Professional Documents
Culture Documents
Identification System in M30 Housing BIS C-60R-001-08P-PU
Identification System in M30 Housing BIS C-60R-001-08P-PU
BIS C-60R-001-08P-PU-_ _
The simplest parallel read-only system for 8 bits
The BIS C-60R-001-08P... The stored information is Installation drawing BIS C-60R-001-08P-PU-_ _
is designed as a read-only made available on the
system. outputs as soon as the 95
code tag enters the active 78
Before a read operation
zone of the read head and
M30x1.5
can take place, the three
the data check is positive. L
surface
bytes on the code tag
active
starting with Address 0 Bending
Ø8.3
radius
must be pre-programmed.
>50 mm
Ø110
Programming example
Code tag Bit number User data Check data 13 5 LED data valid
Address 7 6 5 4 3 2 1 0 36
Clear zone
in metal
00 0 0 0 0 0 1 0 0 04 Hex For mounting, use the included
01 1 1 1 1 1 0 1 1 FB Hex ³32 M30x1.5 jam nuts!
02 1 1 1 1 1 0 1 1 FB Hex
BIS C-128.
The integrated LED indi- Output Bit 2 OG
cates system status. Output Bit 3 YE
Output Bit 4 GN
Output Bit 5 BU
Output Bit 6 VT
Output Bit 7 GR
Data Valid BK
Read distances
Axial offset (mm) LED function display
Code tag type Read at read distance Output
distance 1 mm 3 mm 5 mm 7 mm LED Status "Data valid"
BIS C-122-04/L (∅10) 0...2.5 mm ±2 No code tag Off Low
BIS C-130-05/L (∅16 0...4.0 mm ±5 ±3 Code tag present On High
BIS C-117-05/A (∅30) 1...8.0 mm ±7 ±6 ±4 ±3 "Data check error" slowly flashing Low
BIS C-128-05/L (∅26) 0...12.0 mm ±10 ±10 ±9 ±9 Short circuit on output rapidly flashing Low
Balluff GmbH
Schurwaldstraße 9 Phone +49 (0) 71 58/1 73-0
73765 Neuhausen a.d.F. Telefax +49 (0) 71 58/50 10
Germany E-Mail: balluff@balluff.de
english 2