSING YOUR HANDLEBAR
RISE is the vertical distance between a handlebar’s tip and its base. Pull
Back
Adding risers to bars that sit too low can help put hand grips into your sweet spot.
PULL BACK is the distance the handlebar tips come back toward the rider.
Greater pull back can eliminate the long reach to the bar for a shorter rider. Pull
Rise Back
WIDTH is measured from tip to tip. Make sure the bar isn’t too wide
so it pulls your hands off the grips when turning.
Pull
KNURL CENTER is the distance between the center line of the bar’s knurling. Back
The measurement should match the riser dimension to maximize clamping pressure.
Knurl
Centers Rise
*NOTE: Installation of some handlebars and risers may require a change in clutch and/
or throttle cable and brake lines for some models. Handlebar height is regulated in many
locations. Check local laws to ensure your motorcycle meets applicable regulations. Base
Width
**1.25" Fat Bar base necks down to fit 1.0" handlebar clamp.
528 CONTROLS CONTROLS 529
Handlebars – Dyna®/Softail® Handlebars – Dyna®/Softail®
A. EXTREME REACH™ HANDLEBAR* C. FAT REACH™ HANDLEBAR* – 1.25"
Extensively tested with a panel of riders between 5’-0" to 5’-5" Slammed and styled for a low-profile look, this 1.25" handlebar
tall, this Extreme Reach™ Handlebar and recommended riser places the hand controls closer to the rider for an optimized
CONTROLS
combination was proven to be the most ergonomically pleas- elbow bend and wrist position, offering improved confidence
ing handlebar for many Dyna® and Softail® models. Shaped to and long-range comfort for shorter-armed riders.
provide the ideal balance of pull back and width, this handle-
bar produces an overall pull back of 11.0" and a tip-to-tip width Fits ’18-later FLFB, FLFBS, FLSL, FLSB, FXBR, FXBRS, FXDRS,
of 30.0" when combined with Curved Riser Kit P/N 56266-09 FXFB and FXFBS models. Does not fit FXFB and FXFBS
(sold separately). Your hands fall naturally in place and the models without ABS Brakes. FLSL models require separate
narrow width reduces your stretch while making low-speed purchase of 1.25" handlebar riser kit. All models require sepa-
turns and parking lot maneuvers. rate purchase of additional installation components.
55800563 55800712 Chrome.
Fits ’06-’17 Dyna (except ’14-’17 FXDL) and ’00-’17 Softail 55800714 Gloss Black.
models (except FLSS, FLSTFBS, FXCW, FXCWC, FXS, FXSB,
FXSTD and Springer™). Does not fit CVO™ models. All See your Dealer for cables, lines and
models require separate purchase of additional installation additional installation components required,
components. or visit www.H-D.com/store and search
part number 55800712 or 55800714.
See your Dealer for cables, lines and
additional installation components required, D. TALLBOY™ HANDLEBAR – 1.0"
or visit www.H-D.com/store and search Recommended for riders 5’9" and taller, this 1.0" Tallboy™
part number 55800563. handlebar enables long-armed riders to more comfortably
fit and maneuver Softail® motorcycle. Shaped to provide the
B. REACH HANDLEBAR* – 1.0" A. EXTREME REACH HANDLEBAR A. EXTREME REACH HANDLEBAR ideal balance of rise and width, this bar places the hands in a
Recommended for riders between 5’-2" and 5’-8" tall, this WITH RISER KIT P/N 56266-09 neutral position and stretches the arms to reduce the bend
Reach Handlebar is shaped to position the hand controls at the elbow.
closer to the rider for optimized elbow and wrist position.
Designed to provide the ideal balance of pull back and width, Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXLR, FXST
this handlebar allows your hands fall naturally in place. The and ’21-later FXBBS models. All models require separate
narrower width reduces your stretch while making low-speed purchase of additional installation components.
turns and parking lot maneuvers, and the overall effect is 55800719 Chrome.
improved confidence and long-range comfort for short-armed 55800721 Gloss Black.
riders.
Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXLR, FXST See your Dealer for cables, lines and
and ’21-later FXBBS models. All models require separate additional installation components required,
purchase of additional installation components. or visit www.H-D.com/store and search
55800715 Chrome.
part number 55800719 or 55800721.
55800717 Black.
C. FAT REACH HANDLEBAR – 1.25"
See your Dealer for cables, lines and
additional installation components required,
or visit www.H-D.com/store and search
part number 55800715 or 55800717.
Reach Handlebars
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
B. REACH HANDLEBAR – 1.0" D. TALLBOY HANDLEBAR – 1.0"
530 CONTROLS CONTROLS 531
Handlebars – Dyna®/Softail®/Sportster® Handlebars – Softail®
A. FAT DRAG HANDLEBAR* D. MOTO BAR – BLACK ANODIZED*
Complete the transition to the dark side. The same shape as Made from lightweight aluminum anodized with a black
the Original Equipment polished handlebar on ’08-’17 Fat Bob® finish, this club-style handlebar features a performance-style
CONTROLS
models, this black drag bar places the hands in an aggres- graphic. Pair with tall risers to complete the unique custom
sive but comfortable riding position and complements black look.
finished hand controls and mirrors. 55800856 1"
55977-09A Satin Black. Fits ’18-later FLSL, FXBB, FXBBS, FXBR, FXLR, FXLRS and
Fits ’18-later Softail® models (except FLDE, FLHC, FLHCS, FXST, ’14-later Road King models. Does not fit FXBB, FXBBS
FLSB, FLSL, FXLR , FXLRS and FXLRST), ’17 FXDB, ’08-’17 and FXST models with accessory Quarter Fairing or
FXDF, ’10-’17 FXDWG, ’10-’17 FLSTF and FLSTFB, ’15 FXST, accessory windshields when using original equipment
’10 FXSTB. All models require separate purchase of additional handlebar risers. FXLR models equipped with Color-Matched
components. Quarter Fairing and Tall Risers P/N 55800852 require
separate purchase of Turn Signal Brackets P/N 12700164
See your Dealer for cables, lines and and 67800630. Installation requires separate purchase of
additional installation components required, additional components.
or visit www.H-D.com/store and search 55800858 1.25" Tapered.
part number 55977-09A. Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXBR,
FXBRS, FXDRS, FXFB, FXFBS, FXLR, FXLRS and FXST, ’14-
B. STREET SLAMMER BAR* later Road King models. Does not fit FLFB, FLFBS, FXBR, or
Comfort and attitude in one. This Street Slammer drag bar FXBRS models with accessory windshields. Does not fit
with 7.0" integrated risers offers a stylish alternative to sepa- FXBB, FXBBS and FXST models with accessory Quarter
rate curved risers, bar and handlebar clamp combinations and Fairing or accessory windshields when using original
reduces the stretch required to reach traditional straight bars. equipment handlebar risers. FXLR models equipped with
This 1.25" fat bar is factory drilled to accept hidden control A. FAT DRAG HANDLEBAR – SATIN BLACK D. 1" MOTO BAR – BLACK ANODIZED Color-Matched Quarter Fairing and Tall Risers P/N 55800854
wires for a clean custom look. Available in brilliant chrome or (WIDE GLIDE SHOWN) require separate purchase of Turn Signal Brackets P/N
satin black finish. 12700164 and 67800630. Installation requires separate
purchase of additional components.
Fits ’12-’16 FLD, ’06-’17 FXDB, ’08-’17 FXDF, ’01-’05 FXDL,
’16-’17 FXDLS, ’99-’17 FXDWG, ’00-’17 FLS, FLSS, FLSTC, See your Dealer for cables, lines and
FLSTF, FLSTFB, FLSTFBS, FLSTN, FXST, FXSTB, FXSTC and additional installation components required,
FXSTD, and ’03-’13 FLHR and FLHRC models. All models or visit www.H-D.com/store and search
require separate purchase of additional installation compo-
part number 55800856 or 55800858.
nents. Does not fit Road King® models equipped with cruise
control, ’08 ABS-equipped models, Heated Hand Grips,
E. DRAG BAR*
Hydraulic Clutch Kits, Handlebar Mounted Gauges, Road
This nearly straight 1" drag bar moves the hands forward and
Tech™ Radio, Softail® Nacelle Kit or Sidecar-equipped models.
gives riders a new option for a more aggressive, sporty riding
55975-08A Chrome. position. The dark finish matches other dark components to
55985-10 Satin Black. complete or complement an overall blacked-out style.
55800861 Gloss Black.
See your Dealer for cables, lines and Fits ’18-later FXBB, FXLR, FLSL, FXST and ’21-later FXBBS
additional installation components required, models. Does not fit with accessory windshields on stock
or visit www.H-D.com/store and search risers. Installation requires separate purchase of additional
part number 55975-08A or 55985-10. components.
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
C. DRAG BAR – SATIN BLACK E. DRAG BAR – GLOSS BLACK
(SHOWN ON XL1200X WITH RISER SPACER KIT)
532 CONTROLS CONTROLS 533
Handlebars – Sportster® Handlebars – Dyna®/Softail®/Road King®
A. SPORTSTER TALLBOY® HANDLEBAR* C. HOLLYWOOD HANDLEBAR*
Ergonomically designed and tested by a panel of riders from Original Equipment on the Softail Slim® model, this traditional
5’11" to 6’4", this 1.0" Tallboy® handlebar enables long-armed Hollywood-styled handlebar combines the laid-back riding
CONTROLS
riders to more comfortably fit and maneuver a compact attitude of the ’40s with a shape that’s perfect for today’s new
Sportster® model. Shaped to provide the ideal balance of rise school stripped-down bobbers. With its limited rise, narrow
and width, this bar places the hands in a neutral position and profile and gentle pull back shape, this bar captures the look of
stretches the arms to reduce the bend at the elbow. a classic bar without the wide beach bar riding position.
Fits ’07-later XL models (except XL883R and XL883C). All 55800579 Gloss Black.
models require separate purchase of additional installation Fits ’10-later XL1200X and XL1200XS, ’06-’17 FXDB, ’10-’17
components. FXDWG, ’00-’17 FLSTC, FLSTF and FLSTFB, ’08-’17 FLSTN,
’18-later Softail (except FXFB, FXFBS, FXBR, FXBRS, FXLRS
55800580 Chrome. and FXLRST), ’15-later FLRT models. Requires separate
55800587 Gloss Black. purchase of additional installation components.
See your Dealer for cables, lines and See your Dealer for cables, lines and
additional installation components required, additional installation components required,
or visit www.H-D.com/store and search or visit www.H-D.com/store and search
part number 55800580 or 55800587. part number 55800579.
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
B. IRON 883 HANDLEBAR – SATIN BLACK E. NARROW BEACH HANDLEBAR
(FAT BOY SHOWN)
534 CONTROLS CONTROLS 535
Handlebars – Sportster®/Dyna® Handlebars – Sportster®/Dyna®/Softail®
A. CHIZELED HANDLEBAR* D. MINI-APE HANDLEBAR*
Achieve ultimate cutting-edge style. The Chizeled Bar features The 12" mini-ape chrome 1.0" diameter handlebar delivers a
the edgy profile of the classic Z bar and combines the hands- modestly higher hand position to achieve a traditional look, a
CONTROLS
up feel of a mini-ape with the narrow width of a drag bar. relaxed style, and more comfortable riding position for some
The result? A classic chopper attitude. The 1.0" bar replaces riders.
mitered and welded corners with cast seamless 90° bends
for added strength and style. The cast elbows eliminate sharp Fits ’07-later XL883L, XL883N, XL1200CX, XL1200L, XL1200N,
internal bends and the bar features removable Bar & Shield XL1200NS, XL1200T, XL1200V, XL1200X, XL1200XS, and
plugs to simplify internal wiring. ’18-later FLDE, FLSL and FXLR models. Also fits ’06-’17 FXDB
and ’96-’05 FXDWG models with Original Equipment handle-
Fits ’07-later XL883L, XL883N, XL1200L, XL1200N, XL1200NS, bar P/N 58079-93. XL models require separate purchase of
XL1200T, XL1200V, XL1200X and XL1200XS models. Also fits additional components.
’06-’17 FXDB models with Original Equipment Handlebar P/N 55801003 Chrome.
58079-93. Does not fit with Heated Hand Grips. XL models
55801272 Gloss Black.
require separate purchase of additional components.
55800198 Chrome. See your Dealer for cables, lines and
55800103 Satin Black. additional installation components required,
or visit www.H-D.com/store and search
See your Dealer for cables, lines and part number 55801003 or 56075-07A.
additional installation components required,
or visit www.H-D.com/store and search E. FXSB SOFTAIL® REACH™ HANDLEBAR*
part number 55800198 or 55800103. Shaped to provide the ideal balance of pull back and width,
this chrome-plated bar places riders closer to the controls for
B. CHIZELED LO HANDLEBAR* A. CHIZELED HANDLEBAR – SATIN BLACK a comfortable upright riding position. When combined with
With a low-profile 4.0" rise and a narrow lane-splitting 27" (STREET BOB SHOWN) the Original Equipment Softail® Breakout® curved risers, the
width, this compact Z-bar bar will give your bike a classic West Reach™ Handlebar provides an overall pull back of 7.0". The
Coast look. The 1.0" Chizeled Bar replaces mitered and welded 1.25" diameter handlebar can be internally wired for a clean
corners with cast seamless 90° bends for added strength and look.
style. The cast elbows eliminate sharp internal bends and the 55800188 Chrome.
bar features removable Bar & Shield plugs to simplify inter- Fits ’13-’17 FXSB models. Separate purchase of additional
nal wiring. components required.
Fits ’07-later XL883L, XL883N, XL1200CX, XL1200L, XL1200N,
XL1200NS, XL1200T, XL1200V, XL1200X and XL1200XS, and See your Dealer for cables, lines and
’06-’17 FXDB models. Does not fit with Heated Hand Grips. All additional installation components required,
models require separate purchase of additional components. or visit www.H-D.com/store and search
55800430 Chrome. part number 55800188.
55800431 Gloss Black.
F. HERITAGE SOFTAIL® CLASSIC HANDLEBAR*
D. MINI-APE HANDLEBAR This chrome-plated bar is 1.25" narrower, 2.0" taller, and
See your Dealer for cables, lines and features 2.0" less pullback than the Original Equipment ’09-’17
additional installation components required, FLSTC Heritage Softail® Classic bar. This bar is also a direct
or visit www.H-D.com/store and search replacement for the stainless steel handlebar P/N 56569-86
part number 55800430 or 55800431. featured as Original Equipment on ’86-’08 FLSTC models.
