Software Version: 3.8.3.0
DAIKIN MALAYSIA SDN. BHD.
(Formerly known as OYL Manufacturing Company Sdn. Bhd.)
FCU TECHNICAL REPORT
Project Name Report Date 2102/2021
Address Customer
Selection by
Unit Naming: Room 1
Model: EWWO6L (60112) EWWO6L 60112) [6]
Selection Taput
Tntemal Tube Fluid Water Aude om
Gayeot 0%
Cooling Heating
Indoor Dry Bulb Temp, 27.00 °C Indoor Dry Bulb Temp. -e
Indoor Wet Bulb Temp, 19900 °c Water Inlet Temp. =
Water Inlet Temp, 700 °c Water ‘Temp, Drop =
Water Temp. Rise 500 °c Leaving Dry Bulb Temp.** 9c
Leaving Dry Bulb Temp.** 1553 °C
Leaving Wet Bulb Temp.** 13.86 °C
Unit Specification
eight 310mm Coll Medium Water Fin Length 858) a
Dept 24 mm ‘Tube Material Copper Tube Diameter 7 mim
Width 1065 mm Fin Material Aluminium Tube Thickness 028 mom
Weight 4 ke No of Row 2 Fin Thickness 0.11 mom
Sound Press, Level 46 ABA, Tube Height 6 Noof Circuits 6
Sound Power $8 apa, FPL Is Fin Patera st
Performance Data
‘Air Flow Data ‘Cooling Capacity Heating Capacity
Selected Fan Speed HIGH. Total Capacity 528 AW Total Capacity ~ kw
Air Flow 1053 mihr_——‘Sensible capacity 4.10 Ww Water Flow rate = Ls
TsP : Pa Water Flow rte 025 Lis Pressure Drop = kPa
sP : Pa Pressure Drop 360 kPa
Face Velocity LOL mis
Fan And Motor Data*
Motor Data Fan Dati
Input Power 2 w Starting Current 0.43 A Fan Absorb power 32.16 w
Motor size 32 w Motor Efficiency 48 Fan Efficiency 20.9
Rusning Current 034 A, Motor RPM 1250
“Base on standard rating condition,
** For teference ony.
Disclaimer: The results are based on simulation and may not be accurate or reflect the actual condition. While all reasonable attempis have been
rade to ensure accuracy, curency and rlibilty ofthe conten, all information is provided "es is". There is no guarantee as to the completeness,
accuracy, timeliness or the results obtained from the use of this information. Daikin Malaysia Sdn, Bhd. can not be held responsible forthe
correctness, completeness or quality of the information provided by this software. Therefore, liability claims regarding any damages caused by
‘the use of any information provided, including information which is incomplete or incorect, will be discarded
The certification of the software has to be verified in www.euroventcertification.com