You are on page 1of 1
Software Version: 3.8.1.2 DAIKIN MALAYSIA SDN. BHD. (Formerly known as OYL Manufacturing Company Sdn. Bhd.) FCU TECHNICAL REPORT Project Name Report Date 2102/2021 Address Customer Selection by Unit Naming: Room 1 Model EWEOTD (60112) FWEOTD (60112) 2] Selection Taput Tntemal Tube Fluid Water Aude om Gayeot 0% Cooling Heating Indoor Dry Bulb Temp, 27.00 °C Indoor Dry Bulb Temp. -e Indoor Wet Bulb Temp, 19900 °c Water Inlet Temp. = Water Inlet Temp, 700 °c Water ‘Temp, Drop = Water Temp. Rise 500 °c Leaving Dry Bulb Temp.** 9c Leaving Dry Bulb Temp.** lant °c Leaving Wet Bulb Temp.** 1265 °C Unit Specification eight 2 mm Coll Medium Water Fin Length 940) a Depth: 670mm ‘Tube Material Copper Tube Diameter 9.52 mim Width 214mm Fin Material Aluminium Tube Thickness 03, mom Weight 45 ke No of Row 3 Fin Thickness 0.11 mom Sound Press. Level ST ABA, Tube Height 10 Noof Circuits Sound Power apa, FPL 2 Fin Patera st Performance Data ‘Air Flow Data ‘Cooling Capacity Heating Capacity Selected Fan Speed HIGH Total Capacity 721 AW Total Capacity ~ kw Air Flow 1186 mBihr—— Sensible capacity 5.19 iW Water Flow rate = Ls TsP : Pa WaterFlow mie 034 Lis Pressure Drop = kPa sP : Pa Pressure Drop 496 kPa Face Velocity 138 mis Fan And Motor Data* Motor Data Fan Dati Input Power mow Starting Current 1.16 A Fan Absorb power 74.316 w Motor size 6s w ‘Motor Efficiency 56.3 Fan Efficiency 29.9 Running Current 057A. Motor RPM 1400 “Base on standard rating condition, ** For teference ony. Disclaimer: The results are based on simulation and may not be accurate or reflect the actual condition. While all reasonable attempis have been rade to ensure accuracy, curency and rlibilty ofthe conten, all information is provided "es is". There is no guarantee as to the completeness, accuracy, timeliness or the results obtained from the use of this information. Daikin Malaysia Sdn, Bhd. can not be held responsible forthe correctness, completeness or quality of the information provided by this software. Therefore, liability claims regarding any damages caused by ‘the use of any information provided, including information which is incomplete or incorect, will be discarded The certification of the software has to be verified in www.euroventcertification.com

You might also like