Professional Documents
Culture Documents
com/prevaled
PrevaLED® Compact Z2
Product Features
• Rectangular, flat emitter LED module
• Zhaga1 compliant light engine:
PrevaLED® Compact plus OPTOTRONIC® LED
power supply with LEDset interface
• Asymmetric light distribution
• Dimmable to 20% of the nominal output power
• Overheating protection via temperature sensor
Application
• Suitable for outdoor applications in fixtures
with IP54
• Street lighting
• Residential lighting
• Area lighting
• Industrial areas with high ceilings
Product Benefits
• Extremely compact, high-performance module with an efficiency of up to 140 lm/W
• Suitable for various areas of application due to high luminous efficiency
• Very long lifetime: 100.000 h with L80B10 (at Tc = 80 °C)
• Light engine interchangeable and future-proof thanks to Zhaga1 conformity
• Reversible thermal protection
• Utilizes robust and durable OSRAM OSLON® Square LEDs
• Plug&Play approach with OSRAM OPTOTRONIC® LED power supplies with LEDset interface
1
According to Zhaga Book 4. For more Information on Zhaga please visit www.zhagastandard.org
Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and does not necessarily correspond to the
actual parameters of each single product which could differ from the typical data. Typical performance data are subject to change without any further notice, particularly as LED technology
evolves.
2
At module level
®
Figure 1: PrevaLED Compact light distribution
Thermal Protection
PrevaLED® Compact are thermally protected, when used in combination with an OSRAM
OPTOTRONIC® LED power supply with LEDset interface. The system behaviour is shown in Figure 2.
®
Figure 2: PrevaLED Compact thermal protection via LEDset interface
®
Figure 3: : PrevaLED dimensions type CT2
PL-CP-Z2-6000-740
PL-CP-Z2-6000-757
PL-CP-Z2-8000-740
PL-CP-Z2-8000-757
PL-CP-Z2-10000-740
PL-CP-Z2-10000-757
®
Figure 4: : PrevaLED dimensions type CT3
®
Figure 5: PrevaLED Compact Cable (separate product)
PrevaLED Compact
PrevaLED Compact
PrevaLED Compact
® ®
Figure 6: Sample wiring, PrevaLED Compact to OPTOTRONIC power supplies with LEDset
The modules are intended for operation with matching OPTOTRONIC® power supplies with LEDset interface
To further simplify the luminaire/installation approval, electronic control gear for LED modules should carry the CE mark and be
ENEC certified. In Europe the declarations of conformity must include the following standards:
CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 (also IEC/EN 62384, if available).
Also check for the mark of an independent authorized certification institute.
Please see the relevant brochure for more detailed information (see "Related and Further Information")
OSRAM OPTOTRONIC® electronic control gears comply to all relevant standards and guarantee safe operation.
Ordering codes
EAN40
Product EAN10* EAN40
Shipping unit
Support
OSRAM GmbH