56623-99A Chrome.
C. FAT CHIZELED HANDLEBAR* Fits ’86-’17 FLSTC models. ’09-’17 FLSTC models require
Achieve ultimate cutting-edge style. The Chizeled Bar features separate purchase of cables and brake lines.
the edgy profile of the classic Z bar and combines the hands-
up feel of a mini-ape with the narrow width of a drag bar. The
result? A classic chopper attitude, and a comfortable hand
See your Dealer for cables, lines and
and wrist position for tall riders. When installed with the stock additional installation components required,
riser, this 12" handlebar has the look and feel of a 14" version. or visit www.H-D.com/store and search
The bar replaces mitered and welded corners with cast seam- part number 56623-99A.
less 90° bends for added strength and style. The cast elbows
eliminate sharp internal bends and the bar features removable
Bar & Shield plugs to simplify internal wiring. The fat 1.25" bar
necks down to fit stock 1.0" vehicle handlebar clamps. B. CHIZELED LO HANDLEBAR
55800421 Chrome.
Fits ’12-’16 FLD, ’13-’17 FXDB, ’16-’17 FXDLS, and ’00-’17 FLS,
FLSS, FLSTC, FLSTF, FLSTFB, FLSTFBS, FLSTN, FXST, FXSTB,
FXSTC and ’18-later Softail® (except FXBR, FXBRS, FXFB,
FXFBS, FXLRS and FXLRST). All models require separate
purchase of additional installation components. Does not fit
with stock heated grips or accessory Black Rubber Heated E. FXSB SOFTAIL REACH HANDLEBAR
Hand Grips P/N 56100034.
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
C. FAT CHIZELED HANDLEBAR – CHROME F. HERITAGE SOFTAIL CLASSIC HANDLEBAR
(SOFTAIL DELUXE SHOWN)
536 CONTROLS CONTROLS 537
Handlebars – Softail® Handlebars – Softail®
A. FUSED HANDLEBAR* C. FUSED LO HANDLEBAR*
Combining the edgy profile of a classic Z bar with the knuck- With a low-profile and compact Z-bar design, the Fused Lo Bar
les-up feel of a mini-ape and the narrow width of a drag bar, flexes iconic West Coast style. And with muscular cast corners,
CONTROLS
the Fused Bar delivers a fistful of classic chopper attitude. And the cast elbows eliminate sharp internal bends to simplify
with muscular cast corners, the cast elbows eliminate sharp the internal wiring. The handlebar is 1.25" at the upright
internal bends to simplify the internal wiring. The handlebar is and handles and 1" diameter at the base to fit with Original
1.25" at the upright and handles and 1" diameter at the base to Equipment 1" Handlebar Risers.
fit with Original Equipment 1" Handlebar Risers.
Fits ’18-later ABS enabled FLSL and FXLRS models. All models
Fits ’18-later ABS enabled FXBB, FXBBS, FXLR, FXLRS, FXST require separate purchase of additional components.
models. All models require separate purchase of additional 55801056 Chrome.
components.
55801057 Gloss Black.
55801015 Chrome.
55801016 Gloss Black. D. FUSED LO HANDLEBAR*
The Fused Lo Handlebar is a new take on West Coast style.
B. FUSED HANDLEBAR* With a low-profile and compact Z-bar design, it delivers the
Combining the edgy profile of a classic Z bar with the knuck- classic club look. And with muscular cast corners, the cast
les-up feel of a mini-ape and the narrow width of a drag bar, elbows eliminate sharp internal bends to simplify the inter-
the Fused Bar delivers a fistful of classic chopper attitude. And nal wiring.
with muscular cast corners, the cast elbows eliminate sharp
internal bends to simplify the internal wiring. Fits ’18-later ABS enabled FLFB, FLFBS, FLSB, FXBR, FXBRS
and FXDRS, ’14-’20 Road King®, and ’15-’20 FLRT models. All
Fits ’18-later ABS enabled FLFB, FLFBS, FXBR, FXBRS, FXFB, models require separate purchase of additional components.
FXFBS and FXDRS, ’14-’20 Road King®, and ’15-’20 FLRT 55801058 Chrome.
models. All models require separate purchase of additional
55801059 Satin Black.
components.
55801030 Chrome.
55801029 Black.
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
B. FUSED HANDLEBAR – BLACK D. FUSED LO HANDLEBAR – BLACK
538 CONTROLS CONTROLS 539
Handlebars – Dyna®/Softail®/Road King® Handlebars – Dyna®/Softail®/Road King®
A. 12" FAT MINI-APE HANDLEBAR* C. 16" FAT APE HANDLEBAR*
This true 12" mid-rise Ape Handlebar is the perfect mix of This beefy 16" Fat Ape handlebar is shaped to give even the
comfort and style. This bar features a traditional shape tallest rider the hands-in-the-air riding position. The bar
CONTROLS
that tapers from a narrow base to a wide-open stance, and features a flatter hand position that positions your wrists in a
provides a flatter hand position with slightly less of the turned- neutral position for long ride comfort. This true-height 16" bar
in shape that can put stress on your wrists. The 1.25" diameter can be installed in the Original Equipment risers on models
fat bar is factory drilled to allow internal wiring, and finished factory-equipped with 1.25" handlebars, and the bar is pre-
in your choice of show-quality chrome or gloss black surfaces. drilled to allow internal wiring. Available in your choice of
Handlebar can be installed in the Original Equipment risers on chrome or gloss black finish, these bars are ready to deliver
models factory-equipped with 1.25" handlebars. your custom attitude.
Fits ’14-later Road King® excluding vehicles equipped with Fits ’18-later FLFB, FLFBS, FLSB, FLSL, FXBR, FXBRS, FXBB,
4-point H-D® detachable docking kits and ’18-later FLFB, FXDRS, FXFB, FXFBS, FXLR and FXST models. ’14-later Road
FLFBS, FLSB, FLSL, FXBR, FXBRS, FXBB, FXBBS, FXDRS, King® (except vehicles equipped with 4-point H-D detachable
FXFB, FXFBS, FXLR and FXST models. Models originally docking kits). Models originally equipped with 1.0" handlebar
equipped with 1.0" handlebar will require separate purchase of will require separate purchase of 1.25" handlebar riser kit. All
1.25" handlebar riser kit. All models require separate purchase models require separate purchase of additional installation
of additional installation components. components.
55801326 Chrome. 55801325 Chrome.
55801327 Gloss Black. 55801324 Gloss Black.
See your Dealer for cables, lines and See your Dealer for cables, lines and
additional installation components required, additional installation components required,
or visit www.H-D.com/store and search or visit www.H-D.com/store and search
part number 55800479 or 55800748. part number 55800750 or 55800751.
Shown with: D. 16" FAT APE HANDLEBAR KIT WITH RISER*
1.25" FAT RISER KIT – STREET BOB® AND BREAKOUT® Reach for the sky. This brawny 1.25" Ape Handlebar is the ideal
Required for installation of 1.25" handlebars on FXBB Street choice for the long-armed rider or anyone looking for that
Bob® models, this curved riser kit features a one-piece top classic fists-in-the-wind riding profile. Factory drilled to allow
clamp that is shaped to accept the Original Equipment clamp- internal wiring, the show-quality chrome or satin-black finish
mounted digital gauge package. Kit includes two curved risers complements your bike’s overall design sense. This 16.0" high
and one-piece clamp. bar and riser combination provides the look you crave around
55900157B Gloss Black. town and the bar can be rotated in the clamp and locked down
Fits ’18-later FXBB, FXBBS, FXBR, FXBRS models. to place your hands in your ideal open-road riding position.
Handlebar kit includes matching riser and custom handlebar
B. 12" FAT MINI-APE HANDLEBAR KIT WITH RISER* clamp that conceals the wire exit for a clean look.
Big and beefy in the chopper tradition, this 1.25" Mini-Ape Fits ’12-’16 FLD, ’06-’17 FXDB, ’08-’17 FXDF, ’16-’17 FXDLS,
Handlebar is the perfect finish to an old-school ride. Factory ’99-’17 FXDWG, ’00-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB,
drilled to allow internal wiring, the show-quality chrome or A. 12" FAT MINI-APE HANDLEBAR C. 16" FAT APE HANDLEBAR
FLSTFBS, FLSTN, FXCW, FXCWC, FXST, FXSTB and FXSTC,
black finish reflects your attention to custom details. This 12.0" ’18-later FLFB, FLFBS, FLSB, FLSL, FXDRS and FXLR, and
high bar and riser combination provides the look and attitude ’03-later Road King models. All models require separate
you dream about, but remains comfortable over the long haul. purchase of additional installation components. Does not fit
Handlebar kit includes matching riser and custom handlebar with Hydraulic Clutch Kits, handlebar-mounted gauges, or
clamp that conceals the wire exit for a clean look. Softail® Freight Train Nacelle Kit. Satin Black kit features gloss
Fits ’12-’16 FLD, ’06-’17 FXDB, ’08-’17 FXDF, ’16-’17 FXDLS, black risers.
’99-’17 FXDWG, ’00-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB, 56942-10B Chrome.
FLSTFBS, FLSTN, FXCW, FXCWC, FXST, FXSTB, FXSTC , 55857-10B Satin Black.
’18-later Softail® (except FLSB, FXBB, FXBBS, FXBR, FXBRS,
FXDRS, FXFB, FXFBS, FXLRS, FXLRST and FXST), and See your Dealer for cables, lines and
’03-later Road King models. All models require separate
additional installation components required,
purchase of additional installation components. Fits with
Accessory Heated Grips (except FLHTK Heated Grips or Black
or visit www.H-D.com/store and search
Rubber Accessory Heated Grips). Does not fit with Hydraulic part number 55801325 or 55801324.
Clutch Kits, handlebar-mounted gauges, or Softail® Freight
Train Nacelle Kit. Satin Black kit features gloss black risers.
56832-04C Chrome.
55859-10B Black.
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
B. 12" FAT MINI-APE HANDLEBAR KIT WITH RISER – CHROME D. 16" FAT APE HANDLEBAR KIT WITH RISER – SATIN BLACK
540 CONTROLS CONTROLS 541
Handlebars – Road King® Handlebars – Road King®/Road Glide®
A. ROAD KING® FAT HANDLEBAR* C. ROAD KING®/ROAD GLIDE® REACH™ HANDLEBAR*
Similar to Original Equipment handlebar on the ’14 CVO™ This 1.0" diameter chrome bar has 2.0" more pull back
Road King® model, this beefy 1.25" handlebar places the rider compared to the stock Road King® handlebar. Accepts internal
CONTROLS
in a laid-back riding posture. This handlebar provides 2.0" of wiring for a clean look. The neutral hand position is comfort-
additional pull back and a 1.0" lower hand position than the able for the long haul and the narrow width and pull back
Original Equipment Road King bar. The 1.25" diameter bar design produces a major ergonomic change.
allows you to tuck the wires inside the bar for a clean, custom 56166-08 Chrome.
look. Fits ’08-later FLHR and FLHRC, ’08-’13 FLTR, FLTRU and
55800386 Chrome. FLTRX models. Does not fit FLHRXS models. Does not fit ’08
Fits ’14-later Road King® models. All models require separate ABS equipped models, Sidecar-equipped models or
purchase of additional components for installation. Handlebar Mounted Gauges. All models require separate
purchase of additional components for installation.
See your Dealer for cables, lines and Compatible with accessory heated grips (except FLHTK
additional installation components required, Heated Grips or Black Rubber Heated Hand Grips P/N
or visit www.H-D.com/store and search 56100034).
part number 55800386.
See your Dealer for cables, lines and
B. ROAD KING/ROAD GLIDE® HERITAGE STYLE additional installation components required,
HANDLEBAR* or visit www.H-D.com/store and search
Designed to provide extra touring comfort for the Road King part number 56166-08.
or Road Glide® rider, this 1.0" diameter stainless steel bar
has 3.0" more pull back compared to the stock ’08-’13 Road D. ROAD KING/ROAD GLIDE/FREEWHEELER® TALLBOY™
King handlebar. Heritage Bar has the same dimensions as the HANDLEBAR*
’14-later Road King Original Equipment bar. Designed to provide extra touring comfort for the Road King
56902-08 Polished Stainless Steel. rider, this 1.0" diameter chrome bar is 2.0" higher and 1.5"
Fits ’08-later FLHR and FLHRC and ’08-’13 FLTR, FLTRU, and narrower compared to the stock Road King handlebar.
FLTRX models. All models require separate purchase of 56180-08 Chrome.
additional components for installation. Fits ’08-later FLHR and FLHRC, ’08-’13 FLTR, FLTRU, FLTRX,
and ’15-’20 FLRT models. Does not fit FLHRXS models. Does
not fit ’08 ABS equipped models, Sidecar-equipped models
See your Dealer for cables, lines and or Handlebar Mounted Gauges. All models require separate
additional installation components required, purchase of additional components for installation.
or visit www.H-D.com/store and search Compatible with accessory heated grips (except FLHTK
Heated Grips or Black Rubber Heated Hand Grips P/N
part number 55684-09 or 56902-08. 56100034).
Reach Handlebars
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
B. ROAD KING/ROAD GLIDE HERITAGE STYLE HANDLEBAR D. ROAD KING/ROAD GLIDE TALLBOY HANDLEBAR
542 CONTROLS CONTROLS 543
Handlebars – Batwing Handlebars – Batwing
CHOOSE YOUR BATWING HANDLEBAR B. BATWING REACH™ HANDLEBAR*
Just about every model of Harley-Davidson® motorcycle The Batwing Reach™ Handlebar is shaped to provide all-day
features a different stock handlebar. Selected to complement riding comfort for smaller-stature riders. Extensively tested
CONTROLS
the style or use of the bike, the handlebar may be the ideal by a panel of riders who stand 5’-1" to 5’-5" tall, the Reach
shape for many riders, but of course, not everyone has the Handlebar was ergonomically designed to provide the ideal
same physical characteristics. combination of shoulder position, elbow bend and wrist angle.
