2. Select a pair with about 8% to 12% consistent difference on currency strength meter. both pair must be below 60% and above 30% 3. On M15 this 8 to 12% difference will make a support and resistance level wait for the 2 tests 4. Indicators: 10ema, 21ema, 50ema, 200sma RSI, ATR, MACD, tani signal, tani supply, tani strength meter. 5. If the 10and21ema is above the 50ema and 200sma only focus on buy 6. If the 10and21ema is below the 50ema and 200sma only focus on sell 7. Use the cross over of 10 ema and 21ema as buy or sell signal And then use RSI value of above 70 and below 30 as another buy or sell confirmation 8. After verifying this if you are buying then m1 to h1 must have a buy signal according to the rsi to get a strong win predictability 9. See ATR to determine your stop loss and market volatility 10. For entry wait for a candle stick pattern or see price action for over bought and over sold to see when to enter 11. Set tp according to the support and resistance level or an rsi level 12. Close the trade after reaching half tp target if see a massive % change in the strength meter against you or you see high volatility in ATR if u see the change in your favor increase tp size .