Professional Documents
Culture Documents
FEATURES
File No.:E75887 ・FCC Pt 68
・Small Package
・Fully sealed
・PC Pin
・Sensitive type and standard type are available
Electrical Life 5×105 operations resistive load 24VDC,1A COIL DATA at 23°C
1×105 operations resistive load 120VAC,0.5A Standard Type
Nominal Pick-up Drop-out Max. Coil
Voltage Voltage Allowable
Voltage Voltage Resistance
CHARACTERISTICS VDC
(Max.)
VDC
(Min.)
VDC VDC Ω±10%
3 2.1 0.3 3.3 20
Insulation Resistance 100MΩ (at 500VDC)
5 3.5 0.5 5.5 56
Dielectric Between coil & contacts 1000VAC 1min
6 4.2 0.6 6.6 80
Strength Between open contacts 500VAC 1min
9 6.3 0.9 9.9 180
Operate time (at nomi. volt.) ≤10ms
12 8.4 1.2 13.2 320
Release time (at nomi. volt.) ≤5ms
24 16.8 2.4 26.4 1280
Humidity 35% ~ 85% RH 48 33.6 4.8 52.8 5120
Ambient temperature -25°C ~ +70°C Sensitive Type
Pick-up Drop-out Max.
Shock Functional 98m/s 2 Nominal Voltage Voltage Coil
Allowable
Resistance Voltage (Max.) (Min.) Voltage Resistance
Destructive 980m/s 2
VDC VDC VDC VDC Ω±10%
Vibration resistance 10Hz ~ 55Hz 1.5mm DA 3 2.1 0.3 4.8 45
Unit weight Approx. 4g 5 3.5 0.5 8.0 120
This datasheet is for customers' reference. All the specifications are subject to change without notice.
4
BAS/BS/SC SERIES SPDT 1,2,5 Amp
.3(7.62)
(11.2) (10.9) (7.62)
.125 .4(10.16)
(3.2) .1(2.54) .4(10.16) .1(2.54)
.3(7.62)
(11.2) (7.62)
.125 .4(10.16)
(3.2) .1(2.54)
.4(10.16) .1(2.54)
Remark:1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be ±0.2mm; outline dimension
>1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
CHARACTERISTIC CURVES
ENDURANCE CURVE COIL TEMPERATURE RISE OPERATE TIME
Temperature Rise (K)
Time (ms)
Operations (×100000 OPS)
Operate time
Release time
This datasheet is for customers' reference. All the specifications are subject to change without notice.