The bar brings the grips closer to the rider, and features a
Choosing a bar for your batwing fairing-equipped model is narrower width, lower height and flatter hand position. The
about more than just style – it’s about how you approach the narrow profile also brings the hands in toward the center of
road. Where the bar positions your hands, wrists and arms the vehicle for easier maneuvering.
directly affects how you feel on your motorcycle. For every
set of bars, there are three factors at work: rise, pull back Combining a Reach™ Seat with a Reach Handlebar provides
and width. These three measurements determine your reach a smaller-stature rider with an optimized rider triangle and a
to the hand controls and, therefore, your overall feeling of complete fit solution.
comfort and control.
Fits ’09-later Electra Glide®, Street Glide®, Ultra Limited
BATWING STOCK HANDLEBAR BATWING REACH HANDLEBAR (except ’10-’13 FLHTK) and ’09-later Trike models (except
A. ELECTRA GLIDE® CHROME HANDLEBAR*
Freewheeler®). Also fits ’17-later FLHTKSE and FLHXSE
Replace your stock polished bar with this 1.0", chrome handle-
models. All models require separate purchase of additional
bar that allows you to tuck the wires inside the bar for a clean,
components. Street Glide models and models with fair-
finished look. Identical shape to the Original Equipment
ing-mount mirrors require separate purchase of handlebar-
Electra Glide and Street Glide® bar, this high-quality chrome-
mounted mirrors and Fairing Plugs. Does not fit with Original
plated handlebar is designed to be compatible for use with
Equipment Heated Grips or accessory Black Rubber Heated
TGS-equipped Electra Glide® models.
Hand Grips P/N 56100034.
56036-08 Chrome.
55800589 Chrome.
Fits '09-later Electra Glide®, Street Glide® and Ultra Limited™
models (except CVO™). Does not fit Trike models. All models 55800590 Gloss Black.
require separate purchase of additional components.
See your Dealer for cables, lines and
See your Dealer for cables, lines and additional installation components required,
additional installation components required, or visit www.H-D.com/store and search
or visit www.H-D.com/store and search part number 55800589 or 55800590.
part number 56036-08.
Also available: (not shown)
BATWING REACH HANDLEBAR*
These high-quality handlebars are designed to bring the
controls 2.0" closer to the rider for increased comfort.
Especially helpful for shorter riders or those with short arms.
55914-98 Polished Stainless Steel.
Fits ’02-’07 Electra Glide and Street Glide models. All models
BATWING CHIZELED HANDLEBAR BATWING MINI APE HANDLEBAR B. BATWING REACH HANDLEBAR require separate purchase of additional components. ’08-’13
FLHX and models with fairing-mount mirrors require
separate purchase of handlebar-mounted mirrors and Fairing
Plugs P/N 732 (Qty 2) and 755 (Qty 2). Does not fit models
equipped with Hydraulic Clutch Kits or Sidecar.
Model Family Fitment: *NOTE: Installation of some handlebars and risers may require
a change in clutch and/or throttle cable and brake lines for
V-ROD SPORTSTER DYNA some models. Handlebar height is regulated in many
locations. Check local laws to ensure your motorcycle meets
SOFTAIL TOURING applicable regulations.
A. ELECTRA GLIDE CHROME HANDLEBAR C. BATWING TALLBOY HANDLEBAR
544 CONTROLS CONTROLS 545
Handlebars – Batwing Handlebars – Batwing
A. FUSED HANDLEBAR – BATWING FAIRING* C. BATWING MINI-APE HANDLEBAR*
Bad to the bone attitude never looked so good. Combining Throw your fists in the air with these 12.0" ape handlebar. A
the rise of a mini-ape with the edgy profile of a classic Z bar, favorite among long-armed riders, these bars are shaped to
the Batwing Fused Bar delivers the renegade, fists-in-the- rest your hands just above the top of the classic batwing fair-
wind riding style you crave. And with muscular cast corners, ing. The bars feature a tall stance and minimal amount of pull
the cast elbows eliminate sharp internal bends to simplify the back that help to achieve a cool yet comfortable riding profile.
internal wiring. The 1.25" bar slims down to 1” at the base to fit Finished in brilliant chrome or satin black, these 1.0" handle-
with the Original Equipment handlebar clamps. bars accept internal wiring for a clean look.
Fits ’14-later ABS enabled Electra Glide®, Street Glide™, Fits ’09-later Electra Glide®, Street Glide®, Ultra Limited
Ultra Limited, and Tri Glide® models. Does not fit FLHTKSE (except ’10-’13 FLHTK) and Trike (except FLRT) models. Does
models. All models require separate purchase of additional not fit CVO™ models. All models require separate purchase
components. of additional components for installation. ’09-’13 FLHX and
55801004 Chrome. $403.95 models with fairing-mount mirrors require separate purchase
of handlebar-mounted mirrors and Fairing Plugs. Does not
55801005 Gloss Black. $403.95
fit with Original Equipment Heated Grips or accessory Black
Rubber Heated Hand Grips P/N 56100034.
B. FUSED LO HANDLEBAR* - BATWING FAIRING*
Tuck and ride in style. With a low-slung rise, flat dragbar hand 57474-11 Chrome.
position and compact Z-bar design, the Batwing Fused Lo 57485-11 Satin Black.
Bar places the rider in an aggressive riding posture with
optimal wrist position and elbow bend for supreme riding See your Dealer for cables, lines and
comfort. And with muscular cast corners, the cast elbows additional installation components required,
eliminate sharp internal bends to simplify the internal wiring. or visit www.H-D.com/store and search
The 1.25" bar slims down to 1” at the base to fit with the part number 57474-11 or 57485-11.
Original Equipment handlebar clamps.
Fits ’14-later ABS enabled Electra Glide, Street Glide, D. BATWING CHIZELED HANDLEBAR*
Ultra Limited, and Tri Glide models. Does not fit FLHTKSE Bring cutting edge style to your custom bagger. The Batwing
models. All models require separate purchase of additional Chizeled Bar combines the rise of a 12" mini-ape with the edgy
components. profile of the classic Z bar and the wrist position of a drag bar.
The result? An aggressive hands-in-the-air riding posture.
55801060 Chrome. $383.95
The fat 1.25" bar replaces mitered and welded corners with
55801061 Gloss Black. $383.95 cast seamless 90° bends for added strength and style. The
cast elbows eliminate sharp internal bends to simplify inter-
See your Dealer for cables, lines and nal wiring. The bar slims down to 1.0" at the base to fit with
additional installation components required, Original Equipment handlebar clamps.
or visit www.H-D.com/shop and search
Fits ’14-later Electra Glide, Electra Glide Standard, Street
part number 55801060 or 55801061.
Glide, Ultra Limited and Tri Glide® models. All models require
separate purchase of additional components for installation.
Street Glide models and models with fairing-mounted mirrors
A. FUSED HANDLEBAR C. BATWING MINI-APE HANDLEBAR
require separate purchase of handlebar-mounted mirrors and
fairing plugs. Does not fit with Heated Hand Grips. Does not
fit CVO models.
55800862 Chrome.
55800863 Gloss Black.
*NOTE: Installation of some handlebars and risers may require *NOTE: Installation of some handlebars and risers may require
a change in clutch and/or throttle cable and brake lines for a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many some models. Handlebar height is regulated in many
locations. Check local laws to ensure your motorcycle meets locations. Check local laws to ensure your motorcycle meets
applicable regulations. applicable regulations.
B. FUSED LO HANDLEBAR D. BATWING CHIZELED HANDLEBAR
546 CONTROLS CONTROLS 547
Handlebars – Road Glide Handlebars – Road Glide
CHOOSE YOUR ROAD GLIDE® HANDLEBAR C. FUSED HANDLEBAR – ROAD GLIDE®*
Just about every model of Harley-Davidson® motorcycle Bad to the bone attitude never looked so good. Combining the
features a different stock handlebar. Selected to complement rise of a mini-ape with the edgy profile of a classic Z bar and
CONTROLS
the style or use of the bike, the handlebar may be the ideal the wrist position of a drag bar, the Road Glide Fused Bar deliv-
shape for many riders, but of course, not everyone has the ers the renegade, fistsin- the-wind riding style you crave. And
same physical characteristics. with muscular cast corners, the cast elbows eliminate sharp
internal bends to simplify the internal wiring.
Choosing a bar for your Road Glide® model is about more than
just style – it’s about how you approach the road. Where the Fits ’15-later ABS enabled Road Glide® models. All models
bar positions your hands, wrists and arms directly affects how require separate purchase of additional components. Does
you feel on your motorcycle. For every set of bars, there are not fit ’19-later CVO™ models.
three factors at work: rise, pull back and width. These three 55801007 Chrome. $403.95
measurements determine your reach to the hand controls
55801006 Gloss Black. $403.95
and, therefore, your overall feeling of comfort and control.
D. FUSED LO HANDLEBAR* – ROAD GLIDE®*
A. ROAD GLIDE TALLBOY™ HANDLEBAR* Tuck and ride in style. With a low-slung 9.0” rise, flat drag-
This 1.25" diameter bar features an optimized ergonomic bar hand position and compact Z-bar design, the Road Glide®
design for taller and long-limbed riders. The bar is 2" taller Fused Lo Bar places the rider in an aggressive riding posture
than the Original Equipment handlebar, and is sized to accept with optimal wrist position and elbow bend for supreme riding
internal wiring for a clean look. comfort. And with muscular cast 90° corners, the cast elbows
Fits ’15-later FLTRX, FLTRXS and FLTRU models. All models eliminate sharp internal bends to simplify the internal wiring.
require separate purchase of additional components. Does not Fits ’15-later ABS enabled Road Glide models. All models
fit CVO™ models (except ’20 FLTRXSE). Fits with Accessory require separate purchase of additional components. Does
Heated Grips. Compatible with accessory heated grips (except not fit CVO models.
FLHTK Heated Grips or Black Rubber Heated Hand Grips P/N
56100034). 55801062 Chrome. $383.95
55800550A Chrome. 55801063 Gloss Black. $383.95
55800551A Satin Black.
See your Dealer for cables, lines and
See your Dealer for cables, lines and
additional installation components required,
additional installation components required,
or visit www.H-D.com/store and search
or visit www.H-D.com/store and search
part number 55800862 or 5580863.
part number 55800550A or 55800551A.
*NOTE: Installation of some handlebars and risers may require *NOTE: Installation of some handlebars and risers may require
a change in clutch and/or throttle cable and brake lines for a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many some models. Handlebar height is regulated in many
locations. Check local laws to ensure your motorcycle meets locations. Check local laws to ensure your motorcycle meets
applicable regulations. applicable regulations.
SOFTAIL TOURING
B. ROAD GLIDE FAT APE HANDLEBAR – SATIN BLACK D. FUSED LO HANDLEBAR
548 CONTROLS CONTROLS 549
Handlebar – Road Glide®
A. ROAD GLIDE® CHIZELED LO HANDLEBAR*
With a low 9.0" rise and a flat drag-bar hand position, this
compact Z bar will place the rider into an aggressive, tucked-
in riding posture. Many Road Glide® motorcycle riders feel this
is our most comfortable handlebar, with optimal wrist posi-
tion and elbow bend. The 1.25" Chizeled Bar replaces mitered
and welded corners with cast seamless 90° bends for added HA N DLE BAR R I S E RS
strength and style. The cast elbows eliminate sharp internal
bends and the bar features removable Bar & Shield plugs to
simplify internal wiring. Bars are available in brilliant chrome
or gloss black finishes to match your bike’s custom direction.
Fits ’15-later FLTRX and FLTRXS models. Does not fit ’18-later You may think you are perfectly happy with the way your bike is adjusted. But that doesn’t mean that it is correctly
FLTRXSE or models equipped with 21" Knockout™ Wheel
Kit P/N 43300494 or 43300496. All models require sepa- set up for you. We get used to our bikes — our muscles become trained and we end up accommodating
rate purchase of additional components. Does not fit CVO™
models. Compatible with accessory heated grips (except the bike. It is far better to take the time to make the bike accommodate you. If you are satisfied with your handlebar’s
FLHTK Heated Grips or Black Rubber Heated Hand Grips P/N
56100034). width and wrist position, but wish it was just a little higher, lower or closer to you, your dealer can
55800568 Chrome. recommend a set of handlebar risers that move the bar into your comfort zone.
55800569 Gloss Black.
BAR BAR
DIAMETER HEIGHT PULL BACK DIAMETER HEIGHT PULL BACK
DESCRIPTION (IN) (IN) (IN) FINISH KIT P/N DESCRIPTION (IN) (IN) (IN) FINISH
Road King®, Batwing Touring & Trike 1.00 1.70 0.00 Cast Alum 55996-09 Black Fat Risers 1.25 5.0 0.6 Gloss Black
Road Glide® 1.25 1.70 0.00 Cast Alum 56269-09 Curved Pull Back, 4.0" 1.25 4.0 1.3 Chrome
Softail® – FLSTC, FLS & FLSS 1.00 1.94 0.39 Chrome/Black 56267-09 Curved Pull Back, 6.0" 1.25 6.0 1.7 Chrome
Softail – FLSTF, FLSTFB & FLSTFBS 1.25 2.40 0.87 Chrome/Black 56066-82A Curved Riser, 4.0" 1.00 4.4 1.5 Chrome
Softail – FLSTN 1.00 4.45 1.30 Chrome 56266-09 Curved Riser, 6.0" 1.00 6.0 1.7 Chrome
Softail – FXSB 1.25 4.00 1.15 Chrome 55900023 Deluxe Pull Back Riser 1.00 4.4 0.8 Chrome
Dyna® – FLD 1.00 3.10 1.18 Chrome 55900122 Fat Riser 1.25 1.0 0.0 Chrome
Dyna – FXDB 1.00 1.00 n/a Polished Alum 55900123 Fat Riser 1.25 1.0 0.0 Gloss Black
Dyna – FXDL 1.00 4.39 1.61 Polished Alum 55900165 Slim Pull Back Riser 1.00 4.5 1.5 Gloss Black
Dyna – FXDF & FXDWG 1.25 5.00 0.60 Gloss Black 55900166 Clamp and Riser Kit 1.00 1.0 0.0 Gloss Black
XL – 1200C 1.00 4.73 1.13 Chrome 55900194 Clamp and Riser Kit 1.25 2.6 0.1 Gloss Black
*NOTE: Installation of some handlebars and risers may require
a change in clutch and/or throttle cable and brake lines for XL – 883N 1.00 2.07 0.00 Wrinkle Black 55800852 Tall Riser 1 5.5 0 Black Anodize
some models. Handlebar height is regulated in many
XL – 883L & 1200T 1.00 2.07 0.00 Black 55800854 Tall Riser 1.25 5.5 0 Black Anodize
locations. Check local laws to ensure your motorcycle meets
applicable regulations. XL – 1200L, 1200CP & 1200V 1.00 1.86 0.00 Chrome 56929-10 Fat One-Piece Riser, Chrome 1.25 4.1 0.0 Chrome
XL – 1200CX 1.00 1.21 0.00 Black 56916-07 Fat-Bar Risers 1.25 3.6 0.0 Chrome
Model Family Fitment:
XL – 1200X 1.00 0.94 n/a Gloss Black 46809-09 Riser Kit for Nacelle 1.00 1.9 0.0 Chrome
V-ROD SPORTSTER DYNA
VRSC™ – VRSCD & VRSCDX 1.00 2.68 0.40 Black 56063-82A Straight Riser, 4.0" 1.00 4.0 0.0 Chrome
SOFTAIL TOURING
B. ROAD GLIDE CHIZELED HANDLEBAR
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.
