Professional Documents
Culture Documents
Generated 05/19/2022
Performing Calculations and Sizing
Using the process data that you have entered you can now calculate the bore of the orifice
plate 101-FE -100 and size your control valve 101-FV -100. You perform these procedures in
the Calculation module.
The calculation sheet for the selected instrument is displayed with instrument
process data already populated.
7. On the module toolbar, click (Calculate) to open the Flowmeter Calculation dialog
box, where you can calculate the orifice diameter.
12. Close the Flowmeter Calculation dialog box to return to the Flowmeter Calculation
window.
14. Click and type a revision. For details, see Define Process Data for a Line (see Define
Line Process Data).
2. On the Enter Tag Number dialog box, type the instrument tag number
101-FV-100 and click OK to display the calculation sheet for the control valve
instrument.
3. Ensure that the Line Number field displays 4"-P-1501-11H and all highlighted fields in
the Properties section contain data as shown.
4. On the toolbar, click (Calculate) to open the Control Valve Calculation dialog box
where you calculate and size the control valve.
The results are displayed on completion of the calculation as shown for: Cv, Regime,
and Noise.
7. When done, click Close to return to the Control Valve Calculation window.
10. Click to open the Revisions dialog box, and type a revision.
Copyright
Copyright© Hexagon AB and/or its subsidiaries and affiliates. All rights reserved.