Professional Documents
Culture Documents
Functions 0i-MC M70 21i-MB M70 18i-MB 720NP-M 31i-A 730M Remarks
Package A (Type B) (Type A)
1. CPU Processor,Control axes,Related Base Specification
(1.1) RISC CPU Processor ● ● ● ● ●32 bit ● ● ● M70/700 Built-in new RISC 64 bit CPU
32 bit RISC 64 bit 32 bit RISC 64 bit ▲RISC 64 RISC 64 bit RISC 64 RISC 64 bit
(1.2) Maximal number of NC axes 4 4 5 6 8 6 12 16
(1.3) Maximal number of Spindles □2 □2 □2 □2 □3 □4 □6 □4
(1.4) Max. number of simultaneous contouring control axes 4 4 4 4 4 4 4 4 M750M is a export restriction control system
● 1μ ● 1μ ● 1μ ● 1μ M730M/M750M Series support Nano command function
(1.5) Leaset control increment ● 0.1μ ●10nm ▲ 0.1μ ●10nm ▲ 0.01μ ●10nm ▲1nm ●1nm M70/720 Series support 10nano command
●640M ●600M ▲Max.1280M ●600M ▲Max.2560M ●600M ▲640M ●5120M
(1.6) Max. program capacity (Meter or KB)(1Meter=0.4KB) (400 programs) (400 programs) (512KB) (400 programs) (2MB) (400 programs) Max.8MB (1000 programs) M730M/M750M is standrad H/W, support by option parameter setting (5120m=2MB)
(1.7) Extended workpiece coordinate system selection ●6 sets ●6 sets ●6 sets ●54 sets
(G54~G59+G54.1P1~48/96) ●54 (6+48) sets ●54 (6+48) sets ▲54 sets ●54 (6+48) sets ▲300 sets ●54 (6+48) sets ▲300 sets Max.102 sets
(1.8) Max. variable number (#100~#199,#500~#999) ● 600 sets ● 600 sets ● 600 sets ● 600 sets ● 600 sets ● 600 sets ● 600 sets ● 600 sets
●400 sets ●400 sets ●400 sets
(1.9) Tool offset amount ●400 sets ●400 sets ●400 sets ●400 sets ▲999 sets ●400 sets ▲2000 sets ▲999 sets
2.Display unit related specifications
(2.1) Monochrome LCD display unit □(7.2 inch) X □(7.2 inch) X X X X X
(2.2) 8.4/10.4/15 inch color display unit (TFT Type) □(8.4/10.4 inch) □(8.4/10.4 inch) □(8.4/10.4 inch) □(8.4/10.4 inch) □(10.4 inch) X □ X
(2.3) WinCE Terminal (8.4 inch type TFT) (VGA) X X X X X □ X □
(2.4) WinCE Terminal (10.4 inch type TFT) (VGA) X X X X X □ X □
(2.5) WinPe Terminal (10.4 inch type TFT) (VGA) X X X X X □(WinXPe) X □(WinXPe)
(2.6) WinPe Terminal (15 inch type TFT) (VGA) X X X X X □ X □
(2.7) Handy Terminal Display unit ▲ ★(H/W) ▲ ★(H/W) ▲ ▲(H/W) ▲ ▲(H/W) Using NC-Designer S/W (HT fucntion) to layout displasy screen
3.High speed & High accuracy machining control related functions
(3.1) High accuracy conrol 1 (G8P1/G61.1) X ● ▲ APC ● ▲ APC ● X ●
▲AIAPC ▲AIAPC
(3.2) High speed & High accuracy machining control ●AIAPC ▲AICC I
●(16.8m/min) ▲AI CC ●(16.8m/min) ▲AI CC ●(16.8m/min) ●(33.7m/min)
mode I (G05.1Q1) ▲AICC
▲AI Nano CC ▲AI Nano CC
▲ ▲ ▲ ▲ This control interpolates while smoothing the changes in the segments distributed to each axis element
(3.13) S-pattern filter control ● ● ● ●
(Bell-type) (Bell-type) (Bell-type) (Bell-type) with vector accuracy interpolation
(3.14) Position-dependent gradually increasing-type
X X X ● X ● ▲ ●
backlash compensation
(3.15) Ball screw thermal expansion compensation ▲ ● ▲ ● ▲ ● ▲ ●
4.Language display & Graphic check related functions
M700/70 series supports 15 countries language display
(4.1) Display language selection ▲12 ●15(★Turkish) ▲12 ●15(★Turkish) ▲12 ●15(★Turkish) ▲12 ●15(★Turkish) (WinCE system suport English+1 forigen language display )
● ● WinCE system could not support this function.
X X ▲ ★ ▲ ▲
(4.2) 3D Solid program check function (Windows XP) (Windows XP)
(4.3) Graphic check and Graphic trace ● ● ● ● ● ● ● ●
Specifications change without notice Page 1/2 Made by ME-TWN FA Division NC_TS Department Date:2007/11/30
Fanuc's specification for your reference only
MITSUBISHI CNC:70/700M Series Comparison List With FANUC (version D) ●:Standard ▲:Optional □:Selection X:N/A ★:Planning
(5.4) Program Restart after NC Power outage X ● X ● X ● ▲ ● when machining program is interrupted in the middle due to tool breakage or power outage,etc.,by
press one key then automatically searching a block that was last executed at the interruption.
(5.5) Vertical axis anti-drop function at power outage ▲ ● ▲ ● ▲ ● ▲ ● Power supply unit commands to retract a gravity axis immediately on detecting a power outage,so as
to prevent a crash with a wokpiece.