550 CONTROLS CONTROLS 551
Handlebar Risers Handlebar Risers
A. TALL HANDLEBAR RISER – BLACK ANODIZED E. FAT HANDLEBAR RISER KIT*
This 5.5" riser kit gives your bike a “club”-style look along with Designed to enable the installation of a 1.25" handlebar on
the versatility of a traditional riser and handlebar combination. models originally equipped with a 1.0" bar, these low-profile
CONTROLS
Aggressive, muscular styling combines with a black anodized risers feature a one-piece top clamp for added support and
finish to help you complete an eye-catching performance look. style. Available in mirror chrome or gloss black finish, these
Available in 1.0" and 1.25" sizes. Top clamp sold separately. kits include matching installation hardware.
55800854 1.25" Fits ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL,
Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXBR, and FXLR models.
FXBRS, FXDRS, FXFB, FXFBS, FXLR, FXLRS, FXST, ’14-later
Road King® models. Requires separate purchase of 55900122 Chrome.
appropriate top clamp. Moto bar on stock and tall risers does 55900123 Gloss Black.
not fit with accessory windshields on FLFB, FXBR and FXBB,
FXBBS models. F. HANDLEBAR CLAMP & RISER KIT – GLOSS BLACK*
55800852 1" Go for a total blackout. Replace your Original Equipment Riser.
Fits ’18-later FLSL, FXBB, FXBBS, FXLR, FXLRS, FXST, and Includes all necessary mounting hardware.
’14-later Road King models models. Requires separate A. TALL HANDLEBAR RISER – BLACK ANODIZED E. FAT HANDLEBAR RISER KIT – CHROME E. FAT HANDLEBAR RISER KIT – GLOSS BLACK 55900166
purchase of appropriate top clamp. Moto bar on stock riser Fits ’18-later Softail® models (except FXBB, FXBBS, FXBR,
or tall riser does not fit with quarter fairing or accessory FXBRS, FXDRS and FXST) equipped with 1" handlebars.
windshields on FXBB and FXBBS models.
G. FAT RISER KIT – CHROME*
B. GAUGE CLAMP KIT – BLACK This riser features a one-piece base that is designed for use
Required for installation of tall risers. Designed for motor- with internally wired 1.25" handlebars and provides a skirt that
cycles equipped with the standard digital gauge in the riser. conceals the wiring’s exit from the bar. The matching handle-
Aluminum construction reduces weight, with aggressive, bar clamp ties it all together. Available in mirror chrome finish,
muscular styling to help complete an overall performance the kit includes riser, matching handlebar clamp and clamp
look on your motorcycle. Available for 1.0" or 1.25" diameter hardware.
handlebars. 56929-10
55900228 1.25" Fits most 1.25" diameter handlebars. Does not fit FXSB,
Fits ’18-later FXBB, FXBBS, FXBR, FXBRS, FXDRS, FXST FXSBSE, FXBB, FXBBS, FXBR, FXBRS, FXST and Springer™
models equipped with Tall Riser Kit P/N 55800854. models or ’21-later Touring and Trike models. Requires
55900227 1" separate purchase of additional components. Riser height
Fits ’18-later FXBB, FXBBS, FXBR, FXBRS, FXDRS, FXST 4.1’’. See your dealer for details.
models equipped with Tall Riser Kit P/N 55800852.
H. FAT BAR RISER KIT – CHROME*
C. HANDLEBAR TOP CLAMP KIT – BLACK Go phat with bold chrome-plated risers. Hidden fasten-
Required for installation of tall risers. Designed for motorcy- ers create a clean, seamless look. Kit includes all necessary
cles without the digital gauge in the riser. Aluminum construc- mounting hardware.
tion reduces weight, with aggressive, muscular styling to help 56916-07
complete an overall performance look on your motorcycle. Fits most 1.25" diameter handlebars. Does not fit FXSB,
Available for 1.0" or 1.25" diameter handlebars. B. GAUGE CLAMP KIT – BLACK F. HANDLEBAR CLAMP & RISER KIT – G. FAT RISER KIT – CHROME FXSBSE, FXBB, FXBBS, FXBR, FXBRS, FXST and Springer™
GLOSS BLACK
55900237 1.25" models. Requires separate purchase of additional
Fits ’18-later FLFB, FLFBS, FLSL, FXFB, FXFBS, FXLR and components. Riser height 3.6’’. See your dealer for details.
FXLRS, and ’14-’20 Road King models equipped with Tall
Riser Kit P/N 55800854. I. CURVED PULL BACK FAT RISERS – CHROME*
55900238 1" These chrome-plated Curved Pull Back Risers provide a
Fits ’18-later FXLR, FLSL, FXLRS and ’14-later Road King comfortable riding position for those who like the shape, width
models equipped with Tall Riser Kit P/N 55800852. and hand position of their current handlebar, but wish it was
closer. For an ergonomically friendly ride, these risers can be
D. HANDLEBAR RISER & CLAMP KIT – GLOSS BLACK combined with a Harley-Davidson® Reach® Seat and Profile®
Required for installation of 1.25" handlebars on select ’18-later Low suspension components to reduce arm stretch and to
Softail® models. This straight riser gives different hand posi- plant the feet firmly on the ground.
tion, placing your hands and arm higher. Features a one-piece Fits most 1.25" handlebars. Does not fit FXSB, FXSBSE, FXBB,
top clamp that is shaped to accept the Original Equipment FXBBS FXBR, FXBRS, FXST and Springer™ models. Requires
clamp-mounted digital gauge package. Kit includes two separate purchase of additional components. See your dealer
curved risers and one-piece clamp. for details.
55900194 56269-09 4" Curved Riser.
Fits ’18-later FXBB, FXBBS, FXBR, FXBRS, FXDRS models.
56267-09 6" Curved Riser.
C. HANDLEBAR TOP CLAMP KIT – BLACK H. FAT BAR RISER KIT – CHROME
D. HANDLEBAR RISER & CLAMP KIT – GLOSS BLACK I. CURVED PULL BACK FAT RISERS – 4" I. CURVED PULL BACK FAT RISERS – 6"
CHROME CHROME
552 CONTROLS CONTROLS 553
Handlebar Risers Handlebar Risers
A. SOFTAIL SLIM® PULL BACK RISER KIT* D. RISER CUP WASHER KIT – CHROME
Ideal for riders with a short reach or for those who prefer an Add a finishing touch to the riser on your bike. This kit includes
upright riding position, these curved risers and the matching two styled and chrome-plated washers that replace the stan-
CONTROLS
handlebar clamp are shaped to put the Original Equipment dard metal washers below the handlebar risers. Replaces
Softail Slim® handlebar closer to the rider. Designed for easy Original Equipment P/N 56159-73.
installation, these 4.5" high risers are compatible with the 56486-01
stock control cables for a low-cost conversion. Provides 1.75" Fits ’97-’03 XL, ’86-’17 Dyna® (except FXDB) and Softail®
of rise and 1.5" of additional pull back when compared to the models (except Springer™, FXS and FXSTD). Does not fit
stock FLS riser. with Polyurethane Handlebar Bushings P/N 56165-03.
Fits most ’12-’17 FLS and FLSS and ’18-later FLSL models.
’15-’17 FLS and FLSS models equipped with ABS brakes E. HANDLEBAR CLAMP HARDWARE KIT – CHROME
require separate purchase of Brake Line P/N 41800300. Also Finish the show-winning look with brilliant chrome hardware.
fits most 1.0" diameter handlebars with separate purchase of Manufactured to Original Equipment specifications, this kit
additional components. Does not fit Springer™ models. Riser replaces the zinc-plated exposed handlebar clamp bolts with
height 4.5". chrome-plated socket head cap screws.
55900023 Chrome. A. SOFTAIL SLIM PULL BACK RISER KIT – CHROME D. RISER CUP WASHER KIT – CHROME 94451-05
Fits ’05-’17 FLSTN, ’94-’17 FLSTS, FLSTSB, FLSTSC, FXSTD,
55900165 Gloss Black.
FXSTDSE, FXSTS and FXSTSB and ’07-’08 FXSTSSE models.
B. HANDLEBAR RISER KITS – CHROME* 94452-05
These chrome-plated risers provide a comfortable riding posi- Fits ’06 FXD, FXDB, FXDC and FXD35, ’94-’06 FXDL, ’94-’05
tion for those who like the shape, width and hand position of FXDWG, ’99-’00 FXR2 and FXR3, ’94-’17 FLST, FXST, FXSTB,
their current 1.0" handlebar, but wish it was closer. For an ergo- FXSTC, ’94-’08 FLSTC, ’94-’06 FLSTF and ’93-’96 FLSTN
nomically friendly ride, these risers can be combined with a models.
Harley-Davidson® Reach® forward-position seat and Profile® 94453-05
Low suspension components to reduce arm stretch and to Fits ’95-’13 XL (except XL883C, XL883N, XL1200C, XL1200L,
plant the feet firmly on the ground. Finish off the look with a XL1200N, XL1200V and XL1200X) and ’94-’05 FXD, FXDC,
Harley-Davidson® decorative handlebar clamp kit. FXDX, FXDXT and FXDS-CONV. models.
94454-05
Fits most 1.0" handlebars. Does not fit FXBB, FXBBS, FXBR, Fits ’96-later XL models (except for XL50, XL883, XL1200,
FXBRS, FXST and Springer™ models or ’21-later Touring and XL1200S, XL1200R, ’02-’12 XL883R and ’05-’10 XL883L),
Trike models. Installation may require separate purchase ’96-’06 XL883C and XL1200C, ’07-’17 Dyna, ’00 FXR4, ’05-
of handlebar clamp. Installation also may affect fitment of ’06 FLSTFSE, ’10-’12 FLSTSE, ’13-’17 FXSB, ’16-’17 FXSE and
handlebar-mounted instruments. See your dealer for details. ’13-’14 FXSBSE models.
56066-82A 4.0" Curved Risers.
56063-82A 4.0" Straight Risers. F. HANDLEBAR CLAMP BOLT COVERS
56266-09 6.0" Curved Risers. Complete the chrome hand control conversion. These thin-
wall bolt covers are designed for easy installation over handle-
C. POLYURETHANE HANDLEBAR RISER BUSHINGS bar clamp bolts. The machined brass and chrome-plated
These Handlebar Riser Bushings replace the Original covers are corrosion resistant and the internal spring steel
A. SOFTAIL SLIM PULL BACK RISER KIT – GLOSS BLACK E. HANDLEBAR CLAMP HARDWARE KIT – CHROME
Equipment stacked rubber and zinc washer combination with retention clip resists vibration and thermal cycling to securely
a long-lasting polyurethane bushing and cover. These firm hold the covers in place. Kit includes 4 covers.
bushings provide a direct link between the bar and the front 94413-04
fork for a solid feel – and they reduce the softness you expe- Fits .3125" socket head handlebar clamp bolts. Does not fit
rience when a tall or wide handlebar is installed in Original ’15-’20 XG, ’07-’17 FLSTF, ’08-’17 FXCW, FXSB, FXSBSE, ’18-
Equipment vibration-isolating rubber mounts. later FLFB, FLFBS, FXBB, FXBBS, FXBR, FXBRS, FXFB,
56298-03A FXFBS, FXLR, FXLRS, FXLRST, FXST or Touring models.
Fits ’83-later Touring models. Kit includes replacement bolts.
Does not fit Trike models. G. LIVE TO RIDE HANDLEBAR CLAMP
56165-03 56178-92TA Gold.
Fits ’97-’03 XL, ’86-’17 Dyna® (except ’08-’12 FXDB) and ’86- Fits ’74-’06 XL, FX, FXR, FX Dyna and FX Softail models with
’17 Softail® (except Springer™, FXS and FXSTD) models. ’86- stock and accessory 1.0" diameter handlebar (except ’96-’06
’93 FL Softail® models require use of ’94-later riser bolts. Will XL883C and XL1200C and ’99-’06 FXR).
not fit with Chrome Riser Cup Washer Kit P/N 56486-01.
