Professional Documents
Culture Documents
5 and Sa 3
BLASTING GRADES B Sa 1 and Sa 2
BLASTING GRADES B Sa 2.5 and Sa 3
BLASTING GRADES C Sa 1 and Sa 2
BLASTING GRADES C Sa 2.5 and Sa 3
BLASTING GRADES D Sa 1 and Sa 2
BLASTING GRADES D Sa 2.5 and Sa 3
BLASTING GRADES, COMPARISONS
BLASTING GRADES, COMPARISONS
SURFACE PROFILE ASSESSMENT
SURFACE COMPARATOR TO BS 7079 Pt C, ISO 8503
Shot blast
comparator.
Not to be used for surface
cleanliness. Only for
assessment of shot
blasted substrates.
Grit blast comparator can
also be used on substrates
blasted with grit/shot mix
SURFACE PREPARATION
HAND AND POWER TOOL CLEANING B St 2 and St 3
SURFACE PREPARATION
HAND AND POWER TOOL CLEANING C St 2 and St 3
SURFACE PREPARATION
HAND AND POWER TOOL CLEANING D St 2 and St 3
SURFACE PREPARATION FLAME CLEANING
SURFACE PREPARATION FLAME CLEANING
DRY ABRASIVE BLASTING
MEASURING PRESSURE AT THE NOZZLE
HYPODERMIC NEEDLE
GAUGE
Insert the needle through
the hose with the needle
towards the nozzle, at an
angle of app.
45 degrees
Dial Micrometre And Surface Replica Tape
SURFACE PROFILE
NEEDLE GAUGE
Gauge must be calibrated
to zero on a flat, smooth
glass plate, set to zero,
and lock the bezel in
place.
LIMPET GAUGE
Magnetic,
Contact
WAIT 15 mins
BEFORE
READING
Measuring Steel
Temperatures
THERMOCOUPLE
ELECTRONIC,
CONTACT
IMMEDIATE
READING
WHIRLING
HYGROMETER
HEALTH AND SAFETY
COSHH Regulations
(Control of substances hazardous to health )
CORROSIVE
TOXIC OR VERY TOXIC HARMFUL OR IRRITANT