Professional Documents
Culture Documents
Extended and improved to meet evolving needs Ni-Cd for proven reliability
Alcad’s Single Cell range has now been upgraded, featuring three significant advances: even when operating in difficult
and demanding conditions
■■ Broader range – additional capacities enable sizing a battery more precisely to
requirements for the optimum, most cost-effective solution. ■■ elivers performance, reliability and
D
a long, totally predictable service
■■ Lower maintenance – water topping-up interval is up to two times longer,
life – with no risk of sudden death
contributing to reduced battery maintenance and lower overall TCO.
failure.
■■ Improved chargeability – faster recharge time maximises performance for better
■■ Ensures a 20+ years service life at
system reliability and continuity.
+ 25°C (+ 77°F).
■■ Even at + 35°C (+ 95°F), service life
LCE / LBE… P MC / MB… P HC / HB… P
is reduced by just 20% compared
Range of cells 58 68 47 with 50% for a lead-acid battery.
Characteristics • Thick plates • Medium power • Thin plates Define the ideal battery for
• High energy • Optimised between • High power every application
• Low cost per H and L design for • Low cost per
mixed loads ■■ P erformance optimised for each
Ampere at low Ampere at high
rates rates application according to the plate
thickness.
Performance For low rate discharge For varied loads For high rate
over long period with low and high discharge over short ■■ Optimised design boosts electrical
between 1 and 100 discharge rate periods less than 30 performance by up to 10%
hours or medium rate minutes
discharge between 30 depending on discharge time.
minutes and 3 hours
■■ More capacity steps enabling the
Applications Power back-up applications Power back-up and battery to be sized more closely to
starting applications
exact requirements.
Low maintenance contributes Typical topping-up interval at recommended charge voltage
to lower overall TCO 12
■■ Topping-up interval extended by up
to 2 times in standard conditions at 10
LCE/LBE range
2
0
20 25 30 35 40 ºC
68 77 86 95 104 ºF
Temperature
90%
discharged conditions at float in 15
80%
hours. 0.2 C5A
70%
60% 0.1 C5A
50%
40%
30%
20%
10%
0%
Compliant to highest standards 0 5 10 15 20 25 30
■■ Electrical characteristics Charge time (hours)
change without notice and become contractual only after written confirmation
●● Certified IEC 60623