H. CUSTOM HANDLEBAR CLAMPS
Fits ’74-’06 XL, FX, FXR, FX Dyna and FX Softail models with
stock and accessory 1.0" diameter handlebar (except ’96-’06
XL883C and XL1200C and ’99-’06 FXR).
56170-83TA Classic Chrome.
56567-86B Bar & Shield.
B. HANDLEBAR RISER KIT – CHROME B. HANDLEBAR RISER KIT – CHROME F. HANDLEBAR CLAMP BOLT COVERS G. LIVE TO RIDE HANDLEBAR CLAMP
STRAIGHT CURVED
*NOTE: Installation of some handlebars and risers may require Model Family Fitment:
a change in clutch and/or throttle cable and brake lines for
some models. Handlebar height is regulated in many V-ROD SPORTSTER DYNA
locations. Check local laws to ensure your motorcycle meets
applicable regulations. SOFTAIL TOURING
C. POLYURETHANE HANDLEBAR RISER BUSHINGS H. CUSTOM HANDLEBAR CLAMPS
AUDIO & GAUGES
Measure your next journey in songs, not miles.
With a Harley-Davidson sound system, you’ll
lose yourself in your own soundtrack. And with
Bluetooth®-enabled wireless communication, you
can stay connected, even in the middle of nowhere.
556 AUDIO & GAUGES 557
Rockford Fosgate® Audio
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
FOSGATE® – STAGE I FAIRING SPEAKERS
HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD FOSGATE® Upgrade Original Equipment Batwing or Road Glide fair-
ing speakers for more volume and improved sound qual-
ity. Vibration-tested 6.5" waterproof 4 ohm speakers feature
injection molded woofer cones with a high-flux Neodymium
magnet and bridge-mounted 25mm tweeter. Harley-Davidson
powered by Rockford Fosgate® speakers feature a two-year
Get ready to be blown away by a sonic storm. Harley-Davidson® Audio powered by Rockford Fosgate® is warranty. Complete kit includes retainers, hardware, left and
right speakers and grilles.
designed to be the new standard of motorcycle audio performance and customization. Harley-Davidson 76000982 Road Glide® Fairing
and Rockford Fosgate have worked together to create the highest performing, most advanced audio Fits ’14-later Road Glide models (except FLTRXSE). Requires
system riders have ever experienced. This is truly Legendary Sound from two legendary brands. purchase of Fairing Speaker Install Kit P/N 76000992,
found in traditional component speaker set-ups, plus the are aligned to the motorcycle rider's position -- sound is always SOFTAIL TOURING
design allows for a quicker install. directed for an optimal on-road audio experience. B. HARLEY-DAVIDSON AUDIO POWERED BY C. HARLEY-DAVIDSON AUDIO POWERED BY
ROCKFORD FOSGATE STAGE II FAIRING ROCKFORD FOSGATE – FAIRING SPEAKER
SPEAKERS – BATWING INSTALLATION KIT
558 AUDIO & GAUGES AUDIO & GAUGES 559
Rockford Fosgate® Audio Rockford Fosgate® Audio
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD D. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
FOSGATE® – STAGE I SADDLEBAGS SPEAKERS FOSGATE® – STAGE I TOUR-PAK® / AIR COOLED
Turn your motorcycle into a concert hall. Speakers mounted in FAIRING LOWER SPEAKERS
saddlebag lids surround rider and passenger with sound and Upgrade Original Equipment Tour-Pak speakers for more
increase the over-all volume of the audio system. Vibration- volume and improved sound quality. Adding fairing lower
tested 5x7" waterproof 4 ohm speakers feature injection speakers to your current two-speaker or four-speaker system
molded woofer cones with a high-flux Neodymium magnet increases the available sound pressure level, permitting
and bridge-mounted 25mm tweeter. Harley-Davidson higher listening volume, lower distortion, and improved clar-
powered by Rockford Fosgate® speakers feature a two-year ity at highway speeds. Vibration-tested 6.5" waterproof 4 ohm
warranty. Complete kit includes left and right speakers and speakers feature injection molded woofer cones with a high-
grilles. flux Neodymium magnet and bridge-mounted 25mm tweeter.
76000986 Harley-Davidson powered by Rockford Fosgate® speakers
Fits ’14-later Touring models (except ’14-’16 FLHXSE and feature a two-year warranty. Complete kit includes left and
right speakers and grilles.
SOFTAIL TOURING
C. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE – SADDLEBAG SPEAKER F. HARLEY-DAVIDSON AUDIO POWERED BY G. HARLEY-DAVIDSON AUDIO POWERED BY
INSTALLATION KIT ROCKFORD FOSGATE – TOUR-PAK SPEAKER ROCKFORD FOSGATE – AIR-COOLED FAIRING
INSTALLATION KIT LOWER SPEAKER INSTALLATION KIT
560 AUDIO & GAUGES AUDIO & GAUGES 561
Rockford Fosgate® Audio Rockford Fosgate® Audio
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
FOSGATE® – STAGE I TWIN-COOLED™ MODELS FOSGATE® AMPLIFIER
FAIRING LOWER SPEAKERS Powerful, intelligent amplifier technology engineered to
Adding fairing lower speakers to your current two-speaker perform in the demanding motorcycle environment. This new,
or four-speaker system increases the available sound pres- compact amplifier is easy to install in the motorcycle saddlebag.
sure level, permitting higher listening volume, lower distor- R-Tune: Equalization is specific to the motorcycle environ-
tion, and improved clarity at highway speeds. Vibration-tested ment, designed from the ground up to be stronger and louder,
4.75" waterproof 8 ohm speakers feature injection molded to overcome road rumble and wind noise. Left and right speak-
woofer cones with a high-flux Neodymium magnet and ers are designed to project sound directly at the rider for an
bridge-mounted 20mm tweeter. Harley-Davidson powered enhanced audio experience. M-DEQ™ (Motorcycle Dynamic
by Rockford Fosgate® speakers feature a two-year warranty. EQ): Our smart amplifier adaptively changes the EQ points
Complete kit includes sub-assembly, hardware, left and right in real time, meaning the tune changes to ensure incredible
speakers and grilles. sound quality no matter the motorcycle speed or riding condi-
tions. BME (Bass Management Enhancement): Designed to
SOFTAIL TOURING
C. HARLEY-DAVIDSON AUDIO POWERED BY D. HARLEY-DAVIDSON AUDIO POWERED BY F. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE –
ROCKFORD FOSGATE –TWIN-COOLED™ LOWER ROCKFORD FOSGATE – AMPLIFIER 400W 4-CHANNEL (SECONDARY)
SPEAKER INSTALLATION KIT CVO MODEL WIRE HARNESS
562 AUDIO & GAUGES AUDIO & GAUGES 563
Rockford Fosgate® Audio Audio – Subwoofers
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
FOSGATE® – PRIMARY AMPLIFIER INSTALLATION KIT FOSGATE® SUBWOOFER KIT
Kit includes the hardware and wiring harnesses required The deep bass will turn heads when you roll up playing your
to install a Harley-Davidson® Audio powered by Rockford Harley-Davidson® Audio powered by Rockford Fosgate®
Fosgate® Primary Amplifier. Harley-Davidson® Audio powered Subwoofer Kit. Designed for 2014-later Touring bikes equipped
by Rockford Fosgate® speakers are sold separately. with Harley-Davidson® Audio powered by Rockford Fosgate®
76000974 audio, these plug-and-play 10-inch subwoofers enable heart-
Fits ’17-later Touring models (except FLHXSE and FLTRXSE thumping bass while cruising around the city streets or out
and ’22-later FLHTKSE and FLTRKSE)). For use with Primary on the open road. Can be installed as a single subwoofer or a
Amplifier Kit P/N 76000997. FLHTKSE and FLTRUSE require dual subwoofer set.
separate of Harness Kit P/N 76001100. - Single or dual woofer flexibility provides as much big bass
76001045 sound as you want
Fits ’14-’16 Touring models (except FLHXSE and FLTRXSE). - Entire subwoofer enclosure may be removed without tools
B. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE – SECONDARY AMPLIFIER D. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD
INSTALLATION KIT FOSGATE SUBWOOFER KIT – PRIMARY
SOFTAIL TOURING
C. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE – TRIKE AMPLIFIER E . HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD
INSTALLATION KIT FOSGATE SUBWOOFER KIT – SECONDARY
564 AUDIO & GAUGES Harley-Davidson® Audio powered by AUDIO & GAUGES 565
Rockford Fosgate® Audio with Bluetooth Rockford Fosgate® FITMENT GUIDE Rockford Fosgate® Audio
A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
FOSGATE® - AMPLIFIER WITH DSP FOR ROAD KING®
MODELS
STREET GLIDE ® /STREET GLIDE SPECIAL MODELS (‘14-LATER)
Here’s the foundation of the ultimate motorcycle audio experi-
ence for Harley-Davidson® Road King® motorcycles. Powerful, STAGE 1 STAGE 2
intelligent amplifier with digital signal processing (DSP) tech- PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
nology developed jointly by Harley-Davidson and Rockford
Fosgate® is engineered to perform in the demanding motor- FAIRING 76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers
cycle environment. Connects to your mobile device via
76000992 Fairing Speaker Installation Kit 76000992 Fairing Speaker Installation Kit
Bluetooth to play stored or streaming audio through Harley-
Davidson Audio powered by Rockford Fosgate® speakers
(sold separately) and turns your Road King® motorcycle into 76000986 Stage 1 Saddlebags Speakers 76000987 Stage 2 Saddlebags Speakers
a concert hall.
SADDLEBAG
76000979 Saddlebag Speaker Installation Kit 76000979 Saddlebag Speaker Installation Kit
kit specific to the speaker kit A. HARLEY-DAVIDSON AUDIO POWERED BY ROCKFORD FOSGATE – AMPLIFIER WITH DSP FOR Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
- Dimensions: 8.13" x 5.39" x 2.01" ROAD KING® MODELS (SHOWN WITH SADDLEBAG SPEAKERS)
Requires separate purchase of color-matched tour-pak/speaker pods Requires separate purchase of color-matched tour-pak/speaker pods
- Learn More about the Harley-Davidson® Audio powered by
Rockford Fosgate® products at Harley-Davidson.com
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
76001074 AMPLIFIER
Fits ’14-later Road King® models (except FLHRC). Requires Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; except Primary Amplifier Installation Kit ('14-16 Touring; except
speaker setups 76001045 76001045
separate purchase of installation kit P/N 76001113. Required FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
for the installation of one Harley-Davidson® Audio powered
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
by Rockford Fosgate® Stage ll speaker kit. Does not fit with 76 0 0 0 9 74
FLHXSE/FLTRXSE)
76 0 0 0 9 74
FLHXSE/FLTRXSE)
Saddlebag Guard Rails.
