system construction and horizontal and civil application engineering High drainage capacity DELTA®-MS 20 in double-shell structures. Technical Data (typical values): DELTA®-MS 20 ... Material Special high density PE
DELTA® is a registered trademark of Ewald Dörken AG, Herdecke, Germany
Dimple height 25/32” (20 mm) approx. is a compression-resistant, durable particles into the drainage void. Compressive 2 2 ˜3120 lbs/ft (150kNm approx.) dimpled sheet made from special controls rising underground water strength high density polyethylene. when laid horizontally between the Drainage 48 gal/min/ft (10l/s-m ) approx. capacity offers outstanding safety thanks to its foundation and the surface layer of a Air gap between 0.343 gal/ft2 (14l/m2) approx. 25/36” (20 mm) dimples and its high carriageway, and conveys it towards dimples drainage capacity. the drain. Service -22oF to + 176oF (-30oC to +80oC) temperature range resists degradation in soil and is ideal for coping with water-related Fire resistance Standard flammability as per chemical attack as well as being non- problems in tunnel construction. rating DIN 4102 class B2; optional DIN 4102 class B1 polluting for drinking water. With the dimples facing outward, the for special requirements may be applied as a cost-efficient sheet forms a continuous system of Roll size 65.6 ft x 6.5 ft ( 20 m x 2 m) horizontal or vertical permanent channels by which water is guided shuttering between a shotcrete towards the drain. DELTA®-MS 20 perforated Technical data as for DELTA®-MS 20 except shell or curtain wall and a concrete in the perforated version is a special Compressive 2 2 ˜2297 lbs/ft (110kNm approx.) structural wall. high-capacity sheet for draining roof strength drains off water emerging from surfaces such as parking decks Drainage 0.5 l (s x m2) the rocky subsoil when vertically and roof gardens. Because of their capacity at 1 cm water column applied. porosity, sheets are permeable so shotcrete shell acts as a filter, that surplus water will drain away preventing migration of fine grain evenly.
Concrete or reinforced floor topping.
DELTA®-MS 20
CD 01/08 3M Printed in Canada
Edge drain.
Inclined foundation slab.
The information printed in this brochure reflects product information Cosella-Dörken Products Inc. and specifications at the date of printing. The manufacturer reserves 4655 Delta Way the right to make changes when necessary. Beamsville, Ontario L0R 1B4 (905) 563-3255 Fax: (905) 563-5582 1-888-4 DELTA 4 info@cosella-dorken.com DELTAMS.com
A company of the Dörken Group DELTA®-branded quality products manufactured by Cosella-Dörken.