(5.6) Tapping retract ▲ ● ▲ ● ▲ ● ▲ ● Even when tapping is interrupted due to emergency stop or power outage,etc.,a retraction of the tool
out of a workpiece can be automatically carried out at the restart of the operation.
(5.7) Tool position offset (G45~G48) ● ● ● ● ● ● ● ●
(5.8) Special fixed cycle X ● X ● X ● X ●
(G12/13/G34/G35/G36/G37.1/G75)
(5.9) Scaling Function (G50/G51) ● ● ● ● ● ● ● ●
(5.10) Coordinate rotation by program (G68/G69) ● ● ● ● ● ● ● ●
● ● ▲ ● ● ● ● ●
(5.11) Deep hole synchronous tapping (Could return to R point) Useing BASE parameter #1272 bit4 select the tap cycle (pecking or deep hole tap cycle)
X X X ● X ● X ● High-speed error compensation function adopted for spindle and servo control enables high-accuracy
(5.12) High-Speed synchronous tapping (OMR-DDC) tapping
(5.13) High-Speed DI/DO refresh cycle X X X ● X ● X ●
X ● X ● X ● X ● When the sequence No. (N No.) is input once, the sequence No. to which a constant value is added
(5.20) Adding Sequence No. (N No.) Automatically can be automatically added to each block of the machining program
6. Maintenance & Others related functions
●(ATA) ●(ATA) ●(ATA) ● ●(ATA) ● The PCMCIA slot on the front can be completely contained in the display unit and USB port on the
●(Front CF card) ●(Front CF card)
(6.1) IC Card and USB port on the front of display unit X(USB) X(USB) X(USB) (ATA&USB) X(USB) (ATA&USB) front of display unit
● ● ● ● ● ● ● ● Up to the three most recent backup data can be restored,the backup execution timing can be set with
(6.2) Data backup function (Manual & Automatic backup) (Manual) (Auto&Manual) (Manual) (Auto&Manual) (Manual) (Auto&Manual) (Manual) (Auto&Manual) parameter (#8915~#8919)
(6.3) Menu list function X ● X ● X ● X ● The menu list is a function that displays each screen's menu configuration as a list
(6.4) G-Code guidance function X ● X ● X ● X ●
(6.5) Parameter/Operation guidance (Help Function) X ● X ● X ● X ●
(6.6) Alarm guidance (Help Function) X ● X ● X ● X ●
(6.7) Program input mistake check function X X X X X ● ▲ ● This enables the input mistake check for the program being edited
(6.8) Program operation condition check X X X X X ★ ▲ ★
(6.9) Customization (NC Designer) function ▲ ● ▲ ● ▲ ● ▲ ● M700/70 Series : H/W is not required ( using NC Designer software)
▲ ● ▲ ● ▲ ● ▲ ●
(6.10) Simplified programming Function (NAVI-MILL)
(Manual guide i) (NAVI-MILL) (Manual guide i) (NAVI-MILL) (Manual guide i) (NAVI-MILL) (Manual guide i) (NAVI-MILL)
M70/700 Series built-in function (H/W is not required)
● Servo guide ● ● Servo guide ● ● Servo guide ● ● Servo guide ● The servo parameters can be automatically adjusted by connecting CNC and MS configurator,which is
(6.11) Servo automatic tuning S/W (MS-Configrator) an application that runs on a regular PC.
(6.12) Credit system X ▲ X ▲ X ▲ ▲ ▲
7.Servo and Spindle drive system
High-speed optical communication (10 times faster than before model)
(7.1) High-speed optical communication between NC ● ● ● ● High-speed communication cycle (1/8 compared to before model)
and Servo /Spindle Drives (SVJ3/SPJ3) (SVJ3/SPJ3) (SVJ3/SPJ3) (MDS-D-Vx/SP) MDS-D-Vx/SP Series is using for AC 220VAC spec. and MDS-DH-Vx/SP Series is using for AC
● (MDS-D-Vx/SP) ● (MDS-D-Vx/SP) ● (MDS-D-Vx/SP) ● 400VAC spec.
● ● ● ● MDS-D Series : the cycle of control loop compare with MDS-B/C1 Series
(7.2) Servo system control method (High-Gain Control II) (D-Vx/SVJ3) (D-Vx/SVJ3) (MDS-D-Vx) (MDS-D-Vx) (Current Loop) :1/5
(To improve Basic Servo system performance) ● High-Gain Control ● High-Gain Control ● High-Gain Control ●HRV2 High-Gain Control (Speed Loop) :1/2
HRV1~3 II HRV1~3 II HRV1~3 II ▲HRV3~4 II (Position Loop):1/2
260Kp/rev encoder : OSA18(code name:A48)
(7.3)Servo Motor Detector Specification ●(1000Kp/rev) (260Kp/rev) ●(1000Kp/rev) (260Kp/rev) ●(1000Kp/rev) ●(1000Kp/rev) ●(1000Kp/rev) ●(1000Kp/rev) 1000Kp/revencoder : OSA105S5(code name:A51)
▲(16000Kp/rev) (1000Kp/rev) ▲(16000Kp/rev) (1000Kp/rev) ▲(16000Kp/rev) ▲(16000Kp/rev) ▲(16000Kp/rev) ▲(16000Kp/rev) 16000Kp/revencoder: OSA166S5(code name:A74)
Specifications change without notice / Fanuc's specification for your reference only Page 2/2 Made by ME-TWN FA Division NC_TS Department Date:2007/11/30