76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
B. ROAD KING® AMPLIFIER INSTALLATION KIT SECONDARY
Includes components required for installation of Harley-
Davidson® Audio powered by Rockford Fosgate® Amplifier P/N AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
76000979 Saddlebag Speaker Installation Kit 76000979 Saddlebag Speaker Installation Kit
Requires separate purchase of color-matched saddlebag speaker lids Requires separate purchase of color-matched saddlebag speaker lids
76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
FAIRING
LOWER 76000978 Air-Cooled Lower Speaker Installation Kit 76000978 Air-Cooled Lower Speaker Installation Kit
C. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD FOSGATE® – INNER FAIRING AUDIO KIT Requires separate purchase of color-matched fairing lowers Requires separate purchase of color-matched fairing lowers
566 AUDIO & GAUGES Harley-Davidson® Audio powered by Harley-Davidson® Audio powered by AUDIO & GAUGES 567
Rockford Fosgate® Audio Rockford Fosgate® FITMENT GUIDE Rockford Fosgate® FITMENT GUIDE Rockford Fosgate® Audio
ROAD GLIDE ® /ROAD GLIDE SPECIAL MODELS (‘14-LATER) continued ULTRA CLASSIC ® MODEL (‘14-’19) continued
TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers STAGE 1 STAGE 2
Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
Requires separate purchase of color-matched tour-pak/speaker pods Requires separate purchase of color-matched tour-pak/speaker pods SECONDARY 76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
AMPLIFIER
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER Required for 6-8
76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; except Primary Amplifier Installation Kit ('14-16 Touring; except speaker setups only
speaker setups 76001045 76001045
FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
76000988 Stage 1 Twin-Cooled™ Engine Fairing Lower Speakers 76000989 Stage 2 Twin-Cooled™ Engine Fairing Lower Speakers
FAIRING 76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers FAIRING
76000992 Fairing Speaker Installation Kit 76000992 Fairing Speaker Installation Kit LOWER 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit
SADDLEBAG 76000986 Stage 1 Saddlebags Speakers 76000987 Stage 2 Saddlebags Speakers TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
76000979 Saddlebag Speaker Installation Kit 76000979 Saddlebag Speaker Installation Kit Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
Requires separate purchase of color-matched saddlebag speaker lids Requires separate purchase of color-matched saddlebag speaker lids
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER
76000988 Stage 1 Twin-Cooled™ Engine Fairing Lower Speakers 76000989 Stage 2 Twin-Cooled™ Engine Fairing Lower Speakers Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; except Primary Amplifier Installation Kit ('14-16 Touring; except
FAIRING speaker setups 76001045
FLHXSE/FLTRXSE)
76001045
FLHXSE/FLTRXSE)
LOWER 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
76 0 0 0 9 74 76 0 0 0 9 74
FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
TOUR-PAK
Luggage Carrier 76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit SECONDARY
AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER Required for 6-8
Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; except Primary Amplifier Installation Kit ('14-16 Touring; except speaker setups only
speaker setups 76001045 76001045
FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
76 0 0 0 9 74
FLHXSE/FLTRXSE)
76 0 0 0 9 74
FLHXSE/FLTRXSE) TRI GLIDE ® MODEL – TWIN-COOLED ™ ENGINE (‘14-LATER)*
STAGE 1 STAGE 2
76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
SECONDARY PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers
Required for 6-8 FAIRING
speaker setups only 76000992 Fairing Speaker Installation Kit 76000992 Fairing Speaker Installation Kit
ULTRA CLASSIC ® MODEL (‘14-’19) TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
Luggage Carrier Tour-Pak Speaker Installation Kit
76000977 Tour-Pak Speaker Installation Kit 76000977
STAGE 1 STAGE 2
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers AMPLIFIER
FAIRING Required for ALL Primary Amplifier Installation Kit ('14-'16 Trike, except Free- Primary Amplifier Installation Kit ('14-'16 Trike, except Free-
speaker setups 76001046 76001046
76000992 Fairing Speaker Installation Kit 76000992 Fairing Speaker Installation Kit wheeler, models) wheeler, models)
Primary Amplifier Installation Kit ('17-Later Trike, except Primary Amplifier Installation Kit ('17-Later Trike, except
76000976 76000976
76000986 Stage 1 Saddlebags Speakers 76000987 Stage 2 Saddlebags Speakers Freewheeler®, models) Freewheeler®, models)
SADDLEBAG
76000979 Saddlebag Speaker Installation Kit 76000979 Saddlebag Speaker Installation Kit *Up to 4 Speaker Set Only on Trike Models *Up to 4 Speaker Set Only on Trike Models
Requires separate purchase of color-matched saddlebag speaker lids Requires separate purchase of color-matched saddlebag speaker lids
FAIRING 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers CVO ™ TRI GLIDE ® MODEL (‘20-’21)*
LOWER 76000978 Air-Cooled Lower Speaker Installation Kit 76000978 Air-Cooled Lower Speaker Installation Kit STAGE 1 STAGE 2
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers
Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
FAIRING
76001100 Fairing Speaker Installation Kit 76001100 Fairing Speaker Installation Kit
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER
Required for ALL
76001045
Primary Amplifier Installation Kit ('14-16 Touring; except
76001045
Primary Amplifier Installation Kit ('14-16 Touring; except TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
speaker setups FLHXSE/FLTRXSE) FLHXSE/FLTRXSE) Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
76 0 0 0 9 74 76 0 0 0 9 74
FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
568 AUDIO & GAUGES Harley-Davidson® Audio powered by Harley-Davidson® Audio powered by AUDIO & GAUGES 569
Rockford Fosgate® Audio Rockford Fosgate® FITMENT GUIDE Rockford Fosgate® FITMENT GUIDE Rockford Fosgate® Audio
CVO ™ TRI GLIDE ® MODEL (‘20-’21)* continued CVO ™ STREET GLIDE ® MODEL (‘21)
STAGE 1 STAGE 2
STAGE 1 STAGE 2
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
AMPLIFIER 76000997 Amplifier 400W 4 Channel w/ DSP -Primary) 76000997 Amplifier 400W 4 Channel w/ DSP -Primary FAIRING – – – FACTORY INSTALLED
Required for ALL Primary Amplifier Installation Kit ('17-Later Trike, except Primary Amplifier Installation Kit ('17-Later Trike, except
76000976 76000976
speaker setups Freewheeler®, models) Freewheeler®, models) SADDLEBAG – – – FACTORY INSTALLED
*Up to 4 Speaker Set Only on Trike Models *Up to 4 Speaker Set Only on Trike Models
76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
FAIRING
Requires separate purchase of color-matched fairing lowers Requires separate purchase of color-matched fairing lowers
STAGE 1 STAGE 2
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
76000980 Stage 1 Batwing Fairing Speakers 76000981 Stage 2 Batwing Fairing Speakers
TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
FAIRING Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
76001100 Fairing Speaker Installation Kit 76001100 Fairing Speaker Installation Kit
Requires separate purchase of color-matched tour-pak/speaker pods Requires separate purchase of color-matched tour-pak/speaker pods
FAIRING 76000988 Stage 1 Twin-Cooled™ Engine Fairing Lower Speakers 76000989 Stage 2 Twin-Cooled™ Engine Fairing Lower Speakers
76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
LOWER 76000991 ™
Twin-Cooled Engine Lower Speaker Installation Kit 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit SECONDARY
AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers Required for 6-8
TOUR-PAK speaker setups only
Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER CVO ™ ROAD GLIDE ® MODEL (‘21)
Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; FLHXSE/ Primary Amplifier Installation Kit ('14-16 Touring; FLHXSE/
speaker setups 76001045 76001045
FLTRXSE) FLTRXSE)
STAGE 1 STAGE 2
Primary Amplifier Installation Kit ('17-Later Touring; except Primary Amplifier Installation Kit ('17-Later Touring; except
76 0 0 0 9 74 76 0 0 0 9 74 PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
FLHXSE/FLTRXSE) FLHXSE/FLTRXSE)
STAGE 1 STAGE 2 Required removal of Fairing Spoilers Required removal of Fairing Spoilers
PA RT N U M B E R DESCRIPTION PA RT N U M B E R DESCRIPTION
76000982 Stage 1 Road Glide Fairing Speakers 76000983 Stage 2 Road Glide Fairing Speakers TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
FAIRING Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
76001100 Fairing Speaker Installation Kit 76001100 Fairing Speaker Installation Kit
Requires separate purchase of color-matched tour-pak/speaker pods Requires separate purchase of color-matched tour-pak/speaker pods
76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
FAIRING 76000988 Stage 1 Twin-Cooled™ Engine Fairing Lower Speakers 76000989 Stage 2 Twin-Cooled™ Engine Fairing Lower Speakers SECONDARY
LOWER 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit 76000991 Twin-Cooled™ Engine Lower Speaker Installation Kit AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
Required for 6-8
speaker setups only
TOUR-PAK® 76000984 Stage 1 Tour-Pak / Air Cooled Lower Speakers 76000985 Stage 2 Tour-Pak / Air-Cooled Lower Speakers
Luggage Carrier 76000977 Tour-Pak Speaker Installation Kit 76000977 Tour-Pak Speaker Installation Kit
76000997 Amplifier 400W 4 Channel w/ DSP -Primary 76000997 Amplifier 400W 4 Channel w/ DSP -Primary
AMPLIFIER
Required for ALL Primary Amplifier Installation Kit ('14-16 Touring; FLHXSE/ Primary Amplifier Installation Kit ('14-16 Touring; FLHXSE/
speaker setups 76001045 76001045
FLTRXSE) FLTRXSE)
76000990 Amplifier 400W 4-channel - Secondary 76000990 Amplifier 400W 4-channel - Secondary
SECONDARY
AMPLIFIER 76000975 Secondary Amplifier Installation Kit 76000975 Secondary Amplifier Installation Kit
Required for 6-8
speaker setups only
570 AUDIO & GAUGES AUDIO & GAUGES 571
S E L E C T YOU R SYS T E M B O O M ! ™ A U D I O S Y S T E M S —
STAG E I OR STAG E II STAG E I BOOM ! ™ AU D I O SYS T E MS
Your bike’s factory-equipped Boom!™ Box in-dash audio system and speakers are designed to provide enjoyable full-range Boom!™ Audio Stage I systems take your sound to the next level. When compared to the factory-installed Original
sound quality, at a volume level you can hear on the open road. With the addition of Boom! Audio speakers and Equipment audio system, Boom! Audio Stage I speakers feature larger woofers for deeper bass and
amplifiers you’ll get louder, ride-enhancing sound — thanks to increased frequency response, lower distortion and strong soft-dome tweeters for better balanced sound quality. Efficient Stage I speakers can be easily powered with the
mid-range performance that cut through wind noise. Designed specifically for your ride, Boom! Audio equipment built-in amplifier in the factory-installed Boom Box Infotainment System, or with the addition of Boom!™
doesn’t just sound great — it’s engineered tough to withstand the harsh outdoor environment. Audio amplifiers, the larger speakers can produce more volume at all frequencies. A custom EQ was developed for
each configuration of speakers to get the most out of the Stage I system.
GRILLE
2
3
1
2
NEO MAGNET
DOME
T WEETER
VOICE COIL
1 SUSPENSION
SPIDER
6.5" ROUND SPEAKER (BATWING ® FAIRING SPEAKER SHOWN) 6.5" ROUND SPEAKER (ROAD GLIDE ® FAIRING SPEAKER SHOWN) STAGE I BOOM!™ AUDIO – CUTS THROUGH ROAD NOISE TO DELIVER EVERY NOTE
THE FIRST STEP – Add amplifier(s) and upgrade the factory speakers
Street Glide® & Road Glide® Electra Glide® & Road Glide® Ultra
1 # of # of
What Are My Speaker Sound What Are My Speaker Sound
Speakers/ Speakers/
1 Options? Locations Output Options? Locations Output
Amplifiers Amplifiers
3
2
Upgrade Stock 2/1 Upgrade Stock 4/1
Speakers 150 watts Speakers 300 watts
2
WANT MORE? HERE ARE YOUR OPTIONS.
I RIDE I RIDE
4/1 6/2
1 WOOF ER 2 T W EETER 1 WOOFER 2 MID-FREQUENCY DRIVER 3 TW EETER TWO-UP TWO-UP
300 watts 450 watts
4-Speaker* 6-Speaker*
Boom! Audio Stage I systems achieve clear highs and deep bass for great sound quality. Boom! Audio Stage II systems achieve the highest quality and purest sound THE
I RIDE
6/2 ULTIMATE 8/2
experience on the market with the deepest bass and clearest mids and highs. SOLO & 2-UP
Single amplified, two-way 100-watt per channel speakers feature: 450 watts SYSTEM 600 watts
6-Speaker*
8-Speaker*
- A woofer and tweeter that deliver great-sounding low and high frequencies Bi-amplified, three-way 150-watt per channel speakers feature:
- A woofer, a midrange and a tweeter that deliver low, mid and high frequencies THE
- One 75-watt amplifier channel that powers each speaker ULTIMATE 8/2 = Factory Speaker Locations
through the best driver design
SYSTEM 600 watts = Additional Speaker Locations*
- Two 75-watt amplifier channels that power each speaker – one powers the
8-Speaker*
woofer and one powers the midrange/tweeter combo
572 AUDIO & GAUGES AUDIO & GAUGES 573
Boom!™ Audio – Stage I Boom!™ Audio – Stage I
A. BOOM!™ AUDIO AMPLIFIER KIT BOOM!™ AUDIO STAGE I BAGGER AMP &
Take your music to the streets. Boom!™ Audio Amplifier Kits SPEAKER KITS
allow you to crank up the volume without distortion. The ampli- Fill the air with sound from this Boom!™ Audio Boom Bagger
fier provides more power than Original Equipment radio alone, Kit. Available to fit 2- and 4-speaker models, this complete
resulting in increased volume, fuller sound reproduction and audio kit provides the latest in Harley-Davidson® audio compo-
reduced clipping. Unlike aftermarket amplifiers that connect nents. When installed, the increased power of the ampli-
between the radio and the speakers, the Boom! Audio ampli- fier provides the speakers with a clean signal and a custom
fier bypasses the radio’s internal power amp to produce the equalization is available to further optimize the performance
cleanest sound possible. The Boom! Audio Amplifier boosts of the Boom! Audio speaker system. Speakers feature two-
the pure source signal, minimizing any distortion generated year warranty. Dealer Digital Technician™ software update is
through the speaker output. The system-matched high-output required. Dealer installation is recommended. Ensure maxi-
signal features optimized sound equalization for crisp, clear mum output of your audio system with the recommended
vocals and maximum bass response and the strong midrange High Output Charging System P/N 29900028A. Note: The
response cuts through wind and road noise. The marine use of the Boom! Audio Amplifier turns off the radio’s internal
See Page 773 for complete list of available THE FIRST STEP – Add amplifier(s) and upgrade the factory speakers
color-matched options.
Street Glide® & Road Glide® Electra Glide® & Road Glide® Ultra
E. BOOM! AUDIO SPEAKER INSTALLATION KIT – TRIKE BODY
# of # of
What Are My Speaker Sound What Are My Speaker Sound
Speakers/ Speakers/
Options? Locations Output Options? Locations Output
Amplifiers Amplifiers
I RIDE I RIDE
4/2 6/3
TWO-UP TWO-UP
600 watts 900 watts
4-Speaker* 6-Speaker*
Fairing Speakers 76000524A Fairing Speakers 76000524A Fairing Lower Speakers 76000660
Fairing Lower
Fairing & Tour-Pak
ers and separate mid- and high-frequency drivers. An indus-
Fairing Amp w/ Mount 76000278A Fairing Amp w/ Mount 76000278A Installation Kit – ’14-’16 76000586 try-leading driver design utilizing premium materials to deliver
Tour-Pak Speakers 76000526A Installation Kit – ’17-later 76000749 FAIRING MOUNTED increased accuracy, durability, and responsiveness. Powered
AMPLIFIER by a dedicated 300-watt RMS amplifier, each pair of speak-
Saddlebag Lid Speakers 76000319B Installation Kit –’14-’16 76000585 Fairing Lower Speaker Amp 76000277B
ers is capable of producing “filling-rattling” volume. Designed
Installation Kit –’14-’16 76000584 Installation Kit – ’17-later 76000751 Installation Kit 76000734
Saddlebag
Tour-Pak
Fairing Lower
Saddlebag Lids – Right† 90200826 Installation Kit – ’17-later 76000751 of fairing-mounted speakers and a 300-watt amp to a full bore
Installation Kit – ’14-’16 76000586
Tour-Pak Speaker Amp 76000277B 8-speaker, 4-amp, 1200-watt system, we’ve got you covered.
