- Silencer suitably optimized to meet stringent sound emission - Programmable I/O (2 inputs and 2 outputs) expandable with standards as laid down by MOEF / CPCB AUX101/102 modules - Base rail with integral fuel tank is provided with a drain plug, air - Low Fuel Level Fault Inputs vent, inlet and outlet connections, level indicator, manhole etc. - Self-Configuring PCCNet Network - Sub-base fuel tank of 700 litres capacity - InPower Compatible (PC based service tool) - 2 x 12 V dry, uncharged batteries with connecting leads and - NFPA110 Level 1 Compliant terminals - ISO8528-4:1993 Compliance - CE Compliant Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. Acoustic enclosure:
The control panel consists of the following parts:
- PC 1.2 Controller - Aluminum bus bars with suitable capacity with in/outgoing terminals - Instrument fuses duly wired and ferruled - MCCB of suitable rating with overload and short circuit - Specially designed to meet stringent MOEF/ CPCB norms of protections 75 dBA @ 1mtr at 75% load under free field conditions - Designed to have optimum serviceability Genset controller PC 1.2 - Air inlet louvers specially designed to operate at rated load - Basic stand-alone Genset control system even at 50 deg C air inlet temp. - Feature laden modular Genset control system - Made on special purpose CNC machines for consistency in - Part of our modular and interchangeable control product line quality and workmanship - Powder coated for long lasting service life and superior finish PMG compatibility and extra inputs and communication - With UV resistant powder coating, can withstand extreme capability (ModBus & CAN), are the major advantages. environment - Use of stainless steel hardware Features: - Insulation material meets exacting IS 8183 specs for better attenuation - Digital voltage regulation - SAE J1939 Interface to Full Authority Electronic (FAE) engines Optionals - Engine Metering: Oil Pressure, Coolant Temperature, Battery Voltage, Engine Speed Engine: Heavy duty air cleaner, lube oil / coolant heater with - AC Alternator Metering: L-L Voltage and N voltage (phase and thermostatic switch average), Current (phase and total), Volt-Amperes (phase and Alternator: Thermistors, PMG excitation, space heater total), and Frequency. Control panel: "PowerCommand® Control Panel (PC 3.3)" for - Engine Protection: Low Lube Oil Pressure, High Coolant microprocessor based governing, regulation, metering, Temperature, Over speed, DC Over/Under/Weak Volts, Fail to monitoring and auto synchronising control system. AMF control Crank/Start, Sensor Failure. panel, battery charger, remote/ auto start panel, auto/ manual - AC Alternator Protection: Over/Under Voltage, Over/Under synchronizing panel and audio/ visual annunciation for faults. Frequency, Over Current & Loss of AC Sensing. - Fault Codes and Description on HMI Others: Mobile sets with canopy - Data Logging: Engine Hours, Engine Starts and 10 Fault Codes - Control Set-Up without PC-based tool (InPower) - Configurable Glow Plug Control as an optional - Configurable Cycle Cranking - 12 and 24 Volt DC Operation - Easy Wiring connectors for factory connections, terminal blocks for field connections