Professional Documents
Culture Documents
Drawing Templates
Drawing Templates
You can also accomplish the same thing using Drawing Templates. This
procedure varies slightly from the File New operation in that here you first
open the master model part, then select a Drawing Template from your
resource bar. When you import the Drawing Template, a new master model
drawing is created. The template is then added to it and the master model
part you previously opened becomes a component of the work part.
Drawing Templates are based on XML functionality which allow you to
access standard templates containing drawing formats, title block text, and
predetermined drawing views.
The template files are established by you or your company according to your
standards. They can include:
Drawing Templates are accessed from the resource bar. The resource bar
points to a Drawing Template Resource file (.pax).
This file (.pax) points to the individual drawing format files.
NX supplies you with a set of drawing templates along with a .pax
file located in your UGII_ROOT_DIR under the html_files folder. For
more information on Drawing Template Resource Files, refer to the
Help Documentation.
General procedure
General Procedure for setting up and using Drawing Templates:
• Create a Palette for the resource bar (PreferencesPalettes..., select
resource bar tab).
• Select the drawing template from the palette in the resource bar.
14
Activity: Create a master model drawing using drawing templates
In this activity, you will create a palette for the Drawing Templates and have
the button added to the resource bar. You will then create the drawing.
Step 1: Open drf_fork_caster.
14
Step 2: Inspect the structure of this part from the Assembly Navigator.
Open the Assembly Navigator from the resource bar.
14
14
14
drf_fork_caster_dwg2
drf_fork_caster