Installation Kit – ’17-later 76000749
Fairing Lower Speakers** 76000353A Fairing Lower Speaker Amp 76000277B Tour-Pak Speaker Pods 76000505 A. BOOM! AUDIO AMPLIFIER KIT
Fairing Lower
Installation Kit – ’14-’16 76000586 Fairing Lower Speaker Boxes† 76000497 Audio Input Harness – ’15-’16 69201477 Take your music to the streets. Boom! Audio Amplifier Kits
allow you to crank up the volume with significantly less
Installation Kit – ’17-later 76000749
distortion. The amplifier provides more power than Original
Fairing Lower Speaker Amp 76000277B Equipment radio alone, resulting in increased volume, fuller
Saddlebag Lid Speakers 76000319B ’18 FLTRXSE/FLTRXSE (Air/Oil-Cooled)
Fairing Lower Speaker Boxes† 76000497 sound reproduction and reduced clipping. Unlike aftermar-
Installation Kit – ’14-’16 76000584 Tour-Pak Speakers 76000526A
Saddlebag
ket amplifiers that connect between the radio and the speak-
Tour-Pak
Installation Kit – ’17-later 76000745 Installation Kit 76000751 ers, the Boom! Audio amplifier bypasses the radio’s internal
Tour-Pak® Speakers*** 76000526A Saddlebag Speaker Amp 76000277B power amp to produce the cleanest sound possible. The
T-Pak Speaker Amp 76000277B TOUR-PAK SPEAKERS TOUR-PAK MOUNTED
Tour-Pak
Installation Kit – ’14-’16 76000585 Boom! Audio Amplifier boosts the pure source signal, mini-
Saddlebag Lids – Left† 90200827 T-Pak Speaker Pods 76000505 AMPLIFIER mizing any distortion generated through the speaker output.
Installation Kit – ’17-later 76000751 Saddlebag Lids – Right† 90200826 The system-matched high-output signal features optimized
Tour-Pak Speaker Amp 76000277B sound equalization for crisp, clear vocals and maximum bass
Tour-Pak Speaker Pods 76000505 FLHTKSE (Twin-Cooled)* response and the strong midrange response cuts through
FLHTCU/FLHTCUL/FLHTK/FLHTKL wind and road noise. The marine-grade, Class D, 4-channel,
Fairing Speakers 76000524A 75-watts RMS/channel amplifier (300-watt RMS total) has
(Twin-Cooled)*
Tour-Pak Speakers 76000526A
ware and wiring harness. Note: The use of the Boom! Audio
Fairing
Fairing Speakers 76000594A Fairing Amp w/ Mount 76000278A Installation Kit – ’17-later 76000751
Amplifier turns off the radio’s internal amplifier.
Fairing Amp w/ Mount 76000523 Tour-Pak Speakers 76000526A Tour-Pak Speaker Amp 76000277B
76000278A Fairing Mounted.
Installation Kit – ’14-’16 76000585 Interconnect Harness – ’14-’17 69200714 Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited and
Saddlebag Lid Speakers 76000319B Installation Kit – ’17-later 76000751 Interconnect Harness – ’17-later 69201930 Tri Glide® models equipped with a Boom! Box audio system.
Tour-Pak Speaker Amp 76000277B Does not fit ’22-later CVO™ models. Dealer Digital
Installation Kit – ’14-’16 76000584 Jumper Harness 69200489
Saddlebag
SADDLEBAG-MOUNTED
AM/FM/WB Antenna P/N 76000862, Electra Glo™
Saddlebag Lids – Left† 90200827 Installation Kit – ’14-’16 76000586 Installation Kit – ’14-’16 76000584 AMPLIFIER #2
Headlamp Trim Rings or Fairing Edge Lights.
Saddlebag
Saddlebag Lids – Right† 90200826 Installation Kit – ’17-later 76000749 Installation Kit – ’17-later 76000745 76000523 Fairing Mounted.
Fairing Lower Speaker Amp 76000277B Saddlebag Speaker Amp 76000277B SADDLEBAG SADDLEBAG-MOUNTED Fits ’15-later FLTRU, FLTRX and FLTRXS models. Original
SPEAKERS AMPLIFIER #1 Equipment on ’15-’20 CVO™ Road Glide® model. Dealer
Fairing Lower Speakers **
76000353A Saddlebag Lids – Left† 90200827 Digital Technician software update is required. Does not fit
Fairing Lower
Installation Kit – ’14-’16 76000586 Saddlebag Lid Speakers 76000319B Saddlebag Lids – Right† 90200826 ’22-later CVO models. Dealer installation is recommended.
Installation Kit – ’17-later 76000749 Installation Kit – ’14-’16 76000584 Saddlebag Handle Kit 90201116 Separate purchase of Power Extension Harness
Saddlebag
Tour-Pak Speakers*** 76000526A Tour-Pak Speakers 76000526A Boom!™ Box audio system. Does not fit ’22-later CVO
models. Required to add a 2nd, 3rd or 4th set of speakers.
Tour-Pak
Installation Kit – ’14-’16 76000585 Installation Kit – ’14-’16 76000585 Dealer Digital Technician software update is required. Dealer
Installation Kit – ’17-later 76000751 FLTRU (Twin-Cooled)* Installation Kit – ’17-later 76000751 installation is recommended.
Tour-Pak Speaker Amp 76000277B Fairing Speakers 76000594A Tour-Pak Speaker Amp 76000277B
Fairing & Tour-Pak
Tour-Pak Speaker Pods 76000505 Fairing Amp w/ Mount 76000523 Interconnect Harness 69200714
Tour-Pak Speakers 76000526A Jumper Harness 69200489
Installation Kit – ’17-later 76000746A Installation Kit – ’14-’16 76000586 Saddlebag Lids – Left† 90200827
Tour-Pak Speaker Amp 76000277B Installation Kit – ’17-later 76000749 Saddlebag Lids – Right† 90200826
Fairing Lower Speaker Amp 76000277B Saddlebag Handle Kit 90201116
Trike Body Speakers 76000526A * ’14-’16 models with 6- and 8-Speaker Systems
Saddlebag Lid Speakers 76000319B
Body
Installation Kit – ’14-’16 76000617 require installation of High Output Charging System
Installation Kit – ’14-’16 76000584 P/N 29900028A.
Saddlebag
Also available:
BOOM! AUDIO STAGE I/II FAIRING LOWER SPEAKER
INSTALLATION KIT
Kit includes wiring harness required for installation of Boom!
Audio Fairing Lower Speaker Kit P/N 76000660 on ’14-’17
CVO™ Street Glide® models.
76000734
Fits ’14-’17 FLHXSE models.
BOOM!™ BOX SOFTWARE UPDATE CENTER BOOM!™ BOX SOFTWARE UPDATE CENTER
Get the latest software for your Boom!™ Box Infotainment Get the latest software for your Boom! Box Infotainment
System here. Each highly recommended update improves the System here. Each highly recommended update improves the
quality of the system, keeping it running at maximum effec- quality of the system, keeping it running at maximum effec-
tiveness. Start by logging on to www.H-D.com/infotainment tiveness. Start by logging on to www.H-D.com/infotainment
Simply review the list, select your infotainment model number, Simply review the list, select your infotainment model number,
download the file to a USB memory stick. Then insert it in your download the file to a USB memory stick. Then insert it in your
Boom! Box Infotainment System’s USB port and follow the Boom! Box Infotainment System’s USB port and follow the
onscreen instructions to update your system. onscreen instructions to update your system.
TALK TIME Time in hours of usage Up to 13 Hours Up to 13 Hours Up to 12 Hours Up to 10 Hours Model Family Fitment:
PHONE
BUTTON
PHONE SPEAKER AND
BUTTON CAMERA
MICROPHONE PORT
JOG DIAL
MP3 PORT
STATIC BOOM
Model Family Fitment: MICROPHONE Model Family Fitment:
STATIC BOOM
JOG DIAL
MICROPHONE
LED STATUS LIGHT
STATUS LED
MP3 PORT
BLUETOOTH
MESH INTERCOM BUTTON
ANTENNA
AND ANTENNA
JOG DIAL
EARBUD
PHONE BUTTON PORT
AMBIENT MODE
BUTTON
MP3 PORT
AMBIENT MODE
BUTTON SPEAKERS
B. BOOM! AUDIO 30K BLUETOOTH HELMET HEADSET A. BOOM! AUDIO 20S EVO BLUETOOTH HELMET HEADSET
592 AUDIO & GAUGES AUDIO & GAUGES 593
Headsets Headsets
B. BOOM!™ AUDIO 10S BLUETOOTH® HELMET HEADSET A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD
Like the flagship Boom! Audio 30K Bluetooth® Headset, the FOSGATE® - STAGE I SPEAKERS FOR WIRELESS
Boom!™ Audio 10S Bluetooth Motorcycle Helmet Headset HEADSETS
offers an exceptional integrated experience when paired to Upgrade audio performance with these Harley-Davidson®
your bike’s Boom! Box infotainment system via the Wireless Audio powered by Rockford Fosgate® - Stage I Speakers for
Headset Interface Module (WHIM), sold separately. When Wireless Headsets. These in-helmet speakers were designed
paired with the WHIM, you can enjoy full stereo sound, use in collaboration with the audio experts at Rockford Fosgate®
the bike’s infotainment screen to configure your headset, to deliver increased frequency response and reduced total
and leverage the existing hand controls to ensure safe and harmonic distortion for superior bass and clarity when
controlled riding as you move effortlessly through music, compared to previous generation Boom! Bluetooth
phone, GPS and push-to-talk intercom conversations. If Communication speakers. Provide noticeable audio playback
equipped with the new Boom! Box GTS radio, this head- improvement at volume for improved sound quality at
set will enable the use of Apple CarPlay. Without the WHIM, highway speeds. Provide more bass response at all volume
you can control your 10S through available hands-free voice levels. Easy installation as a replacement for speakers in
B. BOOM! AUDIO 10S BLUETOOTH HELMET HEADSET C. BOOM! AUDIO HALF HELMET MUSIC AND COMMUNICATIONS HEADSET
594 AUDIO & GAUGES AUDIO & GAUGES 595
Antennas Headsets
D. BOOM! AUDIO FULL HELMET PREMIUM MUSIC AND A. HIDDEN AM/FM/WB ANTENNA
COMMUNICATIONS HEADSET Hide the AM/FM/WB antenna inside the fairing for a clean,
Great-sounding foam-covered stereo earphones comfort- uncluttered look. Uniquely tuned to the Harley-Davidson®
ably fit into ear pockets in the helmet and the fine wires are radio, this enhanced Hidden Antenna offers reception perfor-
easy to hide beneath the helmet liner for a clean installa- mance equivalent to the Original Equipment whip antenna
tion. The quick-disconnect plug allows you to step away from and superior to the Shorty Antenna. Perfect for your clean
the motorcycle without removing the helmet and the coiled slick custom bagger, this Hidden Antenna is also the ideal
cord permits freedom of movement in the saddle. The 7-pin addition to models equipped with H-D® Detachables™ Tour-
DIN plug can be connected to the front and rear communica- Pak® luggage because it eliminates the need to move the whip
tions ports, allowing both rider and passenger access to the antenna back and forth between Tour-Pak luggage and fender
music, navigation and voice communications features of your mounting locations. Kit includes all required mounting hard-
motorcycle and the microphone has been optimized for supe- ware and wiring.
rior clarity when connected to Harley-Davidson intercom and
NOTE: Relative antenna performance as compared to stock
Bike-to-Bike communications equipment.
Stock on select CVO™ Touring models, the complete kit A. ANALOG SPEEDOMETER/TACHOMETER – 5"
includes high performance rotor, stator, voltage regulator and Gauges feature speedometer and tachometer pointers that
all gaskets and hardware required for installation. sweep clockwise to provide a “gauge within a gauge” look. Kit
29900028A includes a data transfer cable to easily upload initial mileage
Fits ’11-’16 Touring, ’10-’16 CVO Touring and ’09-’16 Trike at time of installation.
models. Stock on ’14-’16 FLHTKSE, FLHXSE and FLTRUSE.
Fits ’12-’17 Dyna, ’11-’17 Softail (except ’11-’12 FLSTSE)
H. ELECTRICAL CONNECTION UPDATE KIT* and ’14-later FLHR, FLHRC and FLHRXS models with a 5.0"
Speedometer.
69201599A
Fits ’18-later Softail® models and ’17-later Touring and Trike 74774-11D Spun Aluminum Dial, MPH.
as a mid-bike connector (near the seat). 74775-11C Spun Aluminum Dial, KPH.
69200722 70900171C Spun Aluminum Dial, MPH/KPH.
Fits ’14-’16 Touring and Trike models. G. 54-AMP HIGH OUTPUT CHARGING SYSTEM
74776-11D Black Dial, MPH.
69201750 74777-11C Black Dial, KPH.
Fits ’18-later Softail models as a front-bike connector (near
the handlebars). Fits ’04-’11 Dyna, ’04-’10 Softail (except FLSTSE) and ’04-’13
72673-11 Road King models (except ’07-’08 FLHRSE) equipped with a
Fits ’14-later XL, ’12-’17 Dyna® and ’11-’17 Softail models. 5" Speedometer.
70900070B Spun Aluminum Dial, MPH.
I. SWITCHED CIRCUIT ADAPTER HARNESS* 70900071A Spun Aluminum Dial, KPH.
70264-94A 70900072A Spun Aluminum Dial, MPH/KPH.
Fits ’94-later Touring and Trike models. Required on ’14-later
Touring and Trike models when connecting multiple powered B. DIGITAL SPEEDOMETER/ANALOG TACHOMETER – 4"
accessories using Electrical Connection Kit P/N 69200722, The digital speed reading can be easily toggled between
71400129, or 69201599A. MPH and KPH to simplify cross-border travel. Mileage rein-
69201706 statement resides in the vehicle ECM so initial mileage will be
Fits ’18-later Softail models and ’17-later Touring and Trike uploaded at the time of installation.
models. Required when connecting the CoolFlow™ Fan and A. COMBINATION ANALOG SPEEDOMETER/TACHOMETER – 5" BLACK DIAL 70900475 Spun Aluminum Dial, MPH/KPH.
another powered accessory using Electrical Connection Kit U.S. models. Fits ’14-later XL, ’12-’17 Dyna and ’11-’17 Softail
P/N 69201599A. models equipped with 4" speedometer. XL models require
separate purchase of Fuel Sensor Kit P/N 61200008A to
J. ELECTRICAL ACCESSORY ADAPTER* make use of the fuel level and range function.
70270-04A 70900100C Spun Aluminum Dial, MPH/KPH.
Fits ’07-later VRSC™, ’04-’13 XL and XR, ’04-’11 Dyna, ’04-’10 Non-U.S. models. Fits ’14-later XL, ’12-’17 FXDB and FXDWG,
Softail and ’04-’13 Touring models. Also fits ’14-later Touring ’11-’17 FXCWC, FXS and FXSB models equipped with 4"
and Trike when equipped with a third or fourth pair of H. ELECTRICAL CONNECTION UPDATE KIT – I. SWITCHED CIRCUIT ADAPTER HARNESS
(69201599A SHOWN) speedometer. XL models require separate purchase of Fuel
Boom!™ Audio Stage II speakers. Sensor Kit P/N 61200008A to make use of the fuel level and
range function.
K. SAE 2-PIN TO USB ADAPTER 70900274 Spun Aluminum Dial, MPH/KPH.
69201149 Worldwide Models. Fits ’04-’13 XL (except XR, XL50 and ’04-
Fits H-D® 12V Battery Charging Harnesses. Does not fit ’08 XL1200R), ’04-’11 Dyna models with 4" speedometer and
Electric Vehicles. ’08-’10 FXCW and FXCWC models. ’07-’13 XL models require
separate purchase of Fuel Sensor Kit P/N 61200008A to
Also available: make use of the fuel level and range function. Does not fit
SAE 2-PIN Y-HARNESS XL883 models equipped with Screamin’ Eagle® 1200cc Stage
69201150 I Conversion Kit P/N 29784-07 and 30003-10.
Fits H-D 12V Battery Charging Harnesses. Does not fit
Electric Vehicles. Also available:
FUEL LEVEL SENSOR KIT
*NOTE: It is possible to overload your motorcycle’s charging In-tank sending unit employs capacitive sensing technology
system by adding too many electrical accessories. If your to accurately monitor the fuel level and relays the information
combined electrical accessories operating at any one time to the Speedo/Tach LCD display for at-a-glance viewing. Kit
consume more electrical current than your vehicle’s charging includes sending unit, wiring harness and all necessary instal-
system can produce, the electrical consumption can lation hardware.
discharge the battery and cause vehicle electrical system 61200008A
damage. Ask your dealer for advice about the amount of Fits ’07-later XL models equipped with Combination Digital
current consumed by additional electrical accessories. Speedometer/Analog Tachometer P/N 70900274,
70900100C or 70900475.
J. ELECTRICAL ACCESSORY ADAPTER K. SAE 2-PIN TO USB ADAPTER B. DIGITAL SPEEDOMETER/ANALOG TACHOMETER – 4" SPUN ALUMINUM DIAL
600 AUDIO & GAUGES AUDIO & GAUGES 601
Gear Indicator & Gauges Fairing Mount Gauges
C. SPUN ALUMINUM FACE SPEEDOMETER A. CUSTOM FACE GAUGES
Add a touch of luxury and style to your dash. First featured on Add a rich, custom look to your dash. First featured on the
the ’04 Screamin’ Eagle® Deuce™ and Electra Glide® motor- ’14-’15 CVO™ models, these chrome-accented gauges feature
cycles, these spun aluminum metal-faced gauges offer a rich backlighting and large, easy-to-read numbers for at-a-glance
contrast to a chrome console or black inner fairing surface. viewing. Gauges are plug-in ready and require no additional
The gauges feature subtle Harley-Davidson® racing orange splicing or re-wiring for installation. Mileage reinstatement is
backlighting for a unique nighttime look. Mileage reinstate- available through your Dealer.
ment is available through your Dealer.
Fits ’14-later Electra Glide®, Road Glide®, Street Glide® and
Fits ’04-’06 FXDWG, ’06 FXD35, ‘07 FXDC and ’04-’06 Softail® Ultra Limited models. Original Equipment on some CVO™
and Road King® models. models.
67313-05A 5" Speedometer – MPH. 70900773B Speedo/Tach Cluster – MPH.
67315-05A 5" Speedometer – KPH. 70900777B Speedo/Tach Cluster – KPH.
E. CUSTOM FUEL CAP – DOMINION BRONZE E. CUSTOM FUEL CAP – GLOSS BLACK Fits ’04-’07 Road King models.
62823-06D Chrome.
*Some local regulations prohibit using colored lights during
vehicle operation on public streets. May not conform to local
lighting regulations.
COLOR SHOP
10800055 1.0" Chrome. Stone Washed White Pearl 90200827EOB $309.95 90200826EOB 76000497EOB $309.95
Superior Blue 90200827DWC $309.95 90200826DWC 76000497DWC $309.95
10800057 1.0" Black.
Tahitian Teal 90200827EOX $349.95 90200826EOX 76000497EOX $309.95
Fits all models with 1.25" handlebars. Twisted Cherry 90200827EFH $309.95 90200826EFH 76000497EFH $309.95
10800056 1.25" Chrome. Velocity Red Sunglo 90200827DZT $309.95 90200826DZT — —
10800058 1.25" Black. Vivid Black 90200827DH $279.95 90200826DH 76000497DH $309.95
White Sand Pearl 90200827EVD $309.95 90200826EVD 76000497EVD $309.95
Wicked Red 90200827EFF $309.95 90200826EFF 76000497EFF $309.95
Wicked Red Denim 90200827EKG $309.95 90200826EKG 76000497EKG $309.95
Zephyr Blue 90200827EPB $349.95 90200826EPB 76000497EPB $309.95
CVO™ Primary Color
Auburn Sunglo with Black Hole/Rich Bourbon 90201906EHT $349.95 90201907EHT
*NOTE: This product is a Paint to Order
Black Earth 90200827EGS $349.95 90200826EGS accessory. Please allow for an average
Charcoal Slate 90200827BYZ $349.95 90200826BYZ of 5 weeks’ delivery for this item.
Dantes Black (CVO) 90200827EWC $349.95 90200826EWC
Model Family Fitment: Hightail Yellow Pearl (CVO) 90200827ETY $349.95 90200826ETY
Magnetic Gray with Wineberry/Red Pepper 90201906EHX $349.95 90201907EHX
V-ROD SPORTSTER DYNA Magnetic Gray 90200827EHU $349.95 90200826EHU
SOFTAIL TOURING Moonlight Blue 90200827EMA $349.95 90200826EMA
Sand Dune 90200827ELV $349.95 90200826ELV
E. HANDLEBAR THERMOMETER – 1.5" BLACK F. HANDLEBAR MOUNT CLAMP – CHROME
Smoky Gray 90200827ELX $349.95 90200826ELX
Wicked Orange Pearl (CVO) 90200827ETX $349.95 90200826ETX
LIGHTING
See and be seen. With Harley-Davidson Genuine
Motor Parts and Accessories headlamps, brake
lights and auxiliary lighting, you get improved
visibility in front of you and more attention from
all around you.
610 LIGHTING LIGHTING 611
LED Decorative Lighting LED Decorative Lighting
A. SPECTRA GLO™ LED LIGHTING CONTROLLER KIT* C. SPECTRA GLO™ LED LIGHT POD KIT*
Nothing draws attention at the curb like a well-lighted bike. Light Pods allow you to install general lighting almost
Whether you are looking for a rich neon glow or a pulsing anywhere on the bike. Ground-facing pod placement provides
crowd pleaser, the Harley-Davidson® Spectra Glo™ Lighting a neon-like pool of light on the pavement, and pods hidden
System brings ultra-bright LED lighting to your ride. The below the tank or behind covers reflect into chrome surfaces
Spectra Glo System utilizes RGB LED technology to produce to double the splash of color. These compact flexible pods
over 500 shades of brilliant color, all controllable with a water- feature connectors that allow the lights to be chained together
proof handheld wireless fob. Simply use one button to select in longer strips or placed individually and connected by jumper
one of the 7 base colors, and then dial in the shade you desire. wires. Each pod features 3 individual RGB LEDs, and includes
You can choose to match the color of your bike, or add a a tough adhesive backing for easy placement. Begin the instal-
contrasting tone from the wide spectrum of colors. Once you lation with the 6-Lamp Starter Kit, and add on with one or
select a color, you can choose between solid, flash or fade more 4-Lamp Expansion Kits. Starter Kit includes 6 light pods,
modes with a tap of the remote control. 4 – 3" jumpers, 1 – 8" jumper and 1 – 24" jumper. Expansion
Kit includes 4 light pods, 3 – 3" jumpers, and 1 – 8" jumper.
At the core of the Spectra Glo system is the Lighting Controller.
The compact waterproof controller box is hidden beneath the 68000213 6-Lamp Starter Kit.
seat, and is activated with the included wireless remote fob. Fits all models. (except RA1250, RA1250S and RH1250).
A. SPECTRA GLO LED LIGHTING CONTROLLER KIT – FOB
The Lighting Controller is the hub for all the added Spectra Glo Requires separate purchase of Controller P/N 68000218.
light options, and syncs the color and mode selection between Additional alternate length harnesses are available (sold
all the LEDs. Designed specifically for Harley-Davidson separately).
motorcycles, the controller will not interfere with the bike’s 68000214 4-Lamp Expansion Kit.
electronics. The low draw LED lamps have a one-hour auto- Fits all models equipped with an Spectra Glo™ Light Pod Kit.
shutoff feature to preserve the battery. Kit includes Controller, Additional alternate length harnesses are available (sold
Remote Control Fob with battery and plug-in wiring harness. separately).
68000218 C. SPECTRA GLO LED LIGHT POD KIT C. SPECTRA GLO LED LIGHT POD KIT
Also available: (not shown)
Required for use with Spectra Glo components. ’18-later (RED SETTING SHOWN) (GREEN SETTING SHOWN)
SPECTRA GLO WIRE HARNESS KIT
Softail® and ’17-later Touring models require purchase of
Required for installation of Spectra Glo Lighting System on
Vehicle Connection Kit P/N 69201526. All other vehicles
specified models.
require purchase of Vehicle Connection Kit P/N 69201636.
LIGHTING
69201636
B. SPECTRA GLO™ LED FAIRING VENT LIGHT* Required for installation of Spectra Glo Lighting System on
Spectra Glo™ Fairing Vent Light fills the Batwing Split Stream all models (except ’17-later Touring® and Trike, ’18-later
Fairing Vent with a subtle glow. The 12-LED array mounts Softail®, ’20-later LiveWire® and all Revolution® Max models.)
behind the fairing vent trim for a diffused look. The low-profile
lamp array does not block airflow and does not interfere with Also available: (not shown)
the vent function. Kit includes LED array, mounting template, SPECTRA GLO LIGHTING WIRING JUMPERS
installation hardware and wiring harness. These wiring harnesses are custom made for easy plug-and
play installation of Spectra Glo Light Pods. Plan your instal-
68000194
lation, and select the matching harness lengths to allow
Fits ’14-’19 Electra Glide®, Street Glide®, Ultra Limited, and Tri
placement of light pods throughout the vehicle. No cutting or
Glide® models. Requires separate purchase of Spectra Glo™
SPECTRA GLO LIGHTING splicing is required.
LED LIghting Controller Kit P/N 68000218.
(RED SETTING SHOWN)
Works with Spectra Glo Light Pod Base and Expansion Kits.
69201525 3" Jumper Harness.
69201529 8" Jumper Harness.
69201530 24" Jumper Harness.
69201595 24" Jumper with Grommet.
69201625 48" Jumper Harness.
69201594 Y-Harness.
C. SPECTRA GLO LED LIGHT POD KIT C. SPECTRA GLO LED LIGHT POD KIT
(BLUE SETTING SHOWN) (ORANGE SETTING SHOWN)
B. ELECTRA GLO™ FAIRING EDGE LIGHT KIT and the plug-in headlamps require no rewiring.
Amplify your ride. The Electra Glo™ Fairing Edge Light kit adds
forward-facing white LED accent lights to the front profile of
your bike. Formed to follow the contour of the batwing fair-
ing, the slim strip of lamps adds a strong visual element to
the iconic shape of the Electra Glide model. The electrify-
ing appearance adds conspicuity to get you noticed and the
7" DAYMAKER PROJECTOR 7" DAYMAKER ADAPTIVE
smoked housing conceals the lights and blends into the back- LED HEADLAMP LED HEADLAMP
ground when switched off. Simple “plug in” connections with Offering best-in-class punch of light, these Delivering the right amount of usable light
no cutting or splicing of wires required.
headlamps illuminate the road in front of you, exactly where you need it most – you will see
68000104
Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri yet are directed slightly downward to avoid ditch to ditch, and down the road with lean
Glide models. Separate purchase of Power Extension blinding oncoming drivers, making them perfect angle controlled bank lighting for improved
Harness P/N 69200921 is required if installed with Hidden for highway riding situations. line of sight through corners.
AM/FM/WB Antenna P/N 76000513 or Electra Glo Light
Rings.
• Extensive engineering and testing to ensure the road in front of you is equally lit • Includes all features and benefits of the 7" Daymaker Projector LED Headlamp
C. ELECTRA GLO ILLUMINATED WINDSHIELD TRIM • No dark spots or streaks in light illumination • Automatically projects light into corners to illuminate areas of previously unlit road
Smoked lenses hide bands of amber LED lamps that glow as
• Plug and play headlamps can be installed easily • Patented sensors and electronics determine lean angle of the motorcycle
running lamps when the ignition is on, and the two outer clus- A. ELECTRA GLO ILLUMINATED FAIRING ACCENT TRIM – TURN SIGNAL
ters function as auxiliary directional indicators when the turn • Adaptive technology works in both low beam and high beam
signals are activated. The wiring is concealed inside the fair-
ing for a clean, custom appearance. Complete kit includes all
necessary mounting hardware.
Adaptive technology adjusts with your
Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri
Glide models. Installation on CVO models requires removal of lean angle, adding light to increase
current windshield trim. Not for use with Three-Pocket Fairing visibility through corners.
Pouch P/N 93300054B.
57000394A Chrome.
57000395A Gloss Black.
HIGH BEAM
LOW BEAM
PUNCH
SPREAD
B. ELECTRA GLO FAIRING EDGE LIGHT KIT
STANDARD LIGHT
Chrome
ADAPTIVE LIGHT